(* This file is part of the Catala build system, a specification language for tax and social benefits computation rules. Copyright (C) 2020 Inria, contributors: Denis Merigoux , Emile Rolley Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. *) open Cmdliner open Utils open Ninja_utils module Nj = Ninja_utils (** {1 Command line interface} *) let files_or_folders = Arg.( non_empty & pos_right 0 file [] & info [] ~docv:"FILE(S)" ~doc:"File(s) or folder(s) to process") let command = Arg.( required & pos 0 (some string) None & info [] ~docv:"COMMAND" ~doc:"Command selection among: test, run") let debug = Arg.(value & flag & info ["debug"; "d"] ~doc:"Prints debug information") let reset_test_outputs = Arg.( value & flag & info ["r"; "reset"] ~doc: "Used with the `test` command, resets the test output to whatever is \ output by the Catala compiler.") let catalac = Arg.( value & opt (some string) None & info ["e"; "exe"] ~docv:"EXE" ~doc:"Catala compiler executable, defaults to `catala`") let ninja_output = Arg.( value & opt (some string) None & info ["o"; "output"] ~docv:"OUTPUT" ~doc: "$(i, OUTPUT) is the file that will contain the build.ninja file \ output. If not specified, the build.ninja file will be outputed in \ the temporary directory of the system.") let scope = Arg.( value & opt (some string) None & info ["s"; "scope"] ~docv:"SCOPE" ~doc: "Used with the `run` command, selects which scope of a given Catala \ file to run.") let makeflags = Arg.( value & opt (some string) None & info ["makeflags"] ~docv:"LANG" ~doc: "Provides the contents of a $(i, MAKEFLAGS) variable to pass on to \ Ninja. Currently recognizes the -i and -j options.") let catala_opts = Arg.( value & opt (some string) None & info ["c"; "catala-opts"] ~docv:"LANG" ~doc:"Options to pass to the Catala compiler") let clerk_t f = Term.( const f $ files_or_folders $ command $ catalac $ catala_opts $ makeflags $ debug $ scope $ reset_test_outputs $ ninja_output) let version = "0.5.0" let info = let doc = "Build system for Catala, a specification language for tax and social \ benefits computation rules." in let man = [ `S Manpage.s_description; `P "$(b,clerk) is a build system for Catala, a specification language for \ tax and social benefits computation rules"; `S Manpage.s_commands; `I ( "test", "Tests a Catala source file given expected outputs provided in a \ directory called `output` at the same level that the tested file. \ If the tested file is `foo.catala_en`, then `output` should contain \ expected output files like `foo.catala_en.$(i,BACKEND)` where \ $(i,BACKEND) is chosen among: `Interpret`, `Dcalc`, `Scalc`, \ `Lcalc`, `Typecheck, `Scopelang`, `html`, `tex`, `py`, `ml` and `d` \ (for Makefile dependencies). For the `Interpret` backend, the scope \ to test is selected by naming the expected output file \ `foo.catala_en.$(i,SCOPE).interpret`. When the argument of \ $(b,clerk) is a folder, it recursively looks for Catala files \ coupled with `output` directories and matching expected output on \ which to perform tests." ); `I ( "run", "Runs the Catala interpreter on a given scope of a given file. See \ the `-s` option." ); `S Manpage.s_authors; `P "Denis Merigoux "; `P "Emile Rolley "; `S Manpage.s_examples; `P "Typical usage:"; `Pre "clerk test file.catala_en"; `S Manpage.s_bugs; `P "Please file bug reports at https://github.com/CatalaLang/catala/issues"; ] in let exits = Cmd.Exit.defaults @ [Cmd.Exit.info ~doc:"on error." 1] in Cmd.info "clerk" ~version ~doc ~exits ~man (**{1 Testing}*) type expected_output_descr = { tested_filename : string; (** Name of the file that's being tested *) output_dir : string; (** Name of the output directory where all expected outputs are stored *) id : string; (** Id of this precise unit test that will be associated to an expected output *) cmd : string; (** Catala command to launch to run the test, excluding "catala" at the begin, and the name of the file to test *) } let catala_suffix_regex = Re.Pcre.regexp "\\.catala_(\\w){2}$" (** [readdir_sort dirname] returns the sorted subdirectories of [dirname] in an array or an empty array if the [dirname] doesn't exist. *) let readdir_sort (dirname : string) : string array = try let dirs = Sys.readdir dirname in Array.fast_sort String.compare dirs; dirs with Sys_error _ -> Array.make 0 "" (** Given a file, looks in the relative [output] directory if there are files with the same base name that contain expected outputs for different *) let search_for_expected_outputs (file : string) : expected_output_descr list = let output_dir = Filename.dirname file ^ Filename.dir_sep ^ "output/" in File.with_in_channel file (fun ic -> (* Matches something of the form: {v ```catala-test { id="foo" } catala Interpret -s A ``` v} *) let test_rex = Re.compile (Re.( seq [ bol; str "```catala-test"; opt @@ seq [ rep space; char '{'; rep space; str "id"; rep space; char '='; rep space; char '"'; group (rep1 (diff any (char '"'))); char '"'; rep space; char '}'; ]; rep space; char '\n'; seq [str "catala"; rep space; group (rep1 (diff any (char '\n')))]; ])) in let file_str = really_input_string ic (in_channel_length ic) in let test_declarations = Re.all test_rex file_str in List.map (fun groups -> let id = match Re.Group.get_opt groups 1 with | Some x -> x | None -> Errors.raise_error "A test declaration is missing its identifier in the file %s" file in let cmd = Re.Group.get groups 2 in { tested_filename = file; output_dir; cmd; id }) test_declarations) [@ocamlformat "disable"] let add_reset_rules_aux ~(redirect : string) ~(rule_name : string) (catala_exe_opts : string) (rules : Rule.t Nj.RuleMap.t) : Rule.t Nj.RuleMap.t = let reset_common_cmd_exprs = Nj.Expr. [ Var "catala_cmd"; Var "tested_file"; Var "extra_flags"; Lit "--unstyled"; Lit "--output=/dev/stdout"; Lit redirect; Var "expected_output"; Lit "2>&1"; Lit "|| true"; ] in let reset_rule = Nj.Rule.make rule_name ~command:Nj.Expr.(Seq (Lit catala_exe_opts :: reset_common_cmd_exprs)) ~description: Nj.Expr.( Seq [ Lit "RESET"; Lit "file"; Var "tested_file"; Lit "with the"; Var "catala_cmd"; Lit "command"; ]) in Nj.RuleMap.(rules |> add reset_rule.name reset_rule) let add_test_rules_aux ~(rule_name : string) (catala_exe_opts : string) (rules : Rule.t Nj.RuleMap.t) : Rule.t Nj.RuleMap.t = let test_rule = Nj.Rule.make rule_name ~command: Nj.Expr.( Seq (Lit catala_exe_opts :: [ Var "catala_cmd"; Var "tested_file"; Var "extra_flags"; Lit "--unstyled"; Lit "--output=/dev/stdout"; Lit "2>&1 | colordiff -u -b"; Var "expected_output"; Lit "-"; ])) ~description: Nj.Expr.( Seq [ Lit "TEST on file"; Var "tested_file"; Lit "with the"; Var "catala_cmd"; Lit "command"; ]) in Nj.RuleMap.(rules |> add test_rule.name test_rule) (** [add_reset_rules catala_exe_opts rules] adds ninja rules used to reset test files into [rules] and returns it.*) let add_reset_rules (catala_exe_opts : string) (rules : Rule.t Nj.RuleMap.t) : Rule.t Nj.RuleMap.t = add_reset_rules_aux ~rule_name:"reset_rule" ~redirect:">" catala_exe_opts rules (** [add_test_rules catala_exe_opts rules] adds ninja rules used to test files into [rules] and returns it.*) let add_test_rules (catala_exe_opts : string) (rules : Rule.t Nj.RuleMap.t) : Rule.t Nj.RuleMap.t = add_test_rules_aux ~rule_name:"test_rule" catala_exe_opts rules (** [ninja_start catala_exe] returns the inital [ninja] data structure with rules needed to reset and test files. *) let ninja_start (catala_exe : string) (catala_opts : string) : ninja = let catala_exe_opts = catala_exe ^ " " ^ catala_opts in let run_and_display_final_message = Nj.Rule.make "run_and_display_final_message" ~command:Nj.Expr.(Seq [Lit ":"]) ~description: Nj.Expr.( Seq [Lit "All tests"; Var "test_file_or_folder"; Lit "passed!"]) in { rules = Nj.RuleMap.( empty |> add_reset_rules catala_exe_opts |> add_test_rules catala_exe_opts |> add run_and_display_final_message.name run_and_display_final_message); builds = Nj.BuildMap.empty; } (** [collect_all_ninja_build ninja tested_file catala_exe catala_opts reset_test_outputs] creates and returns all ninja build statements needed to test the [tested_file]. *) let collect_all_ninja_build (ninja : ninja) (tested_file : string) (reset_test_outputs : bool) : (string * ninja) option = let expected_outputs = search_for_expected_outputs tested_file in if List.length expected_outputs = 0 then ( Cli.debug_print "No expected outputs were found for test file %s" tested_file; None) else let ninja, test_names = List.fold_left (fun (ninja, test_names) expected_output -> let expected_output_file = expected_output.output_dir ^ Filename.basename expected_output.tested_filename ^ "." ^ expected_output.id ^ ".out" in let vars = [ "catala_cmd", Nj.Expr.Lit expected_output.cmd; "tested_file", Nj.Expr.Lit tested_file; "expected_output", Nj.Expr.Lit expected_output_file; ] and rule_to_call = if reset_test_outputs then "reset_rule" else "test_rule" in let ninja_add_new_build (rule_output : string) (rule : string) (vars : (string * Nj.Expr.t) list) (ninja : ninja) : ninja = { ninja with builds = Nj.BuildMap.add rule_output (Nj.Build.make_with_vars ~outputs:[Nj.Expr.Lit rule_output] ~rule ~vars) ninja.builds; } in ( ninja_add_new_build expected_output_file rule_to_call vars ninja, test_names ^ " $\n " ^ expected_output_file )) (ninja, "") expected_outputs in let test_name = tested_file |> (if reset_test_outputs then Printf.sprintf "reset_file_%s" else Printf.sprintf "test_file_%s") |> Nj.Build.unpath in Some ( test_name, { ninja with builds = Nj.BuildMap.add test_name (Nj.Build.make_with_inputs ~outputs:[Nj.Expr.Lit test_name] ~rule:"phony" ~inputs:[Nj.Expr.Lit test_names]) ninja.builds; } ) (** [add_root_test_build ninja all_file_names all_test_builds] add the 'test' ninja build declaration calling the rule 'run_and_display_final_message' for [all_test_builds] which correspond to [all_file_names]. *) let add_root_test_build (ninja : ninja) (all_file_names : string list) (all_test_builds : string) : ninja = let file_names_str = List.hd all_file_names ^ "" ^ List.fold_left (fun acc name -> acc ^ "; " ^ name) "" (List.tl all_file_names) in { ninja with builds = Nj.BuildMap.add "test" (Nj.Build.make_with_vars_and_inputs ~outputs:[Nj.Expr.Lit "test"] ~rule:"run_and_display_final_message" ~inputs:[Nj.Expr.Lit all_test_builds] ~vars: [ ( "test_file_or_folder", Nj.Expr.Lit ("in [ " ^ file_names_str ^ " ]") ); ]) ninja.builds; } (**{1 Running}*) let run_file (file : string) (catala_exe : string) (catala_opts : string) (scope : string) : int = let command = String.concat " " (List.filter (fun s -> s <> "") [catala_exe; catala_opts; "-s " ^ scope; "Interpret"; file]) in Cli.debug_print "Running: %s" command; Sys.command command (** {1 Driver} *) let get_catala_files_in_folder (dir : string) : string list = let rec loop result = function | f :: fs -> let f_is_dir = try Sys.is_directory f with Sys_error e -> Cli.warning_print "skipping %s" e; false in if f_is_dir then readdir_sort f |> Array.to_list |> List.map (Filename.concat f) |> List.append fs |> loop result else loop (f :: result) fs | [] -> result in let all_files_in_folder = loop [] [dir] in List.filter (Re.Pcre.pmatch ~rex:catala_suffix_regex) all_files_in_folder type ninja_building_context = { last_valid_ninja : ninja; curr_ninja : ninja option; all_file_names : string list; all_test_builds : string; all_failed_names : string list; } (** Record used to keep tracks of the current context while building the [Ninja_utils.ninja].*) (** [ninja_building_context_init ninja_init] returns the empty context corresponding to [ninja_init]. *) let ninja_building_context_init (ninja_init : Nj.ninja) : ninja_building_context = { last_valid_ninja = ninja_init; curr_ninja = Some ninja_init; all_file_names = []; all_test_builds = ""; all_failed_names = []; } (** [collect_in_directory ctx file_or_folder ninja_start reset_test_outputs] updates the building context [ctx] by adding new ninja build statements needed to test files in [folder].*) let collect_in_folder (ctx : ninja_building_context) (folder : string) (ninja_start : Nj.ninja) (reset_test_outputs : bool) : ninja_building_context = let ninja, test_file_names = List.fold_left (fun (ninja, test_file_names) file -> match collect_all_ninja_build ninja file reset_test_outputs with | None -> (* Skips none Catala file. *) ninja, test_file_names | Some (test_file_name, ninja) -> ninja, test_file_names ^ " $\n " ^ test_file_name) (ninja_start, "") (get_catala_files_in_folder folder) in let test_dir_name = Printf.sprintf "test_dir_%s" (folder |> Nj.Build.unpath) in let curr_ninja = if 0 = String.length test_file_names then None else Some { ninja with builds = Nj.BuildMap.add test_dir_name (Nj.Build.make_with_vars_and_inputs ~outputs:[Nj.Expr.Lit test_dir_name] ~rule:"run_and_display_final_message" ~inputs:[Nj.Expr.Lit test_file_names] ~vars: [ ( "test_file_or_folder", Nj.Expr.Lit ("in folder '" ^ folder ^ "'") ); ]) ninja.builds; } in if Option.is_some curr_ninja then { ctx with last_valid_ninja = ninja_start; curr_ninja; all_file_names = folder :: ctx.all_file_names; all_test_builds = ctx.all_test_builds ^ " $\n " ^ test_dir_name; } else { ctx with last_valid_ninja = ninja_start; curr_ninja; all_failed_names = folder :: ctx.all_failed_names; } (** [collect_in_file ctx file_or_folder ninja_start reset_test_outputs] updates the building context [ctx] by adding new ninja build statements needed to test the [tested_file].*) let collect_in_file (ctx : ninja_building_context) (tested_file : string) (ninja_start : Nj.ninja) (reset_test_outputs : bool) : ninja_building_context = match collect_all_ninja_build ninja_start tested_file reset_test_outputs with | Some (test_file_name, ninja) -> { ctx with last_valid_ninja = ninja; curr_ninja = Some ninja; all_file_names = tested_file :: ctx.all_file_names; all_test_builds = ctx.all_test_builds ^ " $\n " ^ test_file_name; } | None -> { ctx with last_valid_ninja = ninja_start; curr_ninja = None; all_failed_names = tested_file :: ctx.all_failed_names; } (** {1 Return code values} *) let return_ok = 0 let return_err = 1 (** {1 Driver} *) (** [add_root_test_build ctx files_or_folders reset_test_outputs] updates the [ctx] by adding ninja build statements needed to test or [reset_test_outputs] [files_or_folders]. *) let add_test_builds (ctx : ninja_building_context) (files_or_folders : string list) (reset_test_outputs : bool) : ninja_building_context = files_or_folders |> List.fold_left (fun ctx file_or_folder -> let curr_ninja = match ctx.curr_ninja with | Some ninja -> ninja | None -> ctx.last_valid_ninja in if Sys.is_directory file_or_folder then collect_in_folder ctx file_or_folder curr_ninja reset_test_outputs else collect_in_file ctx file_or_folder curr_ninja reset_test_outputs) ctx let makeflags_to_ninja_flags (makeflags : string option) = match makeflags with | None -> "" | Some makeflags -> let ignore_rex = Re.(compile @@ word (char 'i')) in let has_ignore = Re.execp ignore_rex makeflags in let jobs_rex = Re.(compile @@ seq [str "-j"; group (rep digit)]) in let number_of_jobs = try int_of_string (Re.Group.get (Re.exec jobs_rex makeflags) 1) with _ -> 0 in String.concat " " [(if has_ignore then "-k0" else ""); "-j" ^ string_of_int number_of_jobs] let driver (files_or_folders : string list) (command : string) (catala_exe : string option) (catala_opts : string option) (makeflags : string option) (debug : bool) (scope : string option) (reset_test_outputs : bool) (ninja_output : string option) : int = try if debug then Cli.debug_flag := true; let ninja_flags = makeflags_to_ninja_flags makeflags in let files_or_folders = List.sort_uniq String.compare files_or_folders and catala_exe = Option.fold ~none:"catala" ~some:Fun.id catala_exe and catala_opts = Option.fold ~none:"" ~some:Fun.id catala_opts and ninja_output = Option.fold ~none:(Filename.temp_file "clerk_build" ".ninja") ~some:Fun.id ninja_output in match String.lowercase_ascii command with | "test" -> ( Cli.debug_print "building ninja rules..."; let ctx = add_test_builds (ninja_building_context_init (ninja_start catala_exe catala_opts)) files_or_folders reset_test_outputs in let there_is_some_fails = 0 <> List.length ctx.all_failed_names in let ninja = match ctx.curr_ninja with | Some ninja -> ninja | None -> ctx.last_valid_ninja in if there_is_some_fails then List.iter (fun f -> f |> Cli.with_style [ANSITerminal.magenta] "%s" |> Cli.warning_print "No test case found for %s") ctx.all_failed_names; if 0 = List.compare_lengths ctx.all_failed_names files_or_folders then return_ok else try File.with_formatter_of_file ninja_output (fun fmt -> Cli.debug_print "writing %s..." ninja_output; Nj.format fmt (add_root_test_build ninja ctx.all_file_names ctx.all_test_builds)); let ninja_cmd = "ninja " ^ ninja_flags ^ " test -f " ^ ninja_output in Cli.debug_print "executing '%s'..." ninja_cmd; Sys.command ninja_cmd with Sys_error e -> Cli.error_print "can not write in %s" e; return_err) | "run" -> ( match scope with | Some scope -> let res = List.fold_left (fun ret f -> ret + run_file f catala_exe catala_opts scope) 0 files_or_folders in if 0 <> res then return_err else return_ok | None -> Cli.error_print "Please provide a scope to run with the -s option"; return_err) | _ -> Cli.error_print "The command \"%s\" is unknown to clerk." command; return_err with Errors.StructuredError (msg, pos) -> Cli.error_print "%s" (Errors.print_structured_error msg pos); return_err let main () = exit (Cmdliner.Cmd.eval' (Cmdliner.Cmd.v info (clerk_t driver)))