DarkFlippers/unleashed-firmware
1
1
Fork 0
mirror of https://github.com/DarkFlippers/unleashed-firmware.git synced 2024-12-21 04:11:48 +03:00
Code Issues Projects Releases Wiki Activity
389ff92cc1
unleashed-firmware/lib/ST25RFAL002/source/st25r3916/rfal_analogConfigTbl.h

1478 lines
85 KiB
C
Raw Normal View History

Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/******************************************************************************
* \attention
*
* <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* www.st.com/myliberty
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*
* PROJECT: ST25R391x firmware
* Revision:
* LANGUAGE: ISO C99
*/
/*! \file rfal_analogConfig.h
*
* \author bkam
*
* \brief ST25R3916 Analog Configuration Settings
*
*/
#ifndef ST25R3916_ANALOGCONFIG_H
#define ST25R3916_ANALOGCONFIG_H
/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "rfal_analogConfig.h"
#include "st25r3916_com.h"
/*
******************************************************************************
* DEFINES
******************************************************************************
*/
/*
******************************************************************************
* GLOBAL MACROS
******************************************************************************
*/
/*! Macro for Configuration Setting with only one register-mask-value set:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1] */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_1_REG(MODE, R0, M0, V0) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 1, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only two register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1] */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_2_REG(MODE, R0, M0, V0, R1, M1, V1) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 2, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only three register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_3_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 3, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only four register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_4_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 4, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only five register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_5_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 5, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only six register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_6_REG( \
MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 6, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only seven register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_7_REG( \
MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 7, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only eight register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_8_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 8, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only nine register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_9_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 9, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with only ten register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_10_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 10, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with eleven register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_11_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 11, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8U), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with twelve register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_12_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10, \
R11, \
M11, \
V11) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 12, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8U), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10), \
(uint8_t)((uint16_t)(R11) >> 8U), (uint8_t)((R11)&0xFFU), (uint8_t)(M11), (uint8_t)(V11)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with thirteen register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_13_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10, \
R11, \
M11, \
V11, \
R12, \
M12, \
V12) \
(uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE)&0xFFU), 13, \
(uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8U), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10), \
(uint8_t)((uint16_t)(R11) >> 8U), (uint8_t)((R11)&0xFFU), (uint8_t)(M11), (uint8_t)(V11), \
(uint8_t)((uint16_t)(R12) >> 8U), (uint8_t)((R12)&0xFFU), (uint8_t)(M12), (uint8_t)(V12)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with fourteen register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_14_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10, \
R11, \
M11, \
V11, \
R12, \
M12, \
V12, \
R13, \
M13, \
V13, \
R14, \
M14, \
V14, \
R15, \
M15, \
V15) \
(uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE)&0xFFU), 14, \
(uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10), \
(uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11)&0xFFU), (uint8_t)(M11), (uint8_t)(V11), \
(uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12)&0xFFU), (uint8_t)(M12), (uint8_t)(V12), \
(uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13)&0xFFU), (uint8_t)(M13), (uint8_t)(V13)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with fifteen register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_15_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10, \
R11, \
M11, \
V11, \
R12, \
M12, \
V12, \
R13, \
M13, \
V13, \
R14, \
M14, \
V14, \
R15, \
M15, \
V15) \
(uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE)&0xFFU), 15, \
(uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10), \
(uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11)&0xFFU), (uint8_t)(M11), (uint8_t)(V11), \
(uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12)&0xFFU), (uint8_t)(M12), (uint8_t)(V12), \
(uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13)&0xFFU), (uint8_t)(M13), (uint8_t)(V13), \
(uint8_t)((uint16_t)(R14) >> 8), (uint8_t)((R14)&0xFFU), (uint8_t)(M14), (uint8_t)(V14)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with sixteen register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_16_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10, \
R11, \
M11, \
V11, \
R12, \
M12, \
V12, \
R13, \
M13, \
V13, \
R14, \
M14, \
V14, \
R15, \
M15, \
V15) \
(uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE)&0xFFU), 16, \
(uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10), \
(uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11)&0xFFU), (uint8_t)(M11), (uint8_t)(V11), \
(uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12)&0xFFU), (uint8_t)(M12), (uint8_t)(V12), \
(uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13)&0xFFU), (uint8_t)(M13), (uint8_t)(V13), \
(uint8_t)((uint16_t)(R14) >> 8), (uint8_t)((R14)&0xFFU), (uint8_t)(M14), (uint8_t)(V14), \
(uint8_t)((uint16_t)(R15) >> 8), (uint8_t)((R15)&0xFFU), (uint8_t)(M15), (uint8_t)(V15)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*! Macro for Configuration Setting with seventeen register-mask-value sets:
* - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
#define MODE_ENTRY_17_REG( \
MODE, \
R0, \
M0, \
V0, \
R1, \
M1, \
V1, \
R2, \
M2, \
V2, \
R3, \
M3, \
V3, \
R4, \
M4, \
V4, \
R5, \
M5, \
V5, \
R6, \
M6, \
V6, \
R7, \
M7, \
V7, \
R8, \
M8, \
V8, \
R9, \
M9, \
V9, \
R10, \
M10, \
V10, \
R11, \
M11, \
V11, \
R12, \
M12, \
V12, \
R13, \
M13, \
V13, \
R14, \
M14, \
V14, \
R15, \
M15, \
V15, \
R16, \
M16, \
V16) \
(uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE)&0xFFU), 17, \
(uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0)&0xFFU), (uint8_t)(M0), (uint8_t)(V0), \
(uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1)&0xFFU), (uint8_t)(M1), (uint8_t)(V1), \
(uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2)&0xFFU), (uint8_t)(M2), (uint8_t)(V2), \
(uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3)&0xFFU), (uint8_t)(M3), (uint8_t)(V3), \
(uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4)&0xFFU), (uint8_t)(M4), (uint8_t)(V4), \
(uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5)&0xFFU), (uint8_t)(M5), (uint8_t)(V5), \
(uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6)&0xFFU), (uint8_t)(M6), (uint8_t)(V6), \
(uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7)&0xFFU), (uint8_t)(M7), (uint8_t)(V7), \
(uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8)&0xFFU), (uint8_t)(M8), (uint8_t)(V8), \
(uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9)&0xFFU), (uint8_t)(M9), (uint8_t)(V9), \
(uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10)&0xFFU), (uint8_t)(M10), (uint8_t)(V10), \
(uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11)&0xFFU), (uint8_t)(M11), (uint8_t)(V11), \
(uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12)&0xFFU), (uint8_t)(M12), (uint8_t)(V12), \
(uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13)&0xFFU), (uint8_t)(M13), (uint8_t)(V13), \
(uint8_t)((uint16_t)(R14) >> 8), (uint8_t)((R14)&0xFFU), (uint8_t)(M14), (uint8_t)(V14), \
(uint8_t)((uint16_t)(R15) >> 8), (uint8_t)((R15)&0xFFU), (uint8_t)(M15), (uint8_t)(V15), \
(uint8_t)((uint16_t)(R16) >> 8), (uint8_t)((R16)&0xFFU), (uint8_t)(M16), (uint8_t)(V16)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/*
******************************************************************************
* GLOBAL DATA TYPES
******************************************************************************
*/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
/* PRQA S 3406 1 # MISRA 8.6 - Externally generated table included by the library */ /* PRQA S 1514 1 # MISRA 8.9 - Externally generated table included by the library */
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
const uint8_t rfalAnalogConfigDefaultSettings[] = {
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Chip-Specific Reset ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
MODE_ENTRY_17_REG(
(RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_INIT),
ST25R3916_REG_IO_CONF1,
(ST25R3916_REG_IO_CONF1_out_cl_mask | ST25R3916_REG_IO_CONF1_lf_clk_off),
0x07 /* Disable MCU_CLK */
,
ST25R3916_REG_IO_CONF2,
(ST25R3916_REG_IO_CONF2_miso_pd1 | ST25R3916_REG_IO_CONF2_miso_pd2),
0x18 /* SPI Pull downs */
,
ST25R3916_REG_IO_CONF2,
ST25R3916_REG_IO_CONF2_aat_en,
ST25R3916_REG_IO_CONF2_aat_en /* Enable AAT */
,
ST25R3916_REG_TX_DRIVER,
ST25R3916_REG_TX_DRIVER_d_res_mask,
0x00 /* Set RFO resistance Active Tx */
,
ST25R3916_REG_RES_AM_MOD,
0xFF,
0x80 /* Use minimum non-overlap */
,
ST25R3916_REG_FIELD_THRESHOLD_ACTV,
ST25R3916_REG_FIELD_THRESHOLD_ACTV_trg_mask,
ST25R3916_REG_FIELD_THRESHOLD_ACTV_trg_105mV /* Lower activation threshold (higher than deactivation)*/
,
ST25R3916_REG_FIELD_THRESHOLD_ACTV,
ST25R3916_REG_FIELD_THRESHOLD_ACTV_rfe_mask,
ST25R3916_REG_FIELD_THRESHOLD_ACTV_rfe_105mV /* Lower activation threshold (higher than deactivation)*/
,
ST25R3916_REG_FIELD_THRESHOLD_DEACTV,
ST25R3916_REG_FIELD_THRESHOLD_DEACTV_trg_mask,
ST25R3916_REG_FIELD_THRESHOLD_DEACTV_trg_75mV /* Lower deactivation threshold */
,
ST25R3916_REG_FIELD_THRESHOLD_DEACTV,
ST25R3916_REG_FIELD_THRESHOLD_DEACTV_rfe_mask,
ST25R3916_REG_FIELD_THRESHOLD_DEACTV_rfe_75mV /* Lower deactivation threshold */
,
ST25R3916_REG_AUX_MOD,
ST25R3916_REG_AUX_MOD_lm_ext,
0x00 /* Disable External Load Modulation */
,
ST25R3916_REG_AUX_MOD,
ST25R3916_REG_AUX_MOD_lm_dri,
ST25R3916_REG_AUX_MOD_lm_dri /* Use internal Load Modulation */
,
ST25R3916_REG_PASSIVE_TARGET,
ST25R3916_REG_PASSIVE_TARGET_fdel_mask,
(5U
<< ST25R3916_REG_PASSIVE_TARGET_fdel_shift) /* Adjust the FDT to be aligned with the bitgrid */
,
ST25R3916_REG_PT_MOD,
(ST25R3916_REG_PT_MOD_ptm_res_mask | ST25R3916_REG_PT_MOD_pt_res_mask),
0x5f /* Reduce RFO resistance in Modulated state */
,
ST25R3916_REG_EMD_SUP_CONF,
ST25R3916_REG_EMD_SUP_CONF_rx_start_emv,
ST25R3916_REG_EMD_SUP_CONF_rx_start_emv_on /* Enable start on first 4 bits */
,
ST25R3916_REG_ANT_TUNE_A,
0xFF,
0x82 /* Set Antenna Tuning (Poller): ANTL */
,
ST25R3916_REG_ANT_TUNE_B,
0xFF,
0x82 /* Set Antenna Tuning (Poller): ANTL */
,
0x84U,
0x10,
0x10 /* Avoid chip internal overheat protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Chip-Specific Poll Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_9_REG(
(RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_POLL_COMMON),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
,
ST25R3916_REG_TX_DRIVER,
ST25R3916_REG_TX_DRIVER_am_mod_mask,
ST25R3916_REG_TX_DRIVER_am_mod_12percent /* Set Modulation index */
,
ST25R3916_REG_AUX_MOD,
(ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am),
0x00 /* Use AM via regulator */
,
ST25R3916_REG_ANT_TUNE_A,
0xFF,
0x82 /* Set Antenna Tuning (Poller): ANTL */
,
ST25R3916_REG_ANT_TUNE_B,
0xFF,
0x82 /* Set Antenna Tuning (Poller): ANTL */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x00 /* Disable Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x00 /* Disable Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_correlator /* Use Correlator Receiver */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Tx 106 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_5_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_ook /* Use OOK */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x40 /* Set default Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x03 /* Set default Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x40 /* Set default Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x03 /* Set default Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Rx 106 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x08,
ST25R3916_REG_RX_CONF2,
0xFF,
0x2D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x51,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Tx 212 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
,
ST25R3916_REG_AUX_MOD,
(ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am),
0x88 /* Use Resistive AM */
,
ST25R3916_REG_RES_AM_MOD,
ST25R3916_REG_RES_AM_MOD_md_res_mask,
0x7F /* Set Resistive modulation */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x40 /* Set default Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x03 /* Set default Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x40 /* Set default Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x03 /* Set default Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Rx 212 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x02,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x14,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
/****** Default Analog Configuration for Poll NFC-A Tx 424 ******/
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
,
ST25R3916_REG_AUX_MOD,
(ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am),
0x88 /* Use Resistive AM */
,
ST25R3916_REG_RES_AM_MOD,
ST25R3916_REG_RES_AM_MOD_md_res_mask,
0x7F /* Set Resistive modulation */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x40 /* Set default Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x03 /* Set default Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x40 /* Set default Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x03 /* Set default Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Rx 424 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x42,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x54,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Tx 848 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
,
ST25R3916_REG_TX_DRIVER,
ST25R3916_REG_TX_DRIVER_am_mod_mask,
ST25R3916_REG_TX_DRIVER_am_mod_40percent /* Set Modulation index */
,
ST25R3916_REG_AUX_MOD,
(ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am),
0x00 /* Use AM via regulator */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x00 /* Disable Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x00 /* Disable Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Rx 848 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x42,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x44,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-A Anticolision setting ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_ANTICOL),
ST25R3916_REG_CORR_CONF1,
ST25R3916_REG_CORR_CONF1_corr_s6,
0x00 /* Set collision detection level different from data */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#ifdef RFAL_USE_COHE
/****** Default Analog Configuration for Poll NFC-B Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_coherent /* Use Coherent Receiver */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#else
/****** Default Analog Configuration for Poll NFC-B Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_correlator /* Use Correlator Receiver */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#endif /*RFAL_USE_COHE*/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
/****** Default Analog Configuration for Poll NFC-B Rx 106 ******/
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_106 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x04,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x1B,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-B Rx 212 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_212 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x02,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x14,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-B Rx 424 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_424 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x42,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x54,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Poll NFC-B Rx 848 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_848 |
RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
0xFF,
0x42,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x44,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#ifdef RFAL_USE_COHE
/****** Default Analog Configuration for Poll NFC-F Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_coherent /* Use Pulse Receiver */
,
ST25R3916_REG_RX_CONF1,
0xFF,
0x13,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x54,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#else
/****** Default Analog Configuration for Poll NFC-F Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_correlator /* Use Correlator Receiver */
,
ST25R3916_REG_RX_CONF1,
0xFF,
0x13,
ST25R3916_REG_RX_CONF2,
0xFF,
0x3D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x54,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x00)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#endif /*RFAL_USE_COHE*/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_1OF4 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_ook /* Use OOK */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#ifdef RFAL_USE_COHE
/****** Default Analog Configuration for Poll NFC-V Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_coherent /* Use Pulse Receiver */
,
ST25R3916_REG_RX_CONF1,
0xFF,
0x13,
ST25R3916_REG_RX_CONF2,
0xFF,
0x2D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x13,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x01)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#else
/****** Default Analog Configuration for Poll NFC-V Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_AUX,
ST25R3916_REG_AUX_dis_corr,
ST25R3916_REG_AUX_dis_corr_correlator /* Use Correlator Receiver */
,
ST25R3916_REG_RX_CONF1,
0xFF,
0x13,
ST25R3916_REG_RX_CONF2,
0xFF,
0x2D,
ST25R3916_REG_RX_CONF3,
0xFF,
0x00,
ST25R3916_REG_RX_CONF4,
0xFF,
0x00,
ST25R3916_REG_CORR_CONF1,
0xFF,
0x13,
ST25R3916_REG_CORR_CONF2,
0xFF,
0x01)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
#endif /*RFAL_USE_COHE*/
/****** Default Analog Configuration for Poll AP2P Tx 106 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_5_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_ook /* Use OOK modulation */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x40 /* Set default Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x03 /* Set default Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x40 /* Set default Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x03 /* Set default Undershoot Protection */
)
/****** Default Analog Configuration for Poll AP2P Tx 212 ******/
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
)
/****** Default Analog Configuration for Poll AP2P Tx 424 ******/
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 |
RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Chip-Specific Listen On ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_6_REG(
(RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_LISTEN_ON),
ST25R3916_REG_ANT_TUNE_A,
0xFF,
0x00 /* Set Antenna Tuning (Listener): ANTL */
,
ST25R3916_REG_ANT_TUNE_B,
0xFF,
0xff /* Set Antenna Tuning (Listener): ANTL */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x00 /* Disable Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x00 /* Disable Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Listen AP2P Tx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_7_REG(
(RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_ANT_TUNE_A,
0xFF,
0x82 /* Set Antenna Tuning (Poller): ANTL */
,
ST25R3916_REG_ANT_TUNE_B,
0xFF,
0x82 /* Set Antenna Tuning (Poller): ANTL */
,
ST25R3916_REG_TX_DRIVER,
ST25R3916_REG_TX_DRIVER_am_mod_mask,
ST25R3916_REG_TX_DRIVER_am_mod_12percent /* Set Modulation index */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x00 /* Disable Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x00 /* Disable Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x00 /* Disable Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Listen AP2P Rx Common ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_3_REG(
(RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P |
RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX),
ST25R3916_REG_RX_CONF1,
ST25R3916_REG_RX_CONF1_lp_mask,
ST25R3916_REG_RX_CONF1_lp_1200khz /* Set Rx filter configuration */
,
ST25R3916_REG_RX_CONF1,
ST25R3916_REG_RX_CONF1_hz_mask,
ST25R3916_REG_RX_CONF1_hz_12_200khz /* Set Rx filter configuration */
,
ST25R3916_REG_RX_CONF2,
ST25R3916_REG_RX_CONF2_amd_sel,
ST25R3916_REG_RX_CONF2_amd_sel_mixer /* AM demodulator: mixer */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Listen AP2P Tx 106 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_5_REG(
(RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P |
RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_ook /* Use OOK modulation */
,
ST25R3916_REG_OVERSHOOT_CONF1,
0xFF,
0x40 /* Set default Overshoot Protection */
,
ST25R3916_REG_OVERSHOOT_CONF2,
0xFF,
0x03 /* Set default Overshoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF1,
0xFF,
0x40 /* Set default Undershoot Protection */
,
ST25R3916_REG_UNDERSHOOT_CONF2,
0xFF,
0x03 /* Set default Undershoot Protection */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Listen AP2P Tx 212 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P |
RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
/****** Default Analog Configuration for Listen AP2P Tx 424 ******/
Naming and coding style convention, new linter tool. (#945) * Makefile, Scripts: new linter * About: remove ID from IC * Firmware: remove double define for DIVC/DIVR * Scripts: check folder names too. Docker: replace syntax check with make lint. * Reformat Sources and Migrate to new file naming convention * Docker: symlink clang-format-12 to clang-format * Add coding style guide
2022-01-05 19:10:18 +03:00
,
MODE_ENTRY_1_REG(
(RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P |
RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX),
ST25R3916_REG_MODE,
ST25R3916_REG_MODE_tr_am,
ST25R3916_REG_MODE_tr_am_am /* Use AM modulation */
)
Git: set git attributes to automatically manage line endings. (#771) * Git: set git attributes to automatically manage line endings. * Git: cleanup gitignore file
2021-10-18 01:54:19 +03:00
};
#endif /* ST25R3916_ANALOGCONFIG_H */
Reference in New Issue Copy Permalink