2020-10-19 01:09:48 +03:00
/******************************************************************************
* \ attention
*
* < h2 > < center > & copy ; COPYRIGHT 2020 STMicroelectronics < / center > < / h2 >
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT ( the " License " ) ;
* You may not use this file except in compliance with the License .
* You may obtain a copy of the License at :
*
* www . st . com / myliberty
*
* Unless required by applicable law or agreed to in writing , software
* distributed under the License is distributed on an " AS IS " BASIS ,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND , either express or implied ,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY ,
* FITNESS FOR A PARTICULAR PURPOSE , AND NON - INFRINGEMENT .
* See the License for the specific language governing permissions and
* limitations under the License .
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*
* PROJECT : ST25R391x firmware
* Revision :
* LANGUAGE : ISO C99
*/
/*! \file rfal_isoDep.h
*
* \ author Gustavo Patricio
*
* \ brief Implementation of ISO - DEP protocol
*
* This implementation was based on the following specs :
* - ISO / IEC 14443 - 4 2 nd Edition 2008 - 07 - 15
* - NFC Forum Digital Protocol 1.1 2014 - 01 - 14
*
*
* \ addtogroup RFAL
* @ {
*
* \ addtogroup RFAL - AL
* \ brief RFAL Abstraction Layer
* @ {
*
* \ addtogroup ISO - DEP
* \ brief RFAL ISO - DEP Module
* @ {
*
*/
# ifndef RFAL_ISODEP_H_
# define RFAL_ISODEP_H_
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* INCLUDES
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# include "platform.h"
# include "rfal_nfcb.h"
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* ENABLE SWITCH
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# ifndef RFAL_FEATURE_ISO_DEP
2022-01-05 19:10:18 +03:00
# define RFAL_FEATURE_ISO_DEP \
false /*!< ISO-DEP module configuration missing. Disabled by default */
2020-10-19 01:09:48 +03:00
# endif
/* If module is disabled remove the need for the user to set lengths */
# if !RFAL_FEATURE_ISO_DEP
2022-01-05 19:10:18 +03:00
# undef RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN
# undef RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN
2020-10-19 01:09:48 +03:00
2022-01-05 19:10:18 +03:00
# define RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN (1U) /*!< ISO-DEP I-Block max length, set to "none" */
# define RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN (1U) /*!< ISO-DEP APDU max length, set to "none" */
2020-10-19 01:09:48 +03:00
# endif /* !RFAL_FEATURE_NFC_DEP */
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* DEFINES
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
# define RFAL_ISODEP_PROLOGUE_SIZE \
( 3U ) /*!< Length of Prologue Field for I-Block Format */
# define RFAL_ISODEP_PCB_LEN \
( 1U ) /*!< PCB length */
# define RFAL_ISODEP_DID_LEN \
( 1U ) /*!< DID length */
# define RFAL_ISODEP_NAD_LEN \
( 1U ) /*!< NAD length */
# define RFAL_ISODEP_NO_DID \
( 0x00U ) /*!< DID value indicating the ISO-DEP layer not to use DID */
# define RFAL_ISODEP_NO_NAD \
( 0xFFU ) /*!< NAD value indicating the ISO-DEP layer not to use NAD */
# define RFAL_ISODEP_FWI_MASK \
( 0xF0U ) /*!< Mask bits of FWI */
# define RFAL_ISODEP_FWI_SHIFT \
( 4U ) /*!< Shift val of FWI */
# define RFAL_ISODEP_FWI_DEFAULT \
( 4U ) /*!< Default value for FWI Digital 1.0 11.6.2.17 */
# define RFAL_ISODEP_ADV_FEATURE \
( 0x0FU ) /*!< Indicate 256 Bytes FSD and Advanc Proto Feature support:NAD & DID */
# define RFAL_ISODEP_DID_MAX \
( 14U ) /*!< Maximum DID value */
# define RFAL_ISODEP_BRI_MASK \
( 0x07U ) /*!< Mask bits for Poll to Listen Send bitrate */
# define RFAL_ISODEP_BSI_MASK \
( 0x70U ) /*!< Mask bits for Listen to Poll Send bitrate */
# define RFAL_ISODEP_SAME_BITRATE_MASK \
( 0x80U ) /*!< Mask bit indicate only same bit rate D for both direction support */
# define RFAL_ISODEP_BITRATE_RFU_MASK \
( 0x08U ) /*!< Mask bit for RFU */
2020-10-19 01:09:48 +03:00
/*! Maximum Frame Waiting Time = ((256 * 16/fc) * 2^FWImax) = ((256*16/fc)*2^14) = (67108864)/fc = 2^26 (1/fc) */
2022-01-05 19:10:18 +03:00
# define RFAL_ISODEP_MAX_FWT ((uint32_t)1U << 26)
# define RFAL_ISODEP_FSDI_DEFAULT \
RFAL_ISODEP_FSXI_256 /*!< Default Frame Size Integer in Poll mode */
# define RFAL_ISODEP_FSX_KEEP (0xFFU) /*!< Flag to keep FSX from activation */
# define RFAL_ISODEP_DEFAULT_FSCI \
RFAL_ISODEP_FSXI_256 /*!< FSCI default value to be used in Listen Mode */
# define RFAL_ISODEP_DEFAULT_FSC \
RFAL_ISODEP_FSX_256 /*!< FSC default value (aligned RFAL_ISODEP_DEFAULT_FSCI) */
# define RFAL_ISODEP_DEFAULT_SFGI (0U) /*!< SFGI Default value to be used in Listen Mode */
# define RFAL_ISODEP_DEFAULT_FWI (8U) /*!< Default Listener FWI (Max) Digital 2.0 B7 & B3 */
# define RFAL_ISODEP_APDU_MAX_LEN \
RFAL_ISODEP_FSX_1024 /*!< Max APDU length */
# define RFAL_ISODEP_ATTRIB_RES_MBLI_NO_INFO \
( 0x00U ) /*!< MBLI indicating no information on its internal input buffer size */
# define RFAL_ISODEP_ATTRIB_REQ_PARAM1_DEFAULT \
( 0x00U ) /*!< Default values of Param 1 of ATTRIB_REQ Digital 1.0 12.6.1.3-5 */
# define RFAL_ISODEP_ATTRIB_HLINFO_LEN \
( 32U ) /*!< Maximum Size of Higher Layer Information */
# define RFAL_ISODEP_ATS_HB_MAX_LEN \
( 15U ) /*!< Maximum length of Historical Bytes Digital 1.1 13.6.2.23 */
# define RFAL_ISODEP_ATTRIB_REQ_MIN_LEN \
( 9U ) /*!< Minimum Length of ATTRIB_REQ command */
# define RFAL_ISODEP_ATTRIB_RES_MIN_LEN \
( 1U ) /*!< Minimum Length of ATTRIB_RES response */
# define RFAL_ISODEP_SPARAM_VALUES_MAX_LEN \
( 16U ) /*!< Maximum Length of the value field on S(PARAMETERS) */
# define RFAL_ISODEP_SPARAM_TAG_BLOCKINFO \
( 0xA0U ) /*!< S(PARAMETERS) tag Block information */
# define RFAL_ISODEP_SPARAM_TAG_BRREQ \
( 0xA1U ) /*!< S(PARAMETERS) tag Bit rates Request */
# define RFAL_ISODEP_SPARAM_TAG_BRIND \
( 0xA2U ) /*!< S(PARAMETERS) tag Bit rates Indication */
# define RFAL_ISODEP_SPARAM_TAG_BRACT \
( 0xA3U ) /*!< S(PARAMETERS) tag Bit rates Activation */
# define RFAL_ISODEP_SPARAM_TAG_BRACK \
( 0xA4U ) /*!< S(PARAMETERS) tag Bit rates Acknowledgement */
# define RFAL_ISODEP_SPARAM_TAG_SUP_PCD2PICC \
( 0x80U ) /*!< S(PARAMETERS) tag Supported bit rates from PCD to PICC */
# define RFAL_ISODEP_SPARAM_TAG_SUP_PICC2PCD \
( 0x81U ) /*!< S(PARAMETERS) tag Supported bit rates from PICC to PCD */
# define RFAL_ISODEP_SPARAM_TAG_SUP_FRAME \
( 0x82U ) /*!< S(PARAMETERS) tag Supported framing options PICC to PCD */
# define RFAL_ISODEP_SPARAM_TAG_SEL_PCD2PICC \
( 0x83U ) /*!< S(PARAMETERS) tag Selected bit rate from PCD to PICC */
# define RFAL_ISODEP_SPARAM_TAG_SEL_PICC2PCD \
( 0x84U ) /*!< S(PARAMETERS) tag Selected bit rate from PICC to PCD */
# define RFAL_ISODEP_SPARAM_TAG_SEL_FRAME \
( 0x85U ) /*!< S(PARAMETERS) tag Selected framing options PICC to PCD */
# define RFAL_ISODEP_SPARAM_TAG_LEN \
( 1 ) /*!< S(PARAMETERS) Tag Length */
# define RFAL_ISODEP_SPARAM_TAG_BRREQ_LEN \
( 0U ) /*!< S(PARAMETERS) tag Bit rates Request Length */
# define RFAL_ISODEP_SPARAM_TAG_PICC2PCD_LEN \
( 2U ) /*!< S(PARAMETERS) bit rates from PCD to PICC Length */
# define RFAL_ISODEP_SPARAM_TAG_PCD2PICC_LEN \
( 2U ) /*!< S(PARAMETERS) bit rates from PICC to PCD Length */
# define RFAL_ISODEP_SPARAM_TAG_BRACK_LEN \
( 0U ) /*!< S(PARAMETERS) tag Bit rates Acknowledgement Length */
# define RFAL_ISODEP_ATS_TA_DPL_212 \
( 0x01U ) /*!< ATS TA DSI 212 kbps support bit mask */
# define RFAL_ISODEP_ATS_TA_DPL_424 \
( 0x02U ) /*!< ATS TA DSI 424 kbps support bit mask */
# define RFAL_ISODEP_ATS_TA_DPL_848 \
( 0x04U ) /*!< ATS TA DSI 848 kbps support bit mask */
# define RFAL_ISODEP_ATS_TA_DLP_212 \
( 0x10U ) /*!< ATS TA DSI 212 kbps support bit mask */
# define RFAL_ISODEP_ATS_TA_DLP_424 \
( 0x20U ) /*!< ATS TA DRI 424 kbps support bit mask */
# define RFAL_ISODEP_ATS_TA_DLP_848 \
( 0x40U ) /*!< ATS TA DRI 848 kbps support bit mask */
# define RFAL_ISODEP_ATS_TA_SAME_D \
( 0x80U ) /*!< ATS TA same bit both directions bit mask */
# define RFAL_ISODEP_ATS_TB_FWI_MASK \
( 0xF0U ) /*!< Mask bits for FWI (Frame Waiting Integer) in TB byte */
# define RFAL_ISODEP_ATS_TB_SFGI_MASK \
( 0x0FU ) /*!< Mask bits for SFGI (Start-Up Frame Guard Integer) in TB byte */
# define RFAL_ISODEP_ATS_T0_TA_PRESENCE_MASK \
( 0x10U ) /*!< Mask bit for TA presence */
# define RFAL_ISODEP_ATS_T0_TB_PRESENCE_MASK \
( 0x20U ) /*!< Mask bit for TB presence */
# define RFAL_ISODEP_ATS_T0_TC_PRESENCE_MASK \
( 0x40U ) /*!< Mask bit for TC presence */
# define RFAL_ISODEP_ATS_T0_FSCI_MASK \
( 0x0FU ) /*!< Mask bit for FSCI presence */
# define RFAL_ISODEP_ATS_T0_OFFSET \
( 0x01U ) /*!< Offset of T0 in ATS Response */
# define RFAL_ISODEP_MAX_I_RETRYS \
( 2U ) /*!< Number of retries for a I-Block Digital 2.0 16.2.5.4 */
# define RFAL_ISODEP_MAX_R_RETRYS \
( 3U ) /*!< Number of retries for a R-Block Digital 2.0 B9 - nRETRY ACK/NAK: [2,5] */
# define RFAL_ISODEP_MAX_WTX_NACK_RETRYS \
( 3U ) /*!< Number of S(WTX) replied with NACK Digital 2.0 B9 - nRETRY WTX[2,5] */
# define RFAL_ISODEP_MAX_WTX_RETRYS \
( 20U ) /*!< Number of overall S(WTX) retries Digital 2.0 16.2.5.2 */
# define RFAL_ISODEP_MAX_WTX_RETRYS_ULTD \
( 255U ) /*!< Use unlimited number of overall S(WTX) */
# define RFAL_ISODEP_MAX_DSL_RETRYS \
( 0U ) /*!< Number of retries for a S(DESELECT) Digital 2.0 B9 - nRETRY DESELECT: [0,5] */
# define RFAL_ISODEP_RATS_RETRIES \
( 1U ) /*!< RATS retries upon fail Digital 2.0 B7 - nRETRY RATS [0,1] */
2020-10-19 01:09:48 +03:00
/*! Frame Size for Proximity Card Integer definitions */
2022-01-05 19:10:18 +03:00
typedef enum {
RFAL_ISODEP_FSXI_16 =
0 , /*!< Frame Size for Proximity Card Integer with 16 bytes */
RFAL_ISODEP_FSXI_24 =
1 , /*!< Frame Size for Proximity Card Integer with 24 bytes */
RFAL_ISODEP_FSXI_32 =
2 , /*!< Frame Size for Proximity Card Integer with 32 bytes */
RFAL_ISODEP_FSXI_40 =
3 , /*!< Frame Size for Proximity Card Integer with 40 bytes */
RFAL_ISODEP_FSXI_48 =
4 , /*!< Frame Size for Proximity Card Integer with 48 bytes */
RFAL_ISODEP_FSXI_64 =
5 , /*!< Frame Size for Proximity Card Integer with 64 bytes */
RFAL_ISODEP_FSXI_96 =
6 , /*!< Frame Size for Proximity Card Integer with 96 bytes */
RFAL_ISODEP_FSXI_128 =
7 , /*!< Frame Size for Proximity Card Integer with 128 bytes */
RFAL_ISODEP_FSXI_256 =
8 , /*!< Frame Size for Proximity Card Integer with 256 bytes */
RFAL_ISODEP_FSXI_512 =
9 , /*!< Frame Size for Proximity Card Integer with 512 bytes ISO14443-3 Amd2 2012 */
RFAL_ISODEP_FSXI_1024 =
10 , /*!< Frame Size for Proximity Card Integer with 1024 bytes ISO14443-3 Amd2 2012 */
RFAL_ISODEP_FSXI_2048 =
11 , /*!< Frame Size for Proximity Card Integer with 2048 bytes ISO14443-3 Amd2 2012 */
RFAL_ISODEP_FSXI_4096 =
12 /*!< Frame Size for Proximity Card Integer with 4096 bytes ISO14443-3 Amd2 2012 */
2020-10-19 01:09:48 +03:00
} rfalIsoDepFSxI ;
/*! Frame Size for Proximity Card definitions */
2022-01-05 19:10:18 +03:00
typedef enum {
RFAL_ISODEP_FSX_16 =
16 , /*!< Frame Size for Proximity Card with 16 bytes */
RFAL_ISODEP_FSX_24 =
24 , /*!< Frame Size for Proximity Card with 24 bytes */
RFAL_ISODEP_FSX_32 =
32 , /*!< Frame Size for Proximity Card with 32 bytes */
RFAL_ISODEP_FSX_40 =
40 , /*!< Frame Size for Proximity Card with 40 bytes */
RFAL_ISODEP_FSX_48 =
48 , /*!< Frame Size for Proximity Card with 48 bytes */
RFAL_ISODEP_FSX_64 =
64 , /*!< Frame Size for Proximity Card with 64 bytes */
RFAL_ISODEP_FSX_96 =
96 , /*!< Frame Size for Proximity Card with 96 bytes */
RFAL_ISODEP_FSX_128 =
128 , /*!< Frame Size for Proximity Card with 128 bytes */
RFAL_ISODEP_FSX_256 =
256 , /*!< Frame Size for Proximity Card with 256 bytes */
RFAL_ISODEP_FSX_512 =
512 , /*!< Frame Size for Proximity Card with 512 bytes ISO14443-3 Amd2 2012 */
RFAL_ISODEP_FSX_1024 =
1024 , /*!< Frame Size for Proximity Card with 1024 bytes ISO14443-3 Amd2 2012 */
RFAL_ISODEP_FSX_2048 =
2048 , /*!< Frame Size for Proximity Card with 2048 bytes ISO14443-3 Amd2 2012 */
RFAL_ISODEP_FSX_4096 =
4096 , /*!< Frame Size for Proximity Card with 4096 bytes ISO14443-3 Amd2 2012 */
2020-10-19 01:09:48 +03:00
} rfalIsoDepFSx ;
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* GLOBAL MACROS
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* GLOBAL DATA TYPES
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/*! RATS format Digital 1.1 13.6.1 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t CMD ; /*!< RATS command byte: 0xE0 */
uint8_t PARAM ; /*!< Param indicating FSDI and DID */
2020-10-19 01:09:48 +03:00
} rfalIsoDepRats ;
/*! ATS response format Digital 1.1 13.6.2 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t TL ; /*!< Length Byte, including TL byte itself */
uint8_t T0 ; /*!< Format Byte T0 indicating if TA, TB, TC */
uint8_t TA ; /*!< Interface Byte TA(1) */
uint8_t TB ; /*!< Interface Byte TB(1) */
uint8_t TC ; /*!< Interface Byte TC(1) */
uint8_t HB [ RFAL_ISODEP_ATS_HB_MAX_LEN ] ; /*!< Historical Bytes */
2020-10-19 01:09:48 +03:00
} rfalIsoDepAts ;
/*! PPS Request format (Protocol and Parameter Selection) ISO14443-4 5.3 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t PPSS ; /*!< Start Byte: [ 1101b | CID[4b] ] */
uint8_t PPS0 ; /*!< Parameter 0:[ 000b | PPS1[1n] | 0001b ] */
uint8_t PPS1 ; /*!< Parameter 1:[ 0000b | DSI[2b] | DRI[2b] ]*/
2020-10-19 01:09:48 +03:00
} rfalIsoDepPpsReq ;
/*! PPS Response format (Protocol and Parameter Selection) ISO14443-4 5.4 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t PPSS ; /*!< Start Byte: [ 1101b | CID[4b] ] */
2020-10-19 01:09:48 +03:00
} rfalIsoDepPpsRes ;
/*! ATTRIB Command Format Digital 1.1 15.6.1 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t cmd ; /*!< ATTRIB_REQ command byte */
uint8_t nfcid0 [ RFAL_NFCB_NFCID0_LEN ] ; /*!< NFCID0 of the card to be selected */
struct {
uint8_t PARAM1 ; /*!< PARAM1 of ATTRIB command */
uint8_t PARAM2 ; /*!< PARAM2 of ATTRIB command */
uint8_t PARAM3 ; /*!< PARAM3 of ATTRIB command */
uint8_t PARAM4 ; /*!< PARAM4 of ATTRIB command */
} Param ; /*!< Parameter of ATTRIB command */
uint8_t HLInfo [ RFAL_ISODEP_ATTRIB_HLINFO_LEN ] ; /*!< Higher Layer Information */
2020-10-19 01:09:48 +03:00
} rfalIsoDepAttribCmd ;
/*! ATTRIB Response Format Digital 1.1 15.6.2 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t mbliDid ; /*!< Contains MBLI and DID */
uint8_t HLInfo [ RFAL_ISODEP_ATTRIB_HLINFO_LEN ] ; /*!< Higher Layer Information */
2020-10-19 01:09:48 +03:00
} rfalIsoDepAttribRes ;
/*! S(Parameters) Command Format ISO14443-4 (2016) Table 4 */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t tag ; /*!< S(PARAMETERS) Tag field */
uint8_t length ; /*!< S(PARAMETERS) Length field */
uint8_t value [ RFAL_ISODEP_SPARAM_VALUES_MAX_LEN ] ; /*!< S(PARAMETERS) Value field */
2020-10-19 01:09:48 +03:00
} rfalIsoDepSParameter ;
/*! Activation info as Poller and Listener for NFC-A and NFC-B */
2022-01-05 19:10:18 +03:00
typedef union { /* PRQA S 0750 # MISRA 19.2 - Both members of the union will not be used concurrently, device is only of type A or B at a time. Thus no problem can occur. */
2020-10-19 01:09:48 +03:00
/*! NFC-A information */
2022-01-05 19:10:18 +03:00
union { /* PRQA S 0750 # MISRA 19.2 - Both members of the union will not be used concurrently, device is only PCD or PICC at a time. Thus no problem can occur. */
2020-10-19 01:09:48 +03:00
struct {
2022-01-05 19:10:18 +03:00
rfalIsoDepAts ATS ; /*!< ATS response (Poller mode) */
uint8_t ATSLen ; /*!< ATS response length (Poller mode) */
} Listener ;
2020-10-19 01:09:48 +03:00
struct {
2022-01-05 19:10:18 +03:00
rfalIsoDepRats RATS ; /*!< RATS request (Listener mode) */
} Poller ;
} A ;
2020-10-19 01:09:48 +03:00
2022-01-05 19:10:18 +03:00
/*! NFC-B information */
union { /* PRQA S 0750 # MISRA 19.2 - Both members of the union will not be used concurrently, device is only PCD or PICC at a time. Thus no problem can occur. */
struct {
rfalIsoDepAttribRes ATTRIB_RES ; /*!< ATTRIB_RES (Poller mode) */
uint8_t ATTRIB_RESLen ; /*!< ATTRIB_RES length (Poller mode) */
} Listener ;
struct {
rfalIsoDepAttribCmd ATTRIB ; /*!< ATTRIB request (Listener mode) */
uint8_t ATTRIBLen ; /*!< ATTRIB request length (Listener mode) */
} Poller ;
} B ;
} rfalIsoDepActivation ;
2020-10-19 01:09:48 +03:00
/*! ISO-DEP device Info */
typedef struct {
2022-01-05 19:10:18 +03:00
uint8_t FWI ; /*!< Frame Waiting Integer */
uint32_t FWT ; /*!< Frame Waiting Time (1/fc) */
uint32_t dFWT ; /*!< Delta Frame Waiting Time (1/fc) */
uint32_t SFGI ; /*!< Start-up Frame Guard time Integer */
uint32_t SFGT ; /*!< Start-up Frame Guard Time (ms) */
uint8_t FSxI ; /*!< Frame Size Device/Card Integer (FSDI or FSCI) */
uint16_t FSx ; /*!< Frame Size Device/Card (FSD or FSC) */
uint32_t MBL ; /*!< Maximum Buffer Length (optional for NFC-B) */
rfalBitRate DSI ; /*!< Bit Rate coding from Listener (PICC) to Poller (PCD) */
rfalBitRate DRI ; /*!< Bit Rate coding from Poller (PCD) to Listener (PICC) */
uint8_t DID ; /*!< Device ID */
uint8_t NAD ; /*!< Node ADdress */
bool supDID ; /*!< DID supported flag */
bool supNAD ; /*!< NAD supported flag */
bool supAdFt ; /*!< Advanced Features supported flag */
2020-10-19 01:09:48 +03:00
} rfalIsoDepInfo ;
/*! ISO-DEP Device structure */
typedef struct {
2022-01-05 19:10:18 +03:00
rfalIsoDepActivation activation ; /*!< Activation Info */
rfalIsoDepInfo info ; /*!< ISO-DEP (ISO14443-4) device Info */
2020-10-19 01:09:48 +03:00
} rfalIsoDepDevice ;
/*! ATTRIB Response parameters */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t mbli ; /*!< MBLI */
uint8_t HLInfo [ RFAL_ISODEP_ATTRIB_HLINFO_LEN ] ; /*!< Hi Layer Information */
uint8_t HLInfoLen ; /*!< Hi Layer Information Length */
2020-10-19 01:09:48 +03:00
} rfalIsoDepAttribResParam ;
/*! ATS Response parameter */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t fsci ; /*!< Frame Size of Proximity Card Integer */
uint8_t fwi ; /*!< Frame Waiting Time Integer */
uint8_t sfgi ; /*!< Start-Up Frame Guard Time Integer */
bool didSupport ; /*!< DID Supported */
uint8_t ta ; /*!< Max supported bitrate both direction */
uint8_t * hb ; /*!< Historical Bytes data */
uint8_t hbLen ; /*!< Historical Bytes Length */
2020-10-19 01:09:48 +03:00
} rfalIsoDepAtsParam ;
/*! Structure of I-Block Buffer format from caller */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t prologue [ RFAL_ISODEP_PROLOGUE_SIZE ] ; /*!< Prologue/SoD buffer */
uint8_t
inf [ RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN ] ; /*!< INF/Payload buffer */
2020-10-19 01:09:48 +03:00
} rfalIsoDepBufFormat ;
/*! Structure of APDU Buffer format from caller */
2022-01-05 19:10:18 +03:00
typedef struct {
uint8_t prologue [ RFAL_ISODEP_PROLOGUE_SIZE ] ; /*!< Prologue/SoD buffer */
uint8_t apdu [ RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN ] ; /*!< APDU/Payload buffer */
2020-10-19 01:09:48 +03:00
} rfalIsoDepApduBufFormat ;
/*! Listen Activation Parameters Structure */
2022-01-05 19:10:18 +03:00
typedef struct {
rfalIsoDepBufFormat * rxBuf ; /*!< Receive Buffer struct reference */
uint16_t * rxLen ; /*!< Received INF data length in Bytes */
bool * isRxChaining ; /*!< Received data is not complete */
rfalIsoDepDevice * isoDepDev ; /*!< ISO-DEP device info */
2020-10-19 01:09:48 +03:00
} rfalIsoDepListenActvParam ;
/*! Structure of parameters used on ISO DEP Transceive */
2022-01-05 19:10:18 +03:00
typedef struct {
rfalIsoDepBufFormat * txBuf ; /*!< Transmit Buffer struct reference */
uint16_t txBufLen ; /*!< Transmit Buffer INF field length in Bytes*/
bool isTxChaining ; /*!< Transmit data is not complete */
rfalIsoDepBufFormat * rxBuf ; /*!< Receive Buffer struct reference in Bytes */
uint16_t * rxLen ; /*!< Received INF data length in Bytes */
bool * isRxChaining ; /*!< Received data is not complete */
uint32_t FWT ; /*!< FWT to be used (ignored in Listen Mode) */
uint32_t dFWT ; /*!< Delta FWT to be used */
uint16_t ourFSx ; /*!< Our device Frame Size (FSD or FSC) */
uint16_t FSx ; /*!< Other device Frame Size (FSD or FSC) */
uint8_t DID ; /*!< Device ID (RFAL_ISODEP_NO_DID if no DID) */
2020-10-19 01:09:48 +03:00
} rfalIsoDepTxRxParam ;
/*! Structure of parameters used on ISO DEP APDU Transceive */
2022-01-05 19:10:18 +03:00
typedef struct {
rfalIsoDepApduBufFormat * txBuf ; /*!< Transmit Buffer struct reference */
uint16_t txBufLen ; /*!< Transmit Buffer INF field length in Bytes*/
rfalIsoDepApduBufFormat * rxBuf ; /*!< Receive Buffer struct reference in Bytes */
uint16_t * rxLen ; /*!< Received INF data length in Bytes */
rfalIsoDepBufFormat * tmpBuf ; /*!< Temp buffer for Rx I-Blocks (internal) */
uint32_t FWT ; /*!< FWT to be used (ignored in Listen Mode) */
uint32_t dFWT ; /*!< Delta FWT to be used */
uint16_t FSx ; /*!< Other device Frame Size (FSD or FSC) */
uint16_t ourFSx ; /*!< Our device Frame Size (FSD or FSC) */
uint8_t DID ; /*!< Device ID (RFAL_ISODEP_NO_DID if no DID) */
2020-10-19 01:09:48 +03:00
} rfalIsoDepApduTxRxParam ;
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* GLOBAL FUNCTION PROTOTYPES
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Initialize the ISO - DEP protocol
*
* Initialize the ISO - DEP protocol layer with default config
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
void rfalIsoDepInitialize ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Initialize the ISO - DEP protocol
*
* Initialize the ISO - DEP protocol layer with additional parameters allowing
* to customise the protocol layer for specific behaviours
*
* \ param [ in ] compMode : Compliance mode to be performed
* \ param [ in ] maxRetriesR : Number of retries for a R - Block
* Digital 2.0 B9 - nRETRY ACK / NAK : [ 2 , 5 ]
* \ param [ in ] maxRetriesSnWTX : Number of retries for a S ( WTX ) ( only in case
* of NAKs ) Digital 2.0 B9 - nRETRY WTX [ 2 , 5 ]
* \ param [ in ] maxRetriesSWTX : Number of overall S ( WTX ) retries .
* Use RFAL_ISODEP_MAX_WTX_RETRYS_ULTD for disabling
* this limit check Digital 2.0 16.2 .5 .2
* \ param [ in ] maxRetriesSDSL : Number of retries for a S ( DESELECT )
* Digital 2.0 B9 - nRETRY DESELECT : [ 0 , 5 ]
* \ param [ in ] maxRetriesI : Number of retries for a I - Block
* Digital 2.0 16.2 .5 .4
* \ param [ in ] maxRetriesRATS : Number of retries for RATS
* Digital 2.0 B7 - nRETRY RATS [ 0 , 1 ]
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
void rfalIsoDepInitializeWithParams (
rfalComplianceMode compMode ,
uint8_t maxRetriesR ,
uint8_t maxRetriesSnWTX ,
uint8_t maxRetriesSWTX ,
uint8_t maxRetriesSDSL ,
uint8_t maxRetriesI ,
uint8_t maxRetriesRATS ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief FSxI to FSx
*
* Convert Frame Size for proximity coupling Device Integer ( FSxI ) to
* Frame Size for proximity coupling Device ( FSx )
*
* FSD - maximum frame size for NFC Forum Device in Poll Mode
* FSC - maximum frame size for NFC Forum Device in Listen Mode
*
* FSxI = FSDI or FSCI
* FSx = FSD or FSC
*
* The FSD / FSC value includes the header and CRC
*
* \ param [ in ] FSxI : Frame Size for proximity coupling Device Integer
*
* \ return fsx : Frame Size for proximity coupling Device ( FSD or FSC )
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
uint16_t rfalIsoDepFSxI2FSx ( uint8_t FSxI ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief FWI to FWT
*
* Convert Frame Waiting time Integer ( FWI ) to Frame Waiting Time ( FWT ) in
* 1 / fc units
*
* \ param [ in ] fwi : Frame Waiting time Integer
*
* \ return fwt : Frame Waiting Time in 1 / fc units
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
uint32_t rfalIsoDepFWI2FWT ( uint8_t fwi ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Check if the buffer data contains a valid RATS command
*
* Check if it is a well formed RATS command with 2 bytes
* This function does not check the validity of FSDI and DID
*
* \ param [ in ] buf : reference to buffer containing the data to be checked
* \ param [ in ] bufLen : length of data in the buffer in bytes
*
* \ return true if the data indicates a RATS command ; false otherwise
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
bool rfalIsoDepIsRats ( const uint8_t * buf , uint8_t bufLen ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Check if the buffer data contains a valid ATTRIB command
*
* Check if it is a well formed ATTRIB command , but does not check the
* validity of the information inside
*
* \ param [ in ] buf : reference to buffer containing the data to be checked
* \ param [ in ] bufLen : length of data in the buffer in bytes
*
* \ return true if the data indicates a ATTRIB command ; false otherwise
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
bool rfalIsoDepIsAttrib ( const uint8_t * buf , uint8_t bufLen ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Start Listen Activation Handling
*
* Start Listen Activation Handling and setup to receive first I - block which may
* contain complete or partial APDU after activation is completed
*
* Pass in RATS for T4AT , or ATTRIB for T4BT , to handle ATS or ATTRIB Response respectively
* The Activation Handling handles ATS and ATTRIB Response ; and additionally PPS Response
* if a PPS is received for T4AT .
* The method uses the current RFAL state machine to determine if it is expecting RATS or ATTRIB
*
* Activation is completed if PPS Response is sent or if first PDU is received in T4T - A
* Activation is completed if ATTRIB Response is sent in T4T - B
*
* \ ref rfalIsoDepListenGetActivationStatus provide status if activation is completed .
* \ ref rfalIsoDepStartTransceive shall be called right after activation is completed
*
* \ param [ in ] atsParam : reference to ATS parameters
* \ param [ in ] attribResParam : reference to ATTRIB_RES parameters
* \ param [ in ] buf : reference to buffer containing RATS or ATTRIB
* \ param [ in ] bufLen : length in bytes of the given bufffer
* \ param [ in ] actParam : reference to incoming reception information will be placed
*
*
* \ warning Once the Activation has been completed the method
* rfalIsoDepGetTransceiveStatus ( ) must be called .
* If activation has completed due to reception of a data block ( not PPS ) the
* buffer owned by the caller and passed on actParam must still contain this data .
* The first data will be processed ( I - Block or S - DSL ) by rfalIsoDepGetTransceiveStatus ( )
* inform the caller and then for the next transaction use rfalIsoDepStartTransceive ( )
*
* \ return ERR_NONE : RATS / ATTRIB is valid and activation has started
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_PROTO : Invalid request
* \ return ERR_NOTSUPP : Feature not supported
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepListenStartActivation (
rfalIsoDepAtsParam * atsParam ,
const rfalIsoDepAttribResParam * attribResParam ,
const uint8_t * buf ,
uint16_t bufLen ,
rfalIsoDepListenActvParam actParam ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Get the current Activation Status
*
* \ return ERR_NONE if Activation is already completed
* \ return ERR_BUSY if Activation is ongoing
* \ return ERR_LINK_LOSS if Remote Field is turned off
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepListenGetActivationStatus ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Get the ISO - DEP Communication Information
*
* Gets the maximum INF length in bytes based on current Frame Size
* for proximity coupling Device ( FSD or FSC ) excluding the header and CRC
*
* \ return maximum INF length in bytes
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
uint16_t rfalIsoDepGetMaxInfLen ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Start Transceive
*
* This method triggers a ISO - DEP Transceive containing a complete or
* partial APDU
* It transmits the given message and handles all protocol retransmitions ,
* error handling and control messages
*
* The txBuf contains a complete or partial APDU ( INF ) to be transmitted
* The Prologue field will be manipulated by the Transceive
*
* If the buffer contains a partial APDU and is not the last block ,
* then isTxChaining must be set to true
*
* \ param [ in ] param : reference parameters to be used for the Transceive
*
* \ return ERR_PARAM : Bad request
* \ return ERR_WRONG_STATE : The module is not in a proper state
* \ return ERR_NONE : The Transceive request has been started
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepStartTransceive ( rfalIsoDepTxRxParam param ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Get the Transceive status
*
* Returns the status of the ISO - DEP Transceive
*
* \ warning When the other device is performing chaining once a chained
* block is received the error ERR_AGAIN is sent . At this point
* caller must handle the received data immediately .
* When ERR_AGAIN is returned an ACK has already been sent to
* the other device and the next block might be incoming .
* If rfalWorker ( ) is called frequently it will place the next
* block on the given buffer
*
*
* \ return ERR_NONE : Transceive has been completed successfully
* \ return ERR_BUSY : Transceive is ongoing
* \ return ERR_PROTO : Protocol error occurred
* \ return ERR_TIMEOUT : Timeout error occurred
* \ return ERR_SLEEP_REQ : Deselect has been received and responded
* \ return ERR_NOMEM : The received INF does not fit into the
* receive buffer
* \ return ERR_LINK_LOSS : Communication is lost because Reader / Writer
* has turned off its field
* \ return ERR_AGAIN : received one chaining block , continue to call
* this method to retrieve the remaining blocks
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepGetTransceiveStatus ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Start APDU Transceive
*
* This method triggers a ISO - DEP Transceive containing a complete APDU
* It transmits the given message and handles all protocol retransmitions ,
* error handling and control messages
*
* The txBuf contains a complete APDU to be transmitted
* The Prologue field will be manipulated by the Transceive
*
* \ warning the txBuf will be modified during the transmission
* \ warning the maximum RF frame which can be received is limited by param . tmpBuf
*
* \ param [ in ] param : reference parameters to be used for the Transceive
*
* \ return ERR_PARAM : Bad request
* \ return ERR_WRONG_STATE : The module is not in a proper state
* \ return ERR_NONE : The Transceive request has been started
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepStartApduTransceive ( rfalIsoDepApduTxRxParam param ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Get the APDU Transceive status
*
* \ return ERR_NONE : if Transceive has been completed successfully
* \ return ERR_BUSY : if Transceive is ongoing
* \ return ERR_PROTO : if a protocol error occurred
* \ return ERR_TIMEOUT : if a timeout error occurred
* \ return ERR_SLEEP_REQ : if Deselect is received and responded
* \ return ERR_NOMEM : if the received INF does not fit into the
* receive buffer
* \ return ERR_LINK_LOSS : if communication is lost because Reader / Writer
* has turned off its field
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepGetApduTransceiveStatus ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Send RATS
*
* This sends a RATS to make a NFC - A Listen Device to enter
* ISO - DEP layer ( ISO14443 - 4 ) and checks if the received ATS is valid
*
* \ param [ in ] FSDI : Frame Size Device Integer to be used
* \ param [ in ] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
* \ param [ out ] ats : pointer to place the ATS Response
* \ param [ out ] atsLen : pointer to place the ATS length
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , ATS received
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepRATS ( rfalIsoDepFSxI FSDI , uint8_t DID , rfalIsoDepAts * ats , uint8_t * atsLen ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Send PPS
*
* This sends a PPS to make a NFC - A Listen Device change the communications
* bit rate from 106 kbps to one of the supported bit rates
* Additionally checks if the received PPS response is valid
*
* \ param [ in ] DID : Device ID
* \ param [ in ] DSI : DSI code the divisor from Listener ( PICC ) to Poller ( PCD )
* \ param [ in ] DRI : DRI code the divisor from Poller ( PCD ) to Listener ( PICC )
* \ param [ out ] ppsRes : pointer to place the PPS Response
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , PPS Response received
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPPS ( uint8_t DID , rfalBitRate DSI , rfalBitRate DRI , rfalIsoDepPpsRes * ppsRes ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Send ATTRIB
*
* This sends a ATTRIB to make a NFC - B Listen Device to enter
* ISO - DEP layer ( ISO14443 - 4 ) and checks if the received ATTRIB Response is valid
*
* \ param [ in ] nfcid0 : NFCID0 to be used for the ATTRIB
* \ param [ in ] PARAM1 : ATTRIB PARAM1 byte ( communication parameters )
* \ param [ in ] DSI : DSI code the divisor from Listener ( PICC ) to Poller ( PCD )
* \ param [ in ] DRI : DRI code the divisor from Poller ( PCD ) to Listener ( PICC )
* \ param [ in ] FSDI : PCD ' s Frame Size to be announced on the ATTRIB
* \ param [ in ] PARAM3 : ATTRIB PARAM1 byte ( protocol type )
* \ param [ in ] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
* \ param [ in ] HLInfo : pointer to Higher layer INF ( NULL if none )
* \ param [ in ] HLInfoLen : Length HLInfo
* \ param [ in ] fwt : Frame Waiting Time to be used ( from SENSB_RES )
* \ param [ out ] attribRes : pointer to place the ATTRIB Response
* \ param [ out ] attribResLen : pointer to place the ATTRIB Response length
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , ATTRIB Response received
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepATTRIB (
const uint8_t * nfcid0 ,
uint8_t PARAM1 ,
rfalBitRate DSI ,
rfalBitRate DRI ,
rfalIsoDepFSxI FSDI ,
uint8_t PARAM3 ,
uint8_t DID ,
const uint8_t * HLInfo ,
uint8_t HLInfoLen ,
uint32_t fwt ,
rfalIsoDepAttribRes * attribRes ,
uint8_t * attribResLen ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief Deselects PICC
*
* This function sends a deselect command to PICC and waits for it ` s
* responce in a blocking way
*
* \ return ERR_NONE : Deselect successfully sent and acknowledged by PICC
* \ return ERR_TIMEOUT : No response rcvd from PICC
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepDeselect ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Handle NFC - A Activation
*
* This performs a NFC - A Activation into ISO - DEP layer ( ISO14443 - 4 ) with the given
* parameters . It sends RATS and if the higher bit rates are supported by
* both devices it additionally sends PPS
* Once Activated all details of the device are provided on isoDepDev
*
* \ param [ in ] FSDI : Frame Size Device Integer to be used
* \ param [ in ] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
* \ param [ in ] maxBR : Max bit rate supported by the Poller
* \ param [ out ] isoDepDev : ISO - DEP information of the activated Listen device
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , activation successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollAHandleActivation (
rfalIsoDepFSxI FSDI ,
uint8_t DID ,
rfalBitRate maxBR ,
rfalIsoDepDevice * isoDepDev ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Handle NFC - B Activation
*
* This performs a NFC - B Activation into ISO - DEP layer ( ISO14443 - 4 ) with the given
* parameters . It sends ATTRIB and calculates supported higher bit rates of both
* devices and performs activation .
* Once Activated all details of the device are provided on isoDepDev
*
* \ param [ in ] FSDI : Frame Size Device Integer to be used
* \ param [ in ] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
* \ param [ in ] maxBR : Max bit rate supported by the Poller
* \ param [ in ] PARAM1 : ATTRIB PARAM1 byte ( communication parameters )
* \ param [ in ] nfcbDev : pointer to the NFC - B Device containing the SENSB_RES
* \ param [ in ] HLInfo : pointer to Higher layer INF ( NULL if none )
* \ param [ in ] HLInfoLen : Length HLInfo
* \ param [ out ] isoDepDev : ISO - DEP information of the activated Listen device
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , activation successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollBHandleActivation (
rfalIsoDepFSxI FSDI ,
uint8_t DID ,
rfalBitRate maxBR ,
uint8_t PARAM1 ,
const rfalNfcbListenDevice * nfcbDev ,
const uint8_t * HLInfo ,
uint8_t HLInfoLen ,
rfalIsoDepDevice * isoDepDev ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Handle S ( Parameters )
*
* This checks if PICC supports S ( PARAMETERS ) , retieves PICC ' s
* capabilities and sets the Bit Rate at the highest supported by both
* devices
*
* \ param [ out ] isoDepDev : ISO - DEP information of the activated Listen device
* \ param [ in ] maxTxBR : Maximum Tx bit rate supported by PCD
* \ param [ in ] maxRxBR : Maximum Rx bit rate supported by PCD
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , S ( PARAMETERS ) selection successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollHandleSParameters (
rfalIsoDepDevice * isoDepDev ,
rfalBitRate maxTxBR ,
rfalBitRate maxRxBR ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Start NFC - A Activation
*
* This starts a NFC - A Activation into ISO - DEP layer ( ISO14443 - 4 ) with the given
* parameters . It sends RATS and if the higher bit rates are supported by
* both devices it additionally sends PPS
* Once Activated all details of the device are provided on isoDepDev
*
*
* \ see rfalIsoDepPollAGetActivationStatus
*
* \ param [ in ] FSDI : Frame Size Device Integer to be used
* \ param [ in ] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
* \ param [ in ] maxBR : Max bit rate supported by the Poller
* \ param [ out ] isoDepDev : ISO - DEP information of the activated Listen device
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , start of asynchronous operation successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollAStartActivation (
rfalIsoDepFSxI FSDI ,
uint8_t DID ,
rfalBitRate maxBR ,
rfalIsoDepDevice * isoDepDev ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Get NFC - A Activation Status
*
* Returns the activation status started by rfalIsoDepPollAStartActivation
*
* \ see rfalIsoDepPollAStartActivation
*
* \ return ERR_BUSY : Operation is ongoing
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , activation successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollAGetActivationStatus ( void ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Start NFC - B Activation
*
* This starts a NFC - B Activation into ISO - DEP layer ( ISO14443 - 4 ) with the given
* parameters . It will send ATTRIB and calculate supported higher bit rates of both
* devices and perform activation .
* Once Activated all details of the device are provided on isoDepDev
*
* \ see rfalIsoDepPollBGetActivationStatus
*
* \ param [ in ] FSDI : Frame Size Device Integer to be used
* \ param [ in ] DID : Device ID to be used or RFAL_ISODEP_NO_DID for not use DID
* \ param [ in ] maxBR : Max bit rate supported by the Poller
* \ param [ in ] PARAM1 : ATTRIB PARAM1 byte ( communication parameters )
* \ param [ in ] nfcbDev : pointer to the NFC - B Device containing the SENSB_RES
* \ param [ in ] HLInfo : pointer to Higher layer INF ( NULL if none )
* \ param [ in ] HLInfoLen : Length HLInfo
* \ param [ out ] isoDepDev : ISO - DEP information of the activated Listen device
*
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , start of asynchronous operation successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollBStartActivation (
rfalIsoDepFSxI FSDI ,
uint8_t DID ,
rfalBitRate maxBR ,
uint8_t PARAM1 ,
const rfalNfcbListenDevice * nfcbDev ,
const uint8_t * HLInfo ,
uint8_t HLInfoLen ,
rfalIsoDepDevice * isoDepDev ) ;
2020-10-19 01:09:48 +03:00
/*!
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* \ brief ISO - DEP Poller Get NFC - B Activation Status
*
* Returns the activation status started by rfalIsoDepPollBStartActivation
*
* \ see rfalIsoDepPollBStartActivation
*
* \ return ERR_BUSY : Operation is ongoing
* \ return ERR_WRONG_STATE : RFAL not initialized or incorrect mode
* \ return ERR_PARAM : Invalid parameters
* \ return ERR_IO : Generic internal error
* \ return ERR_TIMEOUT : Timeout error
* \ return ERR_PAR : Parity error detected
* \ return ERR_CRC : CRC error detected
* \ return ERR_FRAMING : Framing error detected
* \ return ERR_PROTO : Protocol error detected
* \ return ERR_NONE : No error , activation successful
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
2022-01-05 19:10:18 +03:00
ReturnCode rfalIsoDepPollBGetActivationStatus ( void ) ;
2020-10-19 01:09:48 +03:00
# endif /* RFAL_ISODEP_H_ */
/**
* @ }
*
* @ }
*
* @ }
*/
