unleashed-firmware/CHANGELOG.md

### New changes
* If you have copied apps into `apps` folder - remove `apps` folder on your microSD before installing this release to avoid issues!
* Dev Builds: Add extra pack dev branch to avoid "bug" reports with `API mismatch`
* SubGHz: Add manually -> GSN protocol support
* SubGHz: Add 318 and 418 MHz back to hopping list
* SubGHz: Fix hopper stuck at 433.42 due to wide range signals - 
When we using 433.92 remote flipper in hopping mode will stuck at 433.42 and may loose signal because of that, need to avoid using close freqs in hopping, only freqs with bigger difference like 310 -> 315
* Plugins: Update **TOTP (Authenticator)** [(by akopachov)](https://github.com/akopachov/flipper-zero_authenticator) -> BadBT Support
* OFW: BadUSB: implement boot protocol
* OFW: Remove hmac_sha256 from public API -> **Breaking API change, api was changed from 18.x to 19.x** 
**(this will make your manually copied plugins not work, update them in same way you installed them, or delete `apps` folder and then install firmware, if you using extra pack builds (with `e` in version) all apps in _Extra will be updated automatically)**

#### [🎲 Download latest extra apps pack](https://github.com/xMasterX/unleashed-extra-pack/archive/refs/heads/main.zip)

[-> How to install firmware](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/HowToInstall.md)

[-> Download qFlipper (official link)](https://flipperzero.one/update)

## Please support development of the project
* **Boosty** (patreon alternative): https://boosty.to/mmxdev
* Ko-Fi: https://ko-fi.com/masterx
* cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
* YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
* USDT(TRC20): `TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs`
* BCH: `qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3`
* ETH/BSC/ERC20-Tokens: `darkflippers.eth` (or `0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a`)
* BTC: `bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9`
* DOGE: `D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv`
* LTC: `ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9`
* XMR (Monero): `41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn`
* TON: `EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf`

### Thanks to our sponsors:
callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

**Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed**

**Recommended option - Web Updater**

What means `n` or `e` in - `flipper-z-f7-update-(version)(n / e).tgz` ? - `n` means this build comes without our custom animations, only official flipper animations, 
`e` means build has extra apps pack preinstalled

Self-update package (update from microSD) - `flipper-z-f7-update-(version).zip` or download `.tgz` for mobile app / qFlipper
update changelog 2022-07-18 10:10:26 +03:00			`### New changes`
Update changelog 2023-03-21 19:08:58 +03:00			* If you have copied apps into `apps` folder - remove `apps` folder on your microSD before installing this release to avoid issues!
			* Dev Builds: Add extra pack dev branch to avoid "bug" reports with `API mismatch`
GSN - Add manually support 2023-03-21 20:09:18 +03:00			`* SubGHz: Add manually -> GSN protocol support`
Add 418mhz to hopping list 2023-03-21 23:38:37 +03:00			`* SubGHz: Add 318 and 418 MHz back to hopping list`
Update changelog 2023-03-21 19:08:58 +03:00			`* SubGHz: Fix hopper stuck at 433.42 due to wide range signals -`
			`When we using 433.92 remote flipper in hopping mode will stuck at 433.42 and may loose signal because of that, need to avoid using close freqs in hopping, only freqs with bigger difference like 310 -> 315`
			`* Plugins: Update TOTP (Authenticator) [(by akopachov)](https://github.com/akopachov/flipper-zero_authenticator) -> BadBT Support`
			`* OFW: BadUSB: implement boot protocol`
			`* OFW: Remove hmac_sha256 from public API -> Breaking API change, api was changed from 18.x to 19.x`
			(this will make your manually copied plugins not work, update them in same way you installed them, or delete `apps` folder and then install firmware, if you using extra pack builds (with `e` in version) all apps in _Extra will be updated automatically)
update changelog and readme 2022-10-29 02:19:29 +03:00
Update changelog and readme 2023-03-01 02:57:06 +03:00			`#### [🎲 Download latest extra apps pack](https://github.com/xMasterX/unleashed-extra-pack/archive/refs/heads/main.zip)`
return some plugins back 2022-09-05 22:10:31 +03:00
rebranding :) 2022-10-09 02:27:38 +03:00			`[-> How to install firmware](https://github.com/DarkFlippers/unleashed-firmware/blob/dev/documentation/HowToInstall.md)`
update changelog 2022-09-18 05:18:17 +03:00
Update changelog and docs 2022-12-10 03:20:38 +03:00			`[-> Download qFlipper (official link)](https://flipperzero.one/update)`
update changelog 2022-07-20 21:50:26 +03:00
update changelog 2022-10-06 19:18:09 +03:00			`## Please support development of the project`
Testing links 2023-03-18 06:05:22 +03:00			`* Boosty (patreon alternative): https://boosty.to/mmxdev`
Update readme 2022-12-16 00:48:15 +03:00			`* Ko-Fi: https://ko-fi.com/masterx`
Update readme / changelog 2022-12-02 03:10:08 +03:00			`* cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65`
Update changelog and docs 2022-12-10 03:20:38 +03:00			`* YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209`
update readme and changelog 2022-10-30 02:02:42 +03:00			* USDT(TRC20): `TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs`
			* BCH: `qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3`
Update readme / changelog 2022-12-02 03:10:08 +03:00			* ETH/BSC/ERC20-Tokens: `darkflippers.eth` (or `0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a`)
update changelog 2022-10-06 19:18:09 +03:00			* BTC: `bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9`
			* DOGE: `D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv`
			* LTC: `ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9`
Update readme / changelog 2022-12-02 03:10:08 +03:00			* XMR (Monero): `41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn`
Update changelog and docs 2022-12-10 03:20:38 +03:00			* TON: `EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf`
update changelog 2022-10-06 19:18:09 +03:00
Update changelog 2022-12-19 00:52:37 +03:00			`### Thanks to our sponsors:`
			`callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...`
			`and all other great people who supported our project and me (xMasterX), thanks to you all!`

update docs & changelog 2022-09-20 04:09:14 +03:00			`Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed`
update changelog 2022-07-20 21:50:26 +03:00
Update changelog and docs 2022-12-10 03:20:38 +03:00			`Recommended option - Web Updater`

Update changelog 2022-12-30 19:58:28 +03:00			What means `n` or `e` in - `flipper-z-f7-update-(version)(n / e).tgz` ? - `n` means this build comes without our custom animations, only official flipper animations,
			`e` means build has extra apps pack preinstalled
Update changelog 2022-12-11 01:08:00 +03:00
Update changelog and docs 2022-12-10 03:20:38 +03:00			Self-update package (update from microSD) - `flipper-z-f7-update-(version).zip` or download `.tgz` for mobile app / qFlipper
update docs & changelog 2022-09-20 04:09:14 +03:00
update unirf / other fixes 2022-08-01 23:20:04 +03:00