unleashed-firmware/firmware/targets/f7/ble_glue/gap.c

578 lines
20 KiB
C
Raw Normal View History

#include "gap.h"
#include "ble.h"
#include <furi_hal.h>
#include <furi.h>
#define TAG "BtGap"
#define FAST_ADV_TIMEOUT 30000
#define INITIAL_ADV_TIMEOUT 60000
typedef struct {
uint16_t gap_svc_handle;
uint16_t dev_name_char_handle;
uint16_t appearance_char_handle;
uint16_t connection_handle;
uint8_t adv_svc_uuid_len;
uint8_t adv_svc_uuid[20];
char* adv_name;
} GapSvc;
typedef struct {
GapSvc service;
GapConfig* config;
GapState state;
osMutexId_t state_mutex;
GapEventCallback on_event_cb;
void* context;
osTimerId_t advertise_timer;
FuriThread* thread;
osMessageQueueId_t command_queue;
bool enable_adv;
} Gap;
typedef enum {
GapCommandAdvFast,
GapCommandAdvLowPower,
GapCommandAdvStop,
GapCommandKillThread,
} GapCommand;
typedef struct {
GapScanCallback callback;
void* context;
} GapScan;
// Identity root key
static const uint8_t gap_irk[16] =
{0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0, 0x12, 0x34, 0x56, 0x78, 0x9a, 0xbc, 0xde, 0xf0};
// Encryption root key
static const uint8_t gap_erk[16] =
{0xfe, 0xdc, 0xba, 0x09, 0x87, 0x65, 0x43, 0x21, 0xfe, 0xdc, 0xba, 0x09, 0x87, 0x65, 0x43, 0x21};
static Gap* gap = NULL;
static GapScan* gap_scan = NULL;
static void gap_advertise_start(GapState new_state);
static int32_t gap_app(void* context);
SVCCTL_UserEvtFlowStatus_t SVCCTL_App_Notification(void* pckt) {
hci_event_pckt* event_pckt;
evt_le_meta_event* meta_evt;
evt_blue_aci* blue_evt;
hci_le_phy_update_complete_event_rp0* evt_le_phy_update_complete;
uint8_t tx_phy;
uint8_t rx_phy;
tBleStatus ret = BLE_STATUS_INVALID_PARAMS;
event_pckt = (hci_event_pckt*)((hci_uart_pckt*)pckt)->data;
if(gap) {
osMutexAcquire(gap->state_mutex, osWaitForever);
}
switch(event_pckt->evt) {
case EVT_DISCONN_COMPLETE: {
hci_disconnection_complete_event_rp0* disconnection_complete_event =
(hci_disconnection_complete_event_rp0*)event_pckt->data;
if(disconnection_complete_event->Connection_Handle == gap->service.connection_handle) {
gap->service.connection_handle = 0;
gap->state = GapStateIdle;
FURI_LOG_I(
TAG, "Disconnect from client. Reason: %02X", disconnection_complete_event->Reason);
}
if(gap->enable_adv) {
// Restart advertising
gap_advertise_start(GapStateAdvFast);
furi_hal_power_insomnia_exit();
}
GapEvent event = {.type = GapEventTypeDisconnected};
gap->on_event_cb(event, gap->context);
} break;
case EVT_LE_META_EVENT:
meta_evt = (evt_le_meta_event*)event_pckt->data;
switch(meta_evt->subevent) {
case EVT_LE_CONN_UPDATE_COMPLETE: {
hci_le_connection_update_complete_event_rp0* event =
(hci_le_connection_update_complete_event_rp0*)meta_evt->data;
FURI_LOG_I(
TAG,
"Connection interval: %d, latency: %d, supervision timeout: %d",
event->Conn_Interval,
event->Conn_Latency,
event->Supervision_Timeout);
break;
}
case EVT_LE_PHY_UPDATE_COMPLETE:
evt_le_phy_update_complete = (hci_le_phy_update_complete_event_rp0*)meta_evt->data;
if(evt_le_phy_update_complete->Status) {
FURI_LOG_E(
TAG, "Update PHY failed, status %d", evt_le_phy_update_complete->Status);
} else {
FURI_LOG_I(TAG, "Update PHY succeed");
}
ret = hci_le_read_phy(gap->service.connection_handle, &tx_phy, &rx_phy);
if(ret) {
FURI_LOG_E(TAG, "Read PHY failed, status: %d", ret);
} else {
FURI_LOG_I(TAG, "PHY Params TX = %d, RX = %d ", tx_phy, rx_phy);
}
break;
case EVT_LE_CONN_COMPLETE:
furi_hal_power_insomnia_enter();
hci_le_connection_complete_event_rp0* connection_complete_event =
(hci_le_connection_complete_event_rp0*)meta_evt->data;
FURI_LOG_I(
TAG,
"Connection complete for connection handle 0x%x",
connection_complete_event->Connection_Handle);
// Stop advertising as connection completed
osTimerStop(gap->advertise_timer);
// Update connection status and handle
gap->state = GapStateConnected;
gap->service.connection_handle = connection_complete_event->Connection_Handle;
GapConnectionParams* params = &gap->config->conn_param;
if(aci_l2cap_connection_parameter_update_req(
gap->service.connection_handle,
params->conn_int_min,
params->conn_int_max,
params->slave_latency,
params->supervisor_timeout)) {
FURI_LOG_W(TAG, "Failed to request connection parameters update");
}
// Start pairing by sending security request
aci_gap_slave_security_req(connection_complete_event->Connection_Handle);
break;
case EVT_LE_ADVERTISING_REPORT: {
if(gap_scan) {
GapAddress address;
hci_le_advertising_report_event_rp0* evt =
(hci_le_advertising_report_event_rp0*)meta_evt->data;
for(uint8_t i = 0; i < evt->Num_Reports; i++) {
Advertising_Report_t* rep = &evt->Advertising_Report[i];
address.type = rep->Address_Type;
// Original MAC addres is in inverted order
for(uint8_t j = 0; j < sizeof(address.mac); j++) {
address.mac[j] = rep->Address[sizeof(address.mac) - j - 1];
}
gap_scan->callback(address, gap_scan->context);
}
}
} break;
default:
break;
}
break;
case EVT_VENDOR:
blue_evt = (evt_blue_aci*)event_pckt->data;
switch(blue_evt->ecode) {
aci_gap_pairing_complete_event_rp0* pairing_complete;
case EVT_BLUE_GAP_LIMITED_DISCOVERABLE:
FURI_LOG_I(TAG, "Limited discoverable event");
break;
case EVT_BLUE_GAP_PASS_KEY_REQUEST: {
// Generate random PIN code
uint32_t pin = rand() % 999999;
aci_gap_pass_key_resp(gap->service.connection_handle, pin);
FURI_LOG_I(TAG, "Pass key request event. Pin: %06d", pin);
GapEvent event = {.type = GapEventTypePinCodeShow, .data.pin_code = pin};
gap->on_event_cb(event, gap->context);
} break;
case EVT_BLUE_ATT_EXCHANGE_MTU_RESP: {
aci_att_exchange_mtu_resp_event_rp0* pr = (void*)blue_evt->data;
FURI_LOG_I(TAG, "Rx MTU size: %d", pr->Server_RX_MTU);
// Set maximum packet size given header size is 3 bytes
GapEvent event = {
.type = GapEventTypeUpdateMTU, .data.max_packet_size = pr->Server_RX_MTU - 3};
gap->on_event_cb(event, gap->context);
} break;
case EVT_BLUE_GAP_AUTHORIZATION_REQUEST:
FURI_LOG_D(TAG, "Authorization request event");
break;
case EVT_BLUE_GAP_SLAVE_SECURITY_INITIATED:
FURI_LOG_D(TAG, "Slave security initiated");
break;
case EVT_BLUE_GAP_BOND_LOST:
FURI_LOG_D(TAG, "Bond lost event. Start rebonding");
aci_gap_allow_rebond(gap->service.connection_handle);
break;
case EVT_BLUE_GAP_DEVICE_FOUND:
FURI_LOG_D(TAG, "Device found event");
break;
case EVT_BLUE_GAP_ADDR_NOT_RESOLVED:
FURI_LOG_D(TAG, "Address not resolved event");
break;
case EVT_BLUE_GAP_KEYPRESS_NOTIFICATION:
FURI_LOG_D(TAG, "Key press notification event");
break;
case EVT_BLUE_GAP_NUMERIC_COMPARISON_VALUE: {
uint32_t pin =
((aci_gap_numeric_comparison_value_event_rp0*)(blue_evt->data))->Numeric_Value;
FURI_LOG_I(TAG, "Verify numeric comparison: %06d", pin);
GapEvent event = {.type = GapEventTypePinCodeVerify, .data.pin_code = pin};
bool result = gap->on_event_cb(event, gap->context);
aci_gap_numeric_comparison_value_confirm_yesno(gap->service.connection_handle, result);
break;
}
case EVT_BLUE_GAP_PAIRING_CMPLT:
pairing_complete = (aci_gap_pairing_complete_event_rp0*)blue_evt->data;
if(pairing_complete->Status) {
FURI_LOG_E(
TAG,
"Pairing failed with status: %d. Terminating connection",
pairing_complete->Status);
aci_gap_terminate(gap->service.connection_handle, 5);
} else {
FURI_LOG_I(TAG, "Pairing complete");
GapEvent event = {.type = GapEventTypeConnected};
gap->on_event_cb(event, gap->context);
}
break;
case EVT_BLUE_GAP_PROCEDURE_COMPLETE:
FURI_LOG_D(TAG, "Procedure complete event");
break;
case EVT_BLUE_L2CAP_CONNECTION_UPDATE_RESP: {
uint16_t result =
((aci_l2cap_connection_update_resp_event_rp0*)(blue_evt->data))->Result;
if(result == 0) {
FURI_LOG_D(TAG, "Connection parameters accepted");
} else if(result == 1) {
FURI_LOG_D(TAG, "Connection parameters denied");
}
break;
}
}
default:
break;
}
if(gap) {
osMutexRelease(gap->state_mutex);
}
return SVCCTL_UserEvtFlowEnable;
}
static void set_advertisment_service_uid(uint8_t* uid, uint8_t uid_len) {
if(uid_len == 2) {
gap->service.adv_svc_uuid[0] = AD_TYPE_16_BIT_SERV_UUID;
} else if(uid_len == 4) {
gap->service.adv_svc_uuid[0] = AD_TYPE_32_BIT_SERV_UUID;
} else if(uid_len == 16) {
gap->service.adv_svc_uuid[0] = AD_TYPE_128_BIT_SERV_UUID_CMPLT_LIST;
}
memcpy(&gap->service.adv_svc_uuid[gap->service.adv_svc_uuid_len], uid, uid_len);
gap->service.adv_svc_uuid_len += uid_len;
}
static void gap_init_svc(Gap* gap) {
tBleStatus status;
uint32_t srd_bd_addr[2];
// HCI Reset to synchronise BLE Stack
hci_reset();
// Configure mac address
aci_hal_write_config_data(
CONFIG_DATA_PUBADDR_OFFSET, CONFIG_DATA_PUBADDR_LEN, gap->config->mac_address);
/* Static random Address
* The two upper bits shall be set to 1
* The lowest 32bits is read from the UDN to differentiate between devices
* The RNG may be used to provide a random number on each power on
*/
srd_bd_addr[1] = 0x0000ED6E;
srd_bd_addr[0] = LL_FLASH_GetUDN();
aci_hal_write_config_data(
CONFIG_DATA_RANDOM_ADDRESS_OFFSET, CONFIG_DATA_RANDOM_ADDRESS_LEN, (uint8_t*)srd_bd_addr);
// Set Identity root key used to derive LTK and CSRK
aci_hal_write_config_data(CONFIG_DATA_IR_OFFSET, CONFIG_DATA_IR_LEN, (uint8_t*)gap_irk);
// Set Encryption root key used to derive LTK and CSRK
aci_hal_write_config_data(CONFIG_DATA_ER_OFFSET, CONFIG_DATA_ER_LEN, (uint8_t*)gap_erk);
// Set TX Power to 0 dBm
aci_hal_set_tx_power_level(1, 0x19);
// Initialize GATT interface
aci_gatt_init();
// Initialize GAP interface
// Skip fist symbol AD_TYPE_COMPLETE_LOCAL_NAME
char* name = gap->service.adv_name + 1;
aci_gap_init(
GAP_PERIPHERAL_ROLE,
0,
strlen(name),
&gap->service.gap_svc_handle,
&gap->service.dev_name_char_handle,
&gap->service.appearance_char_handle);
// Set GAP characteristics
status = aci_gatt_update_char_value(
gap->service.gap_svc_handle,
gap->service.dev_name_char_handle,
0,
strlen(name),
(uint8_t*)name);
if(status) {
FURI_LOG_E(TAG, "Failed updating name characteristic: %d", status);
}
uint8_t gap_appearence_char_uuid[2] = {
gap->config->appearance_char & 0xff, gap->config->appearance_char >> 8};
status = aci_gatt_update_char_value(
gap->service.gap_svc_handle,
gap->service.appearance_char_handle,
0,
2,
gap_appearence_char_uuid);
if(status) {
FURI_LOG_E(TAG, "Failed updating appearence characteristic: %d", status);
}
// Set default PHY
hci_le_set_default_phy(ALL_PHYS_PREFERENCE, TX_2M_PREFERRED, RX_2M_PREFERRED);
// Set I/O capability
bool keypress_supported = false;
if(gap->config->pairing_method == GapPairingPinCodeShow) {
aci_gap_set_io_capability(IO_CAP_DISPLAY_ONLY);
} else if(gap->config->pairing_method == GapPairingPinCodeVerifyYesNo) {
aci_gap_set_io_capability(IO_CAP_DISPLAY_YES_NO);
keypress_supported = true;
}
// Setup authentication
aci_gap_set_authentication_requirement(
gap->config->bonding_mode,
CFG_MITM_PROTECTION,
CFG_SC_SUPPORT,
keypress_supported,
CFG_ENCRYPTION_KEY_SIZE_MIN,
CFG_ENCRYPTION_KEY_SIZE_MAX,
CFG_USED_FIXED_PIN,
0,
PUBLIC_ADDR);
// Configure whitelist
aci_gap_configure_whitelist();
}
static void gap_advertise_start(GapState new_state) {
tBleStatus status;
uint16_t min_interval;
uint16_t max_interval;
if(new_state == GapStateAdvFast) {
min_interval = 0x80; // 80 ms
max_interval = 0xa0; // 100 ms
} else {
min_interval = 0x0640; // 1 s
max_interval = 0x0fa0; // 2.5 s
}
// Stop advertising timer
osTimerStop(gap->advertise_timer);
if((new_state == GapStateAdvLowPower) &&
((gap->state == GapStateAdvFast) || (gap->state == GapStateAdvLowPower))) {
// Stop advertising
status = aci_gap_set_non_discoverable();
if(status) {
FURI_LOG_E(TAG, "Stop Advertising Failed, result: %d", status);
}
}
// Configure advertising
status = aci_gap_set_discoverable(
ADV_IND,
min_interval,
max_interval,
PUBLIC_ADDR,
0,
strlen(gap->service.adv_name),
(uint8_t*)gap->service.adv_name,
gap->service.adv_svc_uuid_len,
gap->service.adv_svc_uuid,
0,
0);
if(status) {
FURI_LOG_E(TAG, "Set discoverable err: %d", status);
}
gap->state = new_state;
GapEvent event = {.type = GapEventTypeStartAdvertising};
gap->on_event_cb(event, gap->context);
osTimerStart(gap->advertise_timer, INITIAL_ADV_TIMEOUT);
}
static void gap_advertise_stop() {
if(gap->state > GapStateIdle) {
if(gap->state == GapStateConnected) {
// Terminate connection
aci_gap_terminate(gap->service.connection_handle, 0x13);
}
// Stop advertising
osTimerStop(gap->advertise_timer);
aci_gap_set_non_discoverable();
gap->state = GapStateIdle;
}
GapEvent event = {.type = GapEventTypeStopAdvertising};
gap->on_event_cb(event, gap->context);
}
void gap_start_advertising() {
osMutexAcquire(gap->state_mutex, osWaitForever);
if(gap->state == GapStateIdle) {
gap->state = GapStateStartingAdv;
FURI_LOG_I(TAG, "Start advertising");
gap->enable_adv = true;
GapCommand command = GapCommandAdvFast;
furi_check(osMessageQueuePut(gap->command_queue, &command, 0, 0) == osOK);
}
osMutexRelease(gap->state_mutex);
}
void gap_stop_advertising() {
osMutexAcquire(gap->state_mutex, osWaitForever);
if(gap->state > GapStateIdle) {
FURI_LOG_I(TAG, "Stop advertising");
gap->enable_adv = false;
GapCommand command = GapCommandAdvStop;
furi_check(osMessageQueuePut(gap->command_queue, &command, 0, 0) == osOK);
}
osMutexRelease(gap->state_mutex);
}
static void gap_advetise_timer_callback(void* context) {
GapCommand command = GapCommandAdvLowPower;
furi_check(osMessageQueuePut(gap->command_queue, &command, 0, 0) == osOK);
}
bool gap_init(GapConfig* config, GapEventCallback on_event_cb, void* context) {
if(!ble_glue_is_radio_stack_ready()) {
return false;
}
[FL-2274] Inventing streams and moving FFF to them (#981) * Streams: string stream * String stream: updated insert/delete api * Streams: generic stream interface and string stream implementation * Streams: helpers for insert and delete_and_insert * FFF: now compatible with streams * MinUnit: introduced tests with arguments * FFF: stream access violation * Streams: copy data between streams * Streams: file stream * FFF: documentation * FFStream: documentation * FFF: alloc as file * MinUnit: support for nested tests * Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout. * FFF: simplified file open function * Streams: unit tests * FFF: tests * Streams: declare cache_size constant as define, to allow variable modified arrays * FFF: lib moved to a separate folder * iButton: new FFF * RFID: new FFF * Animations: new FFF * IR: new FFF * NFC: new FFF * Flipper file format: delete lib * U2F: new FFF * Subghz: new FFF and streams * Streams: read line * Streams: split * FuriCore: implement memset with extra asserts * FuriCore: implement extra heap asserts without inventing memset * Scene manager: protected access to the scene id stack with a size check * NFC worker: dirty fix for issue where hal_nfc was busy on app start * Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc. * FuriCore: cleanup memmgr code. * Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console. * Memmgr: added ability to track allocations and deallocations through console. * FFStream: some speedup * Streams, FF: minor fixes * Tests: restore * File stream: a slightly more thread-safe version of file_stream_delete_and_insert Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-18 22:53:46 +03:00
gap = malloc(sizeof(Gap));
gap->config = config;
srand(DWT->CYCCNT);
// Create advertising timer
gap->advertise_timer = osTimerNew(gap_advetise_timer_callback, osTimerOnce, NULL, NULL);
// Initialization of GATT & GAP layer
gap->service.adv_name = config->adv_name;
gap_init_svc(gap);
// Initialization of the BLE Services
SVCCTL_Init();
// Initialization of the GAP state
gap->state_mutex = osMutexNew(NULL);
gap->state = GapStateIdle;
gap->service.connection_handle = 0xFFFF;
gap->enable_adv = true;
// Thread configuration
gap->thread = furi_thread_alloc();
furi_thread_set_name(gap->thread, "BleGapDriver");
furi_thread_set_stack_size(gap->thread, 1024);
furi_thread_set_context(gap->thread, gap);
furi_thread_set_callback(gap->thread, gap_app);
furi_thread_start(gap->thread);
// Command queue allocation
gap->command_queue = osMessageQueueNew(8, sizeof(GapCommand), NULL);
uint8_t adv_service_uid[2];
gap->service.adv_svc_uuid_len = 1;
adv_service_uid[0] = gap->config->adv_service_uuid & 0xff;
adv_service_uid[1] = gap->config->adv_service_uuid >> 8;
set_advertisment_service_uid(adv_service_uid, sizeof(adv_service_uid));
// Set callback
gap->on_event_cb = on_event_cb;
gap->context = context;
return true;
}
GapState gap_get_state() {
GapState state;
if(gap) {
osMutexAcquire(gap->state_mutex, osWaitForever);
state = gap->state;
osMutexRelease(gap->state_mutex);
} else {
state = GapStateUninitialized;
}
return state;
}
void gap_start_scan(GapScanCallback callback, void* context) {
furi_assert(callback);
[FL-2274] Inventing streams and moving FFF to them (#981) * Streams: string stream * String stream: updated insert/delete api * Streams: generic stream interface and string stream implementation * Streams: helpers for insert and delete_and_insert * FFF: now compatible with streams * MinUnit: introduced tests with arguments * FFF: stream access violation * Streams: copy data between streams * Streams: file stream * FFF: documentation * FFStream: documentation * FFF: alloc as file * MinUnit: support for nested tests * Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout. * FFF: simplified file open function * Streams: unit tests * FFF: tests * Streams: declare cache_size constant as define, to allow variable modified arrays * FFF: lib moved to a separate folder * iButton: new FFF * RFID: new FFF * Animations: new FFF * IR: new FFF * NFC: new FFF * Flipper file format: delete lib * U2F: new FFF * Subghz: new FFF and streams * Streams: read line * Streams: split * FuriCore: implement memset with extra asserts * FuriCore: implement extra heap asserts without inventing memset * Scene manager: protected access to the scene id stack with a size check * NFC worker: dirty fix for issue where hal_nfc was busy on app start * Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc. * FuriCore: cleanup memmgr code. * Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console. * Memmgr: added ability to track allocations and deallocations through console. * FFStream: some speedup * Streams, FF: minor fixes * Tests: restore * File stream: a slightly more thread-safe version of file_stream_delete_and_insert Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-18 22:53:46 +03:00
gap_scan = malloc(sizeof(GapScan));
gap_scan->callback = callback;
gap_scan->context = context;
// Scan interval 250 ms
hci_le_set_scan_parameters(1, 4000, 200, 0, 0);
hci_le_set_scan_enable(1, 1);
}
void gap_stop_scan() {
furi_assert(gap_scan);
hci_le_set_scan_enable(0, 1);
free(gap_scan);
gap_scan = NULL;
}
void gap_thread_stop() {
if(gap) {
osMutexAcquire(gap->state_mutex, osWaitForever);
gap->enable_adv = false;
GapCommand command = GapCommandKillThread;
osMessageQueuePut(gap->command_queue, &command, 0, osWaitForever);
osMutexRelease(gap->state_mutex);
furi_thread_join(gap->thread);
furi_thread_free(gap->thread);
// Free resources
osMutexDelete(gap->state_mutex);
osMessageQueueDelete(gap->command_queue);
osTimerStop(gap->advertise_timer);
while(xTimerIsTimerActive(gap->advertise_timer) == pdTRUE) osDelay(1);
furi_check(osTimerDelete(gap->advertise_timer) == osOK);
free(gap);
gap = NULL;
}
}
static int32_t gap_app(void* context) {
GapCommand command;
while(1) {
osStatus_t status = osMessageQueueGet(gap->command_queue, &command, NULL, osWaitForever);
if(status != osOK) {
FURI_LOG_E(TAG, "Message queue get error: %d", status);
continue;
}
osMutexAcquire(gap->state_mutex, osWaitForever);
if(command == GapCommandKillThread) {
break;
}
if(command == GapCommandAdvFast) {
gap_advertise_start(GapStateAdvFast);
} else if(command == GapCommandAdvLowPower) {
gap_advertise_start(GapStateAdvLowPower);
} else if(command == GapCommandAdvStop) {
gap_advertise_stop();
}
osMutexRelease(gap->state_mutex);
}
return 0;
}