unleashed-firmware/firmware/targets/f7/furi_hal/furi_hal_spi.c

170 lines
4.5 KiB
C
Raw Normal View History

#include "furi_hal_spi.h"
#include "furi_hal_resources.h"
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00
#include <furi_hal_power.h>
#include <stdbool.h>
#include <string.h>
#include <furi.h>
#include <stm32wbxx_ll_spi.h>
#include <stm32wbxx_ll_utils.h>
#include <stm32wbxx_ll_cortex.h>
#define TAG "FuriHalSpi"
[FL-2263] Flasher service & RAM exec (#1006) * WIP on stripping fw * Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0 * Fixed uninitialized storage struct; small fixes to compact fw * Flasher srv w/mocked flash ops * Fixed typos & accomodated FFF changes * Alternative fw startup branch * Working load & jmp to RAM fw * +manifest processing for stage loader; + crc verification for stage payload * Fixed questionable code & potential leaks * Lowered screen update rate; added radio stack update stubs; working dfu write * Console EP with manifest & stage validation * Added microtar lib; minor ui fixes for updater * Removed microtar * Removed mtar #2 * Added a better version of microtar * TAR archive api; LFS backup & restore core * Recursive backup/restore * LFS worker thread * Added system apps to loader - not visible in UI; full update process with restarts * Typo fix * Dropped BL & f6; tooling for updater WIP * Minor py fixes * Minor fixes to make it build after merge * Ported flash workaround from BL + fixed visuals * Minor cleanup * Chmod + loader app search fix * Python linter fix * Removed usb stuff & float read support for staged loader == -10% of binary size * Added backup/restore & update pb requests * Added stub impl to RPC for backup/restore/update commands * Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines * Moved backup&restore to storage * Fixed new message types * Backup/restore/update RPC impl * Moved furi_hal_crc to LL; minor fixes * CRC HAL rework to LL * Purging STM HAL * Brought back minimal DFU boot mode (no gui); additional crc state checks * Added splash screen, BROKEN usb function * Clock init rework WIP * Stripped graphics from DFU mode * Temp fix for unused static fun * WIP update picker - broken! * Fixed UI * Bumping version * Fixed RTC setup * Backup to update folder instead of ext root * Removed unused scenes & more usb remnants from staged loader * CI updates * Fixed update bundle name * Temporary restored USB handler * Attempt to prevent .text corruption * Comments on how I spent this Saturday * Added update file icon * Documentation updates * Moved common code to lib folder * Storage: more unit tests * Storage: blocking dir open, differentiate file and dir when freed. * Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value * Removed re-init check for manifest * Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py * Increased update worker stack size * Text fixes in backup CLI * Displaying number of update stages to run; removed timeout in handling errors * Bumping version * Added thread cleanup for spawner thread * Updated build targets to exclude firmware bundle from 'ALL' * Fixed makefile for update_package; skipping VCP init for update mode (ugly) * Switched github build from ALL to update_package * Added +x for dist_update.sh * Cli: add total heap size to "free" command * Moved (RAM) suffix to build version instead of git commit no. * DFU comment * Some fixes suggested by clang-tidy * Fixed recursive PREFIX macro * Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays * Github: correct build target name in firmware build * FuriHal: move target switch to boot * Makefile: fix firmware flash * Furi, FuriHal: move kernel start to furi, early init * Drop bootloader related stuff * Drop cube. Drop bootloader linker script. * Renamed update_hl, moved constants to #defines * Moved update-related boot mode to separate bitfield * Reworked updater cli to single entry point; fixed crash on tar cleanup * Added Python replacement for dist shell scripts * Linter fixes for dist.py +x * Fixes for environment suffix * Dropped bash scripts * Added dirty build flag to version structure & interfaces * Version string escapes * Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program * Fixed fw address in ReadMe.md * Rpc: fix crash on double screen start * Return back original boot behavior and fix jump to system bootloader * Cleanup code, add error sequence for RTC * Update firmware readme * FuriHal: drop boot, restructure RTC registers usage and add header register check * Furi goes first * Toolchain: add ccache support * Renamed update bundle dir Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: あく <alleteam@gmail.com>
2022-04-13 23:50:25 +03:00
void furi_hal_spi_init_early() {
furi_hal_spi_bus_init(&furi_hal_spi_bus_d);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_display);
}
void furi_hal_spi_deinit_early() {
furi_hal_spi_bus_handle_deinit(&furi_hal_spi_bus_handle_display);
furi_hal_spi_bus_deinit(&furi_hal_spi_bus_d);
}
2021-08-08 21:03:25 +03:00
void furi_hal_spi_init() {
furi_hal_spi_bus_init(&furi_hal_spi_bus_r);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_nfc);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_sd_fast);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_sd_slow);
FURI_LOG_I(TAG, "Init OK");
}
void furi_hal_spi_bus_init(FuriHalSpiBus* bus) {
furi_assert(bus);
bus->callback(bus, FuriHalSpiBusEventInit);
}
void furi_hal_spi_bus_deinit(FuriHalSpiBus* bus) {
furi_assert(bus);
bus->callback(bus, FuriHalSpiBusEventDeinit);
}
void furi_hal_spi_bus_handle_init(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
handle->callback(handle, FuriHalSpiBusHandleEventInit);
}
void furi_hal_spi_bus_handle_deinit(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
handle->callback(handle, FuriHalSpiBusHandleEventDeinit);
}
void furi_hal_spi_acquire(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00
furi_hal_power_insomnia_enter();
handle->bus->callback(handle->bus, FuriHalSpiBusEventLock);
handle->bus->callback(handle->bus, FuriHalSpiBusEventActivate);
furi_assert(handle->bus->current_handle == NULL);
handle->bus->current_handle = handle;
handle->callback(handle, FuriHalSpiBusHandleEventActivate);
}
void furi_hal_spi_release(FuriHalSpiBusHandle* handle) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
// Handle event and unset handle
handle->callback(handle, FuriHalSpiBusHandleEventDeactivate);
handle->bus->current_handle = NULL;
// Bus events
handle->bus->callback(handle->bus, FuriHalSpiBusEventDeactivate);
handle->bus->callback(handle->bus, FuriHalSpiBusEventUnlock);
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00
furi_hal_power_insomnia_exit();
}
static void furi_hal_spi_bus_end_txrx(FuriHalSpiBusHandle* handle, uint32_t timeout) {
UNUSED(timeout); // FIXME
while(LL_SPI_GetTxFIFOLevel(handle->bus->spi) != LL_SPI_TX_FIFO_EMPTY)
;
while(LL_SPI_IsActiveFlag_BSY(handle->bus->spi))
;
while(LL_SPI_GetRxFIFOLevel(handle->bus->spi) != LL_SPI_RX_FIFO_EMPTY) {
LL_SPI_ReceiveData8(handle->bus->spi);
}
}
bool furi_hal_spi_bus_rx(
FuriHalSpiBusHandle* handle,
uint8_t* buffer,
size_t size,
uint32_t timeout) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
furi_assert(buffer);
furi_assert(size > 0);
return furi_hal_spi_bus_trx(handle, buffer, buffer, size, timeout);
}
bool furi_hal_spi_bus_tx(
FuriHalSpiBusHandle* handle,
uint8_t* buffer,
size_t size,
uint32_t timeout) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
furi_assert(buffer);
furi_assert(size > 0);
bool ret = true;
while(size > 0) {
if(LL_SPI_IsActiveFlag_TXE(handle->bus->spi)) {
LL_SPI_TransmitData8(handle->bus->spi, *buffer);
buffer++;
size--;
}
}
furi_hal_spi_bus_end_txrx(handle, timeout);
LL_SPI_ClearFlag_OVR(handle->bus->spi);
return ret;
}
bool furi_hal_spi_bus_trx(
FuriHalSpiBusHandle* handle,
uint8_t* tx_buffer,
uint8_t* rx_buffer,
size_t size,
uint32_t timeout) {
furi_assert(handle);
furi_assert(handle->bus->current_handle == handle);
furi_assert(tx_buffer);
furi_assert(rx_buffer);
furi_assert(size > 0);
bool ret = true;
size_t tx_size = size;
bool tx_allowed = true;
while(size > 0) {
if(tx_size > 0 && LL_SPI_IsActiveFlag_TXE(handle->bus->spi) && tx_allowed) {
LL_SPI_TransmitData8(handle->bus->spi, *tx_buffer);
tx_buffer++;
tx_size--;
tx_allowed = false;
}
if(LL_SPI_IsActiveFlag_RXNE(handle->bus->spi)) {
*rx_buffer = LL_SPI_ReceiveData8(handle->bus->spi);
rx_buffer++;
size--;
tx_allowed = true;
}
}
furi_hal_spi_bus_end_txrx(handle, timeout);
return ret;
}