Fix input (#166)

* fixed inline functions for modern C standart

* Fix button-left and button-back setup code

* *nix fix

Co-authored-by: aanper <mail@s3f.ru>

firmware/targets/f2/Inc/main.h

@@ -60,6 +60,7 @@ void Error_Handler(void);
 /* Private defines -----------------------------------------------------------*/
 #define BUTTON_BACK_Pin GPIO_PIN_13
 #define BUTTON_BACK_GPIO_Port GPIOC
+#define BUTTON_BACK_EXTI_IRQn EXTI15_10_IRQn
 #define CHRG_Pin GPIO_PIN_2
 #define CHRG_GPIO_Port GPIOC
 #define CHRG_EXTI_IRQn EXTI2_IRQn

firmware/targets/f2/Inc/stm32l4xx_it.h

@@ -59,6 +59,7 @@ void EXTI2_IRQHandler(void);
 void EXTI4_IRQHandler(void);
 void EXTI9_5_IRQHandler(void);
 void TIM1_TRG_COM_TIM17_IRQHandler(void);
+void EXTI15_10_IRQHandler(void);
 void TIM8_CC_IRQHandler(void);
 void OTG_FS_IRQHandler(void);
 /* USER CODE BEGIN EFP */

firmware/targets/f2/Src/gpio.c

@@ -66,7 +66,7 @@ void MX_GPIO_Init(void)
 
   /*Configure GPIO pin : PtPin */
   GPIO_InitStruct.Pin = BUTTON_BACK_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
   GPIO_InitStruct.Pull = GPIO_PULLDOWN;
   HAL_GPIO_Init(BUTTON_BACK_GPIO_Port, &GPIO_InitStruct);
 
@@ -108,8 +108,8 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  /*Configure GPIO pins : PBPin PBPin PBPin */
+  /*Configure GPIO pins : PBPin PBPin PBPin PBPin */
-  GPIO_InitStruct.Pin = BUTTON_UP_Pin|BUTTON_RIGHT_Pin|BUTTON_OK_Pin;
+  GPIO_InitStruct.Pin = BUTTON_UP_Pin|BUTTON_LEFT_Pin|BUTTON_RIGHT_Pin|BUTTON_OK_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
   GPIO_InitStruct.Pull = GPIO_PULLDOWN;
   HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
@@ -147,12 +147,6 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
 
-  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = BUTTON_LEFT_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
-  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  HAL_GPIO_Init(BUTTON_LEFT_GPIO_Port, &GPIO_InitStruct);
-
   /*Configure GPIO pin : PtPin */
   GPIO_InitStruct.Pin = CC1101_G0_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
@@ -175,6 +169,9 @@ void MX_GPIO_Init(void)
   HAL_NVIC_SetPriority(EXTI9_5_IRQn, 5, 0);
   HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
 
+  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 5, 0);
+  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
+
 }
 
 /* USER CODE BEGIN 2 */

firmware/targets/f2/Src/stm32l4xx_it.c

@@ -245,6 +245,20 @@ void TIM1_TRG_COM_TIM17_IRQHandler(void)
   /* USER CODE END TIM1_TRG_COM_TIM17_IRQn 1 */
 }
 
+/**
+  * @brief This function handles EXTI line[15:10] interrupts.
+  */
+void EXTI15_10_IRQHandler(void)
+{
+  /* USER CODE BEGIN EXTI15_10_IRQn 0 */
+
+  /* USER CODE END EXTI15_10_IRQn 0 */
+  HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_13);
+  /* USER CODE BEGIN EXTI15_10_IRQn 1 */
+
+  /* USER CODE END EXTI15_10_IRQn 1 */
+}
+
 /**
   * @brief This function handles TIM8 capture compare interrupt.
   */

firmware/targets/f2/cube.ioc

@@ -35,6 +35,7 @@ PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
 RCC.LPTIM1Freq_Value=64000000
 NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
 NVIC.EXTI1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+PB4\ (NJTRST).GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
 RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_SYSCLK
 SPI1.Direction=SPI_DIRECTION_2LINES
 RCC.APB2TimFreq_Value=64000000
@@ -47,6 +48,7 @@ PA1.GPIO_PuPd=GPIO_PULLDOWN
 RCC.PREFETCH_ENABLE=1
 PB13.Locked=true
 RCC.USART3Freq_Value=64000000
+NVIC.EXTI15_10_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
 ProjectManager.ProjectBuild=false
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 PA0.Locked=true
@@ -214,8 +216,8 @@ ADC1.master=1
 PA3.Locked=true
 Mcu.Pin21=PB2
 PA10.Locked=true
-NVIC.ForceEnableDMAVector=true
 PA14\ (JTCK-SWCLK).Locked=true
+NVIC.ForceEnableDMAVector=true
 NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 ProjectManager.CompilerOptimize=6
 PA11.Signal=USB_OTG_FS_DM
@@ -314,6 +316,7 @@ Mcu.Pin0=PC13
 SPI3.DataSize=SPI_DATASIZE_8BIT
 Mcu.Pin1=PC14-OSC32_IN (PC14)
 TIM8.IPParameters=Channel-Input_Capture2_from_TI2,ICPolarity_CH2,Prescaler,Period
+GPIO.groupedBy=Group By Peripherals
 Mcu.Pin2=PC15-OSC32_OUT (PC15)
 Mcu.Pin3=PH0-OSC_IN (PH0)
 Mcu.Pin4=PH1-OSC_OUT (PH1)
@@ -399,7 +402,7 @@ PC8.GPIO_Label=DISPLAY_CS
 USART1.VirtualMode-Asynchronous=VM_ASYNC
 FREERTOS.configUSE_IDLE_HOOK=1
 PA9.Mode=Asynchronous
-PB4\ (NJTRST).GPIOParameters=GPIO_PuPd,GPIO_Label
+PB4\ (NJTRST).GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
 NVIC.TIM8_CC_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
 PB14.PinState=GPIO_PIN_SET
 ProjectManager.TargetToolchain=Makefile
@@ -425,7 +428,7 @@ RCC.UART4Freq_Value=64000000
 SPI3.CalculateBaudRate=1000.0 KBits/s
 MxCube.Version=6.0.1
 PA13\ (JTMS-SWDIO).GPIO_Label=TMS
-PC13.GPIOParameters=GPIO_PuPd,GPIO_Label
+PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
 RCC.PLLSAI1QoutputFreq_Value=48000000
 RCC.ADCFreq_Value=64000000
 SPI3.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_64
@@ -456,6 +459,7 @@ SH.GPXTI4.0=GPIO_EXTI4
 RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
 KeepUserPlacement=false
 TIM5.Prescaler=500 - 1
+PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
 PC5.GPIO_Label=RFID_RF_IN
 PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
 SH.GPXTI9.ConfNb=1