Added external CC1101 support

This commit is contained in:
Victor 2023-02-02 22:47:50 +03:00
parent 7edf90c2e5
commit 5458157924
28 changed files with 480 additions and 240 deletions

View File

@ -36,13 +36,13 @@ struct SubGhzFrequencyAnalyzerWorker {
};
static void subghz_frequency_analyzer_worker_load_registers(const uint8_t data[][2]) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
size_t i = 0;
while(data[i][0]) {
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, data[i][0], data[i][1]);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, data[i][0], data[i][1]);
i++;
}
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
// running average with adaptive coefficient
@ -80,26 +80,26 @@ static int32_t subghz_frequency_analyzer_worker_thread(void* context) {
//Start CC1101
furi_hal_subghz_reset();
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_flush_rx(&furi_hal_spi_bus_handle_subghz);
cc1101_flush_tx(&furi_hal_spi_bus_handle_subghz);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHW);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_MDMCFG3,
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_flush_rx(furi_hal_subghz.spi_bus_handle);
cc1101_flush_tx(furi_hal_subghz.spi_bus_handle);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHW);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_MDMCFG3,
0b01111111); // symbol rate
cc1101_write_reg(
&furi_hal_spi_bus_handle_subghz,
furi_hal_subghz.spi_bus_handle,
CC1101_AGCCTRL2,
0b00000111); // 00 - DVGA all; 000 - MAX LNA+LNA2; 111 - MAGN_TARGET 42 dB
cc1101_write_reg(
&furi_hal_spi_bus_handle_subghz,
furi_hal_subghz.spi_bus_handle,
CC1101_AGCCTRL1,
0b00001000); // 0; 0 - LNA 2 gain is decreased to minimum before decreasing LNA gain; 00 - Relative carrier sense threshold disabled; 1000 - Absolute carrier sense threshold disabled
cc1101_write_reg(
&furi_hal_spi_bus_handle_subghz,
furi_hal_subghz.spi_bus_handle,
CC1101_AGCCTRL0,
0b00110000); // 00 - No hysteresis, medium asymmetric dead zone, medium gain ; 11 - 64 samples agc; 00 - Normal AGC, 00 - 4dB boundary
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
furi_hal_subghz_set_path(FuriHalSubGhzPathIsolate);
@ -118,20 +118,23 @@ static int32_t subghz_frequency_analyzer_worker_thread(void* context) {
// First stage: coarse scan
for(size_t i = 0; i < subghz_setting_get_frequency_count(instance->setting); i++) {
if(furi_hal_subghz_is_frequency_valid(
subghz_setting_get_frequency(instance->setting, i))) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
subghz_setting_get_frequency(instance->setting, i)) &&
!((furi_hal_subghz.radio_type == SubGhzRadioExternal) &&
(subghz_setting_get_frequency(instance->setting, i) >= 311900000 &&
subghz_setting_get_frequency(instance->setting, i) <= 312200000))) {
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
frequency = cc1101_set_frequency(
&furi_hal_spi_bus_handle_subghz,
furi_hal_subghz.spi_bus_handle,
subghz_setting_get_frequency(instance->setting, i));
cc1101_calibrate(&furi_hal_spi_bus_handle_subghz);
cc1101_calibrate(furi_hal_subghz.spi_bus_handle);
do {
status = cc1101_get_status(&furi_hal_spi_bus_handle_subghz);
status = cc1101_get_status(furi_hal_subghz.spi_bus_handle);
} while(status.STATE != CC1101StateIDLE);
cc1101_switch_to_rx(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_rx(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
furi_delay_ms(2);
@ -166,17 +169,17 @@ static int32_t subghz_frequency_analyzer_worker_thread(void* context) {
i < frequency_rssi.frequency_coarse + 300000;
i += 20000) {
if(furi_hal_subghz_is_frequency_valid(i)) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
frequency = cc1101_set_frequency(&furi_hal_spi_bus_handle_subghz, i);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
frequency = cc1101_set_frequency(furi_hal_subghz.spi_bus_handle, i);
cc1101_calibrate(&furi_hal_spi_bus_handle_subghz);
cc1101_calibrate(furi_hal_subghz.spi_bus_handle);
do {
status = cc1101_get_status(&furi_hal_spi_bus_handle_subghz);
status = cc1101_get_status(furi_hal_subghz.spi_bus_handle);
} while(status.STATE != CC1101StateIDLE);
cc1101_switch_to_rx(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_rx(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
furi_delay_ms(2);

View File

@ -26,6 +26,7 @@ ADD_SCENE(subghz, set_fix_bft, SetFixBft)
ADD_SCENE(subghz, set_cnt_bft, SetCntBft)
ADD_SCENE(subghz, set_seed_bft, SetSeedBft)
ADD_SCENE(subghz, frequency_analyzer, FrequencyAnalyzer)
ADD_SCENE(subghz, ext_module_settings, ExtModuleSettings)
ADD_SCENE(subghz, read_raw, ReadRAW)
ADD_SCENE(subghz, more_raw, MoreRAW)
ADD_SCENE(subghz, decode_raw, DecodeRAW)

View File

@ -0,0 +1,54 @@
#include "../subghz_i.h"
#include "../helpers/subghz_custom_event.h"
uint8_t value_index;
#define EXT_MODULES_COUNT (sizeof(radio_modules_variables_text) / sizeof(char* const))
const char* const radio_modules_variables_text[] = {
"Internal",
"External",
};
static void subghz_scene_ext_module_changed(VariableItem* item) {
SubGhz* subghz = variable_item_get_context(item);
value_index = variable_item_get_current_value_index(item);
UNUSED(subghz);
variable_item_set_current_value_text(item, radio_modules_variables_text[value_index]);
}
static void subghz_ext_module_start_var_list_enter_callback(void* context, uint32_t index) {
SubGhz* subghz = context;
view_dispatcher_send_custom_event(subghz->view_dispatcher, index);
}
void subghz_scene_ext_module_settings_on_enter(void* context) {
SubGhz* subghz = context;
VariableItemList* variable_item_list = subghz->variable_item_list;
value_index = furi_hal_subghz.radio_type;
VariableItem* item = variable_item_list_add(
variable_item_list, "Module", EXT_MODULES_COUNT, subghz_scene_ext_module_changed, subghz);
variable_item_list_set_enter_callback(
variable_item_list, subghz_ext_module_start_var_list_enter_callback, subghz);
variable_item_set_current_value_index(item, value_index);
variable_item_set_current_value_text(item, radio_modules_variables_text[value_index]);
view_dispatcher_switch_to_view(subghz->view_dispatcher, SubGhzViewIdVariableItemList);
}
bool subghz_scene_ext_module_settings_on_event(void* context, SceneManagerEvent event) {
SubGhz* subghz = context;
UNUSED(subghz);
UNUSED(event);
return false;
}
void subghz_scene_ext_module_settings_on_exit(void* context) {
SubGhz* subghz = context;
variable_item_list_reset(subghz->variable_item_list);
furi_hal_subghz_set_radio_type(value_index);
}

View File

@ -53,7 +53,10 @@ static void subghz_scene_receiver_update_statusbar(void* context) {
} else {
subghz_get_frequency_modulation(subghz, frequency_str, NULL);
furi_string_printf(
modulation_str, "Mod: %s", furi_string_get_cstr(subghz->txrx->preset->name));
modulation_str,
"%s Mod: %s",
furi_hal_subghz_get_radio_type() ? "Ext" : "Int",
furi_string_get_cstr(subghz->txrx->preset->name));
}
#else
subghz_get_frequency_modulation(subghz, frequency_str, modulation_str);

View File

@ -10,6 +10,7 @@ enum SubmenuIndex {
SubmenuIndexAddManually,
SubmenuIndexFrequencyAnalyzer,
SubmenuIndexReadRAW,
SubmenuIndexExtSettings,
};
void subghz_scene_start_submenu_callback(void* context, uint32_t index) {
@ -54,6 +55,12 @@ void subghz_scene_start_on_enter(void* context) {
SubmenuIndexFrequencyAnalyzer,
subghz_scene_start_submenu_callback,
subghz);
submenu_add_item(
subghz->submenu,
"Radio settings",
SubmenuIndexExtSettings,
subghz_scene_start_submenu_callback,
subghz);
if(furi_hal_rtc_is_flag_set(FuriHalRtcFlagDebug)) {
submenu_add_item(
subghz->submenu, "Test", SubmenuIndexTest, subghz_scene_start_submenu_callback, subghz);
@ -72,7 +79,17 @@ bool subghz_scene_start_on_event(void* context, SceneManagerEvent event) {
view_dispatcher_stop(subghz->view_dispatcher);
return true;
} else if(event.type == SceneManagerEventTypeCustom) {
if(event.event == SubmenuIndexReadRAW) {
if(event.event == SubmenuIndexExtSettings) {
scene_manager_set_scene_state(
subghz->scene_manager, SubGhzSceneStart, SubmenuIndexExtSettings);
scene_manager_next_scene(subghz->scene_manager, SubGhzSceneExtModuleSettings);
return true;
} else if(!furi_hal_subghz_check_radio()) {
furi_string_set(subghz->error_str, "Please connect\nexternal radio");
scene_manager_next_scene(subghz->scene_manager, SubGhzSceneShowErrorSub);
return true;
} else if(event.event == SubmenuIndexReadRAW) {
scene_manager_set_scene_state(
subghz->scene_manager, SubGhzSceneStart, SubmenuIndexReadRAW);
subghz->txrx->rx_key_state = SubGhzRxKeyStateIDLE;
@ -99,7 +116,6 @@ bool subghz_scene_start_on_event(void* context, SceneManagerEvent event) {
scene_manager_next_scene(subghz->scene_manager, SubGhzSceneFrequencyAnalyzer);
DOLPHIN_DEED(DolphinDeedSubGhzFrequencyAnalyzer);
return true;
} else if(event.event == SubmenuIndexTest) {
scene_manager_set_scene_state(
subghz->scene_manager, SubGhzSceneStart, SubmenuIndexTest);

View File

@ -42,8 +42,9 @@ void subghz_cli_command_tx_carrier(Cli* cli, FuriString* args, void* context) {
furi_hal_subghz_load_preset(FuriHalSubGhzPresetOok650Async);
frequency = furi_hal_subghz_set_frequency_and_path(frequency);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(&gpio_cc1101_g0, true);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, true);
furi_hal_power_suppress_charge_enter();
@ -264,7 +265,7 @@ void subghz_cli_command_rx(Cli* cli, FuriString* args, void* context) {
furi_hal_subghz_reset();
furi_hal_subghz_load_preset(FuriHalSubGhzPresetOok650Async);
frequency = furi_hal_subghz_set_frequency_and_path(frequency);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_power_suppress_charge_enter();

View File

@ -69,7 +69,7 @@ void subghz_begin(SubGhz* subghz, uint8_t* preset_data) {
furi_hal_subghz_reset();
furi_hal_subghz_idle();
furi_hal_subghz_load_custom_preset(preset_data);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
subghz->txrx->txrx_state = SubGhzTxRxStateIDLE;
}
@ -84,7 +84,7 @@ uint32_t subghz_rx(SubGhz* subghz, uint32_t frequency) {
furi_hal_subghz_idle();
uint32_t value = furi_hal_subghz_set_frequency_and_path(frequency);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_flush_rx();
subghz_speaker_on(subghz);
furi_hal_subghz_rx();
@ -103,8 +103,9 @@ static bool subghz_tx(SubGhz* subghz, uint32_t frequency) {
furi_assert(subghz->txrx->txrx_state != SubGhzTxRxStateSleep);
furi_hal_subghz_idle();
furi_hal_subghz_set_frequency_and_path(frequency);
furi_hal_gpio_write(&gpio_cc1101_g0, false);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, false);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
subghz_speaker_on(subghz);
bool ret = furi_hal_subghz_tx();
subghz->txrx->txrx_state = SubGhzTxRxStateTx;

View File

@ -230,13 +230,21 @@ void subghz_view_receiver_draw(Canvas* canvas, SubGhzViewReceiverModel* model) {
if(model->history_item == 0) {
if(model->mode == SubGhzViewReceiverModeLive) {
canvas_draw_icon(canvas, 0, 0, &I_Scanning_123x52);
canvas_draw_icon(
canvas,
0,
0,
furi_hal_subghz_get_radio_type() ? &I_Fishing_123x52 : &I_Scanning_123x52);
canvas_set_font(canvas, FontPrimary);
canvas_draw_str(canvas, 63, 46, "Scanning...");
canvas_draw_line(canvas, 46, 51, 125, 51);
canvas_set_font(canvas, FontSecondary);
} else {
canvas_draw_icon(canvas, 0, 0, &I_Scanning_123x52);
canvas_draw_icon(
canvas,
0,
0,
furi_hal_subghz_get_radio_type() ? &I_Fishing_123x52 : &I_Scanning_123x52);
canvas_set_font(canvas, FontPrimary);
canvas_draw_str(canvas, 63, 46, "Decoding...");
canvas_set_font(canvas, FontSecondary);

View File

@ -165,6 +165,7 @@ void subghz_frequency_analyzer_draw(Canvas* canvas, SubGhzFrequencyAnalyzerModel
// Title
canvas_set_color(canvas, ColorBlack);
canvas_set_font(canvas, FontSecondary);
canvas_draw_str(canvas, 0, 7, furi_hal_subghz_get_radio_type() ? "Ext" : "Int");
canvas_draw_str(canvas, 20, 7, "Frequency Analyzer");
// RSSI

View File

@ -280,8 +280,9 @@ void subghz_read_raw_draw(Canvas* canvas, SubGhzReadRAWModel* model) {
uint8_t graphics_mode = 1;
canvas_set_color(canvas, ColorBlack);
canvas_set_font(canvas, FontSecondary);
canvas_draw_str(canvas, 5, 7, furi_string_get_cstr(model->frequency_str));
canvas_draw_str(canvas, 40, 7, furi_string_get_cstr(model->preset_str));
canvas_draw_str(canvas, 0, 7, furi_string_get_cstr(model->frequency_str));
canvas_draw_str(canvas, 35, 7, furi_string_get_cstr(model->preset_str));
canvas_draw_str(canvas, 70, 7, furi_hal_subghz_get_radio_type() ? "E" : "I");
canvas_draw_str_aligned(
canvas, 126, 0, AlignRight, AlignTop, furi_string_get_cstr(model->sample_write));

View File

@ -115,14 +115,16 @@ bool subghz_test_carrier_input(InputEvent* event, void* context) {
furi_hal_subghz_set_path(model->path);
if(model->status == SubGhzTestCarrierModelStatusRx) {
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_rx();
} else {
furi_hal_gpio_init(
&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(&gpio_cc1101_g0, true);
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, true);
if(!furi_hal_subghz_tx()) {
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
subghz_test_carrier->callback(
SubGhzTestCarrierEventOnlyRx, subghz_test_carrier->context);
}
@ -140,7 +142,7 @@ void subghz_test_carrier_enter(void* context) {
furi_hal_subghz_reset();
furi_hal_subghz_load_preset(FuriHalSubGhzPresetOok650Async);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
with_view_model(
subghz_test_carrier->view,

View File

@ -143,8 +143,9 @@ void subghz_test_static_enter(void* context) {
furi_hal_subghz_reset();
furi_hal_subghz_load_preset(FuriHalSubGhzPresetOok650Async);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(&gpio_cc1101_g0, false);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, false);
instance->status_tx = SubGhzTestStaticStatusIDLE;
with_view_model(

View File

@ -85,8 +85,9 @@ void subghz_view_transmitter_draw(Canvas* canvas, SubGhzViewTransmitterModel* mo
canvas_set_color(canvas, ColorBlack);
canvas_set_font(canvas, FontSecondary);
elements_multiline_text(canvas, 0, 7, furi_string_get_cstr(model->key_str));
canvas_draw_str(canvas, 78, 7, furi_string_get_cstr(model->frequency_str));
canvas_draw_str(canvas, 113, 7, furi_string_get_cstr(model->preset_str));
canvas_draw_str(canvas, 72, 7, furi_string_get_cstr(model->frequency_str));
canvas_draw_str(canvas, 107, 7, furi_string_get_cstr(model->preset_str));
canvas_draw_str(canvas, 123, 7, furi_hal_subghz_get_radio_type() ? "E" : "I");
if(model->show_button) subghz_view_transmitter_button_right(canvas, "Send");
}

View File

@ -522,13 +522,14 @@ static bool unirfremix_send_sub(UniRFRemix* app, FlipperFormat* fff_data) {
furi_hal_subghz_reset();
furi_hal_subghz_idle();
furi_hal_subghz_load_custom_preset(app->txpreset->data);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_idle();
furi_hal_subghz_set_frequency_and_path(app->txpreset->frequency);
furi_hal_gpio_write(&gpio_cc1101_g0, false);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, false);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
if(!furi_hal_subghz_tx()) {
FURI_LOG_E(TAG, "Sending not allowed");

View File

@ -40,7 +40,7 @@ void pcsg_begin(POCSAGPagerApp* app, uint8_t* preset_data) {
furi_hal_subghz_reset();
furi_hal_subghz_idle();
furi_hal_subghz_load_custom_preset(preset_data);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
app->txrx->txrx_state = PCSGTxRxStateIDLE;
}
@ -54,7 +54,7 @@ uint32_t pcsg_rx(POCSAGPagerApp* app, uint32_t frequency) {
furi_hal_subghz_idle();
uint32_t value = furi_hal_subghz_set_frequency_and_path(frequency);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_flush_rx();
furi_hal_subghz_rx();

View File

@ -52,7 +52,7 @@ void radio_begin(ProtoViewApp* app) {
} else {
furi_hal_subghz_load_custom_preset(ProtoViewModulations[app->modulation].custom);
}
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
app->txrx->txrx_state = TxRxStateIDLE;
}
@ -80,7 +80,7 @@ uint32_t radio_rx(ProtoViewApp* app) {
furi_hal_subghz_idle(); /* Put it into idle state in case it is sleeping. */
uint32_t value = furi_hal_subghz_set_frequency_and_path(app->frequency);
FURI_LOG_E(TAG, "Switched to frequency: %lu", value);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_flush_rx();
furi_hal_subghz_rx();
if(!app->txrx->debug_timer_sampling) {
@ -134,8 +134,9 @@ void radio_tx_signal(ProtoViewApp* app, FuriHalSubGhzAsyncTxCallback data_feeder
furi_hal_subghz_idle();
uint32_t value = furi_hal_subghz_set_frequency_and_path(app->frequency);
FURI_LOG_E(TAG, "Switched to frequency: %lu", value);
furi_hal_gpio_write(&gpio_cc1101_g0, false);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, false);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_start_async_tx(data_feeder, ctx);
while(!furi_hal_subghz_is_async_tx_complete()) furi_delay_ms(10);
@ -156,7 +157,7 @@ void radio_tx_signal(ProtoViewApp* app, FuriHalSubGhzAsyncTxCallback data_feeder
void protoview_timer_isr(void* ctx) {
ProtoViewApp* app = ctx;
bool level = furi_hal_gpio_read(&gpio_cc1101_g0);
bool level = furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin);
if(app->txrx->last_g0_value != level) {
uint32_t now = DWT->CYCCNT;
uint32_t dur = now - app->txrx->last_g0_change_time;

View File

@ -95,7 +95,7 @@ void view_enter_direct_sampling(ProtoViewApp* app) {
* to stop the async RX will put it into idle) and configure the
* G0 pin for reading. */
furi_hal_subghz_rx();
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
} else {
raw_sampling_worker_stop(app);
}
@ -127,7 +127,7 @@ static void ds_timer_isr(void* ctx) {
DirectSamplingViewPrivData* privdata = app->view_privdata;
if(app->direct_sampling_enabled) {
bool level = furi_hal_gpio_read(&gpio_cc1101_g0);
bool level = furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin);
bitmap_set(privdata->captured, CAPTURED_BITMAP_BYTES, privdata->captured_idx, level);
privdata->captured_idx = (privdata->captured_idx + 1) % CAPTURED_BITMAP_BITS;
}

View File

@ -58,7 +58,7 @@ void ws_begin(WeatherStationApp* app, uint8_t* preset_data) {
furi_hal_subghz_reset();
furi_hal_subghz_idle();
furi_hal_subghz_load_custom_preset(preset_data);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
app->txrx->txrx_state = WSTxRxStateIDLE;
}
@ -72,7 +72,7 @@ uint32_t ws_rx(WeatherStationApp* app, uint32_t frequency) {
furi_hal_subghz_idle();
uint32_t value = furi_hal_subghz_set_frequency_and_path(frequency);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_flush_rx();
furi_hal_subghz_rx();

Binary file not shown.

After

Width:  |  Height:  |  Size: 966 B

View File

@ -1334,13 +1334,18 @@ Function,+,furi_hal_spi_deinit_early,void,
Function,-,furi_hal_spi_init,void,
Function,+,furi_hal_spi_init_early,void,
Function,+,furi_hal_spi_release,void,FuriHalSpiBusHandle*
Function,+,furi_hal_subghz_check_radio,_Bool,
Function,+,furi_hal_subghz_disable_ext_power,void,
Function,-,furi_hal_subghz_dump_state,void,
Function,+,furi_hal_subghz_enable_ext_power,void,
Function,+,furi_hal_subghz_flush_rx,void,
Function,+,furi_hal_subghz_flush_tx,void,
Function,+,furi_hal_subghz_get_lqi,uint8_t,
Function,+,furi_hal_subghz_get_radio_type,SubGhzRadioType,
Function,+,furi_hal_subghz_get_rssi,float,
Function,+,furi_hal_subghz_idle,void,
Function,-,furi_hal_subghz_init,void,
Function,+,furi_hal_subghz_init_check,_Bool,
Function,+,furi_hal_subghz_is_async_tx_complete,_Bool,
Function,+,furi_hal_subghz_is_frequency_valid,_Bool,uint32_t
Function,+,furi_hal_subghz_is_rx_data_crc_valid,_Bool,
@ -1357,6 +1362,7 @@ Function,+,furi_hal_subghz_set_async_mirror_pin,void,const GpioPin*
Function,+,furi_hal_subghz_set_frequency,uint32_t,uint32_t
Function,+,furi_hal_subghz_set_frequency_and_path,uint32_t,uint32_t
Function,+,furi_hal_subghz_set_path,void,FuriHalSubGhzPath
Function,+,furi_hal_subghz_set_radio_type,_Bool,SubGhzRadioType
Function,-,furi_hal_subghz_shutdown,void,
Function,+,furi_hal_subghz_sleep,void,
Function,+,furi_hal_subghz_start_async_rx,void,"FuriHalSubGhzCaptureCallback, void*"
@ -4555,12 +4561,15 @@ Variable,+,furi_hal_spi_bus_handle_nfc,FuriHalSpiBusHandle,
Variable,+,furi_hal_spi_bus_handle_sd_fast,FuriHalSpiBusHandle,
Variable,+,furi_hal_spi_bus_handle_sd_slow,FuriHalSpiBusHandle,
Variable,+,furi_hal_spi_bus_handle_subghz,FuriHalSpiBusHandle,
Variable,+,furi_hal_spi_bus_handle_subghz_ext,FuriHalSpiBusHandle,
Variable,+,furi_hal_spi_bus_handle_subghz_int,FuriHalSpiBusHandle,
Variable,+,furi_hal_spi_bus_r,FuriHalSpiBus,
Variable,+,furi_hal_spi_preset_1edge_low_16m,const LL_SPI_InitTypeDef,
Variable,+,furi_hal_spi_preset_1edge_low_2m,const LL_SPI_InitTypeDef,
Variable,+,furi_hal_spi_preset_1edge_low_4m,const LL_SPI_InitTypeDef,
Variable,+,furi_hal_spi_preset_1edge_low_8m,const LL_SPI_InitTypeDef,
Variable,+,furi_hal_spi_preset_2edge_low_8m,const LL_SPI_InitTypeDef,
Variable,+,furi_hal_subghz,volatile FuriHalSubGhz,
Variable,+,gpio_button_back,const GpioPin,
Variable,+,gpio_button_down,const GpioPin,
Variable,+,gpio_button_left,const GpioPin,
@ -4568,6 +4577,7 @@ Variable,+,gpio_button_ok,const GpioPin,
Variable,+,gpio_button_right,const GpioPin,
Variable,+,gpio_button_up,const GpioPin,
Variable,+,gpio_cc1101_g0,const GpioPin,
Variable,+,gpio_cc1101_g0_ext,const GpioPin,
Variable,+,gpio_display_cs,const GpioPin,
Variable,+,gpio_display_di,const GpioPin,
Variable,+,gpio_display_rst_n,const GpioPin,
@ -4596,9 +4606,13 @@ Variable,+,gpio_spi_d_miso,const GpioPin,
Variable,+,gpio_spi_d_mosi,const GpioPin,
Variable,+,gpio_spi_d_sck,const GpioPin,
Variable,+,gpio_spi_r_miso,const GpioPin,
Variable,+,gpio_spi_r_miso_ext,const GpioPin,
Variable,+,gpio_spi_r_mosi,const GpioPin,
Variable,+,gpio_spi_r_mosi_ext,const GpioPin,
Variable,+,gpio_spi_r_sck,const GpioPin,
Variable,+,gpio_spi_r_sck_ext,const GpioPin,
Variable,+,gpio_subghz_cs,const GpioPin,
Variable,+,gpio_subghz_cs_ext,const GpioPin,
Variable,+,gpio_usart_rx,const GpioPin,
Variable,+,gpio_usart_tx,const GpioPin,
Variable,+,gpio_usb_dm,const GpioPin,

1 entry status name type params
1334 Function - furi_hal_spi_init void
1335 Function + furi_hal_spi_init_early void
1336 Function + furi_hal_spi_release void FuriHalSpiBusHandle*
1337 Function + furi_hal_subghz_check_radio _Bool
1338 Function + furi_hal_subghz_disable_ext_power void
1339 Function - furi_hal_subghz_dump_state void
1340 Function + furi_hal_subghz_enable_ext_power void
1341 Function + furi_hal_subghz_flush_rx void
1342 Function + furi_hal_subghz_flush_tx void
1343 Function + furi_hal_subghz_get_lqi uint8_t
1344 Function + furi_hal_subghz_get_radio_type SubGhzRadioType
1345 Function + furi_hal_subghz_get_rssi float
1346 Function + furi_hal_subghz_idle void
1347 Function - furi_hal_subghz_init void
1348 Function + furi_hal_subghz_init_check _Bool
1349 Function + furi_hal_subghz_is_async_tx_complete _Bool
1350 Function + furi_hal_subghz_is_frequency_valid _Bool uint32_t
1351 Function + furi_hal_subghz_is_rx_data_crc_valid _Bool
1362 Function + furi_hal_subghz_set_frequency uint32_t uint32_t
1363 Function + furi_hal_subghz_set_frequency_and_path uint32_t uint32_t
1364 Function + furi_hal_subghz_set_path void FuriHalSubGhzPath
1365 Function + furi_hal_subghz_set_radio_type _Bool SubGhzRadioType
1366 Function - furi_hal_subghz_shutdown void
1367 Function + furi_hal_subghz_sleep void
1368 Function + furi_hal_subghz_start_async_rx void FuriHalSubGhzCaptureCallback, void*
4561 Variable + furi_hal_spi_bus_handle_sd_fast FuriHalSpiBusHandle
4562 Variable + furi_hal_spi_bus_handle_sd_slow FuriHalSpiBusHandle
4563 Variable + furi_hal_spi_bus_handle_subghz FuriHalSpiBusHandle
4564 Variable + furi_hal_spi_bus_handle_subghz_ext FuriHalSpiBusHandle
4565 Variable + furi_hal_spi_bus_handle_subghz_int FuriHalSpiBusHandle
4566 Variable + furi_hal_spi_bus_r FuriHalSpiBus
4567 Variable + furi_hal_spi_preset_1edge_low_16m const LL_SPI_InitTypeDef
4568 Variable + furi_hal_spi_preset_1edge_low_2m const LL_SPI_InitTypeDef
4569 Variable + furi_hal_spi_preset_1edge_low_4m const LL_SPI_InitTypeDef
4570 Variable + furi_hal_spi_preset_1edge_low_8m const LL_SPI_InitTypeDef
4571 Variable + furi_hal_spi_preset_2edge_low_8m const LL_SPI_InitTypeDef
4572 Variable + furi_hal_subghz volatile FuriHalSubGhz
4573 Variable + gpio_button_back const GpioPin
4574 Variable + gpio_button_down const GpioPin
4575 Variable + gpio_button_left const GpioPin
4577 Variable + gpio_button_right const GpioPin
4578 Variable + gpio_button_up const GpioPin
4579 Variable + gpio_cc1101_g0 const GpioPin
4580 Variable + gpio_cc1101_g0_ext const GpioPin
4581 Variable + gpio_display_cs const GpioPin
4582 Variable + gpio_display_di const GpioPin
4583 Variable + gpio_display_rst_n const GpioPin
4606 Variable + gpio_spi_d_mosi const GpioPin
4607 Variable + gpio_spi_d_sck const GpioPin
4608 Variable + gpio_spi_r_miso const GpioPin
4609 Variable + gpio_spi_r_miso_ext const GpioPin
4610 Variable + gpio_spi_r_mosi const GpioPin
4611 Variable + gpio_spi_r_mosi_ext const GpioPin
4612 Variable + gpio_spi_r_sck const GpioPin
4613 Variable + gpio_spi_r_sck_ext const GpioPin
4614 Variable + gpio_subghz_cs const GpioPin
4615 Variable + gpio_subghz_cs_ext const GpioPin
4616 Variable + gpio_usart_rx const GpioPin
4617 Variable + gpio_usart_tx const GpioPin
4618 Variable + gpio_usb_dm const GpioPin

View File

@ -8,9 +8,11 @@ const GpioPin vibro_gpio = {.port = VIBRO_GPIO_Port, .pin = VIBRO_Pin};
const GpioPin ibutton_gpio = {.port = iBTN_GPIO_Port, .pin = iBTN_Pin};
const GpioPin gpio_cc1101_g0 = {.port = CC1101_G0_GPIO_Port, .pin = CC1101_G0_Pin};
const GpioPin gpio_cc1101_g0_ext = {.port = GPIOB, .pin = LL_GPIO_PIN_2};
const GpioPin gpio_rf_sw_0 = {.port = RF_SW_0_GPIO_Port, .pin = RF_SW_0_Pin};
const GpioPin gpio_subghz_cs = {.port = CC1101_CS_GPIO_Port, .pin = CC1101_CS_Pin};
const GpioPin gpio_subghz_cs_ext = {.port = GPIOA, .pin = LL_GPIO_PIN_4};
const GpioPin gpio_display_cs = {.port = DISPLAY_CS_GPIO_Port, .pin = DISPLAY_CS_Pin};
const GpioPin gpio_display_rst_n = {.port = DISPLAY_RST_GPIO_Port, .pin = DISPLAY_RST_Pin};
const GpioPin gpio_display_di = {.port = DISPLAY_DI_GPIO_Port, .pin = DISPLAY_DI_Pin};
@ -31,6 +33,9 @@ const GpioPin gpio_spi_d_sck = {.port = SPI_D_SCK_GPIO_Port, .pin = SPI_D_SCK_Pi
const GpioPin gpio_spi_r_miso = {.port = SPI_R_MISO_GPIO_Port, .pin = SPI_R_MISO_Pin};
const GpioPin gpio_spi_r_mosi = {.port = SPI_R_MOSI_GPIO_Port, .pin = SPI_R_MOSI_Pin};
const GpioPin gpio_spi_r_sck = {.port = SPI_R_SCK_GPIO_Port, .pin = SPI_R_SCK_Pin};
const GpioPin gpio_spi_r_miso_ext = {.port = GPIOA, .pin = LL_GPIO_PIN_6};
const GpioPin gpio_spi_r_mosi_ext = {.port = GPIOA, .pin = LL_GPIO_PIN_7};
const GpioPin gpio_spi_r_sck_ext = {.port = GPIOB, .pin = LL_GPIO_PIN_3};
const GpioPin gpio_ext_pc0 = {.port = GPIOC, .pin = LL_GPIO_PIN_0};
const GpioPin gpio_ext_pc1 = {.port = GPIOC, .pin = LL_GPIO_PIN_1};

View File

@ -45,9 +45,11 @@ extern const GpioPin vibro_gpio;
extern const GpioPin ibutton_gpio;
extern const GpioPin gpio_cc1101_g0;
extern const GpioPin gpio_cc1101_g0_ext;
extern const GpioPin gpio_rf_sw_0;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_subghz_cs_ext;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_display_rst_n;
extern const GpioPin gpio_display_di;
@ -68,6 +70,9 @@ extern const GpioPin gpio_spi_d_sck;
extern const GpioPin gpio_spi_r_miso;
extern const GpioPin gpio_spi_r_mosi;
extern const GpioPin gpio_spi_r_sck;
extern const GpioPin gpio_spi_r_miso_ext;
extern const GpioPin gpio_spi_r_mosi_ext;
extern const GpioPin gpio_spi_r_sck_ext;
extern const GpioPin gpio_ext_pc0;
extern const GpioPin gpio_ext_pc1;

View File

@ -1,6 +1,7 @@
#include "furi_hal_spi.h"
#include "furi_hal_resources.h"
#include <furi_hal_power.h>
#include <furi_hal_subghz.h>
#include <stdbool.h>
#include <string.h>
@ -25,7 +26,7 @@ void furi_hal_spi_deinit_early() {
void furi_hal_spi_init() {
furi_hal_spi_bus_init(&furi_hal_spi_bus_r);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_bus_handle_init(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_nfc);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_sd_fast);
furi_hal_spi_bus_handle_init(&furi_hal_spi_bus_handle_sd_slow);

View File

@ -260,6 +260,15 @@ static void furi_hal_spi_bus_handle_subghz_event_callback(
furi_hal_spi_bus_r_handle_event_callback(handle, event, &furi_hal_spi_preset_1edge_low_8m);
}
FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz_int = {
.bus = &furi_hal_spi_bus_r,
.callback = furi_hal_spi_bus_handle_subghz_event_callback,
.miso = &gpio_spi_r_miso,
.mosi = &gpio_spi_r_mosi,
.sck = &gpio_spi_r_sck,
.cs = &gpio_subghz_cs,
};
FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz = {
.bus = &furi_hal_spi_bus_r,
.callback = furi_hal_spi_bus_handle_subghz_event_callback,
@ -269,6 +278,15 @@ FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz = {
.cs = &gpio_subghz_cs,
};
FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz_ext = {
.bus = &furi_hal_spi_bus_r,
.callback = furi_hal_spi_bus_handle_subghz_event_callback,
.miso = &gpio_ext_pa6,
.mosi = &gpio_ext_pa7,
.sck = &gpio_ext_pb3,
.cs = &gpio_ext_pa4,
};
static void furi_hal_spi_bus_handle_nfc_event_callback(
FuriHalSpiBusHandle* handle,
FuriHalSpiBusHandleEvent event) {

View File

@ -27,8 +27,12 @@ extern FuriHalSpiBus furi_hal_spi_bus_r;
/** Furi Hal Spi Bus D (Display, SdCard) */
extern FuriHalSpiBus furi_hal_spi_bus_d;
/** CC1101 on `furi_hal_spi_bus_r` */
/** CC1101 on current SPI bus */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz;
/** CC1101 on `furi_hal_spi_bus_r` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz_int;
/** CC1101 on external `furi_hal_spi_bus_r` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz_ext;
/** ST25R3916 on `furi_hal_spi_bus_r` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_nfc;

View File

@ -6,6 +6,7 @@
#include <furi_hal_spi.h>
#include <furi_hal_interrupt.h>
#include <furi_hal_resources.h>
#include <furi_hal_power.h>
#include <stm32wbxx_ll_dma.h>
@ -16,95 +17,169 @@
#include <stdio.h>
#define TAG "FuriHalSubGhz"
//Initialisation timeout (ms)
#define INIT_TIMEOUT 10
static uint32_t furi_hal_subghz_debug_gpio_buff[2];
typedef struct {
volatile SubGhzState state;
volatile SubGhzRegulation regulation;
volatile FuriHalSubGhzPreset preset;
const GpioPin* async_mirror_pin;
} FuriHalSubGhz;
static bool last_OTG_state = false;
volatile FuriHalSubGhz furi_hal_subghz = {
.state = SubGhzStateInit,
.regulation = SubGhzRegulationTxRx,
.preset = FuriHalSubGhzPresetIDLE,
.async_mirror_pin = NULL,
.radio_type = SubGhzRadioInternal,
.spi_bus_handle = &furi_hal_spi_bus_handle_subghz,
.cc1101_g0_pin = &gpio_cc1101_g0,
};
bool furi_hal_subghz_set_radio_type(SubGhzRadioType state) {
furi_hal_subghz.radio_type = state;
furi_hal_spi_bus_handle_deinit(furi_hal_subghz.spi_bus_handle);
if(state) {
furi_hal_subghz.spi_bus_handle = &furi_hal_spi_bus_handle_subghz_ext;
furi_hal_subghz.cc1101_g0_pin = &gpio_cc1101_g0_ext;
} else {
furi_hal_subghz.spi_bus_handle = &furi_hal_spi_bus_handle_subghz;
furi_hal_subghz.cc1101_g0_pin = &gpio_cc1101_g0;
}
furi_hal_spi_bus_handle_init(furi_hal_subghz.spi_bus_handle);
furi_hal_subghz_init_check();
return true;
}
SubGhzRadioType furi_hal_subghz_get_radio_type(void) {
return furi_hal_subghz.radio_type;
}
void furi_hal_subghz_set_async_mirror_pin(const GpioPin* pin) {
furi_hal_subghz.async_mirror_pin = pin;
}
void furi_hal_subghz_init() {
void furi_hal_subghz_init(void) {
furi_hal_subghz_init_check();
}
void furi_hal_subghz_enable_ext_power(void) {
if(furi_hal_subghz.radio_type != SubGhzRadioInternal && !furi_hal_power_is_otg_enabled()) {
furi_hal_power_enable_otg();
}
}
void furi_hal_subghz_disable_ext_power(void) {
if(furi_hal_subghz.radio_type != SubGhzRadioInternal && !last_OTG_state) {
furi_hal_power_disable_otg();
}
}
bool furi_hal_subghz_check_radio(void) {
bool result = true;
furi_hal_subghz_enable_ext_power();
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
uint8_t ver = cc1101_get_version(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
if((ver != 0) && (ver != 255)) {
FURI_LOG_D(TAG, "Radio check ok");
} else {
FURI_LOG_D(TAG, "Radio check failed");
furi_hal_subghz_disable_ext_power();
result = false;
}
return result;
}
bool furi_hal_subghz_init_check(void) {
bool result = true;
furi_assert(furi_hal_subghz.state == SubGhzStateInit);
furi_hal_subghz.state = SubGhzStateIdle;
furi_hal_subghz.preset = FuriHalSubGhzPresetIDLE;
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
last_OTG_state = furi_hal_power_is_otg_enabled();
furi_hal_subghz_enable_ext_power();
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
#ifdef FURI_HAL_SUBGHZ_TX_GPIO
furi_hal_gpio_init(&FURI_HAL_SUBGHZ_TX_GPIO, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
#endif
// Reset
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_reset(&furi_hal_spi_bus_handle_subghz);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_reset(furi_hal_subghz.spi_bus_handle);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
// Prepare GD0 for power on self test
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
// GD0 low
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHW);
while(furi_hal_gpio_read(&gpio_cc1101_g0) != false)
;
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHW);
uint32_t test_start_time = furi_get_tick();
while(furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin) != false && result) {
if(furi_get_tick() - test_start_time > INIT_TIMEOUT) {
result = false;
}
}
// GD0 high
cc1101_write_reg(
&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHW | CC1101_IOCFG_INV);
while(furi_hal_gpio_read(&gpio_cc1101_g0) != true)
;
furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHW | CC1101_IOCFG_INV);
test_start_time = furi_get_tick();
while(furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin) != true && result) {
if(furi_get_tick() - test_start_time > INIT_TIMEOUT) {
result = false;
}
}
// Reset GD0 to floating state
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
// RF switches
furi_hal_gpio_init(&gpio_rf_sw_0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG2, CC1101IocfgHW);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW);
// Go to sleep
cc1101_shutdown(&furi_hal_spi_bus_handle_subghz);
cc1101_shutdown(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
if(result) {
FURI_LOG_I(TAG, "Init OK");
} else {
FURI_LOG_E(TAG, "Failed to initialization");
furi_hal_subghz_disable_ext_power();
}
return result;
}
void furi_hal_subghz_sleep() {
furi_assert(furi_hal_subghz.state == SubGhzStateIdle);
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_shutdown(&furi_hal_spi_bus_handle_subghz);
cc1101_shutdown(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
furi_hal_subghz_disable_ext_power();
furi_hal_subghz.preset = FuriHalSubGhzPresetIDLE;
}
void furi_hal_subghz_dump_state() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
printf(
"[furi_hal_subghz] cc1101 chip %d, version %d\r\n",
cc1101_get_partnumber(&furi_hal_spi_bus_handle_subghz),
cc1101_get_version(&furi_hal_spi_bus_handle_subghz));
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
cc1101_get_partnumber(furi_hal_subghz.spi_bus_handle),
cc1101_get_version(furi_hal_subghz.spi_bus_handle));
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_load_preset(FuriHalSubGhzPreset preset) {
@ -136,15 +211,15 @@ void furi_hal_subghz_load_preset(FuriHalSubGhzPreset preset) {
void furi_hal_subghz_load_custom_preset(uint8_t* preset_data) {
//load config
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_reset(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_reset(furi_hal_subghz.spi_bus_handle);
uint32_t i = 0;
uint8_t pa[8] = {0};
while(preset_data[i]) {
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, preset_data[i], preset_data[i + 1]);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, preset_data[i], preset_data[i + 1]);
i += 2;
}
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
//load pa table
memcpy(&pa[0], &preset_data[i + 2], 8);
@ -166,48 +241,48 @@ void furi_hal_subghz_load_custom_preset(uint8_t* preset_data) {
}
void furi_hal_subghz_load_registers(uint8_t* data) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_reset(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_reset(furi_hal_subghz.spi_bus_handle);
uint32_t i = 0;
while(data[i]) {
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, data[i], data[i + 1]);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, data[i], data[i + 1]);
i += 2;
}
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_load_patable(const uint8_t data[8]) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_set_pa_table(&furi_hal_spi_bus_handle_subghz, data);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_set_pa_table(furi_hal_subghz.spi_bus_handle, data);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_write_packet(const uint8_t* data, uint8_t size) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_flush_tx(&furi_hal_spi_bus_handle_subghz);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_FIFO, size);
cc1101_write_fifo(&furi_hal_spi_bus_handle_subghz, data, size);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_flush_tx(furi_hal_subghz.spi_bus_handle);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_FIFO, size);
cc1101_write_fifo(furi_hal_subghz.spi_bus_handle, data, size);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_flush_rx() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_flush_rx(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_flush_rx(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_flush_tx() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_flush_tx(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_flush_tx(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
bool furi_hal_subghz_rx_pipe_not_empty() {
CC1101RxBytes status[1];
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_read_reg(
&furi_hal_spi_bus_handle_subghz, (CC1101_STATUS_RXBYTES) | CC1101_BURST, (uint8_t*)status);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_subghz.spi_bus_handle, (CC1101_STATUS_RXBYTES) | CC1101_BURST, (uint8_t*)status);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
// TODO: you can add a buffer overflow flag if needed
if(status->NUM_RXBYTES > 0) {
return true;
@ -217,10 +292,10 @@ bool furi_hal_subghz_rx_pipe_not_empty() {
}
bool furi_hal_subghz_is_rx_data_crc_valid() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
uint8_t data[1];
cc1101_read_reg(&furi_hal_spi_bus_handle_subghz, CC1101_STATUS_LQI | CC1101_BURST, data);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
cc1101_read_reg(furi_hal_subghz.spi_bus_handle, CC1101_STATUS_LQI | CC1101_BURST, data);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
if(((data[0] >> 7) & 0x01)) {
return true;
} else {
@ -229,51 +304,52 @@ bool furi_hal_subghz_is_rx_data_crc_valid() {
}
void furi_hal_subghz_read_packet(uint8_t* data, uint8_t* size) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_read_fifo(&furi_hal_spi_bus_handle_subghz, data, size);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_read_fifo(furi_hal_subghz.spi_bus_handle, data, size);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_shutdown() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
// Reset and shutdown
cc1101_shutdown(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
cc1101_shutdown(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
furi_hal_subghz_disable_ext_power();
}
void furi_hal_subghz_reset() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
cc1101_reset(&furi_hal_spi_bus_handle_subghz);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
cc1101_reset(furi_hal_subghz.spi_bus_handle);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG0, CC1101IocfgHighImpedance);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_idle() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_idle(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_switch_to_idle(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
void furi_hal_subghz_rx() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_rx(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_switch_to_rx(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
bool furi_hal_subghz_tx() {
if(furi_hal_subghz.regulation != SubGhzRegulationTxRx) return false;
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
cc1101_switch_to_tx(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
cc1101_switch_to_tx(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
return true;
}
float furi_hal_subghz_get_rssi() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
int32_t rssi_dec = cc1101_get_rssi(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
int32_t rssi_dec = cc1101_get_rssi(furi_hal_subghz.spi_bus_handle);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
float rssi = rssi_dec;
if(rssi_dec >= 128) {
@ -286,10 +362,10 @@ float furi_hal_subghz_get_rssi() {
}
uint8_t furi_hal_subghz_get_lqi() {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
uint8_t data[1];
cc1101_read_reg(&furi_hal_spi_bus_handle_subghz, CC1101_STATUS_LQI | CC1101_BURST, data);
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
cc1101_read_reg(furi_hal_subghz.spi_bus_handle, CC1101_STATUS_LQI | CC1101_BURST, data);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
return data[0] & 0x7F;
}
@ -357,39 +433,39 @@ bool furi_hal_subghz_is_tx_allowed(uint32_t value) {
uint32_t furi_hal_subghz_set_frequency(uint32_t value) {
furi_hal_subghz.regulation = SubGhzRegulationTxRx;
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
uint32_t real_frequency = cc1101_set_frequency(&furi_hal_spi_bus_handle_subghz, value);
cc1101_calibrate(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
uint32_t real_frequency = cc1101_set_frequency(furi_hal_subghz.spi_bus_handle, value);
cc1101_calibrate(furi_hal_subghz.spi_bus_handle);
while(true) {
CC1101Status status = cc1101_get_status(&furi_hal_spi_bus_handle_subghz);
CC1101Status status = cc1101_get_status(furi_hal_subghz.spi_bus_handle);
if(status.STATE == CC1101StateIDLE) break;
}
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
return real_frequency;
}
void furi_hal_subghz_set_path(FuriHalSubGhzPath path) {
furi_hal_spi_acquire(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_acquire(furi_hal_subghz.spi_bus_handle);
if(path == FuriHalSubGhzPath433) {
furi_hal_gpio_write(&gpio_rf_sw_0, 0);
cc1101_write_reg(
&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
} else if(path == FuriHalSubGhzPath315) {
furi_hal_gpio_write(&gpio_rf_sw_0, 1);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG2, CC1101IocfgHW);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW);
} else if(path == FuriHalSubGhzPath868) {
furi_hal_gpio_write(&gpio_rf_sw_0, 1);
cc1101_write_reg(
&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
} else if(path == FuriHalSubGhzPathIsolate) {
furi_hal_gpio_write(&gpio_rf_sw_0, 0);
cc1101_write_reg(&furi_hal_spi_bus_handle_subghz, CC1101_IOCFG2, CC1101IocfgHW);
cc1101_write_reg(furi_hal_subghz.spi_bus_handle, CC1101_IOCFG2, CC1101IocfgHW);
} else {
furi_crash("SubGhz: Incorrect path during set.");
}
furi_hal_spi_release(&furi_hal_spi_bus_handle_subghz);
furi_hal_spi_release(furi_hal_subghz.spi_bus_handle);
}
static bool furi_hal_subghz_start_debug() {
@ -415,38 +491,29 @@ static bool furi_hal_subghz_stop_debug() {
return ret;
}
volatile uint32_t furi_hal_subghz_capture_delta_duration = 0;
volatile FuriHalSubGhzCaptureCallback furi_hal_subghz_capture_callback = NULL;
volatile void* furi_hal_subghz_capture_callback_context = NULL;
static void furi_hal_subghz_capture_ISR() {
// Channel 1
if(LL_TIM_IsActiveFlag_CC1(TIM2)) {
LL_TIM_ClearFlag_CC1(TIM2);
furi_hal_subghz_capture_delta_duration = LL_TIM_IC_GetCaptureCH1(TIM2);
if(!furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin)) {
if(furi_hal_subghz_capture_callback) {
if(furi_hal_subghz.async_mirror_pin != NULL)
furi_hal_gpio_write(furi_hal_subghz.async_mirror_pin, false);
furi_hal_subghz_capture_callback(
true,
furi_hal_subghz_capture_delta_duration,
(void*)furi_hal_subghz_capture_callback_context);
true, TIM2->CNT, (void*)furi_hal_subghz_capture_callback_context);
}
}
// Channel 2
if(LL_TIM_IsActiveFlag_CC2(TIM2)) {
LL_TIM_ClearFlag_CC2(TIM2);
} else {
if(furi_hal_subghz_capture_callback) {
if(furi_hal_subghz.async_mirror_pin != NULL)
furi_hal_gpio_write(furi_hal_subghz.async_mirror_pin, true);
furi_hal_subghz_capture_callback(
false,
LL_TIM_IC_GetCaptureCH2(TIM2) - furi_hal_subghz_capture_delta_duration,
(void*)furi_hal_subghz_capture_callback_context);
false, TIM2->CNT, (void*)furi_hal_subghz_capture_callback_context);
}
}
//Forced correction for improved accuracy
TIM2->CNT = 9;
}
void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void* context) {
@ -456,8 +523,13 @@ void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void*
furi_hal_subghz_capture_callback = callback;
furi_hal_subghz_capture_callback_context = context;
furi_hal_gpio_init_ex(
&gpio_cc1101_g0, GpioModeAltFunctionPushPull, GpioPullNo, GpioSpeedLow, GpioAltFn1TIM2);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeInterruptRiseFall, GpioPullUp, GpioSpeedVeryHigh);
furi_hal_gpio_add_int_callback(
furi_hal_subghz.cc1101_g0_pin,
furi_hal_subghz_capture_ISR,
furi_hal_subghz_capture_callback);
furi_hal_gpio_enable_int_callback(furi_hal_subghz.cc1101_g0_pin);
// Timer: base
LL_TIM_InitTypeDef TIM_InitStruct = {0};
@ -470,34 +542,9 @@ void furi_hal_subghz_start_async_rx(FuriHalSubGhzCaptureCallback callback, void*
// Timer: advanced
LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
LL_TIM_DisableARRPreload(TIM2);
LL_TIM_SetTriggerInput(TIM2, LL_TIM_TS_TI2FP2);
LL_TIM_SetSlaveMode(TIM2, LL_TIM_SLAVEMODE_RESET);
LL_TIM_SetTriggerOutput(TIM2, LL_TIM_TRGO_RESET);
LL_TIM_EnableMasterSlaveMode(TIM2);
LL_TIM_DisableDMAReq_TRIG(TIM2);
LL_TIM_DisableIT_TRIG(TIM2);
// Timer: channel 1 indirect
LL_TIM_IC_SetActiveInput(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_ACTIVEINPUT_INDIRECTTI);
LL_TIM_IC_SetPrescaler(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_ICPSC_DIV1);
LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_POLARITY_FALLING);
LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_FILTER_FDIV1);
// Timer: channel 2 direct
LL_TIM_IC_SetActiveInput(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_ACTIVEINPUT_DIRECTTI);
LL_TIM_IC_SetPrescaler(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_ICPSC_DIV1);
LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_POLARITY_RISING);
LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_FILTER_FDIV32_N8);
// ISR setup
furi_hal_interrupt_set_isr(FuriHalInterruptIdTIM2, furi_hal_subghz_capture_ISR, NULL);
// Interrupts and channels
LL_TIM_EnableIT_CC1(TIM2);
LL_TIM_EnableIT_CC2(TIM2);
LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH1);
LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH2);
// Start timer
LL_TIM_SetCounter(TIM2, 0);
LL_TIM_EnableCounter(TIM2);
@ -523,9 +570,8 @@ void furi_hal_subghz_stop_async_rx() {
furi_hal_subghz_stop_debug();
FURI_CRITICAL_EXIT();
furi_hal_interrupt_set_isr(FuriHalInterruptIdTIM2, NULL, NULL);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
}
typedef struct {
@ -624,7 +670,8 @@ static void furi_hal_subghz_async_tx_timer_isr() {
} else if(furi_hal_subghz.state == SubGhzStateAsyncTxLast) {
furi_hal_subghz.state = SubGhzStateAsyncTxEnd;
//forcibly pulls the pin to the ground so that there is no carrier
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullDown, GpioSpeedLow);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullDown, GpioSpeedLow);
LL_TIM_DisableCounter(TIM2);
} else {
furi_crash(NULL);
@ -651,9 +698,9 @@ bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void*
furi_hal_subghz_async_tx.buffer =
malloc(API_HAL_SUBGHZ_ASYNC_TX_BUFFER_FULL * sizeof(uint32_t));
// Connect CC1101_GD0 to TIM2 as output
furi_hal_gpio_init_ex(
&gpio_cc1101_g0, GpioModeAltFunctionPushPull, GpioPullDown, GpioSpeedLow, GpioAltFn1TIM2);
furi_hal_gpio_write(furi_hal_subghz.cc1101_g0_pin, true);
furi_hal_gpio_init(
furi_hal_subghz.cc1101_g0_pin, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh);
// Configure DMA
LL_DMA_InitTypeDef dma_config = {0};
@ -713,9 +760,8 @@ bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void*
LL_TIM_SetCounter(TIM2, 0);
LL_TIM_EnableCounter(TIM2);
// Start debug
if(furi_hal_subghz_start_debug()) {
const GpioPin* gpio = furi_hal_subghz.async_mirror_pin;
//Signal generation for external G0
const GpioPin* gpio = furi_hal_subghz.cc1101_g0_pin;
furi_hal_subghz_debug_gpio_buff[0] = (uint32_t)gpio->pin << GPIO_NUMBER;
furi_hal_subghz_debug_gpio_buff[1] = gpio->pin;
@ -733,7 +779,6 @@ bool furi_hal_subghz_start_async_tx(FuriHalSubGhzAsyncTxCallback callback, void*
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_2, &dma_config);
LL_DMA_SetDataLength(DMA1, LL_DMA_CHANNEL_2, 2);
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_2);
}
return true;
}
@ -765,7 +810,7 @@ void furi_hal_subghz_stop_async_tx() {
furi_hal_interrupt_set_isr(FuriHalInterruptIdDma1Ch1, NULL, NULL);
// Deinitialize GPIO
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
// Stop debug
if(furi_hal_subghz_stop_debug()) {

View File

@ -10,6 +10,7 @@
#include <stddef.h>
#include <toolbox/level_duration.h>
#include <furi_hal_gpio.h>
#include <furi_hal_spi_types.h>
#ifdef __cplusplus
extern "C" {
@ -61,6 +62,25 @@ typedef enum {
SubGhzRegulationTxRx, /**TxRx*/
} SubGhzRegulation;
/** SubGhz radio types */
typedef enum {
SubGhzRadioInternal,
SubGhzRadioExternal,
} SubGhzRadioType;
/** Structure for accessing SubGhz settings*/
typedef struct {
volatile SubGhzState state;
volatile SubGhzRegulation regulation;
volatile FuriHalSubGhzPreset preset;
const GpioPin* async_mirror_pin;
SubGhzRadioType radio_type;
FuriHalSpiBusHandle* spi_bus_handle;
const GpioPin* cc1101_g0_pin;
} FuriHalSubGhz;
extern volatile FuriHalSubGhz furi_hal_subghz;
/* Mirror RX/TX async modulation signal to specified pin
*
* @warning Configures pin to output mode. Make sure it is not connected
@ -76,6 +96,13 @@ void furi_hal_subghz_set_async_mirror_pin(const GpioPin* pin);
*/
void furi_hal_subghz_init();
/** Initialize and switch to power save mode Used by internal API-HAL
* initialization routine Can be used to reinitialize device to safe state and
* send it to sleep
* @return true if initialisation is successfully
*/
bool furi_hal_subghz_init_check(void);
/** Send device to sleep mode
*/
void furi_hal_subghz_sleep();
@ -258,6 +285,30 @@ bool furi_hal_subghz_is_async_tx_complete();
*/
void furi_hal_subghz_stop_async_tx();
/** Switching between internal and external radio
* @param state SubGhzRadioInternal or SubGhzRadioExternal
* @return true if switching is successful
*/
bool furi_hal_subghz_set_radio_type(SubGhzRadioType state);
/** Get current radio
* @return SubGhzRadioInternal or SubGhzRadioExternal
*/
SubGhzRadioType furi_hal_subghz_get_radio_type(void);
/** Check for a radio module
* @return true if check is successful
*/
bool furi_hal_subghz_check_radio(void);
/** Turn on the power of the external radio module
*/
void furi_hal_subghz_enable_ext_power(void);
/** Turn off the power of the external radio module
*/
void furi_hal_subghz_disable_ext_power(void);
#ifdef __cplusplus
}
#endif

View File

@ -70,7 +70,7 @@ bool subghz_tx_rx_worker_rx(SubGhzTxRxWorker* instance, uint8_t* data, uint8_t*
furi_delay_tick(1);
}
//waiting for reception to complete
while(furi_hal_gpio_read(&gpio_cc1101_g0)) {
while(furi_hal_gpio_read(furi_hal_subghz.cc1101_g0_pin)) {
furi_delay_tick(1);
if(!--timeout) {
FURI_LOG_W(TAG, "RX cc1101_g0 timeout");
@ -104,14 +104,16 @@ void subghz_tx_rx_worker_tx(SubGhzTxRxWorker* instance, uint8_t* data, size_t si
furi_hal_subghz_write_packet(data, size);
furi_hal_subghz_tx(); //start send
instance->status = SubGhzTxRxWorkerStatusTx;
while(!furi_hal_gpio_read(&gpio_cc1101_g0)) { // Wait for GDO0 to be set -> sync transmitted
while(!furi_hal_gpio_read(
furi_hal_subghz.cc1101_g0_pin)) { // Wait for GDO0 to be set -> sync transmitted
furi_delay_tick(1);
if(!--timeout) {
FURI_LOG_W(TAG, "TX !cc1101_g0 timeout");
break;
}
}
while(furi_hal_gpio_read(&gpio_cc1101_g0)) { // Wait for GDO0 to be cleared -> end of packet
while(furi_hal_gpio_read(
furi_hal_subghz.cc1101_g0_pin)) { // Wait for GDO0 to be cleared -> end of packet
furi_delay_tick(1);
if(!--timeout) {
FURI_LOG_W(TAG, "TX cc1101_g0 timeout");
@ -134,7 +136,7 @@ static int32_t subghz_tx_rx_worker_thread(void* context) {
furi_hal_subghz_idle();
furi_hal_subghz_load_preset(FuriHalSubGhzPresetGFSK9_99KbAsync);
//furi_hal_subghz_load_preset(FuriHalSubGhzPresetMSK99_97KbAsync);
furi_hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(furi_hal_subghz.cc1101_g0_pin, GpioModeInput, GpioPullNo, GpioSpeedLow);
furi_hal_subghz_set_frequency_and_path(instance->frequency);
furi_hal_subghz_flush_rx();