mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-22 21:01:40 +03:00
Firmware, Bootloader: add f3 target. (#215)
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
This commit is contained in:
parent
bce6f867f1
commit
76e3fd3060
33
.github/workflows/ci.yml
vendored
33
.github/workflows/ci.yml
vendored
@ -71,6 +71,39 @@ jobs:
|
|||||||
firmware/.obj/f2/firmware.hex
|
firmware/.obj/f2/firmware.hex
|
||||||
if-no-files-found: error
|
if-no-files-found: error
|
||||||
retention-days: 7
|
retention-days: 7
|
||||||
|
|
||||||
|
- name: Build F3 bootloader in docker
|
||||||
|
uses: ./.github/actions/docker
|
||||||
|
with:
|
||||||
|
run: make -C bootloader TARGET=f3
|
||||||
|
|
||||||
|
- name: Publish F3 bootloader artifacts
|
||||||
|
uses: actions/upload-artifact@v2
|
||||||
|
with:
|
||||||
|
name: bootloader_f3
|
||||||
|
path: |
|
||||||
|
bootloader/.obj/f3/bootloader.elf
|
||||||
|
bootloader/.obj/f3/bootloader.bin
|
||||||
|
bootloader/.obj/f3/bootloader.hex
|
||||||
|
if-no-files-found: error
|
||||||
|
retention-days: 7
|
||||||
|
|
||||||
|
- name: Build F3 firmware in docker
|
||||||
|
uses: ./.github/actions/docker
|
||||||
|
with:
|
||||||
|
run: make -C firmware TARGET=f3 APP_RELEASE=1
|
||||||
|
|
||||||
|
- name: Publish F3 firmware artifacts
|
||||||
|
uses: actions/upload-artifact@v2
|
||||||
|
with:
|
||||||
|
name: firmware_f3
|
||||||
|
path: |
|
||||||
|
firmware/.obj/f3/firmware.elf
|
||||||
|
firmware/.obj/f3/firmware.bin
|
||||||
|
firmware/.obj/f3/firmware.hex
|
||||||
|
if-no-files-found: error
|
||||||
|
retention-days: 7
|
||||||
|
|
||||||
upload:
|
upload:
|
||||||
name: Upload artifacts to external storage
|
name: Upload artifacts to external storage
|
||||||
needs: build
|
needs: build
|
||||||
|
3
.gitmodules
vendored
3
.gitmodules
vendored
@ -4,3 +4,6 @@
|
|||||||
[submodule "lib/mlib"]
|
[submodule "lib/mlib"]
|
||||||
path = lib/mlib
|
path = lib/mlib
|
||||||
url = https://github.com/P-p-H-d/mlib.git
|
url = https://github.com/P-p-H-d/mlib.git
|
||||||
|
[submodule "lib/STM32CubeWB"]
|
||||||
|
path = lib/STM32CubeWB
|
||||||
|
url = https://github.com/STMicroelectronics/STM32CubeWB.git
|
||||||
|
187
bootloader/targets/f3/stm32wb55xx_flash_cm4.ld
Normal file
187
bootloader/targets/f3/stm32wb55xx_flash_cm4.ld
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/**
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** File : stm32wb55xx_flash_cm4.ld
|
||||||
|
**
|
||||||
|
** Abstract : System Workbench Minimal System calls file
|
||||||
|
**
|
||||||
|
** For more information about which c-functions
|
||||||
|
** need which of these lowlevel functions
|
||||||
|
** please consult the Newlib libc-manual
|
||||||
|
**
|
||||||
|
** Environment : System Workbench for MCU
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed “as is,” without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20030000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||||
|
RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFFC
|
||||||
|
RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM1 AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM1
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED
|
||||||
|
MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED
|
||||||
|
MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED
|
||||||
|
}
|
||||||
|
|
||||||
|
|
160
bootloader/targets/f3/target.c
Normal file
160
bootloader/targets/f3/target.c
Normal file
@ -0,0 +1,160 @@
|
|||||||
|
#include <target.h>
|
||||||
|
#include <stm32wbxx.h>
|
||||||
|
#include <stm32wbxx_ll_system.h>
|
||||||
|
#include <stm32wbxx_ll_bus.h>
|
||||||
|
#include <stm32wbxx_ll_utils.h>
|
||||||
|
#include <stm32wbxx_ll_rcc.h>
|
||||||
|
#include <stm32wbxx_ll_rtc.h>
|
||||||
|
#include <stm32wbxx_ll_pwr.h>
|
||||||
|
#include <stm32wbxx_ll_gpio.h>
|
||||||
|
|
||||||
|
// Boot request enum
|
||||||
|
#define BOOT_REQUEST_NONE 0x00000000
|
||||||
|
#define BOOT_REQUEST_DFU 0xDF00B000
|
||||||
|
// Boot to DFU pin
|
||||||
|
#define BOOT_DFU_PORT GPIOB
|
||||||
|
#define BOOT_DFU_PIN LL_GPIO_PIN_12
|
||||||
|
// LCD backlight
|
||||||
|
#define BOOT_LCD_BL_PORT GPIOA
|
||||||
|
#define BOOT_LCD_BL_PIN LL_GPIO_PIN_15
|
||||||
|
// LEDs
|
||||||
|
#define LED_RED_PORT GPIOA
|
||||||
|
#define LED_RED_PIN LL_GPIO_PIN_1
|
||||||
|
#define LED_GREEN_PORT GPIOA
|
||||||
|
#define LED_GREEN_PIN LL_GPIO_PIN_2
|
||||||
|
#define LED_BLUE_PORT GPIOA
|
||||||
|
#define LED_BLUE_PIN LL_GPIO_PIN_3
|
||||||
|
// USB pins
|
||||||
|
#define BOOT_USB_PORT GPIOA
|
||||||
|
#define BOOT_USB_DM_PIN LL_GPIO_PIN_11
|
||||||
|
#define BOOT_USB_DP_PIN LL_GPIO_PIN_12
|
||||||
|
#define BOOT_USB_PIN (BOOT_USB_DM_PIN | BOOT_USB_DP_PIN)
|
||||||
|
|
||||||
|
void clock_init() {
|
||||||
|
LL_FLASH_SetLatency(LL_FLASH_LATENCY_3);
|
||||||
|
LL_RCC_MSI_Enable();
|
||||||
|
while(LL_RCC_MSI_IsReady() != 1) {
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Main PLL configuration and activation */
|
||||||
|
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, LL_RCC_PLLM_DIV_1, 32, LL_RCC_PLLR_DIV_2);
|
||||||
|
LL_RCC_PLL_Enable();
|
||||||
|
LL_RCC_PLL_EnableDomain_SYS();
|
||||||
|
while(LL_RCC_PLL_IsReady() != 1) {
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Sysclk activation on the main PLL */
|
||||||
|
/* Set CPU1 prescaler*/
|
||||||
|
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
|
||||||
|
|
||||||
|
/* Set CPU2 prescaler*/
|
||||||
|
LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_2);
|
||||||
|
|
||||||
|
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
|
||||||
|
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) {
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Set AHB SHARED prescaler*/
|
||||||
|
LL_RCC_SetAHB4Prescaler(LL_RCC_SYSCLK_DIV_1);
|
||||||
|
|
||||||
|
/* Set APB1 prescaler*/
|
||||||
|
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
|
||||||
|
|
||||||
|
/* Set APB2 prescaler*/
|
||||||
|
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
|
||||||
|
|
||||||
|
LL_Init1msTick(64000000);
|
||||||
|
|
||||||
|
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
|
||||||
|
LL_SetSystemCoreClock(64000000);
|
||||||
|
}
|
||||||
|
|
||||||
|
void gpio_init() {
|
||||||
|
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
|
||||||
|
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB);
|
||||||
|
// USB D+
|
||||||
|
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_MODE_OUTPUT);
|
||||||
|
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
|
||||||
|
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||||
|
// USB D-
|
||||||
|
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_MODE_OUTPUT);
|
||||||
|
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
|
||||||
|
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||||
|
// Button: back
|
||||||
|
LL_GPIO_SetPinMode(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_MODE_INPUT);
|
||||||
|
LL_GPIO_SetPinPull(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_PULL_UP);
|
||||||
|
// Display backlight
|
||||||
|
LL_GPIO_SetPinMode(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_MODE_OUTPUT);
|
||||||
|
LL_GPIO_SetPinSpeed(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_SPEED_FREQ_LOW);
|
||||||
|
LL_GPIO_SetPinOutputType(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_OUTPUT_PUSHPULL);
|
||||||
|
// LEDs
|
||||||
|
LL_GPIO_SetPinMode(LED_RED_PORT, LED_RED_PIN, LL_GPIO_MODE_OUTPUT);
|
||||||
|
LL_GPIO_SetPinOutputType(LED_RED_PORT, LED_RED_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||||
|
LL_GPIO_SetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
||||||
|
LL_GPIO_SetPinMode(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_MODE_OUTPUT);
|
||||||
|
LL_GPIO_SetPinOutputType(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||||
|
LL_GPIO_SetOutputPin(LED_GREEN_PORT, LED_GREEN_PIN);
|
||||||
|
LL_GPIO_SetPinMode(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_MODE_OUTPUT);
|
||||||
|
LL_GPIO_SetPinOutputType(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
|
||||||
|
LL_GPIO_SetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
||||||
|
}
|
||||||
|
|
||||||
|
void rtc_init() {
|
||||||
|
LL_RCC_EnableRTC();
|
||||||
|
LL_APB2_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
|
||||||
|
LL_PWR_EnableBkUpAccess();
|
||||||
|
}
|
||||||
|
|
||||||
|
void lcd_backlight_on() {
|
||||||
|
LL_GPIO_SetOutputPin(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN);
|
||||||
|
}
|
||||||
|
|
||||||
|
void usb_wire_reset() {
|
||||||
|
LL_GPIO_ResetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
|
||||||
|
LL_mDelay(10);
|
||||||
|
LL_GPIO_SetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
|
||||||
|
}
|
||||||
|
|
||||||
|
void target_init() {
|
||||||
|
clock_init();
|
||||||
|
rtc_init();
|
||||||
|
gpio_init();
|
||||||
|
|
||||||
|
usb_wire_reset();
|
||||||
|
}
|
||||||
|
|
||||||
|
int target_is_dfu_requested() {
|
||||||
|
if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_DFU) {
|
||||||
|
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_NONE);
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
if(!LL_GPIO_IsInputPinSet(BOOT_DFU_PORT, BOOT_DFU_PIN)) {
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void target_switch(void* offset) {
|
||||||
|
asm volatile("ldr r3, [%0] \n"
|
||||||
|
"msr msp, r3 \n"
|
||||||
|
"ldr r3, [%1] \n"
|
||||||
|
"mov pc, r3 \n"
|
||||||
|
:
|
||||||
|
: "r"(offset), "r"(offset + 0x4)
|
||||||
|
: "r3");
|
||||||
|
}
|
||||||
|
|
||||||
|
void target_switch2dfu() {
|
||||||
|
LL_GPIO_ResetOutputPin(LED_BLUE_PORT, LED_BLUE_PIN);
|
||||||
|
// Remap memory to system bootloader
|
||||||
|
LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SYSTEMFLASH);
|
||||||
|
target_switch(0x0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void target_switch2os() {
|
||||||
|
LL_GPIO_ResetOutputPin(LED_RED_PORT, LED_RED_PIN);
|
||||||
|
SCB->VTOR = BOOT_ADDRESS + OS_OFFSET;
|
||||||
|
target_switch((void*)(BOOT_ADDRESS + OS_OFFSET));
|
||||||
|
}
|
28
bootloader/targets/f3/target.mk
Normal file
28
bootloader/targets/f3/target.mk
Normal file
@ -0,0 +1,28 @@
|
|||||||
|
TOOLCHAIN = arm
|
||||||
|
|
||||||
|
BOOT_ADDRESS = 0x08000000
|
||||||
|
FW_ADDRESS = 0x08008000
|
||||||
|
OS_OFFSET = 0x00008000
|
||||||
|
FLASH_ADDRESS = 0x08000000
|
||||||
|
|
||||||
|
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
|
||||||
|
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||||
|
|
||||||
|
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32WB55xx -Wall -fdata-sections -ffunction-sections
|
||||||
|
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs
|
||||||
|
|
||||||
|
CUBE_DIR = ../lib/STM32CubeWB
|
||||||
|
|
||||||
|
ASM_SOURCES += $(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s
|
||||||
|
C_SOURCES += $(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c
|
||||||
|
C_SOURCES += $(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c
|
||||||
|
|
||||||
|
CFLAGS += -I$(CUBE_DIR)/Drivers/CMSIS/Include
|
||||||
|
CFLAGS += -I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include
|
||||||
|
CFLAGS += -I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc
|
||||||
|
|
||||||
|
LDFLAGS += -Ttargets/f3/stm32wb55xx_flash_cm4.ld
|
||||||
|
|
||||||
|
ASM_SOURCES += $(wildcard $(TARGET_DIR)/*.s)
|
||||||
|
C_SOURCES += $(wildcard $(TARGET_DIR)/*.c)
|
||||||
|
CPP_SOURCES += $(wildcard $(TARGET_DIR)/*.cpp)
|
105
debug/stm32wbx.cfg
Normal file
105
debug/stm32wbx.cfg
Normal file
@ -0,0 +1,105 @@
|
|||||||
|
# script for stm32wbx family
|
||||||
|
|
||||||
|
gdb_port 4242
|
||||||
|
|
||||||
|
#
|
||||||
|
# stm32wb devices support both JTAG and SWD transports.
|
||||||
|
#
|
||||||
|
source [find target/swj-dp.tcl]
|
||||||
|
source [find mem_helper.tcl]
|
||||||
|
|
||||||
|
if { [info exists CHIPNAME] } {
|
||||||
|
set _CHIPNAME $CHIPNAME
|
||||||
|
} else {
|
||||||
|
set _CHIPNAME stm32wbx
|
||||||
|
}
|
||||||
|
|
||||||
|
set _ENDIAN little
|
||||||
|
|
||||||
|
# Work-area is a space in RAM used for flash programming
|
||||||
|
# By default use 64kB
|
||||||
|
if { [info exists WORKAREASIZE] } {
|
||||||
|
set _WORKAREASIZE $WORKAREASIZE
|
||||||
|
} else {
|
||||||
|
set _WORKAREASIZE 0x10000
|
||||||
|
}
|
||||||
|
|
||||||
|
#jtag scan chain
|
||||||
|
if { [info exists CPUTAPID] } {
|
||||||
|
set _CPUTAPID $CPUTAPID
|
||||||
|
} else {
|
||||||
|
if { [using_jtag] } {
|
||||||
|
set _CPUTAPID 0x6ba00477
|
||||||
|
} else {
|
||||||
|
# SWD IDCODE (single drop, arm)
|
||||||
|
set _CPUTAPID 0x6ba02477
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
||||||
|
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
|
||||||
|
|
||||||
|
if {[using_jtag]} {
|
||||||
|
jtag newtap $_CHIPNAME bs -irlen 5
|
||||||
|
}
|
||||||
|
|
||||||
|
set _TARGETNAME $_CHIPNAME.cpu
|
||||||
|
target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
|
||||||
|
|
||||||
|
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
||||||
|
|
||||||
|
set _FLASHNAME $_CHIPNAME.flash
|
||||||
|
flash bank $_FLASHNAME stm32l4x 0 0 0 0 $_TARGETNAME
|
||||||
|
|
||||||
|
# Common knowledges tells JTAG speed should be <= F_CPU/6.
|
||||||
|
# F_CPU after reset is MSI 4MHz, so use F_JTAG = 500 kHz to stay on
|
||||||
|
# the safe side.
|
||||||
|
#
|
||||||
|
# Note that there is a pretty wide band where things are
|
||||||
|
# more or less stable, see http://openocd.zylin.com/#/c/3366/
|
||||||
|
adapter speed 500
|
||||||
|
|
||||||
|
adapter srst delay 100
|
||||||
|
if {[using_jtag]} {
|
||||||
|
jtag_ntrst_delay 100
|
||||||
|
}
|
||||||
|
|
||||||
|
reset_config srst_nogate
|
||||||
|
|
||||||
|
if {![using_hla]} {
|
||||||
|
# if srst is not fitted use SYSRESETREQ to
|
||||||
|
# perform a soft reset
|
||||||
|
cortex_m reset_config sysresetreq
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event reset-init {
|
||||||
|
# CPU comes out of reset with MSI_ON | MSI_RDY | MSI Range 4 MHz.
|
||||||
|
# Configure system to use MSI 24 MHz clock, compliant with VOS default Range1.
|
||||||
|
# 2 WS compliant with VOS=Range1 and 24 MHz.
|
||||||
|
mmw 0x58004000 0x00000102 0 ;# FLASH_ACR |= PRFTBE | 2(Latency)
|
||||||
|
mmw 0x58000000 0x00000091 0 ;# RCC_CR = MSI_ON | MSI Range 24 MHz
|
||||||
|
# Boost JTAG frequency
|
||||||
|
adapter speed 4000
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event reset-start {
|
||||||
|
# Reset clock is MSI (4 MHz)
|
||||||
|
adapter speed 500
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event examine-end {
|
||||||
|
# Enable debug during low power modes (uses more power)
|
||||||
|
# DBGMCU_CR |= DBG_STANDBY | DBG_STOP | DBG_SLEEP
|
||||||
|
mmw 0xE0042004 0x00000007 0
|
||||||
|
|
||||||
|
# Stop watchdog counters during halt
|
||||||
|
# DBGMCU_APB1_FZR1 |= DBG_IWDG_STOP | DBG_WWDG_STOP
|
||||||
|
mmw 0xE004203C 0x00001800 0
|
||||||
|
}
|
||||||
|
|
||||||
|
$_TARGETNAME configure -event trace-config {
|
||||||
|
# Set TRACE_IOEN; TRACE_MODE is set to async; when using sync
|
||||||
|
# change this value accordingly to configure trace pins
|
||||||
|
# assignment
|
||||||
|
mmw 0xE0042004 0x00000020 0
|
||||||
|
}
|
172
firmware/targets/f3/Inc/FreeRTOSConfig.h
Normal file
172
firmware/targets/f3/Inc/FreeRTOSConfig.h
Normal file
@ -0,0 +1,172 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/*
|
||||||
|
* FreeRTOS Kernel V10.2.1
|
||||||
|
* Portion Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
|
||||||
|
* Portion Copyright (C) 2019 StMicroelectronics, Inc. All Rights Reserved.
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy of
|
||||||
|
* this software and associated documentation files (the "Software"), to deal in
|
||||||
|
* the Software without restriction, including without limitation the rights to
|
||||||
|
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
|
||||||
|
* the Software, and to permit persons to whom the Software is furnished to do so,
|
||||||
|
* subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in all
|
||||||
|
* copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
|
||||||
|
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
|
||||||
|
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
||||||
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* http://www.FreeRTOS.org
|
||||||
|
* http://aws.amazon.com/freertos
|
||||||
|
*
|
||||||
|
* 1 tab == 4 spaces!
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
#ifndef FREERTOS_CONFIG_H
|
||||||
|
#define FREERTOS_CONFIG_H
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------
|
||||||
|
* Application specific definitions.
|
||||||
|
*
|
||||||
|
* These definitions should be adjusted for your particular hardware and
|
||||||
|
* application requirements.
|
||||||
|
*
|
||||||
|
* These parameters and more are described within the 'configuration' section of the
|
||||||
|
* FreeRTOS API documentation available on the FreeRTOS.org web site.
|
||||||
|
*
|
||||||
|
* See http://www.freertos.org/a00110.html
|
||||||
|
*----------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
/* Section where include file can be added */
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Ensure definitions are only used by the compiler, and not by the assembler. */
|
||||||
|
#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
|
||||||
|
#include <stdint.h>
|
||||||
|
extern uint32_t SystemCoreClock;
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
extern void configureTimerForRunTimeStats(void);
|
||||||
|
extern unsigned long getRunTimeCounterValue(void);
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
#endif
|
||||||
|
#define configENABLE_FPU 1
|
||||||
|
#define configENABLE_MPU 0
|
||||||
|
|
||||||
|
#define configUSE_PREEMPTION 1
|
||||||
|
#define configSUPPORT_STATIC_ALLOCATION 1
|
||||||
|
#define configSUPPORT_DYNAMIC_ALLOCATION 1
|
||||||
|
#define configUSE_IDLE_HOOK 1
|
||||||
|
#define configUSE_TICK_HOOK 0
|
||||||
|
#define configCPU_CLOCK_HZ ( SystemCoreClock )
|
||||||
|
#define configTICK_RATE_HZ ((TickType_t)1000)
|
||||||
|
#define configMAX_PRIORITIES ( 56 )
|
||||||
|
#define configMINIMAL_STACK_SIZE ((uint16_t)128)
|
||||||
|
#define configTOTAL_HEAP_SIZE ((size_t)40960)
|
||||||
|
#define configMAX_TASK_NAME_LEN ( 16 )
|
||||||
|
#define configGENERATE_RUN_TIME_STATS 1
|
||||||
|
#define configUSE_TRACE_FACILITY 1
|
||||||
|
#define configUSE_16_BIT_TICKS 0
|
||||||
|
#define configUSE_MUTEXES 1
|
||||||
|
#define configQUEUE_REGISTRY_SIZE 8
|
||||||
|
#define configCHECK_FOR_STACK_OVERFLOW 1
|
||||||
|
#define configUSE_RECURSIVE_MUTEXES 1
|
||||||
|
#define configUSE_COUNTING_SEMAPHORES 1
|
||||||
|
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
|
||||||
|
#define configRECORD_STACK_HIGH_ADDRESS 1
|
||||||
|
/* USER CODE BEGIN MESSAGE_BUFFER_LENGTH_TYPE */
|
||||||
|
/* Defaults to size_t for backward compatibility, but can be changed
|
||||||
|
if lengths will always be less than the number of bytes in a size_t. */
|
||||||
|
#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
|
||||||
|
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 1
|
||||||
|
/* USER CODE END MESSAGE_BUFFER_LENGTH_TYPE */
|
||||||
|
|
||||||
|
/* Co-routine definitions. */
|
||||||
|
#define configUSE_CO_ROUTINES 0
|
||||||
|
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
|
||||||
|
|
||||||
|
/* Software timer definitions. */
|
||||||
|
#define configUSE_TIMERS 1
|
||||||
|
#define configTIMER_TASK_PRIORITY ( 2 )
|
||||||
|
#define configTIMER_QUEUE_LENGTH 10
|
||||||
|
#define configTIMER_TASK_STACK_DEPTH 256
|
||||||
|
|
||||||
|
/* Set the following definitions to 1 to include the API function, or zero
|
||||||
|
to exclude the API function. */
|
||||||
|
#define INCLUDE_vTaskPrioritySet 1
|
||||||
|
#define INCLUDE_uxTaskPriorityGet 1
|
||||||
|
#define INCLUDE_vTaskDelete 1
|
||||||
|
#define INCLUDE_vTaskCleanUpResources 0
|
||||||
|
#define INCLUDE_vTaskSuspend 1
|
||||||
|
#define INCLUDE_vTaskDelayUntil 1
|
||||||
|
#define INCLUDE_vTaskDelay 1
|
||||||
|
#define INCLUDE_xTaskGetSchedulerState 1
|
||||||
|
#define INCLUDE_xTimerPendFunctionCall 1
|
||||||
|
#define INCLUDE_xQueueGetMutexHolder 1
|
||||||
|
#define INCLUDE_uxTaskGetStackHighWaterMark 1
|
||||||
|
#define INCLUDE_eTaskGetState 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used
|
||||||
|
* by the application thus the correct define need to be enabled below
|
||||||
|
*/
|
||||||
|
#define USE_FreeRTOS_HEAP_4
|
||||||
|
|
||||||
|
/* Cortex-M specific definitions. */
|
||||||
|
#ifdef __NVIC_PRIO_BITS
|
||||||
|
/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
|
||||||
|
#define configPRIO_BITS __NVIC_PRIO_BITS
|
||||||
|
#else
|
||||||
|
#define configPRIO_BITS 4
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* The lowest interrupt priority that can be used in a call to a "set priority"
|
||||||
|
function. */
|
||||||
|
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15
|
||||||
|
|
||||||
|
/* The highest interrupt priority that can be used by any interrupt service
|
||||||
|
routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
|
||||||
|
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
|
||||||
|
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
|
||||||
|
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
|
||||||
|
|
||||||
|
/* Interrupt priorities used by the kernel port layer itself. These are generic
|
||||||
|
to all Cortex-M ports, and do not rely on any particular library functions. */
|
||||||
|
#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||||
|
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
|
||||||
|
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
|
||||||
|
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
|
||||||
|
|
||||||
|
/* Normal assert() semantics without relying on the provision of an assert.h
|
||||||
|
header file. */
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
#define configASSERT( x ) if ((x) == 0) {taskDISABLE_INTERRUPTS(); for( ;; );}
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
|
||||||
|
standard names. */
|
||||||
|
#define vPortSVCHandler SVC_Handler
|
||||||
|
#define xPortPendSVHandler PendSV_Handler
|
||||||
|
|
||||||
|
/* IMPORTANT: This define is commented when used with STM32Cube firmware, when the timebase source is SysTick,
|
||||||
|
to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
|
||||||
|
|
||||||
|
#define xPortSysTickHandler SysTick_Handler
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
/* Definitions needed when configGENERATE_RUN_TIME_STATS is on */
|
||||||
|
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS configureTimerForRunTimeStats
|
||||||
|
#define portGET_RUN_TIME_COUNTER_VALUE getRunTimeCounterValue
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Defines */
|
||||||
|
/* Section where parameter definitions can be added (for instance, to override default ones in FreeRTOS.h) */
|
||||||
|
/* USER CODE END Defines */
|
||||||
|
|
||||||
|
#endif /* FREERTOS_CONFIG_H */
|
58
firmware/targets/f3/Inc/adc.h
Normal file
58
firmware/targets/f3/Inc/adc.h
Normal file
@ -0,0 +1,58 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : ADC.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the ADC instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __adc_H
|
||||||
|
#define __adc_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern ADC_HandleTypeDef hadc1;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_ADC1_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ adc_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
58
firmware/targets/f3/Inc/comp.h
Normal file
58
firmware/targets/f3/Inc/comp.h
Normal file
@ -0,0 +1,58 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : COMP.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the COMP instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __comp_H
|
||||||
|
#define __comp_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern COMP_HandleTypeDef hcomp1;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_COMP1_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ comp_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
57
firmware/targets/f3/Inc/gpio.h
Normal file
57
firmware/targets/f3/Inc/gpio.h
Normal file
@ -0,0 +1,57 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : gpio.h
|
||||||
|
* Description : This file contains all the functions prototypes for
|
||||||
|
* the gpio
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __gpio_H
|
||||||
|
#define __gpio_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_GPIO_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ pinoutConfig_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
58
firmware/targets/f3/Inc/i2c.h
Normal file
58
firmware/targets/f3/Inc/i2c.h
Normal file
@ -0,0 +1,58 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : I2C.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the I2C instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __i2c_H
|
||||||
|
#define __i2c_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern I2C_HandleTypeDef hi2c1;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_I2C1_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ i2c_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
190
firmware/targets/f3/Inc/main.h
Normal file
190
firmware/targets/f3/Inc/main.h
Normal file
@ -0,0 +1,190 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : main.h
|
||||||
|
* @brief : Header for main.c file.
|
||||||
|
* This file contains the common defines of the application.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __MAIN_H
|
||||||
|
#define __MAIN_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32wbxx_hal.h"
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN ET */
|
||||||
|
|
||||||
|
/* USER CODE END ET */
|
||||||
|
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EC */
|
||||||
|
|
||||||
|
/* USER CODE END EC */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EM */
|
||||||
|
|
||||||
|
/* USER CODE END EM */
|
||||||
|
|
||||||
|
/* Exported functions prototypes ---------------------------------------------*/
|
||||||
|
void Error_Handler(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EFP */
|
||||||
|
|
||||||
|
/* USER CODE END EFP */
|
||||||
|
|
||||||
|
/* Private defines -----------------------------------------------------------*/
|
||||||
|
#define BUTTON_BACK_Pin GPIO_PIN_13
|
||||||
|
#define BUTTON_BACK_GPIO_Port GPIOC
|
||||||
|
#define BUTTON_BACK_EXTI_IRQn EXTI15_10_IRQn
|
||||||
|
#define QUARTZ_32MHZ_IN_Pin GPIO_PIN_14
|
||||||
|
#define QUARTZ_32MHZ_IN_GPIO_Port GPIOC
|
||||||
|
#define QUARTZ_32MHZ_OUT_Pin GPIO_PIN_15
|
||||||
|
#define QUARTZ_32MHZ_OUT_GPIO_Port GPIOC
|
||||||
|
#define BOOT0_Pin GPIO_PIN_3
|
||||||
|
#define BOOT0_GPIO_Port GPIOH
|
||||||
|
#define SPEAKER_Pin GPIO_PIN_8
|
||||||
|
#define SPEAKER_GPIO_Port GPIOB
|
||||||
|
#define IR_TX_Pin GPIO_PIN_9
|
||||||
|
#define IR_TX_GPIO_Port GPIOB
|
||||||
|
#define PC0_Pin GPIO_PIN_0
|
||||||
|
#define PC0_GPIO_Port GPIOC
|
||||||
|
#define PC1_Pin GPIO_PIN_1
|
||||||
|
#define PC1_GPIO_Port GPIOC
|
||||||
|
#define BUTTON_OK_Pin GPIO_PIN_2
|
||||||
|
#define BUTTON_OK_GPIO_Port GPIOC
|
||||||
|
#define BUTTON_OK_EXTI_IRQn EXTI2_IRQn
|
||||||
|
#define PC3_Pin GPIO_PIN_3
|
||||||
|
#define PC3_GPIO_Port GPIOC
|
||||||
|
#define IR_RX_Pin GPIO_PIN_0
|
||||||
|
#define IR_RX_GPIO_Port GPIOA
|
||||||
|
#define LED_RED_Pin GPIO_PIN_1
|
||||||
|
#define LED_RED_GPIO_Port GPIOA
|
||||||
|
#define LED_GREEN_Pin GPIO_PIN_2
|
||||||
|
#define LED_GREEN_GPIO_Port GPIOA
|
||||||
|
#define LED_BLUE_Pin GPIO_PIN_3
|
||||||
|
#define LED_BLUE_GPIO_Port GPIOA
|
||||||
|
#define PA4_Pin GPIO_PIN_4
|
||||||
|
#define PA4_GPIO_Port GPIOA
|
||||||
|
#define PA5_Pin GPIO_PIN_5
|
||||||
|
#define PA5_GPIO_Port GPIOA
|
||||||
|
#define PA6_Pin GPIO_PIN_6
|
||||||
|
#define PA6_GPIO_Port GPIOA
|
||||||
|
#define PA7_Pin GPIO_PIN_7
|
||||||
|
#define PA7_GPIO_Port GPIOA
|
||||||
|
#define RFID_PULL_Pin GPIO_PIN_8
|
||||||
|
#define RFID_PULL_GPIO_Port GPIOA
|
||||||
|
#define RFID_PULL_EXTI_IRQn EXTI9_5_IRQn
|
||||||
|
#define I2C_SCL_Pin GPIO_PIN_9
|
||||||
|
#define I2C_SCL_GPIO_Port GPIOA
|
||||||
|
#define CC1101_G0_Pin GPIO_PIN_4
|
||||||
|
#define CC1101_G0_GPIO_Port GPIOC
|
||||||
|
#define RFID_RF_IN_Pin GPIO_PIN_5
|
||||||
|
#define RFID_RF_IN_GPIO_Port GPIOC
|
||||||
|
#define PB2_Pin GPIO_PIN_2
|
||||||
|
#define PB2_GPIO_Port GPIOB
|
||||||
|
#define BUTTON_UP_Pin GPIO_PIN_10
|
||||||
|
#define BUTTON_UP_GPIO_Port GPIOB
|
||||||
|
#define BUTTON_UP_EXTI_IRQn EXTI15_10_IRQn
|
||||||
|
#define BUTTON_LEFT_Pin GPIO_PIN_11
|
||||||
|
#define BUTTON_LEFT_GPIO_Port GPIOB
|
||||||
|
#define BUTTON_LEFT_EXTI_IRQn EXTI15_10_IRQn
|
||||||
|
#define DISPLAY_RST_Pin GPIO_PIN_0
|
||||||
|
#define DISPLAY_RST_GPIO_Port GPIOB
|
||||||
|
#define BUTTON_DOWN_Pin GPIO_PIN_1
|
||||||
|
#define BUTTON_DOWN_GPIO_Port GPIOB
|
||||||
|
#define BUTTON_DOWN_EXTI_IRQn EXTI1_IRQn
|
||||||
|
#define NFC_CS_Pin GPIO_PIN_4
|
||||||
|
#define NFC_CS_GPIO_Port GPIOE
|
||||||
|
#define BUTTON_RIGHT_Pin GPIO_PIN_12
|
||||||
|
#define BUTTON_RIGHT_GPIO_Port GPIOB
|
||||||
|
#define BUTTON_RIGHT_EXTI_IRQn EXTI15_10_IRQn
|
||||||
|
#define RFID_OUT_Pin GPIO_PIN_13
|
||||||
|
#define RFID_OUT_GPIO_Port GPIOB
|
||||||
|
#define iBTN_Pin GPIO_PIN_14
|
||||||
|
#define iBTN_GPIO_Port GPIOB
|
||||||
|
#define SPI_D_MOSI_Pin GPIO_PIN_15
|
||||||
|
#define SPI_D_MOSI_GPIO_Port GPIOB
|
||||||
|
#define DISPLAY_DI_Pin GPIO_PIN_6
|
||||||
|
#define DISPLAY_DI_GPIO_Port GPIOC
|
||||||
|
#define I2C_SDA_Pin GPIO_PIN_10
|
||||||
|
#define I2C_SDA_GPIO_Port GPIOA
|
||||||
|
#define DISPLAY_BACKLIGHT_Pin GPIO_PIN_15
|
||||||
|
#define DISPLAY_BACKLIGHT_GPIO_Port GPIOA
|
||||||
|
#define PC10_Pin GPIO_PIN_10
|
||||||
|
#define PC10_GPIO_Port GPIOC
|
||||||
|
#define DISPLAY_CS_Pin GPIO_PIN_11
|
||||||
|
#define DISPLAY_CS_GPIO_Port GPIOC
|
||||||
|
#define SD_CS_Pin GPIO_PIN_12
|
||||||
|
#define SD_CS_GPIO_Port GPIOC
|
||||||
|
#define CC1101_CS_Pin GPIO_PIN_0
|
||||||
|
#define CC1101_CS_GPIO_Port GPIOD
|
||||||
|
#define SPI_D_SCK_Pin GPIO_PIN_1
|
||||||
|
#define SPI_D_SCK_GPIO_Port GPIOD
|
||||||
|
#define SPI_R_SCK_Pin GPIO_PIN_3
|
||||||
|
#define SPI_R_SCK_GPIO_Port GPIOB
|
||||||
|
#define SPI_R_MISO_Pin GPIO_PIN_4
|
||||||
|
#define SPI_R_MISO_GPIO_Port GPIOB
|
||||||
|
#define SPI_R_MOSI_Pin GPIO_PIN_5
|
||||||
|
#define SPI_R_MOSI_GPIO_Port GPIOB
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
#define MISO_PIN GpioPin{.port = SPI_R_MISO_GPIO_Port, .pin = SPI_R_MISO_Pin}
|
||||||
|
|
||||||
|
#define SPI_R hspi1
|
||||||
|
#define SPI_D hspi2
|
||||||
|
#define SPI_SD_HANDLE SPI_R
|
||||||
|
|
||||||
|
extern TIM_HandleTypeDef htim1;
|
||||||
|
extern TIM_HandleTypeDef htim2;
|
||||||
|
extern TIM_HandleTypeDef htim16;
|
||||||
|
|
||||||
|
#define TIM_A htim1
|
||||||
|
#define TIM_B htim2
|
||||||
|
#define TIM_C htim16
|
||||||
|
|
||||||
|
#define SPEAKER_TIM htim16
|
||||||
|
#define SPEAKER_CH TIM_CHANNEL_1
|
||||||
|
|
||||||
|
#define LFRFID_TIM htim1
|
||||||
|
#define LFRFID_CH TIM_CHANNEL_1
|
||||||
|
|
||||||
|
#define IRDA_TIM htim1
|
||||||
|
#define IRDA_CH TIM_CHANNEL_3
|
||||||
|
|
||||||
|
#define NFC_IRQ_Pin RFID_PULL_Pin
|
||||||
|
#define NFC_IRQ_GPIO_Port RFID_PULL_GPIO_Port
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __MAIN_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
56
firmware/targets/f3/Inc/rf.h
Normal file
56
firmware/targets/f3/Inc/rf.h
Normal file
@ -0,0 +1,56 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : RF.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the RF instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __rf_H
|
||||||
|
#define __rf_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_RF_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ rf_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
58
firmware/targets/f3/Inc/rtc.h
Normal file
58
firmware/targets/f3/Inc/rtc.h
Normal file
@ -0,0 +1,58 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : RTC.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the RTC instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __rtc_H
|
||||||
|
#define __rtc_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern RTC_HandleTypeDef hrtc;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_RTC_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ rtc_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
63
firmware/targets/f3/Inc/spi.h
Normal file
63
firmware/targets/f3/Inc/spi.h
Normal file
@ -0,0 +1,63 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : SPI.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the SPI instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __spi_H
|
||||||
|
#define __spi_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern SPI_HandleTypeDef hspi1;
|
||||||
|
extern SPI_HandleTypeDef hspi2;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_SPI1_Init(void);
|
||||||
|
void MX_SPI2_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
void NFC_SPI_Reconfigure();
|
||||||
|
void SD_SPI_Reconfigure_Slow();
|
||||||
|
void SD_SPI_Reconfigure_Fast();
|
||||||
|
void CC1101_SPI_Reconfigure();
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ spi_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
359
firmware/targets/f3/Inc/stm32wbxx_hal_conf.h
Normal file
359
firmware/targets/f3/Inc/stm32wbxx_hal_conf.h
Normal file
@ -0,0 +1,359 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32wbxx_hal_conf.h
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @brief HAL configuration file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32WBxx_HAL_CONF_H
|
||||||
|
#define __STM32WBxx_HAL_CONF_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* ########################## Module Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief This is the list of modules to be used in the HAL driver
|
||||||
|
*/
|
||||||
|
#define HAL_MODULE_ENABLED
|
||||||
|
#define HAL_ADC_MODULE_ENABLED
|
||||||
|
/*#define HAL_CRYP_MODULE_ENABLED */
|
||||||
|
#define HAL_COMP_MODULE_ENABLED
|
||||||
|
/*#define HAL_CRC_MODULE_ENABLED */
|
||||||
|
#define HAL_HSEM_MODULE_ENABLED
|
||||||
|
#define HAL_I2C_MODULE_ENABLED
|
||||||
|
/*#define HAL_I2S_MODULE_ENABLED */
|
||||||
|
/*#define HAL_IPCC_MODULE_ENABLED */
|
||||||
|
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||||
|
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||||
|
/*#define HAL_LCD_MODULE_ENABLED */
|
||||||
|
/*#define HAL_LPTIM_MODULE_ENABLED */
|
||||||
|
#define HAL_PCD_MODULE_ENABLED
|
||||||
|
/*#define HAL_PKA_MODULE_ENABLED */
|
||||||
|
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||||
|
/*#define HAL_RNG_MODULE_ENABLED */
|
||||||
|
#define HAL_RTC_MODULE_ENABLED
|
||||||
|
/*#define HAL_SAI_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SMBUS_MODULE_ENABLED */
|
||||||
|
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
#define HAL_SPI_MODULE_ENABLED
|
||||||
|
#define HAL_TIM_MODULE_ENABLED
|
||||||
|
/*#define HAL_TSC_MODULE_ENABLED */
|
||||||
|
#define HAL_UART_MODULE_ENABLED
|
||||||
|
/*#define HAL_USART_MODULE_ENABLED */
|
||||||
|
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||||
|
#define HAL_EXTI_MODULE_ENABLED
|
||||||
|
#define HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#define HAL_DMA_MODULE_ENABLED
|
||||||
|
#define HAL_FLASH_MODULE_ENABLED
|
||||||
|
#define HAL_GPIO_MODULE_ENABLED
|
||||||
|
#define HAL_PWR_MODULE_ENABLED
|
||||||
|
#define HAL_RCC_MODULE_ENABLED
|
||||||
|
|
||||||
|
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_I2S_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_PCD_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_PKA_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_SAI_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_TSC_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
|
||||||
|
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
|
||||||
|
|
||||||
|
/* ########################## Oscillator Values adaptation ####################*/
|
||||||
|
/**
|
||||||
|
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSE is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#if !defined (HSE_VALUE)
|
||||||
|
#define HSE_VALUE 32000000U /*!< Value of the External oscillator in Hz */
|
||||||
|
#endif /* HSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (HSE_STARTUP_TIMEOUT)
|
||||||
|
#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
|
||||||
|
#endif /* HSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
||||||
|
* This value is the default MSI range value after Reset.
|
||||||
|
*/
|
||||||
|
#if !defined (MSI_VALUE)
|
||||||
|
#define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* MSI_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal High Speed oscillator (HSI) value.
|
||||||
|
* This value is used by the RCC HAL module to compute the system frequency
|
||||||
|
* (when HSI is used as system clock source, directly or through the PLL).
|
||||||
|
*/
|
||||||
|
#if !defined (HSI_VALUE)
|
||||||
|
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* HSI_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Low Speed oscillator (LSI1) value.
|
||||||
|
*/
|
||||||
|
#if !defined (LSI1_VALUE)
|
||||||
|
#define LSI1_VALUE ((uint32_t)32000) /*!< LSI1 Typical Value in Hz*/
|
||||||
|
#endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||||
|
The real value may vary depending on the variations
|
||||||
|
in voltage and temperature.*/
|
||||||
|
/**
|
||||||
|
* @brief Internal Low Speed oscillator (LSI2) value.
|
||||||
|
*/
|
||||||
|
#if !defined (LSI2_VALUE)
|
||||||
|
#define LSI2_VALUE ((uint32_t)32000) /*!< LSI2 Typical Value in Hz*/
|
||||||
|
#endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||||
|
The real value may vary depending on the variations
|
||||||
|
in voltage and temperature.*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief External Low Speed oscillator (LSE) value.
|
||||||
|
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||||
|
*/
|
||||||
|
#if !defined (LSE_VALUE)
|
||||||
|
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||||
|
#endif /* LSE_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Internal Multiple Speed oscillator (HSI48) default value.
|
||||||
|
* This value is the default HSI48 range value after Reset.
|
||||||
|
*/
|
||||||
|
#if !defined (HSI48_VALUE)
|
||||||
|
#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* HSI48_VALUE */
|
||||||
|
|
||||||
|
#if !defined (LSE_STARTUP_TIMEOUT)
|
||||||
|
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||||
|
#endif /* HSE_STARTUP_TIMEOUT */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief External clock source for SAI1 peripheral
|
||||||
|
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||||
|
* frequency.
|
||||||
|
*/
|
||||||
|
#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
|
||||||
|
#define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/
|
||||||
|
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
|
||||||
|
|
||||||
|
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||||
|
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||||
|
|
||||||
|
/* ########################### System Configuration ######################### */
|
||||||
|
/**
|
||||||
|
* @brief This is the HAL system configuration section
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||||
|
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
|
||||||
|
#define USE_RTOS 0U
|
||||||
|
#define PREFETCH_ENABLE 1U
|
||||||
|
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||||
|
#define DATA_CACHE_ENABLE 1U
|
||||||
|
|
||||||
|
/* ########################## Assert Selection ############################## */
|
||||||
|
/**
|
||||||
|
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||||
|
* HAL drivers code
|
||||||
|
*/
|
||||||
|
/* #define USE_FULL_ASSERT 1U */
|
||||||
|
|
||||||
|
/* ################## SPI peripheral configuration ########################## */
|
||||||
|
|
||||||
|
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||||
|
* Activated: CRC code is present inside driver
|
||||||
|
* Deactivated: CRC code cleaned from driver
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define USE_SPI_CRC 0U
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Include module's header file
|
||||||
|
*/
|
||||||
|
#ifdef HAL_DMA_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_dma.h"
|
||||||
|
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_adc.h"
|
||||||
|
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_COMP_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_comp.h"
|
||||||
|
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_cortex.h"
|
||||||
|
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRC_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_crc.h"
|
||||||
|
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_cryp.h"
|
||||||
|
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_exti.h"
|
||||||
|
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_flash.h"
|
||||||
|
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_gpio.h"
|
||||||
|
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_HSEM_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_hsem.h"
|
||||||
|
#endif /* HAL_HSEM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_i2c.h"
|
||||||
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_I2S_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_i2s.h"
|
||||||
|
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IPCC_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_ipcc.h"
|
||||||
|
#endif /* HAL_IPCC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_irda.h"
|
||||||
|
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_iwdg.h"
|
||||||
|
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_LCD_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_lcd.h"
|
||||||
|
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_lptim.h"
|
||||||
|
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_pcd.h"
|
||||||
|
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PKA_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_pka.h"
|
||||||
|
#endif /* HAL_PKA_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_PWR_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_pwr.h"
|
||||||
|
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_qspi.h"
|
||||||
|
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RCC_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_rcc.h"
|
||||||
|
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RNG_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_rng.h"
|
||||||
|
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_RTC_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_rtc.h"
|
||||||
|
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SAI_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_sai.h"
|
||||||
|
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_smartcard.h"
|
||||||
|
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_smbus.h"
|
||||||
|
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_spi.h"
|
||||||
|
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_tim.h"
|
||||||
|
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_TSC_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_tsc.h"
|
||||||
|
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_uart.h"
|
||||||
|
#endif /* HAL_UART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_USART_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_usart.h"
|
||||||
|
#endif /* HAL_USART_MODULE_ENABLED */
|
||||||
|
|
||||||
|
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||||
|
#include "stm32wbxx_hal_wwdg.h"
|
||||||
|
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
#ifdef USE_FULL_ASSERT
|
||||||
|
/**
|
||||||
|
* @brief The assert_param macro is used for function's parameters check.
|
||||||
|
* @param expr If expr is false, it calls assert_failed function
|
||||||
|
* which reports the name of the source file and the source
|
||||||
|
* line number of the call that failed.
|
||||||
|
* If expr is true, it returns no value.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||||
|
/* Exported functions ------------------------------------------------------- */
|
||||||
|
void assert_failed(uint8_t* file, uint32_t line);
|
||||||
|
#else
|
||||||
|
#define assert_param(expr) ((void)0U)
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32WBxx_HAL_CONF_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
74
firmware/targets/f3/Inc/stm32wbxx_it.h
Normal file
74
firmware/targets/f3/Inc/stm32wbxx_it.h
Normal file
@ -0,0 +1,74 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32wbxx_it.h
|
||||||
|
* @brief This file contains the headers of the interrupt handlers.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32WBxx_IT_H
|
||||||
|
#define __STM32WBxx_IT_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN ET */
|
||||||
|
|
||||||
|
/* USER CODE END ET */
|
||||||
|
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EC */
|
||||||
|
|
||||||
|
/* USER CODE END EC */
|
||||||
|
|
||||||
|
/* Exported macro ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN EM */
|
||||||
|
|
||||||
|
/* USER CODE END EM */
|
||||||
|
|
||||||
|
/* Exported functions prototypes ---------------------------------------------*/
|
||||||
|
void NMI_Handler(void);
|
||||||
|
void HardFault_Handler(void);
|
||||||
|
void MemManage_Handler(void);
|
||||||
|
void BusFault_Handler(void);
|
||||||
|
void UsageFault_Handler(void);
|
||||||
|
void DebugMon_Handler(void);
|
||||||
|
void EXTI1_IRQHandler(void);
|
||||||
|
void EXTI2_IRQHandler(void);
|
||||||
|
void USB_LP_IRQHandler(void);
|
||||||
|
void EXTI9_5_IRQHandler(void);
|
||||||
|
void TIM1_TRG_COM_TIM17_IRQHandler(void);
|
||||||
|
void TIM2_IRQHandler(void);
|
||||||
|
void EXTI15_10_IRQHandler(void);
|
||||||
|
void HSEM_IRQHandler(void);
|
||||||
|
/* USER CODE BEGIN EFP */
|
||||||
|
|
||||||
|
/* USER CODE END EFP */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32WBxx_IT_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
64
firmware/targets/f3/Inc/tim.h
Normal file
64
firmware/targets/f3/Inc/tim.h
Normal file
@ -0,0 +1,64 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : TIM.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the TIM instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __tim_H
|
||||||
|
#define __tim_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern TIM_HandleTypeDef htim1;
|
||||||
|
extern TIM_HandleTypeDef htim2;
|
||||||
|
extern TIM_HandleTypeDef htim16;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_TIM1_Init(void);
|
||||||
|
void MX_TIM2_Init(void);
|
||||||
|
void MX_TIM16_Init(void);
|
||||||
|
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ tim_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
58
firmware/targets/f3/Inc/usart.h
Normal file
58
firmware/targets/f3/Inc/usart.h
Normal file
@ -0,0 +1,58 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : USART.h
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the USART instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __usart_H
|
||||||
|
#define __usart_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern UART_HandleTypeDef huart1;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Private defines */
|
||||||
|
|
||||||
|
/* USER CODE END Private defines */
|
||||||
|
|
||||||
|
void MX_USART1_UART_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__ usart_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
105
firmware/targets/f3/Inc/usb_device.h
Normal file
105
firmware/targets/f3/Inc/usb_device.h
Normal file
@ -0,0 +1,105 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usb_device.h
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : Header for usb_device.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USB_DEVICE__H__
|
||||||
|
#define __USB_DEVICE__H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32wbxx.h"
|
||||||
|
#include "stm32wbxx_hal.h"
|
||||||
|
#include "usbd_def.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup USBD_OTG_DRIVER
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DEVICE USBD_DEVICE
|
||||||
|
* @brief Device file for Usb otg low level driver.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DEVICE_Exported_Variables USBD_DEVICE_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert your variables declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END VARIABLES */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DEVICE_Exported_FunctionsPrototype USBD_DEVICE_Exported_FunctionsPrototype
|
||||||
|
* @brief Declaration of public functions for Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** USB Device initialization function. */
|
||||||
|
void MX_USB_Device_Init(void);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert functions declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN FD */
|
||||||
|
|
||||||
|
/* USER CODE END FD */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USB_DEVICE__H__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
134
firmware/targets/f3/Inc/usbd_cdc_if.h
Normal file
134
firmware/targets/f3/Inc/usbd_cdc_if.h
Normal file
@ -0,0 +1,134 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_cdc_if.h
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : Header for usbd_cdc_if.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USBD_CDC_IF_H__
|
||||||
|
#define __USBD_CDC_IF_H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_cdc.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @brief For Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF USBD_CDC_IF
|
||||||
|
* @brief Usb VCP device module
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Defines USBD_CDC_IF_Exported_Defines
|
||||||
|
* @brief Defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN EXPORTED_DEFINES */
|
||||||
|
/* Define size for the receive and transmit buffer over CDC */
|
||||||
|
/* It's up to user to redefine and/or remove those define */
|
||||||
|
#define APP_RX_DATA_SIZE 2048
|
||||||
|
#define APP_TX_DATA_SIZE 2048
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Types USBD_CDC_IF_Exported_Types
|
||||||
|
* @brief Types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Macros USBD_CDC_IF_Exported_Macros
|
||||||
|
* @brief Aliases.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** CDC Interface callback. */
|
||||||
|
extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype USBD_CDC_IF_Exported_FunctionsPrototype
|
||||||
|
* @brief Public functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USBD_CDC_IF_H__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
176
firmware/targets/f3/Inc/usbd_conf.h
Normal file
176
firmware/targets/f3/Inc/usbd_conf.h
Normal file
@ -0,0 +1,176 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_conf.h
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : Header for usbd_conf.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USBD_CONF__H__
|
||||||
|
#define __USBD_CONF__H__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include "stm32wbxx.h"
|
||||||
|
#include "stm32wbxx_hal.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup USBD_OTG_DRIVER
|
||||||
|
* @brief Driver for Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF USBD_CONF
|
||||||
|
* @brief Configuration file for Usb otg low level driver.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Variables USBD_CONF_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* USER CODE END PV */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Defines USBD_CONF_Exported_Defines
|
||||||
|
* @brief Defines for configuration of the Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_MAX_NUM_INTERFACES 1U
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_MAX_NUM_CONFIGURATION 1U
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_MAX_STR_DESC_SIZ 512U
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_DEBUG_LEVEL 0U
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_LPM_ENABLED 1U
|
||||||
|
/*---------- -----------*/
|
||||||
|
#define USBD_SELF_POWERED 1U
|
||||||
|
|
||||||
|
/****************************************/
|
||||||
|
/* #define for FS and HS identification */
|
||||||
|
#define DEVICE_FS 0
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Macros USBD_CONF_Exported_Macros
|
||||||
|
* @brief Aliases.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Memory management macros */
|
||||||
|
|
||||||
|
/** Alias for memory allocation. */
|
||||||
|
#define USBD_malloc (void *)USBD_static_malloc
|
||||||
|
|
||||||
|
/** Alias for memory release. */
|
||||||
|
#define USBD_free USBD_static_free
|
||||||
|
|
||||||
|
/** Alias for memory set. */
|
||||||
|
#define USBD_memset memset
|
||||||
|
|
||||||
|
/** Alias for memory copy. */
|
||||||
|
#define USBD_memcpy memcpy
|
||||||
|
|
||||||
|
/** Alias for delay. */
|
||||||
|
#define USBD_Delay HAL_Delay
|
||||||
|
/* DEBUG macros */
|
||||||
|
|
||||||
|
#if (USBD_DEBUG_LEVEL > 0)
|
||||||
|
#define USBD_UsrLog(...) printf(__VA_ARGS__);\
|
||||||
|
printf("\n");
|
||||||
|
#else
|
||||||
|
#define USBD_UsrLog(...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (USBD_DEBUG_LEVEL > 1)
|
||||||
|
|
||||||
|
#define USBD_ErrLog(...) printf("ERROR: ") ;\
|
||||||
|
printf(__VA_ARGS__);\
|
||||||
|
printf("\n");
|
||||||
|
#else
|
||||||
|
#define USBD_ErrLog(...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if (USBD_DEBUG_LEVEL > 2)
|
||||||
|
#define USBD_DbgLog(...) printf("DEBUG : ") ;\
|
||||||
|
printf(__VA_ARGS__);\
|
||||||
|
printf("\n");
|
||||||
|
#else
|
||||||
|
#define USBD_DbgLog(...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_Types USBD_CONF_Exported_Types
|
||||||
|
* @brief Types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CONF_Exported_FunctionsPrototype USBD_CONF_Exported_FunctionsPrototype
|
||||||
|
* @brief Declaration of public functions for Usb device.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Exported functions -------------------------------------------------------*/
|
||||||
|
void *USBD_static_malloc(uint32_t size);
|
||||||
|
void USBD_static_free(void *p);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USBD_CONF__H__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
145
firmware/targets/f3/Inc/usbd_desc.h
Normal file
145
firmware/targets/f3/Inc/usbd_desc.h
Normal file
@ -0,0 +1,145 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_desc.c
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : Header for usbd_conf.c file.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USBD_DESC__C__
|
||||||
|
#define __USBD_DESC__C__
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_def.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC USBD_DESC
|
||||||
|
* @brief Usb device descriptors module.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Constants USBD_DESC_Exported_Constants
|
||||||
|
* @brief Constants.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define DEVICE_ID1 (UID_BASE)
|
||||||
|
#define DEVICE_ID2 (UID_BASE + 0x4)
|
||||||
|
#define DEVICE_ID3 (UID_BASE + 0x8)
|
||||||
|
|
||||||
|
#define USB_SIZ_STRING_SERIAL 0x1A
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_CONSTANTS */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_CONSTANTS */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Defines USBD_DESC_Exported_Defines
|
||||||
|
* @brief Defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_TypesDefinitions USBD_DESC_Exported_TypesDefinitions
|
||||||
|
* @brief Types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Macros USBD_DESC_Exported_Macros
|
||||||
|
* @brief Aliases.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_Variables USBD_DESC_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
extern USBD_DescriptorsTypeDef CDC_Desc;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Exported_FunctionsPrototype USBD_DESC_Exported_FunctionsPrototype
|
||||||
|
* @brief Public functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_FUNCTIONS */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USBD_DESC__C__ */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
398
firmware/targets/f3/Makefile
Normal file
398
firmware/targets/f3/Makefile
Normal file
@ -0,0 +1,398 @@
|
|||||||
|
##########################################################################################################################
|
||||||
|
# File automatically-generated by tool: [projectgenerator] version: [3.10.0-B14] date: [Thu Nov 05 17:53:24 MSK 2020]
|
||||||
|
##########################################################################################################################
|
||||||
|
|
||||||
|
# ------------------------------------------------
|
||||||
|
# Generic Makefile (based on gcc)
|
||||||
|
#
|
||||||
|
# ChangeLog :
|
||||||
|
# 2017-02-10 - Several enhancements + project update mode
|
||||||
|
# 2015-07-22 - first version
|
||||||
|
# ------------------------------------------------
|
||||||
|
|
||||||
|
######################################
|
||||||
|
# target
|
||||||
|
######################################
|
||||||
|
TARGET = f3
|
||||||
|
|
||||||
|
|
||||||
|
######################################
|
||||||
|
# building variables
|
||||||
|
######################################
|
||||||
|
# debug build?
|
||||||
|
DEBUG = 1
|
||||||
|
# optimization
|
||||||
|
OPT = -Og
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# paths
|
||||||
|
#######################################
|
||||||
|
# Build path
|
||||||
|
BUILD_DIR = build
|
||||||
|
|
||||||
|
######################################
|
||||||
|
# source
|
||||||
|
######################################
|
||||||
|
# C sources
|
||||||
|
C_SOURCES = \
|
||||||
|
Src/main.c \
|
||||||
|
Src/gpio.c \
|
||||||
|
Src/app_freertos.c \
|
||||||
|
Src/adc.c \
|
||||||
|
Src/i2c.c \
|
||||||
|
Src/rtc.c \
|
||||||
|
Src/spi.c \
|
||||||
|
Src/tim.c \
|
||||||
|
Src/usart.c \
|
||||||
|
Src/usb_device.c \
|
||||||
|
Src/usbd_conf.c \
|
||||||
|
Src/usbd_desc.c \
|
||||||
|
Src/usbd_cdc_if.c \
|
||||||
|
Src/stm32wbxx_it.c \
|
||||||
|
Src/stm32wbxx_hal_msp.c \
|
||||||
|
Src/stm32wbxx_hal_timebase_tim.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
|
||||||
|
Src/system_stm32wbxx.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/list.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
|
||||||
|
/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/list.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
|
||||||
|
C:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/list.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
|
||||||
|
Src/comp.c \
|
||||||
|
/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c \
|
||||||
|
Src/rf.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/list.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
|
||||||
|
C:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c
|
||||||
|
|
||||||
|
# ASM sources
|
||||||
|
ASM_SOURCES = \
|
||||||
|
startup_stm32wb55xx_cm4.s
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# binaries
|
||||||
|
#######################################
|
||||||
|
PREFIX = arm-none-eabi-
|
||||||
|
# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
|
||||||
|
# either it can be added to the PATH environment variable.
|
||||||
|
ifdef GCC_PATH
|
||||||
|
CC = $(GCC_PATH)/$(PREFIX)gcc
|
||||||
|
AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
|
||||||
|
CP = $(GCC_PATH)/$(PREFIX)objcopy
|
||||||
|
SZ = $(GCC_PATH)/$(PREFIX)size
|
||||||
|
else
|
||||||
|
CC = $(PREFIX)gcc
|
||||||
|
AS = $(PREFIX)gcc -x assembler-with-cpp
|
||||||
|
CP = $(PREFIX)objcopy
|
||||||
|
SZ = $(PREFIX)size
|
||||||
|
endif
|
||||||
|
HEX = $(CP) -O ihex
|
||||||
|
BIN = $(CP) -O binary -S
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# CFLAGS
|
||||||
|
#######################################
|
||||||
|
# cpu
|
||||||
|
CPU = -mcpu=cortex-m4
|
||||||
|
|
||||||
|
# fpu
|
||||||
|
FPU = -mfpu=fpv4-sp-d16
|
||||||
|
|
||||||
|
# float-abi
|
||||||
|
FLOAT-ABI = -mfloat-abi=hard
|
||||||
|
|
||||||
|
# mcu
|
||||||
|
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
|
||||||
|
|
||||||
|
# macros for gcc
|
||||||
|
# AS defines
|
||||||
|
AS_DEFS =
|
||||||
|
|
||||||
|
# C defines
|
||||||
|
C_DEFS = \
|
||||||
|
-DUSE_HAL_DRIVER \
|
||||||
|
-DSTM32WB55xx
|
||||||
|
|
||||||
|
|
||||||
|
# AS includes
|
||||||
|
AS_INCLUDES = \
|
||||||
|
-IInc
|
||||||
|
|
||||||
|
# C includes
|
||||||
|
C_INCLUDES = \
|
||||||
|
-IInc \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Inc \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/include \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/CMSIS/Include \
|
||||||
|
-I/Users/aku/Work/flipper/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/CMSIS/Include \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Inc \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/include \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
|
||||||
|
-IC:/work/cmake-stm32/projects/flipperzero-firmware-community/lib/STM32CubeWB/Drivers/CMSIS/Include \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Inc \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/include \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
|
||||||
|
-I/Users/aku/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/CMSIS/Include \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Inc \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/include \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
|
||||||
|
-IC:/Users/whoju/STM32Cube/Repository/STM32Cube_FW_WB_V1.9.0/Drivers/CMSIS/Include
|
||||||
|
|
||||||
|
|
||||||
|
# compile gcc flags
|
||||||
|
ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
|
||||||
|
|
||||||
|
CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
|
||||||
|
|
||||||
|
ifeq ($(DEBUG), 1)
|
||||||
|
CFLAGS += -g -gdwarf-2
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
||||||
|
# Generate dependency information
|
||||||
|
CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# LDFLAGS
|
||||||
|
#######################################
|
||||||
|
# link script
|
||||||
|
LDSCRIPT = stm32wb55xx_flash_cm4.ld
|
||||||
|
|
||||||
|
# libraries
|
||||||
|
LIBS = -lc -lm -lnosys
|
||||||
|
LIBDIR =
|
||||||
|
LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
|
||||||
|
|
||||||
|
# default action: build all
|
||||||
|
all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
|
||||||
|
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# build the application
|
||||||
|
#######################################
|
||||||
|
# list of objects
|
||||||
|
OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
|
||||||
|
vpath %.c $(sort $(dir $(C_SOURCES)))
|
||||||
|
# list of ASM program objects
|
||||||
|
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
|
||||||
|
vpath %.s $(sort $(dir $(ASM_SOURCES)))
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
|
||||||
|
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
|
||||||
|
$(AS) -c $(CFLAGS) $< -o $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
|
||||||
|
$(CC) $(OBJECTS) $(LDFLAGS) -o $@
|
||||||
|
$(SZ) $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||||
|
$(HEX) $< $@
|
||||||
|
|
||||||
|
$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
|
||||||
|
$(BIN) $< $@
|
||||||
|
|
||||||
|
$(BUILD_DIR):
|
||||||
|
mkdir $@
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# clean up
|
||||||
|
#######################################
|
||||||
|
clean:
|
||||||
|
-rm -fR $(BUILD_DIR)
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# dependencies
|
||||||
|
#######################################
|
||||||
|
-include $(wildcard $(BUILD_DIR)/*.d)
|
||||||
|
|
||||||
|
# *** EOF ***
|
106
firmware/targets/f3/Src/adc.c
Normal file
106
firmware/targets/f3/Src/adc.c
Normal file
@ -0,0 +1,106 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : ADC.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the ADC instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "adc.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
ADC_HandleTypeDef hadc1;
|
||||||
|
|
||||||
|
/* ADC1 init function */
|
||||||
|
void MX_ADC1_Init(void)
|
||||||
|
{
|
||||||
|
ADC_ChannelConfTypeDef sConfig = {0};
|
||||||
|
|
||||||
|
/** Common config
|
||||||
|
*/
|
||||||
|
hadc1.Instance = ADC1;
|
||||||
|
hadc1.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
|
||||||
|
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||||
|
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||||
|
hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE;
|
||||||
|
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||||
|
hadc1.Init.LowPowerAutoWait = DISABLE;
|
||||||
|
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||||
|
hadc1.Init.NbrOfConversion = 1;
|
||||||
|
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||||
|
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||||
|
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||||
|
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||||||
|
hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED;
|
||||||
|
hadc1.Init.OversamplingMode = DISABLE;
|
||||||
|
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Configure Regular Channel
|
||||||
|
*/
|
||||||
|
sConfig.Channel = ADC_CHANNEL_TEMPSENSOR;
|
||||||
|
sConfig.Rank = ADC_REGULAR_RANK_1;
|
||||||
|
sConfig.SamplingTime = ADC_SAMPLETIME_2CYCLES_5;
|
||||||
|
sConfig.SingleDiff = ADC_SINGLE_ENDED;
|
||||||
|
sConfig.OffsetNumber = ADC_OFFSET_NONE;
|
||||||
|
sConfig.Offset = 0;
|
||||||
|
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(adcHandle->Instance==ADC1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspInit 0 */
|
||||||
|
/* ADC1 clock enable */
|
||||||
|
__HAL_RCC_ADC_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(adcHandle->Instance==ADC1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_ADC_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END ADC1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
181
firmware/targets/f3/Src/app_freertos.c
Normal file
181
firmware/targets/f3/Src/app_freertos.c
Normal file
@ -0,0 +1,181 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : app_freertos.c
|
||||||
|
* Description : Code for freertos applications
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "FreeRTOS.h"
|
||||||
|
#include "task.h"
|
||||||
|
#include "main.h"
|
||||||
|
#include "cmsis_os.h"
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PTD */
|
||||||
|
|
||||||
|
/* USER CODE END PTD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PD */
|
||||||
|
|
||||||
|
/* USER CODE END PD */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PM */
|
||||||
|
|
||||||
|
/* USER CODE END PM */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Variables */
|
||||||
|
|
||||||
|
/* USER CODE END Variables */
|
||||||
|
/* Definitions for defaultTask */
|
||||||
|
osThreadId_t defaultTaskHandle;
|
||||||
|
const osThreadAttr_t defaultTask_attributes = {
|
||||||
|
.name = "defaultTask",
|
||||||
|
.priority = (osPriority_t) osPriorityNormal,
|
||||||
|
.stack_size = 1024 * 4
|
||||||
|
};
|
||||||
|
/* Definitions for app_main */
|
||||||
|
osThreadId_t app_mainHandle;
|
||||||
|
const osThreadAttr_t app_main_attributes = {
|
||||||
|
.name = "app_main",
|
||||||
|
.priority = (osPriority_t) osPriorityLow,
|
||||||
|
.stack_size = 1024 * 4
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN FunctionPrototypes */
|
||||||
|
|
||||||
|
/* USER CODE END FunctionPrototypes */
|
||||||
|
|
||||||
|
void StartDefaultTask(void *argument);
|
||||||
|
extern void app(void *argument);
|
||||||
|
|
||||||
|
void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
|
||||||
|
|
||||||
|
/* Hook prototypes */
|
||||||
|
void configureTimerForRunTimeStats(void);
|
||||||
|
unsigned long getRunTimeCounterValue(void);
|
||||||
|
void vApplicationIdleHook(void);
|
||||||
|
void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
/* Functions needed when configGENERATE_RUN_TIME_STATS is on */
|
||||||
|
__weak void configureTimerForRunTimeStats(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
__weak unsigned long getRunTimeCounterValue(void)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
__weak void vApplicationIdleHook( void )
|
||||||
|
{
|
||||||
|
/* vApplicationIdleHook() will only be called if configUSE_IDLE_HOOK is set
|
||||||
|
to 1 in FreeRTOSConfig.h. It will be called on each iteration of the idle
|
||||||
|
task. It is essential that code added to this hook function never attempts
|
||||||
|
to block in any way (for example, call xQueueReceive() with a block time
|
||||||
|
specified, or call vTaskDelay()). If the application makes use of the
|
||||||
|
vTaskDelete() API function (as this demo application does) then it is also
|
||||||
|
important that vApplicationIdleHook() is permitted to return to its calling
|
||||||
|
function, because it is the responsibility of the idle task to clean up
|
||||||
|
memory allocated by the kernel to any task that has since been deleted. */
|
||||||
|
}
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 4 */
|
||||||
|
__weak void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName)
|
||||||
|
{
|
||||||
|
/* Run time stack overflow checking is performed if
|
||||||
|
configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook function is
|
||||||
|
called if a stack overflow is detected. */
|
||||||
|
}
|
||||||
|
/* USER CODE END 4 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief FreeRTOS initialization
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void MX_FREERTOS_Init(void) {
|
||||||
|
/* USER CODE BEGIN Init */
|
||||||
|
|
||||||
|
/* USER CODE END Init */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTOS_MUTEX */
|
||||||
|
/* add mutexes, ... */
|
||||||
|
/* USER CODE END RTOS_MUTEX */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTOS_SEMAPHORES */
|
||||||
|
/* add semaphores, ... */
|
||||||
|
/* USER CODE END RTOS_SEMAPHORES */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTOS_TIMERS */
|
||||||
|
/* start timers, add new ones, ... */
|
||||||
|
/* USER CODE END RTOS_TIMERS */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTOS_QUEUES */
|
||||||
|
/* add queues, ... */
|
||||||
|
/* USER CODE END RTOS_QUEUES */
|
||||||
|
|
||||||
|
/* Create the thread(s) */
|
||||||
|
/* creation of defaultTask */
|
||||||
|
defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
|
||||||
|
|
||||||
|
/* creation of app_main */
|
||||||
|
app_mainHandle = osThreadNew(app, NULL, &app_main_attributes);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN RTOS_THREADS */
|
||||||
|
/* add threads, ... */
|
||||||
|
/* USER CODE END RTOS_THREADS */
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Header_StartDefaultTask */
|
||||||
|
/**
|
||||||
|
* @brief Function implementing the defaultTask thread.
|
||||||
|
* @param argument: Not used
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header_StartDefaultTask */
|
||||||
|
void StartDefaultTask(void *argument)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN StartDefaultTask */
|
||||||
|
/* Infinite loop */
|
||||||
|
for(;;)
|
||||||
|
{
|
||||||
|
osDelay(1);
|
||||||
|
}
|
||||||
|
/* USER CODE END StartDefaultTask */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Private application code --------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Application */
|
||||||
|
|
||||||
|
/* USER CODE END Application */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
98
firmware/targets/f3/Src/comp.c
Normal file
98
firmware/targets/f3/Src/comp.c
Normal file
@ -0,0 +1,98 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : COMP.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the COMP instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "comp.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
COMP_HandleTypeDef hcomp1;
|
||||||
|
|
||||||
|
/* COMP1 init function */
|
||||||
|
void MX_COMP1_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
hcomp1.Instance = COMP1;
|
||||||
|
hcomp1.Init.InputMinus = COMP_INPUT_MINUS_1_2VREFINT;
|
||||||
|
hcomp1.Init.InputPlus = COMP_INPUT_PLUS_IO1;
|
||||||
|
hcomp1.Init.OutputPol = COMP_OUTPUTPOL_NONINVERTED;
|
||||||
|
hcomp1.Init.Hysteresis = COMP_HYSTERESIS_NONE;
|
||||||
|
hcomp1.Init.BlankingSrce = COMP_BLANKINGSRC_NONE;
|
||||||
|
hcomp1.Init.Mode = COMP_POWERMODE_HIGHSPEED;
|
||||||
|
hcomp1.Init.WindowMode = COMP_WINDOWMODE_DISABLE;
|
||||||
|
hcomp1.Init.TriggerMode = COMP_TRIGGERMODE_NONE;
|
||||||
|
if (HAL_COMP_Init(&hcomp1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_COMP_MspInit(COMP_HandleTypeDef* compHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(compHandle->Instance==COMP1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN COMP1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END COMP1_MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||||
|
/**COMP1 GPIO Configuration
|
||||||
|
PC5 ------> COMP1_INP
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = RFID_RF_IN_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(RFID_RF_IN_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN COMP1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END COMP1_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_COMP_MspDeInit(COMP_HandleTypeDef* compHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(compHandle->Instance==COMP1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN COMP1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END COMP1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/**COMP1 GPIO Configuration
|
||||||
|
PC5 ------> COMP1_INP
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(RFID_RF_IN_GPIO_Port, RFID_RF_IN_Pin);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN COMP1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END COMP1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
56
firmware/targets/f3/Src/fatfs/fatfs.c
Normal file
56
firmware/targets/f3/Src/fatfs/fatfs.c
Normal file
@ -0,0 +1,56 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file fatfs.c
|
||||||
|
* @brief Code for fatfs applications
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "fatfs.h"
|
||||||
|
|
||||||
|
uint8_t retUSER; /* Return value for USER */
|
||||||
|
char USERPath[4]; /* USER logical drive path */
|
||||||
|
FATFS USERFatFS; /* File system object for USER logical drive */
|
||||||
|
FIL USERFile; /* File object for USER */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Variables */
|
||||||
|
|
||||||
|
/* USER CODE END Variables */
|
||||||
|
|
||||||
|
void MX_FATFS_Init(void)
|
||||||
|
{
|
||||||
|
/*## FatFS: Link the USER driver ###########################*/
|
||||||
|
retUSER = FATFS_LinkDriver(&USER_Driver, USERPath);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Init */
|
||||||
|
/* additional user code for init */
|
||||||
|
/* USER CODE END Init */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Gets Time from RTC
|
||||||
|
* @param None
|
||||||
|
* @retval Time in DWORD
|
||||||
|
*/
|
||||||
|
DWORD get_fattime(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN get_fattime */
|
||||||
|
return 0;
|
||||||
|
/* USER CODE END get_fattime */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Application */
|
||||||
|
|
||||||
|
/* USER CODE END Application */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
49
firmware/targets/f3/Src/fatfs/fatfs.h
Normal file
49
firmware/targets/f3/Src/fatfs/fatfs.h
Normal file
@ -0,0 +1,49 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file fatfs.h
|
||||||
|
* @brief Header for fatfs applications
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __fatfs_H
|
||||||
|
#define __fatfs_H
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include "fatfs/ff.h"
|
||||||
|
#include "fatfs/ff_gen_drv.h"
|
||||||
|
#include "user_diskio.h" /* defines USER_Driver as external */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
extern uint8_t retUSER; /* Return value for USER */
|
||||||
|
extern char USERPath[4]; /* USER logical drive path */
|
||||||
|
extern FATFS USERFatFS; /* File system object for USER logical drive */
|
||||||
|
extern FIL USERFile; /* File object for USER */
|
||||||
|
|
||||||
|
void MX_FATFS_Init(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Prototypes */
|
||||||
|
|
||||||
|
/* USER CODE END Prototypes */
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /*__fatfs_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
270
firmware/targets/f3/Src/fatfs/ffconf.h
Normal file
270
firmware/targets/f3/Src/fatfs/ffconf.h
Normal file
@ -0,0 +1,270 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* FatFs - Generic FAT file system module R0.12c (C)ChaN, 2017
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
#ifndef _FFCONF
|
||||||
|
#define _FFCONF 68300 /* Revision ID */
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------------/
|
||||||
|
/ Additional user header to be used
|
||||||
|
/-----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#include "main.h"
|
||||||
|
#include "stm32wbxx_hal.h"
|
||||||
|
#include "cmsis_os.h" /* _FS_REENTRANT set to 1 and CMSIS API chosen */
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------------/
|
||||||
|
/ Function Configurations
|
||||||
|
/-----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */
|
||||||
|
/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
|
||||||
|
/ Read-only configuration removes writing API functions, f_write(), f_sync(),
|
||||||
|
/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
|
||||||
|
/ and optional writing functions as well. */
|
||||||
|
|
||||||
|
#define _FS_MINIMIZE 0 /* 0 to 3 */
|
||||||
|
/* This option defines minimization level to remove some basic API functions.
|
||||||
|
/
|
||||||
|
/ 0: All basic functions are enabled.
|
||||||
|
/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
|
||||||
|
/ are removed.
|
||||||
|
/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
|
||||||
|
/ 3: f_lseek() function is removed in addition to 2. */
|
||||||
|
|
||||||
|
#define _USE_STRFUNC 2 /* 0:Disable or 1-2:Enable */
|
||||||
|
/* This option switches string functions, f_gets(), f_putc(), f_puts() and
|
||||||
|
/ f_printf().
|
||||||
|
/
|
||||||
|
/ 0: Disable string functions.
|
||||||
|
/ 1: Enable without LF-CRLF conversion.
|
||||||
|
/ 2: Enable with LF-CRLF conversion. */
|
||||||
|
|
||||||
|
#define _USE_FIND 0
|
||||||
|
/* This option switches filtered directory read functions, f_findfirst() and
|
||||||
|
/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
|
||||||
|
|
||||||
|
#define _USE_MKFS 1
|
||||||
|
/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
|
||||||
|
|
||||||
|
#define _USE_FASTSEEK 1
|
||||||
|
/* This option switches fast seek feature. (0:Disable or 1:Enable) */
|
||||||
|
|
||||||
|
#define _USE_EXPAND 0
|
||||||
|
/* This option switches f_expand function. (0:Disable or 1:Enable) */
|
||||||
|
|
||||||
|
#define _USE_CHMOD 0
|
||||||
|
/* This option switches attribute manipulation functions, f_chmod() and f_utime().
|
||||||
|
/ (0:Disable or 1:Enable) Also _FS_READONLY needs to be 0 to enable this option. */
|
||||||
|
|
||||||
|
#define _USE_LABEL 0
|
||||||
|
/* This option switches volume label functions, f_getlabel() and f_setlabel().
|
||||||
|
/ (0:Disable or 1:Enable) */
|
||||||
|
|
||||||
|
#define _USE_FORWARD 0
|
||||||
|
/* This option switches f_forward() function. (0:Disable or 1:Enable) */
|
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------------/
|
||||||
|
/ Locale and Namespace Configurations
|
||||||
|
/-----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define _CODE_PAGE 850
|
||||||
|
/* This option specifies the OEM code page to be used on the target system.
|
||||||
|
/ Incorrect setting of the code page can cause a file open failure.
|
||||||
|
/
|
||||||
|
/ 1 - ASCII (No extended character. Non-LFN cfg. only)
|
||||||
|
/ 437 - U.S.
|
||||||
|
/ 720 - Arabic
|
||||||
|
/ 737 - Greek
|
||||||
|
/ 771 - KBL
|
||||||
|
/ 775 - Baltic
|
||||||
|
/ 850 - Latin 1
|
||||||
|
/ 852 - Latin 2
|
||||||
|
/ 855 - Cyrillic
|
||||||
|
/ 857 - Turkish
|
||||||
|
/ 860 - Portuguese
|
||||||
|
/ 861 - Icelandic
|
||||||
|
/ 862 - Hebrew
|
||||||
|
/ 863 - Canadian French
|
||||||
|
/ 864 - Arabic
|
||||||
|
/ 865 - Nordic
|
||||||
|
/ 866 - Russian
|
||||||
|
/ 869 - Greek 2
|
||||||
|
/ 932 - Japanese (DBCS)
|
||||||
|
/ 936 - Simplified Chinese (DBCS)
|
||||||
|
/ 949 - Korean (DBCS)
|
||||||
|
/ 950 - Traditional Chinese (DBCS)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define _USE_LFN 2 /* 0 to 3 */
|
||||||
|
#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */
|
||||||
|
/* The _USE_LFN switches the support of long file name (LFN).
|
||||||
|
/
|
||||||
|
/ 0: Disable support of LFN. _MAX_LFN has no effect.
|
||||||
|
/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
|
||||||
|
/ 2: Enable LFN with dynamic working buffer on the STACK.
|
||||||
|
/ 3: Enable LFN with dynamic working buffer on the HEAP.
|
||||||
|
/
|
||||||
|
/ To enable the LFN, Unicode handling functions (option/unicode.c) must be added
|
||||||
|
/ to the project. The working buffer occupies (_MAX_LFN + 1) * 2 bytes and
|
||||||
|
/ additional 608 bytes at exFAT enabled. _MAX_LFN can be in range from 12 to 255.
|
||||||
|
/ It should be set 255 to support full featured LFN operations.
|
||||||
|
/ When use stack for the working buffer, take care on stack overflow. When use heap
|
||||||
|
/ memory for the working buffer, memory management functions, ff_memalloc() and
|
||||||
|
/ ff_memfree(), must be added to the project. */
|
||||||
|
|
||||||
|
#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */
|
||||||
|
/* This option switches character encoding on the API. (0:ANSI/OEM or 1:UTF-16)
|
||||||
|
/ To use Unicode string for the path name, enable LFN and set _LFN_UNICODE = 1.
|
||||||
|
/ This option also affects behavior of string I/O functions. */
|
||||||
|
|
||||||
|
#define _STRF_ENCODE 3
|
||||||
|
/* When _LFN_UNICODE == 1, this option selects the character encoding ON THE FILE to
|
||||||
|
/ be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
|
||||||
|
/
|
||||||
|
/ 0: ANSI/OEM
|
||||||
|
/ 1: UTF-16LE
|
||||||
|
/ 2: UTF-16BE
|
||||||
|
/ 3: UTF-8
|
||||||
|
/
|
||||||
|
/ This option has no effect when _LFN_UNICODE == 0. */
|
||||||
|
|
||||||
|
#define _FS_RPATH 0 /* 0 to 2 */
|
||||||
|
/* This option configures support of relative path.
|
||||||
|
/
|
||||||
|
/ 0: Disable relative path and remove related functions.
|
||||||
|
/ 1: Enable relative path. f_chdir() and f_chdrive() are available.
|
||||||
|
/ 2: f_getcwd() function is available in addition to 1.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*---------------------------------------------------------------------------/
|
||||||
|
/ Drive/Volume Configurations
|
||||||
|
/----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define _VOLUMES 1
|
||||||
|
/* Number of volumes (logical drives) to be used. */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Volumes */
|
||||||
|
#define _STR_VOLUME_ID 0 /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
|
||||||
|
#define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
|
||||||
|
/* _STR_VOLUME_ID switches string support of volume ID.
|
||||||
|
/ When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
|
||||||
|
/ number in the path name. _VOLUME_STRS defines the drive ID strings for each
|
||||||
|
/ logical drives. Number of items must be equal to _VOLUMES. Valid characters for
|
||||||
|
/ the drive ID strings are: A-Z and 0-9. */
|
||||||
|
/* USER CODE END Volumes */
|
||||||
|
|
||||||
|
#define _MULTI_PARTITION 0 /* 0:Single partition, 1:Multiple partition */
|
||||||
|
/* This option switches support of multi-partition on a physical drive.
|
||||||
|
/ By default (0), each logical drive number is bound to the same physical drive
|
||||||
|
/ number and only an FAT volume found on the physical drive will be mounted.
|
||||||
|
/ When multi-partition is enabled (1), each logical drive number can be bound to
|
||||||
|
/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
|
||||||
|
/ funciton will be available. */
|
||||||
|
#define _MIN_SS 512 /* 512, 1024, 2048 or 4096 */
|
||||||
|
#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */
|
||||||
|
/* These options configure the range of sector size to be supported. (512, 1024,
|
||||||
|
/ 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
|
||||||
|
/ harddisk. But a larger value may be required for on-board flash memory and some
|
||||||
|
/ type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
|
||||||
|
/ to variable sector size and GET_SECTOR_SIZE command must be implemented to the
|
||||||
|
/ disk_ioctl() function. */
|
||||||
|
|
||||||
|
#define _USE_TRIM 0
|
||||||
|
/* This option switches support of ATA-TRIM. (0:Disable or 1:Enable)
|
||||||
|
/ To enable Trim function, also CTRL_TRIM command should be implemented to the
|
||||||
|
/ disk_ioctl() function. */
|
||||||
|
|
||||||
|
#define _FS_NOFSINFO 0 /* 0,1,2 or 3 */
|
||||||
|
/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
|
||||||
|
/ option, and f_getfree() function at first time after volume mount will force
|
||||||
|
/ a full FAT scan. Bit 1 controls the use of last allocated cluster number.
|
||||||
|
/
|
||||||
|
/ bit0=0: Use free cluster count in the FSINFO if available.
|
||||||
|
/ bit0=1: Do not trust free cluster count in the FSINFO.
|
||||||
|
/ bit1=0: Use last allocated cluster number in the FSINFO if available.
|
||||||
|
/ bit1=1: Do not trust last allocated cluster number in the FSINFO.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*---------------------------------------------------------------------------/
|
||||||
|
/ System Configurations
|
||||||
|
/----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define _FS_TINY 0 /* 0:Normal or 1:Tiny */
|
||||||
|
/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
|
||||||
|
/ At the tiny configuration, size of file object (FIL) is reduced _MAX_SS bytes.
|
||||||
|
/ Instead of private sector buffer eliminated from the file object, common sector
|
||||||
|
/ buffer in the file system object (FATFS) is used for the file data transfer. */
|
||||||
|
|
||||||
|
#define _FS_EXFAT 0
|
||||||
|
/* This option switches support of exFAT file system. (0:Disable or 1:Enable)
|
||||||
|
/ When enable exFAT, also LFN needs to be enabled. (_USE_LFN >= 1)
|
||||||
|
/ Note that enabling exFAT discards C89 compatibility. */
|
||||||
|
|
||||||
|
#define _FS_NORTC 0
|
||||||
|
#define _NORTC_MON 6
|
||||||
|
#define _NORTC_MDAY 4
|
||||||
|
#define _NORTC_YEAR 2015
|
||||||
|
/* The option _FS_NORTC switches timestamp functiton. If the system does not have
|
||||||
|
/ any RTC function or valid timestamp is not needed, set _FS_NORTC = 1 to disable
|
||||||
|
/ the timestamp function. All objects modified by FatFs will have a fixed timestamp
|
||||||
|
/ defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR in local time.
|
||||||
|
/ To enable timestamp function (_FS_NORTC = 0), get_fattime() function need to be
|
||||||
|
/ added to the project to get current time form real-time clock. _NORTC_MON,
|
||||||
|
/ _NORTC_MDAY and _NORTC_YEAR have no effect.
|
||||||
|
/ These options have no effect at read-only configuration (_FS_READONLY = 1). */
|
||||||
|
|
||||||
|
#define _FS_LOCK 2 /* 0:Disable or >=1:Enable */
|
||||||
|
/* The option _FS_LOCK switches file lock function to control duplicated file open
|
||||||
|
/ and illegal operation to open objects. This option must be 0 when _FS_READONLY
|
||||||
|
/ is 1.
|
||||||
|
/
|
||||||
|
/ 0: Disable file lock function. To avoid volume corruption, application program
|
||||||
|
/ should avoid illegal open, remove and rename to the open objects.
|
||||||
|
/ >0: Enable file lock function. The value defines how many files/sub-directories
|
||||||
|
/ can be opened simultaneously under file lock control. Note that the file
|
||||||
|
/ lock control is independent of re-entrancy. */
|
||||||
|
|
||||||
|
#define _FS_REENTRANT 1 /* 0:Disable or 1:Enable */
|
||||||
|
#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */
|
||||||
|
#define _SYNC_t osMutexId_t
|
||||||
|
/* The option _FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
|
||||||
|
/ module itself. Note that regardless of this option, file access to different
|
||||||
|
/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
|
||||||
|
/ and f_fdisk() function, are always not re-entrant. Only file/directory access
|
||||||
|
/ to the same volume is under control of this function.
|
||||||
|
/
|
||||||
|
/ 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
|
||||||
|
/ 1: Enable re-entrancy. Also user provided synchronization handlers,
|
||||||
|
/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
|
||||||
|
/ function, must be added to the project. Samples are available in
|
||||||
|
/ option/syscall.c.
|
||||||
|
/
|
||||||
|
/ The _FS_TIMEOUT defines timeout period in unit of time tick.
|
||||||
|
/ The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
|
||||||
|
/ SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be
|
||||||
|
/ included somewhere in the scope of ff.h. */
|
||||||
|
|
||||||
|
/* define the ff_malloc ff_free macros as standard malloc free */
|
||||||
|
#if !defined(ff_malloc) && !defined(ff_free)
|
||||||
|
#include <stdlib.h>
|
||||||
|
#define ff_malloc malloc
|
||||||
|
#define ff_free free
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _FFCONF */
|
124
firmware/targets/f3/Src/fatfs/spi_sd_hal.c
Normal file
124
firmware/targets/f3/Src/fatfs/spi_sd_hal.c
Normal file
@ -0,0 +1,124 @@
|
|||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
#define SD_DUMMY_BYTE 0xFF
|
||||||
|
#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_RESET)
|
||||||
|
#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_SET)
|
||||||
|
|
||||||
|
const uint32_t SpiTimeout = 1000;
|
||||||
|
extern SPI_HandleTypeDef SPI_SD_HANDLE;
|
||||||
|
uint8_t SD_IO_WriteByte(uint8_t Data);
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
BUS OPERATIONS
|
||||||
|
*******************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SPI error treatment function
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void SPIx_Error(void) {
|
||||||
|
/* De-initialize the SPI communication BUS */
|
||||||
|
HAL_SPI_DeInit(&SPI_SD_HANDLE);
|
||||||
|
|
||||||
|
/* Re-Initiaize the SPI communication BUS */
|
||||||
|
HAL_SPI_Init(&SPI_SD_HANDLE);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SPI Write byte(s) to device
|
||||||
|
* @param DataIn: Pointer to data buffer to write
|
||||||
|
* @param DataOut: Pointer to data buffer for read data
|
||||||
|
* @param DataLength: number of bytes to write
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void SPIx_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
|
||||||
|
HAL_StatusTypeDef status = HAL_OK;
|
||||||
|
status =
|
||||||
|
HAL_SPI_TransmitReceive(&SPI_SD_HANDLE, (uint8_t*)DataIn, DataOut, DataLength, SpiTimeout);
|
||||||
|
|
||||||
|
/* Check the communication status */
|
||||||
|
if(status != HAL_OK) {
|
||||||
|
/* Execute user timeout callback */
|
||||||
|
SPIx_Error();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SPI Write a byte to device
|
||||||
|
* @param Value: value to be written
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
__attribute__((unused)) static void SPIx_Write(uint8_t Value) {
|
||||||
|
HAL_StatusTypeDef status = HAL_OK;
|
||||||
|
uint8_t data;
|
||||||
|
|
||||||
|
status = HAL_SPI_TransmitReceive(&SPI_SD_HANDLE, (uint8_t*)&Value, &data, 1, SpiTimeout);
|
||||||
|
|
||||||
|
/* Check the communication status */
|
||||||
|
if(status != HAL_OK) {
|
||||||
|
/* Execute user timeout callback */
|
||||||
|
SPIx_Error();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
LINK OPERATIONS
|
||||||
|
*******************************************************************************/
|
||||||
|
|
||||||
|
/********************************* LINK SD ************************************/
|
||||||
|
/**
|
||||||
|
* @brief Initialize the SD Card and put it into StandBy State (Ready for
|
||||||
|
* data transfer).
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SD_IO_Init(void) {
|
||||||
|
uint8_t counter = 0;
|
||||||
|
|
||||||
|
/* SD chip select high */
|
||||||
|
SD_CS_HIGH();
|
||||||
|
|
||||||
|
/* Send dummy byte 0xFF, 10 times with CS high */
|
||||||
|
/* Rise CS and MOSI for 80 clocks cycles */
|
||||||
|
for(counter = 0; counter <= 200; counter++) {
|
||||||
|
/* Send dummy byte 0xFF */
|
||||||
|
SD_IO_WriteByte(SD_DUMMY_BYTE);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Set SD interface Chip Select state
|
||||||
|
* @param val: 0 (low) or 1 (high) state
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SD_IO_CSState(uint8_t val) {
|
||||||
|
if(val == 1) {
|
||||||
|
SD_CS_HIGH();
|
||||||
|
} else {
|
||||||
|
SD_CS_LOW();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Write byte(s) on the SD
|
||||||
|
* @param DataIn: Pointer to data buffer to write
|
||||||
|
* @param DataOut: Pointer to data buffer for read data
|
||||||
|
* @param DataLength: number of bytes to write
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SD_IO_WriteReadData(const uint8_t* DataIn, uint8_t* DataOut, uint16_t DataLength) {
|
||||||
|
/* Send the byte */
|
||||||
|
SPIx_WriteReadData(DataIn, DataOut, DataLength);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Write a byte on the SD.
|
||||||
|
* @param Data: byte to send.
|
||||||
|
* @retval Data written
|
||||||
|
*/
|
||||||
|
uint8_t SD_IO_WriteByte(uint8_t Data) {
|
||||||
|
uint8_t tmp;
|
||||||
|
|
||||||
|
/* Send the byte */
|
||||||
|
SPIx_WriteReadData(&Data, &tmp, 1);
|
||||||
|
return tmp;
|
||||||
|
}
|
1013
firmware/targets/f3/Src/fatfs/stm32_adafruit_sd.c
Normal file
1013
firmware/targets/f3/Src/fatfs/stm32_adafruit_sd.c
Normal file
File diff suppressed because it is too large
Load Diff
251
firmware/targets/f3/Src/fatfs/stm32_adafruit_sd.h
Normal file
251
firmware/targets/f3/Src/fatfs/stm32_adafruit_sd.h
Normal file
@ -0,0 +1,251 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32_adafruit_sd.h
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @version V3.0.0
|
||||||
|
* @date 23-December-2016
|
||||||
|
* @brief This file contains the common defines and functions prototypes for
|
||||||
|
* the stm32_adafruit_sd.c driver.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
* are permitted provided that the following conditions are met:
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __STM32_ADAFRUIT_SD_H
|
||||||
|
#define __STM32_ADAFRUIT_SD_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
/** @addtogroup BSP
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
#define __IO volatile
|
||||||
|
|
||||||
|
/** @addtogroup STM32_ADAFRUIT
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup STM32_ADAFRUIT_SD
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup STM32_ADAFRUIT_SD_Exported_Types
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SD status structure definition
|
||||||
|
*/
|
||||||
|
enum {
|
||||||
|
BSP_SD_OK = 0x00,
|
||||||
|
MSD_OK = 0x00,
|
||||||
|
BSP_SD_ERROR = 0x01,
|
||||||
|
BSP_SD_TIMEOUT
|
||||||
|
};
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
uint8_t Reserved1:2; /* Reserved */
|
||||||
|
uint16_t DeviceSize:12; /* Device Size */
|
||||||
|
uint8_t MaxRdCurrentVDDMin:3; /* Max. read current @ VDD min */
|
||||||
|
uint8_t MaxRdCurrentVDDMax:3; /* Max. read current @ VDD max */
|
||||||
|
uint8_t MaxWrCurrentVDDMin:3; /* Max. write current @ VDD min */
|
||||||
|
uint8_t MaxWrCurrentVDDMax:3; /* Max. write current @ VDD max */
|
||||||
|
uint8_t DeviceSizeMul:3; /* Device size multiplier */
|
||||||
|
} struct_v1;
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
uint8_t Reserved1:6; /* Reserved */
|
||||||
|
uint32_t DeviceSize:22; /* Device Size */
|
||||||
|
uint8_t Reserved2:1; /* Reserved */
|
||||||
|
} struct_v2;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Card Specific Data: CSD Register
|
||||||
|
*/
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
/* Header part */
|
||||||
|
uint8_t CSDStruct:2; /* CSD structure */
|
||||||
|
uint8_t Reserved1:6; /* Reserved */
|
||||||
|
uint8_t TAAC:8; /* Data read access-time 1 */
|
||||||
|
uint8_t NSAC:8; /* Data read access-time 2 in CLK cycles */
|
||||||
|
uint8_t MaxBusClkFrec:8; /* Max. bus clock frequency */
|
||||||
|
uint16_t CardComdClasses:12; /* Card command classes */
|
||||||
|
uint8_t RdBlockLen:4; /* Max. read data block length */
|
||||||
|
uint8_t PartBlockRead:1; /* Partial blocks for read allowed */
|
||||||
|
uint8_t WrBlockMisalign:1; /* Write block misalignment */
|
||||||
|
uint8_t RdBlockMisalign:1; /* Read block misalignment */
|
||||||
|
uint8_t DSRImpl:1; /* DSR implemented */
|
||||||
|
|
||||||
|
/* v1 or v2 struct */
|
||||||
|
union csd_version {
|
||||||
|
struct_v1 v1;
|
||||||
|
struct_v2 v2;
|
||||||
|
} version;
|
||||||
|
|
||||||
|
uint8_t EraseSingleBlockEnable:1; /* Erase single block enable */
|
||||||
|
uint8_t EraseSectorSize:7; /* Erase group size multiplier */
|
||||||
|
uint8_t WrProtectGrSize:7; /* Write protect group size */
|
||||||
|
uint8_t WrProtectGrEnable:1; /* Write protect group enable */
|
||||||
|
uint8_t Reserved2:2; /* Reserved */
|
||||||
|
uint8_t WrSpeedFact:3; /* Write speed factor */
|
||||||
|
uint8_t MaxWrBlockLen:4; /* Max. write data block length */
|
||||||
|
uint8_t WriteBlockPartial:1; /* Partial blocks for write allowed */
|
||||||
|
uint8_t Reserved3:5; /* Reserved */
|
||||||
|
uint8_t FileFormatGrouop:1; /* File format group */
|
||||||
|
uint8_t CopyFlag:1; /* Copy flag (OTP) */
|
||||||
|
uint8_t PermWrProtect:1; /* Permanent write protection */
|
||||||
|
uint8_t TempWrProtect:1; /* Temporary write protection */
|
||||||
|
uint8_t FileFormat:2; /* File Format */
|
||||||
|
uint8_t Reserved4:2; /* Reserved */
|
||||||
|
uint8_t crc:7; /* Reserved */
|
||||||
|
uint8_t Reserved5:1; /* always 1*/
|
||||||
|
|
||||||
|
} SD_CSD;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Card Identification Data: CID Register
|
||||||
|
*/
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
__IO uint8_t ManufacturerID; /* ManufacturerID */
|
||||||
|
__IO uint16_t OEM_AppliID; /* OEM/Application ID */
|
||||||
|
__IO uint32_t ProdName1; /* Product Name part1 */
|
||||||
|
__IO uint8_t ProdName2; /* Product Name part2*/
|
||||||
|
__IO uint8_t ProdRev; /* Product Revision */
|
||||||
|
__IO uint32_t ProdSN; /* Product Serial Number */
|
||||||
|
__IO uint8_t Reserved1; /* Reserved1 */
|
||||||
|
__IO uint16_t ManufactDate; /* Manufacturing Date */
|
||||||
|
__IO uint8_t CID_CRC; /* CID CRC */
|
||||||
|
__IO uint8_t Reserved2; /* always 1 */
|
||||||
|
} SD_CID;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SD Card information
|
||||||
|
*/
|
||||||
|
typedef struct
|
||||||
|
{
|
||||||
|
SD_CSD Csd;
|
||||||
|
SD_CID Cid;
|
||||||
|
uint32_t CardCapacity; /*!< Card Capacity */
|
||||||
|
uint32_t CardBlockSize; /*!< Card Block Size */
|
||||||
|
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
|
||||||
|
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
|
||||||
|
} SD_CardInfo;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup STM32_ADAFRUIT_SPI_SD_Exported_Constants
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Block Size
|
||||||
|
*/
|
||||||
|
#define SD_BLOCK_SIZE 0x200
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SD detection on its memory slot
|
||||||
|
*/
|
||||||
|
#define SD_PRESENT ((uint8_t)0x01)
|
||||||
|
#define SD_NOT_PRESENT ((uint8_t)0x00)
|
||||||
|
|
||||||
|
#define SD_DATATIMEOUT ((uint32_t)100000000)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SD Card information structure
|
||||||
|
*/
|
||||||
|
#define BSP_SD_CardInfo SD_CardInfo
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup STM32_ADAFRUIT_SD_Exported_Macro
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup STM32_ADAFRUIT_SD_Exported_Functions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
uint8_t BSP_SD_Init(void);
|
||||||
|
uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
|
||||||
|
uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout);
|
||||||
|
uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr);
|
||||||
|
uint8_t BSP_SD_GetCardState(void);
|
||||||
|
uint8_t BSP_SD_GetCardInfo(SD_CardInfo *pCardInfo);
|
||||||
|
|
||||||
|
/* Link functions for SD Card peripheral*/
|
||||||
|
void SD_SPI_Slow_Init(void);
|
||||||
|
void SD_SPI_Fast_Init(void);
|
||||||
|
void SD_IO_Init(void);
|
||||||
|
void SD_IO_CSState(uint8_t state);
|
||||||
|
void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
|
||||||
|
uint8_t SD_IO_WriteByte(uint8_t Data);
|
||||||
|
|
||||||
|
/* Link function for HAL delay */
|
||||||
|
void HAL_Delay(__IO uint32_t Delay);
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __STM32_ADAFRUIT_SD_H */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
138
firmware/targets/f3/Src/fatfs/syscall.c
Normal file
138
firmware/targets/f3/Src/fatfs/syscall.c
Normal file
@ -0,0 +1,138 @@
|
|||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Sample code of OS dependent controls for FatFs */
|
||||||
|
/* (C)ChaN, 2014 */
|
||||||
|
/* Portions COPYRIGHT 2017 STMicroelectronics */
|
||||||
|
/* Portions Copyright (C) 2014, ChaN, all right reserved */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* Copyright (c) 2017 STMicroelectronics. All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
**/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#include "fatfs/ff.h"
|
||||||
|
|
||||||
|
|
||||||
|
#if _FS_REENTRANT
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Create a Synchronization Object */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* This function is called in f_mount() function to create a new
|
||||||
|
/ synchronization object, such as semaphore and mutex. When a 0 is returned,
|
||||||
|
/ the f_mount() function fails with FR_INT_ERR.
|
||||||
|
*/
|
||||||
|
|
||||||
|
int ff_cre_syncobj ( /* 1:Function succeeded, 0:Could not create the sync object */
|
||||||
|
BYTE vol, /* Corresponding volume (logical drive number) */
|
||||||
|
_SYNC_t *sobj /* Pointer to return the created sync object */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
//osSemaphoreDef(SEM);
|
||||||
|
//*sobj = osSemaphoreCreate(osSemaphore(SEM), 1);
|
||||||
|
*sobj = osMutexNew(NULL);
|
||||||
|
ret = (*sobj != NULL);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Delete a Synchronization Object */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* This function is called in f_mount() function to delete a synchronization
|
||||||
|
/ object that created with ff_cre_syncobj() function. When a 0 is returned,
|
||||||
|
/ the f_mount() function fails with FR_INT_ERR.
|
||||||
|
*/
|
||||||
|
|
||||||
|
int ff_del_syncobj ( /* 1:Function succeeded, 0:Could not delete due to any error */
|
||||||
|
_SYNC_t sobj /* Sync object tied to the logical drive to be deleted */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
osMutexDelete(sobj);
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Request Grant to Access the Volume */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* This function is called on entering file functions to lock the volume.
|
||||||
|
/ When a 0 is returned, the file function fails with FR_TIMEOUT.
|
||||||
|
*/
|
||||||
|
|
||||||
|
int ff_req_grant ( /* 1:Got a grant to access the volume, 0:Could not get a grant */
|
||||||
|
_SYNC_t sobj /* Sync object to wait */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
if(osMutexAcquire(sobj, _FS_TIMEOUT) == osOK) {
|
||||||
|
ret = 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Release Grant to Access the Volume */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* This function is called on leaving file functions to unlock the volume.
|
||||||
|
*/
|
||||||
|
|
||||||
|
void ff_rel_grant (
|
||||||
|
_SYNC_t sobj /* Sync object to be signaled */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
osMutexRelease(sobj);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#if _USE_LFN == 3 /* LFN with a working buffer on the heap */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Allocate a memory block */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* If a NULL is returned, the file function fails with FR_NOT_ENOUGH_CORE.
|
||||||
|
*/
|
||||||
|
|
||||||
|
void* ff_memalloc ( /* Returns pointer to the allocated memory block */
|
||||||
|
UINT msize /* Number of bytes to allocate */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
return ff_malloc(msize); /* Allocate a new memory block with POSIX API */
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
/* Free a memory block */
|
||||||
|
/*------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
void ff_memfree (
|
||||||
|
void* mblock /* Pointer to the memory block to free */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
ff_free(mblock); /* Discard the memory block with POSIX API */
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
219
firmware/targets/f3/Src/fatfs/user_diskio.c
Normal file
219
firmware/targets/f3/Src/fatfs/user_diskio.c
Normal file
@ -0,0 +1,219 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file user_diskio.c
|
||||||
|
* @brief This file includes a diskio driver skeleton to be completed by the user.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
#ifdef USE_OBSOLETE_USER_CODE_SECTION_0
|
||||||
|
/*
|
||||||
|
* Warning: the user section 0 is no more in use (starting from CubeMx version 4.16.0)
|
||||||
|
* To be suppressed in the future.
|
||||||
|
* Kept to ensure backward compatibility with previous CubeMx versions when
|
||||||
|
* migrating projects.
|
||||||
|
* User code previously added there should be copied in the new user sections before
|
||||||
|
* the section contents can be deleted.
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* USER CODE BEGIN DECL */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "user_diskio.h"
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* Disk status */
|
||||||
|
static volatile DSTATUS Stat = STA_NOINIT;
|
||||||
|
|
||||||
|
static DSTATUS User_CheckStatus(BYTE lun) {
|
||||||
|
Stat = STA_NOINIT;
|
||||||
|
|
||||||
|
if(BSP_SD_GetCardState() == MSD_OK) {
|
||||||
|
Stat &= ~STA_NOINIT;
|
||||||
|
}
|
||||||
|
|
||||||
|
return Stat;
|
||||||
|
}
|
||||||
|
/* USER CODE END DECL */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
DSTATUS USER_initialize(BYTE pdrv);
|
||||||
|
DSTATUS USER_status(BYTE pdrv);
|
||||||
|
DRESULT USER_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
|
||||||
|
#if _USE_WRITE == 1
|
||||||
|
DRESULT USER_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
|
||||||
|
#endif /* _USE_WRITE == 1 */
|
||||||
|
#if _USE_IOCTL == 1
|
||||||
|
DRESULT USER_ioctl(BYTE pdrv, BYTE cmd, void* buff);
|
||||||
|
#endif /* _USE_IOCTL == 1 */
|
||||||
|
|
||||||
|
Diskio_drvTypeDef USER_Driver = {
|
||||||
|
USER_initialize,
|
||||||
|
USER_status,
|
||||||
|
USER_read,
|
||||||
|
#if _USE_WRITE
|
||||||
|
USER_write,
|
||||||
|
#endif /* _USE_WRITE == 1 */
|
||||||
|
#if _USE_IOCTL == 1
|
||||||
|
USER_ioctl,
|
||||||
|
#endif /* _USE_IOCTL == 1 */
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Private functions ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Initializes a Drive
|
||||||
|
* @param pdrv: Physical drive number (0..)
|
||||||
|
* @retval DSTATUS: Operation status
|
||||||
|
*/
|
||||||
|
DSTATUS USER_initialize(BYTE pdrv /* Physical drive nmuber to identify the drive */
|
||||||
|
) {
|
||||||
|
/* USER CODE BEGIN INIT */
|
||||||
|
return User_CheckStatus(pdrv);
|
||||||
|
/* USER CODE END INIT */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Gets Disk Status
|
||||||
|
* @param pdrv: Physical drive number (0..)
|
||||||
|
* @retval DSTATUS: Operation status
|
||||||
|
*/
|
||||||
|
DSTATUS USER_status(BYTE pdrv /* Physical drive number to identify the drive */
|
||||||
|
) {
|
||||||
|
/* USER CODE BEGIN STATUS */
|
||||||
|
return Stat;
|
||||||
|
/* USER CODE END STATUS */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Reads Sector(s)
|
||||||
|
* @param pdrv: Physical drive number (0..)
|
||||||
|
* @param *buff: Data buffer to store read data
|
||||||
|
* @param sector: Sector address (LBA)
|
||||||
|
* @param count: Number of sectors to read (1..128)
|
||||||
|
* @retval DRESULT: Operation result
|
||||||
|
*/
|
||||||
|
DRESULT USER_read(
|
||||||
|
BYTE pdrv, /* Physical drive nmuber to identify the drive */
|
||||||
|
BYTE* buff, /* Data buffer to store read data */
|
||||||
|
DWORD sector, /* Sector address in LBA */
|
||||||
|
UINT count /* Number of sectors to read */
|
||||||
|
) {
|
||||||
|
/* USER CODE BEGIN READ */
|
||||||
|
DRESULT res = RES_ERROR;
|
||||||
|
if(BSP_SD_ReadBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
|
||||||
|
/* wait until the read operation is finished */
|
||||||
|
while(BSP_SD_GetCardState() != MSD_OK) {
|
||||||
|
}
|
||||||
|
res = RES_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
return res;
|
||||||
|
/* USER CODE END READ */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Writes Sector(s)
|
||||||
|
* @param pdrv: Physical drive number (0..)
|
||||||
|
* @param *buff: Data to be written
|
||||||
|
* @param sector: Sector address (LBA)
|
||||||
|
* @param count: Number of sectors to write (1..128)
|
||||||
|
* @retval DRESULT: Operation result
|
||||||
|
*/
|
||||||
|
#if _USE_WRITE == 1
|
||||||
|
DRESULT USER_write(
|
||||||
|
BYTE pdrv, /* Physical drive nmuber to identify the drive */
|
||||||
|
const BYTE* buff, /* Data to be written */
|
||||||
|
DWORD sector, /* Sector address in LBA */
|
||||||
|
UINT count /* Number of sectors to write */
|
||||||
|
) {
|
||||||
|
/* USER CODE BEGIN WRITE */
|
||||||
|
/* USER CODE HERE */
|
||||||
|
DRESULT res = RES_ERROR;
|
||||||
|
|
||||||
|
if(BSP_SD_WriteBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
|
||||||
|
/* wait until the Write operation is finished */
|
||||||
|
while(BSP_SD_GetCardState() != MSD_OK) {
|
||||||
|
}
|
||||||
|
res = RES_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
return res;
|
||||||
|
/* USER CODE END WRITE */
|
||||||
|
}
|
||||||
|
#endif /* _USE_WRITE == 1 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief I/O control operation
|
||||||
|
* @param pdrv: Physical drive number (0..)
|
||||||
|
* @param cmd: Control code
|
||||||
|
* @param *buff: Buffer to send/receive control data
|
||||||
|
* @retval DRESULT: Operation result
|
||||||
|
*/
|
||||||
|
#if _USE_IOCTL == 1
|
||||||
|
DRESULT USER_ioctl(
|
||||||
|
BYTE pdrv, /* Physical drive nmuber (0..) */
|
||||||
|
BYTE cmd, /* Control code */
|
||||||
|
void* buff /* Buffer to send/receive control data */
|
||||||
|
) {
|
||||||
|
/* USER CODE BEGIN IOCTL */
|
||||||
|
DRESULT res = RES_ERROR;
|
||||||
|
BSP_SD_CardInfo CardInfo;
|
||||||
|
|
||||||
|
if(Stat & STA_NOINIT) return RES_NOTRDY;
|
||||||
|
|
||||||
|
switch(cmd) {
|
||||||
|
/* Make sure that no pending write process */
|
||||||
|
case CTRL_SYNC:
|
||||||
|
res = RES_OK;
|
||||||
|
break;
|
||||||
|
|
||||||
|
/* Get number of sectors on the disk (DWORD) */
|
||||||
|
case GET_SECTOR_COUNT:
|
||||||
|
BSP_SD_GetCardInfo(&CardInfo);
|
||||||
|
*(DWORD*)buff = CardInfo.LogBlockNbr;
|
||||||
|
res = RES_OK;
|
||||||
|
break;
|
||||||
|
|
||||||
|
/* Get R/W sector size (WORD) */
|
||||||
|
case GET_SECTOR_SIZE:
|
||||||
|
BSP_SD_GetCardInfo(&CardInfo);
|
||||||
|
*(WORD*)buff = CardInfo.LogBlockSize;
|
||||||
|
res = RES_OK;
|
||||||
|
break;
|
||||||
|
|
||||||
|
/* Get erase block size in unit of sector (DWORD) */
|
||||||
|
case GET_BLOCK_SIZE:
|
||||||
|
BSP_SD_GetCardInfo(&CardInfo);
|
||||||
|
*(DWORD*)buff = CardInfo.LogBlockSize;
|
||||||
|
res = RES_OK;
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
res = RES_PARERR;
|
||||||
|
}
|
||||||
|
|
||||||
|
return res;
|
||||||
|
/* USER CODE END IOCTL */
|
||||||
|
}
|
||||||
|
#endif /* _USE_IOCTL == 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
48
firmware/targets/f3/Src/fatfs/user_diskio.h
Normal file
48
firmware/targets/f3/Src/fatfs/user_diskio.h
Normal file
@ -0,0 +1,48 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file user_diskio.h
|
||||||
|
* @brief This file contains the common defines and functions prototypes for
|
||||||
|
* the user_diskio driver.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||||
|
#ifndef __USER_DISKIO_H
|
||||||
|
#define __USER_DISKIO_H
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32_adafruit_sd.h"
|
||||||
|
#include "fatfs/ff_gen_drv.h"
|
||||||
|
/* Exported types ------------------------------------------------------------*/
|
||||||
|
/* Exported constants --------------------------------------------------------*/
|
||||||
|
/* Exported functions ------------------------------------------------------- */
|
||||||
|
extern Diskio_drvTypeDef USER_Driver;
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __USER_DISKIO_H */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
21
firmware/targets/f3/Src/freertos-openocd.c
Normal file
21
firmware/targets/f3/Src/freertos-openocd.c
Normal file
@ -0,0 +1,21 @@
|
|||||||
|
|
||||||
|
/*
|
||||||
|
* Since at least FreeRTOS V7.5.3 uxTopUsedPriority is no longer
|
||||||
|
* present in the kernel, so it has to be supplied by other means for
|
||||||
|
* OpenOCD's threads awareness.
|
||||||
|
*
|
||||||
|
* Add this file to your project, and, if you're using --gc-sections,
|
||||||
|
* ``--undefined=uxTopUsedPriority'' (or
|
||||||
|
* ``-Wl,--undefined=uxTopUsedPriority'' when using gcc for final
|
||||||
|
* linking) to your LDFLAGS; same with all the other symbols you need.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "FreeRTOS.h"
|
||||||
|
|
||||||
|
#ifdef __GNUC__
|
||||||
|
#define USED __attribute__((used))
|
||||||
|
#else
|
||||||
|
#define USED
|
||||||
|
#endif
|
||||||
|
|
||||||
|
const int USED uxTopUsedPriority = configMAX_PRIORITIES - 1;
|
190
firmware/targets/f3/Src/gpio.c
Normal file
190
firmware/targets/f3/Src/gpio.c
Normal file
@ -0,0 +1,190 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : gpio.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of all used GPIO pins.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "gpio.h"
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------*/
|
||||||
|
/* Configure GPIO */
|
||||||
|
/*----------------------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/** Configure pins as
|
||||||
|
* Analog
|
||||||
|
* Input
|
||||||
|
* Output
|
||||||
|
* EVENT_OUT
|
||||||
|
* EXTI
|
||||||
|
*/
|
||||||
|
void MX_GPIO_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
|
||||||
|
/* GPIO Ports Clock Enable */
|
||||||
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOE_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(GPIOA, LED_RED_Pin|LED_GREEN_Pin|LED_BLUE_Pin, GPIO_PIN_SET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(DISPLAY_RST_GPIO_Port, DISPLAY_RST_Pin, GPIO_PIN_RESET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(NFC_CS_GPIO_Port, NFC_CS_Pin, GPIO_PIN_SET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(DISPLAY_DI_GPIO_Port, DISPLAY_DI_Pin, GPIO_PIN_RESET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin, GPIO_PIN_RESET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(GPIOC, DISPLAY_CS_Pin|SD_CS_Pin, GPIO_PIN_SET);
|
||||||
|
|
||||||
|
/*Configure GPIO pin Output Level */
|
||||||
|
HAL_GPIO_WritePin(CC1101_CS_GPIO_Port, CC1101_CS_Pin, GPIO_PIN_SET);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PCPin PCPin */
|
||||||
|
GPIO_InitStruct.Pin = BUTTON_BACK_Pin|BUTTON_OK_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = BOOT0_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(BOOT0_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PCPin PCPin PCPin PCPin */
|
||||||
|
GPIO_InitStruct.Pin = PC0_Pin|PC1_Pin|PC3_Pin|PC10_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PAPin PAPin PAPin */
|
||||||
|
GPIO_InitStruct.Pin = LED_RED_Pin|LED_GREEN_Pin|LED_BLUE_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PAPin PAPin PAPin PAPin */
|
||||||
|
GPIO_InitStruct.Pin = PA4_Pin|PA5_Pin|PA6_Pin|PA7_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = RFID_PULL_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(RFID_PULL_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = CC1101_G0_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(CC1101_G0_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PBPin PBPin */
|
||||||
|
GPIO_InitStruct.Pin = PB2_Pin|iBTN_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PBPin PBPin PBPin PBPin */
|
||||||
|
GPIO_InitStruct.Pin = BUTTON_UP_Pin|BUTTON_LEFT_Pin|BUTTON_DOWN_Pin|BUTTON_RIGHT_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = DISPLAY_RST_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(DISPLAY_RST_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = NFC_CS_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
HAL_GPIO_Init(NFC_CS_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pins : PCPin PCPin */
|
||||||
|
GPIO_InitStruct.Pin = DISPLAY_DI_Pin|DISPLAY_CS_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = DISPLAY_BACKLIGHT_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
HAL_GPIO_Init(DISPLAY_BACKLIGHT_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = SD_CS_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
HAL_GPIO_Init(SD_CS_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/*Configure GPIO pin : PtPin */
|
||||||
|
GPIO_InitStruct.Pin = CC1101_CS_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
HAL_GPIO_Init(CC1101_CS_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* EXTI interrupt init*/
|
||||||
|
HAL_NVIC_SetPriority(EXTI1_IRQn, 5, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(EXTI1_IRQn);
|
||||||
|
|
||||||
|
HAL_NVIC_SetPriority(EXTI2_IRQn, 5, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(EXTI2_IRQn);
|
||||||
|
|
||||||
|
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 5, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
|
||||||
|
|
||||||
|
HAL_NVIC_SetPriority(EXTI15_10_IRQn, 5, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
120
firmware/targets/f3/Src/i2c.c
Normal file
120
firmware/targets/f3/Src/i2c.c
Normal file
@ -0,0 +1,120 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : I2C.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the I2C instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "i2c.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
I2C_HandleTypeDef hi2c1;
|
||||||
|
|
||||||
|
/* I2C1 init function */
|
||||||
|
void MX_I2C1_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
hi2c1.Instance = I2C1;
|
||||||
|
hi2c1.Init.Timing = 0x10707DBC;
|
||||||
|
hi2c1.Init.OwnAddress1 = 0;
|
||||||
|
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
||||||
|
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
||||||
|
hi2c1.Init.OwnAddress2 = 0;
|
||||||
|
hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
|
||||||
|
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
||||||
|
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
||||||
|
if (HAL_I2C_Init(&hi2c1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Configure Analogue filter
|
||||||
|
*/
|
||||||
|
if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Configure Digital filter
|
||||||
|
*/
|
||||||
|
if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_I2C_MspInit(I2C_HandleTypeDef* i2cHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(i2cHandle->Instance==I2C1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN I2C1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**I2C1 GPIO Configuration
|
||||||
|
PA9 ------> I2C1_SCL
|
||||||
|
PA10 ------> I2C1_SDA
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = I2C_SCL_Pin|I2C_SDA_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* I2C1 clock enable */
|
||||||
|
__HAL_RCC_I2C1_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN I2C1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* i2cHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(i2cHandle->Instance==I2C1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN I2C1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_I2C1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**I2C1 GPIO Configuration
|
||||||
|
PA9 ------> I2C1_SCL
|
||||||
|
PA10 ------> I2C1_SDA
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(I2C_SCL_GPIO_Port, I2C_SCL_Pin);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(I2C_SDA_GPIO_Port, I2C_SDA_Pin);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN I2C1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END I2C1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
272
firmware/targets/f3/Src/main.c
Normal file
272
firmware/targets/f3/Src/main.c
Normal file
@ -0,0 +1,272 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : main.c
|
||||||
|
* @brief : Main program body
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
#include "cmsis_os.h"
|
||||||
|
#include "adc.h"
|
||||||
|
#include "comp.h"
|
||||||
|
#include "i2c.h"
|
||||||
|
#include "rf.h"
|
||||||
|
#include "rtc.h"
|
||||||
|
#include "spi.h"
|
||||||
|
#include "tim.h"
|
||||||
|
#include "usart.h"
|
||||||
|
#include "usb_device.h"
|
||||||
|
#include "gpio.h"
|
||||||
|
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
#include "fatfs/fatfs.h"
|
||||||
|
#include "api-hal.h"
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PTD */
|
||||||
|
|
||||||
|
/* USER CODE END PTD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PD */
|
||||||
|
/* USER CODE END PD */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PM */
|
||||||
|
|
||||||
|
/* USER CODE END PM */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
void SystemClock_Config(void);
|
||||||
|
void MX_FREERTOS_Init(void);
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* Private user code ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief The application entry point.
|
||||||
|
* @retval int
|
||||||
|
*/
|
||||||
|
int main(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/* MCU Configuration--------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||||
|
HAL_Init();
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Init */
|
||||||
|
/* USER CODE END Init */
|
||||||
|
|
||||||
|
/* Configure the system clock */
|
||||||
|
SystemClock_Config();
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SysInit */
|
||||||
|
|
||||||
|
/* USER CODE END SysInit */
|
||||||
|
|
||||||
|
/* Initialize all configured peripherals */
|
||||||
|
MX_GPIO_Init();
|
||||||
|
MX_ADC1_Init();
|
||||||
|
MX_I2C1_Init();
|
||||||
|
MX_RTC_Init();
|
||||||
|
MX_SPI1_Init();
|
||||||
|
MX_SPI2_Init();
|
||||||
|
MX_USART1_UART_Init();
|
||||||
|
MX_USB_Device_Init();
|
||||||
|
MX_TIM1_Init();
|
||||||
|
MX_TIM2_Init();
|
||||||
|
MX_TIM16_Init();
|
||||||
|
MX_COMP1_Init();
|
||||||
|
MX_RF_Init();
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
MX_FATFS_Init();
|
||||||
|
delay_us_init_DWT();
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
|
||||||
|
/* Init scheduler */
|
||||||
|
osKernelInitialize(); /* Call init function for freertos objects (in freertos.c) */
|
||||||
|
MX_FREERTOS_Init();
|
||||||
|
/* Start scheduler */
|
||||||
|
osKernelStart();
|
||||||
|
|
||||||
|
/* We should never get here as control is now taken by the scheduler */
|
||||||
|
/* Infinite loop */
|
||||||
|
/* USER CODE BEGIN WHILE */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE END WHILE */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 3 */
|
||||||
|
}
|
||||||
|
/* USER CODE END 3 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||||
|
|
||||||
|
/** Configure LSE Drive Capability
|
||||||
|
*/
|
||||||
|
HAL_PWR_EnableBkUpAccess();
|
||||||
|
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
|
||||||
|
/** Configure the main internal regulator output voltage
|
||||||
|
*/
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
/** Initializes the RCC Oscillators according to the specified parameters
|
||||||
|
* in the RCC_OscInitTypeDef structure.
|
||||||
|
*/
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE
|
||||||
|
|RCC_OSCILLATORTYPE_LSE;
|
||||||
|
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||||
|
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||||
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||||
|
RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV2;
|
||||||
|
RCC_OscInitStruct.PLL.PLLN = 8;
|
||||||
|
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||||
|
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||||||
|
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
|
||||||
|
*/
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK4|RCC_CLOCKTYPE_HCLK2
|
||||||
|
|RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||||
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.AHBCLK2Divider = RCC_SYSCLK_DIV2;
|
||||||
|
RCC_ClkInitStruct.AHBCLK4Divider = RCC_SYSCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Initializes the peripherals clocks
|
||||||
|
*/
|
||||||
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RFWAKEUP
|
||||||
|
|RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1
|
||||||
|
|RCC_PERIPHCLK_I2C1|RCC_PERIPHCLK_USB
|
||||||
|
|RCC_PERIPHCLK_ADC;
|
||||||
|
PeriphClkInitStruct.PLLSAI1.PLLN = 6;
|
||||||
|
PeriphClkInitStruct.PLLSAI1.PLLP = RCC_PLLP_DIV2;
|
||||||
|
PeriphClkInitStruct.PLLSAI1.PLLQ = RCC_PLLQ_DIV2;
|
||||||
|
PeriphClkInitStruct.PLLSAI1.PLLR = RCC_PLLR_DIV2;
|
||||||
|
PeriphClkInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_USBCLK|RCC_PLLSAI1_ADCCLK;
|
||||||
|
PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
||||||
|
PeriphClkInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
|
||||||
|
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
|
||||||
|
PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
|
||||||
|
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
|
||||||
|
PeriphClkInitStruct.RFWakeUpClockSelection = RCC_RFWKPCLKSOURCE_HSE_DIV1024;
|
||||||
|
PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSE;
|
||||||
|
PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN Smps */
|
||||||
|
|
||||||
|
/* USER CODE END Smps */
|
||||||
|
/** Enables the Clock Security System
|
||||||
|
*/
|
||||||
|
HAL_RCC_EnableCSS();
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 4 */
|
||||||
|
|
||||||
|
/* USER CODE END 4 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Period elapsed callback in non blocking mode
|
||||||
|
* @note This function is called when TIM17 interrupt took place, inside
|
||||||
|
* HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
|
||||||
|
* a global variable "uwTick" used as application time base.
|
||||||
|
* @param htim : TIM handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN Callback 0 */
|
||||||
|
|
||||||
|
/* USER CODE END Callback 0 */
|
||||||
|
if (htim->Instance == TIM17) {
|
||||||
|
HAL_IncTick();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN Callback 1 */
|
||||||
|
|
||||||
|
/* USER CODE END Callback 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function is executed in case of error occurrence.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void Error_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN Error_Handler_Debug */
|
||||||
|
/* User can add his own implementation to report the HAL error return state */
|
||||||
|
|
||||||
|
/* USER CODE END Error_Handler_Debug */
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef USE_FULL_ASSERT
|
||||||
|
/**
|
||||||
|
* @brief Reports the name of the source file and the source line number
|
||||||
|
* where the assert_param error has occurred.
|
||||||
|
* @param file: pointer to the source file name
|
||||||
|
* @param line: assert_param error line source number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void assert_failed(uint8_t *file, uint32_t line)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 6 */
|
||||||
|
/* User can add his own implementation to report the file name and line number,
|
||||||
|
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||||
|
/* USER CODE END 6 */
|
||||||
|
}
|
||||||
|
#endif /* USE_FULL_ASSERT */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
37
firmware/targets/f3/Src/rf.c
Normal file
37
firmware/targets/f3/Src/rf.c
Normal file
@ -0,0 +1,37 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : RF.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the RF instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "rf.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/* RF init function */
|
||||||
|
void MX_RF_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
116
firmware/targets/f3/Src/rtc.c
Normal file
116
firmware/targets/f3/Src/rtc.c
Normal file
@ -0,0 +1,116 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : RTC.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the RTC instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "rtc.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
RTC_HandleTypeDef hrtc;
|
||||||
|
|
||||||
|
/* RTC init function */
|
||||||
|
void MX_RTC_Init(void)
|
||||||
|
{
|
||||||
|
RTC_TimeTypeDef sTime = {0};
|
||||||
|
RTC_DateTypeDef sDate = {0};
|
||||||
|
|
||||||
|
/** Initialize RTC Only
|
||||||
|
*/
|
||||||
|
hrtc.Instance = RTC;
|
||||||
|
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
|
||||||
|
hrtc.Init.AsynchPrediv = 127;
|
||||||
|
hrtc.Init.SynchPrediv = 255;
|
||||||
|
hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
|
||||||
|
hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
|
||||||
|
hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
|
||||||
|
hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
|
||||||
|
if (HAL_RTC_Init(&hrtc) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Check_RTC_BKUP */
|
||||||
|
|
||||||
|
/* USER CODE END Check_RTC_BKUP */
|
||||||
|
|
||||||
|
/** Initialize RTC and set the Time and Date
|
||||||
|
*/
|
||||||
|
sTime.Hours = 0x0;
|
||||||
|
sTime.Minutes = 0x0;
|
||||||
|
sTime.Seconds = 0x0;
|
||||||
|
sTime.SubSeconds = 0x0;
|
||||||
|
sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
|
||||||
|
sTime.StoreOperation = RTC_STOREOPERATION_RESET;
|
||||||
|
if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sDate.WeekDay = RTC_WEEKDAY_MONDAY;
|
||||||
|
sDate.Month = RTC_MONTH_JANUARY;
|
||||||
|
sDate.Date = 0x1;
|
||||||
|
sDate.Year = 0x0;
|
||||||
|
|
||||||
|
if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_RTC_MspInit(RTC_HandleTypeDef* rtcHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(rtcHandle->Instance==RTC)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN RTC_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspInit 0 */
|
||||||
|
/* RTC clock enable */
|
||||||
|
__HAL_RCC_RTC_ENABLE();
|
||||||
|
__HAL_RCC_RTCAPB_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN RTC_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* rtcHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(rtcHandle->Instance==RTC)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN RTC_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_RTC_DISABLE();
|
||||||
|
__HAL_RCC_RTCAPB_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN RTC_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END RTC_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
290
firmware/targets/f3/Src/spi.c
Normal file
290
firmware/targets/f3/Src/spi.c
Normal file
@ -0,0 +1,290 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : SPI.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the SPI instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "spi.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
SPI_HandleTypeDef hspi1;
|
||||||
|
SPI_HandleTypeDef hspi2;
|
||||||
|
|
||||||
|
/* SPI1 init function */
|
||||||
|
void MX_SPI1_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
hspi1.Instance = SPI1;
|
||||||
|
hspi1.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
|
||||||
|
hspi1.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
||||||
|
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
hspi1.Init.CRCPolynomial = 7;
|
||||||
|
hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||||
|
hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
|
||||||
|
if (HAL_SPI_Init(&hspi1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
/* SPI2 init function */
|
||||||
|
void MX_SPI2_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
hspi2.Instance = SPI2;
|
||||||
|
hspi2.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||||
|
hspi2.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
||||||
|
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
hspi2.Init.CRCPolynomial = 7;
|
||||||
|
hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||||
|
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
||||||
|
if (HAL_SPI_Init(&hspi2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(spiHandle->Instance==SPI1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI1_MspInit 0 */
|
||||||
|
/* SPI1 clock enable */
|
||||||
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**SPI1 GPIO Configuration
|
||||||
|
PB3 ------> SPI1_SCK
|
||||||
|
PB4 ------> SPI1_MISO
|
||||||
|
PB5 ------> SPI1_MOSI
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = SPI_R_SCK_Pin|SPI_R_MISO_Pin|SPI_R_MOSI_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
||||||
|
|
||||||
|
// SD Card need faster spi gpio
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE END SPI1_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(spiHandle->Instance==SPI2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspInit 0 */
|
||||||
|
/* SPI2 clock enable */
|
||||||
|
__HAL_RCC_SPI2_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||||
|
/**SPI2 GPIO Configuration
|
||||||
|
PB15 ------> SPI2_MOSI
|
||||||
|
PD1 ------> SPI2_SCK
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = SPI_D_MOSI_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||||
|
HAL_GPIO_Init(SPI_D_MOSI_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = SPI_D_SCK_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||||
|
HAL_GPIO_Init(SPI_D_SCK_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(spiHandle->Instance==SPI1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_SPI1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**SPI1 GPIO Configuration
|
||||||
|
PB3 ------> SPI1_SCK
|
||||||
|
PB4 ------> SPI1_MISO
|
||||||
|
PB5 ------> SPI1_MOSI
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOB, SPI_R_SCK_Pin|SPI_R_MISO_Pin|SPI_R_MOSI_Pin);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(spiHandle->Instance==SPI2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_SPI2_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**SPI2 GPIO Configuration
|
||||||
|
PB15 ------> SPI2_MOSI
|
||||||
|
PD1 ------> SPI2_SCK
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(SPI_D_MOSI_GPIO_Port, SPI_D_MOSI_Pin);
|
||||||
|
|
||||||
|
HAL_GPIO_DeInit(SPI_D_SCK_GPIO_Port, SPI_D_SCK_Pin);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END SPI2_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
void NFC_SPI_Reconfigure() {
|
||||||
|
if (HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
SPI_R.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
SPI_R.Init.CLKPhase = SPI_PHASE_2EDGE;
|
||||||
|
SPI_R.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8; // 8mhz, 10mhz is max
|
||||||
|
SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
SPI_R.Init.CRCPolynomial = 7;
|
||||||
|
SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||||
|
SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
|
||||||
|
|
||||||
|
if (HAL_SPI_Init(&SPI_R) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void SD_SPI_Reconfigure_Slow(void) {
|
||||||
|
if (HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||||
|
SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
|
||||||
|
SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
SPI_SD_HANDLE.Init.CRCPolynomial = 7;
|
||||||
|
SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||||
|
SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
||||||
|
|
||||||
|
if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void SD_SPI_Reconfigure_Fast(void) {
|
||||||
|
if(HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||||
|
SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
||||||
|
SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
SPI_SD_HANDLE.Init.CRCPolynomial = 7;
|
||||||
|
SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||||
|
SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
||||||
|
|
||||||
|
if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void CC1101_SPI_Reconfigure(void) {
|
||||||
|
if(HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
SPI_R.Init.Mode = SPI_MODE_MASTER;
|
||||||
|
SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
|
||||||
|
SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||||
|
SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||||
|
SPI_R.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||||
|
SPI_R.Init.NSS = SPI_NSS_SOFT;
|
||||||
|
SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
|
||||||
|
SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||||
|
SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||||
|
SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||||
|
SPI_R.Init.CRCPolynomial = 7;
|
||||||
|
SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||||
|
SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
|
||||||
|
|
||||||
|
if(HAL_SPI_Init(&SPI_R) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
88
firmware/targets/f3/Src/stm32wbxx_hal_msp.c
Normal file
88
firmware/targets/f3/Src/stm32wbxx_hal_msp.c
Normal file
@ -0,0 +1,88 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : stm32wbxx_hal_msp.c
|
||||||
|
* Description : This file provides code for the MSP Initialization
|
||||||
|
* and de-Initialization codes.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN TD */
|
||||||
|
|
||||||
|
/* USER CODE END TD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Define */
|
||||||
|
|
||||||
|
/* USER CODE END Define */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Macro */
|
||||||
|
|
||||||
|
/* USER CODE END Macro */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* External functions --------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN ExternalFunctions */
|
||||||
|
|
||||||
|
/* USER CODE END ExternalFunctions */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
/**
|
||||||
|
* Initializes the Global MSP.
|
||||||
|
*/
|
||||||
|
void HAL_MspInit(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* System interrupt init*/
|
||||||
|
|
||||||
|
/* Peripheral interrupt init */
|
||||||
|
/* HSEM_IRQn interrupt configuration */
|
||||||
|
HAL_NVIC_SetPriority(HSEM_IRQn, 5, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(HSEM_IRQn);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END MspInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
112
firmware/targets/f3/Src/stm32wbxx_hal_timebase_tim.c
Normal file
112
firmware/targets/f3/Src/stm32wbxx_hal_timebase_tim.c
Normal file
@ -0,0 +1,112 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32wbxx_hal_timebase_TIM.c
|
||||||
|
* @brief HAL time base based on the hardware TIM.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32wbxx_hal.h"
|
||||||
|
#include "stm32wbxx_hal_tim.h"
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
TIM_HandleTypeDef htim17;
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* Private functions ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function configures the TIM17 as a time base source.
|
||||||
|
* The time source is configured to have 1ms time base with a dedicated
|
||||||
|
* Tick interrupt priority.
|
||||||
|
* @note This function is called automatically at the beginning of program after
|
||||||
|
* reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
|
||||||
|
* @param TickPriority: Tick interrupt priority.
|
||||||
|
* @retval HAL status
|
||||||
|
*/
|
||||||
|
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
|
||||||
|
{
|
||||||
|
RCC_ClkInitTypeDef clkconfig;
|
||||||
|
uint32_t uwTimclock = 0;
|
||||||
|
uint32_t uwPrescalerValue = 0;
|
||||||
|
uint32_t pFLatency;
|
||||||
|
/*Configure the TIM17 IRQ priority */
|
||||||
|
HAL_NVIC_SetPriority(TIM1_TRG_COM_TIM17_IRQn, TickPriority ,0);
|
||||||
|
|
||||||
|
/* Enable the TIM17 global Interrupt */
|
||||||
|
HAL_NVIC_EnableIRQ(TIM1_TRG_COM_TIM17_IRQn);
|
||||||
|
/* Enable TIM17 clock */
|
||||||
|
__HAL_RCC_TIM17_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* Get clock configuration */
|
||||||
|
HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
|
||||||
|
|
||||||
|
/* Compute TIM17 clock */
|
||||||
|
uwTimclock = HAL_RCC_GetPCLK2Freq();
|
||||||
|
|
||||||
|
/* Compute the prescaler value to have TIM17 counter clock equal to 1MHz */
|
||||||
|
uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000) - 1);
|
||||||
|
|
||||||
|
/* Initialize TIM17 */
|
||||||
|
htim17.Instance = TIM17;
|
||||||
|
|
||||||
|
/* Initialize TIMx peripheral as follow:
|
||||||
|
+ Period = [(TIM17CLK/1000) - 1]. to have a (1/1000) s time base.
|
||||||
|
+ Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
|
||||||
|
+ ClockDivision = 0
|
||||||
|
+ Counter direction = Up
|
||||||
|
*/
|
||||||
|
htim17.Init.Period = (1000000 / 1000) - 1;
|
||||||
|
htim17.Init.Prescaler = uwPrescalerValue;
|
||||||
|
htim17.Init.ClockDivision = 0;
|
||||||
|
htim17.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
if(HAL_TIM_Base_Init(&htim17) == HAL_OK)
|
||||||
|
{
|
||||||
|
/* Start the TIM time Base generation in interrupt mode */
|
||||||
|
return HAL_TIM_Base_Start_IT(&htim17);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Return function status */
|
||||||
|
return HAL_ERROR;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Suspend Tick increment.
|
||||||
|
* @note Disable the tick increment by disabling TIM17 update interrupt.
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_SuspendTick(void)
|
||||||
|
{
|
||||||
|
/* Disable TIM17 update Interrupt */
|
||||||
|
__HAL_TIM_DISABLE_IT(&htim17, TIM_IT_UPDATE);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Resume Tick increment.
|
||||||
|
* @note Enable the tick increment by Enabling TIM17 update interrupt.
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void HAL_ResumeTick(void)
|
||||||
|
{
|
||||||
|
/* Enable TIM17 Update interrupt */
|
||||||
|
__HAL_TIM_ENABLE_IT(&htim17, TIM_IT_UPDATE);
|
||||||
|
}
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
286
firmware/targets/f3/Src/stm32wbxx_it.c
Normal file
286
firmware/targets/f3/Src/stm32wbxx_it.c
Normal file
@ -0,0 +1,286 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file stm32wbxx_it.c
|
||||||
|
* @brief Interrupt Service Routines.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "main.h"
|
||||||
|
#include "stm32wbxx_it.h"
|
||||||
|
/* Private includes ----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN TD */
|
||||||
|
|
||||||
|
/* USER CODE END TD */
|
||||||
|
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PD */
|
||||||
|
|
||||||
|
/* USER CODE END PD */
|
||||||
|
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PM */
|
||||||
|
|
||||||
|
/* USER CODE END PM */
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* Private user code ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/* External variables --------------------------------------------------------*/
|
||||||
|
extern PCD_HandleTypeDef hpcd_USB_FS;
|
||||||
|
extern TIM_HandleTypeDef htim1;
|
||||||
|
extern TIM_HandleTypeDef htim2;
|
||||||
|
extern TIM_HandleTypeDef htim17;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EV */
|
||||||
|
|
||||||
|
/* USER CODE END EV */
|
||||||
|
|
||||||
|
/******************************************************************************/
|
||||||
|
/* Cortex Processor Interruption and Exception Handlers */
|
||||||
|
/******************************************************************************/
|
||||||
|
/**
|
||||||
|
* @brief This function handles Non maskable interrupt.
|
||||||
|
*/
|
||||||
|
void NMI_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||||
|
HAL_RCC_NMI_IRQHandler();
|
||||||
|
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Hard fault interrupt.
|
||||||
|
*/
|
||||||
|
void HardFault_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HardFault_IRQn 0 */
|
||||||
|
if ((*(volatile uint32_t *)CoreDebug_BASE) & (1 << 0)) {
|
||||||
|
__asm("bkpt 1");
|
||||||
|
}
|
||||||
|
/* USER CODE END HardFault_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
|
||||||
|
/* USER CODE END W1_HardFault_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Memory management fault.
|
||||||
|
*/
|
||||||
|
void MemManage_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||||
|
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Prefetch fault, memory access fault.
|
||||||
|
*/
|
||||||
|
void BusFault_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END BusFault_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||||
|
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Undefined instruction or illegal state.
|
||||||
|
*/
|
||||||
|
void UsageFault_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END UsageFault_IRQn 0 */
|
||||||
|
while (1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||||
|
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles Debug monitor.
|
||||||
|
*/
|
||||||
|
void DebugMon_Handler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||||
|
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/******************************************************************************/
|
||||||
|
/* STM32WBxx Peripheral Interrupt Handlers */
|
||||||
|
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||||
|
/* For the available peripheral interrupt handler names, */
|
||||||
|
/* please refer to the startup file (startup_stm32wbxx.s). */
|
||||||
|
/******************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles EXTI line1 interrupt.
|
||||||
|
*/
|
||||||
|
void EXTI1_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN EXTI1_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI1_IRQn 0 */
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_1);
|
||||||
|
/* USER CODE BEGIN EXTI1_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI1_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles EXTI line2 interrupt.
|
||||||
|
*/
|
||||||
|
void EXTI2_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN EXTI2_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI2_IRQn 0 */
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_2);
|
||||||
|
/* USER CODE BEGIN EXTI2_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI2_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles USB low priority interrupt, USB wake-up interrupt through EXTI line 28.
|
||||||
|
*/
|
||||||
|
void USB_LP_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_LP_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_LP_IRQn 0 */
|
||||||
|
HAL_PCD_IRQHandler(&hpcd_USB_FS);
|
||||||
|
/* USER CODE BEGIN USB_LP_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_LP_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles EXTI line[9:5] interrupts.
|
||||||
|
*/
|
||||||
|
void EXTI9_5_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN EXTI9_5_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI9_5_IRQn 0 */
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_8);
|
||||||
|
/* USER CODE BEGIN EXTI9_5_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI9_5_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles TIM1 trigger and commutation interrupts and TIM17 global interrupt.
|
||||||
|
*/
|
||||||
|
void TIM1_TRG_COM_TIM17_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM1_TRG_COM_TIM17_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_TRG_COM_TIM17_IRQn 0 */
|
||||||
|
HAL_TIM_IRQHandler(&htim1);
|
||||||
|
HAL_TIM_IRQHandler(&htim17);
|
||||||
|
/* USER CODE BEGIN TIM1_TRG_COM_TIM17_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_TRG_COM_TIM17_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles TIM2 global interrupt.
|
||||||
|
*/
|
||||||
|
void TIM2_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_IRQn 0 */
|
||||||
|
HAL_TIM_IRQHandler(&htim2);
|
||||||
|
/* USER CODE BEGIN TIM2_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles EXTI line[15:10] interrupts.
|
||||||
|
*/
|
||||||
|
void EXTI15_10_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN EXTI15_10_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI15_10_IRQn 0 */
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_10);
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_11);
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_12);
|
||||||
|
HAL_GPIO_EXTI_IRQHandler(GPIO_PIN_13);
|
||||||
|
/* USER CODE BEGIN EXTI15_10_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END EXTI15_10_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This function handles HSEM global interrupt.
|
||||||
|
*/
|
||||||
|
void HSEM_IRQHandler(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HSEM_IRQn 0 */
|
||||||
|
|
||||||
|
/* USER CODE END HSEM_IRQn 0 */
|
||||||
|
HAL_HSEM_IRQHandler();
|
||||||
|
/* USER CODE BEGIN HSEM_IRQn 1 */
|
||||||
|
|
||||||
|
/* USER CODE END HSEM_IRQn 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
357
firmware/targets/f3/Src/system_stm32wbxx.c
Normal file
357
firmware/targets/f3/Src/system_stm32wbxx.c
Normal file
@ -0,0 +1,357 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file system_stm32wbxx.c
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @brief CMSIS Cortex Device Peripheral Access Layer System Source File
|
||||||
|
*
|
||||||
|
* This file provides two functions and one global variable to be called from
|
||||||
|
* user application:
|
||||||
|
* - SystemInit(): This function is called at startup just after reset and
|
||||||
|
* before branch to main program. This call is made inside
|
||||||
|
* the "startup_stm32wbxx.s" file.
|
||||||
|
*
|
||||||
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||||
|
* by the user application to setup the SysTick
|
||||||
|
* timer or configure other parameters.
|
||||||
|
*
|
||||||
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||||
|
* be called whenever the core clock is changed
|
||||||
|
* during program execution.
|
||||||
|
*
|
||||||
|
* After each device reset the MSI (4 MHz) is used as system clock source.
|
||||||
|
* Then SystemInit() function is called, in "startup_stm32wbxx.s" file, to
|
||||||
|
* configure the system clock before to branch to main program.
|
||||||
|
*
|
||||||
|
* This file configures the system clock as follows:
|
||||||
|
*=============================================================================
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* System Clock source | MSI
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* SYSCLK(Hz) | 4000000
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* HCLK(Hz) | 4000000
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* AHB Prescaler | 1
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* APB1 Prescaler | 1
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* APB2 Prescaler | 1
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLL_M | 1
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLL_N | 8
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLL_P | 7
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLL_Q | 2
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLL_R | 2
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLLSAI1_P | NA
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLLSAI1_Q | NA
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* PLLSAI1_R | NA
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
* Require 48MHz for USB OTG FS, | Disabled
|
||||||
|
* SDIO and RNG clock |
|
||||||
|
*-----------------------------------------------------------------------------
|
||||||
|
*=============================================================================
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup CMSIS
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup stm32WBxx_system
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup stm32WBxx_System_Private_Includes
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "stm32wbxx.h"
|
||||||
|
|
||||||
|
#if !defined (HSE_VALUE)
|
||||||
|
#define HSE_VALUE (32000000UL) /*!< Value of the External oscillator in Hz */
|
||||||
|
#endif /* HSE_VALUE */
|
||||||
|
|
||||||
|
#if !defined (MSI_VALUE)
|
||||||
|
#define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* MSI_VALUE */
|
||||||
|
|
||||||
|
#if !defined (HSI_VALUE)
|
||||||
|
#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
|
||||||
|
#endif /* HSI_VALUE */
|
||||||
|
|
||||||
|
#if !defined (LSI_VALUE)
|
||||||
|
#define LSI_VALUE (32000UL) /*!< Value of LSI in Hz*/
|
||||||
|
#endif /* LSI_VALUE */
|
||||||
|
|
||||||
|
#if !defined (LSE_VALUE)
|
||||||
|
#define LSE_VALUE (32768UL) /*!< Value of LSE in Hz*/
|
||||||
|
#endif /* LSE_VALUE */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32WBxx_System_Private_TypesDefinitions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32WBxx_System_Private_Defines
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||||
|
Internal SRAM. */
|
||||||
|
/* #define VECT_TAB_SRAM */
|
||||||
|
#define VECT_TAB_OFFSET OS_OFFSET /*!< Vector Table base offset field.
|
||||||
|
This value must be a multiple of 0x200. */
|
||||||
|
|
||||||
|
#define VECT_TAB_BASE_ADDRESS SRAM1_BASE /*!< Vector Table base offset field.
|
||||||
|
This value must be a multiple of 0x200. */
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32WBxx_System_Private_Macros
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32WBxx_System_Private_Variables
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/* The SystemCoreClock variable is updated in three ways:
|
||||||
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||||
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||||
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||||
|
Note: If you use this function to configure the system clock; then there
|
||||||
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||||
|
variable is updated automatically.
|
||||||
|
*/
|
||||||
|
uint32_t SystemCoreClock = 4000000UL ; /*CPU1: M4 on MSI clock after startup (4MHz)*/
|
||||||
|
|
||||||
|
const uint32_t AHBPrescTable[16UL] = {1UL, 3UL, 5UL, 1UL, 1UL, 6UL, 10UL, 32UL, 2UL, 4UL, 8UL, 16UL, 64UL, 128UL, 256UL, 512UL};
|
||||||
|
|
||||||
|
const uint32_t APBPrescTable[8UL] = {0UL, 0UL, 0UL, 0UL, 1UL, 2UL, 3UL, 4UL};
|
||||||
|
|
||||||
|
const uint32_t MSIRangeTable[16UL] = {100000UL, 200000UL, 400000UL, 800000UL, 1000000UL, 2000000UL, \
|
||||||
|
4000000UL, 8000000UL, 16000000UL, 24000000UL, 32000000UL, 48000000UL, 0UL, 0UL, 0UL, 0UL}; /* 0UL values are incorrect cases */
|
||||||
|
|
||||||
|
#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx)
|
||||||
|
const uint32_t SmpsPrescalerTable[4UL][6UL]={{1UL,3UL,2UL,2UL,1UL,2UL}, \
|
||||||
|
{2UL,6UL,4UL,3UL,2UL,4UL}, \
|
||||||
|
{4UL,12UL,8UL,6UL,4UL,8UL}, \
|
||||||
|
{4UL,12UL,8UL,6UL,4UL,8UL}};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32WBxx_System_Private_FunctionPrototypes
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup STM32WBxx_System_Private_Functions
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Setup the microcontroller system.
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemInit(void)
|
||||||
|
{
|
||||||
|
/* Configure the Vector Table location add offset address ------------------*/
|
||||||
|
#if defined(VECT_TAB_SRAM) && defined(VECT_TAB_BASE_ADDRESS)
|
||||||
|
/* program in SRAMx */
|
||||||
|
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAMx for CPU1 */
|
||||||
|
#else /* program in FLASH */
|
||||||
|
SCB->VTOR = VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* FPU settings ------------------------------------------------------------*/
|
||||||
|
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||||
|
SCB->CPACR |= ((3UL << (10UL*2UL))|(3UL << (11UL*2UL))); /* set CP10 and CP11 Full Access */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||||
|
/* Set MSION bit */
|
||||||
|
RCC->CR |= RCC_CR_MSION;
|
||||||
|
|
||||||
|
/* Reset CFGR register */
|
||||||
|
RCC->CFGR = 0x00070000U;
|
||||||
|
|
||||||
|
/* Reset PLLSAI1ON, PLLON, HSECSSON, HSEON, HSION, and MSIPLLON bits */
|
||||||
|
RCC->CR &= (uint32_t)0xFAF6FEFBU;
|
||||||
|
|
||||||
|
/*!< Reset LSI1 and LSI2 bits */
|
||||||
|
RCC->CSR &= (uint32_t)0xFFFFFFFAU;
|
||||||
|
|
||||||
|
/*!< Reset HSI48ON bit */
|
||||||
|
RCC->CRRCR &= (uint32_t)0xFFFFFFFEU;
|
||||||
|
|
||||||
|
/* Reset PLLCFGR register */
|
||||||
|
RCC->PLLCFGR = 0x22041000U;
|
||||||
|
|
||||||
|
#if defined(STM32WB55xx) || defined(STM32WB5Mxx)
|
||||||
|
/* Reset PLLSAI1CFGR register */
|
||||||
|
RCC->PLLSAI1CFGR = 0x22041000U;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Reset HSEBYP bit */
|
||||||
|
RCC->CR &= 0xFFFBFFFFU;
|
||||||
|
|
||||||
|
/* Disable all interrupts */
|
||||||
|
RCC->CIER = 0x00000000;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||||
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||||
|
* be used by the user application to setup the SysTick timer or configure
|
||||||
|
* other parameters.
|
||||||
|
*
|
||||||
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||||
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||||
|
* based on this variable will be incorrect.
|
||||||
|
*
|
||||||
|
* @note - The system frequency computed by this function is not the real
|
||||||
|
* frequency in the chip. It is calculated based on the predefined
|
||||||
|
* constant and the selected clock source:
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
||||||
|
*
|
||||||
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
|
||||||
|
* or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||||
|
*
|
||||||
|
* (*) MSI_VALUE is a constant defined in stm32wbxx_hal.h file (default value
|
||||||
|
* 4 MHz) but the real value may vary depending on the variations
|
||||||
|
* in voltage and temperature.
|
||||||
|
*
|
||||||
|
* (**) HSI_VALUE is a constant defined in stm32wbxx_hal_conf.h file (default value
|
||||||
|
* 16 MHz) but the real value may vary depending on the variations
|
||||||
|
* in voltage and temperature.
|
||||||
|
*
|
||||||
|
* (***) HSE_VALUE is a constant defined in stm32wbxx_hal_conf.h file (default value
|
||||||
|
* 32 MHz), user has to ensure that HSE_VALUE is same as the real
|
||||||
|
* frequency of the crystal used. Otherwise, this function may
|
||||||
|
* have wrong result.
|
||||||
|
*
|
||||||
|
* - The result of this function could be not correct when using fractional
|
||||||
|
* value for HSE crystal.
|
||||||
|
*
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void SystemCoreClockUpdate(void)
|
||||||
|
{
|
||||||
|
uint32_t tmp, msirange, pllvco, pllr, pllsource , pllm;
|
||||||
|
|
||||||
|
/* Get MSI Range frequency--------------------------------------------------*/
|
||||||
|
|
||||||
|
/*MSI frequency range in Hz*/
|
||||||
|
msirange = MSIRangeTable[(RCC->CR & RCC_CR_MSIRANGE) >> RCC_CR_MSIRANGE_Pos];
|
||||||
|
|
||||||
|
/* Get SYSCLK source -------------------------------------------------------*/
|
||||||
|
switch (RCC->CFGR & RCC_CFGR_SWS)
|
||||||
|
{
|
||||||
|
case 0x00: /* MSI used as system clock source */
|
||||||
|
SystemCoreClock = msirange;
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 0x04: /* HSI used as system clock source */
|
||||||
|
/* HSI used as system clock source */
|
||||||
|
SystemCoreClock = HSI_VALUE;
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 0x08: /* HSE used as system clock source */
|
||||||
|
SystemCoreClock = HSE_VALUE;
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 0x0C: /* PLL used as system clock source */
|
||||||
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
|
||||||
|
SYSCLK = PLL_VCO / PLLR
|
||||||
|
*/
|
||||||
|
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
|
||||||
|
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1UL ;
|
||||||
|
|
||||||
|
if(pllsource == 0x02UL) /* HSI used as PLL clock source */
|
||||||
|
{
|
||||||
|
pllvco = (HSI_VALUE / pllm);
|
||||||
|
}
|
||||||
|
else if(pllsource == 0x03UL) /* HSE used as PLL clock source */
|
||||||
|
{
|
||||||
|
pllvco = (HSE_VALUE / pllm);
|
||||||
|
}
|
||||||
|
else /* MSI used as PLL clock source */
|
||||||
|
{
|
||||||
|
pllvco = (msirange / pllm);
|
||||||
|
}
|
||||||
|
|
||||||
|
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
|
||||||
|
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
|
||||||
|
|
||||||
|
SystemCoreClock = pllvco/pllr;
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
SystemCoreClock = msirange;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Compute HCLK clock frequency --------------------------------------------*/
|
||||||
|
/* Get HCLK1 prescaler */
|
||||||
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
|
||||||
|
/* HCLK clock frequency */
|
||||||
|
SystemCoreClock = SystemCoreClock / tmp;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
361
firmware/targets/f3/Src/tim.c
Normal file
361
firmware/targets/f3/Src/tim.c
Normal file
@ -0,0 +1,361 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : TIM.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the TIM instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "tim.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
TIM_HandleTypeDef htim1;
|
||||||
|
TIM_HandleTypeDef htim2;
|
||||||
|
TIM_HandleTypeDef htim16;
|
||||||
|
|
||||||
|
/* TIM1 init function */
|
||||||
|
void MX_TIM1_Init(void)
|
||||||
|
{
|
||||||
|
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||||
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||||
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||||
|
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
|
||||||
|
|
||||||
|
htim1.Instance = TIM1;
|
||||||
|
htim1.Init.Prescaler = 0;
|
||||||
|
htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim1.Init.Period = 65535;
|
||||||
|
htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim1.Init.RepetitionCounter = 0;
|
||||||
|
htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||||
|
if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_TIM_OC_Init(&htim1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||||
|
sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
|
||||||
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||||
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_TIMING;
|
||||||
|
sConfigOC.Pulse = 0;
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||||
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||||
|
if (HAL_TIM_OC_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
||||||
|
sBreakDeadTimeConfig.DeadTime = 0;
|
||||||
|
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
||||||
|
sBreakDeadTimeConfig.BreakFilter = 0;
|
||||||
|
sBreakDeadTimeConfig.BreakAFMode = TIM_BREAK_AFMODE_INPUT;
|
||||||
|
sBreakDeadTimeConfig.Break2State = TIM_BREAK2_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.Break2Polarity = TIM_BREAK2POLARITY_HIGH;
|
||||||
|
sBreakDeadTimeConfig.Break2Filter = 0;
|
||||||
|
sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT;
|
||||||
|
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
||||||
|
if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
HAL_TIM_MspPostInit(&htim1);
|
||||||
|
|
||||||
|
}
|
||||||
|
/* TIM2 init function */
|
||||||
|
void MX_TIM2_Init(void)
|
||||||
|
{
|
||||||
|
TIM_ClockConfigTypeDef sClockSourceConfig = {0};
|
||||||
|
TIM_MasterConfigTypeDef sMasterConfig = {0};
|
||||||
|
TIM_IC_InitTypeDef sConfigIC = {0};
|
||||||
|
|
||||||
|
htim2.Instance = TIM2;
|
||||||
|
htim2.Init.Prescaler = 64-1;
|
||||||
|
htim2.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim2.Init.Period = 4294967295;
|
||||||
|
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||||
|
if (HAL_TIM_ConfigClockSource(&htim2, &sClockSourceConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_TIM_IC_Init(&htim2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||||
|
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||||
|
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigIC.ICPolarity = TIM_INPUTCHANNELPOLARITY_FALLING;
|
||||||
|
sConfigIC.ICSelection = TIM_ICSELECTION_DIRECTTI;
|
||||||
|
sConfigIC.ICPrescaler = TIM_ICPSC_DIV1;
|
||||||
|
sConfigIC.ICFilter = 0;
|
||||||
|
if (HAL_TIM_IC_ConfigChannel(&htim2, &sConfigIC, TIM_CHANNEL_1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigIC.ICPolarity = TIM_INPUTCHANNELPOLARITY_RISING;
|
||||||
|
sConfigIC.ICSelection = TIM_ICSELECTION_INDIRECTTI;
|
||||||
|
if (HAL_TIM_IC_ConfigChannel(&htim2, &sConfigIC, TIM_CHANNEL_2) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
/* TIM16 init function */
|
||||||
|
void MX_TIM16_Init(void)
|
||||||
|
{
|
||||||
|
TIM_OC_InitTypeDef sConfigOC = {0};
|
||||||
|
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
|
||||||
|
|
||||||
|
htim16.Instance = TIM16;
|
||||||
|
htim16.Init.Prescaler = 500 - 1;
|
||||||
|
htim16.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
htim16.Init.Period = 291;
|
||||||
|
htim16.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
htim16.Init.RepetitionCounter = 0;
|
||||||
|
htim16.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
if (HAL_TIM_Base_Init(&htim16) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_TIM_PWM_Init(&htim16) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
sConfigOC.Pulse = 145;
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||||
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||||
|
if (HAL_TIM_PWM_ConfigChannel(&htim16, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
||||||
|
sBreakDeadTimeConfig.DeadTime = 0;
|
||||||
|
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
||||||
|
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
||||||
|
sBreakDeadTimeConfig.BreakFilter = 0;
|
||||||
|
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
||||||
|
if (HAL_TIMEx_ConfigBreakDeadTime(&htim16, &sBreakDeadTimeConfig) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
HAL_TIM_MspPostInit(&htim16);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(tim_baseHandle->Instance==TIM1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_MspInit 0 */
|
||||||
|
/* TIM1 clock enable */
|
||||||
|
__HAL_RCC_TIM1_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* TIM1 interrupt Init */
|
||||||
|
HAL_NVIC_SetPriority(TIM1_TRG_COM_TIM17_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(TIM1_TRG_COM_TIM17_IRQn);
|
||||||
|
/* USER CODE BEGIN TIM1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(tim_baseHandle->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspInit 0 */
|
||||||
|
/* TIM2 clock enable */
|
||||||
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**TIM2 GPIO Configuration
|
||||||
|
PA0 ------> TIM2_CH1
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = IR_RX_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
|
||||||
|
HAL_GPIO_Init(IR_RX_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* TIM2 interrupt Init */
|
||||||
|
HAL_NVIC_SetPriority(TIM2_IRQn, 0, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(TIM2_IRQn);
|
||||||
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspInit 1 */
|
||||||
|
}
|
||||||
|
else if(tim_baseHandle->Instance==TIM16)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM16_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM16_MspInit 0 */
|
||||||
|
/* TIM16 clock enable */
|
||||||
|
__HAL_RCC_TIM16_CLK_ENABLE();
|
||||||
|
/* USER CODE BEGIN TIM16_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM16_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(timHandle->Instance==TIM1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM1_MspPostInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_MspPostInit 0 */
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**TIM1 GPIO Configuration
|
||||||
|
PB9 ------> TIM1_CH3N
|
||||||
|
PB13 ------> TIM1_CH1N
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = IR_TX_Pin|RFID_OUT_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM1_MspPostInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_MspPostInit 1 */
|
||||||
|
}
|
||||||
|
else if(timHandle->Instance==TIM16)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM16_MspPostInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM16_MspPostInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**TIM16 GPIO Configuration
|
||||||
|
PB8 ------> TIM16_CH1
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = SPEAKER_Pin;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF14_TIM16;
|
||||||
|
HAL_GPIO_Init(SPEAKER_GPIO_Port, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN TIM16_MspPostInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM16_MspPostInit 1 */
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(tim_baseHandle->Instance==TIM1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/* TIM1 interrupt Deinit */
|
||||||
|
HAL_NVIC_DisableIRQ(TIM1_TRG_COM_TIM17_IRQn);
|
||||||
|
/* USER CODE BEGIN TIM1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(tim_baseHandle->Instance==TIM2)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**TIM2 GPIO Configuration
|
||||||
|
PA0 ------> TIM2_CH1
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(IR_RX_GPIO_Port, IR_RX_Pin);
|
||||||
|
|
||||||
|
/* TIM2 interrupt Deinit */
|
||||||
|
HAL_NVIC_DisableIRQ(TIM2_IRQn);
|
||||||
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM2_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
else if(tim_baseHandle->Instance==TIM16)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN TIM16_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM16_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_TIM16_CLK_DISABLE();
|
||||||
|
/* USER CODE BEGIN TIM16_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END TIM16_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
121
firmware/targets/f3/Src/usart.c
Normal file
121
firmware/targets/f3/Src/usart.c
Normal file
@ -0,0 +1,121 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* File Name : USART.c
|
||||||
|
* Description : This file provides code for the configuration
|
||||||
|
* of the USART instances.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usart.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
UART_HandleTypeDef huart1;
|
||||||
|
|
||||||
|
/* USART1 init function */
|
||||||
|
|
||||||
|
void MX_USART1_UART_Init(void)
|
||||||
|
{
|
||||||
|
|
||||||
|
huart1.Instance = USART1;
|
||||||
|
huart1.Init.BaudRate = 115200;
|
||||||
|
huart1.Init.WordLength = UART_WORDLENGTH_8B;
|
||||||
|
huart1.Init.StopBits = UART_STOPBITS_1;
|
||||||
|
huart1.Init.Parity = UART_PARITY_NONE;
|
||||||
|
huart1.Init.Mode = UART_MODE_TX_RX;
|
||||||
|
huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||||
|
huart1.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||||
|
huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
|
||||||
|
huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;
|
||||||
|
huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
|
||||||
|
if (HAL_UART_Init(&huart1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(uartHandle->Instance==USART1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspInit 0 */
|
||||||
|
/* USART1 clock enable */
|
||||||
|
__HAL_RCC_USART1_CLK_ENABLE();
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||||
|
/**USART1 GPIO Configuration
|
||||||
|
PB6 ------> USART1_TX
|
||||||
|
PB7 ------> USART1_RX
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
||||||
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||||
|
{
|
||||||
|
|
||||||
|
if(uartHandle->Instance==USART1)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_USART1_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**USART1 GPIO Configuration
|
||||||
|
PB6 ------> USART1_TX
|
||||||
|
PB7 ------> USART1_RX
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_7);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USART1_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
99
firmware/targets/f3/Src/usb_device.c
Normal file
99
firmware/targets/f3/Src/usb_device.c
Normal file
@ -0,0 +1,99 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usb_device.c
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : This file implements the USB Device
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#include "usb_device.h"
|
||||||
|
#include "usbd_core.h"
|
||||||
|
#include "usbd_desc.h"
|
||||||
|
#include "usbd_cdc.h"
|
||||||
|
#include "usbd_cdc_if.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
extern void Error_Handler(void);
|
||||||
|
/* USB Device Core handle declaration. */
|
||||||
|
USBD_HandleTypeDef hUsbDeviceFS;
|
||||||
|
extern USBD_DescriptorsTypeDef CDC_Desc;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert your variables declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* -- Insert your external function declaration here --
|
||||||
|
*/
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Init USB device Library, add supported class and start the library
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void MX_USB_Device_Init(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_Device_Init_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END USB_Device_Init_PreTreatment */
|
||||||
|
|
||||||
|
/* Init Device Library, add supported class and start the library. */
|
||||||
|
if (USBD_Init(&hUsbDeviceFS, &CDC_Desc, DEVICE_FS) != USBD_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC) != USBD_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS) != USBD_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
if (USBD_Start(&hUsbDeviceFS) != USBD_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* USER CODE BEGIN USB_Device_Init_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END USB_Device_Init_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
331
firmware/targets/f3/Src/usbd_cdc_if.c
Normal file
331
firmware/targets/f3/Src/usbd_cdc_if.c
Normal file
@ -0,0 +1,331 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_cdc_if.c
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : Usb device for Virtual Com Port.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_cdc_if.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @brief Usb device library.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup USBD_CDC_IF
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_TypesDefinitions USBD_CDC_IF_Private_TypesDefinitions
|
||||||
|
* @brief Private types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_Defines USBD_CDC_IF_Private_Defines
|
||||||
|
* @brief Private defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||||
|
/* USER CODE END PRIVATE_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_Macros USBD_CDC_IF_Private_Macros
|
||||||
|
* @brief Private macros.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_Variables USBD_CDC_IF_Private_Variables
|
||||||
|
* @brief Private variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
/* Create buffer for reception and transmission */
|
||||||
|
/* It's up to user to redefine and/or remove those define */
|
||||||
|
/** Received data over USB are stored in this buffer */
|
||||||
|
uint8_t UserRxBufferFS[APP_RX_DATA_SIZE];
|
||||||
|
|
||||||
|
/** Data to send over USB CDC are stored in this buffer */
|
||||||
|
uint8_t UserTxBufferFS[APP_TX_DATA_SIZE];
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
|
||||||
|
* @brief Public variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
extern USBD_HandleTypeDef hUsbDeviceFS;
|
||||||
|
|
||||||
|
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/* USER CODE END EXPORTED_VARIABLES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_CDC_IF_Private_FunctionPrototypes USBD_CDC_IF_Private_FunctionPrototypes
|
||||||
|
* @brief Private functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int8_t CDC_Init_FS(void);
|
||||||
|
static int8_t CDC_DeInit_FS(void);
|
||||||
|
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length);
|
||||||
|
static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len);
|
||||||
|
static int8_t CDC_TransmitCplt_FS(uint8_t *pbuf, uint32_t *Len, uint8_t epnum);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
|
||||||
|
{
|
||||||
|
CDC_Init_FS,
|
||||||
|
CDC_DeInit_FS,
|
||||||
|
CDC_Control_FS,
|
||||||
|
CDC_Receive_FS,
|
||||||
|
CDC_TransmitCplt_FS
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Private functions ---------------------------------------------------------*/
|
||||||
|
/**
|
||||||
|
* @brief Initializes the CDC media low layer over the FS USB IP
|
||||||
|
* @retval USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_Init_FS(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 3 */
|
||||||
|
/* Set Application Buffers */
|
||||||
|
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0);
|
||||||
|
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS);
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 3 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief DeInitializes the CDC media low layer
|
||||||
|
* @retval USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_DeInit_FS(void)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 4 */
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 4 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Manage the CDC class requests
|
||||||
|
* @param cmd: Command code
|
||||||
|
* @param pbuf: Buffer containing command data (request parameters)
|
||||||
|
* @param length: Number of data to be sent (in bytes)
|
||||||
|
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 5 */
|
||||||
|
switch(cmd)
|
||||||
|
{
|
||||||
|
case CDC_SEND_ENCAPSULATED_COMMAND:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_GET_ENCAPSULATED_RESPONSE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_SET_COMM_FEATURE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_GET_COMM_FEATURE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_CLEAR_COMM_FEATURE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
/*******************************************************************************/
|
||||||
|
/* Line Coding Structure */
|
||||||
|
/*-----------------------------------------------------------------------------*/
|
||||||
|
/* Offset | Field | Size | Value | Description */
|
||||||
|
/* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
|
||||||
|
/* 4 | bCharFormat | 1 | Number | Stop bits */
|
||||||
|
/* 0 - 1 Stop bit */
|
||||||
|
/* 1 - 1.5 Stop bits */
|
||||||
|
/* 2 - 2 Stop bits */
|
||||||
|
/* 5 | bParityType | 1 | Number | Parity */
|
||||||
|
/* 0 - None */
|
||||||
|
/* 1 - Odd */
|
||||||
|
/* 2 - Even */
|
||||||
|
/* 3 - Mark */
|
||||||
|
/* 4 - Space */
|
||||||
|
/* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
|
||||||
|
/*******************************************************************************/
|
||||||
|
case CDC_SET_LINE_CODING:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_GET_LINE_CODING:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_SET_CONTROL_LINE_STATE:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
case CDC_SEND_BREAK:
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 5 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Data received over USB OUT endpoint are sent over CDC interface
|
||||||
|
* through this function.
|
||||||
|
*
|
||||||
|
* @note
|
||||||
|
* This function will issue a NAK packet on any OUT packet received on
|
||||||
|
* USB endpoint until exiting this function. If you exit this function
|
||||||
|
* before transfer is complete on CDC interface (ie. using DMA controller)
|
||||||
|
* it will result in receiving more data while previous ones are still
|
||||||
|
* not sent.
|
||||||
|
*
|
||||||
|
* @param Buf: Buffer of data to be received
|
||||||
|
* @param Len: Number of data received (in bytes)
|
||||||
|
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN 6 */
|
||||||
|
USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]);
|
||||||
|
USBD_CDC_ReceivePacket(&hUsbDeviceFS);
|
||||||
|
return (USBD_OK);
|
||||||
|
/* USER CODE END 6 */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief CDC_Transmit_FS
|
||||||
|
* Data to send over USB IN endpoint are sent over CDC interface
|
||||||
|
* through this function.
|
||||||
|
* @note
|
||||||
|
*
|
||||||
|
*
|
||||||
|
* @param Buf: Buffer of data to be sent
|
||||||
|
* @param Len: Number of data to be sent (in bytes)
|
||||||
|
* @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
|
||||||
|
*/
|
||||||
|
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len)
|
||||||
|
{
|
||||||
|
uint8_t result = USBD_OK;
|
||||||
|
/* USER CODE BEGIN 7 */
|
||||||
|
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData;
|
||||||
|
if (hcdc->TxState != 0){
|
||||||
|
return USBD_BUSY;
|
||||||
|
}
|
||||||
|
USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len);
|
||||||
|
result = USBD_CDC_TransmitPacket(&hUsbDeviceFS);
|
||||||
|
/* USER CODE END 7 */
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief CDC_TransmitCplt_FS
|
||||||
|
* Data transmited callback
|
||||||
|
*
|
||||||
|
* @note
|
||||||
|
* This function is IN transfer complete callback used to inform user that
|
||||||
|
* the submitted Data is successfully sent over USB.
|
||||||
|
*
|
||||||
|
* @param Buf: Buffer of data to be received
|
||||||
|
* @param Len: Number of data received (in bytes)
|
||||||
|
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||||
|
*/
|
||||||
|
static int8_t CDC_TransmitCplt_FS(uint8_t *Buf, uint32_t *Len, uint8_t epnum)
|
||||||
|
{
|
||||||
|
uint8_t result = USBD_OK;
|
||||||
|
/* USER CODE BEGIN 13 */
|
||||||
|
UNUSED(Buf);
|
||||||
|
UNUSED(Len);
|
||||||
|
UNUSED(epnum);
|
||||||
|
/* USER CODE END 13 */
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
810
firmware/targets/f3/Src/usbd_conf.c
Normal file
810
firmware/targets/f3/Src/usbd_conf.c
Normal file
@ -0,0 +1,810 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_conf.c
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : This file implements the board support package for the USB device library
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "stm32wbxx.h"
|
||||||
|
#include "stm32wbxx_hal.h"
|
||||||
|
#include "usbd_def.h"
|
||||||
|
#include "usbd_core.h"
|
||||||
|
|
||||||
|
#include "usbd_cdc.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN Includes */
|
||||||
|
|
||||||
|
/* USER CODE END Includes */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
PCD_HandleTypeDef hpcd_USB_FS;
|
||||||
|
void Error_Handler(void);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/* Exported function prototypes ----------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PFP */
|
||||||
|
/* Private function prototypes -----------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PFP */
|
||||||
|
|
||||||
|
/* Private functions ---------------------------------------------------------*/
|
||||||
|
static USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status);
|
||||||
|
/* USER CODE BEGIN 1 */
|
||||||
|
static void SystemClockConfig_Resume(void);
|
||||||
|
|
||||||
|
/* USER CODE END 1 */
|
||||||
|
extern void SystemClock_Config(void);
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
LL Driver Callbacks (PCD -> USB Device Library)
|
||||||
|
*******************************************************************************/
|
||||||
|
/* MSP Init */
|
||||||
|
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACK == 1U)
|
||||||
|
static void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACK */
|
||||||
|
{
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
if(pcdHandle->Instance==USB)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_MspInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspInit 0 */
|
||||||
|
|
||||||
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||||
|
/**USB GPIO Configuration
|
||||||
|
PA11 ------> USB_DM
|
||||||
|
PA12 ------> USB_DP
|
||||||
|
*/
|
||||||
|
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
|
||||||
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||||
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||||
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||||
|
GPIO_InitStruct.Alternate = GPIO_AF10_USB;
|
||||||
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||||
|
|
||||||
|
/* Peripheral clock enable */
|
||||||
|
__HAL_RCC_USB_CLK_ENABLE();
|
||||||
|
|
||||||
|
/* Peripheral interrupt init */
|
||||||
|
HAL_NVIC_SetPriority(USB_LP_IRQn, 5, 0);
|
||||||
|
HAL_NVIC_EnableIRQ(USB_LP_IRQn);
|
||||||
|
/* USER CODE BEGIN USB_MspInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACK == 1U)
|
||||||
|
static void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACK */
|
||||||
|
{
|
||||||
|
if(pcdHandle->Instance==USB)
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN USB_MspDeInit 0 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspDeInit 0 */
|
||||||
|
/* Peripheral clock disable */
|
||||||
|
__HAL_RCC_USB_CLK_DISABLE();
|
||||||
|
|
||||||
|
/**USB GPIO Configuration
|
||||||
|
PA11 ------> USB_DM
|
||||||
|
PA12 ------> USB_DP
|
||||||
|
*/
|
||||||
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
||||||
|
|
||||||
|
/* Peripheral interrupt Deinit*/
|
||||||
|
HAL_NVIC_DisableIRQ(USB_LP_IRQn);
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USB_MspDeInit 1 */
|
||||||
|
|
||||||
|
/* USER CODE END USB_MspDeInit 1 */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Setup stage callback
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_SetupStageCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_SetupStageCallback_PreTreatment */
|
||||||
|
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_SetupStageCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_SetupStageCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Data Out stage callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_DataOutStageCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_DataOutStageCallback_PreTreatment */
|
||||||
|
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_DataOutStageCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_DataOutStageCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Data In stage callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_DataInStageCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_DataInStageCallback_PreTreatment */
|
||||||
|
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_DataInStageCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_DataInStageCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief SOF callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_SOFCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_SOFCallback_PreTreatment */
|
||||||
|
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_SOFCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_SOFCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Reset callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ResetCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ResetCallback_PreTreatment */
|
||||||
|
USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
|
||||||
|
|
||||||
|
if ( hpcd->Init.speed != PCD_SPEED_FULL)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/* Set Speed. */
|
||||||
|
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
|
||||||
|
|
||||||
|
/* Reset Device. */
|
||||||
|
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ResetCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ResetCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Suspend callback.
|
||||||
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_SuspendCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_SuspendCallback_PreTreatment */
|
||||||
|
/* Inform USB library that core enters in suspend Mode. */
|
||||||
|
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* Enter in STOP mode. */
|
||||||
|
/* USER CODE BEGIN 2 */
|
||||||
|
if (hpcd->Init.low_power_enable)
|
||||||
|
{
|
||||||
|
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
|
||||||
|
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||||
|
}
|
||||||
|
/* USER CODE END 2 */
|
||||||
|
/* USER CODE BEGIN HAL_PCD_SuspendCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_SuspendCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Resume callback.
|
||||||
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ResumeCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ResumeCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 3 */
|
||||||
|
if (hpcd->Init.low_power_enable)
|
||||||
|
{
|
||||||
|
/* Reset SLEEPDEEP bit of Cortex System Control Register. */
|
||||||
|
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||||
|
SystemClockConfig_Resume();
|
||||||
|
}
|
||||||
|
/* USER CODE END 3 */
|
||||||
|
|
||||||
|
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ResumeCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ResumeCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ISOOUTIncomplete callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ISOOUTIncompleteCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ISOOUTIncompleteCallback_PreTreatment */
|
||||||
|
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ISOOUTIncompleteCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ISOOUTIncompleteCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ISOINIncomplete callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param epnum: Endpoint number
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ISOINIncompleteCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ISOINIncompleteCallback_PreTreatment */
|
||||||
|
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ISOINIncompleteCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ISOINIncompleteCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Connect callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ConnectCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ConnectCallback_PreTreatment */
|
||||||
|
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_ConnectCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_ConnectCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Disconnect callback.
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#else
|
||||||
|
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN HAL_PCD_DisconnectCallback_PreTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_DisconnectCallback_PreTreatment */
|
||||||
|
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||||
|
/* USER CODE BEGIN HAL_PCD_DisconnectCallback_PostTreatment */
|
||||||
|
|
||||||
|
/* USER CODE END HAL_PCD_DisconnectCallback_PostTreatment */
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN LowLevelInterface */
|
||||||
|
|
||||||
|
/* USER CODE END LowLevelInterface */
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
LL Driver Interface (USB Device Library --> PCD)
|
||||||
|
*******************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Initializes the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
/* Init USB Ip. */
|
||||||
|
hpcd_USB_FS.pData = pdev;
|
||||||
|
/* Link the driver to the stack. */
|
||||||
|
pdev->pData = &hpcd_USB_FS;
|
||||||
|
/* Enable USB power on Pwrctrl CR2 register. */
|
||||||
|
HAL_PWREx_EnableVddUSB();
|
||||||
|
|
||||||
|
hpcd_USB_FS.Instance = USB;
|
||||||
|
hpcd_USB_FS.Init.dev_endpoints = 8;
|
||||||
|
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
|
||||||
|
hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
|
||||||
|
hpcd_USB_FS.Init.Sof_enable = DISABLE;
|
||||||
|
hpcd_USB_FS.Init.low_power_enable = DISABLE;
|
||||||
|
hpcd_USB_FS.Init.lpm_enable = DISABLE;
|
||||||
|
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
|
||||||
|
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
/* register Msp Callbacks (before the Init) */
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_MSPINIT_CB_ID, PCD_MspInit);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_MSPDEINIT_CB_ID, PCD_MspDeInit);
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
|
||||||
|
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler( );
|
||||||
|
}
|
||||||
|
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
/* Register USB PCD CallBacks */
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SOF_CB_ID, PCD_SOFCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SETUPSTAGE_CB_ID, PCD_SetupStageCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESET_CB_ID, PCD_ResetCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_SUSPEND_CB_ID, PCD_SuspendCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_RESUME_CB_ID, PCD_ResumeCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_CONNECT_CB_ID, PCD_ConnectCallback);
|
||||||
|
HAL_PCD_RegisterCallback(&hpcd_USB_FS, HAL_PCD_DISCONNECT_CB_ID, PCD_DisconnectCallback);
|
||||||
|
/* USER CODE BEGIN RegisterCallBackFirstPart */
|
||||||
|
|
||||||
|
/* USER CODE END RegisterCallBackFirstPart */
|
||||||
|
HAL_PCD_RegisterLpmCallback(&hpcd_USB_FS, PCDEx_LPM_Callback);
|
||||||
|
HAL_PCD_RegisterDataOutStageCallback(&hpcd_USB_FS, PCD_DataOutStageCallback);
|
||||||
|
HAL_PCD_RegisterDataInStageCallback(&hpcd_USB_FS, PCD_DataInStageCallback);
|
||||||
|
HAL_PCD_RegisterIsoOutIncpltCallback(&hpcd_USB_FS, PCD_ISOOUTIncompleteCallback);
|
||||||
|
HAL_PCD_RegisterIsoInIncpltCallback(&hpcd_USB_FS, PCD_ISOINIncompleteCallback);
|
||||||
|
/* USER CODE BEGIN RegisterCallBackSecondPart */
|
||||||
|
|
||||||
|
/* USER CODE END RegisterCallBackSecondPart */
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
/* USER CODE BEGIN EndPoint_Configuration */
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
|
||||||
|
/* USER CODE END EndPoint_Configuration */
|
||||||
|
/* USER CODE BEGIN EndPoint_Configuration_CDC */
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
|
||||||
|
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
|
||||||
|
/* USER CODE END EndPoint_Configuration_CDC */
|
||||||
|
return USBD_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief De-Initializes the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_DeInit(pdev->pData);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Starts the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_Start(pdev->pData);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Stops the low level portion of the device driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_Stop(pdev->pData);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Opens an endpoint of the low level driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @param ep_type: Endpoint type
|
||||||
|
* @param ep_mps: Endpoint max packet size
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Closes an endpoint of the low level driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Flushes an endpoint of the Low Level Driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Sets a Stall condition on an endpoint of the Low Level Driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Clears a Stall condition on an endpoint of the Low Level Driver.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Returns Stall condition.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval Stall (1: Yes, 0: No)
|
||||||
|
*/
|
||||||
|
uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
|
||||||
|
|
||||||
|
if((ep_addr & 0x80) == 0x80)
|
||||||
|
{
|
||||||
|
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Assigns a USB address to the device.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param dev_addr: Device address
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Transmits data over an endpoint.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @param pbuf: Pointer to data to be sent
|
||||||
|
* @param size: Data size
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Prepares an endpoint for reception.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @param pbuf: Pointer to data to be received
|
||||||
|
* @param size: Data size
|
||||||
|
* @retval USBD status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
|
||||||
|
{
|
||||||
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
|
||||||
|
|
||||||
|
usb_status = USBD_Get_USB_Status(hal_status);
|
||||||
|
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Returns the last transfered packet size.
|
||||||
|
* @param pdev: Device handle
|
||||||
|
* @param ep_addr: Endpoint number
|
||||||
|
* @retval Recived Data Size
|
||||||
|
*/
|
||||||
|
uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||||
|
{
|
||||||
|
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Send LPM message to user layer
|
||||||
|
* @param hpcd: PCD handle
|
||||||
|
* @param msg: LPM message
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
|
||||||
|
static void PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
|
||||||
|
#else
|
||||||
|
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
|
||||||
|
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
|
||||||
|
{
|
||||||
|
/* USER CODE BEGIN LPM_Callback */
|
||||||
|
switch (msg)
|
||||||
|
{
|
||||||
|
case PCD_LPM_L0_ACTIVE:
|
||||||
|
if (hpcd->Init.low_power_enable)
|
||||||
|
{
|
||||||
|
SystemClockConfig_Resume();
|
||||||
|
|
||||||
|
/* Reset SLEEPDEEP bit of Cortex System Control Register. */
|
||||||
|
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||||
|
}
|
||||||
|
USBD_LL_Resume(hpcd->pData);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case PCD_LPM_L1_ACTIVE:
|
||||||
|
USBD_LL_Suspend(hpcd->pData);
|
||||||
|
|
||||||
|
/* Enter in STOP mode. */
|
||||||
|
if (hpcd->Init.low_power_enable)
|
||||||
|
{
|
||||||
|
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
|
||||||
|
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
/* USER CODE END LPM_Callback */
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Delays routine for the USB Device Library.
|
||||||
|
* @param Delay: Delay in ms
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void USBD_LL_Delay(uint32_t Delay)
|
||||||
|
{
|
||||||
|
HAL_Delay(Delay);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Static single allocation.
|
||||||
|
* @param size: Size of allocated memory
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void *USBD_static_malloc(uint32_t size)
|
||||||
|
{
|
||||||
|
static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
|
||||||
|
return mem;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Dummy memory free
|
||||||
|
* @param p: Pointer to allocated memory address
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
void USBD_static_free(void *p)
|
||||||
|
{
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 5 */
|
||||||
|
/**
|
||||||
|
* @brief Configures system clock after wake-up from USB resume callBack:
|
||||||
|
* enable HSI, PLL and select PLL as system clock source.
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void SystemClockConfig_Resume(void)
|
||||||
|
{
|
||||||
|
SystemClock_Config();
|
||||||
|
}
|
||||||
|
/* USER CODE END 5 */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Retuns the USB status depending on the HAL status:
|
||||||
|
* @param hal_status: HAL status
|
||||||
|
* @retval USB status
|
||||||
|
*/
|
||||||
|
USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status)
|
||||||
|
{
|
||||||
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||||
|
|
||||||
|
switch (hal_status)
|
||||||
|
{
|
||||||
|
case HAL_OK :
|
||||||
|
usb_status = USBD_OK;
|
||||||
|
break;
|
||||||
|
case HAL_ERROR :
|
||||||
|
usb_status = USBD_FAIL;
|
||||||
|
break;
|
||||||
|
case HAL_BUSY :
|
||||||
|
usb_status = USBD_BUSY;
|
||||||
|
break;
|
||||||
|
case HAL_TIMEOUT :
|
||||||
|
usb_status = USBD_FAIL;
|
||||||
|
break;
|
||||||
|
default :
|
||||||
|
usb_status = USBD_FAIL;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return usb_status;
|
||||||
|
}
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
396
firmware/targets/f3/Src/usbd_desc.c
Normal file
396
firmware/targets/f3/Src/usbd_desc.c
Normal file
@ -0,0 +1,396 @@
|
|||||||
|
/* USER CODE BEGIN Header */
|
||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file : usbd_desc.c
|
||||||
|
* @version : v3.0_Cube
|
||||||
|
* @brief : This file implements the USB device descriptors.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under Ultimate Liberty license
|
||||||
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||||
|
* the License. You may obtain a copy of the License at:
|
||||||
|
* www.st.com/SLA0044
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
/* USER CODE END Header */
|
||||||
|
|
||||||
|
/* Includes ------------------------------------------------------------------*/
|
||||||
|
#include "usbd_core.h"
|
||||||
|
#include "usbd_desc.h"
|
||||||
|
#include "usbd_conf.h"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN INCLUDE */
|
||||||
|
|
||||||
|
/* USER CODE END INCLUDE */
|
||||||
|
|
||||||
|
/* Private typedef -----------------------------------------------------------*/
|
||||||
|
/* Private define ------------------------------------------------------------*/
|
||||||
|
/* Private macro -------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PV */
|
||||||
|
/* Private variables ---------------------------------------------------------*/
|
||||||
|
|
||||||
|
/* USER CODE END PV */
|
||||||
|
|
||||||
|
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @addtogroup USBD_DESC
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
|
||||||
|
* @brief Private types.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_TYPES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
|
||||||
|
* @brief Private defines.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define USBD_VID 1155
|
||||||
|
#define USBD_LANGID_STRING 1033
|
||||||
|
#define USBD_MANUFACTURER_STRING "Flipper"
|
||||||
|
#define USBD_PID 22336
|
||||||
|
#define USBD_PRODUCT_STRING "Flipper Control Virtual ComPort"
|
||||||
|
#define USBD_CONFIGURATION_STRING "CDC Config"
|
||||||
|
#define USBD_INTERFACE_STRING "CDC Interface"
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_DEFINES */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN 0 */
|
||||||
|
|
||||||
|
/* USER CODE END 0 */
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
|
||||||
|
* @brief Private macros.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/* USER CODE END PRIVATE_MACRO */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
|
||||||
|
* @brief Private functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void Get_SerialNum(void);
|
||||||
|
static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
|
||||||
|
* @brief Private functions declaration.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
uint8_t * USBD_CDC_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_CDC_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_CDC_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_CDC_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_CDC_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_CDC_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
uint8_t * USBD_CDC_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
|
||||||
|
* @brief Private variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
USBD_DescriptorsTypeDef CDC_Desc =
|
||||||
|
{
|
||||||
|
USBD_CDC_DeviceDescriptor,
|
||||||
|
USBD_CDC_LangIDStrDescriptor,
|
||||||
|
USBD_CDC_ManufacturerStrDescriptor,
|
||||||
|
USBD_CDC_ProductStrDescriptor,
|
||||||
|
USBD_CDC_SerialStrDescriptor,
|
||||||
|
USBD_CDC_ConfigStrDescriptor,
|
||||||
|
USBD_CDC_InterfaceStrDescriptor
|
||||||
|
};
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif /* defined ( __ICCARM__ ) */
|
||||||
|
/** USB standard device descriptor. */
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_CDC_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
|
||||||
|
{
|
||||||
|
0x12, /*bLength */
|
||||||
|
USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
|
||||||
|
0x00, /*bcdUSB */
|
||||||
|
0x02,
|
||||||
|
0x02, /*bDeviceClass*/
|
||||||
|
0x02, /*bDeviceSubClass*/
|
||||||
|
0x00, /*bDeviceProtocol*/
|
||||||
|
USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
|
||||||
|
LOBYTE(USBD_VID), /*idVendor*/
|
||||||
|
HIBYTE(USBD_VID), /*idVendor*/
|
||||||
|
LOBYTE(USBD_PID), /*idProduct*/
|
||||||
|
HIBYTE(USBD_PID), /*idProduct*/
|
||||||
|
0x00, /*bcdDevice rel. 2.00*/
|
||||||
|
0x02,
|
||||||
|
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
|
||||||
|
USBD_IDX_PRODUCT_STR, /*Index of product string*/
|
||||||
|
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
|
||||||
|
USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
|
||||||
|
};
|
||||||
|
|
||||||
|
/* USB_DeviceDescriptor */
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
|
||||||
|
* @brief Private variables.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif /* defined ( __ICCARM__ ) */
|
||||||
|
|
||||||
|
/** USB lang indentifier descriptor. */
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
|
||||||
|
{
|
||||||
|
USB_LEN_LANGID_STR_DESC,
|
||||||
|
USB_DESC_TYPE_STRING,
|
||||||
|
LOBYTE(USBD_LANGID_STRING),
|
||||||
|
HIBYTE(USBD_LANGID_STRING)
|
||||||
|
};
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif /* defined ( __ICCARM__ ) */
|
||||||
|
/* Internal string descriptor. */
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
|
||||||
|
|
||||||
|
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
|
||||||
|
#pragma data_alignment=4
|
||||||
|
#endif
|
||||||
|
__ALIGN_BEGIN uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] __ALIGN_END = {
|
||||||
|
USB_SIZ_STRING_SERIAL,
|
||||||
|
USB_DESC_TYPE_STRING,
|
||||||
|
};
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
|
||||||
|
* @brief Private functions.
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the device descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
*length = sizeof(USBD_CDC_DeviceDesc);
|
||||||
|
return USBD_CDC_DeviceDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the LangID string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
*length = sizeof(USBD_LangIDDesc);
|
||||||
|
return USBD_LangIDDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the product string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
if(speed == 0)
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_PRODUCT_STRING, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_PRODUCT_STRING, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the manufacturer string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the serial number string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
UNUSED(speed);
|
||||||
|
*length = USB_SIZ_STRING_SERIAL;
|
||||||
|
|
||||||
|
/* Update the serial number string descriptor with the data from the unique
|
||||||
|
* ID */
|
||||||
|
Get_SerialNum();
|
||||||
|
|
||||||
|
/* USER CODE BEGIN USBD_CDC_SerialStrDescriptor */
|
||||||
|
|
||||||
|
/* USER CODE END USBD_CDC_SerialStrDescriptor */
|
||||||
|
|
||||||
|
return (uint8_t *) USBD_StringSerial;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the configuration string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
if(speed == USBD_SPEED_HIGH)
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Return the interface string descriptor
|
||||||
|
* @param speed : Current device speed
|
||||||
|
* @param length : Pointer to data length variable
|
||||||
|
* @retval Pointer to descriptor buffer
|
||||||
|
*/
|
||||||
|
uint8_t * USBD_CDC_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||||
|
{
|
||||||
|
if(speed == 0)
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_INTERFACE_STRING, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
USBD_GetString((uint8_t *)USBD_INTERFACE_STRING, USBD_StrDesc, length);
|
||||||
|
}
|
||||||
|
return USBD_StrDesc;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Create the serial number string descriptor
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void Get_SerialNum(void)
|
||||||
|
{
|
||||||
|
uint32_t deviceserial0, deviceserial1, deviceserial2;
|
||||||
|
|
||||||
|
deviceserial0 = *(uint32_t *) DEVICE_ID1;
|
||||||
|
deviceserial1 = *(uint32_t *) DEVICE_ID2;
|
||||||
|
deviceserial2 = *(uint32_t *) DEVICE_ID3;
|
||||||
|
|
||||||
|
deviceserial0 += deviceserial2;
|
||||||
|
|
||||||
|
if (deviceserial0 != 0)
|
||||||
|
{
|
||||||
|
IntToUnicode(deviceserial0, &USBD_StringSerial[2], 8);
|
||||||
|
IntToUnicode(deviceserial1, &USBD_StringSerial[18], 4);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Convert Hex 32Bits value into char
|
||||||
|
* @param value: value to convert
|
||||||
|
* @param pbuf: pointer to the buffer
|
||||||
|
* @param len: buffer length
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
static void IntToUnicode(uint32_t value, uint8_t * pbuf, uint8_t len)
|
||||||
|
{
|
||||||
|
uint8_t idx = 0;
|
||||||
|
|
||||||
|
for (idx = 0; idx < len; idx++)
|
||||||
|
{
|
||||||
|
if (((value >> 28)) < 0xA)
|
||||||
|
{
|
||||||
|
pbuf[2 * idx] = (value >> 28) + '0';
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
pbuf[2 * idx] = (value >> 28) + 'A' - 10;
|
||||||
|
}
|
||||||
|
|
||||||
|
value = value << 4;
|
||||||
|
|
||||||
|
pbuf[2 * idx + 1] = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
24
firmware/targets/f3/api-hal/api-hal-delay.c
Normal file
24
firmware/targets/f3/api-hal/api-hal-delay.c
Normal file
@ -0,0 +1,24 @@
|
|||||||
|
#include "api-hal-delay.h"
|
||||||
|
#include "assert.h"
|
||||||
|
#include "cmsis_os2.h"
|
||||||
|
|
||||||
|
void delay_us_init_DWT(void) {
|
||||||
|
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
|
||||||
|
DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
|
||||||
|
DWT->CYCCNT = 0U;
|
||||||
|
}
|
||||||
|
|
||||||
|
void delay_us(float microseconds) {
|
||||||
|
uint32_t start = DWT->CYCCNT;
|
||||||
|
uint32_t time_ticks = microseconds * (SystemCoreClock / 1000000.0f);
|
||||||
|
while((DWT->CYCCNT - start) < time_ticks) {
|
||||||
|
};
|
||||||
|
}
|
||||||
|
|
||||||
|
// cannot be used in ISR
|
||||||
|
// TODO add delay_ISR variant
|
||||||
|
void delay(float milliseconds) {
|
||||||
|
uint32_t ticks = milliseconds / (1000.0f / osKernelGetTickFreq());
|
||||||
|
osStatus_t result = osDelay(ticks);
|
||||||
|
assert(result == osOK);
|
||||||
|
}
|
6
firmware/targets/f3/api-hal/api-hal-delay.h
Normal file
6
firmware/targets/f3/api-hal/api-hal-delay.h
Normal file
@ -0,0 +1,6 @@
|
|||||||
|
#pragma once
|
||||||
|
#include "main.h"
|
||||||
|
|
||||||
|
void delay(float milliseconds);
|
||||||
|
void delay_us(float microseconds);
|
||||||
|
void delay_us_init_DWT(void);
|
14
firmware/targets/f3/api-hal/api-hal-gpio.c
Normal file
14
firmware/targets/f3/api-hal/api-hal-gpio.c
Normal file
@ -0,0 +1,14 @@
|
|||||||
|
#include "api-hal-gpio.h"
|
||||||
|
|
||||||
|
// init GPIO
|
||||||
|
void hal_gpio_init(GpioPin* gpio, GpioMode mode, GpioPull pull, GpioSpeed speed) {
|
||||||
|
// TODO: Alternate Functions
|
||||||
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||||
|
|
||||||
|
GPIO_InitStruct.Pin = gpio->pin;
|
||||||
|
GPIO_InitStruct.Mode = mode;
|
||||||
|
GPIO_InitStruct.Pull = pull;
|
||||||
|
GPIO_InitStruct.Speed = speed;
|
||||||
|
|
||||||
|
HAL_GPIO_Init(gpio->port, &GPIO_InitStruct);
|
||||||
|
}
|
61
firmware/targets/f3/api-hal/api-hal-gpio.h
Normal file
61
firmware/targets/f3/api-hal/api-hal-gpio.h
Normal file
@ -0,0 +1,61 @@
|
|||||||
|
#pragma once
|
||||||
|
#include "main.h"
|
||||||
|
#include "stdbool.h"
|
||||||
|
|
||||||
|
// this defined in xx_hal_gpio.c, so...
|
||||||
|
#define GPIO_NUMBER (16U)
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
GpioModeInput = GPIO_MODE_INPUT,
|
||||||
|
GpioModeOutputPushPull = GPIO_MODE_OUTPUT_PP,
|
||||||
|
GpioModeOutputOpenDrain = GPIO_MODE_OUTPUT_OD,
|
||||||
|
GpioModeAltFunctionPushPull = GPIO_MODE_AF_PP,
|
||||||
|
GpioModeAltFunctionOpenDrain = GPIO_MODE_AF_OD,
|
||||||
|
GpioModeAnalog = GPIO_MODE_ANALOG,
|
||||||
|
GpioModeInterruptRise = GPIO_MODE_IT_RISING,
|
||||||
|
GpioModeInterruptFall = GPIO_MODE_IT_FALLING,
|
||||||
|
GpioModeInterruptRiseFall = GPIO_MODE_IT_RISING_FALLING,
|
||||||
|
GpioModeEventRise = GPIO_MODE_EVT_RISING,
|
||||||
|
GpioModeEventFall = GPIO_MODE_EVT_FALLING,
|
||||||
|
GpioModeEventRiseFall = GPIO_MODE_EVT_RISING_FALLING,
|
||||||
|
} GpioMode;
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
GpioSpeedLow = GPIO_SPEED_FREQ_LOW,
|
||||||
|
GpioSpeedMedium = GPIO_SPEED_FREQ_MEDIUM,
|
||||||
|
GpioSpeedHigh = GPIO_SPEED_FREQ_HIGH,
|
||||||
|
GpioSpeedVeryHigh = GPIO_SPEED_FREQ_VERY_HIGH,
|
||||||
|
} GpioSpeed;
|
||||||
|
|
||||||
|
typedef enum {
|
||||||
|
GpioPullNo = GPIO_NOPULL,
|
||||||
|
GpioPullUp = GPIO_PULLUP,
|
||||||
|
GpioPullDown = GPIO_PULLDOWN,
|
||||||
|
} GpioPull;
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
GPIO_TypeDef* port;
|
||||||
|
uint16_t pin;
|
||||||
|
} GpioPin;
|
||||||
|
|
||||||
|
// init GPIO
|
||||||
|
void hal_gpio_init(GpioPin* gpio, GpioMode mode, GpioPull pull, GpioSpeed speed);
|
||||||
|
|
||||||
|
// write value to GPIO, false = LOW, true = HIGH
|
||||||
|
static inline void hal_gpio_write(GpioPin* gpio, bool state) {
|
||||||
|
// writing to BSSR is an atomic operation
|
||||||
|
if(state == true) {
|
||||||
|
gpio->port->BSRR = gpio->pin;
|
||||||
|
} else {
|
||||||
|
gpio->port->BSRR = (uint32_t)gpio->pin << GPIO_NUMBER;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// read value from GPIO, false = LOW, true = HIGH
|
||||||
|
static inline bool hal_gpio_read(const GpioPin* gpio) {
|
||||||
|
if((gpio->port->IDR & gpio->pin) != 0x00U) {
|
||||||
|
return true;
|
||||||
|
} else {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
57
firmware/targets/f3/api-hal/api-hal-pwm.c
Normal file
57
firmware/targets/f3/api-hal/api-hal-pwm.c
Normal file
@ -0,0 +1,57 @@
|
|||||||
|
#include "api-hal-pwm.h"
|
||||||
|
|
||||||
|
void hal_pwm_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel) {
|
||||||
|
tim->Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
tim->Init.Period = (uint32_t)((SystemCoreClock / (tim->Init.Prescaler + 1)) / freq);
|
||||||
|
tim->Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
tim->Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
HAL_TIM_PWM_Init(tim);
|
||||||
|
|
||||||
|
TIM_OC_InitTypeDef sConfigOC;
|
||||||
|
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
sConfigOC.Pulse = (uint16_t)(tim->Init.Period * value);
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||||
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||||
|
HAL_TIM_PWM_ConfigChannel(tim, &sConfigOC, channel);
|
||||||
|
HAL_TIM_PWM_Start(tim, channel);
|
||||||
|
}
|
||||||
|
|
||||||
|
void hal_pwmn_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel) {
|
||||||
|
tim->Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||||
|
tim->Init.Period = (uint32_t)((SystemCoreClock / (tim->Init.Prescaler + 1)) / freq - 1);
|
||||||
|
tim->Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||||
|
tim->Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
|
||||||
|
HAL_TIM_PWM_Init(tim);
|
||||||
|
|
||||||
|
TIM_OC_InitTypeDef sConfigOC;
|
||||||
|
|
||||||
|
sConfigOC.OCMode = TIM_OCMODE_PWM1;
|
||||||
|
sConfigOC.Pulse = (uint16_t)(tim->Init.Period * value);
|
||||||
|
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||||
|
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||||
|
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||||
|
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||||
|
HAL_TIM_PWM_ConfigChannel(tim, &sConfigOC, channel);
|
||||||
|
HAL_TIMEx_PWMN_Start(tim, channel);
|
||||||
|
}
|
||||||
|
|
||||||
|
void hal_pwm_stop(TIM_HandleTypeDef* tim, uint32_t channel) {
|
||||||
|
HAL_TIM_PWM_Stop(tim, channel);
|
||||||
|
}
|
||||||
|
|
||||||
|
void hal_pwmn_stop(TIM_HandleTypeDef* tim, uint32_t channel) {
|
||||||
|
HAL_TIMEx_PWMN_Stop(tim, channel);
|
||||||
|
}
|
||||||
|
|
||||||
|
void irda_pwm_set(float value, float freq){
|
||||||
|
hal_pwmn_set(value, freq, &IRDA_TIM, IRDA_CH);
|
||||||
|
}
|
||||||
|
|
||||||
|
void irda_pwm_stop(){
|
||||||
|
hal_pwmn_stop(&IRDA_TIM, IRDA_CH);
|
||||||
|
}
|
11
firmware/targets/f3/api-hal/api-hal-pwm.h
Normal file
11
firmware/targets/f3/api-hal/api-hal-pwm.h
Normal file
@ -0,0 +1,11 @@
|
|||||||
|
#pragma once
|
||||||
|
#include "main.h"
|
||||||
|
#include "stdbool.h"
|
||||||
|
|
||||||
|
void hal_pwm_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel);
|
||||||
|
void hal_pwmn_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel);
|
||||||
|
void hal_pwm_stop(TIM_HandleTypeDef* tim, uint32_t channel);
|
||||||
|
void hal_pwmn_stop(TIM_HandleTypeDef* tim, uint32_t channel);
|
||||||
|
|
||||||
|
void irda_pwm_set(float value, float freq);
|
||||||
|
void irda_pwm_stop();
|
27
firmware/targets/f3/api-hal/api-hal-resources.c
Normal file
27
firmware/targets/f3/api-hal/api-hal-resources.c
Normal file
@ -0,0 +1,27 @@
|
|||||||
|
#include "main.h"
|
||||||
|
#include "flipper_v2.h"
|
||||||
|
|
||||||
|
const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT] = {
|
||||||
|
{BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
|
||||||
|
{BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
|
||||||
|
{BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
|
||||||
|
{BUTTON_LEFT_GPIO_Port, BUTTON_LEFT_Pin},
|
||||||
|
{BUTTON_OK_GPIO_Port, BUTTON_OK_Pin},
|
||||||
|
{BUTTON_BACK_GPIO_Port, BUTTON_BACK_Pin},
|
||||||
|
};
|
||||||
|
|
||||||
|
const bool input_invert[GPIO_INPUT_PINS_COUNT] = {
|
||||||
|
true, // {BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
|
||||||
|
true, // {BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
|
||||||
|
true, // {BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
|
||||||
|
true, // {BUTTON_LEFT_GPIO_Port, BUTTON_LEFT_Pin},
|
||||||
|
true, // {BUTTON_OK_GPIO_Port, BUTTON_OK_Pin},
|
||||||
|
true, // {BUTTON_BACK_GPIO_Port, BUTTON_BACK_Pin},
|
||||||
|
};
|
||||||
|
|
||||||
|
const GpioPin led_gpio[3] = {
|
||||||
|
{LED_RED_GPIO_Port, LED_RED_Pin},
|
||||||
|
{LED_GREEN_GPIO_Port, LED_GREEN_Pin},
|
||||||
|
{LED_BLUE_GPIO_Port, LED_BLUE_Pin}};
|
||||||
|
|
||||||
|
const GpioPin backlight_gpio = {DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin};
|
12
firmware/targets/f3/api-hal/api-hal-resources.h
Normal file
12
firmware/targets/f3/api-hal/api-hal-resources.h
Normal file
@ -0,0 +1,12 @@
|
|||||||
|
#pragma once
|
||||||
|
#include "main.h"
|
||||||
|
#include "flipper_v2.h"
|
||||||
|
|
||||||
|
#define DEBOUNCE_TICKS 10
|
||||||
|
#define GPIO_INPUT_PINS_COUNT 6
|
||||||
|
|
||||||
|
extern const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT];
|
||||||
|
extern const bool input_invert[GPIO_INPUT_PINS_COUNT];
|
||||||
|
|
||||||
|
extern const GpioPin led_gpio[3];
|
||||||
|
extern const GpioPin backlight_gpio;
|
59
firmware/targets/f3/api-hal/api-hal-task.c
Normal file
59
firmware/targets/f3/api-hal/api-hal-task.c
Normal file
@ -0,0 +1,59 @@
|
|||||||
|
#include "cmsis_os.h"
|
||||||
|
#include "api-hal-task.h"
|
||||||
|
|
||||||
|
//-----------------------------cmsis_os2.c-------------------------------
|
||||||
|
// helpers to get isr context
|
||||||
|
// get arch
|
||||||
|
#ifndef __ARM_ARCH_6M__
|
||||||
|
#define __ARM_ARCH_6M__ 0
|
||||||
|
#endif
|
||||||
|
#ifndef __ARM_ARCH_7M__
|
||||||
|
#define __ARM_ARCH_7M__ 0
|
||||||
|
#endif
|
||||||
|
#ifndef __ARM_ARCH_7EM__
|
||||||
|
#define __ARM_ARCH_7EM__ 0
|
||||||
|
#endif
|
||||||
|
#ifndef __ARM_ARCH_8M_MAIN__
|
||||||
|
#define __ARM_ARCH_8M_MAIN__ 0
|
||||||
|
#endif
|
||||||
|
#ifndef __ARM_ARCH_7A__
|
||||||
|
#define __ARM_ARCH_7A__ 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// get masks
|
||||||
|
#if((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M_MAIN__ == 1U))
|
||||||
|
#define IS_IRQ_MASKED() ((__get_PRIMASK() != 0U) || (__get_BASEPRI() != 0U))
|
||||||
|
#elif(__ARM_ARCH_6M__ == 1U)
|
||||||
|
#define IS_IRQ_MASKED() (__get_PRIMASK() != 0U)
|
||||||
|
#elif(__ARM_ARCH_7A__ == 1U)
|
||||||
|
/* CPSR mask bits */
|
||||||
|
#define CPSR_MASKBIT_I 0x80U
|
||||||
|
|
||||||
|
#define IS_IRQ_MASKED() ((__get_CPSR() & CPSR_MASKBIT_I) != 0U)
|
||||||
|
#else
|
||||||
|
#define IS_IRQ_MASKED() (__get_PRIMASK() != 0U)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// get is irq mode
|
||||||
|
#if(__ARM_ARCH_7A__ == 1U)
|
||||||
|
/* CPSR mode bitmasks */
|
||||||
|
#define CPSR_MODE_USER 0x10U
|
||||||
|
#define CPSR_MODE_SYSTEM 0x1FU
|
||||||
|
|
||||||
|
#define IS_IRQ_MODE() ((__get_mode() != CPSR_MODE_USER) && (__get_mode() != CPSR_MODE_SYSTEM))
|
||||||
|
#else
|
||||||
|
#define IS_IRQ_MODE() (__get_IPSR() != 0U)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// added osKernelGetState(), because KernelState is a static var
|
||||||
|
#define IS_IRQ() (IS_IRQ_MODE() || (IS_IRQ_MASKED() && (osKernelGetState() == osKernelRunning)))
|
||||||
|
//-------------------------end of cmsis_os2.c----------------------------
|
||||||
|
|
||||||
|
bool task_is_isr_context(void) {
|
||||||
|
return IS_IRQ();
|
||||||
|
}
|
||||||
|
|
||||||
|
bool task_equal(TaskHandle_t a, TaskHandle_t b) {
|
||||||
|
if(a == NULL || b == NULL) return false;
|
||||||
|
return a == b;
|
||||||
|
}
|
7
firmware/targets/f3/api-hal/api-hal-task.h
Normal file
7
firmware/targets/f3/api-hal/api-hal-task.h
Normal file
@ -0,0 +1,7 @@
|
|||||||
|
#pragma once
|
||||||
|
#include "main.h"
|
||||||
|
#include <cmsis_os.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
|
||||||
|
bool task_equal(TaskHandle_t a, TaskHandle_t b);
|
||||||
|
bool task_is_isr_context(void);
|
6
firmware/targets/f3/api-hal/api-hal.h
Normal file
6
firmware/targets/f3/api-hal/api-hal.h
Normal file
@ -0,0 +1,6 @@
|
|||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "api-hal-gpio.h"
|
||||||
|
#include "api-hal-delay.h"
|
||||||
|
#include "api-hal-pwm.h"
|
||||||
|
#include "api-hal-task.h"
|
553
firmware/targets/f3/f3.ioc
Normal file
553
firmware/targets/f3/f3.ioc
Normal file
@ -0,0 +1,553 @@
|
|||||||
|
#MicroXplorer Configuration settings - do not modify
|
||||||
|
PA11.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
PB13.GPIOParameters=GPIO_Label
|
||||||
|
RCC.USART1Freq_Value=64000000
|
||||||
|
RF1.Locked=true
|
||||||
|
SPI1.VirtualType=VM_MASTER
|
||||||
|
PB10.GPIO_PuPd=GPIO_PULLUP
|
||||||
|
RF1.Signal=RF_RF1
|
||||||
|
SPI2.VirtualType=VM_MASTER
|
||||||
|
VP_ADC1_TempSens_Input.Mode=IN-TempSens
|
||||||
|
PC12.Locked=true
|
||||||
|
TIM1.IPParameters=Channel-Output Compare1 CH1N,Channel-PWM Generation3 CH3N
|
||||||
|
PC12.Signal=GPIO_Output
|
||||||
|
PB14.GPIO_Label=iBTN
|
||||||
|
PC6.GPIO_Label=DISPLAY_DI
|
||||||
|
VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
|
||||||
|
RCC.RTCFreq_Value=32768
|
||||||
|
PA3.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
|
||||||
|
PA6.GPIO_Label=PA6
|
||||||
|
PD0.Locked=true
|
||||||
|
PC5.Mode=INP
|
||||||
|
USART1.IPParameters=VirtualMode-Asynchronous
|
||||||
|
PA3.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||||
|
PB13.Signal=TIM1_CH1N
|
||||||
|
PA2.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
|
||||||
|
PC15-OSC32_OUT.GPIO_Label=QUARTZ_32MHZ_OUT
|
||||||
|
PinOutPanel.RotationAngle=0
|
||||||
|
RCC.MCO1PinFreq_Value=64000000
|
||||||
|
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
|
||||||
|
SH.GPXTI13.0=GPIO_EXTI13
|
||||||
|
RCC.LPTIM1Freq_Value=64000000
|
||||||
|
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
|
||||||
|
FREERTOS.configENABLE_FPU=1
|
||||||
|
NVIC.EXTI1_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
|
||||||
|
SH.S_TIM16_CH1.ConfNb=1
|
||||||
|
SPI1.Direction=SPI_DIRECTION_2LINES
|
||||||
|
TIM2.IPParameters=Channel-Input_Capture1_from_TI1,ICPolarity_CH1,AutoReloadPreload,Prescaler,Channel-Input_Capture2_from_TI1
|
||||||
|
RCC.APB2TimFreq_Value=64000000
|
||||||
|
PCC.Ble.PowerLevel=Min
|
||||||
|
PB6.Signal=USART1_TX
|
||||||
|
PB6.Mode=Asynchronous
|
||||||
|
SPI1.CalculateBaudRate=4.0 MBits/s
|
||||||
|
PC3.Signal=GPIO_Analog
|
||||||
|
PD0.Signal=GPIO_Output
|
||||||
|
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
|
||||||
|
RCC.PREFETCH_ENABLE=1
|
||||||
|
PB13.Locked=true
|
||||||
|
NVIC.EXTI15_10_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
|
||||||
|
ProjectManager.ProjectBuild=false
|
||||||
|
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||||
|
PB2.Signal=GPIO_Analog
|
||||||
|
PB3.Mode=Full_Duplex_Master
|
||||||
|
PH3-BOOT0.Locked=true
|
||||||
|
PA8.Locked=true
|
||||||
|
PD1.GPIOParameters=GPIO_Label
|
||||||
|
RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
|
||||||
|
SH.GPXTI12.0=GPIO_EXTI12
|
||||||
|
PD1.GPIO_Label=SPI_D_SCK
|
||||||
|
PB12.GPIO_Label=BUTTON_RIGHT
|
||||||
|
ProjectManager.FirmwarePackage=STM32Cube FW_WB V1.9.0
|
||||||
|
VP_ADC1_Vref_Input.Mode=IN-Vrefint
|
||||||
|
MxDb.Version=DB.6.0.0
|
||||||
|
PB0.GPIOParameters=GPIO_Label
|
||||||
|
PA1.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
|
||||||
|
ProjectManager.BackupPrevious=false
|
||||||
|
VP_SYS_VS_tim17.Signal=SYS_VS_tim17
|
||||||
|
PC4.GPIO_Label=CC1101_G0
|
||||||
|
FREERTOS.HEAP_NUMBER=4
|
||||||
|
PB1.GPIO_Label=BUTTON_DOWN
|
||||||
|
NVIC.TIM2_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true
|
||||||
|
SPI1.DataSize=SPI_DATASIZE_8BIT
|
||||||
|
PE4.GPIO_Label=NFC_CS
|
||||||
|
SPI2.CalculateBaudRate=4.0 MBits/s
|
||||||
|
PA8.Signal=GPXTI8
|
||||||
|
RCC.PLLRCLKFreq_Value=64000000
|
||||||
|
SH.GPXTI11.ConfNb=1
|
||||||
|
PB6.Locked=true
|
||||||
|
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
|
||||||
|
ProjectManager.HalAssertFull=false
|
||||||
|
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
|
||||||
|
VP_TIM1_VS_ClockSourceINT.Mode=Internal
|
||||||
|
TIM16.Pulse=145
|
||||||
|
PA0.Signal=S_TIM2_CH1
|
||||||
|
PH3-BOOT0.Signal=GPIO_Analog
|
||||||
|
NVIC.HSEM_IRQn=true\:5\:0\:true\:false\:true\:true\:false\:true
|
||||||
|
PB9.Signal=TIM1_CH3N
|
||||||
|
Mcu.Package=VFQFPN68
|
||||||
|
TIM2.Prescaler=64-1
|
||||||
|
PB1.Signal=GPXTI1
|
||||||
|
NVIC.TimeBase=TIM1_TRG_COM_TIM17_IRQn
|
||||||
|
SPI2.Mode=SPI_MODE_MASTER
|
||||||
|
PA2.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
|
||||||
|
SH.GPXTI11.0=GPIO_EXTI11
|
||||||
|
SH.GPXTI8.0=GPIO_EXTI8
|
||||||
|
PA14.Locked=true
|
||||||
|
SH.GPXTI8.ConfNb=1
|
||||||
|
NVIC.TimeBaseIP=TIM17
|
||||||
|
RCC.LSCOPinFreq_Value=32000
|
||||||
|
PA10.Signal=I2C1_SDA
|
||||||
|
VP_RTC_VS_RTC_Calendar.Mode=RTC_Calendar
|
||||||
|
FREERTOS.FootprintOK=true
|
||||||
|
PA1.PinState=GPIO_PIN_SET
|
||||||
|
PA5.GPIOParameters=GPIO_Label
|
||||||
|
NVIC.USB_LP_IRQn=true\:5\:0\:true\:false\:true\:true\:false\:true
|
||||||
|
PB14.GPIOParameters=GPIO_Label
|
||||||
|
VP_HSEM_VS_HSEM.Mode=HSEM_Activate
|
||||||
|
NVIC.EXTI2_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
|
||||||
|
RCC.PLLPoutputFreq_Value=64000000
|
||||||
|
RCC.APB1TimFreq_Value=64000000
|
||||||
|
FREERTOS.configGENERATE_RUN_TIME_STATS=1
|
||||||
|
NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||||
|
RCC.LPUART1Freq_Value=64000000
|
||||||
|
PB10.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
|
||||||
|
PB13.Mode=Output Compare1 CH1N
|
||||||
|
TIM16.Prescaler=500 - 1
|
||||||
|
PC15-OSC32_OUT.GPIOParameters=GPIO_Label
|
||||||
|
I2C1.CustomTiming=Disabled
|
||||||
|
PA4.GPIO_Label=PA4
|
||||||
|
ProjectManager.CustomerFirmwarePackage=
|
||||||
|
PC4.GPIOParameters=GPIO_Label
|
||||||
|
RCC.HSI48_VALUE=48000000
|
||||||
|
PC2.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
|
||||||
|
PA6.GPIOParameters=GPIO_Label
|
||||||
|
SH.GPXTI10.0=GPIO_EXTI10
|
||||||
|
PCC.Ble.Mode=NOT_SELECTED
|
||||||
|
RCC.PLLQoutputFreq_Value=64000000
|
||||||
|
ProjectManager.ProjectFileName=f3.ioc
|
||||||
|
RCC.SMPSFreq_Value=8000000
|
||||||
|
PA3.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
|
||||||
|
FREERTOS.Tasks01=defaultTask,24,1024,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;app_main,8,1024,app,As external,NULL,Dynamic,NULL,NULL
|
||||||
|
ADC1.Rank-0\#ChannelRegularConversion=1
|
||||||
|
PA15.GPIOParameters=GPIO_PuPd,GPIO_Label
|
||||||
|
Mcu.PinsNb=64
|
||||||
|
PC11.Locked=true
|
||||||
|
VP_SYS_VS_tim17.Mode=TIM17
|
||||||
|
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,master
|
||||||
|
PC13.Locked=true
|
||||||
|
ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
|
||||||
|
RCC.HCLK3Freq_Value=64000000
|
||||||
|
PA9.GPIO_Label=I2C_SCL
|
||||||
|
PC13.Signal=GPXTI13
|
||||||
|
FREERTOS.configCHECK_FOR_STACK_OVERFLOW=1
|
||||||
|
PC2.Signal=GPXTI2
|
||||||
|
PC6.Signal=GPIO_Output
|
||||||
|
PB11.GPIO_Label=BUTTON_LEFT
|
||||||
|
PD1.Signal=SPI2_SCK
|
||||||
|
SH.S_TIM16_CH1.0=TIM16_CH1,PWM Generation1 CH1
|
||||||
|
VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
|
||||||
|
SPI1.CLKPhase=SPI_PHASE_2EDGE
|
||||||
|
OSC_IN.Locked=true
|
||||||
|
RCC.HCLK2Freq_Value=32000000
|
||||||
|
PC0.Signal=GPIO_Analog
|
||||||
|
PC14-OSC32_IN.Signal=RCC_OSC32_IN
|
||||||
|
PC11.GPIOParameters=PinState,GPIO_Label
|
||||||
|
Mcu.Pin62=VP_TIM16_VS_ClockSourceINT
|
||||||
|
Mcu.Pin63=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
|
||||||
|
Mcu.Pin60=VP_TIM1_VS_ClockSourceINT
|
||||||
|
Mcu.Pin61=VP_TIM2_VS_ClockSourceINT
|
||||||
|
PD0.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
PC3.GPIOParameters=GPIO_Label
|
||||||
|
PB8.GPIO_Label=SPEAKER
|
||||||
|
PA11.Locked=true
|
||||||
|
PA15.Locked=true
|
||||||
|
PA8.GPIO_Label=RFID_PULL
|
||||||
|
PC15-OSC32_OUT.Locked=true
|
||||||
|
Mcu.Pin59=VP_SYS_VS_tim17
|
||||||
|
SH.GPXTI2.ConfNb=1
|
||||||
|
Mcu.Pin57=VP_RTC_VS_RTC_Activate
|
||||||
|
Mcu.Pin58=VP_RTC_VS_RTC_Calendar
|
||||||
|
PC12.PinState=GPIO_PIN_SET
|
||||||
|
USB_DEVICE.PRODUCT_STRING_CDC_FS=Flipper Control Virtual ComPort
|
||||||
|
Mcu.Pin51=PB7
|
||||||
|
Mcu.Pin52=VP_ADC1_TempSens_Input
|
||||||
|
Mcu.Pin50=PB6
|
||||||
|
Mcu.Pin55=VP_FREERTOS_VS_CMSIS_V2
|
||||||
|
Mcu.Pin56=VP_HSEM_VS_HSEM
|
||||||
|
Mcu.Pin53=VP_ADC1_Vref_Input
|
||||||
|
Mcu.Pin54=VP_COMP1_VS_VREFINT12
|
||||||
|
PC6.Locked=true
|
||||||
|
PA9.Signal=I2C1_SCL
|
||||||
|
VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
|
||||||
|
I2C1.Timing=0x10707DBC
|
||||||
|
PB11.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
|
||||||
|
PB9.Locked=true
|
||||||
|
PB5.Locked=true
|
||||||
|
OSC_IN.Signal=RCC_OSC_IN
|
||||||
|
Mcu.Pin48=PB4
|
||||||
|
Mcu.Pin49=PB5
|
||||||
|
RCC.PLLSAI1PoutputFreq_Value=48000000
|
||||||
|
Mcu.Pin46=PD1
|
||||||
|
Mcu.Pin47=PB3
|
||||||
|
PB10.Signal=GPXTI10
|
||||||
|
PB14.Signal=GPIO_Analog
|
||||||
|
PA5.Signal=GPIO_Analog
|
||||||
|
Mcu.Pin40=PA14
|
||||||
|
Mcu.Pin41=PA15
|
||||||
|
Mcu.Pin44=PC12
|
||||||
|
Mcu.Pin45=PD0
|
||||||
|
Mcu.Pin42=PC10
|
||||||
|
Mcu.Pin43=PC11
|
||||||
|
RCC.Cortex2Freq_Value=32000000
|
||||||
|
ProjectManager.LastFirmware=true
|
||||||
|
PD1.Mode=TX_Only_Simplex_Unidirect_Master
|
||||||
|
Mcu.Pin37=PA11
|
||||||
|
PB4.GPIO_Label=SPI_R_MISO
|
||||||
|
PCC.Ble.DataLength=6
|
||||||
|
Mcu.Pin38=PA12
|
||||||
|
Mcu.Pin35=PC6
|
||||||
|
PB15.GPIO_Label=SPI_D_MOSI
|
||||||
|
RCC.I2C1Freq_Value=64000000
|
||||||
|
Mcu.Pin36=PA10
|
||||||
|
SPI1.Mode=SPI_MODE_MASTER
|
||||||
|
Mcu.Pin39=PA13
|
||||||
|
RCC.LCDFreq_Value=32768
|
||||||
|
RCC.RNGFreq_Value=32000
|
||||||
|
PC2.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
|
||||||
|
VP_ADC1_TempSens_Input.Signal=ADC1_TempSens_Input
|
||||||
|
Mcu.Pin30=PE4
|
||||||
|
PA1.GPIO_Label=LED_RED
|
||||||
|
Mcu.Pin33=PB14
|
||||||
|
Mcu.Pin34=PB15
|
||||||
|
Mcu.Pin31=PB12
|
||||||
|
Mcu.Pin32=PB13
|
||||||
|
PA9.Locked=true
|
||||||
|
VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
|
||||||
|
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
|
||||||
|
PC10.GPIOParameters=GPIO_Label
|
||||||
|
PA13.Mode=Serial_Wire
|
||||||
|
ProjectManager.FreePins=false
|
||||||
|
PB10.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
|
||||||
|
RCC.LPTIM2Freq_Value=64000000
|
||||||
|
Mcu.Pin26=OSC_OUT
|
||||||
|
Mcu.Pin27=OSC_IN
|
||||||
|
Mcu.Pin24=PB11
|
||||||
|
ProjectManager.UnderRoot=false
|
||||||
|
Mcu.Pin25=RF1
|
||||||
|
Mcu.Pin28=PB0
|
||||||
|
Mcu.Pin29=PB1
|
||||||
|
PB4.Locked=true
|
||||||
|
PA4.Signal=GPIO_Analog
|
||||||
|
Mcu.Pin22=PB2
|
||||||
|
PB5.Signal=SPI1_MOSI
|
||||||
|
Mcu.Pin23=PB10
|
||||||
|
Mcu.Pin20=PC4
|
||||||
|
ADC1.master=1
|
||||||
|
PA3.Locked=true
|
||||||
|
Mcu.Pin21=PC5
|
||||||
|
PA5.GPIO_Label=PA5
|
||||||
|
PA10.Locked=true
|
||||||
|
NVIC.ForceEnableDMAVector=true
|
||||||
|
OSC_IN.Mode=HSE-External-Oscillator
|
||||||
|
NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||||
|
PC12.GPIO_Label=SD_CS
|
||||||
|
ProjectManager.CompilerOptimize=6
|
||||||
|
PA11.Signal=USB_DM
|
||||||
|
ProjectManager.HeapSize=0x200
|
||||||
|
PA0.GPIOParameters=GPIO_Label
|
||||||
|
Mcu.Pin15=PA5
|
||||||
|
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||||
|
Mcu.Pin16=PA6
|
||||||
|
Mcu.Pin13=PA3
|
||||||
|
Mcu.Pin14=PA4
|
||||||
|
Mcu.Pin19=PA9
|
||||||
|
ProjectManager.ComputerToolchain=false
|
||||||
|
Mcu.Pin17=PA7
|
||||||
|
Mcu.Pin18=PA8
|
||||||
|
NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
|
||||||
|
Mcu.Pin11=PA1
|
||||||
|
Mcu.Pin12=PA2
|
||||||
|
PD0.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
|
||||||
|
Mcu.Pin10=PA0
|
||||||
|
SH.GPXTI10.ConfNb=1
|
||||||
|
TIM2.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE
|
||||||
|
PC3.GPIO_Label=PC3
|
||||||
|
PA3.PinState=GPIO_PIN_SET
|
||||||
|
PE4.PinState=GPIO_PIN_SET
|
||||||
|
RCC.PWRFreq_Value=64000000
|
||||||
|
SPI2.DataSize=SPI_DATASIZE_8BIT
|
||||||
|
SH.GPXTI1.ConfNb=1
|
||||||
|
PB12.GPIO_PuPd=GPIO_PULLUP
|
||||||
|
PD1.Locked=true
|
||||||
|
PB0.Signal=GPIO_Output
|
||||||
|
PA7.GPIOParameters=GPIO_Label
|
||||||
|
PC1.Signal=GPIO_Analog
|
||||||
|
PB12.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
|
||||||
|
Mcu.Family=STM32WB
|
||||||
|
SH.GPXTI1.0=GPIO_EXTI1
|
||||||
|
ProjectManager.MainLocation=Src
|
||||||
|
OSC_OUT.GPIO_Label=QUARTZ_32KHZ_OUT
|
||||||
|
USB_DEVICE.CLASS_NAME_FS=CDC
|
||||||
|
RCC.SAI1Freq_Value=48000000
|
||||||
|
RCC.CortexFreq_Value=64000000
|
||||||
|
TIM2.Channel-Input_Capture1_from_TI1=TIM_CHANNEL_1
|
||||||
|
ProjectManager.KeepUserCode=true
|
||||||
|
Mcu.UserName=STM32WB55RGVx
|
||||||
|
RCC.RFWKPFreq_Value=976.5625
|
||||||
|
PC10.Signal=GPIO_Analog
|
||||||
|
RCC.PLLSAI1RoutputFreq_Value=48000000
|
||||||
|
PC5.Locked=true
|
||||||
|
PA0.GPIO_Label=IR_RX
|
||||||
|
PA12.GPIOParameters=GPIO_Speed
|
||||||
|
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_ADC1_Init-ADC1-false-HAL-true,4-MX_I2C1_Init-I2C1-false-HAL-true,5-MX_RTC_Init-RTC-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_USART1_UART_Init-USART1-false-HAL-true,9-MX_USB_Device_Init-USB_DEVICE-false-HAL-false,10-MX_TIM1_Init-TIM1-false-HAL-true,11-MX_TIM2_Init-TIM2-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_COMP1_Init-COMP1-false-HAL-true,14-MX_RF_Init-RF-false-HAL-true,0-MX_HSEM_Init-HSEM-false-HAL-true
|
||||||
|
PC0.GPIOParameters=GPIO_Label
|
||||||
|
PA9.GPIOParameters=GPIO_Speed,GPIO_Label
|
||||||
|
PA2.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||||
|
PH3-BOOT0.GPIO_Label=BOOT0
|
||||||
|
PA11.GPIOParameters=GPIO_Speed
|
||||||
|
PD0.GPIO_Label=CC1101_CS
|
||||||
|
PC0.GPIO_Label=PC0
|
||||||
|
PA11.Mode=Device
|
||||||
|
PB0.GPIO_Label=DISPLAY_RST
|
||||||
|
VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar
|
||||||
|
PB11.GPIO_PuPd=GPIO_PULLUP
|
||||||
|
VP_COMP1_VS_VREFINT12.Signal=COMP1_VS_VREFINT12
|
||||||
|
PC13.GPIO_Label=BUTTON_BACK
|
||||||
|
PB13.GPIO_Label=RFID_OUT
|
||||||
|
PB11.Signal=GPXTI11
|
||||||
|
PB15.Signal=SPI2_MOSI
|
||||||
|
OSC_OUT.GPIOParameters=GPIO_Label
|
||||||
|
ProjectManager.StackSize=0x400
|
||||||
|
PB5.GPIOParameters=GPIO_Label
|
||||||
|
VP_FREERTOS_VS_CMSIS_V2.Mode=CMSIS_V2
|
||||||
|
SH.GPXTI2.0=GPIO_EXTI2
|
||||||
|
RCC.I2C3Freq_Value=64000000
|
||||||
|
Mcu.IP4=I2C1
|
||||||
|
Mcu.IP5=NVIC
|
||||||
|
RCC.FCLKCortexFreq_Value=64000000
|
||||||
|
USB_DEVICE.MANUFACTURER_STRING=Flipper
|
||||||
|
Mcu.IP2=FREERTOS
|
||||||
|
I2C1.IPParameters=Timing,CustomTiming
|
||||||
|
Mcu.IP3=HSEM
|
||||||
|
Mcu.IP0=ADC1
|
||||||
|
PB4.GPIOParameters=GPIO_Label
|
||||||
|
PA15.GPIO_Label=DISPLAY_BACKLIGHT
|
||||||
|
PA12.Locked=true
|
||||||
|
Mcu.IP1=COMP1
|
||||||
|
PA12.Signal=USB_DP
|
||||||
|
PE4.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
|
||||||
|
Mcu.UserConstants=
|
||||||
|
RCC.VCOSAI1OutputFreq_Value=96000000
|
||||||
|
TIM2.ICPolarity_CH1=TIM_INPUTCHANNELPOLARITY_FALLING
|
||||||
|
PC1.GPIOParameters=GPIO_Label
|
||||||
|
SH.GPXTI13.ConfNb=1
|
||||||
|
Mcu.ThirdPartyNb=0
|
||||||
|
PB1.GPIO_PuPd=GPIO_PULLUP
|
||||||
|
RCC.HCLKFreq_Value=64000000
|
||||||
|
Mcu.IPNb=18
|
||||||
|
ProjectManager.PreviousToolchain=
|
||||||
|
PB1.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
|
||||||
|
PA8.GPIOParameters=GPIO_Label
|
||||||
|
Mcu.Pin6=PC0
|
||||||
|
Mcu.Pin7=PC1
|
||||||
|
Mcu.Pin8=PC2
|
||||||
|
Mcu.Pin9=PC3
|
||||||
|
OSC_OUT.Mode=HSE-External-Oscillator
|
||||||
|
FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE,HEAP_NUMBER,configUSE_TIMERS,configUSE_IDLE_HOOK,FootprintOK,configCHECK_FOR_STACK_OVERFLOW,configRECORD_STACK_HIGH_ADDRESS,configGENERATE_RUN_TIME_STATS,configENABLE_FPU
|
||||||
|
OSC_OUT.Signal=RCC_OSC_OUT
|
||||||
|
RCC.AHBFreq_Value=64000000
|
||||||
|
SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
|
||||||
|
Mcu.Pin0=PC13
|
||||||
|
Mcu.Pin1=PC14-OSC32_IN
|
||||||
|
GPIO.groupedBy=Show All
|
||||||
|
Mcu.Pin2=PC15-OSC32_OUT
|
||||||
|
Mcu.Pin3=PH3-BOOT0
|
||||||
|
Mcu.Pin4=PB8
|
||||||
|
Mcu.Pin5=PB9
|
||||||
|
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_TEMPSENSOR
|
||||||
|
RCC.HSE_VALUE=32000000
|
||||||
|
RCC.FCLK2Freq_Value=32000000
|
||||||
|
FREERTOS.configUSE_TIMERS=1
|
||||||
|
NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
|
||||||
|
PH3-BOOT0.GPIOParameters=GPIO_Label
|
||||||
|
Mcu.IP10=SPI2
|
||||||
|
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
|
||||||
|
Mcu.IP12=TIM1
|
||||||
|
Mcu.IP11=SYS
|
||||||
|
Mcu.IP17=USB_DEVICE
|
||||||
|
NVIC.TIM1_TRG_COM_TIM17_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
|
||||||
|
PA2.PinState=GPIO_PIN_SET
|
||||||
|
Mcu.IP14=TIM16
|
||||||
|
PB4.Mode=Full_Duplex_Master
|
||||||
|
Mcu.IP13=TIM2
|
||||||
|
Mcu.IP16=USB
|
||||||
|
Mcu.IP15=USART1
|
||||||
|
PC14-OSC32_IN.Mode=LSE-External-Oscillator
|
||||||
|
RCC.VCOInputFreq_Value=16000000
|
||||||
|
PD0.PinState=GPIO_PIN_SET
|
||||||
|
PA14.Mode=Serial_Wire
|
||||||
|
PE4.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
PC11.GPIO_Label=DISPLAY_CS
|
||||||
|
PB5.Mode=Full_Duplex_Master
|
||||||
|
File.Version=6
|
||||||
|
PA10.GPIO_Label=I2C_SDA
|
||||||
|
PC13.GPIO_PuPd=GPIO_PULLUP
|
||||||
|
PB3.GPIOParameters=GPIO_Label
|
||||||
|
SH.S_TIM2_CH1.ConfNb=2
|
||||||
|
PB7.Signal=USART1_RX
|
||||||
|
PB8.Locked=true
|
||||||
|
PE4.Signal=GPIO_Output
|
||||||
|
PB0.Locked=true
|
||||||
|
FREERTOS.configTOTAL_HEAP_SIZE=40960
|
||||||
|
PC14-OSC32_IN.GPIOParameters=GPIO_Label
|
||||||
|
VP_COMP1_VS_VREFINT12.Mode=VREFINT_12
|
||||||
|
ProjectManager.ProjectName=f3
|
||||||
|
RCC.APB3Freq_Value=16000000
|
||||||
|
PA6.Signal=GPIO_Analog
|
||||||
|
TIM2.Channel-Input_Capture2_from_TI1=TIM_CHANNEL_2
|
||||||
|
RCC.EnbaleCSS=true
|
||||||
|
ProjectManager.ToolChainLocation=
|
||||||
|
PA2.GPIO_Label=LED_GREEN
|
||||||
|
RCC.LSI_VALUE=32000
|
||||||
|
PB11.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
|
||||||
|
PA15.Signal=GPIO_Output
|
||||||
|
VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
|
||||||
|
RCC.MSIOscState=DISABLED
|
||||||
|
SPI2.CLKPhase=SPI_PHASE_1EDGE
|
||||||
|
PA10.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
PB5.GPIO_Label=SPI_R_MOSI
|
||||||
|
PC4.Locked=true
|
||||||
|
PC14-OSC32_IN.GPIO_Label=QUARTZ_32MHZ_IN
|
||||||
|
SPI2.Direction=SPI_DIRECTION_2LINES
|
||||||
|
PC5.Signal=COMP1_INP
|
||||||
|
SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
|
||||||
|
OSC_IN.GPIO_Label=QUARTZ_32KHZ_IN
|
||||||
|
PC2.GPIO_Label=BUTTON_OK
|
||||||
|
PC14-OSC32_IN.Locked=true
|
||||||
|
PA12.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
PB15.Locked=true
|
||||||
|
PB3.Locked=true
|
||||||
|
PB4.Signal=SPI1_MISO
|
||||||
|
RCC.PLLSAI1N=6
|
||||||
|
PA3.Signal=GPIO_Output
|
||||||
|
PA2.Locked=true
|
||||||
|
PB3.GPIO_Label=SPI_R_SCK
|
||||||
|
VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
|
||||||
|
RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
|
||||||
|
PC15-OSC32_OUT.Mode=LSE-External-Oscillator
|
||||||
|
SH.S_TIM2_CH1.1=TIM2_CH1,Input_Capture2_from_TI1
|
||||||
|
SH.S_TIM2_CH1.0=TIM2_CH1,Input_Capture1_from_TI1
|
||||||
|
PB8.GPIOParameters=GPIO_Label
|
||||||
|
PB9.GPIO_Label=IR_TX
|
||||||
|
PC10.GPIO_Label=PC10
|
||||||
|
PA10.Mode=I2C
|
||||||
|
ProjectManager.NoMain=false
|
||||||
|
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,BaudRatePrescaler,DataSize,CLKPhase
|
||||||
|
USB_DEVICE.VirtualModeFS=Cdc_FS
|
||||||
|
NVIC.SavedSvcallIrqHandlerGenerated=false
|
||||||
|
PC11.Signal=GPIO_Output
|
||||||
|
PC4.Signal=GPIO_Input
|
||||||
|
ProjectManager.DefaultFWLocation=true
|
||||||
|
VP_HSEM_VS_HSEM.Signal=HSEM_VS_HSEM
|
||||||
|
OSC_IN.GPIOParameters=GPIO_Label
|
||||||
|
PB12.Locked=true
|
||||||
|
ProjectManager.DeletePrevious=true
|
||||||
|
PB10.Locked=true
|
||||||
|
USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS,MANUFACTURER_STRING,PRODUCT_STRING_CDC_FS
|
||||||
|
TIM16.Channel=TIM_CHANNEL_1
|
||||||
|
RCC.AHB2CLKDivider=RCC_SYSCLK_DIV2
|
||||||
|
RCC.FamilyName=M
|
||||||
|
PB9.GPIOParameters=GPIO_Label
|
||||||
|
PC12.GPIOParameters=GPIO_Speed,PinState,GPIO_Label
|
||||||
|
USART1.VirtualMode-Asynchronous=VM_ASYNC
|
||||||
|
PA13.Signal=SYS_JTMS-SWDIO
|
||||||
|
FREERTOS.configUSE_IDLE_HOOK=1
|
||||||
|
PA9.Mode=I2C
|
||||||
|
TIM1.Channel-Output\ Compare1\ CH1N=TIM_CHANNEL_1
|
||||||
|
FREERTOS.configRECORD_STACK_HIGH_ADDRESS=1
|
||||||
|
ProjectManager.TargetToolchain=Makefile
|
||||||
|
PB10.GPIO_Label=BUTTON_UP
|
||||||
|
VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
|
||||||
|
RCC.HCLKRFFreq_Value=16000000
|
||||||
|
PC5.GPIOParameters=GPIO_Label
|
||||||
|
PB9.Mode=PWM Generation3 CH3N
|
||||||
|
PB2.GPIOParameters=GPIO_Label
|
||||||
|
SH.GPXTI12.ConfNb=1
|
||||||
|
PE4.Locked=true
|
||||||
|
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPhase
|
||||||
|
PC2.Locked=true
|
||||||
|
ProjectManager.RegisterCallBack=
|
||||||
|
RCC.USBFreq_Value=48000000
|
||||||
|
TIM1.Channel-PWM\ Generation3\ CH3N=TIM_CHANNEL_3
|
||||||
|
PC15-OSC32_OUT.Signal=RCC_OSC32_OUT
|
||||||
|
PA1.Signal=GPIO_Output
|
||||||
|
PB1.Locked=true
|
||||||
|
RCC.SMPSCLockSelectionVirtual=RCC_SMPSCLKSOURCE_HSE
|
||||||
|
board=custom
|
||||||
|
RCC.VCOOutputFreq_Value=128000000
|
||||||
|
RCC.SMPS1Freq_Value=16000000
|
||||||
|
PB15.Mode=TX_Only_Simplex_Unidirect_Master
|
||||||
|
TIM16.Period=291
|
||||||
|
NVIC.SavedSystickIrqHandlerGenerated=true
|
||||||
|
RCC.APB2Freq_Value=64000000
|
||||||
|
PC11.PinState=GPIO_PIN_SET
|
||||||
|
MxCube.Version=6.0.1
|
||||||
|
VP_TIM2_VS_ClockSourceINT.Mode=Internal
|
||||||
|
PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
|
||||||
|
PA1.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||||
|
RCC.PLLSAI1QoutputFreq_Value=48000000
|
||||||
|
RCC.ADCFreq_Value=48000000
|
||||||
|
PC1.GPIO_Label=PC1
|
||||||
|
PA10.GPIOParameters=GPIO_Speed,GPIO_Label
|
||||||
|
VP_ADC1_Vref_Input.Signal=ADC1_Vref_Input
|
||||||
|
OSC_OUT.Locked=true
|
||||||
|
PA4.GPIOParameters=GPIO_Label
|
||||||
|
PC2.GPIO_PuPd=GPIO_PULLUP
|
||||||
|
PB15.GPIOParameters=GPIO_Label
|
||||||
|
RCC.IPParameters=ADCFreq_Value,AHB2CLKDivider,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,APB3Freq_Value,Cortex2Freq_Value,CortexFreq_Value,EnbaleCSS,FCLK2Freq_Value,FCLKCortexFreq_Value,FamilyName,HCLK2Freq_Value,HCLK3Freq_Value,HCLKFreq_Value,HCLKRFFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSIOscState,PLLM,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RFWKPFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SMPS1Freq_Value,SMPSCLockSelectionVirtual,SMPSFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,USART1Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value
|
||||||
|
ProjectManager.AskForMigrate=true
|
||||||
|
Mcu.Name=STM32WB55RGVx
|
||||||
|
NVIC.SavedPendsvIrqHandlerGenerated=false
|
||||||
|
PA2.Signal=GPIO_Output
|
||||||
|
Mcu.IP8=RTC
|
||||||
|
VP_FREERTOS_VS_CMSIS_V2.Signal=FREERTOS_VS_CMSIS_V2
|
||||||
|
Mcu.IP9=SPI1
|
||||||
|
Mcu.IP6=RCC
|
||||||
|
Mcu.IP7=RF
|
||||||
|
ProjectManager.CoupleFile=true
|
||||||
|
PB3.Signal=SPI1_SCK
|
||||||
|
RCC.SYSCLKFreq_VALUE=64000000
|
||||||
|
PA7.GPIO_Label=PA7
|
||||||
|
PA1.Locked=true
|
||||||
|
PA12.Mode=Device
|
||||||
|
PCC.Ble.ConnectionInterval=1000.0
|
||||||
|
KeepUserPlacement=false
|
||||||
|
PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
|
||||||
|
PC5.GPIO_Label=RFID_RF_IN
|
||||||
|
PA13.Locked=true
|
||||||
|
RF1.Mode=RF1_Activate
|
||||||
|
PB7.Mode=Asynchronous
|
||||||
|
NVIC.EXTI9_5_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
|
||||||
|
PA14.Signal=SYS_JTCK-SWCLK
|
||||||
|
PB2.GPIO_Label=PB2
|
||||||
|
PC6.GPIOParameters=GPIO_Label
|
||||||
|
PB12.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
|
||||||
|
RCC.HSI_VALUE=16000000
|
||||||
|
ADC1.NbrOfConversionFlag=1
|
||||||
|
RCC.PLLM=RCC_PLLM_DIV2
|
||||||
|
PA15.GPIO_PuPd=GPIO_PULLDOWN
|
||||||
|
PB7.Locked=true
|
||||||
|
PB8.Signal=S_TIM16_CH1
|
||||||
|
PA9.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
TIM16.IPParameters=Channel,Pulse,Prescaler,Period
|
||||||
|
RCC.APB1Freq_Value=64000000
|
||||||
|
PC12.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
|
||||||
|
USB_DEVICE.VirtualMode=Cdc
|
||||||
|
PB11.Locked=true
|
||||||
|
ProjectManager.DeviceId=STM32WB55RGVx
|
||||||
|
PB12.Signal=GPXTI12
|
||||||
|
ProjectManager.LibraryCopy=2
|
||||||
|
PA3.GPIO_Label=LED_BLUE
|
||||||
|
PB1.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
|
||||||
|
PA7.Signal=GPIO_Analog
|
||||||
|
PA1.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
|
445
firmware/targets/f3/startup_stm32wb55xx_cm4.s
Normal file
445
firmware/targets/f3/startup_stm32wb55xx_cm4.s
Normal file
@ -0,0 +1,445 @@
|
|||||||
|
/**
|
||||||
|
******************************************************************************
|
||||||
|
* @file startup_stm32wb55xx_cm4.s
|
||||||
|
* @author MCD Application Team
|
||||||
|
* @brief STM32WB55xx devices vector table GCC toolchain.
|
||||||
|
* This module performs:
|
||||||
|
* - Set the initial SP
|
||||||
|
* - Set the initial PC == Reset_Handler,
|
||||||
|
* - Set the vector table entries with the exceptions ISR address
|
||||||
|
* - Branches to main in the C library (which eventually
|
||||||
|
* calls main()).
|
||||||
|
* After Reset the Cortex-M4 processor is in Thread mode,
|
||||||
|
* priority is Privileged, and the Stack is set to Main.
|
||||||
|
******************************************************************************
|
||||||
|
* @attention
|
||||||
|
*
|
||||||
|
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||||
|
* All rights reserved.</center></h2>
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
.syntax unified
|
||||||
|
.cpu cortex-m4
|
||||||
|
.fpu softvfp
|
||||||
|
.thumb
|
||||||
|
|
||||||
|
.global g_pfnVectors
|
||||||
|
.global Default_Handler
|
||||||
|
|
||||||
|
/* start address for the initialization values of the .data section.
|
||||||
|
defined in linker script */
|
||||||
|
.word _sidata
|
||||||
|
/* start address for the .data section. defined in linker script */
|
||||||
|
.word _sdata
|
||||||
|
/* end address for the .data section. defined in linker script */
|
||||||
|
.word _edata
|
||||||
|
/* start address for the .bss section. defined in linker script */
|
||||||
|
.word _sbss
|
||||||
|
/* end address for the .bss section. defined in linker script */
|
||||||
|
.word _ebss
|
||||||
|
/* start address for the .MB_MEM2 section. defined in linker script */
|
||||||
|
.word _sMB_MEM2
|
||||||
|
/* end address for the .MB_MEM2 section. defined in linker script */
|
||||||
|
.word _eMB_MEM2
|
||||||
|
|
||||||
|
/* INIT_BSS macro is used to fill the specified region [start : end] with zeros */
|
||||||
|
.macro INIT_BSS start, end
|
||||||
|
ldr r0, =\start
|
||||||
|
ldr r1, =\end
|
||||||
|
movs r3, #0
|
||||||
|
bl LoopFillZerobss
|
||||||
|
.endm
|
||||||
|
|
||||||
|
/* INIT_DATA macro is used to copy data in the region [start : end] starting from 'src' */
|
||||||
|
.macro INIT_DATA start, end, src
|
||||||
|
ldr r0, =\start
|
||||||
|
ldr r1, =\end
|
||||||
|
ldr r2, =\src
|
||||||
|
movs r3, #0
|
||||||
|
bl LoopCopyDataInit
|
||||||
|
.endm
|
||||||
|
|
||||||
|
.section .text.data_initializers
|
||||||
|
CopyDataInit:
|
||||||
|
ldr r4, [r2, r3]
|
||||||
|
str r4, [r0, r3]
|
||||||
|
adds r3, r3, #4
|
||||||
|
|
||||||
|
LoopCopyDataInit:
|
||||||
|
adds r4, r0, r3
|
||||||
|
cmp r4, r1
|
||||||
|
bcc CopyDataInit
|
||||||
|
bx lr
|
||||||
|
|
||||||
|
FillZerobss:
|
||||||
|
str r3, [r0]
|
||||||
|
adds r0, r0, #4
|
||||||
|
|
||||||
|
LoopFillZerobss:
|
||||||
|
cmp r0, r1
|
||||||
|
bcc FillZerobss
|
||||||
|
bx lr
|
||||||
|
|
||||||
|
.section .text.Reset_Handler
|
||||||
|
.weak Reset_Handler
|
||||||
|
.type Reset_Handler, %function
|
||||||
|
Reset_Handler:
|
||||||
|
ldr r0, =_estack
|
||||||
|
mov sp, r0 /* set stack pointer */
|
||||||
|
/* Call the clock system intitialization function.*/
|
||||||
|
bl SystemInit
|
||||||
|
|
||||||
|
/* Copy the data segment initializers from flash to SRAM */
|
||||||
|
INIT_DATA _sdata, _edata, _sidata
|
||||||
|
|
||||||
|
/* Zero fill the bss segments. */
|
||||||
|
INIT_BSS _sbss, _ebss
|
||||||
|
INIT_BSS _sMB_MEM2, _eMB_MEM2
|
||||||
|
|
||||||
|
/* Call static constructors */
|
||||||
|
bl __libc_init_array
|
||||||
|
/* Call the application s entry point.*/
|
||||||
|
bl main
|
||||||
|
|
||||||
|
LoopForever:
|
||||||
|
b LoopForever
|
||||||
|
|
||||||
|
.size Reset_Handler, .-Reset_Handler
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief This is the code that gets called when the processor receives an
|
||||||
|
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||||
|
* the system state for examination by a debugger.
|
||||||
|
*
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
.section .text.Default_Handler,"ax",%progbits
|
||||||
|
Default_Handler:
|
||||||
|
Infinite_Loop:
|
||||||
|
b Infinite_Loop
|
||||||
|
.size Default_Handler, .-Default_Handler
|
||||||
|
/******************************************************************************
|
||||||
|
*
|
||||||
|
* The minimal vector table for a Cortex-M4. Note that the proper constructs
|
||||||
|
* must be placed on this to ensure that it ends up at physical address
|
||||||
|
* 0x0000.0000.
|
||||||
|
*
|
||||||
|
******************************************************************************/
|
||||||
|
.section .isr_vector,"a",%progbits
|
||||||
|
.type g_pfnVectors, %object
|
||||||
|
.size g_pfnVectors, .-g_pfnVectors
|
||||||
|
|
||||||
|
|
||||||
|
g_pfnVectors:
|
||||||
|
.word _estack
|
||||||
|
.word Reset_Handler
|
||||||
|
.word NMI_Handler
|
||||||
|
.word HardFault_Handler
|
||||||
|
.word MemManage_Handler
|
||||||
|
.word BusFault_Handler
|
||||||
|
.word UsageFault_Handler
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word 0
|
||||||
|
.word SVC_Handler
|
||||||
|
.word DebugMon_Handler
|
||||||
|
.word 0
|
||||||
|
.word PendSV_Handler
|
||||||
|
.word SysTick_Handler
|
||||||
|
.word WWDG_IRQHandler
|
||||||
|
.word PVD_PVM_IRQHandler
|
||||||
|
.word TAMP_STAMP_LSECSS_IRQHandler
|
||||||
|
.word RTC_WKUP_IRQHandler
|
||||||
|
.word FLASH_IRQHandler
|
||||||
|
.word RCC_IRQHandler
|
||||||
|
.word EXTI0_IRQHandler
|
||||||
|
.word EXTI1_IRQHandler
|
||||||
|
.word EXTI2_IRQHandler
|
||||||
|
.word EXTI3_IRQHandler
|
||||||
|
.word EXTI4_IRQHandler
|
||||||
|
.word DMA1_Channel1_IRQHandler
|
||||||
|
.word DMA1_Channel2_IRQHandler
|
||||||
|
.word DMA1_Channel3_IRQHandler
|
||||||
|
.word DMA1_Channel4_IRQHandler
|
||||||
|
.word DMA1_Channel5_IRQHandler
|
||||||
|
.word DMA1_Channel6_IRQHandler
|
||||||
|
.word DMA1_Channel7_IRQHandler
|
||||||
|
.word ADC1_IRQHandler
|
||||||
|
.word USB_HP_IRQHandler
|
||||||
|
.word USB_LP_IRQHandler
|
||||||
|
.word C2SEV_PWR_C2H_IRQHandler
|
||||||
|
.word COMP_IRQHandler
|
||||||
|
.word EXTI9_5_IRQHandler
|
||||||
|
.word TIM1_BRK_IRQHandler
|
||||||
|
.word TIM1_UP_TIM16_IRQHandler
|
||||||
|
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||||
|
.word TIM1_CC_IRQHandler
|
||||||
|
.word TIM2_IRQHandler
|
||||||
|
.word PKA_IRQHandler
|
||||||
|
.word I2C1_EV_IRQHandler
|
||||||
|
.word I2C1_ER_IRQHandler
|
||||||
|
.word I2C3_EV_IRQHandler
|
||||||
|
.word I2C3_ER_IRQHandler
|
||||||
|
.word SPI1_IRQHandler
|
||||||
|
.word SPI2_IRQHandler
|
||||||
|
.word USART1_IRQHandler
|
||||||
|
.word LPUART1_IRQHandler
|
||||||
|
.word SAI1_IRQHandler
|
||||||
|
.word TSC_IRQHandler
|
||||||
|
.word EXTI15_10_IRQHandler
|
||||||
|
.word RTC_Alarm_IRQHandler
|
||||||
|
.word CRS_IRQHandler
|
||||||
|
.word PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler
|
||||||
|
.word IPCC_C1_RX_IRQHandler
|
||||||
|
.word IPCC_C1_TX_IRQHandler
|
||||||
|
.word HSEM_IRQHandler
|
||||||
|
.word LPTIM1_IRQHandler
|
||||||
|
.word LPTIM2_IRQHandler
|
||||||
|
.word LCD_IRQHandler
|
||||||
|
.word QUADSPI_IRQHandler
|
||||||
|
.word AES1_IRQHandler
|
||||||
|
.word AES2_IRQHandler
|
||||||
|
.word RNG_IRQHandler
|
||||||
|
.word FPU_IRQHandler
|
||||||
|
.word DMA2_Channel1_IRQHandler
|
||||||
|
.word DMA2_Channel2_IRQHandler
|
||||||
|
.word DMA2_Channel3_IRQHandler
|
||||||
|
.word DMA2_Channel4_IRQHandler
|
||||||
|
.word DMA2_Channel5_IRQHandler
|
||||||
|
.word DMA2_Channel6_IRQHandler
|
||||||
|
.word DMA2_Channel7_IRQHandler
|
||||||
|
.word DMAMUX1_OVR_IRQHandler
|
||||||
|
|
||||||
|
/*******************************************************************************
|
||||||
|
*
|
||||||
|
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||||
|
* As they are weak aliases, any function with the same name will override
|
||||||
|
* this definition.
|
||||||
|
*
|
||||||
|
*******************************************************************************/
|
||||||
|
.weak NMI_Handler
|
||||||
|
.thumb_set NMI_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak HardFault_Handler
|
||||||
|
.thumb_set HardFault_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak MemManage_Handler
|
||||||
|
.thumb_set MemManage_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak BusFault_Handler
|
||||||
|
.thumb_set BusFault_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak UsageFault_Handler
|
||||||
|
.thumb_set UsageFault_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak SVC_Handler
|
||||||
|
.thumb_set SVC_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak DebugMon_Handler
|
||||||
|
.thumb_set DebugMon_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak PendSV_Handler
|
||||||
|
.thumb_set PendSV_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak SysTick_Handler
|
||||||
|
.thumb_set SysTick_Handler,Default_Handler
|
||||||
|
|
||||||
|
.weak WWDG_IRQHandler
|
||||||
|
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak PVD_PVM_IRQHandler
|
||||||
|
.thumb_set PVD_PVM_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TAMP_STAMP_LSECSS_IRQHandler
|
||||||
|
.thumb_set TAMP_STAMP_LSECSS_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RTC_WKUP_IRQHandler
|
||||||
|
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak FLASH_IRQHandler
|
||||||
|
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RCC_IRQHandler
|
||||||
|
.thumb_set RCC_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI0_IRQHandler
|
||||||
|
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI1_IRQHandler
|
||||||
|
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI2_IRQHandler
|
||||||
|
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI3_IRQHandler
|
||||||
|
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI4_IRQHandler
|
||||||
|
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel1_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel2_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel3_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel4_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel5_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel6_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA1_Channel7_IRQHandler
|
||||||
|
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak ADC1_IRQHandler
|
||||||
|
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USB_HP_IRQHandler
|
||||||
|
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USB_LP_IRQHandler
|
||||||
|
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak C2SEV_PWR_C2H_IRQHandler
|
||||||
|
.thumb_set C2SEV_PWR_C2H_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak COMP_IRQHandler
|
||||||
|
.thumb_set COMP_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI9_5_IRQHandler
|
||||||
|
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_BRK_IRQHandler
|
||||||
|
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_UP_TIM16_IRQHandler
|
||||||
|
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||||
|
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM1_CC_IRQHandler
|
||||||
|
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TIM2_IRQHandler
|
||||||
|
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak PKA_IRQHandler
|
||||||
|
.thumb_set PKA_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C1_EV_IRQHandler
|
||||||
|
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C1_ER_IRQHandler
|
||||||
|
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C3_EV_IRQHandler
|
||||||
|
.thumb_set I2C3_EV_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak I2C3_ER_IRQHandler
|
||||||
|
.thumb_set I2C3_ER_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak SPI1_IRQHandler
|
||||||
|
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak SPI2_IRQHandler
|
||||||
|
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak USART1_IRQHandler
|
||||||
|
.thumb_set USART1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak LPUART1_IRQHandler
|
||||||
|
.thumb_set LPUART1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak SAI1_IRQHandler
|
||||||
|
.thumb_set SAI1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak TSC_IRQHandler
|
||||||
|
.thumb_set TSC_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak EXTI15_10_IRQHandler
|
||||||
|
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RTC_Alarm_IRQHandler
|
||||||
|
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak CRS_IRQHandler
|
||||||
|
.thumb_set CRS_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler
|
||||||
|
.thumb_set PWR_SOTF_BLEACT_802ACT_RFPHASE_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak IPCC_C1_RX_IRQHandler
|
||||||
|
.thumb_set IPCC_C1_RX_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak IPCC_C1_TX_IRQHandler
|
||||||
|
.thumb_set IPCC_C1_TX_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak HSEM_IRQHandler
|
||||||
|
.thumb_set HSEM_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak LPTIM1_IRQHandler
|
||||||
|
.thumb_set LPTIM1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak LPTIM2_IRQHandler
|
||||||
|
.thumb_set LPTIM2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak LCD_IRQHandler
|
||||||
|
.thumb_set LCD_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak QUADSPI_IRQHandler
|
||||||
|
.thumb_set QUADSPI_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak AES1_IRQHandler
|
||||||
|
.thumb_set AES1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak AES2_IRQHandler
|
||||||
|
.thumb_set AES2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak RNG_IRQHandler
|
||||||
|
.thumb_set RNG_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak FPU_IRQHandler
|
||||||
|
.thumb_set FPU_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel1_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel2_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel3_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel4_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel5_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel6_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel6_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMA2_Channel7_IRQHandler
|
||||||
|
.thumb_set DMA2_Channel7_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
.weak DMAMUX1_OVR_IRQHandler
|
||||||
|
.thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler
|
||||||
|
|
||||||
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
187
firmware/targets/f3/stm32wb55xx_flash_cm4.ld
Normal file
187
firmware/targets/f3/stm32wb55xx_flash_cm4.ld
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/**
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** File : stm32wb55xx_flash_cm4.ld
|
||||||
|
**
|
||||||
|
** Abstract : System Workbench Minimal System calls file
|
||||||
|
**
|
||||||
|
** For more information about which c-functions
|
||||||
|
** need which of these lowlevel functions
|
||||||
|
** please consult the Newlib libc-manual
|
||||||
|
**
|
||||||
|
** Environment : System Workbench for MCU
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed “as is,” without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20030000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
FLASH (rx) : ORIGIN = 0x08008000, LENGTH = 480K
|
||||||
|
RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFFC
|
||||||
|
RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM1 AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM1
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED
|
||||||
|
MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED
|
||||||
|
MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED
|
||||||
|
}
|
||||||
|
|
||||||
|
|
187
firmware/targets/f3/stm32wb55xx_flash_cm4_no_boot.ld
Normal file
187
firmware/targets/f3/stm32wb55xx_flash_cm4_no_boot.ld
Normal file
@ -0,0 +1,187 @@
|
|||||||
|
/**
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** File : stm32wb55xx_flash_cm4.ld
|
||||||
|
**
|
||||||
|
** Abstract : System Workbench Minimal System calls file
|
||||||
|
**
|
||||||
|
** For more information about which c-functions
|
||||||
|
** need which of these lowlevel functions
|
||||||
|
** please consult the Newlib libc-manual
|
||||||
|
**
|
||||||
|
** Environment : System Workbench for MCU
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed “as is,” without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2019 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20030000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||||
|
RAM1 (xrw) : ORIGIN = 0x20000004, LENGTH = 0x2FFFC
|
||||||
|
RAM_SHARED (xrw) : ORIGIN = 0x20030000, LENGTH = 10K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM1 AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM1
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED
|
||||||
|
MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED
|
||||||
|
MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED
|
||||||
|
}
|
||||||
|
|
||||||
|
|
103
firmware/targets/f3/target.mk
Normal file
103
firmware/targets/f3/target.mk
Normal file
@ -0,0 +1,103 @@
|
|||||||
|
TOOLCHAIN = arm
|
||||||
|
|
||||||
|
DEBUG_AGENT = openocd -f interface/stlink-v2.cfg -c "transport select hla_swd" -f ../debug/stm32wbx.cfg -c "init" -c "reset halt"
|
||||||
|
|
||||||
|
BOOT_ADDRESS = 0x08000000
|
||||||
|
FW_ADDRESS = 0x08008000
|
||||||
|
OS_OFFSET = 0x00008000
|
||||||
|
FLASH_ADDRESS = 0x08008000
|
||||||
|
|
||||||
|
NO_BOOTLOADER ?= 0
|
||||||
|
ifeq ($(NO_BOOTLOADER), 1)
|
||||||
|
BOOT_ADDRESS = 0x08000000
|
||||||
|
FW_ADDRESS = 0x08000000
|
||||||
|
OS_OFFSET = 0x00000000
|
||||||
|
FLASH_ADDRESS = 0x08000000
|
||||||
|
CFLAGS += -DNO_BOOTLOADER
|
||||||
|
endif
|
||||||
|
|
||||||
|
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
|
||||||
|
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||||
|
|
||||||
|
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32WB55xx -Wall -fdata-sections -ffunction-sections
|
||||||
|
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs
|
||||||
|
|
||||||
|
CUBE_DIR = ../lib/STM32CubeWB
|
||||||
|
C_SOURCES += \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usb.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_adc_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_i2c_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_spi_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
|
||||||
|
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/croutine.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/list.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/MemMang/heap_4.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c \
|
||||||
|
$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c \
|
||||||
|
$(wildcard $(TARGET_DIR)/Src/*.c) \
|
||||||
|
$(wildcard $(TARGET_DIR)/Src/fatfs/*.c) \
|
||||||
|
$(wildcard $(TARGET_DIR)/api-hal/*.c)
|
||||||
|
|
||||||
|
ASM_SOURCES += $(TARGET_DIR)/startup_stm32wb55xx_cm4.s
|
||||||
|
|
||||||
|
# Common
|
||||||
|
CFLAGS += \
|
||||||
|
-DUSE_HAL_DRIVER \
|
||||||
|
-DHAVE_FREERTOS \
|
||||||
|
-DBUTON_INVERT=true \
|
||||||
|
-DDEBUG_UART=huart1
|
||||||
|
|
||||||
|
ifeq ($(NO_BOOTLOADER), 1)
|
||||||
|
LDFLAGS += -T$(TARGET_DIR)/stm32wb55xx_flash_cm4_no_boot.ld
|
||||||
|
else
|
||||||
|
LDFLAGS += -T$(TARGET_DIR)/stm32wb55xx_flash_cm4.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
CFLAGS += \
|
||||||
|
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc \
|
||||||
|
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
|
||||||
|
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/include \
|
||||||
|
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
|
||||||
|
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F \
|
||||||
|
-I$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Core/Inc \
|
||||||
|
-I$(CUBE_DIR)/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc \
|
||||||
|
-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
|
||||||
|
-I$(CUBE_DIR)/Drivers/CMSIS/Include \
|
||||||
|
-I$(TARGET_DIR)/Inc \
|
||||||
|
-I$(TARGET_DIR)/Src/fatfs \
|
||||||
|
-I$(TARGET_DIR)/api-hal
|
||||||
|
|
1
lib/STM32CubeWB
Submodule
1
lib/STM32CubeWB
Submodule
@ -0,0 +1 @@
|
|||||||
|
Subproject commit e3d0473c1588f1379ff0e4d7d1c78d081c352518
|
Loading…
Reference in New Issue
Block a user