* NFC CLI: Fix multiple apdu commands from not working when one of them gives an empty response
* Make PVS happy
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Fix key invalidation (again~)
* NFC: shouldn't be there
This code get called each time we check for B key
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Improved MFC emulation on some readers
* NFC: Improved emulation on some readers (part 2): Some Android devices don't like this
* NFC: Improved emulation on some readers (part 3): I knew that during the emulation timings are critical, but one log breaks all...
* NFC: Improved emulation on some readers (part 4): Add fixes to Detect reader and refactor code
* NFC: Improved emulation on some readers (part 5)
* NFC: Improved emulation on some readers (part 6): GUI doesn't update without delay
* NFC: Improved emulation on some readers (part 7): Reworked emulation flow, some bug fixes and improvements
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* improve digital_signal for longer packets, also clean up code
* added SLIX2 specific features like signature and unknown keys (for issue #2781), added WRITE_PASSWORD handling
* fix NfcV AFI selection
* when NFCV_CMD_READ_MULTI_BLOCK reads beyond memory end, return the maximum possible block's content
* added SLIX2 reading
* fix NXP SYSTEMINFO response check size
* capture the first received password if none was set before
* clear stored data before reading SLIX details renamed slix2_dump functions to slix2_read
* display card block size values as decimal
Co-authored-by: あく <alleteam@gmail.com>
* I was outplayed by the C programming language
* Fix emulating empty keys as 0s
* Add exceptions for Detect Reader
* Sync api_symbols.csv for F18
* Outplayed by the C language [X2]
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* added support for ISO15693 (NfcV) emulation, added support for reading SLIX tags
* SLIX: fixed crash situation when an invalid password was requested
* ISO15693: show emulate menu when opening file
* rename NfcV emulate scene to match other NfcV names
* optimize allocation size for signals
* ISO15693: further optimizations of allocation and free code
* ISO15693: reduce latency on state machine reset
* respond with block security status when option flag is set
* increased maximum memory size to match standard
added security status handling/load/save
added SELECT/QUIET handling
more fine grained allocation routines and checks
fix memset sizes
* added "Listen NfcV Reader" to sniff traffic from reader to card
* added correct description to delete menu
* also added DSFID/AFI handling and locking
* increase sniff log size
* scale NfcV frequency a bit, add echo mode, fix signal level at the end
* use symbolic modulated/unmodulated GPIO levels
* honor AFI field, decrease verbosity and removed debug code
* refactor defines for less namespace pollution by using NFCV_ prefixes
* correct an oversight that original cards return an generic error when addressing outside block range
* use inverse modulation, increasing readable range significantly
* rework and better document nfc chip initialization
* nfcv code review fixes
* Disable accidentally left on signal debug gpio output
* Improve NFCV Read/Info GUIs. Authored by @xMasterX, committed by @nvx
* Fix crash that occurs when you exit from NFCV emulation and start it again. Authored by @xMasterX, committed by @nvx
* Remove delay from emulation loop. This improves compatibility when the reader is Android.
* Lib: digital signal debug output pin info
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: MX <10697207+xMasterX@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: add bus abstraction and port some subsystem to it
* Make PVS happy, cleanup code
* Update API symbols for f18
* F18: backport bus changes from f7
* Revert to STOP2 sleep mode
* Fix downgrading the firmware via updater
* Port iButton TIM1 to furi_hal_bus
* Port Infrared TIM1 and TIM2 to furi_hal_bus
* Just enable the timer bus
* Port furi_hal_pwm to bus API
* Fix include statement
* Port furi_hal_rfid to bus API
* Port furi_hal_subghz and others to bus API
* Remove unneeded include
* Improve furi_hal_infrared defines
* Reset LPTIM1 via furi_hal_bus API
* Crash when trying to enable an already enabled peripheral
* Better defines
* Improved checks
* Lots of macro wrappers
* Copy spi changes for f18
* Fix crashes in LFRFID system
* Fix crashes in NFC system
* Improve comments
* Create FuriHalBus.md
* Update FuriHalBus.md
* Fix crash when launching updater
* Documentation: couple small fixes in FuriHalBus
* FuriHal: fix copypaste in furi_hal_rfid_tim_reset
* FuriHal: reset radio core related peripherals on restart
* FuriHalBus: is enabled routine and bug fix for uart
* RFID HAL: accomodate furi hal bus
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Implement support for reading Opal card (Sydney, Australia)
* stub_parser_verify_read: used UNUSED macro
* furi_hal_rtc: expose calendaring as functions
* opal: use bit-packed struct to parse, rather than manually shifting about
* Update f18 api symbols
Co-authored-by: あく <alleteam@gmail.com>
* nfc: Add Mifare Ultralight C detection
* nfc: Add display name for MFUL C and hide menu items
MFUL C unlock and emulation currently not supported, so hide from menu
if current card is MFUL C
* nfc: Also check response when probing 3DES auth
* nfc: Hide emulate option in saved menu for MFUL if not supported
* nfc: Remove unlock options from saved menu if Ultralight C
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
