* Add Mastercode SubGHz Protocol
* Add 2 valid raw files and cleanup code
* Add tests to the two Raw Files
* Remove extra test & delete comments
* Fixes pulse length and shows correct Key
Co-authored-by: FlipperZelebro <flipperzelebro [at] gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Furi: remove direct FreeRTOS timers use
* Furi: eliminate FreeRTOS headers leak. What did it cost? Everything...
* SubGhz: proper public api for protocols. Format Sources.
* Furi: slightly less redundant declarations
* Desktop: proper types in printf
* Sync API Symbols
* Furi: add timer reset and fix dolphin service, fix unit tests
* Furi: proper timer restart method naming and correct behavior in timer stopped state.
---------
Co-authored-by: hedger <hedger@nanode.su>
"A long time ago in a galaxy far, far away...." we started NFC subsystem refactoring.
Starring:
- @gornekich - NFC refactoring project lead, architect, senior developer
- @gsurkov - architect, senior developer
- @RebornedBrain - senior developer
Supporting roles:
- @skotopes, @DrZlo13, @hedger - general architecture advisors, code review
- @Astrrra, @doomwastaken, @Hellitron, @ImagineVagon333 - quality assurance
Special thanks:
@bettse, @pcunning, @nxv, @noproto, @AloneLiberty and everyone else who has been helping us all this time and contributing valuable knowledges, ideas and source code.
* Storage: count opened files
* Storage: sd mount
* Storage: prompt to mount SD card if not mounted
* F18: update API
* F18: update API version
* Fix logger naming scheme
* Storage: storage_files_count -> storage_open_files_count
Co-authored-by: あく <alleteam@gmail.com>
* added filename mode setting
* added furi_flag checks for when filename_mode is set
* changed naming for ibutton, lfrfid and subghz
* requested changes from PR
* Lib: gather all naming bits and pieces under name generator module. Properly bump api version. FuriHal: fix RTC flag enum.
* PR requested changes
* bug fix for arg type
* added functionality for other application scenes
* Lib: cleanup name generator API, simplify usage. Sync API symbols.
* Lib: proper size type in name_generator. Cleanup.
* FuriHal: cleanup rtc api usage across firmware
Co-authored-by: あく <alleteam@gmail.com>
* Allow loading user supplied keys and add CTR mode
* Add GCM mode to furi_hal_crypto
* Split up CTR and GCM code, add flag for adv crypto
* Add convenience functions for GCM crypto
* Run fbt format
* Update GCM to support additional auth data
* Update APIs
* FuriHal: update crypto documentation, method names and usage
* Clean up code for key (un)loading, GCM and CTR
- get rid of goto
- do not use furi_hal_bt_is_alive() when not using secure enclave
- give defines a type and wrap in ()
* Add unit test for CTR and GCM crypto
* FuriHal: const in crypto unit tests, cortex timer for crypto operations timeouts
* FuriHal: update crypto docs
Co-authored-by: twisted_pear <twstd@posteo.net>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add SubGhzThresholdRssi
* SubGhz: remove direct reading of subghz-txrx-txrx_state
* SubGhz: remove direct reading subghz->txrx->hopper_state
* SubGhz: remove direct reading subghz->lock
* SubGhz: check load type file
* SubGhz: remove direct reading subghz->txrx->rx_key_state
* SubGhz: remove direct reading subghz->txrx->speaker_state
* SubGhz: refactoring subghz_scene_set_type.c
* SubGhz: moving "txrx" entity to a separate file
* SubGhz: show error tx start
* SubGhz: refactoring RPC
* SubGhz: value get optimizations
* SubGhz: fix name file
* SubGhz: add function description
* SubGhz: fix double back with a blocked transmission in this region and speacker, when a transmission is blocked in this region
* SubGhz: correct spelling
* SubGhz: better naming
* SubGhz: simplify includes
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: fix RAW "Send never ends"
* SubGhz: delete comments
* SubGhz: RAW file parsing speed increase
* SubGhz: fix level_duration_is_wait
* SubGhz: modification furi_hal_subghz_async_tx_refill
* SubGhz: furi_hal_subghz_stop_async_rx
* SubGhz: hal unit test and better async tx yield handling
* FuriHal: proper async tx end in subghz, vibro on power off
* FuriHal: variable naming in subghz
* SubGhz,FuriHal: extreme timings in subghz hal unit tests, remove memset in async tx buffer fill routine
* FuriHal: small refinements in subghz
Co-authored-by: あく <alleteam@gmail.com>
* Core: thread alloc+set shortcut
* Apps: use thread allocation shortcut
* Mark some service threads as services
* Init BT as soon as possible
Co-authored-by: あく <alleteam@gmail.com>
* Init copy of oregon2 to weather station app
* WS decoder
* Reuse decoded data
* Delete old protocol
* Delete oregon2 unit test
* Decrement count of random test
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* WS: add protocol Acurite-606TX
* WS: history, added display of the channel (if any) in the general list
* WS: added display of the button state if it is on the transmitter, and displaying the data that is in the signal
* WS: fix batt info
* WS: add protocol LaCrosse_TX141THBv2
* WS; fix syntax
* Furi: bump api_symbols version
Co-authored-by: あく <alleteam@gmail.com>
