* Separate expansion control and worker threads
* Add edge case checks
* Reduce expansion control thread stack size, add comments
* Fix crash when disabling expansion modules
* Show a different RPC icon for expansion modules
* Restore expansion interrupt on changing logging settings
* Improve responsiveness in heavy games at the expense of dropped frames
* Improve furi_hal_serial API
* Fix a typo
* Remove too optimistic furi_check, replace with condition
* Fix premature RX interrupt during serial configuration
* Disable expansion interrupt if the handle was acquired
* Do not use a timer callback
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Fix crash caused by garbage input
* Add unit tests for garbage input
* Enable applications to disable and then restore expansion module support
* GPIO App: disable expansion on app start and re-enable on exit
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
there is no expansion modules yet, so we can disable uart listen for them being enabled 24/7
p.s. some parts of code was taken from Willy-JL's solution
todo: revert force reset part if there are real use cases for expansion protocol appears
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* Implement basic external module detection and echo
* Update api symbols for f18
* Minimally working implementation (can create directory via rpc)
* Make expansion protocol parser a header-only library
* Rename a function
* Improve thread syncronisation
* Implement multi-packet transmissions
* Improve test application
* Clean up expansion worker code
* Send heartbeat when host is ready
* Update API symbols
* Add draft documentation
* Expansion worker: proper timeout and error handling
* Expansion worker: correct TX, do not disable expansion callback
* Expansion protocol: pc side test script
* PC side expansion test: trying to change baudrate
* Working comms between 2 flippers
* Cleaner exit from expansion worker thread
* Better checks
* Add debug logs
* Remove unneeded delays
* Use USART as default expansion port
* Refactor furi_hal_serial_control, fix crash
* Improve furi_hal abstraction, wait for stable rx pin
* Remove rogue include
* Set proper exit reason on RPC error
* Remove rogue comment
* Remove RX stability check as potentially problematic
* Improve expansion_test application
* Remove rogue define
* Give up on TODO
* Implement expansion protocol checksum support
* Update ExpansionModules.md
* RPC: reverse input
* Assets: sync protobuf
* Fix typos
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* Make expansion_test compile
* Remove unneeded file
* Make PVS-studio happy
* Optimise stack usage
* Optimise heap usage, improve api signature
* Fix typo
* Clean up code
* Update expansion_protocol.h
* Fix unit tests
* Add doxygen comments to expansion.h
* Update/add doxygen comments
* Update ExpansionModules.md
* Github: new global code owner
* FuriHal: naming in serial control
* Expansion: check mutex acquire return result
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: UART refactoring
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* FuriHalSerial: various improvements and PR review fixes
* FuriHal: proper ISR function signatures
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* Implement basic external module detection and echo
* Update api symbols for f18
* Minimally working implementation (can create directory via rpc)
* Make expansion protocol parser a header-only library
* Rename a function
* Improve thread syncronisation
* Implement multi-packet transmissions
* Improve test application
* Clean up expansion worker code
* Send heartbeat when host is ready
* Update API symbols
* Add draft documentation
* Expansion worker: proper timeout and error handling
* Expansion worker: correct TX, do not disable expansion callback
* Expansion protocol: pc side test script
* PC side expansion test: trying to change baudrate
* Working comms between 2 flippers
* Cleaner exit from expansion worker thread
* Better checks
* Add debug logs
* Remove unneeded delays
* Use USART as default expansion port
* Refactor furi_hal_serial_control, fix crash
* Improve furi_hal abstraction, wait for stable rx pin
* Remove rogue include
* Set proper exit reason on RPC error
* Remove rogue comment
* Remove RX stability check as potentially problematic
* Improve expansion_test application
* Remove rogue define
* Give up on TODO
* Implement expansion protocol checksum support
* Update ExpansionModules.md
* RPC: reverse input
* Assets: sync protobuf
* Fix typos
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* Make expansion_test compile
* Remove unneeded file
* Make PVS-studio happy
* Optimise stack usage
* Optimise heap usage, improve api signature
* Fix typo
* Clean up code
* Update expansion_protocol.h
* Fix unit tests
* Add doxygen comments to expansion.h
* Update/add doxygen comments
* Update ExpansionModules.md
* Github: new global code owner
* FuriHal: naming in serial control
* Expansion: check mutex acquire return result
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* FuriHal: UART refactoring
* ApiSymbols: add furi_record_destroy
* FuriHal: cleanup serial API, add logging configuration in RTC
* FuriHal: hide private part in _i header. Toolbox: cleanup value index. SystemSettings: logging device and baudrate.
* FuriHal: RTC logging method documentation
* Synchronize API Symbols
* Furi: mark HEAP_PRINT_DEBUG as broken
* FuriHal: furi_hal_serial, add custom IRQ func
* Fix PR review issues
* FuriHal: UART add reception DMA (#3220)
* FuriHal: add DMA serial rx mode
* usb_uart_bridge: switch to working with DMA
* Sync api symbol versions
* FuriHal: update serial docs and api
* FuriHal: Selial added similar API for simple reception mode as with DMA
* FuriHal: Update API target H18
* API: ver API H7
* FuriHal: Serial error processing
* FuriHal: fix furi_hal_serial set baudrate
* Sync api symbols
* FuriHal: cleanup serial isr and various flag handling procedures
* FuriHal: cleanup and simplify serial API
* Debug: update UART Echo serial related flags
* FuriHal: update serial API symbols naming
* FuriHalSerial: various improvements and PR review fixes
* FuriHal: proper ISR function signatures
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SkorP <skorpionm@yandex.ru>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
* Added new image DolphinSaved_113x58.png for all "saved" pages
* New image DolphinDone_80x58.png added
* Replaced dolphins on all scenes accroding to new UI specs
* New success dolphin image added
* Success scene image replaced
* Changed image and text for update initial scene
* Image and text adjusted for "Original restored" scene
* Removed old DolphinNice_96x59.png image
* New image for LFRFID scene
* Removed unused image
* New UI image added to assets
* Replaced warning dolphin on mf_classic write initial fail scene
* Removed old image
* Changed image on scenes to a new one
* New dolphin mafia image
* Replaced dolphin mafia image to a new one
* Removed DolphinMafia_115x62.png
* New check symbol on completed state for detect_reader
* Adjusted layout elements position
* Removed second switching to popup view in order to achieve control in support callbacks
In general now we show generic scene and after that in on_enter callback we can redefine it for particular protocol
* CardDetected event now also triggers on_event callback
* Now on AuthRequest we throw CardDetected custom event
* Added callback for read_on_event
* Now we show different screen while reading and unlocking
* Fixed missing asstes for some scenes
* Update DolphinMafia_119x62.png
* Adjusted all the scenes with DolphinMafia image
* Scenes with save image adjusted
* Removed unnecessary assets DolphinMafia_119x62.png and DolphinSaved_113x58.png
* All common dolphins moved to Dolphin folder
* Moved DolphinReadingSuccess_59x63.png to Dolphin folder
* Set proper led color for detect and read scenes
* Added new notification sequence for semi_success results
* Use new sequence for semi_success nfc reads
* Different events are now throwed depending on read result
* Added handling of incomplete event for ultralight cards
* Replaced image for iButton scene
* Updated API for f18
* Fixed issue with unlock retry sequence
* Fix after review
* Success notification replaced to semi success in case of incomplete mf classic reading
* New text for read scene
* New read result sound notification logic for mf classic cards
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
