* added DigitalSequence to chain multiple DigitalSignals
added PulseReader for hardware assisted digital signal sampling
* added send_time option to start a signal at a specific DWT->CYCCNT value
* fixed linter errors and undone function renaming
* fixed renaming
* flagged functions in api_symbols.csv
* allow gpio field to stay uninitialized in digital_signal_prepare_arr()
* fix test cases to match (expected) implementation
* pulse_reader: build as static library
Signed-off-by: g3gg0.de <git@g3gg0.de>
* fix starting level detection in pulse_reader
* added unit test for pulse_reader
* change pulse reader test timings to 1, 10 and 100 ms
* fine tuned timings for pulse_reader test
* pulse_reader_stop now deinits GPIO as recommended by @gornekich
* ran format_py
* pulse_reader: remove from API, allow to link with faps
Signed-off-by: g3gg0.de <git@g3gg0.de>
* remove unit test for pulse_reader again
* pulse_reader: add call to set GPIO pull direction
* make structures private, add C implementation of digital_signal_update_dma()
* digital_signal/pulse_reader: allow parameters for free to be NULL
* digital_signal: show unoptimized and optimized code for digital_signal_update_dma() next to each other
* pulse_reader: further optimize assembly code
* digital_signal: reduce code complexity of digital_signal_update_dma() by only reconfiguring DMA2
* digital_signal: remove assembly code, limiting the performance but increasing portability
* added recovery if the timer already expired
* digital_signal: fix memory leak
* digital_signal: keep lock until all DMA transfers have finished
* DigitalSequence: fix issues with concatenation of same levels and spurious bit flips
* DigitalSignal: use cyclic DMA buffer for sequences
* update api_symbols.csv
* Update api_symbols.csv for f18 target
* Patches from @gornekich to fix linter warnings.
* Remove some redundant if checks
* Remove some magic numbers and reformat.
* Remove forced terminating edge.
Signed-off-by: g3gg0.de <git@g3gg0.de>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add SubGhzThresholdRssi
* SubGhz: remove direct reading of subghz-txrx-txrx_state
* SubGhz: remove direct reading subghz->txrx->hopper_state
* SubGhz: remove direct reading subghz->lock
* SubGhz: check load type file
* SubGhz: remove direct reading subghz->txrx->rx_key_state
* SubGhz: remove direct reading subghz->txrx->speaker_state
* SubGhz: refactoring subghz_scene_set_type.c
* SubGhz: moving "txrx" entity to a separate file
* SubGhz: show error tx start
* SubGhz: refactoring RPC
* SubGhz: value get optimizations
* SubGhz: fix name file
* SubGhz: add function description
* SubGhz: fix double back with a blocked transmission in this region and speacker, when a transmission is blocked in this region
* SubGhz: correct spelling
* SubGhz: better naming
* SubGhz: simplify includes
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* cubewb: downgraded to v1.15.0
* hal: updated f18 symbols to match LL
* hal: flash: use furi_hal_cortex_timer for timeouts
* scripts: fixed cube version validation from config file
* hal: flash: added 3 seconds timeout when waiting for C2 to unlock flash controller. On timeout, triggers furi_check
* nfc: fixed missing interrupt setup on multiple platformSetIrqCallback() invocations
* hal: gpio: don't trigger furi_check on furi_hal_gpio_add_int_callback() with same parameters
* Reverted NFC fixes - will be in a separate PR
* scripts: storage: fixed exception handler for paths
* Furi: more gpio checks in HAL
* Nfc: do not spawn service thread if it is already spawned
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
* Separate ibutton to its own module, add one_wire to f18
* Move onewire cli to a separate app
* Add definitions for normal and overdrive timings
* Update api definitions
* Add rough overdrive timings definition for onewire emulation
* Remove one_wire_host_timing.h
* Add rough overdrive timings for onewire host
* Improve overdrive mode
* Working overdrive mode from flipper to flipper
* Update thermometer example app
* Turn on otg power when running thermometer example app
* Implement reset overdrive switching
* Always exit out of overdrive mode
* Improve overdrive timings
* Fix typos
* Fix reset behaviour
* Use overdrive mode everywhere in DS1996
* Improve comments
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* debug: automated support for multiple debug symbol files
* faploader: extra checks for app list state
* debug: trigger BP before fap's EP if under debugger
* faploader, debug: better naming
* docs: info on load breakpoint
* faploader: header cleanup
* faploader: naming fixes
* debug: less verbose; setting debug flag more often
* typo fix
* iButton: Add DS1971 Support refactored for v2
* Fix requested by gsurkov
* Fix DALLAS_COMMON_CMD_* use, cusotm data field to Eeprom and COPY_SCRAPTCHPAD
* Fix Emulation + Memory Info + Docs
* Fix docs, strings, refactor code
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: あく <alleteam@gmail.com>
* NFC: Support reading Mifare Classic key B from sector trailer and reusing it for other sectors
* NFC: Fix my pointer typo
* NFC: Fix reading sector with B key where A key can't read block (fixes#2413) and fix Nfc Magic app not using NFC folder by default (in file select)
* NFC: Fix strange bug
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* Temporary get Metakom and Cyfral keys out of the way
* Better enum name
* Syncing work, does not compile
* Syncing work, now compiles
* Working read impl for DS1990 and DS1992
* Add the ability to display extended key data
* Get rid of DialogEx
* Add save and load API
* Better iButtonKey encapsulation
* Fix crash
* Load key code boilerplate
* More load key code boilerplate
* Minor code cleanup
* Implement loading and saving DS1990 keys
* Implement the Info scene
* Implement loading & saving for DS1992
* Implement read error scene stub
* Implement delete confirmation screen
* Better error messages (protocol-dependent)
* Minor old code cleanup
* Remove iButtonDevice, add command callback to iButtonSlave
* Implement draft emulation for DS1990
* Better emulation for DS1990
* Initial emulation implementation for DS1992
* Better common command definitions
* Use common submenu callback, add protocol list
* Improve ViewData screen
* Improve scene_add_type
* Add stubs for write functionality
* Improve naming consistency
* Implement writing a DS1992 onto another one
* Improve DS1992 write code
* Improve DS1992 write code once more
* Prepare write_blank for DS1990, delete ibutton_writer
* Implement writing DS1990 onto blanks
* Fix reading DS1990
* Partially implement writing DS1992 onto blanks
* Implement GUI for writing keys
* Implement GUI for emulating keys
* Reduce memory usage for pretty_format
* Automatically truncate data more than 256 bytes
* Initial implementation of DS1996 (not tested)
* Fix crash due to missing virtual function
* Improve emulation code
* Improve DS1992 emulation code
* Correct return value for onewire_slave_send
* Correct return value for onewire_slave_receive
* Implement emulation for DS1992 & DS1996
* Better constant names
* Simplify & optimise the emulation code
* Remove duplicate code
* Add skip rom command emulation
* Show loading animation for large keys
* Implement manual adding & editing of keys
* Use buffered file streams to speed up saving & loading
* Reset key name before adding a new one
* Sync a buffered file stream before saving
* Use the DSGeneric protocol as a fallback option
* Implement emulation via RPC
* Refactor iButton code in preparation for comparator keys
* Refactor iButton code in preparation for comparator keys once more
* Make some functions static
* Make protocols not rely on one_wire classes
* Improve ProtocolDict usage
* Improve ProtocolDict usage more
* Implement reading Metakom & Cyfral keys
* Rename some files
* Better file structure
* Implement a unified interface for misc protocols
* Implement a unified interface for dallas protocols
* Concrete types for Dallas protocols
* Implement a unified interface for all key types
* Improved type naming
* Improved private types
* Proper types in protocol definitions
* Implement emulation for Cyfral & Metakom keys
* Implement save&load for Metakom & Cyfral keys
* Better type names
* Rename files, better names
* Allocate iButtonProtocols like a normal class
* Reset the key each time the start scene is selected
* Improve comments and constants
* Add ibutton_protocols to SDK headers
* Add ibutton_key to SDK headers
* Add ibutton_key to SDK headers
* Implement reading via cli
* Implement emulation via cli
* Implement writing Dallas blanks via cli
* Correctly revert the editing if cancelled by the user
* Correct committing mishap
* Elide the long text on the info screen
* Change key name for data in Misc keys
* Update iButtonFileFormat.md
* Remember the key's folder
* Save menu position in ReadKeyMenu and SavedKeyMenu
* Correct use of preselected path in file browser
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Threads: application id
* Unit tests: appsdata getter test
* Unit tests: moar test cases for appsdata getter
* Unit tests: remove folders after test
* Storage: dir_is_exist, migrate, + unit_tests
* Plugins: migration
* Storage: common_exists, moar unit_tests 4 "common_migrate", "common_migrate" and "common_merge" bugfixes
* Storage: use FuriString for path handling
* Storage API: send caller thread id with path
* Storage: remove StorageType field in storage file list
* Storage: simplify processing
* Storage API: send caller thread id with path everywhere
* Storage: /app alias, unit tests and path creation
* Storage, path helper: remove unused
* Examples: app data example
* App plugins: use new VFS path
* Storage: file_info_is_dir
* Services: handle alias if the service accepts a path.
* App plugins: fixes
* Make PVS happy
* Storage: fix storage_merge_recursive
* Storage: rename process_aliases to resolve_path. Rename APPS_DATA to APP_DATA.
* Apps: use predefined macro instead of raw paths. Example Apps Data: README fixes.
* Storage: rename storage_common_resolve_path to storage_common_resolve_path_and_ensure_app_directory
* Api: fix version
* Storage: rename alias message
* Storage: do not create app folders in path resolving process in certain cases.
---------
Co-authored-by: Astra <93453568+Astrrra@users.noreply.github.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal, Power, UnitTests: rename battery charge voltage limit API
* FuriHal: bump API, power info major versions
* Power: fix battery charge voltage limit for > 7.935v
Co-authored-by: あく <alleteam@gmail.com>
* Re-init NFC when starting the worker
* FuriHal: cleanup nfc init/deinit sequence
* FuriHal: a little bit more defensive nfc init
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add protocol DataRAW (binarization of data quantized by the minimum correlated duration)
* SubGhz: fix name history
* SubGhz: add encoder Data_RAW protocol
* SubGhz: decreasing the size of the LevelDuration structure
* SubGhz: history, added check that there is free RAM
* SubGhz: checking for free memory, support to pass without gap
* SubGhz: add running average to average the result, auto cut noise at the end of a burst
* SubGhz: support for repeating sequences
* SubGhz: fix secplus_v2 decoder
* SubGhz: bin_RAW fix add history
* SubGhz: add debug
* SubGhz: debug refactoring
* FURI_LOG: add FURI_LOG_RAW_x formatted string output like printf
* SubGhz: fix new FURI_LOG metod
* FURI_LOG: fix unit test
* SubGhz: add enable/disable BinRAW protocol decoding
* SubGhz: fix PVS
* SubGhz: forcibly turn off the speaker when exiting SubGhz
* SubGhz: adaptive adjustment to the noise level
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Fix recording RAW files, sometimes could not start at a high level
* SubGhz: subghz_worker, add short duration filter setting
* SubGhz: capture raw timings in cli. Furi: clear pending interrupts on ISR set/reset
* SubGhz: fix start duration in furi_hal_subghz_start_async_rx
* [FL-3093] SubGhz: hopping issue in some regions
* [FL-3087] SubGhz: fix delete-ok issue
* SubGhz: remove copypasta from rx_raw cli command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SCons: do not include backup files in build
* fbt: now GlobRecursive by default excludes backup files
* fbt: added backup file exclusion to plain libs
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: hedger <hedger@nanode.su>
Co-authored-by: あく <alleteam@gmail.com>
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* First part of multitarget porting
* Delete firmware/targets/f7/Inc directory
* Delete firmware/targets/f7/Src directory
* gpio: cli fixes; about: using version from HAL
* sdk: path fixes
* gui: include fixes
* applications: more include fixes
* gpio: ported to new apis
* hal: introduced furi_hal_target_hw.h; libs: added one_wire
* hal: f18 target
* github: also build f18 by default
* typo fix
* fbt: removed extra checks on app list
* api: explicitly bundling select mlib headers with sdk
* hal: f18: changed INPUT_DEBOUNCE_TICKS to match f7
* cleaned up commented out code
* docs: added info on hw targets
* docs: targets: formatting fixes
* f18: fixed link error
* f18: fixed API version to match f7
* docs: hardware: minor wording fixes
* faploader: added fw target check
* docs: typo fixes
* github: not building komi target by default
* fbt: support for `targets` field for built-in apps
* github: reworked build flow to exclude app_set; fbt: removed komi-specific appset; added additional target buildset check
* github: fixed build; nfc: fixed pvs warnings
* attempt to fix target id
* f7, f18: removed certain HAL function from public API
* apps: debug: enabled bt_debug_app for f18
* Targets: backport input pins configuration routine from F7 to F18
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
