unleashed-firmware/lib/one_wire/ibutton/ibutton_worker_modes.c
Georgii Surkov 7a3a1aaf0d
[FL-3057] Allow use of any suitable pin for 1-Wire devices (#2350)
* Add 1-wire thermometer example app stub
* Working 1-wire thermometer app
* Refactor app to use threads
* Clean up code, add comments
* Add CRC checking
* Increase update period
* Fix error in fbt
* Revert the old update period
* Use settable pin in onewire_host
* Use settable pin for onewire_slave
* Clear EXTI flag after callback, make private methods static in onewire_slave
* Do not hardcode GPIO pin number
* Remove iButton hal from furi_hal_rfid
* Remove most of furi_hal_ibutton
* Add some of furi_hal_ibutton back
* Slightly neater code
* Fix formatting
* Fix PVS-studio warnings
* Update CODEOWNERS
* Add furi_hal_gpio_get_ext_pin_number
* Create README.md
* FuriHal: move furi_hal_gpio_get_ext_pin_number to resources

---------

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2023-02-08 14:40:44 +09:00

350 lines
11 KiB
C

#include <furi.h>
#include <furi_hal.h>
#include "ibutton_worker_i.h"
#include "ibutton_key_command.h"
void ibutton_worker_mode_idle_start(iButtonWorker* worker);
void ibutton_worker_mode_idle_tick(iButtonWorker* worker);
void ibutton_worker_mode_idle_stop(iButtonWorker* worker);
void ibutton_worker_mode_emulate_start(iButtonWorker* worker);
void ibutton_worker_mode_emulate_tick(iButtonWorker* worker);
void ibutton_worker_mode_emulate_stop(iButtonWorker* worker);
void ibutton_worker_mode_read_start(iButtonWorker* worker);
void ibutton_worker_mode_read_tick(iButtonWorker* worker);
void ibutton_worker_mode_read_stop(iButtonWorker* worker);
void ibutton_worker_mode_write_start(iButtonWorker* worker);
void ibutton_worker_mode_write_tick(iButtonWorker* worker);
void ibutton_worker_mode_write_stop(iButtonWorker* worker);
const iButtonWorkerModeType ibutton_worker_modes[] = {
{
.quant = FuriWaitForever,
.start = ibutton_worker_mode_idle_start,
.tick = ibutton_worker_mode_idle_tick,
.stop = ibutton_worker_mode_idle_stop,
},
{
.quant = 100,
.start = ibutton_worker_mode_read_start,
.tick = ibutton_worker_mode_read_tick,
.stop = ibutton_worker_mode_read_stop,
},
{
.quant = 1000,
.start = ibutton_worker_mode_write_start,
.tick = ibutton_worker_mode_write_tick,
.stop = ibutton_worker_mode_write_stop,
},
{
.quant = 1000,
.start = ibutton_worker_mode_emulate_start,
.tick = ibutton_worker_mode_emulate_tick,
.stop = ibutton_worker_mode_emulate_stop,
},
};
/*********************** IDLE ***********************/
void ibutton_worker_mode_idle_start(iButtonWorker* worker) {
UNUSED(worker);
}
void ibutton_worker_mode_idle_tick(iButtonWorker* worker) {
UNUSED(worker);
}
void ibutton_worker_mode_idle_stop(iButtonWorker* worker) {
UNUSED(worker);
}
/*********************** READ ***********************/
typedef struct {
uint32_t last_dwt_value;
FuriStreamBuffer* stream;
} iButtonReadContext;
void ibutton_worker_comparator_callback(bool level, void* context) {
iButtonReadContext* read_context = context;
uint32_t current_dwt_value = DWT->CYCCNT;
LevelDuration data =
level_duration_make(level, current_dwt_value - read_context->last_dwt_value);
furi_stream_buffer_send(read_context->stream, &data, sizeof(LevelDuration), 0);
read_context->last_dwt_value = current_dwt_value;
}
bool ibutton_worker_read_comparator(iButtonWorker* worker) {
bool result = false;
protocol_dict_decoders_start(worker->protocols);
furi_hal_rfid_pins_reset();
// pulldown pull pin, we sense the signal through the analog part of the RFID schematic
furi_hal_rfid_pin_pull_pulldown();
iButtonReadContext read_context = {
.last_dwt_value = DWT->CYCCNT,
.stream = furi_stream_buffer_alloc(sizeof(LevelDuration) * 512, 1),
};
furi_hal_rfid_comp_set_callback(ibutton_worker_comparator_callback, &read_context);
furi_hal_rfid_comp_start();
uint32_t tick_start = furi_get_tick();
while(true) {
LevelDuration level;
size_t ret =
furi_stream_buffer_receive(read_context.stream, &level, sizeof(LevelDuration), 100);
if((furi_get_tick() - tick_start) > 100) {
break;
}
if(ret > 0) {
ProtocolId decoded_index = protocol_dict_decoders_feed(
worker->protocols,
level_duration_get_level(level),
level_duration_get_duration(level));
if(decoded_index == PROTOCOL_NO) continue;
protocol_dict_get_data(
worker->protocols, decoded_index, worker->key_data, ibutton_key_get_max_size());
switch(decoded_index) {
case iButtonProtocolCyfral:
furi_check(worker->key_p != NULL);
ibutton_key_set_type(worker->key_p, iButtonKeyCyfral);
ibutton_key_set_data(worker->key_p, worker->key_data, ibutton_key_get_max_size());
result = true;
break;
case iButtonProtocolMetakom:
furi_check(worker->key_p != NULL);
ibutton_key_set_type(worker->key_p, iButtonKeyMetakom);
ibutton_key_set_data(worker->key_p, worker->key_data, ibutton_key_get_max_size());
result = true;
break;
default:
break;
}
}
}
furi_hal_rfid_comp_stop();
furi_hal_rfid_comp_set_callback(NULL, NULL);
furi_hal_rfid_pins_reset();
furi_stream_buffer_free(read_context.stream);
return result;
}
bool ibutton_worker_read_dallas(iButtonWorker* worker) {
bool result = false;
onewire_host_start(worker->host);
furi_delay_ms(100);
FURI_CRITICAL_ENTER();
if(onewire_host_search(worker->host, worker->key_data, NORMAL_SEARCH)) {
onewire_host_reset_search(worker->host);
// key found, verify
if(onewire_host_reset(worker->host)) {
onewire_host_write(worker->host, DS1990_CMD_READ_ROM);
bool key_valid = true;
for(uint8_t i = 0; i < ibutton_key_get_max_size(); i++) {
if(onewire_host_read(worker->host) != worker->key_data[i]) {
key_valid = false;
break;
}
}
if(key_valid) {
result = true;
furi_check(worker->key_p != NULL);
ibutton_key_set_type(worker->key_p, iButtonKeyDS1990);
ibutton_key_set_data(worker->key_p, worker->key_data, ibutton_key_get_max_size());
}
}
} else {
onewire_host_reset_search(worker->host);
}
onewire_host_stop(worker->host);
FURI_CRITICAL_EXIT();
return result;
}
void ibutton_worker_mode_read_start(iButtonWorker* worker) {
UNUSED(worker);
furi_hal_power_enable_otg();
}
void ibutton_worker_mode_read_tick(iButtonWorker* worker) {
bool valid = false;
if(ibutton_worker_read_dallas(worker)) {
valid = true;
} else if(ibutton_worker_read_comparator(worker)) {
valid = true;
}
if(valid) {
if(worker->read_cb != NULL) {
worker->read_cb(worker->cb_ctx);
}
ibutton_worker_switch_mode(worker, iButtonWorkerIdle);
}
}
void ibutton_worker_mode_read_stop(iButtonWorker* worker) {
UNUSED(worker);
furi_hal_power_disable_otg();
}
/*********************** EMULATE ***********************/
static void onewire_slave_callback(void* context) {
furi_assert(context);
iButtonWorker* worker = context;
ibutton_worker_notify_emulate(worker);
}
void ibutton_worker_emulate_dallas_start(iButtonWorker* worker) {
uint8_t* device_id = onewire_device_get_id_p(worker->device);
const uint8_t* key_id = ibutton_key_get_data_p(worker->key_p);
const uint8_t key_size = ibutton_key_get_max_size();
memcpy(device_id, key_id, key_size);
onewire_slave_attach(worker->slave, worker->device);
onewire_slave_set_result_callback(worker->slave, onewire_slave_callback, worker);
onewire_slave_start(worker->slave);
}
void ibutton_worker_emulate_dallas_stop(iButtonWorker* worker) {
onewire_slave_stop(worker->slave);
onewire_slave_detach(worker->slave);
}
void ibutton_worker_emulate_timer_cb(void* context) {
furi_assert(context);
iButtonWorker* worker = context;
const LevelDuration level_duration =
protocol_dict_encoder_yield(worker->protocols, worker->protocol_to_encode);
const bool level = level_duration_get_level(level_duration);
furi_hal_ibutton_emulate_set_next(level);
furi_hal_ibutton_pin_write(level);
}
void ibutton_worker_emulate_timer_start(iButtonWorker* worker) {
furi_assert(worker->key_p);
const uint8_t* key_id = ibutton_key_get_data_p(worker->key_p);
const uint8_t key_size = ibutton_key_get_max_size();
switch(ibutton_key_get_type(worker->key_p)) {
case iButtonKeyDS1990:
return;
break;
case iButtonKeyCyfral:
worker->protocol_to_encode = iButtonProtocolCyfral;
break;
case iButtonKeyMetakom:
worker->protocol_to_encode = iButtonProtocolMetakom;
break;
}
protocol_dict_set_data(worker->protocols, worker->protocol_to_encode, key_id, key_size);
protocol_dict_encoder_start(worker->protocols, worker->protocol_to_encode);
furi_hal_ibutton_pin_configure();
furi_hal_ibutton_emulate_start(0, ibutton_worker_emulate_timer_cb, worker);
}
void ibutton_worker_emulate_timer_stop(iButtonWorker* worker) {
UNUSED(worker);
furi_hal_ibutton_emulate_stop();
}
void ibutton_worker_mode_emulate_start(iButtonWorker* worker) {
furi_assert(worker->key_p);
furi_hal_rfid_pins_reset();
furi_hal_rfid_pin_pull_pulldown();
switch(ibutton_key_get_type(worker->key_p)) {
case iButtonKeyDS1990:
ibutton_worker_emulate_dallas_start(worker);
break;
case iButtonKeyCyfral:
case iButtonKeyMetakom:
ibutton_worker_emulate_timer_start(worker);
break;
}
}
void ibutton_worker_mode_emulate_tick(iButtonWorker* worker) {
UNUSED(worker);
}
void ibutton_worker_mode_emulate_stop(iButtonWorker* worker) {
furi_assert(worker->key_p);
furi_hal_rfid_pins_reset();
switch(ibutton_key_get_type(worker->key_p)) {
case iButtonKeyDS1990:
ibutton_worker_emulate_dallas_stop(worker);
break;
case iButtonKeyCyfral:
case iButtonKeyMetakom:
ibutton_worker_emulate_timer_stop(worker);
break;
}
}
/*********************** WRITE ***********************/
void ibutton_worker_mode_write_start(iButtonWorker* worker) {
furi_hal_power_enable_otg();
onewire_host_start(worker->host);
}
void ibutton_worker_mode_write_tick(iButtonWorker* worker) {
furi_check(worker->key_p != NULL);
iButtonWriterResult writer_result = ibutton_writer_write(worker->writer, worker->key_p);
iButtonWorkerWriteResult result;
switch(writer_result) {
case iButtonWriterOK:
result = iButtonWorkerWriteOK;
break;
case iButtonWriterSameKey:
result = iButtonWorkerWriteSameKey;
break;
case iButtonWriterNoDetect:
result = iButtonWorkerWriteNoDetect;
break;
case iButtonWriterCannotWrite:
result = iButtonWorkerWriteCannotWrite;
break;
default:
result = iButtonWorkerWriteNoDetect;
break;
}
if(worker->write_cb != NULL) {
worker->write_cb(worker->cb_ctx, result);
}
}
void ibutton_worker_mode_write_stop(iButtonWorker* worker) {
furi_hal_power_disable_otg();
onewire_host_stop(worker->host);
}