mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-25 14:22:27 +03:00
206 lines
7.1 KiB
C
206 lines
7.1 KiB
C
#include "../app.h"
|
|
|
|
/* Copyright (C) 2022-2023 Salvatore Sanfilippo -- All Rights Reserved
|
|
* See the LICENSE file for information about the license.
|
|
*
|
|
* ----------------------------------------------------------
|
|
* ProtoView chat protocol. This is just a fun test protocol
|
|
* that can be used between two Flippers in order to send
|
|
* and receive text messages.
|
|
* ----------------------------------------------------------
|
|
*
|
|
* Protocol description
|
|
* ====================
|
|
*
|
|
* The protocol works with different data rates. However here is defined
|
|
* to use a short pulse/gap duration of 300us and a long pulse/gap
|
|
* duration of 600us. Even with the Flipper hardware, the protocol works
|
|
* with 100/200us, but becomes less reliable and standard presets can't
|
|
* be used because of the higher data rate.
|
|
*
|
|
* In the following description we have that:
|
|
*
|
|
* "1" represents a pulse of one-third bit time (300us)
|
|
* "0" represents a gap of one-third bit time (300us)
|
|
*
|
|
* The message starts with a preamble + a sync pattern:
|
|
*
|
|
* preamble = 1010101010101010 x 3
|
|
* sync = 1100110011001010
|
|
*
|
|
* The a variable amount of bytes follow, where each bit
|
|
* is encoded in the following way:
|
|
*
|
|
* zero 100 (300 us pulse, 600 us gap)
|
|
* one 110 (600 us pulse, 300 us gap)
|
|
*
|
|
* Bytes are sent MSB first, so receiving, in sequence, bits
|
|
* 11100001, means byte E1.
|
|
*
|
|
* This is the data format:
|
|
*
|
|
* +--+------+-------+--+--+--+
|
|
* |SL|Sender|Message|FF|AA|CS|
|
|
* +--+------+-------+--+--+--+
|
|
* | | |
|
|
* | | \_ N bytes of message terminated by FF AA + 1 byte of checksum
|
|
* | |
|
|
* | \_ SL bytes of sender name
|
|
* \
|
|
* \_ 1 byte of sender len, 8 bit unsigned integer.
|
|
*
|
|
*
|
|
* Checksum = sum of bytes modulo 256, with checksum set
|
|
* to 0 for the computation.
|
|
*
|
|
* Design notes
|
|
* ============
|
|
*
|
|
* The protocol is designed in order to have certain properties:
|
|
*
|
|
* 1. Pulses and gaps can only be 100 or 200 microseconds, so the
|
|
* message can be described, encoded and decoded with only two
|
|
* fixed durations.
|
|
*
|
|
* 2. The preamble + sync is designed to have a well recognizable
|
|
* pattern that can't be reproduced just for accident inside
|
|
* the encoded pattern. There is no combinatio of encoded bits
|
|
* leading to the preamble+sync. Also the sync pattern final
|
|
* part can't be mistaken for actual bits of data, since it
|
|
* contains alternating short pulses/gaps at 100us.
|
|
*
|
|
* 3. Data encoding wastes some bandwidth in order to be more
|
|
* robust. Even so, with a 300us clock period, a single bit
|
|
* bit takes 900us, reaching a data transfer of 138 characters per
|
|
* second. More than enough for the simple chat we have here.
|
|
*/
|
|
|
|
static bool decode(uint8_t* bits, uint32_t numbytes, uint32_t numbits, ProtoViewMsgInfo* info) {
|
|
const char* sync_pattern = "1010101010101010" // Preamble
|
|
"1100110011001010"; // Sync
|
|
uint8_t sync_len = 32;
|
|
|
|
/* This is a variable length message, however the minimum length
|
|
* requires a sender len byte (of value zero) and the terminator
|
|
* FF 00 plus checksum: a total of 4 bytes. */
|
|
if(numbits - sync_len < 8 * 4) return false;
|
|
|
|
uint64_t off = bitmap_seek_bits(bits, numbytes, 0, numbits, sync_pattern);
|
|
if(off == BITMAP_SEEK_NOT_FOUND) return false;
|
|
FURI_LOG_E(TAG, "Chat preamble+sync found");
|
|
|
|
/* If there is room on the left, let's mark the start of the message
|
|
* a bit before: we don't try to detect all the preamble, but only
|
|
* the first part, however it is likely present. */
|
|
if(off >= 16) {
|
|
off -= 16;
|
|
sync_len += 16;
|
|
}
|
|
|
|
info->start_off = off;
|
|
off += sync_len; /* Skip preamble and sync. */
|
|
|
|
uint8_t raw[64] = {(uint8_t)'.'};
|
|
uint32_t decoded =
|
|
convert_from_line_code(raw, sizeof(raw), bits, numbytes, off, "100", "110"); /* PWM */
|
|
FURI_LOG_E(TAG, "Chat decoded bits: %lu", decoded);
|
|
|
|
if(decoded < 8 * 4) return false; /* Min message len. */
|
|
|
|
// The message needs to have a two bytes terminator before
|
|
// the checksum.
|
|
uint32_t j;
|
|
for(j = 0; j < sizeof(raw) - 1; j++)
|
|
if(raw[j] == 0xff && raw[j + 1] == 0xaa) break;
|
|
|
|
if(j == sizeof(raw) - 1) {
|
|
FURI_LOG_E(TAG, "Chat: terminator not found");
|
|
return false; // No terminator found.
|
|
}
|
|
|
|
uint32_t datalen = j + 3; // If the terminator was found at j, then
|
|
// we need to sum three more bytes to have
|
|
// the len: FF itself, AA, checksum.
|
|
info->pulses_count = sync_len + 8 * 3 * datalen;
|
|
|
|
// Check if the control sum matches.
|
|
if(sum_bytes(raw, datalen - 1, 0) != raw[datalen - 1]) {
|
|
FURI_LOG_E(TAG, "Chat: checksum mismatch");
|
|
return false;
|
|
}
|
|
|
|
// Check if the length of the sender looks sane
|
|
uint8_t senderlen = raw[0];
|
|
if(senderlen >= sizeof(raw)) {
|
|
FURI_LOG_E(TAG, "Chat: invalid sender length");
|
|
return false; // Overflow
|
|
}
|
|
|
|
fieldset_add_str(info->fieldset, "sender", (char*)raw + 1, senderlen);
|
|
fieldset_add_str(
|
|
info->fieldset, "message", (char*)raw + 1 + senderlen, datalen - senderlen - 4);
|
|
return true;
|
|
}
|
|
|
|
/* Give fields and defaults for the signal creator. */
|
|
static void get_fields(ProtoViewFieldSet* fieldset) {
|
|
fieldset_add_str(fieldset, "sender", "Carol", 5);
|
|
fieldset_add_str(fieldset, "message", "Anyone hearing?", 15);
|
|
}
|
|
|
|
/* Create a signal. */
|
|
static void build_message(RawSamplesBuffer* samples, ProtoViewFieldSet* fs) {
|
|
uint32_t te = 300; /* Short pulse duration in microseconds.
|
|
Our protocol needs three symbol times to send
|
|
a bit, so 300 us per bit = 3.33 kBaud. */
|
|
|
|
// Preamble: 24 alternating 300us pulse/gap pairs.
|
|
for(int j = 0; j < 24; j++) {
|
|
raw_samples_add(samples, true, te);
|
|
raw_samples_add(samples, false, te);
|
|
}
|
|
|
|
// Sync: 3 alternating 600 us pulse/gap pairs.
|
|
for(int j = 0; j < 3; j++) {
|
|
raw_samples_add(samples, true, te * 2);
|
|
raw_samples_add(samples, false, te * 2);
|
|
}
|
|
|
|
// Sync: plus 2 alternating 300 us pluse/gap pairs.
|
|
for(int j = 0; j < 2; j++) {
|
|
raw_samples_add(samples, true, te);
|
|
raw_samples_add(samples, false, te);
|
|
}
|
|
|
|
// Data: build the array.
|
|
uint32_t datalen = 1 + fs->fields[0]->len + // Userlen + Username
|
|
fs->fields[1]->len + 3; // Message + FF + 00 + CRC
|
|
uint8_t *data = malloc(datalen), *p = data;
|
|
*p++ = fs->fields[0]->len;
|
|
memcpy(p, fs->fields[0]->str, fs->fields[0]->len);
|
|
p += fs->fields[0]->len;
|
|
memcpy(p, fs->fields[1]->str, fs->fields[1]->len);
|
|
p += fs->fields[1]->len;
|
|
*p++ = 0xff;
|
|
*p++ = 0xaa;
|
|
*p = sum_bytes(data, datalen - 1, 0);
|
|
|
|
// Emit bits
|
|
for(uint32_t j = 0; j < datalen * 8; j++) {
|
|
if(bitmap_get(data, datalen, j)) {
|
|
raw_samples_add(samples, true, te * 2);
|
|
raw_samples_add(samples, false, te);
|
|
} else {
|
|
raw_samples_add(samples, true, te);
|
|
raw_samples_add(samples, false, te * 2);
|
|
}
|
|
}
|
|
free(data);
|
|
}
|
|
|
|
ProtoViewDecoder ProtoViewChatDecoder = {
|
|
.name = "ProtoView chat",
|
|
.decode = decode,
|
|
.get_fields = get_fields,
|
|
.build_message = build_message};
|