mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-24 22:07:14 +03:00
d92b0a82cc
"A long time ago in a galaxy far, far away...." we started NFC subsystem refactoring. Starring: - @gornekich - NFC refactoring project lead, architect, senior developer - @gsurkov - architect, senior developer - @RebornedBrain - senior developer Supporting roles: - @skotopes, @DrZlo13, @hedger - general architecture advisors, code review - @Astrrra, @doomwastaken, @Hellitron, @ImagineVagon333 - quality assurance Special thanks: @bettse, @pcunning, @nxv, @noproto, @AloneLiberty and everyone else who has been helping us all this time and contributing valuable knowledges, ideas and source code.
258 lines
8.2 KiB
C
258 lines
8.2 KiB
C
#include "st25r3916_reg.h"
|
|
|
|
#include <furi.h>
|
|
|
|
#define ST25R3916_WRITE_MODE \
|
|
(0U << 6) /*!< ST25R3916 Operation Mode: Write */
|
|
#define ST25R3916_READ_MODE \
|
|
(1U << 6) /*!< ST25R3916 Operation Mode: Read */
|
|
#define ST25R3916_CMD_MODE \
|
|
(3U << 6) /*!< ST25R3916 Operation Mode: Direct Command */
|
|
#define ST25R3916_FIFO_LOAD \
|
|
(0x80U) /*!< ST25R3916 Operation Mode: FIFO Load */
|
|
#define ST25R3916_FIFO_READ \
|
|
(0x9FU) /*!< ST25R3916 Operation Mode: FIFO Read */
|
|
#define ST25R3916_PT_A_CONFIG_LOAD \
|
|
(0xA0U) /*!< ST25R3916 Operation Mode: Passive Target Memory A-Config Load */
|
|
#define ST25R3916_PT_F_CONFIG_LOAD \
|
|
(0xA8U) /*!< ST25R3916 Operation Mode: Passive Target Memory F-Config Load */
|
|
#define ST25R3916_PT_TSN_DATA_LOAD \
|
|
(0xACU) /*!< ST25R3916 Operation Mode: Passive Target Memory TSN Load */
|
|
#define ST25R3916_PT_MEM_READ \
|
|
(0xBFU) /*!< ST25R3916 Operation Mode: Passive Target Memory Read */
|
|
|
|
#define ST25R3916_CMD_LEN \
|
|
(1U) /*!< ST25R3916 CMD length */
|
|
#define ST25R3916_FIFO_DEPTH (512U)
|
|
#define ST25R3916_BUF_LEN \
|
|
(ST25R3916_CMD_LEN + \
|
|
ST25R3916_FIFO_DEPTH) /*!< ST25R3916 communication buffer: CMD + FIFO length */
|
|
|
|
static void st25r3916_reg_tx_byte(FuriHalSpiBusHandle* handle, uint8_t byte) {
|
|
uint8_t val = byte;
|
|
furi_hal_spi_bus_tx(handle, &val, 1, 5);
|
|
}
|
|
|
|
void st25r3916_read_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* val) {
|
|
furi_assert(handle);
|
|
st25r3916_read_burst_regs(handle, reg, val, 1);
|
|
}
|
|
|
|
void st25r3916_read_burst_regs(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t reg_start,
|
|
uint8_t* values,
|
|
uint8_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(values);
|
|
furi_assert(length);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
|
|
if(reg_start & ST25R3916_SPACE_B) {
|
|
// Send direct command first
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_CMD_SPACE_B_ACCESS);
|
|
}
|
|
st25r3916_reg_tx_byte(handle, (reg_start & ~ST25R3916_SPACE_B) | ST25R3916_READ_MODE);
|
|
furi_hal_spi_bus_rx(handle, values, length, 5);
|
|
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_write_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t val) {
|
|
furi_assert(handle);
|
|
uint8_t reg_val = val;
|
|
st25r3916_write_burst_regs(handle, reg, ®_val, 1);
|
|
}
|
|
|
|
void st25r3916_write_burst_regs(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t reg_start,
|
|
const uint8_t* values,
|
|
uint8_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(values);
|
|
furi_assert(length);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
|
|
if(reg_start & ST25R3916_SPACE_B) {
|
|
// Send direct command first
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_CMD_SPACE_B_ACCESS);
|
|
}
|
|
st25r3916_reg_tx_byte(handle, (reg_start & ~ST25R3916_SPACE_B) | ST25R3916_WRITE_MODE);
|
|
furi_hal_spi_bus_tx(handle, values, length, 5);
|
|
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_reg_write_fifo(FuriHalSpiBusHandle* handle, const uint8_t* buff, size_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(buff);
|
|
furi_assert(length);
|
|
furi_assert(length <= ST25R3916_FIFO_DEPTH);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_FIFO_LOAD);
|
|
furi_hal_spi_bus_tx(handle, buff, length, 200);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_reg_read_fifo(FuriHalSpiBusHandle* handle, uint8_t* buff, size_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(buff);
|
|
furi_assert(length);
|
|
furi_assert(length <= ST25R3916_FIFO_DEPTH);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_FIFO_READ);
|
|
furi_hal_spi_bus_rx(handle, buff, length, 200);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_write_pta_mem(FuriHalSpiBusHandle* handle, const uint8_t* values, size_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(values);
|
|
furi_assert(length);
|
|
furi_assert(length <= ST25R3916_PTM_LEN);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_PT_A_CONFIG_LOAD);
|
|
furi_hal_spi_bus_tx(handle, values, length, 200);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_read_pta_mem(FuriHalSpiBusHandle* handle, uint8_t* buff, size_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(buff);
|
|
furi_assert(length);
|
|
furi_assert(length <= ST25R3916_PTM_LEN);
|
|
|
|
uint8_t tmp_buff[ST25R3916_PTM_LEN + 1];
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_PT_MEM_READ);
|
|
furi_hal_spi_bus_rx(handle, tmp_buff, length + 1, 200);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
memcpy(buff, tmp_buff + 1, length);
|
|
}
|
|
|
|
void st25r3916_write_ptf_mem(FuriHalSpiBusHandle* handle, const uint8_t* values, size_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(values);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_PT_F_CONFIG_LOAD);
|
|
furi_hal_spi_bus_tx(handle, values, length, 200);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_write_pttsn_mem(FuriHalSpiBusHandle* handle, uint8_t* buff, size_t length) {
|
|
furi_assert(handle);
|
|
furi_assert(buff);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_PT_TSN_DATA_LOAD);
|
|
furi_hal_spi_bus_tx(handle, buff, length, 200);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_direct_cmd(FuriHalSpiBusHandle* handle, uint8_t cmd) {
|
|
furi_assert(handle);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, cmd | ST25R3916_CMD_MODE);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_read_test_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* val) {
|
|
furi_assert(handle);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_CMD_TEST_ACCESS);
|
|
st25r3916_reg_tx_byte(handle, reg | ST25R3916_READ_MODE);
|
|
furi_hal_spi_bus_rx(handle, val, 1, 5);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_write_test_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t val) {
|
|
furi_assert(handle);
|
|
|
|
furi_hal_gpio_write(handle->cs, false);
|
|
st25r3916_reg_tx_byte(handle, ST25R3916_CMD_TEST_ACCESS);
|
|
st25r3916_reg_tx_byte(handle, reg | ST25R3916_WRITE_MODE);
|
|
furi_hal_spi_bus_tx(handle, &val, 1, 5);
|
|
furi_hal_gpio_write(handle->cs, true);
|
|
}
|
|
|
|
void st25r3916_clear_reg_bits(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t clr_mask) {
|
|
furi_assert(handle);
|
|
|
|
uint8_t reg_val = 0;
|
|
st25r3916_read_reg(handle, reg, ®_val);
|
|
if((reg_val & ~clr_mask) != reg_val) {
|
|
reg_val &= ~clr_mask;
|
|
st25r3916_write_reg(handle, reg, reg_val);
|
|
}
|
|
}
|
|
|
|
void st25r3916_set_reg_bits(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t set_mask) {
|
|
furi_assert(handle);
|
|
|
|
uint8_t reg_val = 0;
|
|
st25r3916_read_reg(handle, reg, ®_val);
|
|
if((reg_val | set_mask) != reg_val) {
|
|
reg_val |= set_mask;
|
|
st25r3916_write_reg(handle, reg, reg_val);
|
|
}
|
|
}
|
|
|
|
void st25r3916_change_reg_bits(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t reg,
|
|
uint8_t mask,
|
|
uint8_t value) {
|
|
furi_assert(handle);
|
|
|
|
st25r3916_modify_reg(handle, reg, mask, (mask & value));
|
|
}
|
|
|
|
void st25r3916_modify_reg(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t reg,
|
|
uint8_t clr_mask,
|
|
uint8_t set_mask) {
|
|
furi_assert(handle);
|
|
|
|
uint8_t reg_val = 0;
|
|
uint8_t new_val = 0;
|
|
st25r3916_read_reg(handle, reg, ®_val);
|
|
new_val = (reg_val & ~clr_mask) | set_mask;
|
|
if(new_val != reg_val) {
|
|
st25r3916_write_reg(handle, reg, new_val);
|
|
}
|
|
}
|
|
|
|
void st25r3916_change_test_reg_bits(
|
|
FuriHalSpiBusHandle* handle,
|
|
uint8_t reg,
|
|
uint8_t mask,
|
|
uint8_t value) {
|
|
furi_assert(handle);
|
|
|
|
uint8_t reg_val = 0;
|
|
uint8_t new_val = 0;
|
|
st25r3916_read_test_reg(handle, reg, ®_val);
|
|
new_val = (reg_val & ~mask) | (mask & value);
|
|
if(new_val != reg_val) {
|
|
st25r3916_write_test_reg(handle, reg, new_val);
|
|
}
|
|
}
|
|
|
|
bool st25r3916_check_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t mask, uint8_t val) {
|
|
furi_assert(handle);
|
|
|
|
uint8_t reg_val = 0;
|
|
st25r3916_read_reg(handle, reg, ®_val);
|
|
return ((reg_val & mask) == val);
|
|
}
|