mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-15 16:52:38 +03:00
2f3ea9494e
* gpio, hsem, crypto: switch from HAL to LL/registers * Moved GPIO initialization to furi_hal * More HAL removed * All HAL modules disabled * HAL is finally removed * hal_gpio -> furi_hal_gpio, main.h removed * Bootloader build fix * RTOS config moved to freertos-glue * delay -> furi_hal_delay Co-authored-by: あく <alleteam@gmail.com>
402 lines
12 KiB
C
402 lines
12 KiB
C
#include <furi_hal_power.h>
|
|
#include <furi_hal_clock.h>
|
|
#include <furi_hal_bt.h>
|
|
#include <furi_hal_resources.h>
|
|
|
|
#include <stm32wbxx_ll_rcc.h>
|
|
#include <stm32wbxx_ll_pwr.h>
|
|
#include <stm32wbxx_ll_hsem.h>
|
|
#include <stm32wbxx_ll_cortex.h>
|
|
#include <stm32wbxx_ll_gpio.h>
|
|
|
|
#include <hw_conf.h>
|
|
#include <bq27220.h>
|
|
#include <bq25896.h>
|
|
|
|
#include <furi.h>
|
|
|
|
#define TAG "FuriHalPower"
|
|
|
|
typedef struct {
|
|
volatile uint8_t insomnia;
|
|
volatile uint8_t deep_insomnia;
|
|
volatile uint8_t suppress_charge;
|
|
} FuriHalPower;
|
|
|
|
static volatile FuriHalPower furi_hal_power = {
|
|
.insomnia = 0,
|
|
.deep_insomnia = 1,
|
|
.suppress_charge = 0,
|
|
};
|
|
|
|
const ParamCEDV cedv = {
|
|
.cedv_conf.gauge_conf =
|
|
{
|
|
.CCT = 1,
|
|
.CSYNC = 0,
|
|
.EDV_CMP = 0,
|
|
.SC = 1,
|
|
.FIXED_EDV0 = 1,
|
|
.FCC_LIM = 1,
|
|
.FC_FOR_VDQ = 1,
|
|
.IGNORE_SD = 1,
|
|
.SME0 = 0,
|
|
},
|
|
.full_charge_cap = 2101,
|
|
.design_cap = 2101,
|
|
.EDV0 = 3300,
|
|
.EDV1 = 3321,
|
|
.EDV2 = 3355,
|
|
.EMF = 3679,
|
|
.C0 = 430,
|
|
.C1 = 0,
|
|
.R1 = 408,
|
|
.R0 = 334,
|
|
.T0 = 4626,
|
|
.TC = 11,
|
|
.DOD0 = 4044,
|
|
.DOD10 = 3905,
|
|
.DOD20 = 3807,
|
|
.DOD30 = 3718,
|
|
.DOD40 = 3642,
|
|
.DOD50 = 3585,
|
|
.DOD60 = 3546,
|
|
.DOD70 = 3514,
|
|
.DOD80 = 3477,
|
|
.DOD90 = 3411,
|
|
.DOD100 = 3299,
|
|
};
|
|
|
|
void HAL_RCC_CSSCallback(void) {
|
|
// TODO: notify user about issue with HSE
|
|
furi_hal_power_reset();
|
|
}
|
|
|
|
void furi_hal_power_init() {
|
|
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
|
|
LL_PWR_SMPS_SetMode(LL_PWR_SMPS_STEP_DOWN);
|
|
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bq27220_init(&furi_hal_i2c_handle_power, &cedv);
|
|
bq25896_init(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
|
|
FURI_LOG_I(TAG, "Init OK");
|
|
}
|
|
|
|
uint16_t furi_hal_power_insomnia_level() {
|
|
return furi_hal_power.insomnia;
|
|
}
|
|
|
|
void furi_hal_power_insomnia_enter() {
|
|
FURI_CRITICAL_ENTER();
|
|
furi_assert(furi_hal_power.insomnia < UINT8_MAX);
|
|
furi_hal_power.insomnia++;
|
|
FURI_CRITICAL_EXIT();
|
|
}
|
|
|
|
void furi_hal_power_insomnia_exit() {
|
|
FURI_CRITICAL_ENTER();
|
|
furi_assert(furi_hal_power.insomnia > 0);
|
|
furi_hal_power.insomnia--;
|
|
FURI_CRITICAL_EXIT();
|
|
}
|
|
|
|
bool furi_hal_power_sleep_available() {
|
|
return furi_hal_power.insomnia == 0;
|
|
}
|
|
|
|
bool furi_hal_power_deep_sleep_available() {
|
|
return furi_hal_bt_is_alive() && furi_hal_power.deep_insomnia == 0;
|
|
}
|
|
|
|
void furi_hal_power_light_sleep() {
|
|
__WFI();
|
|
}
|
|
|
|
void furi_hal_power_deep_sleep() {
|
|
while(LL_HSEM_1StepLock(HSEM, CFG_HW_RCC_SEMID))
|
|
;
|
|
|
|
if(!LL_HSEM_1StepLock(HSEM, CFG_HW_ENTRY_STOP_MODE_SEMID)) {
|
|
if(LL_PWR_IsActiveFlag_C2DS()) {
|
|
// Release ENTRY_STOP_MODE semaphore
|
|
LL_HSEM_ReleaseLock(HSEM, CFG_HW_ENTRY_STOP_MODE_SEMID, 0);
|
|
|
|
// The switch on HSI before entering Stop Mode is required
|
|
furi_hal_clock_switch_to_hsi();
|
|
}
|
|
} else {
|
|
/**
|
|
* The switch on HSI before entering Stop Mode is required
|
|
*/
|
|
furi_hal_clock_switch_to_hsi();
|
|
}
|
|
|
|
/* Release RCC semaphore */
|
|
LL_HSEM_ReleaseLock(HSEM, CFG_HW_RCC_SEMID, 0);
|
|
|
|
// Prepare deep sleep
|
|
LL_PWR_SetPowerMode(LL_PWR_MODE_STOP1);
|
|
LL_LPM_EnableDeepSleep();
|
|
|
|
#if defined(__CC_ARM)
|
|
// Force store operations
|
|
__force_stores();
|
|
#endif
|
|
|
|
__WFI();
|
|
|
|
/* Release ENTRY_STOP_MODE semaphore */
|
|
LL_HSEM_ReleaseLock(HSEM, CFG_HW_ENTRY_STOP_MODE_SEMID, 0);
|
|
|
|
while(LL_HSEM_1StepLock(HSEM, CFG_HW_RCC_SEMID))
|
|
;
|
|
|
|
if(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) {
|
|
furi_hal_clock_switch_to_pll();
|
|
}
|
|
|
|
LL_HSEM_ReleaseLock(HSEM, CFG_HW_RCC_SEMID, 0);
|
|
}
|
|
|
|
void furi_hal_power_sleep() {
|
|
if(furi_hal_power_deep_sleep_available()) {
|
|
furi_hal_power_deep_sleep();
|
|
} else {
|
|
furi_hal_power_light_sleep();
|
|
}
|
|
}
|
|
|
|
uint8_t furi_hal_power_get_pct() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
uint8_t ret = bq27220_get_state_of_charge(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
uint8_t furi_hal_power_get_bat_health_pct() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
uint8_t ret = bq27220_get_state_of_health(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
bool furi_hal_power_is_charging() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bool ret = bq25896_is_charging(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
void furi_hal_power_off() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bq25896_poweroff(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
|
|
void furi_hal_power_reset() {
|
|
NVIC_SystemReset();
|
|
}
|
|
|
|
void furi_hal_power_enable_otg() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bq25896_enable_otg(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
|
|
void furi_hal_power_disable_otg() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bq25896_disable_otg(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
|
|
bool furi_hal_power_is_otg_enabled() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bool ret = bq25896_is_otg_enabled(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
void furi_hal_power_check_otg_status() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
if(bq25896_check_otg_fault(&furi_hal_i2c_handle_power))
|
|
bq25896_disable_otg(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
|
|
uint32_t furi_hal_power_get_battery_remaining_capacity() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
uint32_t ret = bq27220_get_remaining_capacity(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
uint32_t furi_hal_power_get_battery_full_capacity() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
uint32_t ret = bq27220_get_full_charge_capacity(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
float furi_hal_power_get_battery_voltage(FuriHalPowerIC ic) {
|
|
float ret = 0.0f;
|
|
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
if(ic == FuriHalPowerICCharger) {
|
|
ret = (float)bq25896_get_vbat_voltage(&furi_hal_i2c_handle_power) / 1000.0f;
|
|
} else if(ic == FuriHalPowerICFuelGauge) {
|
|
ret = (float)bq27220_get_voltage(&furi_hal_i2c_handle_power) / 1000.0f;
|
|
}
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
|
|
return ret;
|
|
}
|
|
|
|
float furi_hal_power_get_battery_current(FuriHalPowerIC ic) {
|
|
float ret = 0.0f;
|
|
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
if(ic == FuriHalPowerICCharger) {
|
|
ret = (float)bq25896_get_vbat_current(&furi_hal_i2c_handle_power) / 1000.0f;
|
|
} else if(ic == FuriHalPowerICFuelGauge) {
|
|
ret = (float)bq27220_get_current(&furi_hal_i2c_handle_power) / 1000.0f;
|
|
}
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static float furi_hal_power_get_battery_temperature_internal(FuriHalPowerIC ic) {
|
|
float ret = 0.0f;
|
|
|
|
if(ic == FuriHalPowerICCharger) {
|
|
// Linear approximation, +/- 5 C
|
|
ret = (71.0f - (float)bq25896_get_ntc_mpct(&furi_hal_i2c_handle_power) / 1000) / 0.6f;
|
|
} else if(ic == FuriHalPowerICFuelGauge) {
|
|
ret = ((float)bq27220_get_temperature(&furi_hal_i2c_handle_power) - 2731.0f) / 10.0f;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
float furi_hal_power_get_battery_temperature(FuriHalPowerIC ic) {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
float ret = furi_hal_power_get_battery_temperature_internal(ic);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
|
|
return ret;
|
|
}
|
|
|
|
float furi_hal_power_get_usb_voltage() {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
float ret = (float)bq25896_get_vbus_voltage(&furi_hal_i2c_handle_power) / 1000.0f;
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
return ret;
|
|
}
|
|
|
|
void furi_hal_power_dump_state() {
|
|
BatteryStatus battery_status;
|
|
OperationStatus operation_status;
|
|
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
|
|
if(bq27220_get_battery_status(&furi_hal_i2c_handle_power, &battery_status) == BQ27220_ERROR ||
|
|
bq27220_get_operation_status(&furi_hal_i2c_handle_power, &operation_status) ==
|
|
BQ27220_ERROR) {
|
|
printf("Failed to get bq27220 status. Communication error.\r\n");
|
|
} else {
|
|
// Operation status register
|
|
printf(
|
|
"bq27220: CALMD: %d, SEC0: %d, SEC1: %d, EDV2: %d, VDQ: %d, INITCOMP: %d, SMTH: %d, BTPINT: %d, CFGUPDATE: %d\r\n",
|
|
operation_status.CALMD,
|
|
operation_status.SEC0,
|
|
operation_status.SEC1,
|
|
operation_status.EDV2,
|
|
operation_status.VDQ,
|
|
operation_status.INITCOMP,
|
|
operation_status.SMTH,
|
|
operation_status.BTPINT,
|
|
operation_status.CFGUPDATE);
|
|
// Battery status register, part 1
|
|
printf(
|
|
"bq27220: CHGINH: %d, FC: %d, OTD: %d, OTC: %d, SLEEP: %d, OCVFAIL: %d, OCVCOMP: %d, FD: %d\r\n",
|
|
battery_status.CHGINH,
|
|
battery_status.FC,
|
|
battery_status.OTD,
|
|
battery_status.OTC,
|
|
battery_status.SLEEP,
|
|
battery_status.OCVFAIL,
|
|
battery_status.OCVCOMP,
|
|
battery_status.FD);
|
|
// Battery status register, part 2
|
|
printf(
|
|
"bq27220: DSG: %d, SYSDWN: %d, TDA: %d, BATTPRES: %d, AUTH_GD: %d, OCVGD: %d, TCA: %d, RSVD: %d\r\n",
|
|
battery_status.DSG,
|
|
battery_status.SYSDWN,
|
|
battery_status.TDA,
|
|
battery_status.BATTPRES,
|
|
battery_status.AUTH_GD,
|
|
battery_status.OCVGD,
|
|
battery_status.TCA,
|
|
battery_status.RSVD);
|
|
// Voltage and current info
|
|
printf(
|
|
"bq27220: Full capacity: %dmAh, Design capacity: %dmAh, Remaining capacity: %dmAh, State of Charge: %d%%, State of health: %d%%\r\n",
|
|
bq27220_get_full_charge_capacity(&furi_hal_i2c_handle_power),
|
|
bq27220_get_design_capacity(&furi_hal_i2c_handle_power),
|
|
bq27220_get_remaining_capacity(&furi_hal_i2c_handle_power),
|
|
bq27220_get_state_of_charge(&furi_hal_i2c_handle_power),
|
|
bq27220_get_state_of_health(&furi_hal_i2c_handle_power));
|
|
printf(
|
|
"bq27220: Voltage: %dmV, Current: %dmA, Temperature: %dC\r\n",
|
|
bq27220_get_voltage(&furi_hal_i2c_handle_power),
|
|
bq27220_get_current(&furi_hal_i2c_handle_power),
|
|
(int)furi_hal_power_get_battery_temperature_internal(FuriHalPowerICFuelGauge));
|
|
}
|
|
|
|
printf(
|
|
"bq25896: VBUS: %d, VSYS: %d, VBAT: %d, Current: %d, NTC: %ldm%%\r\n",
|
|
bq25896_get_vbus_voltage(&furi_hal_i2c_handle_power),
|
|
bq25896_get_vsys_voltage(&furi_hal_i2c_handle_power),
|
|
bq25896_get_vbat_voltage(&furi_hal_i2c_handle_power),
|
|
bq25896_get_vbat_current(&furi_hal_i2c_handle_power),
|
|
bq25896_get_ntc_mpct(&furi_hal_i2c_handle_power));
|
|
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
|
|
void furi_hal_power_enable_external_3_3v() {
|
|
LL_GPIO_SetOutputPin(PERIPH_POWER_GPIO_Port, PERIPH_POWER_Pin);
|
|
}
|
|
|
|
void furi_hal_power_disable_external_3_3v() {
|
|
LL_GPIO_ResetOutputPin(PERIPH_POWER_GPIO_Port, PERIPH_POWER_Pin);
|
|
}
|
|
|
|
void furi_hal_power_suppress_charge_enter() {
|
|
vTaskSuspendAll();
|
|
bool disable_charging = furi_hal_power.suppress_charge == 0;
|
|
furi_hal_power.suppress_charge++;
|
|
xTaskResumeAll();
|
|
|
|
if(disable_charging) {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bq25896_disable_charging(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
}
|
|
|
|
void furi_hal_power_suppress_charge_exit() {
|
|
vTaskSuspendAll();
|
|
furi_hal_power.suppress_charge--;
|
|
bool enable_charging = furi_hal_power.suppress_charge == 0;
|
|
xTaskResumeAll();
|
|
|
|
if(enable_charging) {
|
|
furi_hal_i2c_acquire(&furi_hal_i2c_handle_power);
|
|
bq25896_enable_charging(&furi_hal_i2c_handle_power);
|
|
furi_hal_i2c_release(&furi_hal_i2c_handle_power);
|
|
}
|
|
}
|