mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-15 00:33:05 +03:00
8073992925
* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
153 lines
3.9 KiB
C
153 lines
3.9 KiB
C
#include <furi-hal-i2c.h>
|
|
#include <furi-hal-version.h>
|
|
|
|
#include <stm32wbxx_ll_i2c.h>
|
|
#include <stm32wbxx_ll_gpio.h>
|
|
#include <stm32wbxx_ll_cortex.h>
|
|
#include <furi.h>
|
|
|
|
osMutexId_t furi_hal_i2c_mutex = NULL;
|
|
|
|
void furi_hal_i2c_init() {
|
|
furi_hal_i2c_mutex = osMutexNew(NULL);
|
|
furi_check(furi_hal_i2c_mutex);
|
|
|
|
LL_I2C_InitTypeDef I2C_InitStruct = {0};
|
|
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_PCLK1);
|
|
|
|
GPIO_InitStruct.Pin = POWER_I2C_SCL_Pin | POWER_I2C_SDA_Pin;
|
|
GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
|
|
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN;
|
|
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
|
|
GPIO_InitStruct.Alternate = LL_GPIO_AF_4;
|
|
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
I2C_InitStruct.PeripheralMode = LL_I2C_MODE_I2C;
|
|
I2C_InitStruct.AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE;
|
|
I2C_InitStruct.DigitalFilter = 0;
|
|
I2C_InitStruct.OwnAddress1 = 0;
|
|
I2C_InitStruct.TypeAcknowledge = LL_I2C_ACK;
|
|
I2C_InitStruct.OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
|
|
if (furi_hal_version_get_hw_version() > 10) {
|
|
I2C_InitStruct.Timing = POWER_I2C_TIMINGS_400;
|
|
} else {
|
|
I2C_InitStruct.Timing = POWER_I2C_TIMINGS_100;
|
|
}
|
|
LL_I2C_Init(POWER_I2C, &I2C_InitStruct);
|
|
LL_I2C_EnableAutoEndMode(POWER_I2C);
|
|
LL_I2C_SetOwnAddress2(POWER_I2C, 0, LL_I2C_OWNADDRESS2_NOMASK);
|
|
LL_I2C_DisableOwnAddress2(POWER_I2C);
|
|
LL_I2C_DisableGeneralCall(POWER_I2C);
|
|
LL_I2C_EnableClockStretching(POWER_I2C);
|
|
FURI_LOG_I("FuriHalI2C", "Init OK");
|
|
}
|
|
|
|
bool furi_hal_i2c_tx(
|
|
I2C_TypeDef* instance,
|
|
uint8_t address,
|
|
const uint8_t* data,
|
|
uint8_t size,
|
|
uint32_t timeout) {
|
|
uint32_t time_left = timeout;
|
|
bool ret = true;
|
|
|
|
while(LL_I2C_IsActiveFlag_BUSY(instance))
|
|
;
|
|
|
|
LL_I2C_HandleTransfer(
|
|
instance,
|
|
address,
|
|
LL_I2C_ADDRSLAVE_7BIT,
|
|
size,
|
|
LL_I2C_MODE_AUTOEND,
|
|
LL_I2C_GENERATE_START_WRITE);
|
|
|
|
while(!LL_I2C_IsActiveFlag_STOP(instance) || size > 0) {
|
|
if(LL_I2C_IsActiveFlag_TXIS(instance)) {
|
|
LL_I2C_TransmitData8(instance, (*data));
|
|
data++;
|
|
size--;
|
|
time_left = timeout;
|
|
}
|
|
|
|
if(LL_SYSTICK_IsActiveCounterFlag()) {
|
|
if(--time_left == 0) {
|
|
ret = false;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
LL_I2C_ClearFlag_STOP(instance);
|
|
|
|
return ret;
|
|
}
|
|
|
|
bool furi_hal_i2c_rx(
|
|
I2C_TypeDef* instance,
|
|
uint8_t address,
|
|
uint8_t* data,
|
|
uint8_t size,
|
|
uint32_t timeout) {
|
|
uint32_t time_left = timeout;
|
|
bool ret = true;
|
|
|
|
while(LL_I2C_IsActiveFlag_BUSY(instance))
|
|
;
|
|
|
|
LL_I2C_HandleTransfer(
|
|
instance,
|
|
address,
|
|
LL_I2C_ADDRSLAVE_7BIT,
|
|
size,
|
|
LL_I2C_MODE_AUTOEND,
|
|
LL_I2C_GENERATE_START_READ);
|
|
|
|
while(!LL_I2C_IsActiveFlag_STOP(instance) || size > 0) {
|
|
if(LL_I2C_IsActiveFlag_RXNE(instance)) {
|
|
*data = LL_I2C_ReceiveData8(instance);
|
|
data++;
|
|
size--;
|
|
time_left = timeout;
|
|
}
|
|
|
|
if(LL_SYSTICK_IsActiveCounterFlag()) {
|
|
if(--time_left == 0) {
|
|
ret = false;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
LL_I2C_ClearFlag_STOP(instance);
|
|
|
|
return ret;
|
|
}
|
|
|
|
bool furi_hal_i2c_trx(
|
|
I2C_TypeDef* instance,
|
|
uint8_t address,
|
|
const uint8_t* tx_data,
|
|
uint8_t tx_size,
|
|
uint8_t* rx_data,
|
|
uint8_t rx_size,
|
|
uint32_t timeout) {
|
|
if(furi_hal_i2c_tx(instance, address, tx_data, tx_size, timeout) &&
|
|
furi_hal_i2c_rx(instance, address, rx_data, rx_size, timeout)) {
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
void furi_hal_i2c_lock() {
|
|
furi_check(osMutexAcquire(furi_hal_i2c_mutex, osWaitForever) == osOK);
|
|
}
|
|
|
|
void furi_hal_i2c_unlock() {
|
|
furi_check(osMutexRelease(furi_hal_i2c_mutex) == osOK);
|
|
}
|