unleashed-firmware/lib/drivers/bq27220_reg.h
あく 76e97b8d35
[FL-3051] Gauge initialization routine refactoring, new DataMemory layout, configuration update ()
* FuriHal: refactor power gauge config

* Format sources and move gauge DM load to separate method

* FuriHal: bq27220 refactoring part 1

* Power: use SYSDWN battery status flag for system shutdown

* Libs: bq27220 read DM before write, fix incorrect shift

* FuriHal: cleanup gauge config, add flags, add ptr DM type, update symbols

* FuriHal: 2 stage gauge DM verification and update, better detection routine

* FuriHal: update gauge configuration, lower sleep current and deadband

* FuriHal: gauge and charger health reporting

* Lib: cleanup bq27220 sources

* FuriHal: correct documentation for furi_hal_power_is_shutdown_requested

* FuriHal: proper gauge config for f7
2023-07-18 14:46:38 +04:00

69 lines
2.2 KiB
C

#pragma once
#define BQ27220_ADDRESS 0xAA
#define BQ27220_I2C_TIMEOUT 50
#define CommandControl 0x00
#define CommandAtRate 0x02
#define CommandAtRateTimeToEmpty 0x04
#define CommandTemperature 0x06
#define CommandVoltage 0x08
#define CommandBatteryStatus 0x0A
#define CommandCurrent 0x0C
#define CommandRemainingCapacity 0x10
#define CommandFullChargeCapacity 0x12
#define CommandAverageCurrent 0x14
#define CommandTimeToEmpty 0x16
#define CommandTimeToFull 0x18
#define CommandStandbyCurrent 0x1A
#define CommandStandbyTimeToEmpty 0x1C
#define CommandMaxLoadCurrent 0x1E
#define CommandMaxLoadTimeToEmpty 0x20
#define CommandRawCoulombCount 0x22
#define CommandAveragePower 0x24
#define CommandInternalTemperature 0x28
#define CommandCycleCount 0x2A
#define CommandStateOfCharge 0x2C
#define CommandStateOfHealth 0x2E
#define CommandChargeVoltage 0x30
#define CommandChargeCurrent 0x32
#define CommandBTPDischargeSet 0x34
#define CommandBTPChargeSet 0x36
#define CommandOperationStatus 0x3A
#define CommandDesignCapacity 0x3C
#define CommandSelectSubclass 0x3E
#define CommandMACData 0x40
#define CommandMACDataSum 0x60
#define CommandMACDataLen 0x61
#define CommandAnalogCount 0x79
#define CommandRawCurrent 0x7A
#define CommandRawVoltage 0x7C
#define CommandRawIntTemp 0x7E
#define Control_CONTROL_STATUS 0x0000
#define Control_DEVICE_NUMBER 0x0001
#define Control_FW_VERSION 0x0002
#define Control_BOARD_OFFSET 0x0009
#define Control_CC_OFFSET 0x000A
#define Control_CC_OFFSET_SAVE 0x000B
#define Control_OCV_CMD 0x000C
#define Control_BAT_INSERT 0x000D
#define Control_BAT_REMOVE 0x000E
#define Control_SET_SNOOZE 0x0013
#define Control_CLEAR_SNOOZE 0x0014
#define Control_SET_PROFILE_1 0x0015
#define Control_SET_PROFILE_2 0x0016
#define Control_SET_PROFILE_3 0x0017
#define Control_SET_PROFILE_4 0x0018
#define Control_SET_PROFILE_5 0x0019
#define Control_SET_PROFILE_6 0x001A
#define Control_CAL_TOGGLE 0x002D
#define Control_SEALED 0x0030
#define Control_RESET 0x0041
#define Control_EXIT_CAL 0x0080
#define Control_ENTER_CAL 0x0081
#define Control_ENTER_CFG_UPDATE 0x0090
#define Control_EXIT_CFG_UPDATE_REINIT 0x0091
#define Control_EXIT_CFG_UPDATE 0x0092
#define Control_RETURN_TO_ROM 0x0F00