mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-21 20:31:32 +03:00
2f3ea9494e
* gpio, hsem, crypto: switch from HAL to LL/registers * Moved GPIO initialization to furi_hal * More HAL removed * All HAL modules disabled * HAL is finally removed * hal_gpio -> furi_hal_gpio, main.h removed * Bootloader build fix * RTOS config moved to freertos-glue * delay -> furi_hal_delay Co-authored-by: あく <alleteam@gmail.com>
70 lines
2.2 KiB
C
70 lines
2.2 KiB
C
#pragma once
|
|
|
|
#include <stm32wbxx_ll_lptim.h>
|
|
#include <stm32wbxx_ll_bus.h>
|
|
#include <stm32wbxx_ll_rcc.h>
|
|
#include <stdint.h>
|
|
|
|
// Timer used for system ticks
|
|
#define FURI_HAL_OS_TIMER_MAX 0xFFFF
|
|
#define FURI_HAL_OS_TIMER_REG_LOAD_DLY 0x1
|
|
#define FURI_HAL_OS_TIMER LPTIM2
|
|
#define FURI_HAL_OS_TIMER_IRQ LPTIM2_IRQn
|
|
|
|
static inline void furi_hal_os_timer_init() {
|
|
// Configure clock source
|
|
LL_RCC_SetLPTIMClockSource(LL_RCC_LPTIM2_CLKSOURCE_LSE);
|
|
// Set interrupt priority and enable them
|
|
NVIC_SetPriority(
|
|
FURI_HAL_OS_TIMER_IRQ, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 15, 0));
|
|
NVIC_EnableIRQ(FURI_HAL_OS_TIMER_IRQ);
|
|
}
|
|
|
|
static inline void furi_hal_os_timer_continuous(uint32_t count) {
|
|
count--;
|
|
// Enable timer
|
|
LL_LPTIM_Enable(FURI_HAL_OS_TIMER);
|
|
while(!LL_LPTIM_IsEnabled(FURI_HAL_OS_TIMER))
|
|
;
|
|
|
|
// Enable rutoreload match interrupt
|
|
LL_LPTIM_EnableIT_ARRM(FURI_HAL_OS_TIMER);
|
|
|
|
// Set autoreload and start counter
|
|
LL_LPTIM_SetAutoReload(FURI_HAL_OS_TIMER, count);
|
|
LL_LPTIM_StartCounter(FURI_HAL_OS_TIMER, LL_LPTIM_OPERATING_MODE_CONTINUOUS);
|
|
}
|
|
|
|
static inline void furi_hal_os_timer_single(uint32_t count) {
|
|
count--;
|
|
// Enable timer
|
|
LL_LPTIM_Enable(FURI_HAL_OS_TIMER);
|
|
while(!LL_LPTIM_IsEnabled(FURI_HAL_OS_TIMER))
|
|
;
|
|
|
|
// Enable compare match interrupt
|
|
LL_LPTIM_EnableIT_CMPM(FURI_HAL_OS_TIMER);
|
|
|
|
// Set compare, autoreload and start counter
|
|
// Include some marging to workaround ARRM behaviour
|
|
LL_LPTIM_SetCompare(FURI_HAL_OS_TIMER, count - 3);
|
|
LL_LPTIM_SetAutoReload(FURI_HAL_OS_TIMER, count);
|
|
LL_LPTIM_StartCounter(FURI_HAL_OS_TIMER, LL_LPTIM_OPERATING_MODE_ONESHOT);
|
|
}
|
|
|
|
static inline void furi_hal_os_timer_reset() {
|
|
// Hard reset timer
|
|
// THE ONLY RELIABLEWAY to stop it according to errata
|
|
LL_LPTIM_DeInit(FURI_HAL_OS_TIMER);
|
|
}
|
|
|
|
static inline uint32_t furi_hal_os_timer_get_cnt() {
|
|
uint32_t counter = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
|
|
uint32_t counter_shadow = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
|
|
while(counter != counter_shadow) {
|
|
counter = counter_shadow;
|
|
counter_shadow = LL_LPTIM_GetCounter(FURI_HAL_OS_TIMER);
|
|
}
|
|
return counter;
|
|
}
|