unleashed-firmware/firmware/targets/f6/fatfs/stm32_adafruit_sd.h
Anna Prosvetova 558fa5670b
RPC: Add Virtual Display & Unify log tags (#814)
* RPC: Update protobuf sources
* RPC: Add Virtual Display
* Unify log tags
* RPC: Virtual Display placeholder
* Rpc: clear frame buffer callback before confirm.
* Firmware: full assert for hal, move fatfs initialization to furi hal.
* FuriHal: VCP optimizations, thread safe console. Rpc: adjust buffer sizes.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-12 16:04:35 +03:00

253 lines
8.1 KiB
C

/**
******************************************************************************
* @file stm32_adafruit_sd.h
* @author MCD Application Team
* @version V3.0.0
* @date 23-December-2016
* @brief This file contains the common defines and functions prototypes for
* the stm32_adafruit_sd.c driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32_ADAFRUIT_SD_H
#define __STM32_ADAFRUIT_SD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
#include <stdbool.h>
/** @addtogroup BSP
* @{
*/
#define __IO volatile
/** @addtogroup STM32_ADAFRUIT
* @{
*/
/** @defgroup STM32_ADAFRUIT_SD
* @{
*/
/** @defgroup STM32_ADAFRUIT_SD_Exported_Types
* @{
*/
/**
* @brief SD status structure definition
*/
enum {
BSP_SD_OK = 0x00,
MSD_OK = 0x00,
BSP_SD_ERROR = 0x01,
BSP_SD_TIMEOUT
};
typedef struct
{
uint8_t Reserved1:2; /* Reserved */
uint16_t DeviceSize:12; /* Device Size */
uint8_t MaxRdCurrentVDDMin:3; /* Max. read current @ VDD min */
uint8_t MaxRdCurrentVDDMax:3; /* Max. read current @ VDD max */
uint8_t MaxWrCurrentVDDMin:3; /* Max. write current @ VDD min */
uint8_t MaxWrCurrentVDDMax:3; /* Max. write current @ VDD max */
uint8_t DeviceSizeMul:3; /* Device size multiplier */
} struct_v1;
typedef struct
{
uint8_t Reserved1:6; /* Reserved */
uint32_t DeviceSize:22; /* Device Size */
uint8_t Reserved2:1; /* Reserved */
} struct_v2;
/**
* @brief Card Specific Data: CSD Register
*/
typedef struct
{
/* Header part */
uint8_t CSDStruct:2; /* CSD structure */
uint8_t Reserved1:6; /* Reserved */
uint8_t TAAC:8; /* Data read access-time 1 */
uint8_t NSAC:8; /* Data read access-time 2 in CLK cycles */
uint8_t MaxBusClkFrec:8; /* Max. bus clock frequency */
uint16_t CardComdClasses:12; /* Card command classes */
uint8_t RdBlockLen:4; /* Max. read data block length */
uint8_t PartBlockRead:1; /* Partial blocks for read allowed */
uint8_t WrBlockMisalign:1; /* Write block misalignment */
uint8_t RdBlockMisalign:1; /* Read block misalignment */
uint8_t DSRImpl:1; /* DSR implemented */
/* v1 or v2 struct */
union csd_version {
struct_v1 v1;
struct_v2 v2;
} version;
uint8_t EraseSingleBlockEnable:1; /* Erase single block enable */
uint8_t EraseSectorSize:7; /* Erase group size multiplier */
uint8_t WrProtectGrSize:7; /* Write protect group size */
uint8_t WrProtectGrEnable:1; /* Write protect group enable */
uint8_t Reserved2:2; /* Reserved */
uint8_t WrSpeedFact:3; /* Write speed factor */
uint8_t MaxWrBlockLen:4; /* Max. write data block length */
uint8_t WriteBlockPartial:1; /* Partial blocks for write allowed */
uint8_t Reserved3:5; /* Reserved */
uint8_t FileFormatGrouop:1; /* File format group */
uint8_t CopyFlag:1; /* Copy flag (OTP) */
uint8_t PermWrProtect:1; /* Permanent write protection */
uint8_t TempWrProtect:1; /* Temporary write protection */
uint8_t FileFormat:2; /* File Format */
uint8_t Reserved4:2; /* Reserved */
uint8_t crc:7; /* Reserved */
uint8_t Reserved5:1; /* always 1*/
} SD_CSD;
/**
* @brief Card Identification Data: CID Register
*/
typedef struct
{
__IO uint8_t ManufacturerID; /* ManufacturerID */
__IO uint16_t OEM_AppliID; /* OEM/Application ID */
__IO uint32_t ProdName1; /* Product Name part1 */
__IO uint8_t ProdName2; /* Product Name part2*/
__IO uint8_t ProdRev; /* Product Revision */
__IO uint32_t ProdSN; /* Product Serial Number */
__IO uint8_t Reserved1; /* Reserved1 */
__IO uint16_t ManufactDate; /* Manufacturing Date */
__IO uint8_t CID_CRC; /* CID CRC */
__IO uint8_t Reserved2; /* always 1 */
} SD_CID;
/**
* @brief SD Card information
*/
typedef struct
{
SD_CSD Csd;
SD_CID Cid;
uint64_t CardCapacity; /*!< Card Capacity */
uint32_t CardBlockSize; /*!< Card Block Size */
uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
} SD_CardInfo;
/**
* @}
*/
/** @defgroup STM32_ADAFRUIT_SPI_SD_Exported_Constants
* @{
*/
/**
* @brief Block Size
*/
#define SD_BLOCK_SIZE 0x200
/**
* @brief SD detection on its memory slot
*/
#define SD_PRESENT ((uint8_t)0x01)
#define SD_NOT_PRESENT ((uint8_t)0x00)
#define SD_DATATIMEOUT ((uint32_t)100000000)
/**
* @brief SD Card information structure
*/
#define BSP_SD_CardInfo SD_CardInfo
/**
* @}
*/
/** @defgroup STM32_ADAFRUIT_SD_Exported_Macro
* @{
*/
/**
* @}
*/
/** @defgroup STM32_ADAFRUIT_SD_Exported_Functions
* @{
*/
uint8_t BSP_SD_Init(bool reset_card);
uint8_t BSP_SD_ReadBlocks(uint32_t *pData, uint32_t ReadAddr, uint32_t NumOfBlocks, uint32_t Timeout);
uint8_t BSP_SD_WriteBlocks(uint32_t *pData, uint32_t WriteAddr, uint32_t NumOfBlocks, uint32_t Timeout);
uint8_t BSP_SD_Erase(uint32_t StartAddr, uint32_t EndAddr);
uint8_t BSP_SD_GetCardState(void);
uint8_t BSP_SD_GetCardInfo(SD_CardInfo *pCardInfo);
/* Link functions for SD Card peripheral*/
void SD_SPI_Slow_Init(void);
void SD_SPI_Fast_Init(void);
void SD_IO_Init(void);
void SD_IO_CSState(uint8_t state);
void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength);
uint8_t SD_IO_WriteByte(uint8_t Data);
/* Link function for HAL delay */
void HAL_Delay(__IO uint32_t Delay);
#ifdef __cplusplus
}
#endif
#endif /* __STM32_ADAFRUIT_SD_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/