unleashed-firmware/firmware/targets/f7/furi_hal/furi_hal_spi_config.h
2023-06-18 20:25:40 +03:00

62 lines
1.7 KiB
C

#pragma once
#include <furi_hal_spi_types.h>
#ifdef __cplusplus
extern "C" {
#endif
/** Preset for ST25R916 */
extern const LL_SPI_InitTypeDef furi_hal_spi_preset_2edge_low_8m;
/** Preset for CC1101 */
extern const LL_SPI_InitTypeDef furi_hal_spi_preset_1edge_low_8m;
/** Preset for ST7567 (Display) */
extern const LL_SPI_InitTypeDef furi_hal_spi_preset_1edge_low_4m;
/** Preset for SdCard in fast mode */
extern const LL_SPI_InitTypeDef furi_hal_spi_preset_1edge_low_16m;
/** Preset for SdCard in slow mode */
extern const LL_SPI_InitTypeDef furi_hal_spi_preset_1edge_low_2m;
/** Furi Hal Spi Bus R (Radio: CC1101, Nfc, External)*/
extern FuriHalSpiBus furi_hal_spi_bus_r;
/** Furi Hal Spi Bus D (Display, SdCard) */
extern FuriHalSpiBus furi_hal_spi_bus_d;
/** CC1101 on `furi_hal_spi_bus_r` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_subghz;
/** ST25R3916 on `furi_hal_spi_bus_r` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_nfc;
/** External on `furi_hal_spi_bus_r`
* Preset: `furi_hal_spi_preset_1edge_low_2m`
*
* miso: pa6
* mosi: pa7
* sck: pb3
* cs: pa4 (software controlled)
*
* @warning not initialized by default, call `furi_hal_spi_bus_handle_init` to initialize
* Bus pins are floating on inactive state, CS high after initialization
*
*/
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_external;
/** ST7567(Display) on `furi_hal_spi_bus_d` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_display;
/** SdCard in fast mode on `furi_hal_spi_bus_d` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_sd_fast;
/** SdCard in slow mode on `furi_hal_spi_bus_d` */
extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_sd_slow;
#ifdef __cplusplus
}
#endif