unleashed-firmware/firmware/targets/f6/furi-hal/furi-hal-resources.c
あく cf591ef7eb
[FL-1911] FuriHal: i2c refactoring (#847)
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
2021-11-28 21:28:19 +03:00

60 lines
3.3 KiB
C

#include <furi-hal-resources.h>
#include "main.h"
#include <furi.h>
const InputPin input_pins[] = {
{.port = BUTTON_UP_GPIO_Port, .pin = BUTTON_UP_Pin, .key = InputKeyUp, .inverted = true, .name="Up"},
{.port = BUTTON_DOWN_GPIO_Port, .pin = BUTTON_DOWN_Pin, .key = InputKeyDown, .inverted = true, .name="Down"},
{.port = BUTTON_RIGHT_GPIO_Port,
.pin = BUTTON_RIGHT_Pin,
.key = InputKeyRight,
.inverted = true, .name="Right"},
{.port = BUTTON_LEFT_GPIO_Port, .pin = BUTTON_LEFT_Pin, .key = InputKeyLeft, .inverted = true, .name="Left"},
{.port = BUTTON_OK_GPIO_Port, .pin = BUTTON_OK_Pin, .key = InputKeyOk, .inverted = false, .name="Ok"},
{.port = BUTTON_BACK_GPIO_Port, .pin = BUTTON_BACK_Pin, .key = InputKeyBack, .inverted = true, .name="Back"},
};
const size_t input_pins_count = sizeof(input_pins) / sizeof(InputPin);
const GpioPin vibro_gpio = {.port = VIBRO_GPIO_Port, .pin = VIBRO_Pin};
const GpioPin ibutton_gpio = {.port = iBTN_GPIO_Port, .pin = iBTN_Pin};
const GpioPin gpio_cc1101_g0 = {.port = CC1101_G0_GPIO_Port, .pin = CC1101_G0_Pin};
const GpioPin gpio_rf_sw_0 = {.port = RF_SW_0_GPIO_Port, .pin = RF_SW_0_Pin};
const GpioPin gpio_subghz_cs = {.port = CC1101_CS_GPIO_Port, .pin = CC1101_CS_Pin};
const GpioPin gpio_display_cs = {.port = DISPLAY_CS_GPIO_Port, .pin = DISPLAY_CS_Pin};
const GpioPin gpio_display_rst = {.port = DISPLAY_RST_GPIO_Port, .pin = DISPLAY_RST_Pin};
const GpioPin gpio_display_di = {.port = DISPLAY_DI_GPIO_Port, .pin = DISPLAY_DI_Pin};
const GpioPin gpio_sdcard_cs = {.port = SD_CS_GPIO_Port, .pin = SD_CS_Pin};
const GpioPin gpio_nfc_cs = {.port = NFC_CS_GPIO_Port, .pin = NFC_CS_Pin};
const GpioPin gpio_spi_d_miso = {.port = SPI_D_MISO_GPIO_Port, .pin = SPI_D_MISO_Pin};
const GpioPin gpio_spi_d_mosi = {.port = SPI_D_MOSI_GPIO_Port, .pin = SPI_D_MOSI_Pin};
const GpioPin gpio_spi_d_sck = {.port = SPI_D_SCK_GPIO_Port, .pin = SPI_D_SCK_Pin};
const GpioPin gpio_spi_r_miso = {.port = SPI_R_MISO_GPIO_Port, .pin = SPI_R_MISO_Pin};
const GpioPin gpio_spi_r_mosi = {.port = SPI_R_MOSI_GPIO_Port, .pin = SPI_R_MOSI_Pin};
const GpioPin gpio_spi_r_sck = {.port = SPI_R_SCK_GPIO_Port, .pin = SPI_R_SCK_Pin};
const GpioPin gpio_ext_pc0 = {.port = GPIOC, .pin = GPIO_PIN_0};
const GpioPin gpio_ext_pc1 = {.port = GPIOC, .pin = GPIO_PIN_1};
const GpioPin gpio_ext_pc3 = {.port = GPIOC, .pin = GPIO_PIN_3};
const GpioPin gpio_ext_pb2 = {.port = GPIOB, .pin = GPIO_PIN_2};
const GpioPin gpio_ext_pb3 = {.port = GPIOB, .pin = GPIO_PIN_3};
const GpioPin gpio_ext_pa4 = {.port = GPIOA, .pin = GPIO_PIN_4};
const GpioPin gpio_ext_pa6 = {.port = GPIOA, .pin = GPIO_PIN_6};
const GpioPin gpio_ext_pa7 = {.port = GPIOA, .pin = GPIO_PIN_7};
const GpioPin gpio_rfid_pull = {.port = RFID_PULL_GPIO_Port, .pin = RFID_PULL_Pin};
const GpioPin gpio_rfid_carrier_out = {.port = RFID_OUT_GPIO_Port, .pin = RFID_OUT_Pin};
const GpioPin gpio_rfid_data_in = {.port = RFID_RF_IN_GPIO_Port, .pin = RFID_RF_IN_Pin};
const GpioPin gpio_irda_rx = {.port = IR_RX_GPIO_Port, .pin = IR_RX_Pin};
const GpioPin gpio_irda_tx = {.port = IR_TX_GPIO_Port, .pin = IR_TX_Pin};
const GpioPin gpio_usart_tx = {.port = USART1_TX_Port, .pin = USART1_TX_Pin};
const GpioPin gpio_usart_rx = {.port = USART1_RX_Port, .pin = USART1_RX_Pin};
const GpioPin gpio_i2c_power_sda = {.port = GPIOA, .pin = LL_GPIO_PIN_10};
const GpioPin gpio_i2c_power_scl = {.port = GPIOA, .pin = LL_GPIO_PIN_9};