unleashed-firmware/bootloader/targets/f6/target.mk

51 lines
1.9 KiB
Makefile

TOOLCHAIN = arm
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08008000
OS_OFFSET = 0x00008000
FLASH_ADDRESS = 0x08000000
OPENOCD_OPTS = -f interface/stlink.cfg -c "transport select hla_swd" -f ../debug/stm32wbx.cfg -c "init"
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32WB55xx -Wall -fdata-sections -ffunction-sections
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs
HARDWARE_TARGET = 6
CUBE_DIR = $(PROJECT_ROOT)/lib/STM32CubeWB
# ST HAL
CFLAGS += -DUSE_FULL_LL_DRIVER
ASM_SOURCES += $(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/gcc/startup_stm32wb55xx_cm4.s
C_SOURCES += $(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Source/Templates/system_stm32wbxx.c
C_SOURCES += $(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c
C_SOURCES += $(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c
C_SOURCES += $(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c
C_SOURCES += $(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c
CFLAGS += -I$(CUBE_DIR)/Drivers/CMSIS/Include
CFLAGS += -I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include
CFLAGS += -I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc
LDFLAGS += -T$(TARGET_DIR)/stm32wb55xx_flash_cm4.ld
# Drivers
DRIVERS_DIR = $(PROJECT_ROOT)//lib/drivers
CFLAGS += -I$(DRIVERS_DIR)
C_SOURCES += $(DRIVERS_DIR)/lp5562.c
# API-HAL
CFLAGS += -I$(TARGET_DIR)/furi-hal
C_SOURCES += $(wildcard $(TARGET_DIR)/furi-hal/*.c)
# Version generation
C_SOURCES += $(PROJECT_ROOT)/lib/toolbox/version.c
ASM_SOURCES += $(wildcard $(TARGET_DIR)/*.s)
C_SOURCES += $(wildcard $(TARGET_DIR)/*.c)
CPP_SOURCES += $(wildcard $(TARGET_DIR)/*.cpp)
SVD_FILE = $(PROJECT_ROOT)/debug/STM32WB55_CM4.svd