unleashed-firmware/lib/ST25RFAL002/include/rfal_t2t.h
あく 389ff92cc1
Naming and coding style convention, new linter tool. ()
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00

151 lines
4.7 KiB
C

/******************************************************************************
* \attention
*
* <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
*
* Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* www.st.com/myliberty
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
* AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/*
* PROJECT: ST25R391x firmware
* Revision:
* LANGUAGE: ISO C99
*/
/*! \file rfal_t2t.h
*
* \author Gustavo Patricio
*
* \brief Provides NFC-A T2T convenience methods and definitions
*
* This module provides an interface to perform as a NFC-A Reader/Writer
* to handle a Type 2 Tag T2T
*
*
* \addtogroup RFAL
* @{
*
* \addtogroup RFAL-AL
* \brief RFAL Abstraction Layer
* @{
*
* \addtogroup T2T
* \brief RFAL T2T Module
* @{
*
*/
#ifndef RFAL_T2T_H
#define RFAL_T2T_H
/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "platform.h"
#include "st_errno.h"
#include "rfal_rf.h"
/*
******************************************************************************
* GLOBAL DEFINES
******************************************************************************
*/
#define RFAL_T2T_BLOCK_LEN 4U /*!< T2T block length */
#define RFAL_T2T_READ_DATA_LEN (4U * RFAL_T2T_BLOCK_LEN) /*!< T2T READ data length */
#define RFAL_T2T_WRITE_DATA_LEN RFAL_T2T_BLOCK_LEN /*!< T2T WRITE data length */
/*
******************************************************************************
* GLOBAL TYPES
******************************************************************************
*/
/*
******************************************************************************
* GLOBAL FUNCTION PROTOTYPES
******************************************************************************
*/
/*!
*****************************************************************************
* \brief NFC-A T2T Poller Read
*
* This method sends a Read command to a NFC-A T2T Listener device
*
*
* \param[in] blockNum : Number of the block to read
* \param[out] rxBuf : pointer to place the read data
* \param[in] rxBufLen : size of rxBuf (RFAL_T2T_READ_DATA_LEN)
* \param[out] rcvLen : actual received data
*
* \return ERR_WRONG_STATE : RFAL not initialized or mode not set
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode
rfalT2TPollerRead(uint8_t blockNum, uint8_t* rxBuf, uint16_t rxBufLen, uint16_t* rcvLen);
/*!
*****************************************************************************
* \brief NFC-A T2T Poller Write
*
* This method sends a Write command to a NFC-A T2T Listener device
*
*
* \param[in] blockNum : Number of the block to write
* \param[in] wrData : data to be written on the given block
* size must be of RFAL_T2T_WRITE_DATA_LEN
*
* \return ERR_WRONG_STATE : RFAL not initialized or mode not set
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT2TPollerWrite(uint8_t blockNum, const uint8_t* wrData);
/*!
*****************************************************************************
* \brief NFC-A T2T Poller Sector Select
*
* This method sends a Sector Select commands to a NFC-A T2T Listener device
*
* \param[in] sectorNum : Sector Number
*
* \return ERR_WRONG_STATE : RFAL not initialized or mode not set
* \return ERR_PARAM : Invalid parameter
* \return ERR_PROTO : Protocol error
* \return ERR_NONE : No error
*****************************************************************************
*/
ReturnCode rfalT2TPollerSectorSelect(uint8_t sectorNum);
#endif /* RFAL_T2T_H */
/**
* @}
*
* @}
*
* @}
*/