mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-11-24 11:14:26 +03:00
37005 lines
1.5 MiB
Executable File
37005 lines
1.5 MiB
Executable File
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!--
|
|
Copyright (c) 2020 STMicroelectronics.
|
|
|
|
SPDX-License-Identifier: Apache-2.0
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
-->
|
|
<device xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="1.1" xs:noNamespaceSchemaLocation="CMSIS-SVD_Schema_1_1.xsd">
|
|
<name>STM32WB55_CM4</name>
|
|
<version>1.8</version>
|
|
<description>STM32WB55_CM4</description>
|
|
<cpu>
|
|
<name>CM4</name>
|
|
<revision>r0p1</revision>
|
|
<endian>little</endian>
|
|
<mpuPresent>true</mpuPresent>
|
|
<fpuPresent>true</fpuPresent>
|
|
<nvicPrioBits>4</nvicPrioBits>
|
|
<vendorSystickConfig>false</vendorSystickConfig>
|
|
</cpu>
|
|
<!--Bus Interface Properties-->
|
|
<!--Cortex-M3 is byte addressable-->
|
|
<addressUnitBits>8</addressUnitBits>
|
|
<!--the maximum data bit width accessible within a single transfer-->
|
|
<width>32</width>
|
|
<!--Register Default Properties-->
|
|
<size>0x20</size>
|
|
<resetValue>0x0</resetValue>
|
|
<resetMask>0xFFFFFFFF</resetMask>
|
|
<peripherals>
|
|
<peripheral>
|
|
<name>DMA1</name>
|
|
<description>Direct memory access controller</description>
|
|
<groupName>DMA</groupName>
|
|
<baseAddress>0x40020000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>DMA1_Channel1</name>
|
|
<description>DMA1 Channel1 global interrupt</description>
|
|
<value>11</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA1_Channel2</name>
|
|
<description>DMA1 Channel2 global interrupt</description>
|
|
<value>12</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA1_Channel3</name>
|
|
<description>DMA1 Channel3 interrupt</description>
|
|
<value>13</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA1_Channel4</name>
|
|
<description>DMA1 Channel4 interrupt</description>
|
|
<value>14</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA1_Channel5</name>
|
|
<description>DMA1 Channel5 interrupt</description>
|
|
<value>15</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA1_Channel6</name>
|
|
<description>DMA1 Channel6 interrupt</description>
|
|
<value>16</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA1_Channel7</name>
|
|
<description>DMA1 Channel 7 interrupt</description>
|
|
<value>17</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>interrupt status register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TEIF7</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF7</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF7</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF7</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF6</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF6</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF6</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF6</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF5</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF5</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF5</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF5</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF4</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF4</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF4</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF4</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF3</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF3</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF3</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF3</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF2</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF2</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF2</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF2</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF1</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF1</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF1</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF1</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IFCR</name>
|
|
<displayName>IFCR</displayName>
|
|
<description>interrupt flag clear register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CTEIF7</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF7</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF7</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF7</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF6</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF6</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF6</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF6</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF5</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF5</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF5</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF5</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF4</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF4</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF4</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF4</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF3</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF3</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF3</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF3</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF2</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF2</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF2</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF2</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF1</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF1</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF1</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF1</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR1</name>
|
|
<displayName>CCR1</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR1</name>
|
|
<displayName>CNDTR1</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR1</name>
|
|
<displayName>CPAR1</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR1</name>
|
|
<displayName>CMAR1</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR2</name>
|
|
<displayName>CCR2</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR2</name>
|
|
<displayName>CNDTR2</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR2</name>
|
|
<displayName>CPAR2</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR2</name>
|
|
<displayName>CMAR2</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR3</name>
|
|
<displayName>CCR3</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR3</name>
|
|
<displayName>CNDTR3</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR3</name>
|
|
<displayName>CPAR3</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR3</name>
|
|
<displayName>CMAR3</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR4</name>
|
|
<displayName>CCR4</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR4</name>
|
|
<displayName>CNDTR4</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR4</name>
|
|
<displayName>CPAR4</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR4</name>
|
|
<displayName>CMAR4</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR5</name>
|
|
<displayName>CCR5</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR5</name>
|
|
<displayName>CNDTR5</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR5</name>
|
|
<displayName>CPAR5</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR5</name>
|
|
<displayName>CMAR5</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR6</name>
|
|
<displayName>CCR6</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR6</name>
|
|
<displayName>CNDTR6</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x70</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR6</name>
|
|
<displayName>CPAR6</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x74</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR6</name>
|
|
<displayName>CMAR6</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x78</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR7</name>
|
|
<displayName>CCR7</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR7</name>
|
|
<displayName>CNDTR7</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR7</name>
|
|
<displayName>CPAR7</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR7</name>
|
|
<displayName>CMAR7</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x8C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>DMA2</name>
|
|
<description>Direct memory access controller</description>
|
|
<groupName>DMA</groupName>
|
|
<baseAddress>0x40020400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>DMA2_CH1</name>
|
|
<description>DMA2 channel 1 interrupt</description>
|
|
<value>55</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA2_CH2</name>
|
|
<description>DMA2 channel 2 interrupt</description>
|
|
<value>56</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA2_CH3</name>
|
|
<description>DMA2 channel 3 interrupt</description>
|
|
<value>57</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA2_CH4</name>
|
|
<description>DMA2 channel 4 interrupt</description>
|
|
<value>58</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA2_CH5</name>
|
|
<description>DMA2 channel 5 interrupt</description>
|
|
<value>59</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA2_CH6</name>
|
|
<description>DMA2 channel 6 interrupt</description>
|
|
<value>60</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>DMA2_CH7</name>
|
|
<description>DMA2 channel 7 interrupt</description>
|
|
<value>61</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>interrupt status register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TEIF7</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF7</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF7</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF7</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF6</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF6</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF6</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF6</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF5</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF5</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF5</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF5</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF4</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF4</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF4</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF4</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF3</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF3</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF3</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF3</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF2</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF2</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF2</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF2</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIF1</name>
|
|
<description>Channel x transfer error flag (x = 1 ..7)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIF1</name>
|
|
<description>Channel x half transfer flag (x = 1 ..7)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIF1</name>
|
|
<description>Channel x transfer complete flag (x = 1 ..7)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GIF1</name>
|
|
<description>Channel x global interrupt flag (x = 1 ..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IFCR</name>
|
|
<displayName>IFCR</displayName>
|
|
<description>interrupt flag clear register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CTEIF7</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF7</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF7</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF7</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF6</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF6</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF6</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF6</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF5</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF5</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF5</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF5</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF4</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF4</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF4</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF4</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF3</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF3</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF3</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF3</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF2</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF2</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF2</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF2</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEIF1</name>
|
|
<description>Channel x transfer error clear (x = 1 ..7)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHTIF1</name>
|
|
<description>Channel x half transfer clear (x = 1 ..7)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCIF1</name>
|
|
<description>Channel x transfer complete clear (x = 1 ..7)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CGIF1</name>
|
|
<description>Channel x global interrupt clear (x = 1 ..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR1</name>
|
|
<displayName>CCR1</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR1</name>
|
|
<displayName>CNDTR1</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR1</name>
|
|
<displayName>CPAR1</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR1</name>
|
|
<displayName>CMAR1</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR2</name>
|
|
<displayName>CCR2</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR2</name>
|
|
<displayName>CNDTR2</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR2</name>
|
|
<displayName>CPAR2</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR2</name>
|
|
<displayName>CMAR2</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR3</name>
|
|
<displayName>CCR3</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR3</name>
|
|
<displayName>CNDTR3</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR3</name>
|
|
<displayName>CPAR3</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR3</name>
|
|
<displayName>CMAR3</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR4</name>
|
|
<displayName>CCR4</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR4</name>
|
|
<displayName>CNDTR4</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR4</name>
|
|
<displayName>CPAR4</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR4</name>
|
|
<displayName>CMAR4</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR5</name>
|
|
<displayName>CCR5</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR5</name>
|
|
<displayName>CNDTR5</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR5</name>
|
|
<displayName>CPAR5</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR5</name>
|
|
<displayName>CMAR5</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR6</name>
|
|
<displayName>CCR6</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR6</name>
|
|
<displayName>CNDTR6</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x70</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR6</name>
|
|
<displayName>CPAR6</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x74</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR6</name>
|
|
<displayName>CMAR6</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x78</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR7</name>
|
|
<displayName>CCR7</displayName>
|
|
<description>channel x configuration register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM2MEM</name>
|
|
<description>Memory to memory mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PL</name>
|
|
<description>Channel priority level</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIZE</name>
|
|
<description>Memory size</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSIZE</name>
|
|
<description>Peripheral size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINC</name>
|
|
<description>Memory increment mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PINC</name>
|
|
<description>Peripheral increment mode</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CIRC</name>
|
|
<description>Circular mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Data transfer direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HTIE</name>
|
|
<description>Half transfer interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Channel enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNDTR7</name>
|
|
<displayName>CNDTR7</displayName>
|
|
<description>channel x number of data register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NDT</name>
|
|
<description>Number of data to transfer</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CPAR7</name>
|
|
<displayName>CPAR7</displayName>
|
|
<description>channel x peripheral address register</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PA</name>
|
|
<description>Peripheral address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMAR7</name>
|
|
<displayName>CMAR7</displayName>
|
|
<description>channel x memory address register</description>
|
|
<addressOffset>0x8C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MA</name>
|
|
<description>Memory address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CSELR</name>
|
|
<displayName>CSELR</displayName>
|
|
<description>channel selection register</description>
|
|
<addressOffset>0xA8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>C7S</name>
|
|
<description>DMA channel 7 selection</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C6S</name>
|
|
<description>DMA channel 6 selection</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C5S</name>
|
|
<description>DMA channel 5 selection</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C4S</name>
|
|
<description>DMA channel 4 selection</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C3S</name>
|
|
<description>DMA channel 3 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C2S</name>
|
|
<description>DMA channel 2 selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C1S</name>
|
|
<description>DMA channel 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>DMAMUX1</name>
|
|
<description>Direct memory access Multiplexer</description>
|
|
<groupName>DMAMUX</groupName>
|
|
<baseAddress>0x40020800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>DMAMUX_OVR</name>
|
|
<description>DMAMUX overrun interrupt</description>
|
|
<value>62</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>C0CR</name>
|
|
<displayName>C0CR</displayName>
|
|
<description>DMA Multiplexer Channel 0 Control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1CR</name>
|
|
<displayName>C1CR</displayName>
|
|
<description>DMA Multiplexer Channel 1 Control register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2CR</name>
|
|
<displayName>C2CR</displayName>
|
|
<description>DMA Multiplexer Channel 2 Control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C3CR</name>
|
|
<displayName>C3CR</displayName>
|
|
<description>DMA Multiplexer Channel 3 Control register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C4CR</name>
|
|
<displayName>C4CR</displayName>
|
|
<description>DMA Multiplexer Channel 4 Control register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C5CR</name>
|
|
<displayName>C5CR</displayName>
|
|
<description>DMA Multiplexer Channel 5 Control register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C6CR</name>
|
|
<displayName>C6CR</displayName>
|
|
<description>DMA Multiplexer Channel 6 Control register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C7CR</name>
|
|
<displayName>C7CR</displayName>
|
|
<description>DMA Multiplexer Channel 7 Control register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C8CR</name>
|
|
<displayName>C8CR</displayName>
|
|
<description>DMA Multiplexer Channel 8 Control register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C9CR</name>
|
|
<displayName>C9CR</displayName>
|
|
<description>DMA Multiplexer Channel 9 Control register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C10CR</name>
|
|
<displayName>C10CR</displayName>
|
|
<description>DMA Multiplexer Channel 10 Control register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C11CR</name>
|
|
<displayName>C11CR</displayName>
|
|
<description>DMA Multiplexer Channel 11 Control register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C12CR</name>
|
|
<displayName>C12CR</displayName>
|
|
<description>DMA Multiplexer Channel 12 Control register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C13CR</name>
|
|
<displayName>C13CR</displayName>
|
|
<description>DMA Multiplexer Channel 13 Control register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNC_ID</name>
|
|
<description>SYNC_ID</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBREQ</name>
|
|
<description>Nb request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPOL</name>
|
|
<description>Sync polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SE</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EGE</name>
|
|
<description>Event Generation Enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOIE</name>
|
|
<description>Synchronization Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAREQ_ID</name>
|
|
<description>DMA Request ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CSR</name>
|
|
<displayName>CSR</displayName>
|
|
<description>DMA Multiplexer Channel Status register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SOF0</name>
|
|
<description>Synchronization Overrun Flag 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF1</name>
|
|
<description>Synchronization Overrun Flag 1</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF2</name>
|
|
<description>Synchronization Overrun Flag 2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF3</name>
|
|
<description>Synchronization Overrun Flag 3</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF4</name>
|
|
<description>Synchronization Overrun Flag 4</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF5</name>
|
|
<description>Synchronization Overrun Flag 5</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF6</name>
|
|
<description>Synchronization Overrun Flag 6</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF7</name>
|
|
<description>Synchronization Overrun Flag 7</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF8</name>
|
|
<description>Synchronization Overrun Flag 8</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF9</name>
|
|
<description>Synchronization Overrun Flag 9</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF10</name>
|
|
<description>Synchronization Overrun Flag 10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF11</name>
|
|
<description>Synchronization Overrun Flag 11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF12</name>
|
|
<description>Synchronization Overrun Flag 12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOF13</name>
|
|
<description>Synchronization Overrun Flag 13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFR</name>
|
|
<displayName>CFR</displayName>
|
|
<description>DMA Channel Clear Flag Register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CSOF0</name>
|
|
<description>Synchronization Clear Overrun Flag 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF1</name>
|
|
<description>Synchronization Clear Overrun Flag 1</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF2</name>
|
|
<description>Synchronization Clear Overrun Flag 2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF3</name>
|
|
<description>Synchronization Clear Overrun Flag 3</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF4</name>
|
|
<description>Synchronization Clear Overrun Flag 4</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF5</name>
|
|
<description>Synchronization Clear Overrun Flag 5</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF6</name>
|
|
<description>Synchronization Clear Overrun Flag 6</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF7</name>
|
|
<description>Synchronization Clear Overrun Flag 7</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF8</name>
|
|
<description>Synchronization Clear Overrun Flag 8</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF9</name>
|
|
<description>Synchronization Clear Overrun Flag 9</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF10</name>
|
|
<description>Synchronization Clear Overrun Flag 10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF11</name>
|
|
<description>Synchronization Clear Overrun Flag 11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF12</name>
|
|
<description>Synchronization Clear Overrun Flag 12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSOF13</name>
|
|
<description>Synchronization Clear Overrun Flag 13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RG0CR</name>
|
|
<displayName>RG0CR</displayName>
|
|
<description>DMA Request Generator 0 Control Register</description>
|
|
<addressOffset>0x100</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>GNBREQ</name>
|
|
<description>Number of Request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPOL</name>
|
|
<description>Generation Polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GE</name>
|
|
<description>Generation Enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIE</name>
|
|
<description>Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIG_ID</name>
|
|
<description>Signal ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RG1CR</name>
|
|
<displayName>RG1CR</displayName>
|
|
<description>DMA Request Generator 1 Control Register</description>
|
|
<addressOffset>0x104</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>GNBREQ</name>
|
|
<description>Number of Request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPOL</name>
|
|
<description>Generation Polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GE</name>
|
|
<description>Generation Enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIE</name>
|
|
<description>Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIG_ID</name>
|
|
<description>Signal ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RG2CR</name>
|
|
<displayName>RG2CR</displayName>
|
|
<description>DMA Request Generator 2 Control Register</description>
|
|
<addressOffset>0x108</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>GNBREQ</name>
|
|
<description>Number of Request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPOL</name>
|
|
<description>Generation Polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GE</name>
|
|
<description>Generation Enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIE</name>
|
|
<description>Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIG_ID</name>
|
|
<description>Signal ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RG3CR</name>
|
|
<displayName>RG3CR</displayName>
|
|
<description>DMA Request Generator 3 Control Register</description>
|
|
<addressOffset>0x10C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>GNBREQ</name>
|
|
<description>Number of Request</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPOL</name>
|
|
<description>Generation Polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GE</name>
|
|
<description>Generation Enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIE</name>
|
|
<description>Overrun Interrupt Enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIG_ID</name>
|
|
<description>Signal ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RGSR</name>
|
|
<displayName>RGSR</displayName>
|
|
<description>DMA Request Generator Status Register</description>
|
|
<addressOffset>0x140</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OF0</name>
|
|
<description>Generator Overrun Flag 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OF1</name>
|
|
<description>Generator Overrun Flag 1</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OF2</name>
|
|
<description>Generator Overrun Flag 2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OF3</name>
|
|
<description>Generator Overrun Flag 3</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RGCFR</name>
|
|
<displayName>RGCFR</displayName>
|
|
<description>DMA Request Generator Clear Flag Register</description>
|
|
<addressOffset>0x144</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COF0</name>
|
|
<description>Clear trigger Overrun Flag 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COF1</name>
|
|
<description>Clear trigger Overrun Flag 1</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COF2</name>
|
|
<description>Clear trigger Overrun Flag 2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COF3</name>
|
|
<description>Clear trigger Overrun Flag 3</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>CRC</name>
|
|
<description>Cyclic redundancy check calculation unit</description>
|
|
<groupName>CRC</groupName>
|
|
<baseAddress>0x40023000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>DR</name>
|
|
<displayName>DR</displayName>
|
|
<description>Data register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DR</name>
|
|
<description>Data register bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IDR</name>
|
|
<displayName>IDR</displayName>
|
|
<description>Independent data register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IDR</name>
|
|
<description>General-purpose 32-bit data register bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>REV_OUT</name>
|
|
<description>Reverse output data</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>REV_IN</name>
|
|
<description>Reverse input data</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>POLYSIZE</name>
|
|
<description>Polynomial size</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RESET</name>
|
|
<description>RESET bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>INIT</name>
|
|
<displayName>INIT</displayName>
|
|
<description>Initial CRC value</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CRC_INIT</name>
|
|
<description>Programmable initial CRC value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>POL</name>
|
|
<displayName>POL</displayName>
|
|
<description>polynomial</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x04C11DB7</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>POL</name>
|
|
<description>Programmable polynomial</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>LCD</name>
|
|
<description>Liquid crystal display controller</description>
|
|
<groupName>LCD</groupName>
|
|
<baseAddress>0x40002400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>LCD</name>
|
|
<description>LCD global interrupt</description>
|
|
<value>49</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BIAS</name>
|
|
<description>Bias selector</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DUTY</name>
|
|
<description>Duty selection</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VSEL</name>
|
|
<description>Voltage source selection</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDEN</name>
|
|
<description>LCD controller enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUX_SEG</name>
|
|
<description>Mux segment enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUFEN</name>
|
|
<description>Voltage output buffer enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FCR</name>
|
|
<displayName>FCR</displayName>
|
|
<description>frame control register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PS</name>
|
|
<description>PS 16-bit prescaler</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIV</name>
|
|
<description>DIV clock divider</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLINK</name>
|
|
<description>Blink mode selection</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLINKF</name>
|
|
<description>Blink frequency selection</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC</name>
|
|
<description>Contrast control</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEAD</name>
|
|
<description>Dead time duration</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PON</name>
|
|
<description>Pulse ON duration</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDDIE</name>
|
|
<description>Update display done interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOFIE</name>
|
|
<description>Start of frame interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HD</name>
|
|
<description>High drive enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000020</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FCRSF</name>
|
|
<description>LCD Frame Control Register Synchronization flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>RDY</name>
|
|
<description>Ready flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>UDD</name>
|
|
<description>Update Display Done</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>UDR</name>
|
|
<description>Update display request</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SOF</name>
|
|
<description>Start of frame flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ENS</name>
|
|
<description>ENS</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CLR</name>
|
|
<displayName>CLR</displayName>
|
|
<description>clear register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UDDC</name>
|
|
<description>Update display done clear</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOFC</name>
|
|
<description>Start of frame flag clear</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM0</name>
|
|
<displayName>RAM_COM0</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM1</name>
|
|
<displayName>RAM_COM1</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM2</name>
|
|
<displayName>RAM_COM2</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM3</name>
|
|
<displayName>RAM_COM3</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM4</name>
|
|
<displayName>RAM_COM4</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM5</name>
|
|
<displayName>RAM_COM5</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM6</name>
|
|
<displayName>RAM_COM6</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RAM_COM7</name>
|
|
<displayName>RAM_COM7</displayName>
|
|
<description>display memory</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>S31</name>
|
|
<description>S31</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S30</name>
|
|
<description>S30</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S29</name>
|
|
<description>S29</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S28</name>
|
|
<description>S28</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S27</name>
|
|
<description>S27</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S26</name>
|
|
<description>S26</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S25</name>
|
|
<description>S25</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S24</name>
|
|
<description>S24</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S23</name>
|
|
<description>S23</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S22</name>
|
|
<description>S22</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S21</name>
|
|
<description>S21</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S20</name>
|
|
<description>S20</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S19</name>
|
|
<description>S19</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S18</name>
|
|
<description>S18</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S17</name>
|
|
<description>S17</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S16</name>
|
|
<description>S16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S15</name>
|
|
<description>S15</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S14</name>
|
|
<description>S14</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S13</name>
|
|
<description>S13</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S12</name>
|
|
<description>S12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S11</name>
|
|
<description>S11</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S10</name>
|
|
<description>S10</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S09</name>
|
|
<description>S09</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S08</name>
|
|
<description>S08</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S07</name>
|
|
<description>S07</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S06</name>
|
|
<description>S06</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S05</name>
|
|
<description>S05</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S04</name>
|
|
<description>S04</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S03</name>
|
|
<description>S03</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S02</name>
|
|
<description>S02</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S01</name>
|
|
<description>S01</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S00</name>
|
|
<description>S00</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>TSC</name>
|
|
<description>Touch sensing controller</description>
|
|
<groupName>TSC</groupName>
|
|
<baseAddress>0x40024000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>TSC</name>
|
|
<description>TSC global interrupt</description>
|
|
<value>39</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CTPH</name>
|
|
<description>Charge transfer pulse high</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTPL</name>
|
|
<description>Charge transfer pulse low</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSD</name>
|
|
<description>Spread spectrum deviation</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSE</name>
|
|
<description>Spread spectrum enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSPSC</name>
|
|
<description>Spread spectrum prescaler</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PGPSC</name>
|
|
<description>pulse generator prescaler</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MCV</name>
|
|
<description>Max count value</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IODEF</name>
|
|
<description>I/O Default mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCPOL</name>
|
|
<description>Synchronization pin polarity</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AM</name>
|
|
<description>Acquisition mode</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>START</name>
|
|
<description>Start a new acquisition</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TSCE</name>
|
|
<description>Touch sensing controller enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IER</name>
|
|
<displayName>IER</displayName>
|
|
<description>interrupt enable register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MCEIE</name>
|
|
<description>Max count error interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOAIE</name>
|
|
<description>End of acquisition interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICR</name>
|
|
<displayName>ICR</displayName>
|
|
<description>interrupt clear register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MCEIC</name>
|
|
<description>Max count error interrupt clear</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOAIC</name>
|
|
<description>End of acquisition interrupt clear</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>interrupt status register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MCEF</name>
|
|
<description>Max count error flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOAF</name>
|
|
<description>End of acquisition flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOHCR</name>
|
|
<displayName>IOHCR</displayName>
|
|
<description>I/O hysteresis control register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>G7_IO4</name>
|
|
<description>G7_IO4</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO3</name>
|
|
<description>G7_IO3</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO2</name>
|
|
<description>G7_IO2</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO1</name>
|
|
<description>G7_IO1</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO4</name>
|
|
<description>G6_IO4</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO3</name>
|
|
<description>G6_IO3</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO2</name>
|
|
<description>G6_IO2</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO1</name>
|
|
<description>G6_IO1</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO4</name>
|
|
<description>G5_IO4</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO3</name>
|
|
<description>G5_IO3</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO2</name>
|
|
<description>G5_IO2</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO1</name>
|
|
<description>G5_IO1</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO4</name>
|
|
<description>G4_IO4</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO3</name>
|
|
<description>G4_IO3</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO2</name>
|
|
<description>G4_IO2</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO1</name>
|
|
<description>G4_IO1</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO4</name>
|
|
<description>G3_IO4</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO3</name>
|
|
<description>G3_IO3</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO2</name>
|
|
<description>G3_IO2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO1</name>
|
|
<description>G3_IO1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO4</name>
|
|
<description>G2_IO4</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO3</name>
|
|
<description>G2_IO3</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO2</name>
|
|
<description>G2_IO2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO1</name>
|
|
<description>G2_IO1</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO4</name>
|
|
<description>G1_IO4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO3</name>
|
|
<description>G1_IO3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO2</name>
|
|
<description>G1_IO2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO1</name>
|
|
<description>G1_IO1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOASCR</name>
|
|
<displayName>IOASCR</displayName>
|
|
<description>I/O analog switch control register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>G7_IO4</name>
|
|
<description>G7_IO4</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO3</name>
|
|
<description>G7_IO3</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO2</name>
|
|
<description>G7_IO2</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO1</name>
|
|
<description>G7_IO1</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO4</name>
|
|
<description>G6_IO4</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO3</name>
|
|
<description>G6_IO3</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO2</name>
|
|
<description>G6_IO2</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO1</name>
|
|
<description>G6_IO1</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO4</name>
|
|
<description>G5_IO4</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO3</name>
|
|
<description>G5_IO3</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO2</name>
|
|
<description>G5_IO2</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO1</name>
|
|
<description>G5_IO1</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO4</name>
|
|
<description>G4_IO4</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO3</name>
|
|
<description>G4_IO3</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO2</name>
|
|
<description>G4_IO2</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO1</name>
|
|
<description>G4_IO1</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO4</name>
|
|
<description>G3_IO4</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO3</name>
|
|
<description>G3_IO3</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO2</name>
|
|
<description>G3_IO2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO1</name>
|
|
<description>G3_IO1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO4</name>
|
|
<description>G2_IO4</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO3</name>
|
|
<description>G2_IO3</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO2</name>
|
|
<description>G2_IO2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO1</name>
|
|
<description>G2_IO1</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO4</name>
|
|
<description>G1_IO4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO3</name>
|
|
<description>G1_IO3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO2</name>
|
|
<description>G1_IO2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO1</name>
|
|
<description>G1_IO1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOSCR</name>
|
|
<displayName>IOSCR</displayName>
|
|
<description>I/O sampling control register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>G7_IO4</name>
|
|
<description>G7_IO4</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO3</name>
|
|
<description>G7_IO3</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO2</name>
|
|
<description>G7_IO2</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO1</name>
|
|
<description>G7_IO1</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO4</name>
|
|
<description>G6_IO4</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO3</name>
|
|
<description>G6_IO3</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO2</name>
|
|
<description>G6_IO2</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO1</name>
|
|
<description>G6_IO1</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO4</name>
|
|
<description>G5_IO4</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO3</name>
|
|
<description>G5_IO3</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO2</name>
|
|
<description>G5_IO2</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO1</name>
|
|
<description>G5_IO1</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO4</name>
|
|
<description>G4_IO4</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO3</name>
|
|
<description>G4_IO3</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO2</name>
|
|
<description>G4_IO2</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO1</name>
|
|
<description>G4_IO1</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO4</name>
|
|
<description>G3_IO4</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO3</name>
|
|
<description>G3_IO3</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO2</name>
|
|
<description>G3_IO2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO1</name>
|
|
<description>G3_IO1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO4</name>
|
|
<description>G2_IO4</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO3</name>
|
|
<description>G2_IO3</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO2</name>
|
|
<description>G2_IO2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO1</name>
|
|
<description>G2_IO1</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO4</name>
|
|
<description>G1_IO4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO3</name>
|
|
<description>G1_IO3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO2</name>
|
|
<description>G1_IO2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO1</name>
|
|
<description>G1_IO1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOCCR</name>
|
|
<displayName>IOCCR</displayName>
|
|
<description>I/O channel control register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>G7_IO4</name>
|
|
<description>G7_IO4</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO3</name>
|
|
<description>G7_IO3</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO2</name>
|
|
<description>G7_IO2</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G7_IO1</name>
|
|
<description>G7_IO1</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO4</name>
|
|
<description>G6_IO4</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO3</name>
|
|
<description>G6_IO3</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO2</name>
|
|
<description>G6_IO2</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G6_IO1</name>
|
|
<description>G6_IO1</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO4</name>
|
|
<description>G5_IO4</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO3</name>
|
|
<description>G5_IO3</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO2</name>
|
|
<description>G5_IO2</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G5_IO1</name>
|
|
<description>G5_IO1</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO4</name>
|
|
<description>G4_IO4</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO3</name>
|
|
<description>G4_IO3</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO2</name>
|
|
<description>G4_IO2</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G4_IO1</name>
|
|
<description>G4_IO1</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO4</name>
|
|
<description>G3_IO4</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO3</name>
|
|
<description>G3_IO3</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO2</name>
|
|
<description>G3_IO2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G3_IO1</name>
|
|
<description>G3_IO1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO4</name>
|
|
<description>G2_IO4</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO3</name>
|
|
<description>G2_IO3</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO2</name>
|
|
<description>G2_IO2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G2_IO1</name>
|
|
<description>G2_IO1</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO4</name>
|
|
<description>G1_IO4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO3</name>
|
|
<description>G1_IO3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO2</name>
|
|
<description>G1_IO2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>G1_IO1</name>
|
|
<description>G1_IO1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOGCSR</name>
|
|
<displayName>IOGCSR</displayName>
|
|
<description>I/O group control status register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>G7S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G6S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G5S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G4S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G3S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G2S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G1S</name>
|
|
<description>Analog I/O group x status</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>G7E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>G6E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>G5E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>G4E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>G3E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>G2E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>G1E</name>
|
|
<description>Analog I/O group x enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG1CR</name>
|
|
<displayName>IOG1CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG2CR</name>
|
|
<displayName>IOG2CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG3CR</name>
|
|
<displayName>IOG3CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG4CR</name>
|
|
<displayName>IOG4CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG5CR</name>
|
|
<displayName>IOG5CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG6CR</name>
|
|
<displayName>IOG6CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IOG7CR</name>
|
|
<displayName>IOG7CR</displayName>
|
|
<description>I/O group x counter register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>IWDG</name>
|
|
<description>Independent watchdog</description>
|
|
<groupName>IWDG</groupName>
|
|
<baseAddress>0x40003000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>KR</name>
|
|
<displayName>KR</displayName>
|
|
<description>Key register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>KEY</name>
|
|
<description>Key value (write only, read 0x0000)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PR</name>
|
|
<displayName>PR</displayName>
|
|
<description>Prescaler register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PR</name>
|
|
<description>Prescaler divider</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR</name>
|
|
<displayName>RLR</displayName>
|
|
<description>Reload register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000FFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RL</name>
|
|
<description>Watchdog counter reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>Status register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WVU</name>
|
|
<description>Watchdog counter window value update</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RVU</name>
|
|
<description>Watchdog counter reload value update</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVU</name>
|
|
<description>Watchdog prescaler value update</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>WINR</name>
|
|
<displayName>WINR</displayName>
|
|
<description>Window register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000FFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WIN</name>
|
|
<description>Watchdog counter window value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>WWDG</name>
|
|
<description>System window watchdog</description>
|
|
<groupName>WWDG</groupName>
|
|
<baseAddress>0x40002C00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>WWDG</name>
|
|
<description>Window Watchdog interrupt</description>
|
|
<value>0</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000007F</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WDGA</name>
|
|
<description>Activation bit</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>T</name>
|
|
<description>7-bit counter (MSB to LSB)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFR</name>
|
|
<displayName>CFR</displayName>
|
|
<description>Configuration register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000007F</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WDGTB</name>
|
|
<description>Timer base</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWI</name>
|
|
<description>Early wakeup interrupt</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>W</name>
|
|
<description>7-bit window value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>Status register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EWIF</name>
|
|
<description>Early wakeup interrupt flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>I2C1</name>
|
|
<description>Inter-integrated circuit</description>
|
|
<groupName>I2C</groupName>
|
|
<baseAddress>0x40005400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>I2C1_EV</name>
|
|
<description>I2C1 event interrupt</description>
|
|
<value>30</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>I2C1_ER</name>
|
|
<description>I2C1 error interrupt</description>
|
|
<value>31</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>Control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PE</name>
|
|
<description>Peripheral enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXIE</name>
|
|
<description>TX Interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXIE</name>
|
|
<description>RX Interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADDRIE</name>
|
|
<description>Address match interrupt enable (slave only)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NACKIE</name>
|
|
<description>Not acknowledge received interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STOPIE</name>
|
|
<description>STOP detection Interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer Complete interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Error interrupts enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DNF</name>
|
|
<description>Digital noise filter</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ANFOFF</name>
|
|
<description>Analog noise filter OFF</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXDMAEN</name>
|
|
<description>DMA transmission requests enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXDMAEN</name>
|
|
<description>DMA reception requests enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SBC</name>
|
|
<description>Slave byte control</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NOSTRETCH</name>
|
|
<description>Clock stretching disable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUPEN</name>
|
|
<description>Wakeup from STOP enable</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GCEN</name>
|
|
<description>General call enable</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMBHEN</name>
|
|
<description>SMBus Host address enable</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMBDEN</name>
|
|
<description>SMBus Device Default address enable</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ALERTEN</name>
|
|
<description>SMBUS alert enable</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PECEN</name>
|
|
<description>PEC enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>Control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PECBYTE</name>
|
|
<description>Packet error checking byte</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AUTOEND</name>
|
|
<description>Automatic end mode (master mode)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RELOAD</name>
|
|
<description>NBYTES reload mode</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBYTES</name>
|
|
<description>Number of bytes</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NACK</name>
|
|
<description>NACK generation (slave mode)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STOP</name>
|
|
<description>Stop generation (master mode)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>START</name>
|
|
<description>Start generation</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HEAD10R</name>
|
|
<description>10-bit address header only read direction (master receiver mode)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADD10</name>
|
|
<description>10-bit addressing mode (master mode)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RD_WRN</name>
|
|
<description>Transfer direction (master mode)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SADD</name>
|
|
<description>Slave address bit (master mode)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OAR1</name>
|
|
<displayName>OAR1</displayName>
|
|
<description>Own address register 1</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OA1</name>
|
|
<description>Interface address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OA1MODE</name>
|
|
<description>Own Address 1 10-bit mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OA1EN</name>
|
|
<description>Own Address 1 enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OAR2</name>
|
|
<displayName>OAR2</displayName>
|
|
<description>Own address register 2</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OA2</name>
|
|
<description>Interface address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OA2MSK</name>
|
|
<description>Own Address 2 masks</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OA2EN</name>
|
|
<description>Own Address 2 enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TIMINGR</name>
|
|
<displayName>TIMINGR</displayName>
|
|
<description>Timing register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SCLL</name>
|
|
<description>SCL low period (master mode)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SCLH</name>
|
|
<description>SCL high period (master mode)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDADEL</name>
|
|
<description>Data hold time</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SCLDEL</name>
|
|
<description>Data setup time</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRESC</name>
|
|
<description>Timing prescaler</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TIMEOUTR</name>
|
|
<displayName>TIMEOUTR</displayName>
|
|
<description>Status register 1</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TIMEOUTA</name>
|
|
<description>Bus timeout A</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIDLE</name>
|
|
<description>Idle clock timeout detection</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIMOUTEN</name>
|
|
<description>Clock timeout enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIMEOUTB</name>
|
|
<description>Bus timeout B</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEXTEN</name>
|
|
<description>Extended clock timeout enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>Interrupt and Status register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDCODE</name>
|
|
<description>Address match code (Slave mode)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Transfer direction (Slave mode)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>BUSY</name>
|
|
<description>Bus busy</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ALERT</name>
|
|
<description>SMBus alert</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>TIMEOUT</name>
|
|
<description>Timeout or t_low detection flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PECERR</name>
|
|
<description>PEC Error in reception</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>OVR</name>
|
|
<description>Overrun/Underrun (slave mode)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ARLO</name>
|
|
<description>Arbitration lost</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>BERR</name>
|
|
<description>Bus error</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>TCR</name>
|
|
<description>Transfer Complete Reload</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>TC</name>
|
|
<description>Transfer Complete (master mode)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>STOPF</name>
|
|
<description>Stop detection flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NACKF</name>
|
|
<description>Not acknowledge received flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ADDR</name>
|
|
<description>Address matched (slave mode)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>RXNE</name>
|
|
<description>Receive data register not empty (receivers)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>TXIS</name>
|
|
<description>Transmit interrupt status (transmitters)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>TXE</name>
|
|
<description>Transmit data register empty (transmitters)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICR</name>
|
|
<displayName>ICR</displayName>
|
|
<description>Interrupt clear register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ALERTCF</name>
|
|
<description>Alert flag clear</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIMOUTCF</name>
|
|
<description>Timeout detection flag clear</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PECCF</name>
|
|
<description>PEC Error flag clear</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRCF</name>
|
|
<description>Overrun/Underrun flag clear</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARLOCF</name>
|
|
<description>Arbitration lost flag clear</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BERRCF</name>
|
|
<description>Bus error flag clear</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STOPCF</name>
|
|
<description>Stop detection flag clear</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NACKCF</name>
|
|
<description>Not Acknowledge flag clear</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADDRCF</name>
|
|
<description>Address Matched flag clear</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PECR</name>
|
|
<displayName>PECR</displayName>
|
|
<description>PEC register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PEC</name>
|
|
<description>Packet error checking register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RXDR</name>
|
|
<displayName>RXDR</displayName>
|
|
<description>Receive data register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RXDATA</name>
|
|
<description>8-bit receive data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TXDR</name>
|
|
<displayName>TXDR</displayName>
|
|
<description>Transmit data register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TXDATA</name>
|
|
<description>8-bit transmit data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral derivedFrom="I2C1">
|
|
<name>I2C3</name>
|
|
<baseAddress>0x40005C00</baseAddress>
|
|
<interrupt>
|
|
<name>I2C3_EV</name>
|
|
<description>I2C3 event interrupt</description>
|
|
<value>32</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>I2C3_ER</name>
|
|
<description>I2C3 error interrupt</description>
|
|
<value>33</value>
|
|
</interrupt>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>Flash</name>
|
|
<description>Flash</description>
|
|
<groupName>Flash</groupName>
|
|
<baseAddress>0x58004000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x90</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>FLASH</name>
|
|
<description>Flash global interrupt</description>
|
|
<value>4</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>ACR</name>
|
|
<displayName>ACR</displayName>
|
|
<description>Access control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000600</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LATENCY</name>
|
|
<description>Latency</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRFTEN</name>
|
|
<description>Prefetch enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ICEN</name>
|
|
<description>Instruction cache enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DCEN</name>
|
|
<description>Data cache enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ICRST</name>
|
|
<description>Instruction cache reset</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DCRST</name>
|
|
<description>Data cache reset</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PES</name>
|
|
<description>CPU1 CortexM4 program erase suspend request</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EMPTY</name>
|
|
<description>Flash User area empty</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR</name>
|
|
<displayName>KEYR</displayName>
|
|
<description>Flash key register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>KEYR</name>
|
|
<description>KEYR</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OPTKEYR</name>
|
|
<displayName>OPTKEYR</displayName>
|
|
<description>Option byte key register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OPTKEYR</name>
|
|
<description>Option byte key</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>Status register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EOP</name>
|
|
<description>End of operation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>OPERR</name>
|
|
<description>Operation error</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PROGERR</name>
|
|
<description>Programming error</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>WRPERR</name>
|
|
<description>Write protected error</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PGAERR</name>
|
|
<description>Programming alignment error</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SIZERR</name>
|
|
<description>Size error</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PGSERR</name>
|
|
<description>Programming sequence error</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MISERR</name>
|
|
<description>Fast programming data miss error</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>FASTERR</name>
|
|
<description>Fast programming error</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>OPTNV</name>
|
|
<description>User Option OPTVAL indication</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>RDERR</name>
|
|
<description>PCROP read error</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>OPTVERR</name>
|
|
<description>Option validity error</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BSY</name>
|
|
<description>Busy</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>CFGBSY</name>
|
|
<description>Programming or erase configuration busy</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PESD</name>
|
|
<description>Programming or erase operation suspended</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Flash control register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xC0000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PG</name>
|
|
<description>Programming</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PER</name>
|
|
<description>Page erase</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MER</name>
|
|
<description>This bit triggers the mass erase (all user pages) when set</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PNB</name>
|
|
<description>Page number selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STRT</name>
|
|
<description>Start</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPTSTRT</name>
|
|
<description>Options modification start</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSTPG</name>
|
|
<description>Fast programming</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOPIE</name>
|
|
<description>End of operation interrupt enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Error interrupt enable</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RDERRIE</name>
|
|
<description>PCROP read error interrupt enable</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OBL_LAUNCH</name>
|
|
<description>Force the option byte loading</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPTLOCK</name>
|
|
<description>Options Lock</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>FLASH_CR Lock</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ECCR</name>
|
|
<displayName>ECCR</displayName>
|
|
<description>Flash ECC register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR_ECC</name>
|
|
<description>ECC fail address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>17</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SYSF_ECC</name>
|
|
<description>System Flash ECC fail</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ECCCIE</name>
|
|
<description>ECC correction interrupt enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>CPUID</name>
|
|
<description>CPU identification</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ECCC</name>
|
|
<description>ECC correction</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>ECCD</name>
|
|
<description>ECC detection</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OPTR</name>
|
|
<displayName>OPTR</displayName>
|
|
<description>Flash option register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x10708000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RDP</name>
|
|
<description>Read protection level</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ESE</name>
|
|
<description>Security enabled</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BOR_LEV</name>
|
|
<description>BOR reset Level</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>nRST_STOP</name>
|
|
<description>nRST_STOP</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>nRST_STDBY</name>
|
|
<description>nRST_STDBY</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>nRST_SHDW</name>
|
|
<description>nRST_SHDW</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDWG_SW</name>
|
|
<description>Independent watchdog selection</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IWDG_STOP</name>
|
|
<description>Independent watchdog counter freeze in Stop mode</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IWDG_STDBY</name>
|
|
<description>Independent watchdog counter freeze in Standby mode</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WWDG_SW</name>
|
|
<description>Window watchdog selection</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>nBOOT1</name>
|
|
<description>Boot configuration</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM2_PE</name>
|
|
<description>SRAM2 parity check enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM2_RST</name>
|
|
<description>SRAM2 Erase when system reset</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>nSWBOOT0</name>
|
|
<description>Software Boot0</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>nBOOT0</name>
|
|
<description>nBoot0 option bit</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AGC_TRIM</name>
|
|
<description>Radio Automatic Gain Control Trimming</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PCROP1ASR</name>
|
|
<displayName>PCROP1ASR</displayName>
|
|
<description>Flash Bank 1 PCROP Start address zone A register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFE00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PCROP1A_STRT</name>
|
|
<description>Bank 1 PCROPQ area start offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PCROP1AER</name>
|
|
<displayName>PCROP1AER</displayName>
|
|
<description>Flash Bank 1 PCROP End address zone A register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x7FFFFE00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PCROP1A_END</name>
|
|
<description>Bank 1 PCROP area end offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PCROP_RDP</name>
|
|
<description>PCROP area preserved when RDP level decreased</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>WRP1AR</name>
|
|
<displayName>WRP1AR</displayName>
|
|
<description>Flash Bank 1 WRP area A address register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFF00FF00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WRP1A_STRT</name>
|
|
<description>Bank 1 WRP first area A start offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WRP1A_END</name>
|
|
<description>Bank 1 WRP first area A end offset</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>WRP1BR</name>
|
|
<displayName>WRP1BR</displayName>
|
|
<description>Flash Bank 1 WRP area B address register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFF00FF00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WRP1B_STRT</name>
|
|
<description>Bank 1 WRP second area B end offset</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WRP1B_END</name>
|
|
<description>Bank 1 WRP second area B start offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PCROP1BSR</name>
|
|
<displayName>PCROP1BSR</displayName>
|
|
<description>Flash Bank 1 PCROP Start address area B register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFE00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PCROP1B_STRT</name>
|
|
<description>Bank 1 PCROP area B start offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PCROP1BER</name>
|
|
<displayName>PCROP1BER</displayName>
|
|
<description>Flash Bank 1 PCROP End address area B register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFE00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PCROP1B_END</name>
|
|
<description>Bank 1 PCROP area end area B offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPCCBR</name>
|
|
<displayName>IPCCBR</displayName>
|
|
<description>IPCC mailbox data buffer address register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFC000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPCCDBA</name>
|
|
<description>PCC mailbox data buffer base address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>14</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2ACR</name>
|
|
<displayName>C2ACR</displayName>
|
|
<description>CPU2 cortex M0 access control register</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000600</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PRFTEN</name>
|
|
<description>CPU2 cortex M0 prefetch enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ICEN</name>
|
|
<description>CPU2 cortex M0 instruction cache enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ICRST</name>
|
|
<description>CPU2 cortex M0 instruction cache reset</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PES</name>
|
|
<description>CPU2 cortex M0 program erase suspend request</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2SR</name>
|
|
<displayName>C2SR</displayName>
|
|
<description>CPU2 cortex M0 status register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EOP</name>
|
|
<description>End of operation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPERR</name>
|
|
<description>Operation error</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROGERR</name>
|
|
<description>Programming error</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WRPERR</name>
|
|
<description>write protection error</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PGAERR</name>
|
|
<description>Programming alignment error</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIZERR</name>
|
|
<description>Size error</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PGSERR</name>
|
|
<description>Programming sequence error</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MISSERR</name>
|
|
<description>Fast programming data miss error</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FASTERR</name>
|
|
<description>Fast programming error</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RDERR</name>
|
|
<description>PCROP read error</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BSY</name>
|
|
<description>Busy</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFGBSY</name>
|
|
<description>Programming or erase configuration busy</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PESD</name>
|
|
<description>Programming or erase operation suspended</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2CR</name>
|
|
<displayName>C2CR</displayName>
|
|
<description>CPU2 cortex M0 control register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PG</name>
|
|
<description>Programming</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PER</name>
|
|
<description>Page erase</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MER</name>
|
|
<description>Masse erase</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PNB</name>
|
|
<description>Page Number selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STRT</name>
|
|
<description>Start</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSTPG</name>
|
|
<description>Fast programming</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOPIE</name>
|
|
<description>End of operation interrupt enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Error interrupt enable</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RDERRIE</name>
|
|
<description>PCROP read error interrupt enable</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SFR</name>
|
|
<displayName>SFR</displayName>
|
|
<description>Secure flash start address register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFEE00</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SFSA</name>
|
|
<description>Secure flash start address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DDS</name>
|
|
<description>Disable Cortex M0 debug access</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSD</name>
|
|
<description>Flash security disable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SRRVR</name>
|
|
<displayName>SRRVR</displayName>
|
|
<description>Secure SRAM2 start address and cortex M0 reset vector register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x01000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SBRV</name>
|
|
<description>cortex M0 access control register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>18</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SBRSA</name>
|
|
<description>Secure backup SRAM2a start address</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BRSD</name>
|
|
<description>backup SRAM2a security disable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SNBRSA</name>
|
|
<description>Secure non backup SRAM2a start address</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C2OPT</name>
|
|
<description>CPU2 cortex M0 boot reset vector memory selection</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBRSD</name>
|
|
<description>non-backup SRAM2b security disable</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>QUADSPI</name>
|
|
<description>QuadSPI interface</description>
|
|
<groupName>QUADSPI</groupName>
|
|
<baseAddress>0xA0001000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>QUADSPI</name>
|
|
<description>QSPI global interrupt</description>
|
|
<value>50</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PRESCALER</name>
|
|
<description>Clock prescaler</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PMM</name>
|
|
<description>Polling match mode</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>APMS</name>
|
|
<description>Automatic poll mode stop</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TOIE</name>
|
|
<description>TimeOut interrupt enable</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMIE</name>
|
|
<description>Status match interrupt enable</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FTIE</name>
|
|
<description>FIFO threshold interrupt enable</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transfer complete interrupt enable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEIE</name>
|
|
<description>Transfer error interrupt enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FTHRES</name>
|
|
<description>FIFO threshold level</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSHIFT</name>
|
|
<description>Sample shift</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCEN</name>
|
|
<description>Timeout counter enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAEN</name>
|
|
<description>DMA enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABORT</name>
|
|
<description>Abort request</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DCR</name>
|
|
<displayName>DCR</displayName>
|
|
<description>device configuration register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FSIZE</name>
|
|
<description>FLASH memory size</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSHT</name>
|
|
<description>Chip select high time</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKMODE</name>
|
|
<description>Mode 0 / mode 3</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLEVEL</name>
|
|
<description>FIFO level</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUSY</name>
|
|
<description>Busy</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TOF</name>
|
|
<description>Timeout flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMF</name>
|
|
<description>Status match flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FTF</name>
|
|
<description>FIFO threshold flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCF</name>
|
|
<description>Transfer complete flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEF</name>
|
|
<description>Transfer error flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FCR</name>
|
|
<displayName>FCR</displayName>
|
|
<description>flag clear register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CTOF</name>
|
|
<description>Clear timeout flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSMF</name>
|
|
<description>Clear status match flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTCF</name>
|
|
<description>Clear transfer complete flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTEF</name>
|
|
<description>Clear transfer error flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DLR</name>
|
|
<displayName>DLR</displayName>
|
|
<description>data length register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DL</name>
|
|
<description>Data length</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR</name>
|
|
<displayName>CCR</displayName>
|
|
<description>communication configuration register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DDRM</name>
|
|
<description>Double data rate mode</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIOO</name>
|
|
<description>Send instruction only once mode</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FMODE</name>
|
|
<description>Functional mode</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMODE</name>
|
|
<description>Data mode</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DCYC</name>
|
|
<description>Number of dummy cycles</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABSIZE</name>
|
|
<description>Alternate bytes size</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABMODE</name>
|
|
<description>Alternate bytes mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADSIZE</name>
|
|
<description>Address size</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADMODE</name>
|
|
<description>Address mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IMODE</name>
|
|
<description>Instruction mode</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>INSTRUCTION</name>
|
|
<description>Instruction</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AR</name>
|
|
<displayName>AR</displayName>
|
|
<description>address register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDRESS</name>
|
|
<description>Address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ABR</name>
|
|
<displayName>ABR</displayName>
|
|
<description>ABR</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ALTERNATE</name>
|
|
<description>ALTERNATE</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DR</name>
|
|
<displayName>DR</displayName>
|
|
<description>data register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DATA</name>
|
|
<description>Data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PSMKR</name>
|
|
<displayName>PSMKR</displayName>
|
|
<description>polling status mask register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MASK</name>
|
|
<description>Status mask</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PSMAR</name>
|
|
<displayName>PSMAR</displayName>
|
|
<description>polling status match register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MATCH</name>
|
|
<description>Status match</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PIR</name>
|
|
<displayName>PIR</displayName>
|
|
<description>polling interval register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>INTERVAL</name>
|
|
<description>Polling interval</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LPTR</name>
|
|
<displayName>LPTR</displayName>
|
|
<description>low-power timeout register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TIMEOUT</name>
|
|
<description>Timeout period</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>RCC</name>
|
|
<description>Reset and clock control</description>
|
|
<groupName>RCC</groupName>
|
|
<baseAddress>0x58000000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>RCC</name>
|
|
<description>RCC global interrupt</description>
|
|
<value>5</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Clock control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000061</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PLLSAI1RDY</name>
|
|
<description>SAI1 PLL clock ready flag</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PLLSAI1ON</name>
|
|
<description>SAI1 PLL enable</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PLLRDY</name>
|
|
<description>Main PLL clock ready flag</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PLLON</name>
|
|
<description>Main PLL enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSEPRE</name>
|
|
<description>HSE sysclk and PLL M divider prescaler</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>CSSON</name>
|
|
<description>HSE Clock security system enable</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSEBYP</name>
|
|
<description>HSE crystal oscillator bypass</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSERDY</name>
|
|
<description>HSE clock ready flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSEON</name>
|
|
<description>HSE clock enabled</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSIKERDY</name>
|
|
<description>HSI kernel clock ready flag for peripherals requests</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSIASFS</name>
|
|
<description>HSI automatic start from Stop</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSIRDY</name>
|
|
<description>HSI clock ready flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSIKERON</name>
|
|
<description>HSI always enable for peripheral kernels</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSION</name>
|
|
<description>HSI clock enabled</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MSIRANGE</name>
|
|
<description>MSI clock ranges</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MSIPLLEN</name>
|
|
<description>MSI clock PLL enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MSIRDY</name>
|
|
<description>MSI clock ready flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>MSION</name>
|
|
<description>MSI clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICSCR</name>
|
|
<displayName>ICSCR</displayName>
|
|
<description>Internal clock sources calibration register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x40000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>HSITRIM</name>
|
|
<description>HSI clock trimming</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSICAL</name>
|
|
<description>HSI clock calibration</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>MSITRIM</name>
|
|
<description>MSI clock trimming</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MSICAL</name>
|
|
<description>MSI clock calibration</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFGR</name>
|
|
<displayName>CFGR</displayName>
|
|
<description>Clock configuration register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00070000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MCOPRE</name>
|
|
<description>Microcontroller clock output prescaler</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MCOSEL</name>
|
|
<description>Microcontroller clock output</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PPRE2F</name>
|
|
<description>APB2 prescaler flag</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PPRE1F</name>
|
|
<description>APB1 prescaler flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HPREF</name>
|
|
<description>AHB prescaler flag</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>STOPWUCK</name>
|
|
<description>Wakeup from Stop and CSS backup clock selection</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PPRE2</name>
|
|
<description>APB high-speed prescaler (APB2)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PPRE1</name>
|
|
<description>PB low-speed prescaler (APB1)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HPRE</name>
|
|
<description>AHB prescaler</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SWS</name>
|
|
<description>System clock switch status</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SW</name>
|
|
<description>System clock switch</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PLLCFGR</name>
|
|
<displayName>PLLCFGR</displayName>
|
|
<description>PLLSYS configuration register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x22040100</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PLLR</name>
|
|
<description>Main PLLSYS division factor R for SYSCLK (system clock)</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLREN</name>
|
|
<description>Main PLLSYSR PLLCLK output enable</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLQ</name>
|
|
<description>Main PLLSYS division factor Q for PLLSYSUSBCLK</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLQEN</name>
|
|
<description>Main PLLSYSQ output enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLP</name>
|
|
<description>Main PLL division factor P for PPLSYSSAICLK</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLPEN</name>
|
|
<description>Main PLLSYSP output enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLN</name>
|
|
<description>Main PLLSYS multiplication factor N</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLM</name>
|
|
<description>Division factor M for the main PLL and audio PLL (PLLSAI1 and PLLSAI2) input clock</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLSRC</name>
|
|
<description>Main PLL, PLLSAI1 and PLLSAI2 entry clock source</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PLLSAI1CFGR</name>
|
|
<displayName>PLLSAI1CFGR</displayName>
|
|
<description>PLLSAI1 configuration register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x22040100</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PLLR</name>
|
|
<description>PLLSAI division factor R for PLLADC1CLK (ADC clock)</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLREN</name>
|
|
<description>PLLSAI PLLADC1CLK output enable</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLQ</name>
|
|
<description>SAIPLL division factor Q for PLLSAIUSBCLK (48 MHz clock)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLQEN</name>
|
|
<description>SAIPLL PLLSAIUSBCLK output enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLP</name>
|
|
<description>SAI1PLL division factor P for PLLSAICLK (SAI1clock)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLPEN</name>
|
|
<description>SAIPLL PLLSAI1CLK output enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLN</name>
|
|
<description>SAIPLL multiplication factor for VCO</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CIER</name>
|
|
<displayName>CIER</displayName>
|
|
<description>Clock interrupt enable register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LSI2RDYIE</name>
|
|
<description>LSI2 ready interrupt enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSI48RDYIE</name>
|
|
<description>HSI48 ready interrupt enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSECSSIE</name>
|
|
<description>LSE clock security system interrupt enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLSAI1RDYIE</name>
|
|
<description>PLLSAI1 ready interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLRDYIE</name>
|
|
<description>PLLSYS ready interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSERDYIE</name>
|
|
<description>HSE ready interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSIRDYIE</name>
|
|
<description>HSI ready interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIRDYIE</name>
|
|
<description>MSI ready interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSERDYIE</name>
|
|
<description>LSE ready interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSI1RDYIE</name>
|
|
<description>LSI1 ready interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CIFR</name>
|
|
<displayName>CIFR</displayName>
|
|
<description>Clock interrupt flag register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LSI2RDYF</name>
|
|
<description>LSI2 ready interrupt flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSI48RDYF</name>
|
|
<description>HSI48 ready interrupt flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSECSSF</name>
|
|
<description>LSE Clock security system interrupt flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSECSSF</name>
|
|
<description>HSE Clock security system interrupt flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLSAI1RDYF</name>
|
|
<description>PLLSAI1 ready interrupt flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLRDYF</name>
|
|
<description>PLL ready interrupt flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSERDYF</name>
|
|
<description>HSE ready interrupt flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSIRDYF</name>
|
|
<description>HSI ready interrupt flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIRDYF</name>
|
|
<description>MSI ready interrupt flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSERDYF</name>
|
|
<description>LSE ready interrupt flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSI1RDYF</name>
|
|
<description>LSI1 ready interrupt flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CICR</name>
|
|
<displayName>CICR</displayName>
|
|
<description>Clock interrupt clear register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LSI2RDYC</name>
|
|
<description>LSI2 ready interrupt clear</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSI48RDYC</name>
|
|
<description>HSI48 ready interrupt clear</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSECSSC</name>
|
|
<description>LSE Clock security system interrupt clear</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSECSSC</name>
|
|
<description>HSE Clock security system interrupt clear</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLSAI1RDYC</name>
|
|
<description>PLLSAI1 ready interrupt clear</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLLRDYC</name>
|
|
<description>PLL ready interrupt clear</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSERDYC</name>
|
|
<description>HSE ready interrupt clear</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSIRDYC</name>
|
|
<description>HSI ready interrupt clear</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSIRDYC</name>
|
|
<description>MSI ready interrupt clear</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSERDYC</name>
|
|
<description>LSE ready interrupt clear</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSI1RDYC</name>
|
|
<description>LSI1 ready interrupt clear</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SMPSCR</name>
|
|
<displayName>SMPSCR</displayName>
|
|
<description>Step Down converter control register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000301</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SMPSSWS</name>
|
|
<description>Step Down converter clock switch status</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SMPSDIV</name>
|
|
<description>Step Down converter clock prescaler</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SMPSSEL</name>
|
|
<description>Step Down converter clock selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB1RSTR</name>
|
|
<displayName>AHB1RSTR</displayName>
|
|
<description>AHB1 peripheral reset register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TSCRST</name>
|
|
<description>Touch Sensing Controller reset</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCRST</name>
|
|
<description>CRC reset</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAMUXRST</name>
|
|
<description>DMAMUX reset</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2RST</name>
|
|
<description>DMA2 reset</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1RST</name>
|
|
<description>DMA1 reset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB2RSTR</name>
|
|
<displayName>AHB2RSTR</displayName>
|
|
<description>AHB2 peripheral reset register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES1RST</name>
|
|
<description>AES1 hardware accelerator reset</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCRST</name>
|
|
<description>ADC reset</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOHRST</name>
|
|
<description>IO port H reset</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOERST</name>
|
|
<description>IO port E reset</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIODRST</name>
|
|
<description>IO port D reset</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOCRST</name>
|
|
<description>IO port C reset</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOBRST</name>
|
|
<description>IO port B reset</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOARST</name>
|
|
<description>IO port A reset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB3RSTR</name>
|
|
<displayName>AHB3RSTR</displayName>
|
|
<description>AHB3 peripheral reset register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLASHRST</name>
|
|
<description>Flash interface reset</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPCCRST</name>
|
|
<description>IPCC interface reset</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSEMRST</name>
|
|
<description>HSEM interface reset</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RNGRST</name>
|
|
<description>RNG interface reset</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AES2RST</name>
|
|
<description>AES2 interface reset</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PKARST</name>
|
|
<description>PKA interface reset</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>QSPIRST</name>
|
|
<description>Quad SPI memory interface reset</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1RSTR1</name>
|
|
<displayName>APB1RSTR1</displayName>
|
|
<description>APB1 peripheral reset register 1</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM1RST</name>
|
|
<description>Low Power Timer 1 reset</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USBFSRST</name>
|
|
<description>USB FS reset</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRSRST</name>
|
|
<description>CRS reset</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3RST</name>
|
|
<description>I2C3 reset</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1RST</name>
|
|
<description>I2C1 reset</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI2RST</name>
|
|
<description>SPI2 reset</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDRST</name>
|
|
<description>LCD interface reset</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM2RST</name>
|
|
<description>TIM2 timer reset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1RSTR2</name>
|
|
<displayName>APB1RSTR2</displayName>
|
|
<description>APB1 peripheral reset register 2</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM2RST</name>
|
|
<description>Low-power timer 2 reset</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPUART1RST</name>
|
|
<description>Low-power UART 1 reset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB2RSTR</name>
|
|
<displayName>APB2RSTR</displayName>
|
|
<description>APB2 peripheral reset register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SAI1RST</name>
|
|
<description>Serial audio interface 1 (SAI1) reset</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM17RST</name>
|
|
<description>TIM17 timer reset</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM16RST</name>
|
|
<description>TIM16 timer reset</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USART1RST</name>
|
|
<description>USART1 reset</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI1RST</name>
|
|
<description>SPI1 reset</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM1RST</name>
|
|
<description>TIM1 timer reset</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB3RSTR</name>
|
|
<displayName>APB3RSTR</displayName>
|
|
<description>APB3 peripheral reset register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RFRST</name>
|
|
<description>Radio system BLE reset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB1ENR</name>
|
|
<displayName>AHB1ENR</displayName>
|
|
<description>AHB1 peripheral clock enable register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000100</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TSCEN</name>
|
|
<description>Touch Sensing Controller clock enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCEN</name>
|
|
<description>CPU1 CRC clock enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAMUXEN</name>
|
|
<description>DMAMUX clock enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2EN</name>
|
|
<description>DMA2 clock enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1EN</name>
|
|
<description>DMA1 clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB2ENR</name>
|
|
<displayName>AHB2ENR</displayName>
|
|
<description>AHB2 peripheral clock enable register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES1EN</name>
|
|
<description>AES1 accelerator clock enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCEN</name>
|
|
<description>ADC clock enable</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOHEN</name>
|
|
<description>IO port H clock enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOEEN</name>
|
|
<description>IO port E clock enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIODEN</name>
|
|
<description>IO port D clock enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOCEN</name>
|
|
<description>IO port C clock enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOBEN</name>
|
|
<description>IO port B clock enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOAEN</name>
|
|
<description>IO port A clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB3ENR</name>
|
|
<displayName>AHB3ENR</displayName>
|
|
<description>AHB3 peripheral clock enable register</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x02080000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLASHEN</name>
|
|
<description>FLASHEN</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPCCEN</name>
|
|
<description>IPCCEN</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSEMEN</name>
|
|
<description>HSEMEN</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RNGEN</name>
|
|
<description>RNGEN</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AES2EN</name>
|
|
<description>AES2EN</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PKAEN</name>
|
|
<description>PKAEN</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>QSPIEN</name>
|
|
<description>QSPIEN</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1ENR1</name>
|
|
<displayName>APB1ENR1</displayName>
|
|
<description>APB1ENR1</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000400</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM1EN</name>
|
|
<description>CPU1 Low power timer 1 clock enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USBEN</name>
|
|
<description>CPU1 USB clock enable</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRSEN</name>
|
|
<description>CPU1 CRS clock enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3EN</name>
|
|
<description>CPU1 I2C3 clock enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1EN</name>
|
|
<description>CPU1 I2C1 clock enable</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI2EN</name>
|
|
<description>CPU1 SPI2 clock enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WWDGEN</name>
|
|
<description>CPU1 Window watchdog clock enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTCAPBEN</name>
|
|
<description>CPU1 RTC APB clock enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDEN</name>
|
|
<description>CPU1 LCD clock enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM2EN</name>
|
|
<description>CPU1 TIM2 timer clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1ENR2</name>
|
|
<displayName>APB1ENR2</displayName>
|
|
<description>APB1 peripheral clock enable register 2</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM2EN</name>
|
|
<description>CPU1 LPTIM2EN</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPUART1EN</name>
|
|
<description>CPU1 Low power UART 1 clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB2ENR</name>
|
|
<displayName>APB2ENR</displayName>
|
|
<description>APB2ENR</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SAI1EN</name>
|
|
<description>CPU1 SAI1 clock enable</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM17EN</name>
|
|
<description>CPU1 TIM17 timer clock enable</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM16EN</name>
|
|
<description>CPU1 TIM16 timer clock enable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USART1EN</name>
|
|
<description>CPU1 USART1clock enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI1EN</name>
|
|
<description>CPU1 SPI1 clock enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM1EN</name>
|
|
<description>CPU1 TIM1 timer clock enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB1SMENR</name>
|
|
<displayName>AHB1SMENR</displayName>
|
|
<description>AHB1 peripheral clocks enable in Sleep and Stop modes register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00011207</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TSCSMEN</name>
|
|
<description>CPU1 Touch Sensing Controller clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCSMEN</name>
|
|
<description>CPU1 CRCSMEN</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM1SMEN</name>
|
|
<description>CPU1 SRAM1 interface clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAMUXSMEN</name>
|
|
<description>CPU1 DMAMUX clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2SMEN</name>
|
|
<description>CPU1 DMA2 clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1SMEN</name>
|
|
<description>CPU1 DMA1 clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB2SMENR</name>
|
|
<displayName>AHB2SMENR</displayName>
|
|
<description>AHB2 peripheral clocks enable in Sleep and Stop modes register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0001209F</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES1SMEN</name>
|
|
<description>CPU1 AES1 accelerator clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCFSSMEN</name>
|
|
<description>CPU1 ADC clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOHSMEN</name>
|
|
<description>CPU1 IO port H clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOESMEN</name>
|
|
<description>CPU1 IO port E clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIODSMEN</name>
|
|
<description>CPU1 IO port D clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOCSMEN</name>
|
|
<description>CPU1 IO port C clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOBSMEN</name>
|
|
<description>CPU1 IO port B clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOASMEN</name>
|
|
<description>CPU1 IO port A clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AHB3SMENR</name>
|
|
<displayName>AHB3SMENR</displayName>
|
|
<description>AHB3 peripheral clocks enable in Sleep and Stop modes register</description>
|
|
<addressOffset>0x70</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x03070100</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLASHSMEN</name>
|
|
<description>Flash interface clocks enable during CPU1 sleep mode</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM2SMEN</name>
|
|
<description>SRAM2a and SRAM2b memory interface clocks enable during CPU1 sleep mode</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RNGSMEN</name>
|
|
<description>True RNG clocks enable during CPU1 sleep mode</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AES2SMEN</name>
|
|
<description>AES2 accelerator clocks enable during CPU1 sleep mode</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PKASMEN</name>
|
|
<description>PKA accelerator clocks enable during CPU1 sleep mode</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>QSPISMEN</name>
|
|
<description>QSPISMEN</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1SMENR1</name>
|
|
<displayName>APB1SMENR1</displayName>
|
|
<description>APB1SMENR1</description>
|
|
<addressOffset>0x78</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x85A04E01</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM1SMEN</name>
|
|
<description>Low power timer 1 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USBSMEN</name>
|
|
<description>USB FS clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRSMEN</name>
|
|
<description>CRS clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3SMEN</name>
|
|
<description>I2C3 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1SMEN</name>
|
|
<description>I2C1 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI2SMEN</name>
|
|
<description>SPI2 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WWDGSMEN</name>
|
|
<description>Window watchdog clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTCAPBSMEN</name>
|
|
<description>RTC APB clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDSMEN</name>
|
|
<description>LCD clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM2SMEN</name>
|
|
<description>TIM2 timer clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1SMENR2</name>
|
|
<displayName>APB1SMENR2</displayName>
|
|
<description>APB1 peripheral clocks enable in Sleep and Stop modes register 2</description>
|
|
<addressOffset>0x7C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000000021</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM2SMEN</name>
|
|
<description>Low power timer 2 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPUART1SMEN</name>
|
|
<description>Low power UART 1 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB2SMENR</name>
|
|
<displayName>APB2SMENR</displayName>
|
|
<description>APB2SMENR</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00265800</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SAI1SMEN</name>
|
|
<description>SAI1 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM17SMEN</name>
|
|
<description>TIM17 timer clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM16SMEN</name>
|
|
<description>TIM16 timer clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USART1SMEN</name>
|
|
<description>USART1clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI1SMEN</name>
|
|
<description>SPI1 clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM1SMEN</name>
|
|
<description>TIM1 timer clocks enable during CPU1 Sleep mode</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCIPR</name>
|
|
<displayName>CCIPR</displayName>
|
|
<description>CCIPR</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RNGSEL</name>
|
|
<description>RNG clock source selection</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCSEL</name>
|
|
<description>ADCs clock source selection</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CLK48SEL</name>
|
|
<description>48 MHz clock source selection</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SAI1SEL</name>
|
|
<description>SAI1 clock source selection</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPTIM2SEL</name>
|
|
<description>Low power timer 2 clock source selection</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPTIM1SEL</name>
|
|
<description>Low power timer 1 clock source selection</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3SEL</name>
|
|
<description>I2C3 clock source selection</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1SEL</name>
|
|
<description>I2C1 clock source selection</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPUART1SEL</name>
|
|
<description>LPUART1 clock source selection</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USART1SEL</name>
|
|
<description>USART1 clock source selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BDCR</name>
|
|
<displayName>BDCR</displayName>
|
|
<description>BDCR</description>
|
|
<addressOffset>0x90</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LSCOSEL</name>
|
|
<description>Low speed clock output selection</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSCOEN</name>
|
|
<description>Low speed clock output enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BDRST</name>
|
|
<description>Backup domain software reset</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RTCEN</name>
|
|
<description>RTC clock enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RTCSEL</name>
|
|
<description>RTC clock source selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSECSSD_</name>
|
|
<description>CSS on LSE failure detection</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>LSECSSON</name>
|
|
<description>LSECSSON</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSEDRV</name>
|
|
<description>SE oscillator drive capability</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSEBYP</name>
|
|
<description>LSE oscillator bypass</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSERDY</name>
|
|
<description>LSE oscillator ready</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>LSEON</name>
|
|
<description>LSE oscillator enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CSR</name>
|
|
<displayName>CSR</displayName>
|
|
<description>CSR</description>
|
|
<addressOffset>0x94</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x0C000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPWRRSTF</name>
|
|
<description>Low-power reset flag</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>WWDGRSTF</name>
|
|
<description>Window watchdog reset flag</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>IWDGRSTF</name>
|
|
<description>Independent window watchdog reset flag</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SFTRSTF</name>
|
|
<description>Software reset flag</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>BORRSTF</name>
|
|
<description>BOR flag</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PINRSTF</name>
|
|
<description>Pin reset flag</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>OBLRSTF</name>
|
|
<description>Option byte loader reset flag</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>RMVF</name>
|
|
<description>Remove reset flag</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RFWKPSEL</name>
|
|
<description>RF system wakeup clock source selection</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI2BW</name>
|
|
<description>LSI2 oscillator bias configuration</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI2TRIMOK</name>
|
|
<description>LSI2 oscillator trim OK</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI2TRIMEN</name>
|
|
<description>LSI2 oscillator trimming enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI2RDY</name>
|
|
<description>LSI2 oscillator ready</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI2ON</name>
|
|
<description>LSI2 oscillator enabled</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI1RDY</name>
|
|
<description>LSI1 oscillator ready</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>LSI1ON</name>
|
|
<description>LSI1 oscillator enabled</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RFRSTS</name>
|
|
<description>Radio system BLE and 802.15.4 reset status</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CRRCR</name>
|
|
<displayName>CRRCR</displayName>
|
|
<description>Clock recovery RC register</description>
|
|
<addressOffset>0x98</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>HSI48CAL</name>
|
|
<description>HSI48 clock calibration</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSI48RDY</name>
|
|
<description>HSI48 clock ready</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSI48ON</name>
|
|
<description>HSI48 oscillator enabled</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HSECR</name>
|
|
<displayName>HSECR</displayName>
|
|
<description>Clock HSE register</description>
|
|
<addressOffset>0x9C</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000030</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>HSETUNE</name>
|
|
<description>HSE capacitor tuning</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>HSEGMC</name>
|
|
<description>HSE current control</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HSES</name>
|
|
<description>HSE Sense amplifier threshold</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>UNLOCKED</name>
|
|
<description>Register lock system</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EXTCFGR</name>
|
|
<displayName>EXTCFGR</displayName>
|
|
<description>Extended clock recovery register</description>
|
|
<addressOffset>0x108</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00030000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RFCSS</name>
|
|
<description>RF clock source selected</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C2HPREF</name>
|
|
<description>CPU2 AHB prescaler flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SHDHPREF</name>
|
|
<description>Shared AHB prescaler flag</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C2HPRE</name>
|
|
<description>CPU2 AHB prescaler</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SHDHPRE</name>
|
|
<description>Shared AHB prescaler</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AHB1ENR</name>
|
|
<displayName>C2AHB1ENR</displayName>
|
|
<description>CPU2 AHB1 peripheral clock enable register</description>
|
|
<addressOffset>0x148</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TSCEN</name>
|
|
<description>CPU2 Touch Sensing Controller clock enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCEN</name>
|
|
<description>CPU2 CRC clock enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM1EN</name>
|
|
<description>CPU2 SRAM1 clock enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAMUXEN</name>
|
|
<description>CPU2 DMAMUX clock enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2EN</name>
|
|
<description>CPU2 DMA2 clock enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1EN</name>
|
|
<description>CPU2 DMA1 clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AHB2ENR</name>
|
|
<displayName>C2AHB2ENR</displayName>
|
|
<description>CPU2 AHB2 peripheral clock enable register</description>
|
|
<addressOffset>0x14C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES1EN</name>
|
|
<description>CPU2 AES1 accelerator clock enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCEN</name>
|
|
<description>CPU2 ADC clock enable</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOHEN</name>
|
|
<description>CPU2 IO port H clock enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOEEN</name>
|
|
<description>CPU2 IO port E clock enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIODEN</name>
|
|
<description>CPU2 IO port D clock enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOCEN</name>
|
|
<description>CPU2 IO port C clock enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOBEN</name>
|
|
<description>CPU2 IO port B clock enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOAEN</name>
|
|
<description>CPU2 IO port A clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AHB3ENR</name>
|
|
<displayName>C2AHB3ENR</displayName>
|
|
<description>CPU2 AHB3 peripheral clock enable register</description>
|
|
<addressOffset>0x150</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x02080000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLASHEN</name>
|
|
<description>CPU2 FLASHEN</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPCCEN</name>
|
|
<description>CPU2 IPCCEN</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HSEMEN</name>
|
|
<description>CPU2 HSEMEN</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RNGEN</name>
|
|
<description>CPU2 RNGEN</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AES2EN</name>
|
|
<description>CPU2 AES2EN</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PKAEN</name>
|
|
<description>CPU2 PKAEN</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB1ENR1</name>
|
|
<displayName>C2APB1ENR1</displayName>
|
|
<description>CPU2 APB1ENR1</description>
|
|
<addressOffset>0x158</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000400</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM1EN</name>
|
|
<description>CPU2 Low power timer 1 clock enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USBEN</name>
|
|
<description>CPU2 USB clock enable</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRSEN</name>
|
|
<description>CPU2 CRS clock enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3EN</name>
|
|
<description>CPU2 I2C3 clock enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1EN</name>
|
|
<description>CPU2 I2C1 clock enable</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI2EN</name>
|
|
<description>CPU2 SPI2 clock enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTCAPBEN</name>
|
|
<description>CPU2 RTC APB clock enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDEN</name>
|
|
<description>CPU2 LCD clock enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM2EN</name>
|
|
<description>CPU2 TIM2 timer clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB1ENR2</name>
|
|
<displayName>C2APB1ENR2</displayName>
|
|
<description>CPU2 APB1 peripheral clock enable register 2</description>
|
|
<addressOffset>0x15C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM2EN</name>
|
|
<description>CPU2 LPTIM2EN</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPUART1EN</name>
|
|
<description>CPU2 Low power UART 1 clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB2ENR</name>
|
|
<displayName>C2APB2ENR</displayName>
|
|
<description>CPU2 APB2ENR</description>
|
|
<addressOffset>0x160</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SAI1EN</name>
|
|
<description>CPU2 SAI1 clock enable</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM17EN</name>
|
|
<description>CPU2 TIM17 timer clock enable</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM16EN</name>
|
|
<description>CPU2 TIM16 timer clock enable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USART1EN</name>
|
|
<description>CPU2 USART1clock enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI1EN</name>
|
|
<description>CPU2 SPI1 clock enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM1EN</name>
|
|
<description>CPU2 TIM1 timer clock enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB3ENR</name>
|
|
<displayName>C2APB3ENR</displayName>
|
|
<description>CPU2 APB3ENR</description>
|
|
<addressOffset>0x164</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EN802</name>
|
|
<description>CPU2 802.15.4 interface clock enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLEEN</name>
|
|
<description>CPU2 BLE interface clock enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AHB1SMENR</name>
|
|
<displayName>C2AHB1SMENR</displayName>
|
|
<description>CPU2 AHB1 peripheral clocks enable in Sleep and Stop modes register</description>
|
|
<addressOffset>0x168</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00011207</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TSCSMEN</name>
|
|
<description>CPU2 Touch Sensing Controller clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCSMEN</name>
|
|
<description>CPU2 CRCSMEN</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM1SMEN</name>
|
|
<description>SRAM1 interface clock enable during CPU1 CSleep mode</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAMUXSMEN</name>
|
|
<description>CPU2 DMAMUX clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2SMEN</name>
|
|
<description>CPU2 DMA2 clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1SMEN</name>
|
|
<description>CPU2 DMA1 clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AHB2SMENR</name>
|
|
<displayName>C2AHB2SMENR</displayName>
|
|
<description>CPU2 AHB2 peripheral clocks enable in Sleep and Stop modes register</description>
|
|
<addressOffset>0x16C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0001209F</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES1SMEN</name>
|
|
<description>CPU2 AES1 accelerator clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCFSSMEN</name>
|
|
<description>CPU2 ADC clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOHSMEN</name>
|
|
<description>CPU2 IO port H clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOESMEN</name>
|
|
<description>CPU2 IO port E clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIODSMEN</name>
|
|
<description>CPU2 IO port D clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOCSMEN</name>
|
|
<description>CPU2 IO port C clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOBSMEN</name>
|
|
<description>CPU2 IO port B clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GPIOASMEN</name>
|
|
<description>CPU2 IO port A clocks enable during Sleep and Stop modes</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AHB3SMENR</name>
|
|
<displayName>C2AHB3SMENR</displayName>
|
|
<description>CPU2 AHB3 peripheral clocks enable in Sleep and Stop modes register</description>
|
|
<addressOffset>0x170</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x03070000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLASHSMEN</name>
|
|
<description>Flash interface clocks enable during CPU2 sleep modes</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRAM2SMEN</name>
|
|
<description>SRAM2a and SRAM2b memory interface clocks enable during CPU2 sleep modes</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RNGSMEN</name>
|
|
<description>True RNG clocks enable during CPU2 sleep modes</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AES2SMEN</name>
|
|
<description>AES2 accelerator clocks enable during CPU2 sleep modes</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PKASMEN</name>
|
|
<description>PKA accelerator clocks enable during CPU2 sleep modes</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB1SMENR1</name>
|
|
<displayName>C2APB1SMENR1</displayName>
|
|
<description>CPU2 APB1SMENR1</description>
|
|
<addressOffset>0x178</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x85A04601</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM1SMEN</name>
|
|
<description>Low power timer 1 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USBSMEN</name>
|
|
<description>USB FS clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRSMEN</name>
|
|
<description>CRS clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3SMEN</name>
|
|
<description>I2C3 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1SMEN</name>
|
|
<description>I2C1 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI2SMEN</name>
|
|
<description>SPI2 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTCAPBSMEN</name>
|
|
<description>RTC APB clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDSMEN</name>
|
|
<description>LCD clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM2SMEN</name>
|
|
<description>TIM2 timer clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB1SMENR2</name>
|
|
<displayName>C2APB1SMENR2</displayName>
|
|
<description>CPU2 APB1 peripheral clocks enable in Sleep and Stop modes register 2</description>
|
|
<addressOffset>0x17C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000000021</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPTIM2SMEN</name>
|
|
<description>Low power timer 2 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPUART1SMEN</name>
|
|
<description>Low power UART 1 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB2SMENR</name>
|
|
<displayName>C2APB2SMENR</displayName>
|
|
<description>CPU2 APB2SMENR</description>
|
|
<addressOffset>0x180</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00265800</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SAI1SMEN</name>
|
|
<description>SAI1 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM17SMEN</name>
|
|
<description>TIM17 timer clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM16SMEN</name>
|
|
<description>TIM16 timer clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USART1SMEN</name>
|
|
<description>USART1clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPI1SMEN</name>
|
|
<description>SPI1 clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM1SMEN</name>
|
|
<description>TIM1 timer clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB3SMENR</name>
|
|
<displayName>C2APB3SMENR</displayName>
|
|
<description>CPU2 APB3SMENR</description>
|
|
<addressOffset>0x184</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000003</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SMEN802</name>
|
|
<description>802.15.4 interface clocks enable during CPU2 Sleep modes</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLESMEN</name>
|
|
<description>BLE interface clocks enable during CPU2 Sleep mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>PWR</name>
|
|
<description>Power control</description>
|
|
<groupName>PWR</groupName>
|
|
<baseAddress>0x58000400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>PWR_SOTF</name>
|
|
<description>PWR switching on the fly
|
|
interrupt</description>
|
|
<value>43</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>Power control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000200</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPR</name>
|
|
<description>Low-power run</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VOS</name>
|
|
<description>Voltage scaling range selection</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBP</name>
|
|
<description>Disable backup domain write protection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FPDS</name>
|
|
<description>Flash power down mode during LPsSleep for CPU1</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FPDR</name>
|
|
<description>Flash power down mode during LPRun for CPU1</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPMS</name>
|
|
<description>Low-power mode selection for CPU1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>Power control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>USV</name>
|
|
<description>VDDUSB USB supply valid</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVME3</name>
|
|
<description>Peripheral voltage monitoring 3 enable: VDDA vs. 1.62V</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVME1</name>
|
|
<description>Peripheral voltage monitoring 1 enable: VDDUSB vs. 1.2V</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PLS</name>
|
|
<description>Power voltage detector level selection</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVDE</name>
|
|
<description>Power voltage detector enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR3</name>
|
|
<displayName>CR3</displayName>
|
|
<description>Power control register 3</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00008000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EIWUL</name>
|
|
<description>Enable internal wakeup line for CPU1</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EC2H</name>
|
|
<description>Enable CPU2 Hold interrupt for CPU1</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>E802A</name>
|
|
<description>Enable end of activity interrupt for CPU1</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EBLEA</name>
|
|
<description>Enable BLE end of activity interrupt for CPU1</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ECRPE</name>
|
|
<description>Enable critical radio phase end of activity interrupt for CPU1</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>APC</name>
|
|
<description>Apply pull-up and pull-down configuration</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RRS</name>
|
|
<description>SRAM2a retention in Standby mode</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EBORHSDFB</name>
|
|
<description>Enable BORH and Step Down counverter forced in Bypass interrups for CPU1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP5</name>
|
|
<description>Enable Wakeup pin WKUP5</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP4</name>
|
|
<description>Enable Wakeup pin WKUP4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP3</name>
|
|
<description>Enable Wakeup pin WKUP3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP2</name>
|
|
<description>Enable Wakeup pin WKUP2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP1</name>
|
|
<description>Enable Wakeup pin WKUP1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR4</name>
|
|
<displayName>CR4</displayName>
|
|
<description>Power control register 4</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>C2BOOT</name>
|
|
<description>BOOT CPU2 after reset or wakeup from Stop or Standby modes</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VBRS</name>
|
|
<description>VBAT battery charging resistor selection</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VBE</name>
|
|
<description>VBAT battery charging enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WP5</name>
|
|
<description>Wakeup pin WKUP5 polarity</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WP4</name>
|
|
<description>Wakeup pin WKUP4 polarity</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WP3</name>
|
|
<description>Wakeup pin WKUP3 polarity</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WP2</name>
|
|
<description>Wakeup pin WKUP2 polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WP1</name>
|
|
<description>Wakeup pin WKUP1 polarity</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR1</name>
|
|
<displayName>SR1</displayName>
|
|
<description>Power status register 1</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WUFI</name>
|
|
<description>Internal Wakeup interrupt flag</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C2HF</name>
|
|
<description>CPU2 Hold interrupt flag</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AF802</name>
|
|
<description>802.15.4 end of activity interrupt flag</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLEAF</name>
|
|
<description>BLE end of activity interrupt flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRPEF</name>
|
|
<description>Enable critical radio phase end of activity interrupt flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUF802</name>
|
|
<description>802.15.4 wakeup interrupt flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLEWUF</name>
|
|
<description>BLE wakeup interrupt flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BORHF</name>
|
|
<description>BORH interrupt flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDFBF</name>
|
|
<description>Step Down converter forced in Bypass interrupt flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF5</name>
|
|
<description>Wakeup flag 5</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF4</name>
|
|
<description>Wakeup flag 4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF3</name>
|
|
<description>Wakeup flag 3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF2</name>
|
|
<description>Wakeup flag 2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF1</name>
|
|
<description>Wakeup flag 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR2</name>
|
|
<displayName>SR2</displayName>
|
|
<description>Power status register 2</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000002</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PVMO3</name>
|
|
<description>Peripheral voltage monitoring output: VDDA vs. 1.62 V</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVMO1</name>
|
|
<description>Peripheral voltage monitoring output: VDDUSB vs. 1.2 V</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVDO</name>
|
|
<description>Power voltage detector output</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VOSF</name>
|
|
<description>Voltage scaling flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>REGLPF</name>
|
|
<description>Low-power regulator flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>REGLPS</name>
|
|
<description>Low-power regulator started</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDSMPSF</name>
|
|
<description>Step Down converter SMPS mode flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDBF</name>
|
|
<description>Step Down converter Bypass mode flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SCR</name>
|
|
<displayName>SCR</displayName>
|
|
<description>Power status clear register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC2HF</name>
|
|
<description>Clear CPU2 Hold interrupt flag</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C802AF</name>
|
|
<description>Clear 802.15.4 end of activity interrupt flag</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CBLEAF</name>
|
|
<description>Clear BLE end of activity interrupt flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCRPEF</name>
|
|
<description>Clear critical radio phase end of activity interrupt flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C802WUF</name>
|
|
<description>Clear 802.15.4 wakeup interrupt flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CBLEWUF</name>
|
|
<description>Clear BLE wakeup interrupt flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CBORHF</name>
|
|
<description>Clear BORH interrupt flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CSMPSFBF</name>
|
|
<description>Clear SMPS Step Down converter forced in Bypass interrupt flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF5</name>
|
|
<description>Clear wakeup flag 5</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF4</name>
|
|
<description>Clear wakeup flag 4</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF3</name>
|
|
<description>Clear wakeup flag 3</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF2</name>
|
|
<description>Clear wakeup flag 2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CWUF1</name>
|
|
<description>Clear wakeup flag 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR5</name>
|
|
<displayName>CR5</displayName>
|
|
<description>Power control register 5</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00004270</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SDEB</name>
|
|
<description>Enable Step Down converter SMPS mode enabled</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDBEN</name>
|
|
<description>Enable Step Down converter Bypass mode enabled</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMPSCFG</name>
|
|
<description>VOS configuration selection (non user)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BORHC</name>
|
|
<description>BORH configuration selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDSC</name>
|
|
<description>Step Down converter supplt startup current selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SDVOS</name>
|
|
<description>Step Down converter voltage output scaling</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUCRA</name>
|
|
<displayName>PUCRA</displayName>
|
|
<description>Power Port A pull-up control register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PU15</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU13</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU12</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU11</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU10</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU9</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU8</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU7</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU6</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU5</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU4</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU3</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU2</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU1</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU0</name>
|
|
<description>Port A pull-up bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDCRA</name>
|
|
<displayName>PDCRA</displayName>
|
|
<description>Power Port A pull-down control register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PD14</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD12</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD11</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD10</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD9</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD8</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD7</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD6</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD5</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD4</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD3</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD2</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD1</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD0</name>
|
|
<description>Port A pull-down bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUCRB</name>
|
|
<displayName>PUCRB</displayName>
|
|
<description>Power Port B pull-up control register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PU15</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU14</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU13</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU12</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU11</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU10</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU9</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU8</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU7</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU6</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU5</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU4</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU3</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU2</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU1</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU0</name>
|
|
<description>Port B pull-up bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDCRB</name>
|
|
<displayName>PDCRB</displayName>
|
|
<description>Power Port B pull-down control register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PD15</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD14</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD13</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD12</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD11</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD10</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD9</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD8</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD7</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD6</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD5</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD3</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD2</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD1</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD0</name>
|
|
<description>Port B pull-down bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUCRC</name>
|
|
<displayName>PUCRC</displayName>
|
|
<description>Power Port C pull-up control register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PU15</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU14</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU13</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU12</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU11</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU10</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU9</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU8</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU7</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU6</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU5</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU4</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU3</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU2</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU1</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU0</name>
|
|
<description>Port C pull-up bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDCRC</name>
|
|
<displayName>PDCRC</displayName>
|
|
<description>Power Port C pull-down control register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PD15</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD14</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD13</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD12</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD11</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD10</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD9</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD8</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD7</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD6</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD5</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD4</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD3</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD2</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD1</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD0</name>
|
|
<description>Port C pull-down bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUCRD</name>
|
|
<displayName>PUCRD</displayName>
|
|
<description>Power Port D pull-up control register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PU15</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU14</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU13</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU12</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU11</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU10</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU9</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU8</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU7</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU6</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU5</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU4</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU3</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU2</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU1</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU0</name>
|
|
<description>Port D pull-up bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDCRD</name>
|
|
<displayName>PDCRD</displayName>
|
|
<description>Power Port D pull-down control register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PD15</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD14</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD13</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD12</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD11</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD10</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD9</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD8</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD7</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD6</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD5</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD4</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD3</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD2</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD1</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD0</name>
|
|
<description>Port D pull-down bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUCRE</name>
|
|
<displayName>PUCRE</displayName>
|
|
<description>Power Port E pull-up control register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PU4</name>
|
|
<description>Port E pull-up bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU3</name>
|
|
<description>Port E pull-up bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU2</name>
|
|
<description>Port E pull-up bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU1</name>
|
|
<description>Port E pull-up bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU0</name>
|
|
<description>Port E pull-up bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDCRE</name>
|
|
<displayName>PDCRE</displayName>
|
|
<description>Power Port E pull-down control register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PD4</name>
|
|
<description>Port E pull-down bit y (y=0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD3</name>
|
|
<description>Port E pull-down bit y (y=0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD2</name>
|
|
<description>Port E pull-down bit y (y=0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD1</name>
|
|
<description>Port E pull-down bit y (y=0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD0</name>
|
|
<description>Port E pull-down bit y (y=0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUCRH</name>
|
|
<displayName>PUCRH</displayName>
|
|
<description>Power Port H pull-up control register</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PU3</name>
|
|
<description>Port H pull-up bit y (y=0..1)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU1</name>
|
|
<description>Port H pull-up bit y (y=0..1)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PU0</name>
|
|
<description>Port H pull-up bit y (y=0..1)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDCRH</name>
|
|
<displayName>PDCRH</displayName>
|
|
<description>Power Port H pull-down control register</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PD3</name>
|
|
<description>Port H pull-down bit y (y=0..1)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD1</name>
|
|
<description>Port H pull-down bit y (y=0..1)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PD0</name>
|
|
<description>Port H pull-down bit y (y=0..1)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2CR1</name>
|
|
<displayName>C2CR1</displayName>
|
|
<description>CPU2 Power control register 1</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EWKUP802</name>
|
|
<description>802.15.4 external wakeup signal</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BLEEWKUP</name>
|
|
<description>BLE external wakeup signal</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FPDS</name>
|
|
<description>Flash power down mode during LPSleep for CPU2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FPDR</name>
|
|
<description>Flash power down mode during LPRun for CPU2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPMS</name>
|
|
<description>Low-power mode selection for CPU2</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2CR3</name>
|
|
<displayName>C2CR3</displayName>
|
|
<description>CPU2 Power control register 3</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00008000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EIWUL</name>
|
|
<description>Enable internal wakeup line for CPU2</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>APC</name>
|
|
<description>Apply pull-up and pull-down configuration for CPU2</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>E802WUP</name>
|
|
<description>Enable 802.15.4 host wakeup interrupt for CPU2</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EBLEWUP</name>
|
|
<description>Enable BLE host wakeup interrupt for CPU2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP5</name>
|
|
<description>Enable Wakeup pin WKUP5 for CPU2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP4</name>
|
|
<description>Enable Wakeup pin WKUP4 for CPU2</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP3</name>
|
|
<description>Enable Wakeup pin WKUP3 for CPU2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP2</name>
|
|
<description>Enable Wakeup pin WKUP2 for CPU2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EWUP1</name>
|
|
<description>Enable Wakeup pin WKUP1 for CPU2</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EXTSCR</name>
|
|
<displayName>EXTSCR</displayName>
|
|
<description>Power status clear register</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>C2DS</name>
|
|
<description>CPU2 deepsleep mode</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C1DS</name>
|
|
<description>CPU1 deepsleep mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>CRPF</name>
|
|
<description>Critical Radio system phase</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C2STOPF</name>
|
|
<description>System Stop flag for CPU2</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C2SBF</name>
|
|
<description>System Standby flag for CPU2</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C1STOPF</name>
|
|
<description>System Stop flag for CPU1</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C1SBF</name>
|
|
<description>System Standby flag for CPU1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>CCRPF</name>
|
|
<description>Clear Critical Radio system phase</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C2CSSF</name>
|
|
<description>Clear CPU2 Stop Standby flags</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
<field>
|
|
<name>C1CSSF</name>
|
|
<description>Clear CPU1 Stop Standby flags</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>SYSCFG_VREFBUF</name>
|
|
<description>SYSCFG_VREFBUF</description>
|
|
<groupName>SYSCFG_VREFBUF</groupName>
|
|
<baseAddress>0x40010000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x200</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>SYSCFG_MEMRMP</name>
|
|
<displayName>SYSCFG_MEMRMP</displayName>
|
|
<description>memory remap register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEM_MODE</name>
|
|
<description>Memory mapping selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_CFGR1</name>
|
|
<displayName>SYSCFG_CFGR1</displayName>
|
|
<description>configuration register 1</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x7C000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FPU_IE</name>
|
|
<description>Floating Point Unit interrupts enable bits</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C3_FMP</name>
|
|
<description>I2C3 Fast-mode Plus driving capability activation</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C1_FMP</name>
|
|
<description>I2C1 Fast-mode Plus driving capability activation</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C_PB9_FMP</name>
|
|
<description>Fast-mode Plus (Fm+) driving capability activation on PB9</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C_PB8_FMP</name>
|
|
<description>Fast-mode Plus (Fm+) driving capability activation on PB8</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C_PB7_FMP</name>
|
|
<description>Fast-mode Plus (Fm+) driving capability activation on PB7</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>I2C_PB6_FMP</name>
|
|
<description>Fast-mode Plus (Fm+) driving capability activation on PB6</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BOOSTEN</name>
|
|
<description>I/O analog switch voltage booster enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_EXTICR1</name>
|
|
<displayName>SYSCFG_EXTICR1</displayName>
|
|
<description>external interrupt configuration register 1</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EXTI3</name>
|
|
<description>EXTI 3 configuration bits</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI2</name>
|
|
<description>EXTI 2 configuration bits</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI1</name>
|
|
<description>EXTI 1 configuration bits</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI0</name>
|
|
<description>EXTI 0 configuration bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_EXTICR2</name>
|
|
<displayName>SYSCFG_EXTICR2</displayName>
|
|
<description>external interrupt configuration register 2</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EXTI7</name>
|
|
<description>EXTI 7 configuration bits</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI6</name>
|
|
<description>EXTI 6 configuration bits</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI5</name>
|
|
<description>EXTI 5 configuration bits</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI4</name>
|
|
<description>EXTI 4 configuration bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_EXTICR3</name>
|
|
<displayName>SYSCFG_EXTICR3</displayName>
|
|
<description>external interrupt configuration register 3</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EXTI11</name>
|
|
<description>EXTI 11 configuration bits</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI10</name>
|
|
<description>EXTI 10 configuration bits</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI9</name>
|
|
<description>EXTI 9 configuration bits</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI8</name>
|
|
<description>EXTI 8 configuration bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_EXTICR4</name>
|
|
<displayName>SYSCFG_EXTICR4</displayName>
|
|
<description>external interrupt configuration register 4</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EXTI15</name>
|
|
<description>EXTI15 configuration bits</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI14</name>
|
|
<description>EXTI14 configuration bits</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI13</name>
|
|
<description>EXTI13 configuration bits</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTI12</name>
|
|
<description>EXTI12 configuration bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_SCSR</name>
|
|
<displayName>SYSCFG_SCSR</displayName>
|
|
<description>SCSR</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SRAM2BSY</name>
|
|
<description>SRAM2 busy by erase operation</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SRAM2ER</name>
|
|
<description>SRAM2 Erase</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>C2RFD</name>
|
|
<description>CPU2 SRAM fetch (execution) disable.</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_CFGR2</name>
|
|
<displayName>SYSCFG_CFGR2</displayName>
|
|
<description>CFGR2</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SPF</name>
|
|
<description>SRAM2 parity error flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>ECCL</name>
|
|
<description>ECC Lock</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PVDL</name>
|
|
<description>PVD lock enable bit</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SPL</name>
|
|
<description>SRAM2 parity lock bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
<field>
|
|
<name>CLL</name>
|
|
<description>Cortex-M4 LOCKUP (Hardfault) output enable bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>write-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_SWPR</name>
|
|
<displayName>SYSCFG_SWPR</displayName>
|
|
<description>SRAM2 write protection register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>P31WP</name>
|
|
<description>SRAM2 page 31 write protection</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P30WP</name>
|
|
<description>P30WP</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P29WP</name>
|
|
<description>P29WP</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P28WP</name>
|
|
<description>P28WP</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P27WP</name>
|
|
<description>P27WP</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P26WP</name>
|
|
<description>P26WP</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P25WP</name>
|
|
<description>P25WP</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P24WP</name>
|
|
<description>P24WP</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P23WP</name>
|
|
<description>P23WP</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P22WP</name>
|
|
<description>P22WP</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P21WP</name>
|
|
<description>P21WP</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P20WP</name>
|
|
<description>P20WP</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P19WP</name>
|
|
<description>P19WP</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P18WP</name>
|
|
<description>P18WP</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P17WP</name>
|
|
<description>P17WP</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P16WP</name>
|
|
<description>P16WP</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P15WP</name>
|
|
<description>P15WP</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P14WP</name>
|
|
<description>P14WP</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P13WP</name>
|
|
<description>P13WP</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P12WP</name>
|
|
<description>P12WP</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P11WP</name>
|
|
<description>P11WP</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P10WP</name>
|
|
<description>P10WP</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P9WP</name>
|
|
<description>P9WP</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P8WP</name>
|
|
<description>P8WP</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P7WP</name>
|
|
<description>P7WP</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P6WP</name>
|
|
<description>P6WP</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P5WP</name>
|
|
<description>P5WP</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P4WP</name>
|
|
<description>P4WP</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P3WP</name>
|
|
<description>P3WP</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P2WP</name>
|
|
<description>P2WP</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P1WP</name>
|
|
<description>P1WP</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P0WP</name>
|
|
<description>P0WP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_SKR</name>
|
|
<displayName>SYSCFG_SKR</displayName>
|
|
<description>SKR</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>KEY</name>
|
|
<description>SRAM2 write protection key for software erase</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_SWPR2</name>
|
|
<displayName>SYSCFG_SWPR2</displayName>
|
|
<description>SRAM2 write protection register 2</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>P63WP</name>
|
|
<description>SRAM2 page 63 write protection</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P62WP</name>
|
|
<description>P62WP</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P61WP</name>
|
|
<description>P61WP</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P60WP</name>
|
|
<description>P60WP</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P59WP</name>
|
|
<description>P59WP</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P58WP</name>
|
|
<description>P58WP</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P57WP</name>
|
|
<description>P57WP</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P56WP</name>
|
|
<description>P56WP</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P55WP</name>
|
|
<description>P55WP</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P54WP</name>
|
|
<description>P54WP</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P53WP</name>
|
|
<description>P53WP</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P52WP</name>
|
|
<description>P52WP</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P51WP</name>
|
|
<description>P51WP</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P50WP</name>
|
|
<description>P50WP</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P49WP</name>
|
|
<description>P49WP</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P48WP</name>
|
|
<description>P48WP</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P47WP</name>
|
|
<description>P47WP</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P46WP</name>
|
|
<description>P46WP</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P45WP</name>
|
|
<description>P45WP</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P44WP</name>
|
|
<description>P44WP</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P43WP</name>
|
|
<description>P43WP</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P42WP</name>
|
|
<description>P42WP</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P41WP</name>
|
|
<description>P41WP</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P40WP</name>
|
|
<description>P40WP</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P39WP</name>
|
|
<description>P39WP</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P38WP</name>
|
|
<description>P38WP</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P37WP</name>
|
|
<description>P37WP</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P36WP</name>
|
|
<description>P36WP</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P35WP</name>
|
|
<description>P35WP</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P34WP</name>
|
|
<description>P34WP</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P33WP</name>
|
|
<description>P33WP</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>P32WP</name>
|
|
<description>P32WP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VREFBUF_CSR</name>
|
|
<displayName>VREFBUF_CSR</displayName>
|
|
<description>VREF control and status register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000002</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ENVR</name>
|
|
<description>Voltage reference buffer enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>HIZ</name>
|
|
<description>High impedance mode</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>VRS</name>
|
|
<description>Voltage reference scale</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>VRR</name>
|
|
<description>Voltage reference buffer ready</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VREFBUF_CCR</name>
|
|
<displayName>VREFBUF_CCR</displayName>
|
|
<description>calibration control register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TRIM</name>
|
|
<description>Trimming code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_IMR1</name>
|
|
<displayName>SYSCFG_IMR1</displayName>
|
|
<description>CPU1 interrupt mask register 1</description>
|
|
<addressOffset>0x100</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TIM1IM</name>
|
|
<description>Peripheral TIM1 interrupt mask to CPU1</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM16IM</name>
|
|
<description>Peripheral TIM16 interrupt mask to CPU1</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIM17IM</name>
|
|
<description>Peripheral TIM17 interrupt mask to CPU1</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT5IM</name>
|
|
<description>Peripheral EXIT5 interrupt mask to CPU1</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT6IM</name>
|
|
<description>Peripheral EXIT6 interrupt mask to CPU1</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT7IM</name>
|
|
<description>Peripheral EXIT7 interrupt mask to CPU1</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT8IM</name>
|
|
<description>Peripheral EXIT8 interrupt mask to CPU1</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT9IM</name>
|
|
<description>Peripheral EXIT9 interrupt mask to CPU1</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT10IM</name>
|
|
<description>Peripheral EXIT10 interrupt mask to CPU1</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT11IM</name>
|
|
<description>Peripheral EXIT11 interrupt mask to CPU1</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT12IM</name>
|
|
<description>Peripheral EXIT12 interrupt mask to CPU1</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT13IM</name>
|
|
<description>Peripheral EXIT13 interrupt mask to CPU1</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT14IM</name>
|
|
<description>Peripheral EXIT14 interrupt mask to CPU1</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXIT15IM</name>
|
|
<description>Peripheral EXIT15 interrupt mask to CPU1</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_IMR2</name>
|
|
<displayName>SYSCFG_IMR2</displayName>
|
|
<description>CPU1 interrupt mask register 2</description>
|
|
<addressOffset>0x104</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PVM3IM</name>
|
|
<description>Peripheral PVM3 interrupt mask to CPU1</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVM1IM</name>
|
|
<description>Peripheral PVM1 interrupt mask to CPU1</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVDIM</name>
|
|
<description>Peripheral PVD interrupt mask to CPU1</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_C2IMR1</name>
|
|
<displayName>SYSCFG_C2IMR1</displayName>
|
|
<description>CPU2 interrupt mask register 1</description>
|
|
<addressOffset>0x108</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RTCSTAMP</name>
|
|
<description>Peripheral RTCSTAMP interrupt mask to CPU2</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTCWKUP</name>
|
|
<description>Peripheral RTCWKUP interrupt mask to CPU2</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTCALARM</name>
|
|
<description>Peripheral RTCALARM interrupt mask to CPU2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RCC</name>
|
|
<description>Peripheral RCC interrupt mask to CPU2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FLASH</name>
|
|
<description>Peripheral FLASH interrupt mask to CPU2</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PKA</name>
|
|
<description>Peripheral PKA interrupt mask to CPU2</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RNG</name>
|
|
<description>Peripheral RNG interrupt mask to CPU2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AES1</name>
|
|
<description>Peripheral AES1 interrupt mask to CPU2</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMP</name>
|
|
<description>Peripheral COMP interrupt mask to CPU2</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADC</name>
|
|
<description>Peripheral ADC interrupt mask to CPU2</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_C2IMR2</name>
|
|
<displayName>SYSCFG_C2IMR2</displayName>
|
|
<description>CPU2 interrupt mask register 1</description>
|
|
<addressOffset>0x10C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DMA1_CH1_IM</name>
|
|
<description>Peripheral DMA1 CH1 interrupt mask to CPU2</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1_CH2_IM</name>
|
|
<description>Peripheral DMA1 CH2 interrupt mask to CPU2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1_CH3_IM</name>
|
|
<description>Peripheral DMA1 CH3 interrupt mask to CPU2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1_CH4_IM</name>
|
|
<description>Peripheral DMA1 CH4 interrupt mask to CPU2</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1_CH5_IM</name>
|
|
<description>Peripheral DMA1 CH5 interrupt mask to CPU2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1_CH6_IM</name>
|
|
<description>Peripheral DMA1 CH6 interrupt mask to CPU2</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA1_CH7_IM</name>
|
|
<description>Peripheral DMA1 CH7 interrupt mask to CPU2</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH1_IM</name>
|
|
<description>Peripheral DMA2 CH1 interrupt mask to CPU1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH2_IM</name>
|
|
<description>Peripheral DMA2 CH2 interrupt mask to CPU1</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH3_IM</name>
|
|
<description>Peripheral DMA2 CH3 interrupt mask to CPU1</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH4_IM</name>
|
|
<description>Peripheral DMA2 CH4 interrupt mask to CPU1</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH5_IM</name>
|
|
<description>Peripheral DMA2 CH5 interrupt mask to CPU1</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH6_IM</name>
|
|
<description>Peripheral DMA2 CH6 interrupt mask to CPU1</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMA2_CH7_IM</name>
|
|
<description>Peripheral DMA2 CH7 interrupt mask to CPU1</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAM_UX1_IM</name>
|
|
<description>Peripheral DMAM UX1 interrupt mask to CPU1</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVM1IM</name>
|
|
<description>Peripheral PVM1IM interrupt mask to CPU1</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVM3IM</name>
|
|
<description>Peripheral PVM3IM interrupt mask to CPU1</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PVDIM</name>
|
|
<description>Peripheral PVDIM interrupt mask to CPU1</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TSCIM</name>
|
|
<description>Peripheral TSCIM interrupt mask to CPU1</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCDIM</name>
|
|
<description>Peripheral LCDIM interrupt mask to CPU1</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SYSCFG_SIPCR</name>
|
|
<displayName>SYSCFG_SIPCR</displayName>
|
|
<description>secure IP control register</description>
|
|
<addressOffset>0x110</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SAES1</name>
|
|
<description>Enable AES1 KEY[7:0] security.</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SAES2</name>
|
|
<description>Enable AES2 security.</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPKA</name>
|
|
<description>Enable PKA security</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRNG</name>
|
|
<description>Enable True RNG security</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>COMP</name>
|
|
<description>Comparator instance 1</description>
|
|
<groupName>COMP</groupName>
|
|
<baseAddress>0x40010200</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x9</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>COMP</name>
|
|
<description>COMP2 & COMP1 interrupt through
|
|
AIEC[21:20]</description>
|
|
<value>22</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>COMP1_CSR</name>
|
|
<displayName>COMP1_CSR</displayName>
|
|
<description>Comparator control and status register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COMP1_EN</name>
|
|
<description>Comparator enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_PWRMODE</name>
|
|
<description>Comparator power mode</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_INMSEL</name>
|
|
<description>Comparator input minus selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_INPSEL</name>
|
|
<description>Comparator input plus selection</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_POLARITY</name>
|
|
<description>Comparator output polarity</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_HYST</name>
|
|
<description>Comparator hysteresis</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_BLANKING</name>
|
|
<description>Comparator blanking source</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_BRGEN</name>
|
|
<description>Comparator voltage scaler enable</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_SCALEN</name>
|
|
<description>Comparator scaler bridge enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_INMESEL</name>
|
|
<description>Comparator input minus extended selection</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_VALUE</name>
|
|
<description>Comparator output level</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP1_LOCK</name>
|
|
<description>Comparator lock</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COMP2_CSR</name>
|
|
<displayName>COMP2_CSR</displayName>
|
|
<description>Comparator 2 control and status register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COMP2_EN</name>
|
|
<description>Comparator 2 enable bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_PWRMODE</name>
|
|
<description>Power Mode of the comparator 2</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_INMSEL</name>
|
|
<description>Comparator 2 input minus selection bits</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_INPSEL</name>
|
|
<description>Comparator 1 input plus selection bit</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_WINMODE</name>
|
|
<description>Windows mode selection bit</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_POLARITY</name>
|
|
<description>Comparator 2 polarity selection bit</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_HYST</name>
|
|
<description>Comparator 2 hysteresis selection bits</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_BLANKING</name>
|
|
<description>Comparator 2 blanking source selection bits</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_BRGEN</name>
|
|
<description>Scaler bridge enable</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_SCALEN</name>
|
|
<description>Voltage scaler enable bit</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_INMESEL</name>
|
|
<description>comparator 2 input minus extended selection bits.</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_VALUE</name>
|
|
<description>Comparator 2 output status bit</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>COMP2_LOCK</name>
|
|
<description>CSR register lock bit</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>RNG</name>
|
|
<description>Random number generator</description>
|
|
<groupName>RNG</groupName>
|
|
<baseAddress>0x58001000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>True_RNG</name>
|
|
<description>True random number generator
|
|
interrupt</description>
|
|
<value>53</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RNGEN</name>
|
|
<description>Random number generator enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IE</name>
|
|
<description>Interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BYP</name>
|
|
<description>Bypass mode enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SEIS</name>
|
|
<description>Seed error interrupt status</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>CEIS</name>
|
|
<description>Clock error interrupt status</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SECS</name>
|
|
<description>Seed error current status</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>CECS</name>
|
|
<description>Clock error current status</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>DRDY</name>
|
|
<description>Data ready</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DR</name>
|
|
<displayName>DR</displayName>
|
|
<description>data register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RNDATA</name>
|
|
<description>Random data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>AES1</name>
|
|
<description>Advanced encryption standard hardware accelerator 1</description>
|
|
<groupName>AES1</groupName>
|
|
<baseAddress>0x50060000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>AES1</name>
|
|
<description>AES1 global interrupt</description>
|
|
<value>51</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NPBLB</name>
|
|
<description>Number of padding bytes in last block of payload</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>KEYSIZE</name>
|
|
<description>Key size selection</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHMOD2</name>
|
|
<description>AES chaining mode Bit2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GCMPH</name>
|
|
<description>Used only for GCM, CCM and GMAC algorithms and has no effect when other algorithms are selected</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAOUTEN</name>
|
|
<description>Enable DMA management of data output phase</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAINEN</name>
|
|
<description>Enable DMA management of data input phase</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Error interrupt enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCFIE</name>
|
|
<description>CCF flag interrupt enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRC</name>
|
|
<description>Error clear</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCFC</name>
|
|
<description>Computation Complete Flag Clear</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHMOD10</name>
|
|
<description>AES chaining mode Bit1 Bit0</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODE</name>
|
|
<description>AES operating mode</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DATATYPE</name>
|
|
<description>Data type selection (for data in and data out to/from the cryptographic block)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>AES enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BUSY</name>
|
|
<description>Busy flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WRERR</name>
|
|
<description>Write error flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RDERR</name>
|
|
<description>Read error flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCF</name>
|
|
<description>Computation complete flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DINR</name>
|
|
<displayName>DINR</displayName>
|
|
<description>data input register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_DINR</name>
|
|
<description>Data Input Register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DOUTR</name>
|
|
<displayName>DOUTR</displayName>
|
|
<description>data output register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_DOUTR</name>
|
|
<description>Data output register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR0</name>
|
|
<displayName>KEYR0</displayName>
|
|
<description>key register 0</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR0</name>
|
|
<description>Data Output Register (LSB key [31:0])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR1</name>
|
|
<displayName>KEYR1</displayName>
|
|
<description>key register 1</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR1</name>
|
|
<description>AES key register (key [63:32])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR2</name>
|
|
<displayName>KEYR2</displayName>
|
|
<description>key register 2</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR2</name>
|
|
<description>AES key register (key [95:64])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR3</name>
|
|
<displayName>KEYR3</displayName>
|
|
<description>key register 3</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR3</name>
|
|
<description>AES key register (MSB key [127:96])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR0</name>
|
|
<displayName>IVR0</displayName>
|
|
<description>initialization vector register 0</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR0</name>
|
|
<description>initialization vector register (LSB IVR [31:0])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR1</name>
|
|
<displayName>IVR1</displayName>
|
|
<description>initialization vector register 1</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR1</name>
|
|
<description>Initialization Vector Register (IVR [63:32])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR2</name>
|
|
<displayName>IVR2</displayName>
|
|
<description>initialization vector register 2</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR2</name>
|
|
<description>Initialization Vector Register (IVR [95:64])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR3</name>
|
|
<displayName>IVR3</displayName>
|
|
<description>initialization vector register 3</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR3</name>
|
|
<description>Initialization Vector Register (MSB IVR [127:96])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR4</name>
|
|
<displayName>KEYR4</displayName>
|
|
<description>key register 4</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR4</name>
|
|
<description>AES key register (MSB key [159:128])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR5</name>
|
|
<displayName>KEYR5</displayName>
|
|
<description>key register 5</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR5</name>
|
|
<description>AES key register (MSB key [191:160])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR6</name>
|
|
<displayName>KEYR6</displayName>
|
|
<description>key register 6</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR6</name>
|
|
<description>AES key register (MSB key [223:192])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR7</name>
|
|
<displayName>KEYR7</displayName>
|
|
<description>key register 7</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR7</name>
|
|
<description>AES key register (MSB key [255:224])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP0R</name>
|
|
<displayName>SUSP0R</displayName>
|
|
<description>AES suspend register 0</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP0R</name>
|
|
<description>AES suspend register 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP1R</name>
|
|
<displayName>SUSP1R</displayName>
|
|
<description>AES suspend register 1</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP1R</name>
|
|
<description>AES suspend register 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP2R</name>
|
|
<displayName>SUSP2R</displayName>
|
|
<description>AES suspend register 2</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP2R</name>
|
|
<description>AES suspend register 2</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP3R</name>
|
|
<displayName>SUSP3R</displayName>
|
|
<description>AES suspend register 3</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP3R</name>
|
|
<description>AES suspend register 3</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP4R</name>
|
|
<displayName>SUSP4R</displayName>
|
|
<description>AES suspend register 4</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP4R</name>
|
|
<description>AES suspend register 4</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP5R</name>
|
|
<displayName>SUSP5R</displayName>
|
|
<description>AES suspend register 5</description>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP5R</name>
|
|
<description>AES suspend register 5</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP6R</name>
|
|
<displayName>SUSP6R</displayName>
|
|
<description>AES suspend register 6</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP6R</name>
|
|
<description>AES suspend register 6</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP7R</name>
|
|
<displayName>SUSP7R</displayName>
|
|
<description>AES suspend register 7</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP7R</name>
|
|
<description>AES suspend register 7</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFR</name>
|
|
<displayName>HWCFR</displayName>
|
|
<description>AES hardware configuration register</description>
|
|
<addressOffset>0x3F0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000002</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CFG4</name>
|
|
<description>HW Generic 4</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFG3</name>
|
|
<description>HW Generic 3</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFG2</name>
|
|
<description>HW Generic 2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFG1</name>
|
|
<description>HW Generic 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VERR</name>
|
|
<displayName>VERR</displayName>
|
|
<description>AES version register</description>
|
|
<addressOffset>0x3F4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000010</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MAJREV</name>
|
|
<description>Major revision</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINREV</name>
|
|
<description>Minor revision</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPIDR</name>
|
|
<displayName>IPIDR</displayName>
|
|
<description>AES identification register</description>
|
|
<addressOffset>0x3F8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00170023</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ID</name>
|
|
<description>Identification code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SIDR</name>
|
|
<displayName>SIDR</displayName>
|
|
<description>AES size ID register</description>
|
|
<addressOffset>0x3FC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0xA3C5DD01</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ID</name>
|
|
<description>Size Identification code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>AES2</name>
|
|
<description>Advanced encryption standard hardware accelerator 1</description>
|
|
<groupName>AES1</groupName>
|
|
<baseAddress>0x58001800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>AES2</name>
|
|
<description>AES2 global interrupt</description>
|
|
<value>52</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NPBLB</name>
|
|
<description>Number of padding bytes in last block of payload</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>KEYSIZE</name>
|
|
<description>Key size selection</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHMOD2</name>
|
|
<description>AES chaining mode Bit2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GCMPH</name>
|
|
<description>Used only for GCM, CCM and GMAC algorithms and has no effect when other algorithms are selected</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAOUTEN</name>
|
|
<description>Enable DMA management of data output phase</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAINEN</name>
|
|
<description>Enable DMA management of data input phase</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Error interrupt enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCFIE</name>
|
|
<description>CCF flag interrupt enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRC</name>
|
|
<description>Error clear</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCFC</name>
|
|
<description>Computation Complete Flag Clear</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CHMOD10</name>
|
|
<description>AES chaining mode Bit1 Bit0</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODE</name>
|
|
<description>AES operating mode</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DATATYPE</name>
|
|
<description>Data type selection (for data in and data out to/from the cryptographic block)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>AES enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BUSY</name>
|
|
<description>Busy flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WRERR</name>
|
|
<description>Write error flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RDERR</name>
|
|
<description>Read error flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCF</name>
|
|
<description>Computation complete flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DINR</name>
|
|
<displayName>DINR</displayName>
|
|
<description>data input register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_DINR</name>
|
|
<description>Data Input Register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DOUTR</name>
|
|
<displayName>DOUTR</displayName>
|
|
<description>data output register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_DOUTR</name>
|
|
<description>Data output register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR0</name>
|
|
<displayName>KEYR0</displayName>
|
|
<description>key register 0</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR0</name>
|
|
<description>Data Output Register (LSB key [31:0])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR1</name>
|
|
<displayName>KEYR1</displayName>
|
|
<description>key register 1</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR1</name>
|
|
<description>AES key register (key [63:32])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR2</name>
|
|
<displayName>KEYR2</displayName>
|
|
<description>key register 2</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR2</name>
|
|
<description>AES key register (key [95:64])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR3</name>
|
|
<displayName>KEYR3</displayName>
|
|
<description>key register 3</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR3</name>
|
|
<description>AES key register (MSB key [127:96])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR0</name>
|
|
<displayName>IVR0</displayName>
|
|
<description>initialization vector register 0</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR0</name>
|
|
<description>initialization vector register (LSB IVR [31:0])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR1</name>
|
|
<displayName>IVR1</displayName>
|
|
<description>initialization vector register 1</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR1</name>
|
|
<description>Initialization Vector Register (IVR [63:32])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR2</name>
|
|
<displayName>IVR2</displayName>
|
|
<description>initialization vector register 2</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR2</name>
|
|
<description>Initialization Vector Register (IVR [95:64])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IVR3</name>
|
|
<displayName>IVR3</displayName>
|
|
<description>initialization vector register 3</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_IVR3</name>
|
|
<description>Initialization Vector Register (MSB IVR [127:96])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR4</name>
|
|
<displayName>KEYR4</displayName>
|
|
<description>key register 4</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR4</name>
|
|
<description>AES key register (MSB key [159:128])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR5</name>
|
|
<displayName>KEYR5</displayName>
|
|
<description>key register 5</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR5</name>
|
|
<description>AES key register (MSB key [191:160])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR6</name>
|
|
<displayName>KEYR6</displayName>
|
|
<description>key register 6</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR6</name>
|
|
<description>AES key register (MSB key [223:192])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR7</name>
|
|
<displayName>KEYR7</displayName>
|
|
<description>key register 7</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_KEYR7</name>
|
|
<description>AES key register (MSB key [255:224])</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP0R</name>
|
|
<displayName>SUSP0R</displayName>
|
|
<description>AES suspend register 0</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP0R</name>
|
|
<description>AES suspend register 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP1R</name>
|
|
<displayName>SUSP1R</displayName>
|
|
<description>AES suspend register 1</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP1R</name>
|
|
<description>AES suspend register 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP2R</name>
|
|
<displayName>SUSP2R</displayName>
|
|
<description>AES suspend register 2</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP2R</name>
|
|
<description>AES suspend register 2</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP3R</name>
|
|
<displayName>SUSP3R</displayName>
|
|
<description>AES suspend register 3</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP3R</name>
|
|
<description>AES suspend register 3</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP4R</name>
|
|
<displayName>SUSP4R</displayName>
|
|
<description>AES suspend register 4</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP4R</name>
|
|
<description>AES suspend register 4</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP5R</name>
|
|
<displayName>SUSP5R</displayName>
|
|
<description>AES suspend register 5</description>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP5R</name>
|
|
<description>AES suspend register 5</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP6R</name>
|
|
<displayName>SUSP6R</displayName>
|
|
<description>AES suspend register 6</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP6R</name>
|
|
<description>AES suspend register 6</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SUSP7R</name>
|
|
<displayName>SUSP7R</displayName>
|
|
<description>AES suspend register 7</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AES_SUSP7R</name>
|
|
<description>AES suspend register 7</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFR</name>
|
|
<displayName>HWCFR</displayName>
|
|
<description>AES hardware configuration register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000002</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CFG4</name>
|
|
<description>HW Generic 4</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFG3</name>
|
|
<description>HW Generic 3</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFG2</name>
|
|
<description>HW Generic 2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CFG1</name>
|
|
<description>HW Generic 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VERR</name>
|
|
<displayName>VERR</displayName>
|
|
<description>AES version register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000010</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MAJREV</name>
|
|
<description>Major revision</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINREV</name>
|
|
<description>Minor revision</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPIDR</name>
|
|
<displayName>IPIDR</displayName>
|
|
<description>AES identification register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00170023</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ID</name>
|
|
<description>Identification code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SIDR</name>
|
|
<displayName>SIDR</displayName>
|
|
<description>AES size ID register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00170023</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ID</name>
|
|
<description>Size Identification code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>HSEM</name>
|
|
<description>HSEM</description>
|
|
<groupName>Hardware_Semaphore</groupName>
|
|
<baseAddress>0x58001400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>HSEM</name>
|
|
<description>Semaphore interrupt 0 to CPU1</description>
|
|
<value>46</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>R0</name>
|
|
<displayName>R0</displayName>
|
|
<description>Semaphore 0 register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R1</name>
|
|
<displayName>R1</displayName>
|
|
<description>Semaphore 1 register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R2</name>
|
|
<displayName>R2</displayName>
|
|
<description>Semaphore 2 register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R3</name>
|
|
<displayName>R3</displayName>
|
|
<description>Semaphore 3 register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R4</name>
|
|
<displayName>R4</displayName>
|
|
<description>Semaphore 4 register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R5</name>
|
|
<displayName>R5</displayName>
|
|
<description>Semaphore 5 register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R6</name>
|
|
<displayName>R6</displayName>
|
|
<description>Semaphore 6 register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R7</name>
|
|
<displayName>R7</displayName>
|
|
<description>Semaphore 7 register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R8</name>
|
|
<displayName>R8</displayName>
|
|
<description>Semaphore 8 register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R9</name>
|
|
<displayName>R9</displayName>
|
|
<description>Semaphore 9 register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R10</name>
|
|
<displayName>R10</displayName>
|
|
<description>Semaphore 10 register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R11</name>
|
|
<displayName>R11</displayName>
|
|
<description>Semaphore 11 register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R12</name>
|
|
<displayName>R12</displayName>
|
|
<description>Semaphore 12 register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R13</name>
|
|
<displayName>R13</displayName>
|
|
<description>Semaphore 13 register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R14</name>
|
|
<displayName>R14</displayName>
|
|
<description>Semaphore 14 register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R15</name>
|
|
<displayName>R15</displayName>
|
|
<description>Semaphore 15 register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R16</name>
|
|
<displayName>R16</displayName>
|
|
<description>Semaphore 16 register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R17</name>
|
|
<displayName>R17</displayName>
|
|
<description>Semaphore 17 register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R18</name>
|
|
<displayName>R18</displayName>
|
|
<description>Semaphore 18 register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R19</name>
|
|
<displayName>R19</displayName>
|
|
<description>Semaphore 19 register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R20</name>
|
|
<displayName>R20</displayName>
|
|
<description>Semaphore 20 register</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R21</name>
|
|
<displayName>R21</displayName>
|
|
<description>Semaphore 21 register</description>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R22</name>
|
|
<displayName>R22</displayName>
|
|
<description>Semaphore 22 register</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R23</name>
|
|
<displayName>R23</displayName>
|
|
<description>Semaphore 23 register</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R24</name>
|
|
<displayName>R24</displayName>
|
|
<description>Semaphore 24 register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R25</name>
|
|
<displayName>R25</displayName>
|
|
<description>Semaphore 25 register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R26</name>
|
|
<displayName>R26</displayName>
|
|
<description>Semaphore 26 register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R27</name>
|
|
<displayName>R27</displayName>
|
|
<description>Semaphore 27 register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R28</name>
|
|
<displayName>R28</displayName>
|
|
<description>Semaphore 28 register</description>
|
|
<addressOffset>0x70</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R29</name>
|
|
<displayName>R29</displayName>
|
|
<description>Semaphore 29 register</description>
|
|
<addressOffset>0x74</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R30</name>
|
|
<displayName>R30</displayName>
|
|
<description>Semaphore 30 register</description>
|
|
<addressOffset>0x78</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>R31</name>
|
|
<displayName>R31</displayName>
|
|
<description>Semaphore 31 register</description>
|
|
<addressOffset>0x7C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR0</name>
|
|
<displayName>RLR0</displayName>
|
|
<description>Semaphore 0 read lock register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR1</name>
|
|
<displayName>RLR1</displayName>
|
|
<description>Semaphore 1 read lock register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR2</name>
|
|
<displayName>RLR2</displayName>
|
|
<description>Semaphore 2 read lock register</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR3</name>
|
|
<displayName>RLR3</displayName>
|
|
<description>Semaphore 3 read lock register</description>
|
|
<addressOffset>0x8C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR4</name>
|
|
<displayName>RLR4</displayName>
|
|
<description>Semaphore 4 read lock read lock register</description>
|
|
<addressOffset>0x90</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR5</name>
|
|
<displayName>RLR5</displayName>
|
|
<description>Semaphore 5 read lock register</description>
|
|
<addressOffset>0x94</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR6</name>
|
|
<displayName>RLR6</displayName>
|
|
<description>Semaphore 6 read lock register</description>
|
|
<addressOffset>0x98</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR7</name>
|
|
<displayName>RLR7</displayName>
|
|
<description>Semaphore 7 read lock register</description>
|
|
<addressOffset>0x9C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR8</name>
|
|
<displayName>RLR8</displayName>
|
|
<description>Semaphore 8 read lock register</description>
|
|
<addressOffset>0xA0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR9</name>
|
|
<displayName>RLR9</displayName>
|
|
<description>Semaphore 9 read lock register</description>
|
|
<addressOffset>0xA4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR10</name>
|
|
<displayName>RLR10</displayName>
|
|
<description>Semaphore 10 read lock register</description>
|
|
<addressOffset>0xA8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR11</name>
|
|
<displayName>RLR11</displayName>
|
|
<description>Semaphore 11 read lock register</description>
|
|
<addressOffset>0xAC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR12</name>
|
|
<displayName>RLR12</displayName>
|
|
<description>Semaphore 12 read lock register</description>
|
|
<addressOffset>0xB0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR13</name>
|
|
<displayName>RLR13</displayName>
|
|
<description>Semaphore 13 read lock register</description>
|
|
<addressOffset>0xB4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR14</name>
|
|
<displayName>RLR14</displayName>
|
|
<description>Semaphore 14 read lock register</description>
|
|
<addressOffset>0xB8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR15</name>
|
|
<displayName>RLR15</displayName>
|
|
<description>Semaphore 15 read lock register</description>
|
|
<addressOffset>0xBC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR16</name>
|
|
<displayName>RLR16</displayName>
|
|
<description>Semaphore 16 read lock register</description>
|
|
<addressOffset>0xC0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR17</name>
|
|
<displayName>RLR17</displayName>
|
|
<description>Semaphore 17 read lock register</description>
|
|
<addressOffset>0xC4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR18</name>
|
|
<displayName>RLR18</displayName>
|
|
<description>Semaphore 18 read lock register</description>
|
|
<addressOffset>0xC8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR19</name>
|
|
<displayName>RLR19</displayName>
|
|
<description>Semaphore 19 read lock register</description>
|
|
<addressOffset>0xCC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR20</name>
|
|
<displayName>RLR20</displayName>
|
|
<description>Semaphore 20 read lock register</description>
|
|
<addressOffset>0xD0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR21</name>
|
|
<displayName>RLR21</displayName>
|
|
<description>Semaphore 21 read lock register</description>
|
|
<addressOffset>0xD4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR22</name>
|
|
<displayName>RLR22</displayName>
|
|
<description>Semaphore 22 read lock register</description>
|
|
<addressOffset>0xD8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR23</name>
|
|
<displayName>RLR23</displayName>
|
|
<description>Semaphore 23 read lock register</description>
|
|
<addressOffset>0xDC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR24</name>
|
|
<displayName>RLR24</displayName>
|
|
<description>Semaphore 24 read lock register</description>
|
|
<addressOffset>0xE0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR25</name>
|
|
<displayName>RLR25</displayName>
|
|
<description>Semaphore 25 read lock register</description>
|
|
<addressOffset>0xE4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR26</name>
|
|
<displayName>RLR26</displayName>
|
|
<description>Semaphore 26 read lock register</description>
|
|
<addressOffset>0xE8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR27</name>
|
|
<displayName>RLR27</displayName>
|
|
<description>Semaphore 27 read lock register</description>
|
|
<addressOffset>0xEC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR28</name>
|
|
<displayName>RLR28</displayName>
|
|
<description>Semaphore 28 read lock register</description>
|
|
<addressOffset>0xF0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR29</name>
|
|
<displayName>RLR29</displayName>
|
|
<description>Semaphore 29 read lock register</description>
|
|
<addressOffset>0xF4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR30</name>
|
|
<displayName>RLR30</displayName>
|
|
<description>Semaphore 30 read lock register</description>
|
|
<addressOffset>0xF8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RLR31</name>
|
|
<displayName>RLR31</displayName>
|
|
<description>Semaphore 31 read lock register</description>
|
|
<addressOffset>0xFC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>lock indication</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>Semaphore CoreID</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCID</name>
|
|
<description>Semaphore ProcessID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Semaphore Clear register</description>
|
|
<addressOffset>0x140</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>KEY</name>
|
|
<description>Semaphore clear Key</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COREID</name>
|
|
<description>CoreID of semaphore to be cleared</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>KEYR</name>
|
|
<displayName>KEYR</displayName>
|
|
<description>Interrupt clear register</description>
|
|
<addressOffset>0x144</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>KEY</name>
|
|
<description>Semaphore Clear Key</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR2</name>
|
|
<displayName>HWCFGR2</displayName>
|
|
<description>Semaphore hardware configuration register 2</description>
|
|
<addressOffset>0x3EC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000084</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MASTERID4</name>
|
|
<description>Hardware Configuration valid bus masters ID4</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MASTERID3</name>
|
|
<description>Hardware Configuration valid bus masters ID3</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MASTERID2</name>
|
|
<description>Hardware Configuration valid bus masters ID2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MASTERID1</name>
|
|
<description>Hardware Configuration valid bus masters ID1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR1</name>
|
|
<displayName>HWCFGR1</displayName>
|
|
<description>Semaphore hardware configuration register 1</description>
|
|
<addressOffset>0x3F0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000220</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NBINT</name>
|
|
<description>Hardware Configuration number of interrupts supported number of master IDs</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBSEM</name>
|
|
<description>Hardware Configuration number of semaphores</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VERR</name>
|
|
<displayName>VERR</displayName>
|
|
<description>HSEM version register</description>
|
|
<addressOffset>0x3F4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000020</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MAJREV</name>
|
|
<description>Major Revision</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINREV</name>
|
|
<description>Minor Revision</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPIDR</name>
|
|
<displayName>IPIDR</displayName>
|
|
<description>HSEM indentification register</description>
|
|
<addressOffset>0x3F8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00100072</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ID</name>
|
|
<description>Identification Code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SIDR</name>
|
|
<displayName>SIDR</displayName>
|
|
<description>HSEM size indentification register</description>
|
|
<addressOffset>0x3FC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0xA3C5DD01</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SID</name>
|
|
<description>Size Identification Code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1IER0</name>
|
|
<displayName>C1IER0</displayName>
|
|
<description>HSEM Interrupt enable register</description>
|
|
<addressOffset>0x100</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ISEm</name>
|
|
<description>CPU(n) semaphore m enable bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1ICR</name>
|
|
<displayName>C1ICR</displayName>
|
|
<description>HSEM Interrupt clear register</description>
|
|
<addressOffset>0x104</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ISCm</name>
|
|
<description>CPU(n) semaphore m clear bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1ISR</name>
|
|
<displayName>C1ISR</displayName>
|
|
<description>HSEM Interrupt status register</description>
|
|
<addressOffset>0x108</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ISFm</name>
|
|
<description>CPU(n) semaphore m status bit before enable (mask)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1MISR</name>
|
|
<displayName>C1MISR</displayName>
|
|
<description>HSEM Masked interrupt status register</description>
|
|
<addressOffset>0x10C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MISFm</name>
|
|
<description>masked CPU(n) semaphore m status bit after enable (mask).</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2IER0</name>
|
|
<displayName>C2IER0</displayName>
|
|
<description>HSEM Interrupt enable register</description>
|
|
<addressOffset>0x110</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ISEm</name>
|
|
<description>CPU(2) semaphore m enable bit.</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2ICR</name>
|
|
<displayName>C2ICR</displayName>
|
|
<description>HSEM Interrupt clear register</description>
|
|
<addressOffset>0x114</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ISCm</name>
|
|
<description>CPU(2) semaphore m clear bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2ISR</name>
|
|
<displayName>C2ISR</displayName>
|
|
<description>HSEM Interrupt status register</description>
|
|
<addressOffset>0x118</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ISFm</name>
|
|
<description>CPU(2) semaphore m status bit before enable (mask).</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2MISR</name>
|
|
<displayName>C2MISR</displayName>
|
|
<description>HSEM Masked interrupt status register</description>
|
|
<addressOffset>0x11C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MISFm</name>
|
|
<description>masked CPU(2) semaphore m status bit after enable (mask).</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>ADC</name>
|
|
<description>Analog to Digital Converter instance 1</description>
|
|
<groupName>ADC</groupName>
|
|
<baseAddress>0x50040000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>ADC1</name>
|
|
<description>ADC1 global interrupt</description>
|
|
<value>18</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>ADC interrupt and status register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JQOVF</name>
|
|
<description>ADC group injected contexts queue overflow flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD3</name>
|
|
<description>ADC analog watchdog 3 flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD2</name>
|
|
<description>ADC analog watchdog 2 flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD1</name>
|
|
<description>ADC analog watchdog 1 flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JEOS</name>
|
|
<description>ADC group injected end of sequence conversions flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JEOC</name>
|
|
<description>ADC group injected end of unitary conversion flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVR</name>
|
|
<description>ADC group regular overrun flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOS</name>
|
|
<description>ADC group regular end of sequence conversions flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOC</name>
|
|
<description>ADC group regular end of unitary conversion flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOSMP</name>
|
|
<description>ADC group regular end of sampling flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADRDY</name>
|
|
<description>ADC ready flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IER</name>
|
|
<displayName>IER</displayName>
|
|
<description>ADC interrupt enable register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JQOVFIE</name>
|
|
<description>ADC group injected contexts queue overflow interrupt</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD3IE</name>
|
|
<description>ADC analog watchdog 3 interrupt</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD2IE</name>
|
|
<description>ADC analog watchdog 2 interrupt</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD1IE</name>
|
|
<description>ADC analog watchdog 1 interrupt</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JEOSIE</name>
|
|
<description>ADC group injected end of sequence conversions interrupt</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JEOCIE</name>
|
|
<description>ADC group injected end of unitary conversion interrupt</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRIE</name>
|
|
<description>ADC group regular overrun interrupt</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOSIE</name>
|
|
<description>ADC group regular end of sequence conversions interrupt</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOCIE</name>
|
|
<description>ADC group regular end of unitary conversion interrupt</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOSMPIE</name>
|
|
<description>ADC group regular end of sampling interrupt</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADRDYIE</name>
|
|
<description>ADC ready interrupt</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>ADC control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADCAL</name>
|
|
<description>ADC calibration</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADCALDIF</name>
|
|
<description>ADC differential mode for calibration</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEEPPWD</name>
|
|
<description>ADC deep power down enable</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADVREGEN</name>
|
|
<description>ADC voltage regulator enable</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JADSTP</name>
|
|
<description>ADC group injected conversion stop</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADSTP</name>
|
|
<description>ADC group regular conversion stop</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JADSTART</name>
|
|
<description>ADC group injected conversion start</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADSTART</name>
|
|
<description>ADC group regular conversion start</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADDIS</name>
|
|
<description>ADC disable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADEN</name>
|
|
<description>ADC enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFGR</name>
|
|
<displayName>CFGR</displayName>
|
|
<description>ADC configuration register 1</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x80000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JQDIS</name>
|
|
<description>ADC group injected contexts queue disable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWDCH1CH</name>
|
|
<description>ADC analog watchdog 1 monitored channel selection</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JAUTO</name>
|
|
<description>ADC group injected automatic trigger mode</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JAWD1EN</name>
|
|
<description>ADC analog watchdog 1 enable on scope ADC group injected</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD1EN</name>
|
|
<description>ADC analog watchdog 1 enable on scope ADC group regular</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AWD1SGL</name>
|
|
<description>ADC analog watchdog 1 monitoring a single channel or all channels</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JQM</name>
|
|
<description>ADC group injected contexts queue mode</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JDISCEN</name>
|
|
<description>ADC group injected sequencer discontinuous mode</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DISCNUM</name>
|
|
<description>ADC group regular sequencer discontinuous number of ranks</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DISCEN</name>
|
|
<description>ADC group regular sequencer discontinuous mode</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AUTDLY</name>
|
|
<description>ADC low power auto wait</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CONT</name>
|
|
<description>ADC group regular continuous conversion mode</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRMOD</name>
|
|
<description>ADC group regular overrun configuration</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTEN</name>
|
|
<description>ADC group regular external trigger polarity</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTSEL</name>
|
|
<description>ADC group regular external trigger source</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ALIGN</name>
|
|
<description>ADC data alignement</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RES</name>
|
|
<description>ADC data resolution</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMACFG</name>
|
|
<description>ADC DMA transfer configuration</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAEN</name>
|
|
<description>ADC DMA transfer enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFGR2</name>
|
|
<displayName>CFGR2</displayName>
|
|
<description>ADC configuration register 2</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ROVSM</name>
|
|
<description>ADC oversampling mode managing interlaced conversions of ADC group regular and group injected</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TOVS</name>
|
|
<description>ADC oversampling discontinuous mode (triggered mode) for ADC group regular</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVSS</name>
|
|
<description>ADC oversampling shift</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVSR</name>
|
|
<description>ADC oversampling ratio</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JOVSE</name>
|
|
<description>ADC oversampler enable on scope ADC group injected</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ROVSE</name>
|
|
<description>ADC oversampler enable on scope ADC group regular</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SMPR1</name>
|
|
<displayName>SMPR1</displayName>
|
|
<description>ADC sampling time register 1</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SMP9</name>
|
|
<description>ADC channel 9 sampling time selection</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP8</name>
|
|
<description>ADC channel 8 sampling time selection</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP7</name>
|
|
<description>ADC channel 7 sampling time selection</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP6</name>
|
|
<description>ADC channel 6 sampling time selection</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP5</name>
|
|
<description>ADC channel 5 sampling time selection</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP4</name>
|
|
<description>ADC channel 4 sampling time selection</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP3</name>
|
|
<description>ADC channel 3 sampling time selection</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP2</name>
|
|
<description>ADC channel 2 sampling time selection</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP1</name>
|
|
<description>ADC channel 1 sampling time selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SMPR2</name>
|
|
<displayName>SMPR2</displayName>
|
|
<description>ADC sampling time register 2</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SMP18</name>
|
|
<description>ADC channel 18 sampling time selection</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP17</name>
|
|
<description>ADC channel 17 sampling time selection</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP16</name>
|
|
<description>ADC channel 16 sampling time selection</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP15</name>
|
|
<description>ADC channel 15 sampling time selection</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP14</name>
|
|
<description>ADC channel 14 sampling time selection</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP13</name>
|
|
<description>ADC channel 13 sampling time selection</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP12</name>
|
|
<description>ADC channel 12 sampling time selection</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP11</name>
|
|
<description>ADC channel 11 sampling time selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMP10</name>
|
|
<description>ADC channel 10 sampling time selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TR1</name>
|
|
<displayName>TR1</displayName>
|
|
<description>ADC analog watchdog 1 threshold register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0FFF0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>HT1</name>
|
|
<description>ADC analog watchdog 1 threshold high</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LT1</name>
|
|
<description>ADC analog watchdog 1 threshold low</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TR2</name>
|
|
<displayName>TR2</displayName>
|
|
<description>ADC analog watchdog 2 threshold register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0FFF0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>HT2</name>
|
|
<description>ADC analog watchdog 2 threshold high</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LT2</name>
|
|
<description>ADC analog watchdog 2 threshold low</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TR3</name>
|
|
<displayName>TR3</displayName>
|
|
<description>ADC analog watchdog 3 threshold register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0FFF0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>HT3</name>
|
|
<description>ADC analog watchdog 3 threshold high</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LT3</name>
|
|
<description>ADC analog watchdog 3 threshold low</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SQR1</name>
|
|
<displayName>SQR1</displayName>
|
|
<description>ADC group regular sequencer ranks register 1</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SQ4</name>
|
|
<description>ADC group regular sequencer rank 4</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ3</name>
|
|
<description>ADC group regular sequencer rank 3</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ2</name>
|
|
<description>ADC group regular sequencer rank 2</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ1</name>
|
|
<description>ADC group regular sequencer rank 1</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>L3</name>
|
|
<description>L3</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SQR2</name>
|
|
<displayName>SQR2</displayName>
|
|
<description>ADC group regular sequencer ranks register 2</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SQ9</name>
|
|
<description>ADC group regular sequencer rank 9</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ8</name>
|
|
<description>ADC group regular sequencer rank 8</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ7</name>
|
|
<description>ADC group regular sequencer rank 7</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ6</name>
|
|
<description>ADC group regular sequencer rank 6</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ5</name>
|
|
<description>ADC group regular sequencer rank 5</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SQR3</name>
|
|
<displayName>SQR3</displayName>
|
|
<description>ADC group regular sequencer ranks register 3</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SQ14</name>
|
|
<description>ADC group regular sequencer rank 14</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ13</name>
|
|
<description>ADC group regular sequencer rank 13</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ12</name>
|
|
<description>ADC group regular sequencer rank 12</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ11</name>
|
|
<description>ADC group regular sequencer rank 11</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ10</name>
|
|
<description>ADC group regular sequencer rank 10</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SQR4</name>
|
|
<displayName>SQR4</displayName>
|
|
<description>ADC group regular sequencer ranks register 4</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SQ16</name>
|
|
<description>ADC group regular sequencer rank 16</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SQ15</name>
|
|
<description>ADC group regular sequencer rank 15</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DR</name>
|
|
<displayName>DR</displayName>
|
|
<description>ADC group regular conversion data register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RDATA_0_6</name>
|
|
<description>Regular Data converted 0_6</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RDATA_7_15</name>
|
|
<description>15</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>JSQR</name>
|
|
<displayName>JSQR</displayName>
|
|
<description>ADC group injected sequencer register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JSQ4</name>
|
|
<description>ADC group injected sequencer rank 4</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JSQ3</name>
|
|
<description>ADC group injected sequencer rank 3</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JSQ2</name>
|
|
<description>ADC group injected sequencer rank 2</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JSQ1</name>
|
|
<description>ADC group injected sequencer rank 1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JEXTEN</name>
|
|
<description>ADC group injected external trigger polarity</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JEXTSEL</name>
|
|
<description>ADC group injected external trigger source</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>JL</name>
|
|
<description>ADC group injected sequencer scan length</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OFR1</name>
|
|
<displayName>OFR1</displayName>
|
|
<description>ADC offset number 1 register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OFFSET1_EN</name>
|
|
<description>ADC offset number 1 enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET1_CH</name>
|
|
<description>ADC offset number 1 channel selection</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET1</name>
|
|
<description>ADC offset number 1 offset level</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OFR2</name>
|
|
<displayName>OFR2</displayName>
|
|
<description>ADC offset number 2 register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OFFSET2_EN</name>
|
|
<description>ADC offset number 2 enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET2_CH</name>
|
|
<description>ADC offset number 2 channel selection</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET2</name>
|
|
<description>ADC offset number 2 offset level</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OFR3</name>
|
|
<displayName>OFR3</displayName>
|
|
<description>ADC offset number 3 register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OFFSET3_EN</name>
|
|
<description>ADC offset number 3 enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET3_CH</name>
|
|
<description>ADC offset number 3 channel selection</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET3</name>
|
|
<description>ADC offset number 3 offset level</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OFR4</name>
|
|
<displayName>OFR4</displayName>
|
|
<description>ADC offset number 4 register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OFFSET4_EN</name>
|
|
<description>ADC offset number 4 enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET4_CH</name>
|
|
<description>ADC offset number 4 channel selection</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFFSET4</name>
|
|
<description>ADC offset number 4 offset level</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>JDR1</name>
|
|
<displayName>JDR1</displayName>
|
|
<description>ADC group injected sequencer rank 1 register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JDATA1</name>
|
|
<description>ADC group injected sequencer rank 1 conversion data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>JDR2</name>
|
|
<displayName>JDR2</displayName>
|
|
<description>ADC group injected sequencer rank 2 register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JDATA2</name>
|
|
<description>ADC group injected sequencer rank 2 conversion data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>JDR3</name>
|
|
<displayName>JDR3</displayName>
|
|
<description>ADC group injected sequencer rank 3 register</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JDATA3</name>
|
|
<description>ADC group injected sequencer rank 3 conversion data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>JDR4</name>
|
|
<displayName>JDR4</displayName>
|
|
<description>ADC group injected sequencer rank 4 register</description>
|
|
<addressOffset>0x8C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>JDATA4</name>
|
|
<description>ADC group injected sequencer rank 4 conversion data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AWD2CR</name>
|
|
<displayName>AWD2CR</displayName>
|
|
<description>ADC analog watchdog 2 configuration register</description>
|
|
<addressOffset>0xA0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AWD2CH</name>
|
|
<description>ADC analog watchdog 2 monitored channel selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>19</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AWD3CR</name>
|
|
<displayName>AWD3CR</displayName>
|
|
<description>ADC analog watchdog 3 configuration register</description>
|
|
<addressOffset>0xA4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AWD3CH</name>
|
|
<description>ADC analog watchdog 3 monitored channel selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>19</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DIFSEL</name>
|
|
<displayName>DIFSEL</displayName>
|
|
<description>ADC channel differential or single-ended mode selection register</description>
|
|
<addressOffset>0xB0</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DIFSEL_0</name>
|
|
<description>ADC channel differential or single-ended mode for channel 0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>DIFSEL_1_15</name>
|
|
<description>ADC channel differential or single-ended mode for channels 1 to 15</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>DIFSEL_16_18</name>
|
|
<description>ADC channel differential or single-ended mode for channels 18 to 16</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CALFACT</name>
|
|
<displayName>CALFACT</displayName>
|
|
<description>ADC calibration factors register</description>
|
|
<addressOffset>0xB4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CALFACT_D</name>
|
|
<description>ADC calibration factor in differential mode</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CALFACT_S</name>
|
|
<description>ADC calibration factor in single-ended mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR</name>
|
|
<displayName>CCR</displayName>
|
|
<description>ADC common control register</description>
|
|
<addressOffset>0x308</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>VBATEN</name>
|
|
<description>VBAT enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TSEN</name>
|
|
<description>Temperature sensor enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VREFEN</name>
|
|
<description>VREFEN</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRESC</name>
|
|
<description>ADC prescaler</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKMODE</name>
|
|
<description>ADC clock mode</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>GPIOA</name>
|
|
<description>General-purpose I/Os</description>
|
|
<groupName>GPIO</groupName>
|
|
<baseAddress>0x48000000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>MODER</name>
|
|
<displayName>MODER</displayName>
|
|
<description>GPIO port mode register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xABFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MODER15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OTYPER</name>
|
|
<displayName>OTYPER</displayName>
|
|
<description>GPIO port output type register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OT15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OSPEEDR</name>
|
|
<displayName>OSPEEDR</displayName>
|
|
<description>GPIO port output speed register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0C000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OSPEEDR15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUPDR</name>
|
|
<displayName>PUPDR</displayName>
|
|
<description>GPIO port pull-up/pull-down register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x64000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PUPDR15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IDR</name>
|
|
<displayName>IDR</displayName>
|
|
<description>GPIO port input data register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IDR15</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR14</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR13</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR12</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR11</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR10</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR9</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR8</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR7</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR6</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR5</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR4</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR3</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR2</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR1</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR0</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ODR</name>
|
|
<displayName>ODR</displayName>
|
|
<description>GPIO port output data register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ODR15</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR14</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR13</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR12</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR11</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR10</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR9</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR8</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR7</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR6</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR5</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR4</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR3</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR2</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR1</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR0</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSRR</name>
|
|
<displayName>BSRR</displayName>
|
|
<description>GPIO port bit set/reset register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR15</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR14</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR13</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR12</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR11</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR10</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR9</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR8</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR7</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR6</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR5</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS15</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS14</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS13</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS12</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS11</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS10</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS9</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS8</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS7</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS6</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS5</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS4</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS3</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS2</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS1</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LCKR</name>
|
|
<displayName>LCKR</displayName>
|
|
<description>GPIO port configuration lock register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LCKK</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK15</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK14</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK13</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK12</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK11</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK10</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK9</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK8</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK7</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK6</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK5</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK4</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK3</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK2</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK1</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK0</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRL</name>
|
|
<displayName>AFRL</displayName>
|
|
<description>GPIO alternate function low register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL7</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL6</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL5</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL4</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL3</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL2</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL1</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL0</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRH</name>
|
|
<displayName>AFRH</displayName>
|
|
<description>GPIO alternate function high register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL15</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL14</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL13</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL12</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL11</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL10</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL9</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL8</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BRR</name>
|
|
<displayName>BRR</displayName>
|
|
<description>port bit reset register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR5</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR6</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR7</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR8</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR9</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR10</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR11</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR12</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR13</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR14</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR15</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>GPIOB</name>
|
|
<description>General-purpose I/Os</description>
|
|
<groupName>GPIO</groupName>
|
|
<baseAddress>0x48000400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>MODER</name>
|
|
<displayName>MODER</displayName>
|
|
<description>GPIO port mode register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFEBF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MODER15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OTYPER</name>
|
|
<displayName>OTYPER</displayName>
|
|
<description>GPIO port output type register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OT15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OSPEEDR</name>
|
|
<displayName>OSPEEDR</displayName>
|
|
<description>GPIO port output speed register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000000C0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OSPEEDR15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUPDR</name>
|
|
<displayName>PUPDR</displayName>
|
|
<description>GPIO port pull-up/pull-down register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000100</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PUPDR15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IDR</name>
|
|
<displayName>IDR</displayName>
|
|
<description>GPIO port input data register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IDR15</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR14</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR13</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR12</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR11</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR10</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR9</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR8</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR7</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR6</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR5</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR4</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR3</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR2</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR1</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR0</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ODR</name>
|
|
<displayName>ODR</displayName>
|
|
<description>GPIO port output data register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ODR15</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR14</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR13</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR12</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR11</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR10</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR9</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR8</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR7</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR6</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR5</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR4</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR3</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR2</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR1</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR0</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSRR</name>
|
|
<displayName>BSRR</displayName>
|
|
<description>GPIO port bit set/reset register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR15</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR14</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR13</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR12</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR11</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR10</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR9</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR8</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR7</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR6</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR5</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS15</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS14</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS13</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS12</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS11</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS10</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS9</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS8</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS7</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS6</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS5</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS4</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS3</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS2</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS1</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LCKR</name>
|
|
<displayName>LCKR</displayName>
|
|
<description>GPIO port configuration lock register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LCKK</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK15</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK14</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK13</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK12</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK11</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK10</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK9</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK8</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK7</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK6</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK5</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK4</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK3</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK2</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK1</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK0</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRL</name>
|
|
<displayName>AFRL</displayName>
|
|
<description>GPIO alternate function low register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL7</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL6</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL5</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL4</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL3</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL2</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL1</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL0</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRH</name>
|
|
<displayName>AFRH</displayName>
|
|
<description>GPIO alternate function high register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL15</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL14</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL13</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL12</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL11</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL10</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL9</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL8</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BRR</name>
|
|
<displayName>BRR</displayName>
|
|
<description>port bit reset register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR5</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR6</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR7</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR8</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR9</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR10</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR11</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR12</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR13</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR14</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR15</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>GPIOC</name>
|
|
<description>General-purpose I/Os</description>
|
|
<groupName>GPIO</groupName>
|
|
<baseAddress>0x48000800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>MODER</name>
|
|
<displayName>MODER</displayName>
|
|
<description>GPIO port mode register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MODER15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OTYPER</name>
|
|
<displayName>OTYPER</displayName>
|
|
<description>GPIO port output type register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OT15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OSPEEDR</name>
|
|
<displayName>OSPEEDR</displayName>
|
|
<description>GPIO port output speed register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000000C0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OSPEEDR15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUPDR</name>
|
|
<displayName>PUPDR</displayName>
|
|
<description>GPIO port pull-up/pull-down register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000100</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PUPDR15</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR14</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR13</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR12</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR11</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR10</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR9</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR8</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR7</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR6</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR5</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IDR</name>
|
|
<displayName>IDR</displayName>
|
|
<description>GPIO port input data register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IDR15</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR14</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR13</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR12</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR11</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR10</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR9</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR8</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR7</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR6</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR5</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR4</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR3</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR2</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR1</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR0</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ODR</name>
|
|
<displayName>ODR</displayName>
|
|
<description>GPIO port output data register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ODR15</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR14</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR13</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR12</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR11</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR10</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR9</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR8</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR7</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR6</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR5</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR4</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR3</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR2</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR1</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR0</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSRR</name>
|
|
<displayName>BSRR</displayName>
|
|
<description>GPIO port bit set/reset register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR15</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR14</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR13</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR12</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR11</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR10</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR9</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR8</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR7</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR6</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR5</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS15</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS14</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS13</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS12</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS11</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS10</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS9</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS8</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS7</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS6</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS5</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS4</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS3</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS2</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS1</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LCKR</name>
|
|
<displayName>LCKR</displayName>
|
|
<description>GPIO port configuration lock register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LCKK</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK15</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK14</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK13</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK12</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK11</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK10</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK9</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK8</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK7</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK6</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK5</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK4</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK3</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK2</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK1</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK0</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRL</name>
|
|
<displayName>AFRL</displayName>
|
|
<description>GPIO alternate function low register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL7</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL6</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL5</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL4</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL3</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL2</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL1</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL0</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRH</name>
|
|
<displayName>AFRH</displayName>
|
|
<description>GPIO alternate function high register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL15</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL14</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL13</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL12</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL11</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL10</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL9</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL8</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BRR</name>
|
|
<displayName>BRR</displayName>
|
|
<description>port bit reset register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR5</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR6</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR7</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR8</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR9</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR10</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR11</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR12</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR13</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR14</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR15</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral derivedFrom="GPIOC">
|
|
<name>GPIOD</name>
|
|
<baseAddress>0x48000C00</baseAddress>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>GPIOE</name>
|
|
<description>General-purpose I/Os</description>
|
|
<groupName>GPIO</groupName>
|
|
<baseAddress>0x48001000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>MODER</name>
|
|
<displayName>MODER</displayName>
|
|
<description>GPIO port mode register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000003FF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MODER4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OTYPER</name>
|
|
<displayName>OTYPER</displayName>
|
|
<description>GPIO port output type register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OT4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OSPEEDR</name>
|
|
<displayName>OSPEEDR</displayName>
|
|
<description>GPIO port output speed register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000000C0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OSPEEDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUPDR</name>
|
|
<displayName>PUPDR</displayName>
|
|
<description>GPIO port pull-up/pull-down register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PUPDR4</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR2</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IDR</name>
|
|
<displayName>IDR</displayName>
|
|
<description>GPIO port input data register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IDR4</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR3</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR2</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR1</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR0</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ODR</name>
|
|
<displayName>ODR</displayName>
|
|
<description>GPIO port output data register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ODR4</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR3</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR2</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR1</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR0</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSRR</name>
|
|
<displayName>BSRR</displayName>
|
|
<description>GPIO port bit set/reset register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS4</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS3</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS2</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS1</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LCKR</name>
|
|
<displayName>LCKR</displayName>
|
|
<description>GPIO port configuration lock register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LCKK</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK4</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK3</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK2</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK1</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK0</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRL</name>
|
|
<displayName>AFRL</displayName>
|
|
<description>GPIO alternate function low register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL4</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL3</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL2</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL1</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL0</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRH</name>
|
|
<displayName>AFRH</displayName>
|
|
<description>GPIO alternate function high register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL15</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL14</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL13</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL12</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL11</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL10</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL9</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL8</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BRR</name>
|
|
<displayName>BRR</displayName>
|
|
<description>port bit reset register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR2</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR4</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>GPIOH</name>
|
|
<description>General-purpose I/Os</description>
|
|
<groupName>GPIO</groupName>
|
|
<baseAddress>0x48001C00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>MODER</name>
|
|
<displayName>MODER</displayName>
|
|
<description>GPIO port mode register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x000000CF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MODER3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODER0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OTYPER</name>
|
|
<displayName>OTYPER</displayName>
|
|
<description>GPIO port output type register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OT3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OT0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OSPEEDR</name>
|
|
<displayName>OSPEEDR</displayName>
|
|
<description>GPIO port output speed register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OSPEEDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSPEEDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PUPDR</name>
|
|
<displayName>PUPDR</displayName>
|
|
<description>GPIO port pull-up/pull-down register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PUPDR3</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR1</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PUPDR0</name>
|
|
<description>Port x configuration bits (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IDR</name>
|
|
<displayName>IDR</displayName>
|
|
<description>GPIO port input data register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IDR3</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR1</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDR0</name>
|
|
<description>Port input data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ODR</name>
|
|
<displayName>ODR</displayName>
|
|
<description>GPIO port output data register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ODR3</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR1</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ODR0</name>
|
|
<description>Port output data (y = 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSRR</name>
|
|
<displayName>BSRR</displayName>
|
|
<description>GPIO port bit set/reset register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port x reset bit y (y = 0..15)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS3</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS1</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BS0</name>
|
|
<description>Port x set bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LCKR</name>
|
|
<displayName>LCKR</displayName>
|
|
<description>GPIO port configuration lock register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LCKK</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK3</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK1</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK0</name>
|
|
<description>Port x lock bit y (y= 0..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRL</name>
|
|
<displayName>AFRL</displayName>
|
|
<description>GPIO alternate function low register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL3</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL1</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL0</name>
|
|
<description>Alternate function selection for port x bit y (y = 0..7)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRH</name>
|
|
<displayName>AFRH</displayName>
|
|
<description>GPIO alternate function high register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>AFSEL15</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL14</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL13</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL12</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL11</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL10</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL9</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSEL8</name>
|
|
<description>Alternate function selection for port x bit y (y = 8..15)</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BRR</name>
|
|
<displayName>BRR</displayName>
|
|
<description>port bit reset register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BR0</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR1</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR3</name>
|
|
<description>Port Reset bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>SAI1</name>
|
|
<description>Serial audio interface</description>
|
|
<groupName>SAI</groupName>
|
|
<baseAddress>0x40015400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>SAI1</name>
|
|
<description>SAI1 global interrupt</description>
|
|
<value>38</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>GCR</name>
|
|
<displayName>GCR</displayName>
|
|
<description>Global configuration register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNCOUT</name>
|
|
<description>Synchronization outputs</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCIN</name>
|
|
<description>Synchronization inputs</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BCR1</name>
|
|
<displayName>BCR1</displayName>
|
|
<description>BConfiguration register 1</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000040</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MCKEN</name>
|
|
<description>Master clock generation enable</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSR</name>
|
|
<description>Oversampling ratio for master clock</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MCJDIV</name>
|
|
<description>Master clock divider</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NODIV</name>
|
|
<description>No divider</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAEN</name>
|
|
<description>DMA enable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SAIBEN</name>
|
|
<description>Audio block B enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OutDri</name>
|
|
<description>Output drive</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MONO</name>
|
|
<description>Mono mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCEN</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKSTR</name>
|
|
<description>Clock strobing edge</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSBFIRST</name>
|
|
<description>Least significant bit first</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DS</name>
|
|
<description>Data size</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRTCFG</name>
|
|
<description>Protocol configuration</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODE</name>
|
|
<description>Audio block mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BCR2</name>
|
|
<displayName>BCR2</displayName>
|
|
<description>BConfiguration register 2</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COMP</name>
|
|
<description>Companding mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPL</name>
|
|
<description>Complement bit</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTECN</name>
|
|
<description>Mute counter</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEVAL</name>
|
|
<description>Mute value</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTE</name>
|
|
<description>Mute</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRIS</name>
|
|
<description>Tristate management on data line</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FFLUS</name>
|
|
<description>FIFO flush</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FTH</name>
|
|
<description>FIFO threshold</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BFRCR</name>
|
|
<displayName>BFRCR</displayName>
|
|
<description>BFRCR</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000007</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FSOFF</name>
|
|
<description>Frame synchronization offset</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSPOL</name>
|
|
<description>Frame synchronization polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSDEF</name>
|
|
<description>Frame synchronization definition</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSALL</name>
|
|
<description>Frame synchronization active level length</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FRL</name>
|
|
<description>Frame length</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSLOTR</name>
|
|
<displayName>BSLOTR</displayName>
|
|
<description>BSlot register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SLOTEN</name>
|
|
<description>Slot enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBSLOT</name>
|
|
<description>Number of slots in an audio frame</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SLOTSZ</name>
|
|
<description>Slot size</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FBOFF</name>
|
|
<description>First bit offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BIM</name>
|
|
<displayName>BIM</displayName>
|
|
<description>BInterrupt mask register2</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LFSDETIE</name>
|
|
<description>Late frame synchronization detection interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSDETIE</name>
|
|
<description>Anticipated frame synchronization detection interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNRDYIE</name>
|
|
<description>Codec not ready interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FREQIE</name>
|
|
<description>FIFO request interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WCKCFG</name>
|
|
<description>Wrong clock configuration interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEDET</name>
|
|
<description>Mute detection interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRUDRIE</name>
|
|
<description>Overrun/underrun interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BSR</name>
|
|
<displayName>BSR</displayName>
|
|
<description>BStatus register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000008</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLVL</name>
|
|
<description>FIFO level threshold</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LFSDET</name>
|
|
<description>Late frame synchronization detection</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSDET</name>
|
|
<description>Anticipated frame synchronization detection</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNRDY</name>
|
|
<description>Codec not ready</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FREQ</name>
|
|
<description>FIFO request</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WCKCFG</name>
|
|
<description>Wrong clock configuration flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEDET</name>
|
|
<description>Mute detection</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRUDR</name>
|
|
<description>Overrun / underrun</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BCLRFR</name>
|
|
<displayName>BCLRFR</displayName>
|
|
<description>BClear flag register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LFSDET</name>
|
|
<description>Clear late frame synchronization detection flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CAFSDET</name>
|
|
<description>Clear anticipated frame synchronization detection flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNRDY</name>
|
|
<description>Clear codec not ready flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WCKCFG</name>
|
|
<description>Clear wrong clock configuration flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEDET</name>
|
|
<description>Mute detection flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRUDR</name>
|
|
<description>Clear overrun / underrun</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BDR</name>
|
|
<displayName>BDR</displayName>
|
|
<description>BData register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DATA</name>
|
|
<description>Data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ACR1</name>
|
|
<displayName>ACR1</displayName>
|
|
<description>AConfiguration register 1</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000040</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MCKEN</name>
|
|
<description>Master clock generation enable</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSR</name>
|
|
<description>Oversampling ratio for master clock</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MCJDIV</name>
|
|
<description>Master clock divider</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NODIV</name>
|
|
<description>No divider</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAEN</name>
|
|
<description>DMA enable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SAIBEN</name>
|
|
<description>Audio block B enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OutDri</name>
|
|
<description>Output drive</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MONO</name>
|
|
<description>Mono mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCEN</name>
|
|
<description>Synchronization enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKSTR</name>
|
|
<description>Clock strobing edge</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSBFIRST</name>
|
|
<description>Least significant bit first</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DS</name>
|
|
<description>Data size</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRTCFG</name>
|
|
<description>Protocol configuration</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODE</name>
|
|
<description>Audio block mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ACR2</name>
|
|
<displayName>ACR2</displayName>
|
|
<description>AConfiguration register 2</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COMP</name>
|
|
<description>Companding mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPL</name>
|
|
<description>Complement bit</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTECN</name>
|
|
<description>Mute counter</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEVAL</name>
|
|
<description>Mute value</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTE</name>
|
|
<description>Mute</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRIS</name>
|
|
<description>Tristate management on data line</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FFLUS</name>
|
|
<description>FIFO flush</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FTH</name>
|
|
<description>FIFO threshold</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFRCR</name>
|
|
<displayName>AFRCR</displayName>
|
|
<description>AFRCR</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000007</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FSOFF</name>
|
|
<description>Frame synchronization offset</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSPOL</name>
|
|
<description>Frame synchronization polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSDEF</name>
|
|
<description>Frame synchronization definition</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSALL</name>
|
|
<description>Frame synchronization active level length</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FRL</name>
|
|
<description>Frame length</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ASLOTR</name>
|
|
<displayName>ASLOTR</displayName>
|
|
<description>ASlot register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SLOTEN</name>
|
|
<description>Slot enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBSLOT</name>
|
|
<description>Number of slots in an audio frame</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SLOTSZ</name>
|
|
<description>Slot size</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FBOFF</name>
|
|
<description>First bit offset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AIM</name>
|
|
<displayName>AIM</displayName>
|
|
<description>AInterrupt mask register2</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LFSDET</name>
|
|
<description>Late frame synchronization detection interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSDETIE</name>
|
|
<description>Anticipated frame synchronization detection interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNRDYIE</name>
|
|
<description>Codec not ready interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FREQIE</name>
|
|
<description>FIFO request interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WCKCFG</name>
|
|
<description>Wrong clock configuration interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEDET</name>
|
|
<description>Mute detection interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRUDRIE</name>
|
|
<description>Overrun/underrun interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ASR</name>
|
|
<displayName>ASR</displayName>
|
|
<description>AStatus register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000008</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FLVL</name>
|
|
<description>FIFO level threshold</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LFSDET</name>
|
|
<description>Late frame synchronization detection</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AFSDET</name>
|
|
<description>Anticipated frame synchronization detection</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNRDY</name>
|
|
<description>Codec not ready</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FREQ</name>
|
|
<description>FIFO request</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WCKCFG</name>
|
|
<description>Wrong clock configuration flag. This bit is read only</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEDET</name>
|
|
<description>Mute detection</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRUDR</name>
|
|
<description>Overrun / underrun</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ACLRFR</name>
|
|
<displayName>ACLRFR</displayName>
|
|
<description>AClear flag register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LFSDET</name>
|
|
<description>Clear late frame synchronization detection flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CAFSDET</name>
|
|
<description>Clear anticipated frame synchronization detection flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNRDY</name>
|
|
<description>Clear codec not ready flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WCKCFG</name>
|
|
<description>Clear wrong clock configuration flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUTEDET</name>
|
|
<description>Mute detection flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRUDR</name>
|
|
<description>Clear overrun / underrun</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADR</name>
|
|
<displayName>ADR</displayName>
|
|
<description>AData register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DATA</name>
|
|
<description>Data</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDMCR</name>
|
|
<displayName>PDMCR</displayName>
|
|
<description>PDM control register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CKEN4</name>
|
|
<description>Clock enable of bitstream clock number 4</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKEN3</name>
|
|
<description>Clock enable of bitstream clock number 3</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKEN2</name>
|
|
<description>Clock enable of bitstream clock number 2</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKEN1</name>
|
|
<description>Clock enable of bitstream clock number 1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MICNBR</name>
|
|
<description>Number of microphones</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PDMEN</name>
|
|
<description>PDM enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PDMDLY</name>
|
|
<displayName>PDMDLY</displayName>
|
|
<description>PDM delay register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DLYM4R</name>
|
|
<description>Delay line for second microphone of pair 4</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM4L</name>
|
|
<description>Delay line for first microphone of pair 4</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM3R</name>
|
|
<description>Delay line for second microphone of pair 3</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM3L</name>
|
|
<description>Delay line for first microphone of pair 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM2R</name>
|
|
<description>Delay line for second microphone of pair 2</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM2L</name>
|
|
<description>Delay line for first microphone of pair 2</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM1R</name>
|
|
<description>Delay line for second microphone of pair 1</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DLYM1L</name>
|
|
<description>Delay line for first microphone of pair 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>TIM2</name>
|
|
<description>General-purpose-timers</description>
|
|
<groupName>TIM</groupName>
|
|
<baseAddress>0x40000000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>TIM2</name>
|
|
<description>TIM2 global interrupt</description>
|
|
<value>28</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UIFREMAP</name>
|
|
<description>UIF status bit remapping</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKD</name>
|
|
<description>Clock division</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARPE</name>
|
|
<description>Auto-reload preload enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMS</name>
|
|
<description>Center-aligned mode selection</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPM</name>
|
|
<description>One-pulse mode</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>URS</name>
|
|
<description>Update request source</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDIS</name>
|
|
<description>Update disable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CEN</name>
|
|
<description>Counter enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TI1S</name>
|
|
<description>TI1 selection</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MMS</name>
|
|
<description>Master mode selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCDS</name>
|
|
<description>Capture/compare DMA selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SMCR</name>
|
|
<displayName>SMCR</displayName>
|
|
<description>slave mode control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SMS_3</name>
|
|
<description>Slave mode selection - bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETP</name>
|
|
<description>External trigger polarity</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ECE</name>
|
|
<description>External clock enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETPS</name>
|
|
<description>External trigger prescaler</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETF</name>
|
|
<description>External trigger filter</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSM</name>
|
|
<description>Master/Slave mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TS</name>
|
|
<description>Trigger selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OCCS</name>
|
|
<description>OCREF clear selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMS</name>
|
|
<description>Slave mode selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DIER</name>
|
|
<displayName>DIER</displayName>
|
|
<description>DMA/Interrupt enable register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC4DE</name>
|
|
<description>Capture/Compare 4 DMA request enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3DE</name>
|
|
<description>Capture/Compare 3 DMA request enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2DE</name>
|
|
<description>Capture/Compare 2 DMA request enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1DE</name>
|
|
<description>Capture/Compare 1 DMA request enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDE</name>
|
|
<description>Update DMA request enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIE</name>
|
|
<description>Trigger interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4IE</name>
|
|
<description>Capture/Compare 4 interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3IE</name>
|
|
<description>Capture/Compare 3 interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2IE</name>
|
|
<description>Capture/Compare 2 interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IE</name>
|
|
<description>Capture/Compare 1 interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIE</name>
|
|
<description>Update interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC4OF</name>
|
|
<description>Capture/Compare 4 overcapture flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3OF</name>
|
|
<description>Capture/Compare 3 overcapture flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2OF</name>
|
|
<description>Capture/compare 2 overcapture flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1OF</name>
|
|
<description>Capture/Compare 1 overcapture flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIF</name>
|
|
<description>Trigger interrupt flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4IF</name>
|
|
<description>Capture/Compare 4 interrupt flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3IF</name>
|
|
<description>Capture/Compare 3 interrupt flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2IF</name>
|
|
<description>Capture/Compare 2 interrupt flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IF</name>
|
|
<description>Capture/compare 1 interrupt flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIF</name>
|
|
<description>Update interrupt flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EGR</name>
|
|
<displayName>EGR</displayName>
|
|
<description>event generation register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TG</name>
|
|
<description>Trigger generation</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4G</name>
|
|
<description>Capture/compare 4 generation</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3G</name>
|
|
<description>Capture/compare 3 generation</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2G</name>
|
|
<description>Capture/compare 2 generation</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1G</name>
|
|
<description>Capture/compare 1 generation</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UG</name>
|
|
<description>Update generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Output</name>
|
|
<displayName>CCMR1_Output</displayName>
|
|
<description>capture/compare mode register 1 (output mode)</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OC2M_3</name>
|
|
<description>Output Compare 2 mode - bit 3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1M_3</name>
|
|
<description>Output Compare 1 mode - bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2CE</name>
|
|
<description>Output compare 2 clear enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2M</name>
|
|
<description>Output compare 2 mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2PE</name>
|
|
<description>Output compare 2 preload enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2FE</name>
|
|
<description>Output compare 2 fast enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2S</name>
|
|
<description>Capture/Compare 2 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1CE</name>
|
|
<description>Output compare 1 clear enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1M</name>
|
|
<description>Output compare 1 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1PE</name>
|
|
<description>Output compare 1 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1FE</name>
|
|
<description>Output compare 1 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Input</name>
|
|
<displayName>CCMR1_Input</displayName>
|
|
<description>capture/compare mode register 1 (input mode)</description>
|
|
<alternateRegister>CCMR1_Output</alternateRegister>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IC2F</name>
|
|
<description>Input capture 2 filter</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC2PSC</name>
|
|
<description>Input capture 2 prescaler</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2S</name>
|
|
<description>Capture/compare 2 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC1F</name>
|
|
<description>Input capture 1 filter</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC1PSC</name>
|
|
<description>Input capture 1 prescaler</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR2_Output</name>
|
|
<displayName>CCMR2_Output</displayName>
|
|
<description>capture/compare mode register 2 (output mode)</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OC4M_3</name>
|
|
<description>Output Compare 4 mode - bit 3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3M_3</name>
|
|
<description>Output Compare 3 mode - bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4CE</name>
|
|
<description>Output compare 4 clear enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4M</name>
|
|
<description>Output compare 4 mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4PE</name>
|
|
<description>Output compare 4 preload enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4FE</name>
|
|
<description>Output compare 4 fast enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4S</name>
|
|
<description>Capture/Compare 4 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3CE</name>
|
|
<description>Output compare 3 clear enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3M</name>
|
|
<description>Output compare 3 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3PE</name>
|
|
<description>Output compare 3 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3FE</name>
|
|
<description>Output compare 3 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3S</name>
|
|
<description>Capture/Compare 3 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR2_Input</name>
|
|
<displayName>CCMR2_Input</displayName>
|
|
<description>capture/compare mode register 2 (input mode)</description>
|
|
<alternateRegister>CCMR2_Output</alternateRegister>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IC4F</name>
|
|
<description>Input capture 4 filter</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC4PSC</name>
|
|
<description>Input capture 4 prescaler</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4S</name>
|
|
<description>Capture/Compare 4 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC3F</name>
|
|
<description>Input capture 3 filter</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC3PSC</name>
|
|
<description>Input capture 3 prescaler</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3S</name>
|
|
<description>Capture/Compare 3 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCER</name>
|
|
<displayName>CCER</displayName>
|
|
<description>capture/compare enable register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC4NP</name>
|
|
<description>Capture/Compare 4 output Polarity</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4P</name>
|
|
<description>Capture/Compare 3 output Polarity</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4E</name>
|
|
<description>Capture/Compare 4 output enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3NP</name>
|
|
<description>Capture/Compare 3 output Polarity</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3P</name>
|
|
<description>Capture/Compare 3 output Polarity</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3E</name>
|
|
<description>Capture/Compare 3 output enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2NP</name>
|
|
<description>Capture/Compare 2 output Polarity</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2P</name>
|
|
<description>Capture/Compare 2 output Polarity</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2E</name>
|
|
<description>Capture/Compare 2 output enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1NP</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1P</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1E</name>
|
|
<description>Capture/Compare 1 output enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNT</name>
|
|
<displayName>CNT</displayName>
|
|
<description>counter</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT_H</name>
|
|
<description>High counter value (TIM2 only)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>CNT_L</name>
|
|
<description>Low counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>UIFCPY</name>
|
|
<description>Value depends on IUFREMAP in TIM2_CR1.</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PSC</name>
|
|
<displayName>PSC</displayName>
|
|
<description>prescaler</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PSC</name>
|
|
<description>Prescaler value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ARR</name>
|
|
<displayName>ARR</displayName>
|
|
<description>auto-reload register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ARR_H</name>
|
|
<description>High Auto-reload value (TIM2 only)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARR_L</name>
|
|
<description>Low Auto-reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR1</name>
|
|
<displayName>CCR1</displayName>
|
|
<description>capture/compare register 1</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR1_H</name>
|
|
<description>High Capture/Compare 1 value (TIM2 only)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCR1_L</name>
|
|
<description>Low Capture/Compare 1 value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR2</name>
|
|
<displayName>CCR2</displayName>
|
|
<description>capture/compare register 2</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR2_H</name>
|
|
<description>High Capture/Compare 2 value (TIM2 only)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCR2_L</name>
|
|
<description>Low Capture/Compare 2 value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR3</name>
|
|
<displayName>CCR3</displayName>
|
|
<description>capture/compare register 3</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR3_H</name>
|
|
<description>High Capture/Compare value (TIM2 only)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCR3_L</name>
|
|
<description>Low Capture/Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR4</name>
|
|
<displayName>CCR4</displayName>
|
|
<description>capture/compare register 4</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR4_H</name>
|
|
<description>High Capture/Compare value (TIM2 only)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCR4_L</name>
|
|
<description>Low Capture/Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DCR</name>
|
|
<displayName>DCR</displayName>
|
|
<description>DMA control register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBL</name>
|
|
<description>DMA burst length</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBA</name>
|
|
<description>DMA base address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DMAR</name>
|
|
<displayName>DMAR</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DMAB</name>
|
|
<description>DMA register for burst accesses</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OR</name>
|
|
<displayName>OR</displayName>
|
|
<description>TIM2 option register</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TI4_RMP</name>
|
|
<description>Input capture 4 remap</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETR_RMP</name>
|
|
<description>External trigger remap</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ITR_RMP</name>
|
|
<description>Internal trigger remap</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AF</name>
|
|
<displayName>AF</displayName>
|
|
<description>TIM2 alternate function option register 1</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ETRSEL</name>
|
|
<description>External trigger source selection</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>TIM16</name>
|
|
<description>General purpose timers</description>
|
|
<groupName>TIM</groupName>
|
|
<baseAddress>0x40014400</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CEN</name>
|
|
<description>Counter enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDIS</name>
|
|
<description>Update disable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>URS</name>
|
|
<description>Update request source</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPM</name>
|
|
<description>One-pulse mode</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARPE</name>
|
|
<description>Auto-reload preload enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKD</name>
|
|
<description>Clock division</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIFREMAP</name>
|
|
<description>UIF status bit remapping</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OIS1N</name>
|
|
<description>Output Idle state 1</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS1</name>
|
|
<description>Output Idle state 1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCDS</name>
|
|
<description>Capture/compare DMA selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCUS</name>
|
|
<description>Capture/compare control update selection</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCPC</name>
|
|
<description>Capture/compare preloaded control</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DIER</name>
|
|
<displayName>DIER</displayName>
|
|
<description>DMA/Interrupt enable register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UIE</name>
|
|
<description>Update interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IE</name>
|
|
<description>Capture/Compare 1 interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMIE</name>
|
|
<description>COM interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIE</name>
|
|
<description>Break interrupt enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDE</name>
|
|
<description>Update DMA request enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1DE</name>
|
|
<description>Capture/Compare 1 DMA request enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1OF</name>
|
|
<description>Capture/Compare 1 overcapture flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIF</name>
|
|
<description>Break interrupt flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMIF</name>
|
|
<description>COM interrupt flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IF</name>
|
|
<description>Capture/compare 1 interrupt flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIF</name>
|
|
<description>Update interrupt flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EGR</name>
|
|
<displayName>EGR</displayName>
|
|
<description>event generation register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BG</name>
|
|
<description>Break generation</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMG</name>
|
|
<description>Capture/Compare control update generation</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1G</name>
|
|
<description>Capture/compare 1 generation</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UG</name>
|
|
<description>Update generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Output</name>
|
|
<displayName>CCMR1_Output</displayName>
|
|
<description>capture/compare mode register (output mode)</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OC1M_3</name>
|
|
<description>Output Compare 1 mode</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1M</name>
|
|
<description>Output Compare 1 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1PE</name>
|
|
<description>Output Compare 1 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1FE</name>
|
|
<description>Output Compare 1 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Input</name>
|
|
<displayName>CCMR1_Input</displayName>
|
|
<description>capture/compare mode register 1 (input mode)</description>
|
|
<alternateRegister>CCMR1_Output</alternateRegister>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IC1F</name>
|
|
<description>Input capture 1 filter</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC1PSC</name>
|
|
<description>Input capture 1 prescaler</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCER</name>
|
|
<displayName>CCER</displayName>
|
|
<description>capture/compare enable register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1NP</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1NE</name>
|
|
<description>Capture/Compare 1 complementary output enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1P</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1E</name>
|
|
<description>Capture/Compare 1 output enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNT</name>
|
|
<displayName>CNT</displayName>
|
|
<description>counter</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>UIFCPY</name>
|
|
<description>UIF Copy</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PSC</name>
|
|
<displayName>PSC</displayName>
|
|
<description>prescaler</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PSC</name>
|
|
<description>Prescaler value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ARR</name>
|
|
<displayName>ARR</displayName>
|
|
<description>auto-reload register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ARR</name>
|
|
<description>Auto-reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RCR</name>
|
|
<displayName>RCR</displayName>
|
|
<description>repetition counter register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>REP</name>
|
|
<description>Repetition counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR1</name>
|
|
<displayName>CCR1</displayName>
|
|
<description>capture/compare register 1</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR1</name>
|
|
<description>Capture/Compare 1 value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BDTR</name>
|
|
<displayName>BDTR</displayName>
|
|
<description>break and dead-time register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DTG</name>
|
|
<description>Dead-time generator setup</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>Lock configuration</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSSI</name>
|
|
<description>Off-state selection for Idle mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSSR</name>
|
|
<description>Off-state selection for Run mode</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKE</name>
|
|
<description>Break enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>Break polarity</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AOE</name>
|
|
<description>Automatic output enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MOE</name>
|
|
<description>Main output enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKDSRM</name>
|
|
<description>Break Disarm</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKBID</name>
|
|
<description>Break Bidirectional</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DCR</name>
|
|
<displayName>DCR</displayName>
|
|
<description>DMA control register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBL</name>
|
|
<description>DMA burst length</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBA</name>
|
|
<description>DMA base address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DMAR</name>
|
|
<displayName>DMAR</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DMAB</name>
|
|
<description>DMA register for burst accesses</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OR1</name>
|
|
<displayName>OR1</displayName>
|
|
<description>TIM option register 1</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TI1_RMP</name>
|
|
<description>Input capture 1 remap</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AF1</name>
|
|
<displayName>AF1</displayName>
|
|
<description>alternate function register 1</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKINE</name>
|
|
<description>BRK BKIN input enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP1E</name>
|
|
<description>BRK COMP1 enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP2E</name>
|
|
<description>BRK COMP2 enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKINP</name>
|
|
<description>BRK BKIN input polarity</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP1P</name>
|
|
<description>BRK COMP1 input polarity</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP2P</name>
|
|
<description>BRK COMP2 input polarit</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TISEL</name>
|
|
<displayName>TISEL</displayName>
|
|
<description>input selection register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TI1SEL</name>
|
|
<description>selects TI1[0] to TI1[15] input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>TIM17</name>
|
|
<description>General purpose timers</description>
|
|
<groupName>TIM</groupName>
|
|
<baseAddress>0x40014800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CEN</name>
|
|
<description>Counter enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDIS</name>
|
|
<description>Update disable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>URS</name>
|
|
<description>Update request source</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPM</name>
|
|
<description>One-pulse mode</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARPE</name>
|
|
<description>Auto-reload preload enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKD</name>
|
|
<description>Clock division</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIFREMAP</name>
|
|
<description>UIF status bit remapping</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OIS1N</name>
|
|
<description>Output Idle state 1</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS1</name>
|
|
<description>Output Idle state 1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCDS</name>
|
|
<description>Capture/compare DMA selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCUS</name>
|
|
<description>Capture/compare control update selection</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCPC</name>
|
|
<description>Capture/compare preloaded control</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DIER</name>
|
|
<displayName>DIER</displayName>
|
|
<description>DMA/Interrupt enable register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UIE</name>
|
|
<description>Update interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IE</name>
|
|
<description>Capture/Compare 1 interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMIE</name>
|
|
<description>COM interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIE</name>
|
|
<description>Break interrupt enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDE</name>
|
|
<description>Update DMA request enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1DE</name>
|
|
<description>Capture/Compare 1 DMA request enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1OF</name>
|
|
<description>Capture/Compare 1 overcapture flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIF</name>
|
|
<description>Break interrupt flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMIF</name>
|
|
<description>COM interrupt flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IF</name>
|
|
<description>Capture/compare 1 interrupt flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIF</name>
|
|
<description>Update interrupt flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EGR</name>
|
|
<displayName>EGR</displayName>
|
|
<description>event generation register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BG</name>
|
|
<description>Break generation</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMG</name>
|
|
<description>Capture/Compare control update generation</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1G</name>
|
|
<description>Capture/compare 1 generation</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UG</name>
|
|
<description>Update generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Output</name>
|
|
<displayName>CCMR1_Output</displayName>
|
|
<description>capture/compare mode register (output mode)</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OC1M_3</name>
|
|
<description>Output Compare 1 mode</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1M</name>
|
|
<description>Output Compare 1 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1PE</name>
|
|
<description>Output Compare 1 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1FE</name>
|
|
<description>Output Compare 1 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Input</name>
|
|
<displayName>CCMR1_Input</displayName>
|
|
<description>capture/compare mode register 1 (input mode)</description>
|
|
<alternateRegister>CCMR1_Output</alternateRegister>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IC1F</name>
|
|
<description>Input capture 1 filter</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC1PSC</name>
|
|
<description>Input capture 1 prescaler</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCER</name>
|
|
<displayName>CCER</displayName>
|
|
<description>capture/compare enable register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1NP</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1NE</name>
|
|
<description>Capture/Compare 1 complementary output enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1P</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1E</name>
|
|
<description>Capture/Compare 1 output enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNT</name>
|
|
<displayName>CNT</displayName>
|
|
<description>counter</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>UIFCPY</name>
|
|
<description>UIF Copy</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PSC</name>
|
|
<displayName>PSC</displayName>
|
|
<description>prescaler</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PSC</name>
|
|
<description>Prescaler value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ARR</name>
|
|
<displayName>ARR</displayName>
|
|
<description>auto-reload register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ARR</name>
|
|
<description>Auto-reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RCR</name>
|
|
<displayName>RCR</displayName>
|
|
<description>repetition counter register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>REP</name>
|
|
<description>Repetition counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR1</name>
|
|
<displayName>CCR1</displayName>
|
|
<description>capture/compare register 1</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR1</name>
|
|
<description>Capture/Compare 1 value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BDTR</name>
|
|
<displayName>BDTR</displayName>
|
|
<description>break and dead-time register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DTG</name>
|
|
<description>Dead-time generator setup</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>Lock configuration</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSSI</name>
|
|
<description>Off-state selection for Idle mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSSR</name>
|
|
<description>Off-state selection for Run mode</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKE</name>
|
|
<description>Break enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>Break polarity</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AOE</name>
|
|
<description>Automatic output enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MOE</name>
|
|
<description>Main output enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKDSRM</name>
|
|
<description>Break Disarm</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKBID</name>
|
|
<description>Break Bidirectional</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DCR</name>
|
|
<displayName>DCR</displayName>
|
|
<description>DMA control register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBL</name>
|
|
<description>DMA burst length</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBA</name>
|
|
<description>DMA base address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DMAR</name>
|
|
<displayName>DMAR</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DMAB</name>
|
|
<description>DMA register for burst accesses</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OR1</name>
|
|
<displayName>OR1</displayName>
|
|
<description>TIM option register 1</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TI1_RMP</name>
|
|
<description>Input capture 1 remap</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AF1</name>
|
|
<displayName>AF1</displayName>
|
|
<description>alternate function register 1</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKINE</name>
|
|
<description>BRK BKIN input enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP1E</name>
|
|
<description>BRK COMP1 enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP2E</name>
|
|
<description>BRK COMP2 enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKINP</name>
|
|
<description>BRK BKIN input polarity</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP1P</name>
|
|
<description>BRK COMP1 input polarity</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP2P</name>
|
|
<description>BRK COMP2 input polarit</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TISEL</name>
|
|
<displayName>TISEL</displayName>
|
|
<description>input selection register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TI1SEL</name>
|
|
<description>selects TI1[0] to TI1[15] input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>TIM1</name>
|
|
<description>Advanced-timers</description>
|
|
<groupName>TIM</groupName>
|
|
<baseAddress>0x40012C00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>TIM1_BRK</name>
|
|
<description>Timer 1 break interrupt</description>
|
|
<value>24</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>TIM1_UP</name>
|
|
<description>Timer 1 Update</description>
|
|
<value>25</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>TIM1_TRG_COM_TIM17</name>
|
|
<description>TIM1 Trigger and Commutation interrupts and
|
|
TIM17 global interrupt</description>
|
|
<value>26</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>TIM1_CC</name>
|
|
<description>TIM1 Capture Compare interrupt</description>
|
|
<value>27</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CEN</name>
|
|
<description>Counter enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OPM</name>
|
|
<description>One-pulse mode</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDIS</name>
|
|
<description>Update disable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>URS</name>
|
|
<description>Update request source</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Direction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMS</name>
|
|
<description>Center-aligned mode selection</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARPE</name>
|
|
<description>Auto-reload preload enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKD</name>
|
|
<description>Clock division</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UIFREMAP</name>
|
|
<description>UIF status bit remapping</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MMS2</name>
|
|
<description>Master mode selection 2</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS6</name>
|
|
<description>Output Idle state 6 (OC6 output)</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS5</name>
|
|
<description>Output Idle state 5 (OC5 output)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS4</name>
|
|
<description>Output Idle state 4</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS3N</name>
|
|
<description>Output Idle state 3</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS3</name>
|
|
<description>Output Idle state 3</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS2N</name>
|
|
<description>Output Idle state 2</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS2</name>
|
|
<description>Output Idle state 2</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS1N</name>
|
|
<description>Output Idle state 1</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OIS1</name>
|
|
<description>Output Idle state 1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TI1S</name>
|
|
<description>TI1 selection</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MMS</name>
|
|
<description>Master mode selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCDS</name>
|
|
<description>Capture/compare DMA selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCUS</name>
|
|
<description>Capture/compare control update selection</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CCPC</name>
|
|
<description>Capture/compare preloaded control</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SMCR</name>
|
|
<displayName>SMCR</displayName>
|
|
<description>slave mode control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SMS</name>
|
|
<description>Slave mode selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OCCS</name>
|
|
<description>OCREF clear selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TS</name>
|
|
<description>Trigger selection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSM</name>
|
|
<description>Master/Slave mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETF</name>
|
|
<description>External trigger filter</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETPS</name>
|
|
<description>External trigger prescaler</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ECE</name>
|
|
<description>External clock enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETP</name>
|
|
<description>External trigger polarity</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SMS_3</name>
|
|
<description>Slave mode selection - bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DIER</name>
|
|
<displayName>DIER</displayName>
|
|
<description>DMA/Interrupt enable register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UIE</name>
|
|
<description>Update interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IE</name>
|
|
<description>Capture/Compare 1 interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2IE</name>
|
|
<description>Capture/Compare 2 interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3IE</name>
|
|
<description>Capture/Compare 3 interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4IE</name>
|
|
<description>Capture/Compare 4 interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMIE</name>
|
|
<description>COM interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIE</name>
|
|
<description>Trigger interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIE</name>
|
|
<description>Break interrupt enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDE</name>
|
|
<description>Update DMA request enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1DE</name>
|
|
<description>Capture/Compare 1 DMA request enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2DE</name>
|
|
<description>Capture/Compare 2 DMA request enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3DE</name>
|
|
<description>Capture/Compare 3 DMA request enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4DE</name>
|
|
<description>Capture/Compare 4 DMA request enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMDE</name>
|
|
<description>COM DMA request enable</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TDE</name>
|
|
<description>Trigger DMA request enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UIF</name>
|
|
<description>Update interrupt flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1IF</name>
|
|
<description>Capture/compare 1 interrupt flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2IF</name>
|
|
<description>Capture/Compare 2 interrupt flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3IF</name>
|
|
<description>Capture/Compare 3 interrupt flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4IF</name>
|
|
<description>Capture/Compare 4 interrupt flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMIF</name>
|
|
<description>COM interrupt flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIF</name>
|
|
<description>Trigger interrupt flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIF</name>
|
|
<description>Break interrupt flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>B2IF</name>
|
|
<description>Break 2 interrupt flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1OF</name>
|
|
<description>Capture/Compare 1 overcapture flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2OF</name>
|
|
<description>Capture/compare 2 overcapture flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3OF</name>
|
|
<description>Capture/Compare 3 overcapture flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4OF</name>
|
|
<description>Capture/Compare 4 overcapture flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SBIF</name>
|
|
<description>System Break interrupt flag</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC5IF</name>
|
|
<description>Compare 5 interrupt flag</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC6IF</name>
|
|
<description>Compare 6 interrupt flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EGR</name>
|
|
<displayName>EGR</displayName>
|
|
<description>event generation register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>UG</name>
|
|
<description>Update generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1G</name>
|
|
<description>Capture/compare 1 generation</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2G</name>
|
|
<description>Capture/compare 2 generation</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3G</name>
|
|
<description>Capture/compare 3 generation</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4G</name>
|
|
<description>Capture/compare 4 generation</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COMG</name>
|
|
<description>Capture/Compare control update generation</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TG</name>
|
|
<description>Trigger generation</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BG</name>
|
|
<description>Break generation</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>B2G</name>
|
|
<description>Break 2 generation</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Input</name>
|
|
<displayName>CCMR1_Input</displayName>
|
|
<description>capture/compare mode register 1 (output mode)</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC1PSC</name>
|
|
<description>Input capture 1 prescaler</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C1F</name>
|
|
<description>Input capture 1 filter</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2S</name>
|
|
<description>capture/Compare 2 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC2PSC</name>
|
|
<description>Input capture 2 prescaler</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC2F</name>
|
|
<description>Input capture 2 filter</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR1_Output</name>
|
|
<displayName>CCMR1_Output</displayName>
|
|
<description>capture/compare mode register 1 (output mode)</description>
|
|
<alternateRegister>CCMR1_Input</alternateRegister>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1S</name>
|
|
<description>Capture/Compare 1 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1FE</name>
|
|
<description>Output Compare 1 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1PE</name>
|
|
<description>Output Compare 1 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1M</name>
|
|
<description>Output Compare 1 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1CE</name>
|
|
<description>Output Compare 1 clear enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2S</name>
|
|
<description>Capture/Compare 2 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2FE</name>
|
|
<description>Output Compare 2 fast enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2PE</name>
|
|
<description>Output Compare 2 preload enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2M</name>
|
|
<description>Output Compare 2 mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2CE</name>
|
|
<description>Output Compare 2 clear enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC1M_3</name>
|
|
<description>Output Compare 1 mode - bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC2M_3</name>
|
|
<description>Output Compare 2 mode - bit 3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR2_Output</name>
|
|
<displayName>CCMR2_Output</displayName>
|
|
<description>capture/compare mode register 2 (output mode)</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC3S</name>
|
|
<description>Capture/Compare 3 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3FE</name>
|
|
<description>Output compare 3 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3PE</name>
|
|
<description>Output compare 3 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3M</name>
|
|
<description>Output compare 3 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3CE</name>
|
|
<description>Output compare 3 clear enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4S</name>
|
|
<description>Capture/Compare 4 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4FE</name>
|
|
<description>Output compare 4 fast enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4PE</name>
|
|
<description>Output compare 4 preload enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4M</name>
|
|
<description>Output compare 4 mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4CE</name>
|
|
<description>Output compare 4 clear enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC3M_3</name>
|
|
<description>Output Compare 3 mode - bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC4M_3</name>
|
|
<description>Output Compare 4 mode - bit 3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR2_Input</name>
|
|
<displayName>CCMR2_Input</displayName>
|
|
<description>capture/compare mode register 2 (output mode)</description>
|
|
<alternateRegister>CCMR2_Output</alternateRegister>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC3S</name>
|
|
<description>Capture/Compare 3 selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C3PSC</name>
|
|
<description>Input capture 3 prescaler</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC3F</name>
|
|
<description>Input capture 3 filter</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4S</name>
|
|
<description>Capture/Compare 4 selection</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC4PSC</name>
|
|
<description>Input capture 4 prescaler</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IC4F</name>
|
|
<description>Input capture 4 filter</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCER</name>
|
|
<displayName>CCER</displayName>
|
|
<description>capture/compare enable register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CC1E</name>
|
|
<description>Capture/Compare 1 output enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1P</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1NE</name>
|
|
<description>Capture/Compare 1 complementary output enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC1NP</name>
|
|
<description>Capture/Compare 1 output Polarity</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2E</name>
|
|
<description>Capture/Compare 2 output enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2P</name>
|
|
<description>Capture/Compare 2 output Polarity</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2NE</name>
|
|
<description>Capture/Compare 2 complementary output enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC2NP</name>
|
|
<description>Capture/Compare 2 output Polarity</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3E</name>
|
|
<description>Capture/Compare 3 output enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3P</name>
|
|
<description>Capture/Compare 3 output Polarity</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3NE</name>
|
|
<description>Capture/Compare 3 complementary output enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC3NP</name>
|
|
<description>Capture/Compare 3 output Polarity</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4E</name>
|
|
<description>Capture/Compare 4 output enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4P</name>
|
|
<description>Capture/Compare 3 output Polarity</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC4NP</name>
|
|
<description>Capture/Compare 4 complementary output polarity</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC5E</name>
|
|
<description>Capture/Compare 5 output enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC5P</name>
|
|
<description>Capture/Compare 5 output polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC6E</name>
|
|
<description>Capture/Compare 6 output enable</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CC6P</name>
|
|
<description>Capture/Compare 6 output polarity</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNT</name>
|
|
<displayName>CNT</displayName>
|
|
<description>counter</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>UIFCPY</name>
|
|
<description>UIF copy</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PSC</name>
|
|
<displayName>PSC</displayName>
|
|
<description>prescaler</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PSC</name>
|
|
<description>Prescaler value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ARR</name>
|
|
<displayName>ARR</displayName>
|
|
<description>auto-reload register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000FFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ARR</name>
|
|
<description>Auto-reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RCR</name>
|
|
<displayName>RCR</displayName>
|
|
<description>repetition counter register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>REP</name>
|
|
<description>Repetition counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR1</name>
|
|
<displayName>CCR1</displayName>
|
|
<description>capture/compare register 1</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR1</name>
|
|
<description>Capture/Compare 1 value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR2</name>
|
|
<displayName>CCR2</displayName>
|
|
<description>capture/compare register 2</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR2</name>
|
|
<description>Capture/Compare 2 value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR3</name>
|
|
<displayName>CCR3</displayName>
|
|
<description>capture/compare register 3</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR3</name>
|
|
<description>Capture/Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR4</name>
|
|
<displayName>CCR4</displayName>
|
|
<description>capture/compare register 4</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR4</name>
|
|
<description>Capture/Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BDTR</name>
|
|
<displayName>BDTR</displayName>
|
|
<description>break and dead-time register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DTG</name>
|
|
<description>Dead-time generator setup</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LOCK</name>
|
|
<description>Lock configuration</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSSI</name>
|
|
<description>Off-state selection for Idle mode</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSSR</name>
|
|
<description>Off-state selection for Run mode</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKE</name>
|
|
<description>Break enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>Break polarity</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AOE</name>
|
|
<description>Automatic output enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MOE</name>
|
|
<description>Main output enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKF</name>
|
|
<description>Break filter</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2F</name>
|
|
<description>Break 2 filter</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2E</name>
|
|
<description>Break 2 enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2P</name>
|
|
<description>Break 2 polarity</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DCR</name>
|
|
<displayName>DCR</displayName>
|
|
<description>DMA control register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBL</name>
|
|
<description>DMA burst length</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBA</name>
|
|
<description>DMA base address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DMAR</name>
|
|
<displayName>DMAR</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DMAB</name>
|
|
<description>DMA register for burst accesses</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OR</name>
|
|
<displayName>OR</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TIM1_ETR_ADC1_RMP</name>
|
|
<description>TIM1_ETR_ADC1 remapping capability</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TI1_RMP</name>
|
|
<description>Input Capture 1 remap</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCMR3_Output</name>
|
|
<displayName>CCMR3_Output</displayName>
|
|
<description>capture/compare mode register 2 (output mode)</description>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OC6M_bit3</name>
|
|
<description>Output Compare 6 mode bit 3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC5M_bit3</name>
|
|
<description>Output Compare 5 mode bit 3</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC6CE</name>
|
|
<description>Output compare 6 clear enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC6M</name>
|
|
<description>Output compare 6 mode</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC6PE</name>
|
|
<description>Output compare 6 preload enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC6FE</name>
|
|
<description>Output compare 6 fast enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC5CE</name>
|
|
<description>Output compare 5 clear enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC5M</name>
|
|
<description>Output compare 5 mode</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC5PE</name>
|
|
<description>Output compare 5 preload enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OC5FE</name>
|
|
<description>Output compare 5 fast enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR5</name>
|
|
<displayName>CCR5</displayName>
|
|
<description>capture/compare register 4</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR5</name>
|
|
<description>Capture/Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GC5C1</name>
|
|
<description>Group Channel 5 and Channel 1</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GC5C2</name>
|
|
<description>Group Channel 5 and Channel 2</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>GC5C3</name>
|
|
<description>Group Channel 5 and Channel 3</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR6</name>
|
|
<displayName>CCR6</displayName>
|
|
<description>capture/compare register 4</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CCR6</name>
|
|
<description>Capture/Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AF1</name>
|
|
<displayName>AF1</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKINE</name>
|
|
<description>BRK BKIN input enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP1E</name>
|
|
<description>BRK COMP1 enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP2E</name>
|
|
<description>BRK COMP2 enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKINP</name>
|
|
<description>BRK BKIN input polarity</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP1P</name>
|
|
<description>BRK COMP1 input polarity</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKCMP2P</name>
|
|
<description>BRK COMP2 input polarity</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ETRSEL</name>
|
|
<description>ETR source selection</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AF2</name>
|
|
<displayName>AF2</displayName>
|
|
<description>DMA address for full transfer</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BK2INE</name>
|
|
<description>BRK2 BKIN input enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2CMP1E</name>
|
|
<description>BRK2 COMP1 enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2CMP2E</name>
|
|
<description>BRK2 COMP2 enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2DFBK0E</name>
|
|
<description>BRK2 DFSDM_BREAK0 enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2INP</name>
|
|
<description>BRK2 BKIN input polarity</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2CMP1P</name>
|
|
<description>BRK2 COMP1 input polarity</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BK2CMP2P</name>
|
|
<description>BRK2 COMP2 input polarity</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>LPTIM1</name>
|
|
<description>Low power timer</description>
|
|
<groupName>LPTIM</groupName>
|
|
<baseAddress>0x40007C00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>LPTIM1</name>
|
|
<description>LPtimer 1 global interrupt</description>
|
|
<value>47</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>Interrupt and Status Register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DOWN</name>
|
|
<description>Counter direction change up to down</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UP</name>
|
|
<description>Counter direction change down to up</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARROK</name>
|
|
<description>Autoreload register update OK</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMPOK</name>
|
|
<description>Compare register update OK</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTTRIG</name>
|
|
<description>External trigger edge event</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARRM</name>
|
|
<description>Autoreload match</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMPM</name>
|
|
<description>Compare match</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICR</name>
|
|
<displayName>ICR</displayName>
|
|
<description>Interrupt Clear Register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DOWNCF</name>
|
|
<description>Direction change to down Clear Flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UPCF</name>
|
|
<description>Direction change to UP Clear Flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARROKCF</name>
|
|
<description>Autoreload register update OK Clear Flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMPOKCF</name>
|
|
<description>Compare register update OK Clear Flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTTRIGCF</name>
|
|
<description>External trigger valid edge Clear Flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARRMCF</name>
|
|
<description>Autoreload match Clear Flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMPMCF</name>
|
|
<description>compare match Clear Flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IER</name>
|
|
<displayName>IER</displayName>
|
|
<description>Interrupt Enable Register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DOWNIE</name>
|
|
<description>Direction change to down Interrupt Enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UPIE</name>
|
|
<description>Direction change to UP Interrupt Enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARROKIE</name>
|
|
<description>Autoreload register update OK Interrupt Enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMPOKIE</name>
|
|
<description>Compare register update OK Interrupt Enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EXTTRIGIE</name>
|
|
<description>External trigger valid edge Interrupt Enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ARRMIE</name>
|
|
<description>Autoreload match Interrupt Enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMPMIE</name>
|
|
<description>Compare match Interrupt Enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFGR</name>
|
|
<displayName>CFGR</displayName>
|
|
<description>Configuration Register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ENC</name>
|
|
<description>Encoder mode enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COUNTMODE</name>
|
|
<description>counter mode enabled</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRELOAD</name>
|
|
<description>Registers update mode</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WAVPOL</name>
|
|
<description>Waveform shape polarity</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WAVE</name>
|
|
<description>Waveform shape</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TIMOUT</name>
|
|
<description>Timeout enable</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRIGEN</name>
|
|
<description>Trigger enable and polarity</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRIGSEL</name>
|
|
<description>Trigger selector</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRESC</name>
|
|
<description>Clock prescaler</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRGFLT</name>
|
|
<description>Configurable digital filter for trigger</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKFLT</name>
|
|
<description>Configurable digital filter for external clock</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKPOL</name>
|
|
<description>Clock Polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CKSEL</name>
|
|
<description>Clock selector</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Control Register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RSTARE</name>
|
|
<description>Reset after read enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COUNTRST</name>
|
|
<description>Counter reset</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CNTSTRT</name>
|
|
<description>Timer start in continuous mode</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SNGSTRT</name>
|
|
<description>LPTIM start in single mode</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ENABLE</name>
|
|
<description>LPTIM Enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CMP</name>
|
|
<displayName>CMP</displayName>
|
|
<description>Compare Register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CMP</name>
|
|
<description>Compare value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ARR</name>
|
|
<displayName>ARR</displayName>
|
|
<description>Autoreload Register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ARR</name>
|
|
<description>Auto reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNT</name>
|
|
<displayName>CNT</displayName>
|
|
<description>Counter Register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CNT</name>
|
|
<description>Counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OR</name>
|
|
<displayName>OR</displayName>
|
|
<description>Option Register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>OR1</name>
|
|
<description>Option register bit 1</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OR2</name>
|
|
<description>Option register bit 2</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral derivedFrom="LPTIM1">
|
|
<name>LPTIM2</name>
|
|
<baseAddress>0x40009400</baseAddress>
|
|
<interrupt>
|
|
<name>LPTIM2</name>
|
|
<description>LPtimer 2 global interrupt</description>
|
|
<value>48</value>
|
|
</interrupt>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>USART1</name>
|
|
<description>Universal synchronous asynchronous receiver transmitter</description>
|
|
<groupName>USART</groupName>
|
|
<baseAddress>0x40013800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>USART1</name>
|
|
<description>USART1 global interrupt</description>
|
|
<value>36</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>Control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RXFFIE</name>
|
|
<description>RXFIFO Full interrupt enable</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXFEIE</name>
|
|
<description>TXFIFO empty interrupt enable</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FIFOEN</name>
|
|
<description>FIFO mode enable</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>M1</name>
|
|
<description>Word length</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOBIE</name>
|
|
<description>End of Block interrupt enable</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTOIE</name>
|
|
<description>Receiver timeout interrupt enable</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEAT4</name>
|
|
<description>Driver Enable assertion time</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEAT3</name>
|
|
<description>DEAT3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEAT2</name>
|
|
<description>DEAT2</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEAT1</name>
|
|
<description>DEAT1</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEAT0</name>
|
|
<description>DEAT0</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEDT4</name>
|
|
<description>Driver Enable de-assertion time</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEDT3</name>
|
|
<description>DEDT3</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEDT2</name>
|
|
<description>DEDT2</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEDT1</name>
|
|
<description>DEDT1</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEDT0</name>
|
|
<description>DEDT0</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVER8</name>
|
|
<description>Oversampling mode</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMIE</name>
|
|
<description>Character match interrupt enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MME</name>
|
|
<description>Mute mode enable</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>M0</name>
|
|
<description>Word length</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WAKE</name>
|
|
<description>Receiver wakeup method</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PCE</name>
|
|
<description>Parity control enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PS</name>
|
|
<description>Parity selection</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PEIE</name>
|
|
<description>PE interrupt enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXEIE</name>
|
|
<description>interrupt enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCIE</name>
|
|
<description>Transmission complete interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXNEIE</name>
|
|
<description>RXNE interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDLEIE</name>
|
|
<description>IDLE interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TE</name>
|
|
<description>Transmitter enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RE</name>
|
|
<description>Receiver enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UESM</name>
|
|
<description>USART enable in Stop mode</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UE</name>
|
|
<description>USART enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>Control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADD4_7</name>
|
|
<description>Address of the USART node</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADD0_3</name>
|
|
<description>Address of the USART node</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTOEN</name>
|
|
<description>Receiver timeout enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABRMOD1</name>
|
|
<description>Auto baud rate mode</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABRMOD0</name>
|
|
<description>ABRMOD0</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABREN</name>
|
|
<description>Auto baud rate enable</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSBFIRST</name>
|
|
<description>Most significant bit first</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAINV</name>
|
|
<description>Binary data inversion</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXINV</name>
|
|
<description>TX pin active level inversion</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXINV</name>
|
|
<description>RX pin active level inversion</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SWAP</name>
|
|
<description>Swap TX/RX pins</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LINEN</name>
|
|
<description>LIN mode enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STOP</name>
|
|
<description>STOP bits</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CLKEN</name>
|
|
<description>Clock enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPOL</name>
|
|
<description>Clock polarity</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPHA</name>
|
|
<description>Clock phase</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LBCL</name>
|
|
<description>Last bit clock pulse</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LBDIE</name>
|
|
<description>LIN break detection interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LBDL</name>
|
|
<description>LIN break detection length</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADDM7</name>
|
|
<description>7-bit Address Detection/4-bit Address Detection</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIS_NSS</name>
|
|
<description>When the DSI_NSS bit is set, the NSS pin input will be ignored</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SLVEN</name>
|
|
<description>Synchronous Slave mode enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR3</name>
|
|
<displayName>CR3</displayName>
|
|
<description>Control register 3</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TXFTCFG</name>
|
|
<description>TXFIFO threshold configuration</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXFTIE</name>
|
|
<description>RXFIFO threshold interrupt enable</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXFTCFG</name>
|
|
<description>Receive FIFO threshold configuration</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCBGTIE</name>
|
|
<description>Tr Complete before guard time, interrupt enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXFTIE</name>
|
|
<description>threshold interrupt enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUFIE</name>
|
|
<description>Wakeup from Stop mode interrupt enable</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUS</name>
|
|
<description>Wakeup from Stop mode interrupt flag selection</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SCARCNT</name>
|
|
<description>Smartcard auto-retry count</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEP</name>
|
|
<description>Driver enable polarity selection</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEM</name>
|
|
<description>Driver enable mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DDRE</name>
|
|
<description>DMA Disable on Reception Error</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OVRDIS</name>
|
|
<description>Overrun Disable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ONEBIT</name>
|
|
<description>One sample bit method enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTSIE</name>
|
|
<description>CTS interrupt enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTSE</name>
|
|
<description>CTS enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTSE</name>
|
|
<description>RTS enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAT</name>
|
|
<description>DMA enable transmitter</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DMAR</name>
|
|
<description>DMA enable receiver</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SCEN</name>
|
|
<description>Smartcard mode enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NACK</name>
|
|
<description>Smartcard NACK enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HDSEL</name>
|
|
<description>Half-duplex selection</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IRLP</name>
|
|
<description>Ir low-power</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IREN</name>
|
|
<description>Ir mode enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EIE</name>
|
|
<description>Error interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BRR</name>
|
|
<displayName>BRR</displayName>
|
|
<description>Baud rate register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BRR</name>
|
|
<description>BRR_4_15</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>GTPR</name>
|
|
<displayName>GTPR</displayName>
|
|
<description>Guard time and prescaler register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>GT</name>
|
|
<description>Guard time value</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PSC</name>
|
|
<description>Prescaler value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RTOR</name>
|
|
<displayName>RTOR</displayName>
|
|
<description>Receiver timeout register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BLEN</name>
|
|
<description>Block Length</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTO</name>
|
|
<description>Receiver timeout value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>24</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RQR</name>
|
|
<displayName>RQR</displayName>
|
|
<description>Request register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TXFRQ</name>
|
|
<description>Transmit data flush request</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXFRQ</name>
|
|
<description>Receive data flush request</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MMRQ</name>
|
|
<description>Mute mode request</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SBKRQ</name>
|
|
<description>Send break request</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABRRQ</name>
|
|
<description>Auto baud rate request</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>Interrupt & status register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00C0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TXFT</name>
|
|
<description>TXFIFO threshold flag</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXFT</name>
|
|
<description>RXFIFO threshold flag</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCBGT</name>
|
|
<description>Transmission complete before guard time flag</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXFF</name>
|
|
<description>RXFIFO Full</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXFE</name>
|
|
<description>TXFIFO Empty</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>REACK</name>
|
|
<description>REACK</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEACK</name>
|
|
<description>TEACK</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUF</name>
|
|
<description>WUF</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RWU</name>
|
|
<description>RWU</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SBKF</name>
|
|
<description>SBKF</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMF</name>
|
|
<description>CMF</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUSY</name>
|
|
<description>BUSY</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABRF</name>
|
|
<description>ABRF</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ABRE</name>
|
|
<description>ABRE</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDR</name>
|
|
<description>SPI slave underrun error flag</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOBF</name>
|
|
<description>EOBF</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTOF</name>
|
|
<description>RTOF</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTS</name>
|
|
<description>CTS</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTSIF</name>
|
|
<description>CTSIF</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LBDF</name>
|
|
<description>LBDF</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXE</name>
|
|
<description>TXE</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TC</name>
|
|
<description>TC</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXNE</name>
|
|
<description>RXNE</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDLE</name>
|
|
<description>IDLE</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ORE</name>
|
|
<description>ORE</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NF</name>
|
|
<description>NF</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FE</name>
|
|
<description>FE</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PE</name>
|
|
<description>PE</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICR</name>
|
|
<displayName>ICR</displayName>
|
|
<description>Interrupt flag clear register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WUCF</name>
|
|
<description>Wakeup from Stop mode clear flag</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CMCF</name>
|
|
<description>Character match clear flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UDRCF</name>
|
|
<description>SPI slave underrun clear flag</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EOBCF</name>
|
|
<description>End of block clear flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTOCF</name>
|
|
<description>Receiver timeout clear flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTSCF</name>
|
|
<description>CTS clear flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LBDCF</name>
|
|
<description>LIN break detection clear flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCBGTCF</name>
|
|
<description>Transmission complete before Guard time clear flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TCCF</name>
|
|
<description>Transmission complete clear flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXFECF</name>
|
|
<description>TXFIFO empty clear flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDLECF</name>
|
|
<description>Idle line detected clear flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ORECF</name>
|
|
<description>Overrun error clear flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NCF</name>
|
|
<description>Noise detected clear flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FECF</name>
|
|
<description>Framing error clear flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PECF</name>
|
|
<description>Parity error clear flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RDR</name>
|
|
<displayName>RDR</displayName>
|
|
<description>Receive data register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RDR</name>
|
|
<description>Receive data value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TDR</name>
|
|
<displayName>TDR</displayName>
|
|
<description>Transmit data register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TDR</name>
|
|
<description>Transmit data value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PRESC</name>
|
|
<displayName>PRESC</displayName>
|
|
<description>Prescaler register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PRESCALER</name>
|
|
<description>Clock prescaler</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral derivedFrom="USART1">
|
|
<name>LPUART1</name>
|
|
<baseAddress>0x40008000</baseAddress>
|
|
<interrupt>
|
|
<name>LPUART1</name>
|
|
<description>LPUART1 global interrupt</description>
|
|
<value>37</value>
|
|
</interrupt>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>SPI1</name>
|
|
<description>Serial peripheral interface/Inter-IC sound</description>
|
|
<groupName>SPI</groupName>
|
|
<baseAddress>0x40013000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>SPI1</name>
|
|
<description>SPI 1 global interrupt</description>
|
|
<value>34</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR1</name>
|
|
<displayName>CR1</displayName>
|
|
<description>control register 1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BIDIMODE</name>
|
|
<description>Bidirectional data mode enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BIDIOE</name>
|
|
<description>Output enable in bidirectional mode</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCEN</name>
|
|
<description>Hardware CRC calculation enable</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CRCNEXT</name>
|
|
<description>CRC transfer next</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DFF</name>
|
|
<description>Data frame format</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXONLY</name>
|
|
<description>Receive only</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSM</name>
|
|
<description>Software slave management</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSI</name>
|
|
<description>Internal slave select</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSBFIRST</name>
|
|
<description>Frame format</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SPE</name>
|
|
<description>SPI enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BR</name>
|
|
<description>Baud rate control</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSTR</name>
|
|
<description>Master selection</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPOL</name>
|
|
<description>Clock polarity</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPHA</name>
|
|
<description>Clock phase</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR2</name>
|
|
<displayName>CR2</displayName>
|
|
<description>control register 2</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000700</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RXDMAEN</name>
|
|
<description>Rx buffer DMA enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXDMAEN</name>
|
|
<description>Tx buffer DMA enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SSOE</name>
|
|
<description>SS output enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NSSP</name>
|
|
<description>NSS pulse management</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FRF</name>
|
|
<description>Frame format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Error interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXNEIE</name>
|
|
<description>RX buffer not empty interrupt enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TXEIE</name>
|
|
<description>Tx buffer empty interrupt enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DS</name>
|
|
<description>Data size</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FRXTH</name>
|
|
<description>FIFO reception threshold</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LDMA_RX</name>
|
|
<description>Last DMA transfer for reception</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LDMA_TX</name>
|
|
<description>Last DMA transfer for transmission</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>status register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000002</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RXNE</name>
|
|
<description>Receive buffer not empty</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>TXE</name>
|
|
<description>Transmit buffer empty</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>CRCERR</name>
|
|
<description>CRC error flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>MODF</name>
|
|
<description>Mode fault</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>OVR</name>
|
|
<description>Overrun flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>BSY</name>
|
|
<description>Busy flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>TIFRFE</name>
|
|
<description>TI frame format error</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>FRLVL</name>
|
|
<description>FIFO reception level</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>FTLVL</name>
|
|
<description>FIFO transmission level</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DR</name>
|
|
<displayName>DR</displayName>
|
|
<description>data register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DR</name>
|
|
<description>Data register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CRCPR</name>
|
|
<displayName>CRCPR</displayName>
|
|
<description>CRC polynomial register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000007</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CRCPOLY</name>
|
|
<description>CRC polynomial register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RXCRCR</name>
|
|
<displayName>RXCRCR</displayName>
|
|
<description>RX CRC register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RxCRC</name>
|
|
<description>Rx CRC register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TXCRCR</name>
|
|
<displayName>TXCRCR</displayName>
|
|
<description>TX CRC register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TxCRC</name>
|
|
<description>Tx CRC register</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral derivedFrom="SPI1">
|
|
<name>SPI2</name>
|
|
<baseAddress>0x40003800</baseAddress>
|
|
<interrupt>
|
|
<name>SPI2</name>
|
|
<description>SPI1 global interrupt</description>
|
|
<value>35</value>
|
|
</interrupt>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>RTC</name>
|
|
<description>Real-time clock</description>
|
|
<groupName>RTC</groupName>
|
|
<baseAddress>0x40002800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>RTC_TAMP</name>
|
|
<description>RTC/TAMP/CSS on LSE through EXTI line 19 interrupt</description>
|
|
<value>2</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>RTC_WKUP</name>
|
|
<description>RTC wakeup interrupt through EXTI[19]</description>
|
|
<value>3</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>RTC_ALARM</name>
|
|
<description>RTC Alarms (A and B) interrupt through
|
|
AIEC</description>
|
|
<value>41</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>TR</name>
|
|
<displayName>TR</displayName>
|
|
<description>time register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PM</name>
|
|
<description>AM/PM notation</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HT</name>
|
|
<description>Hour tens in BCD format</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HU</name>
|
|
<description>Hour units in BCD format</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNT</name>
|
|
<description>Minute tens in BCD format</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNU</name>
|
|
<description>Minute units in BCD format</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ST</name>
|
|
<description>Second tens in BCD format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SU</name>
|
|
<description>Second units in BCD format</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DR</name>
|
|
<displayName>DR</displayName>
|
|
<description>date register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00002101</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>YT</name>
|
|
<description>Year tens in BCD format</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>YU</name>
|
|
<description>Year units in BCD format</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WDU</name>
|
|
<description>Week day units</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MT</name>
|
|
<description>Month tens in BCD format</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MU</name>
|
|
<description>Month units in BCD format</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DT</name>
|
|
<description>Date tens in BCD format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DU</name>
|
|
<description>Date units in BCD format</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WCKSEL</name>
|
|
<description>Wakeup clock selection</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TSEDGE</name>
|
|
<description>Time-stamp event active edge</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>REFCKON</name>
|
|
<description>Reference clock detection enable (50 or 60 Hz)</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BYPSHAD</name>
|
|
<description>Bypass the shadow registers</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FMT</name>
|
|
<description>Hour format</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ALRAE</name>
|
|
<description>Alarm A enable</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ALRBE</name>
|
|
<description>Alarm B enable</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUTE</name>
|
|
<description>Wakeup timer enable</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TSE</name>
|
|
<description>Time stamp enable</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ALRAIE</name>
|
|
<description>Alarm A interrupt enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ALRBIE</name>
|
|
<description>Alarm B interrupt enable</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WUTIE</name>
|
|
<description>Wakeup timer interrupt enable</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TSIE</name>
|
|
<description>Time-stamp interrupt enable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADD1H</name>
|
|
<description>Add 1 hour (summer time change)</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SUB1H</name>
|
|
<description>Subtract 1 hour (winter time change)</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>Backup</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COSEL</name>
|
|
<description>Calibration output selection</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>POL</name>
|
|
<description>Output polarity</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OSEL</name>
|
|
<description>Output selection</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COE</name>
|
|
<description>Calibration output enable</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ITSE</name>
|
|
<description>timestamp on internal event enable</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>initialization and status register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<resetValue>0x00000007</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ALRAWF</name>
|
|
<description>Alarm A write flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ALRBWF</name>
|
|
<description>Alarm B write flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>WUTWF</name>
|
|
<description>Wakeup timer write flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SHPF</name>
|
|
<description>Shift operation pending</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>INITS</name>
|
|
<description>Initialization status flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>RSF</name>
|
|
<description>Registers synchronization flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>INITF</name>
|
|
<description>Initialization flag</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>INIT</name>
|
|
<description>Initialization mode</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>ALRAF</name>
|
|
<description>Alarm A flag</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>ALRBF</name>
|
|
<description>Alarm B flag</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>WUTF</name>
|
|
<description>Wakeup timer flag</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>TSF</name>
|
|
<description>Time-stamp flag</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>TSOVF</name>
|
|
<description>Time-stamp overflow flag</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>TAMP1F</name>
|
|
<description>Tamper detection flag</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>TAMP2F</name>
|
|
<description>RTC_TAMP2 detection flag</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>TAMP3F</name>
|
|
<description>RTC_TAMP3 detection flag</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RECALPF</name>
|
|
<description>Recalibration pending Flag</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>ITSF</name>
|
|
<description>INTERNAL TIME-STAMP FLAG</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PRER</name>
|
|
<displayName>PRER</displayName>
|
|
<description>prescaler register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x007F00FF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PREDIV_A</name>
|
|
<description>Asynchronous prescaler factor</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PREDIV_S</name>
|
|
<description>Synchronous prescaler factor</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>WUTR</name>
|
|
<displayName>WUTR</displayName>
|
|
<description>wakeup timer register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000FFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WUT</name>
|
|
<description>Wakeup auto-reload value bits</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ALRMAR</name>
|
|
<displayName>ALRMAR</displayName>
|
|
<description>alarm A register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MSK4</name>
|
|
<description>Alarm A date mask</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WDSEL</name>
|
|
<description>Week day selection</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DT</name>
|
|
<description>Date tens in BCD format</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DU</name>
|
|
<description>Date units or day in BCD format</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSK3</name>
|
|
<description>Alarm A hours mask</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PM</name>
|
|
<description>AM/PM notation</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HT</name>
|
|
<description>Hour tens in BCD format</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HU</name>
|
|
<description>Hour units in BCD format</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSK2</name>
|
|
<description>Alarm A minutes mask</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNT</name>
|
|
<description>Minute tens in BCD format</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNU</name>
|
|
<description>Minute units in BCD format</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSK1</name>
|
|
<description>Alarm A seconds mask</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ST</name>
|
|
<description>Second tens in BCD format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SU</name>
|
|
<description>Second units in BCD format</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ALRMBR</name>
|
|
<displayName>ALRMBR</displayName>
|
|
<description>alarm B register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MSK4</name>
|
|
<description>Alarm B date mask</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WDSEL</name>
|
|
<description>Week day selection</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DT</name>
|
|
<description>Date tens in BCD format</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DU</name>
|
|
<description>Date units or day in BCD format</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSK3</name>
|
|
<description>Alarm B hours mask</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PM</name>
|
|
<description>AM/PM notation</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HT</name>
|
|
<description>Hour tens in BCD format</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HU</name>
|
|
<description>Hour units in BCD format</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSK2</name>
|
|
<description>Alarm B minutes mask</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNT</name>
|
|
<description>Minute tens in BCD format</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNU</name>
|
|
<description>Minute units in BCD format</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSK1</name>
|
|
<description>Alarm B seconds mask</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ST</name>
|
|
<description>Second tens in BCD format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SU</name>
|
|
<description>Second units in BCD format</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>WPR</name>
|
|
<displayName>WPR</displayName>
|
|
<description>write protection register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>KEY</name>
|
|
<description>Write protection key</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SSR</name>
|
|
<displayName>SSR</displayName>
|
|
<description>sub second register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SS</name>
|
|
<description>Sub second value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SHIFTR</name>
|
|
<displayName>SHIFTR</displayName>
|
|
<description>shift control register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADD1S</name>
|
|
<description>Add one second</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SUBFS</name>
|
|
<description>Subtract a fraction of a second</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TSTR</name>
|
|
<displayName>TSTR</displayName>
|
|
<description>time stamp time register</description>
|
|
<addressOffset>0x30</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SU</name>
|
|
<description>Second units in BCD format</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ST</name>
|
|
<description>Second tens in BCD format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNU</name>
|
|
<description>Minute units in BCD format</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MNT</name>
|
|
<description>Minute tens in BCD format</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HU</name>
|
|
<description>Hour units in BCD format</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HT</name>
|
|
<description>Hour tens in BCD format</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PM</name>
|
|
<description>AM/PM notation</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TSDR</name>
|
|
<displayName>TSDR</displayName>
|
|
<description>time stamp date register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>WDU</name>
|
|
<description>Week day units</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MT</name>
|
|
<description>Month tens in BCD format</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MU</name>
|
|
<description>Month units in BCD format</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DT</name>
|
|
<description>Date tens in BCD format</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DU</name>
|
|
<description>Date units in BCD format</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TSSSR</name>
|
|
<displayName>TSSSR</displayName>
|
|
<description>timestamp sub second register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SS</name>
|
|
<description>Sub second value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CALR</name>
|
|
<displayName>CALR</displayName>
|
|
<description>calibration register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CALP</name>
|
|
<description>Increase frequency of RTC by 488.5 ppm</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CALW8</name>
|
|
<description>Use an 8-second calibration cycle period</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CALW16</name>
|
|
<description>Use a 16-second calibration cycle period</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CALM</name>
|
|
<description>Calibration minus</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>TAMPCR</name>
|
|
<displayName>TAMPCR</displayName>
|
|
<description>tamper configuration register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TAMP1E</name>
|
|
<description>Tamper 1 detection enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP1TRG</name>
|
|
<description>Active level for tamper 1</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMPIE</name>
|
|
<description>Tamper interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP2E</name>
|
|
<description>Tamper 2 detection enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP2TRG</name>
|
|
<description>Active level for tamper 2</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP3E</name>
|
|
<description>Tamper 3 detection enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP3TRG</name>
|
|
<description>Active level for tamper 3</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMPTS</name>
|
|
<description>Activate timestamp on tamper detection event</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMPFREQ</name>
|
|
<description>Tamper sampling frequency</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMPFLT</name>
|
|
<description>Tamper filter count</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMPPRCH</name>
|
|
<description>Tamper precharge duration</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMPPUDIS</name>
|
|
<description>TAMPER pull-up disable</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP1IE</name>
|
|
<description>Tamper 1 interrupt enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP1NOERASE</name>
|
|
<description>Tamper 1 no erase</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP1MF</name>
|
|
<description>Tamper 1 mask flag</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP2IE</name>
|
|
<description>Tamper 2 interrupt enable</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP2NOERASE</name>
|
|
<description>Tamper 2 no erase</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP2MF</name>
|
|
<description>Tamper 2 mask flag</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP3IE</name>
|
|
<description>Tamper 3 interrupt enable</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP3NOERASE</name>
|
|
<description>Tamper 3 no erase</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TAMP3MF</name>
|
|
<description>Tamper 3 mask flag</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ALRMASSR</name>
|
|
<displayName>ALRMASSR</displayName>
|
|
<description>alarm A sub second register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MASKSS</name>
|
|
<description>Mask the most-significant bits starting at this bit</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SS</name>
|
|
<description>Sub seconds value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ALRMBSSR</name>
|
|
<displayName>ALRMBSSR</displayName>
|
|
<description>alarm B sub second register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MASKSS</name>
|
|
<description>Mask the most-significant bits starting at this bit</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SS</name>
|
|
<description>Sub seconds value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>OR</name>
|
|
<displayName>OR</displayName>
|
|
<description>option register</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RTC_ALARM_TYPE</name>
|
|
<description>RTC_ALARM on PC13 output type</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RTC_OUT_RMP</name>
|
|
<description>RTC_OUT remap</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP0R</name>
|
|
<displayName>BKP0R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP1R</name>
|
|
<displayName>BKP1R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP2R</name>
|
|
<displayName>BKP2R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP3R</name>
|
|
<displayName>BKP3R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP4R</name>
|
|
<displayName>BKP4R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x60</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP5R</name>
|
|
<displayName>BKP5R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP6R</name>
|
|
<displayName>BKP6R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x68</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP7R</name>
|
|
<displayName>BKP7R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP8R</name>
|
|
<displayName>BKP8R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x70</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP9R</name>
|
|
<displayName>BKP9R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x74</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP10R</name>
|
|
<displayName>BKP10R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x78</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP11R</name>
|
|
<displayName>BKP11R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x7C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP12R</name>
|
|
<displayName>BKP12R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP13R</name>
|
|
<displayName>BKP13R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP14R</name>
|
|
<displayName>BKP14R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x88</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP15R</name>
|
|
<displayName>BKP15R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x8C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP16R</name>
|
|
<displayName>BKP16R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x90</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP17R</name>
|
|
<displayName>BKP17R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x94</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP18R</name>
|
|
<displayName>BKP18R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x98</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BKP19R</name>
|
|
<displayName>BKP19R</displayName>
|
|
<description>backup register</description>
|
|
<addressOffset>0x9C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BKP</name>
|
|
<description>BKP</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>DBGMCU</name>
|
|
<description>Debug support</description>
|
|
<groupName>DBGMCU</groupName>
|
|
<baseAddress>0xE0042000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>IDCODE</name>
|
|
<displayName>IDCODE</displayName>
|
|
<description>MCU Device ID Code Register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DEV_ID</name>
|
|
<description>Device Identifier</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>REV_ID</name>
|
|
<description>Revision Identifier</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Debug MCU Configuration Register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_SLEEP</name>
|
|
<description>Debug Sleep Mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_STOP</name>
|
|
<description>Debug Stop Mode</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_STANDBY</name>
|
|
<description>Debug Standby Mode</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRACE_IOEN</name>
|
|
<description>Trace port and clock enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRGOEN</name>
|
|
<description>External trigger output enable</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1FZR1</name>
|
|
<displayName>APB1FZR1</displayName>
|
|
<description>APB1 Low Freeze Register CPU1</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_TIMER2_STOP</name>
|
|
<description>Debug Timer 2 stopped when Core is halted</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_RTC_STOP</name>
|
|
<description>RTC counter stopped when core is halted</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_WWDG_STOP</name>
|
|
<description>WWDG counter stopped when core is halted</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_IWDG_STOP</name>
|
|
<description>IWDG counter stopped when core is halted</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_I2C1_STOP</name>
|
|
<description>Debug I2C1 SMBUS timeout stopped when Core is halted</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_I2C3_STOP</name>
|
|
<description>Debug I2C3 SMBUS timeout stopped when core is halted</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_LPTIM1_STOP</name>
|
|
<description>Debug LPTIM1 stopped when Core is halted</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2AP_B1FZR1</name>
|
|
<displayName>C2AP_B1FZR1</displayName>
|
|
<description>APB1 Low Freeze Register CPU2</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_LPTIM2_STOP</name>
|
|
<description>LPTIM2 counter stopped when core is halted</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_RTC_STOP</name>
|
|
<description>RTC counter stopped when core is halted</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_IWDG_STOP</name>
|
|
<description>IWDG stopped when core is halted</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_I2C1_STOP</name>
|
|
<description>I2C1 SMBUS timeout stopped when core is halted</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_I2C3_STOP</name>
|
|
<description>I2C3 SMBUS timeout stopped when core is halted</description>
|
|
<bitOffset>23</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_LPTIM1_STOP</name>
|
|
<description>LPTIM1 counter stopped when core is halted</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB1FZR2</name>
|
|
<displayName>APB1FZR2</displayName>
|
|
<description>APB1 High Freeze Register CPU1</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_LPTIM2_STOP</name>
|
|
<description>LPTIM2 counter stopped when core is halted</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB1FZR2</name>
|
|
<displayName>C2APB1FZR2</displayName>
|
|
<description>APB1 High Freeze Register CPU2</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_LPTIM2_STOP</name>
|
|
<description>LPTIM2 counter stopped when core is halted</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>APB2FZR</name>
|
|
<displayName>APB2FZR</displayName>
|
|
<description>APB2 Freeze Register CPU1</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_TIM1_STOP</name>
|
|
<description>TIM1 counter stopped when core is halted</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_TIM16_STOP</name>
|
|
<description>TIM16 counter stopped when core is halted</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_TIM17_STOP</name>
|
|
<description>TIM17 counter stopped when core is halted</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2APB2FZR</name>
|
|
<displayName>C2APB2FZR</displayName>
|
|
<description>APB2 Freeze Register CPU2</description>
|
|
<alternateRegister>C2APB1FZR2</alternateRegister>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DBG_TIM1_STOP</name>
|
|
<description>TIM1 counter stopped when core is halted</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_TIM16_STOP</name>
|
|
<description>TIM16 counter stopped when core is halted</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DBG_TIM17_STOP</name>
|
|
<description>TIM17 counter stopped when core is halted</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>PKA</name>
|
|
<description>PKA</description>
|
|
<groupName>PKA</groupName>
|
|
<baseAddress>0x58002000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x2000</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>PKA</name>
|
|
<description>Private key accelerator
|
|
interrupt</description>
|
|
<value>29</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>Control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDRERRIE</name>
|
|
<description>Address error interrupt enable</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RAMERRIE</name>
|
|
<description>RAM error interrupt enable</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCENDIE</name>
|
|
<description>End of operation interrupt enable</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MODE</name>
|
|
<description>PKA Operation Mode</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SECLVL</name>
|
|
<description>Security Enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>START</name>
|
|
<description>Start the operation</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EN</name>
|
|
<description>Peripheral Enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SR</name>
|
|
<displayName>SR</displayName>
|
|
<description>PKA status register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDRERRF</name>
|
|
<description>Address error flag</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RAMERRF</name>
|
|
<description>RAM error flag</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCENDF</name>
|
|
<description>PKA End of Operation flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUSY</name>
|
|
<description>PKA Operation in progress</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CLRFR</name>
|
|
<displayName>CLRFR</displayName>
|
|
<description>PKA clear flag register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDRERRFC</name>
|
|
<description>Clear Address error flag</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RAMERRFC</name>
|
|
<description>Clear RAM error flag</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PROCENDFC</name>
|
|
<description>Clear PKA End of Operation flag</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VERR</name>
|
|
<displayName>VERR</displayName>
|
|
<description>PKA version register</description>
|
|
<addressOffset>0x1FF4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000010</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MINREV</name>
|
|
<description>Minor revision</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MAJREV</name>
|
|
<description>Major revision</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPIDR</name>
|
|
<displayName>IPIDR</displayName>
|
|
<description>PKA identification register</description>
|
|
<addressOffset>0x1FF8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00170061</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ID</name>
|
|
<description>Identification Code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SIDR</name>
|
|
<displayName>SIDR</displayName>
|
|
<description>PKA size ID register</description>
|
|
<addressOffset>0x1FFC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0xA3C5DD08</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SID</name>
|
|
<description>Side Identification Code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>IPCC</name>
|
|
<description>IPCC</description>
|
|
<groupName>IPCC</groupName>
|
|
<baseAddress>0x58000C00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>IPCC_C1_RX_IT</name>
|
|
<description>IPCC CPU1 RX occupied interrupt</description>
|
|
<value>44</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>IPCC_C1_TX_IT</name>
|
|
<description>IPCC CPU1 TX free interrupt</description>
|
|
<value>45</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>C1CR</name>
|
|
<displayName>C1CR</displayName>
|
|
<description>Control register CPU1</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TXFIE</name>
|
|
<description>processor 1 Transmit channel free interrupt enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXOIE</name>
|
|
<description>processor 1 Receive channel occupied interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1MR</name>
|
|
<displayName>C1MR</displayName>
|
|
<description>Mask register CPU1</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CH6FM</name>
|
|
<description>processor 1 Transmit channel 6 free interrupt mask</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5FM</name>
|
|
<description>processor 1 Transmit channel 5 free interrupt mask</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4FM</name>
|
|
<description>processor 1 Transmit channel 4 free interrupt mask</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3FM</name>
|
|
<description>processor 1 Transmit channel 3 free interrupt mask</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2FM</name>
|
|
<description>processor 1 Transmit channel 2 free interrupt mask</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1FM</name>
|
|
<description>processor 1 Transmit channel 1 free interrupt mask</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH6OM</name>
|
|
<description>processor 1 Receive channel 6 occupied interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5OM</name>
|
|
<description>processor 1 Receive channel 5 occupied interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4OM</name>
|
|
<description>processor 1 Receive channel 4 occupied interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3OM</name>
|
|
<description>processor 1 Receive channel 3 occupied interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2OM</name>
|
|
<description>processor 1 Receive channel 2 occupied interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1OM</name>
|
|
<description>processor 1 Receive channel 1 occupied interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1SCR</name>
|
|
<displayName>C1SCR</displayName>
|
|
<description>Status Set or Clear register CPU1</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CH6S</name>
|
|
<description>processor 1 Transmit channel 6 status set</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5S</name>
|
|
<description>processor 1 Transmit channel 5 status set</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4S</name>
|
|
<description>processor 1 Transmit channel 4 status set</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3S</name>
|
|
<description>processor 1 Transmit channel 3 status set</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2S</name>
|
|
<description>processor 1 Transmit channel 2 status set</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1S</name>
|
|
<description>processor 1 Transmit channel 1 status set</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH6C</name>
|
|
<description>processor 1 Receive channel 6 status clear</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5C</name>
|
|
<description>processor 1 Receive channel 5 status clear</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4C</name>
|
|
<description>processor 1 Receive channel 4 status clear</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3C</name>
|
|
<description>processor 1 Receive channel 3 status clear</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2C</name>
|
|
<description>processor 1 Receive channel 2 status clear</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1C</name>
|
|
<description>processor 1 Receive channel 1 status clear</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1TO2SR</name>
|
|
<displayName>C1TO2SR</displayName>
|
|
<description>CPU1 to CPU2 status register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CH6F</name>
|
|
<description>processor 1 transmit to process 2 Receive channel 6 status flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5F</name>
|
|
<description>processor 1 transmit to process 2 Receive channel 5 status flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4F</name>
|
|
<description>processor 1 transmit to process 2 Receive channel 4 status flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3F</name>
|
|
<description>processor 1 transmit to process 2 Receive channel 3 status flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2F</name>
|
|
<description>processor 1 transmit to process 2 Receive channel 2 status flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1F</name>
|
|
<description>processor 1 transmit to process 2 Receive channel 1 status flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2CR</name>
|
|
<displayName>C2CR</displayName>
|
|
<description>Control register CPU2</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TXFIE</name>
|
|
<description>processor 2 Transmit channel free interrupt enable</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXOIE</name>
|
|
<description>processor 2 Receive channel occupied interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2MR</name>
|
|
<displayName>C2MR</displayName>
|
|
<description>Mask register CPU2</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0xFFFFFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CH6FM</name>
|
|
<description>processor 2 Transmit channel 6 free interrupt mask</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5FM</name>
|
|
<description>processor 2 Transmit channel 5 free interrupt mask</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4FM</name>
|
|
<description>processor 2 Transmit channel 4 free interrupt mask</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3FM</name>
|
|
<description>processor 2 Transmit channel 3 free interrupt mask</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2FM</name>
|
|
<description>processor 2 Transmit channel 2 free interrupt mask</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1FM</name>
|
|
<description>processor 2 Transmit channel 1 free interrupt mask</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH6OM</name>
|
|
<description>processor 2 Receive channel 6 occupied interrupt enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5OM</name>
|
|
<description>processor 2 Receive channel 5 occupied interrupt enable</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4OM</name>
|
|
<description>processor 2 Receive channel 4 occupied interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3OM</name>
|
|
<description>processor 2 Receive channel 3 occupied interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2OM</name>
|
|
<description>processor 2 Receive channel 2 occupied interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1OM</name>
|
|
<description>processor 2 Receive channel 1 occupied interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2SCR</name>
|
|
<displayName>C2SCR</displayName>
|
|
<description>Status Set or Clear register CPU2</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>write-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CH6S</name>
|
|
<description>processor 2 Transmit channel 6 status set</description>
|
|
<bitOffset>21</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5S</name>
|
|
<description>processor 2 Transmit channel 5 status set</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4S</name>
|
|
<description>processor 2 Transmit channel 4 status set</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3S</name>
|
|
<description>processor 2 Transmit channel 3 status set</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2S</name>
|
|
<description>processor 2 Transmit channel 2 status set</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1S</name>
|
|
<description>processor 2 Transmit channel 1 status set</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH6C</name>
|
|
<description>processor 2 Receive channel 6 status clear</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5C</name>
|
|
<description>processor 2 Receive channel 5 status clear</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4C</name>
|
|
<description>processor 2 Receive channel 4 status clear</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3C</name>
|
|
<description>processor 2 Receive channel 3 status clear</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2C</name>
|
|
<description>processor 2 Receive channel 2 status clear</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1C</name>
|
|
<description>processor 2 Receive channel 1 status clear</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2TOC1SR</name>
|
|
<displayName>C2TOC1SR</displayName>
|
|
<description>CPU2 to CPU1 status register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CH6F</name>
|
|
<description>processor 2 transmit to process 1 Receive channel 6 status flag</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH5F</name>
|
|
<description>processor 2 transmit to process 1 Receive channel 5 status flag</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH4F</name>
|
|
<description>processor 2 transmit to process 1 Receive channel 4 status flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH3F</name>
|
|
<description>processor 2 transmit to process 1 Receive channel 3 status flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH2F</name>
|
|
<description>processor 2 transmit to process 1 Receive channel 2 status flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CH1F</name>
|
|
<description>processor 2 transmit to process 1 Receive channel 1 status flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR</name>
|
|
<displayName>HWCFGR</displayName>
|
|
<description>IPCC Hardware configuration register</description>
|
|
<addressOffset>0x3F0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000006</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CHANNELS</name>
|
|
<description>Number of channels per CPU supported by the IP, range 1 to 16</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VERR</name>
|
|
<displayName>VERR</displayName>
|
|
<description>IPCC version register</description>
|
|
<addressOffset>0x3F4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000010</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MAJREV</name>
|
|
<description>Major Revision</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MINREV</name>
|
|
<description>Minor Revision</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPIDR</name>
|
|
<displayName>IPIDR</displayName>
|
|
<description>IPCC indentification register</description>
|
|
<addressOffset>0x3F8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00100071</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPID</name>
|
|
<description>Identification Code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SIDR</name>
|
|
<displayName>SIDR</displayName>
|
|
<description>IPCC size indentification register</description>
|
|
<addressOffset>0x3FC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0xA3C5DD01</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SID</name>
|
|
<description>Size Identification Code</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>EXTI</name>
|
|
<description>External interrupt/event controller</description>
|
|
<groupName>EXTI</groupName>
|
|
<baseAddress>0x58000800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>PVD</name>
|
|
<description>PVD through EXTI[16] (C1IMR2[20])</description>
|
|
<value>1</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI0</name>
|
|
<description>EXTI line 0 interrupt through
|
|
EXTI[0]</description>
|
|
<value>6</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI1</name>
|
|
<description>EXTI line 0 interrupt through
|
|
EXTI[1]</description>
|
|
<value>7</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI2</name>
|
|
<description>EXTI line 0 interrupt through
|
|
EXTI[2]</description>
|
|
<value>8</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI3</name>
|
|
<description>EXTI line 0 interrupt through
|
|
EXTI[3]</description>
|
|
<value>9</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI4</name>
|
|
<description>EXTI line 0 interrupt through
|
|
EXTI[4]</description>
|
|
<value>10</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>C2SEV</name>
|
|
<description>CPU2 SEV through EXTI[40]</description>
|
|
<value>21</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI5_9</name>
|
|
<description>EXTI line [9:5] interrupt through
|
|
EXTI[9:5]</description>
|
|
<value>23</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>EXTI10_15</name>
|
|
<description>EXTI line [15:10] interrupt through
|
|
EXTI[15:10]</description>
|
|
<value>40</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>RTSR1</name>
|
|
<displayName>RTSR1</displayName>
|
|
<description>rising trigger selection register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RT</name>
|
|
<description>Rising trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>22</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RT_31</name>
|
|
<description>Rising trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FTSR1</name>
|
|
<displayName>FTSR1</displayName>
|
|
<description>falling trigger selection register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FT</name>
|
|
<description>Falling trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>22</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FT_31</name>
|
|
<description>Falling trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SWIER1</name>
|
|
<displayName>SWIER1</displayName>
|
|
<description>software interrupt event register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SWI</name>
|
|
<description>Software interrupt on event</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>22</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SWI_31</name>
|
|
<description>Software interrupt on event</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PR1</name>
|
|
<displayName>PR1</displayName>
|
|
<description>EXTI pending register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PIF</name>
|
|
<description>Configurable event inputs Pending bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>22</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PIF_31</name>
|
|
<description>Configurable event inputs Pending bit</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>RTSR2</name>
|
|
<displayName>RTSR2</displayName>
|
|
<description>rising trigger selection register</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RT33</name>
|
|
<description>Rising trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RT40_41</name>
|
|
<description>Rising trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FTSR2</name>
|
|
<displayName>FTSR2</displayName>
|
|
<description>falling trigger selection register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FT33</name>
|
|
<description>Falling trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FT40_41</name>
|
|
<description>Falling trigger event configuration bit of Configurable Event input</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SWIER2</name>
|
|
<displayName>SWIER2</displayName>
|
|
<description>software interrupt event register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SWI33</name>
|
|
<description>Software interrupt on event</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SWI40_41</name>
|
|
<description>Software interrupt on event</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>PR2</name>
|
|
<displayName>PR2</displayName>
|
|
<description>pending register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PIF33</name>
|
|
<description>Configurable event inputs x+32 Pending bit.</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PIF40_41</name>
|
|
<description>Configurable event inputs x+32 Pending bit.</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1IMR1</name>
|
|
<displayName>C1IMR1</displayName>
|
|
<description>CPUm wakeup with interrupt mask register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x7FC00000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IM</name>
|
|
<description>CPU(m) wakeup with interrupt Mask on Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2IMR1</name>
|
|
<displayName>C2IMR1</displayName>
|
|
<description>CPUm wakeup with interrupt mask register</description>
|
|
<addressOffset>0xC0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x7FC00000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IM</name>
|
|
<description>CPU(m) wakeup with interrupt Mask on Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1EMR1</name>
|
|
<displayName>C1EMR1</displayName>
|
|
<description>CPUm wakeup with event mask register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EM0_15</name>
|
|
<description>CPU(m) Wakeup with event generation Mask on Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EM17_21</name>
|
|
<description>CPU(m) Wakeup with event generation Mask on Event input</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2EMR1</name>
|
|
<displayName>C2EMR1</displayName>
|
|
<description>CPUm wakeup with event mask register</description>
|
|
<addressOffset>0xC4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EM0_15</name>
|
|
<description>CPU(m) Wakeup with event generation Mask on Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EM17_21</name>
|
|
<description>CPU(m) Wakeup with event generation Mask on Event input</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1IMR2</name>
|
|
<displayName>C1IMR2</displayName>
|
|
<description>CPUm wakeup with interrupt mask register</description>
|
|
<addressOffset>0x90</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0001FCFD</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IM</name>
|
|
<description>CPUm Wakeup with interrupt Mask on Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>17</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2IMR2</name>
|
|
<displayName>C2IMR2</displayName>
|
|
<description>CPUm wakeup with interrupt mask register</description>
|
|
<addressOffset>0xD0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0001FCFD</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IM</name>
|
|
<description>CPUm Wakeup with interrupt Mask on Event input</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>17</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C1EMR2</name>
|
|
<displayName>C1EMR2</displayName>
|
|
<description>CPUm wakeup with event mask register</description>
|
|
<addressOffset>0x94</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EM</name>
|
|
<description>CPU(m) Wakeup with event generation Mask on Event input</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>C2EMR2</name>
|
|
<displayName>C2EMR2</displayName>
|
|
<description>CPUm wakeup with event mask register</description>
|
|
<addressOffset>0xD4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EM</name>
|
|
<description>CPU(m) Wakeup with event generation Mask on Event input</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR5</name>
|
|
<displayName>HWCFGR5</displayName>
|
|
<description>Hardware configuration registers</description>
|
|
<addressOffset>0x3E0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x003EFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CPUEVENT</name>
|
|
<description>HW configuration CPU event generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR6</name>
|
|
<displayName>HWCFGR6</displayName>
|
|
<description>Hardware configuration registers</description>
|
|
<addressOffset>0x3DC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000300</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CPUEVENT</name>
|
|
<description>HW configuration CPU event generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR7</name>
|
|
<displayName>HWCFGR7</displayName>
|
|
<description>EXTI Hardware configuration registers</description>
|
|
<addressOffset>0x3D8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CPUEVENT</name>
|
|
<description>HW configuration CPU event generation</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR2</name>
|
|
<displayName>HWCFGR2</displayName>
|
|
<description>Hardware configuration registers</description>
|
|
<addressOffset>0x3EC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x803FFFFF</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EVENT_TRG</name>
|
|
<description>HW configuration event trigger type</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR3</name>
|
|
<displayName>HWCFGR3</displayName>
|
|
<description>Hardware configuration registers</description>
|
|
<addressOffset>0x3E8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000302</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EVENT_TRG</name>
|
|
<description>HW configuration event trigger type</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR4</name>
|
|
<displayName>HWCFGR4</displayName>
|
|
<description>Hardware configuration registers</description>
|
|
<addressOffset>0x3E4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EVENT_TRG</name>
|
|
<description>HW configuration event trigger type</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HWCFGR1</name>
|
|
<displayName>HWCFGR1</displayName>
|
|
<description>Hardware configuration register 1</description>
|
|
<addressOffset>0x3F0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00003130</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NBEVENTS</name>
|
|
<description>HW configuration number of event</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NBCPUS</name>
|
|
<description>HW configuration number of CPUs</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CPUEVTEN</name>
|
|
<description>HW configuration of CPU(m) event output enable</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VERR</name>
|
|
<displayName>VERR</displayName>
|
|
<description>EXTI IP Version register</description>
|
|
<addressOffset>0x3F4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0X00000020</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MINREV</name>
|
|
<description>Minor Revision number</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MAJREV</name>
|
|
<description>Major Revision number</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPIDR</name>
|
|
<displayName>IPIDR</displayName>
|
|
<description>Identification register</description>
|
|
<addressOffset>0x3F8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x000E0001</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPID</name>
|
|
<description>IP Identification</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SIDR</name>
|
|
<displayName>SIDR</displayName>
|
|
<description>Size ID register</description>
|
|
<addressOffset>0x3FC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0xA3C5DD01</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SID</name>
|
|
<description>Size Identification</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>CRS</name>
|
|
<description>Clock recovery system</description>
|
|
<groupName>CRS</groupName>
|
|
<baseAddress>0x40006000</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x400</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>CRS_IT</name>
|
|
<description>CRS interrupt</description>
|
|
<value>42</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>CR</name>
|
|
<displayName>CR</displayName>
|
|
<description>CRS control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00002000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNCOKIE</name>
|
|
<description>SYNC event OK interrupt enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCWARNIE</name>
|
|
<description>SYNC warning interrupt enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRIE</name>
|
|
<description>Synchronization or trimming error interrupt enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ESYNCIE</name>
|
|
<description>Expected SYNC interrupt enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CEN</name>
|
|
<description>Frequency error counter enable</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AUTOTRIMEN</name>
|
|
<description>Automatic trimming enable</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SWSYNC</name>
|
|
<description>Automatic trimming enable</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRIM</name>
|
|
<description>HSI48 oscillator smooth trimming</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>6</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFGR</name>
|
|
<displayName>CFGR</displayName>
|
|
<description>CRS configuration register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x2022BB7F</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RELOAD</name>
|
|
<description>Counter reload value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FELIM</name>
|
|
<description>Frequency error limit</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCDIV</name>
|
|
<description>SYNCDIV</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCSRC</name>
|
|
<description>SYNC signal source selection</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCPOL</name>
|
|
<description>SYNC polarity selection</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISR</name>
|
|
<displayName>ISR</displayName>
|
|
<description>CRS interrupt and status register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNCOKF</name>
|
|
<description>SYNC event OK flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCWARNF</name>
|
|
<description>SYNC warning flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRF</name>
|
|
<description>Error flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ESYNCF</name>
|
|
<description>Expected SYNC flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCERR</name>
|
|
<description>SYNC error</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCMISS</name>
|
|
<description>SYNC missed</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TRIMOVF</name>
|
|
<description>Trimming overflow or underflow</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FEDIR</name>
|
|
<description>Frequency error direction</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FECAP</name>
|
|
<description>Frequency error capture</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICR</name>
|
|
<displayName>ICR</displayName>
|
|
<description>CRS interrupt flag clear register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SYNCOKC</name>
|
|
<description>SYNC event OK clear flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYNCWARNC</name>
|
|
<description>warning clear flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRC</name>
|
|
<description>Error clear flag</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ESYNCC</name>
|
|
<description>Expected SYNC clear flag</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>USB</name>
|
|
<description>Universal serial bus full-speed device interface</description>
|
|
<groupName>USB</groupName>
|
|
<baseAddress>0x40006800</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x800</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>USB_HP</name>
|
|
<description>USB high priority interrupt</description>
|
|
<value>19</value>
|
|
</interrupt>
|
|
<interrupt>
|
|
<name>USB_LP</name>
|
|
<description>USB low priority interrupt (including USB
|
|
wakeup)</description>
|
|
<value>20</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>EP0R</name>
|
|
<displayName>EP0R</displayName>
|
|
<description>endpoint 0 register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP1R</name>
|
|
<displayName>EP1R</displayName>
|
|
<description>endpoint 1 register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP2R</name>
|
|
<displayName>EP2R</displayName>
|
|
<description>endpoint 2 register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP3R</name>
|
|
<displayName>EP3R</displayName>
|
|
<description>endpoint 3 register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP4R</name>
|
|
<displayName>EP4R</displayName>
|
|
<description>endpoint 4 register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP5R</name>
|
|
<displayName>EP5R</displayName>
|
|
<description>endpoint 5 register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP6R</name>
|
|
<displayName>EP6R</displayName>
|
|
<description>endpoint 6 register</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>EP7R</name>
|
|
<displayName>EP7R</displayName>
|
|
<description>endpoint 7 register</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EA</name>
|
|
<description>Endpoint address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_TX</name>
|
|
<description>Status bits, for transmission transfers</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_TX</name>
|
|
<description>Data Toggle, for transmission transfers</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_TX</name>
|
|
<description>Correct Transfer for transmission</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_KIND</name>
|
|
<description>Endpoint kind</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EP_TYPE</name>
|
|
<description>Endpoint type</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SETUP</name>
|
|
<description>Setup transaction completed</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STAT_RX</name>
|
|
<description>Status bits, for reception transfers</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DTOG_RX</name>
|
|
<description>Data Toggle, for reception transfers</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTR_RX</name>
|
|
<description>Correct transfer for reception</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CNTR</name>
|
|
<displayName>CNTR</displayName>
|
|
<description>control register</description>
|
|
<addressOffset>0x40</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000003</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FRES</name>
|
|
<description>Force USB Reset</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PDWN</name>
|
|
<description>Power down</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LPMODE</name>
|
|
<description>Low-power mode</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FSUSP</name>
|
|
<description>Force suspend</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RESUME</name>
|
|
<description>Resume request</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>L1RESUME</name>
|
|
<description>LPM L1 Resume request</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>L1REQM</name>
|
|
<description>LPM L1 state request interrupt mask</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ESOFM</name>
|
|
<description>Expected start of frame interrupt mask</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SOFM</name>
|
|
<description>Start of frame interrupt mask</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RESETM</name>
|
|
<description>USB reset interrupt mask</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SUSPM</name>
|
|
<description>Suspend mode interrupt mask</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>WKUPM</name>
|
|
<description>Wakeup interrupt mask</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ERRM</name>
|
|
<description>Error interrupt mask</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PMAOVRM</name>
|
|
<description>Packet memory area over / underrun interrupt mask</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CTRM</name>
|
|
<description>Correct transfer interrupt mask</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISTR</name>
|
|
<displayName>ISTR</displayName>
|
|
<description>interrupt status register</description>
|
|
<addressOffset>0x44</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>EP_ID</name>
|
|
<description>Endpoint Identifier</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>DIR</name>
|
|
<description>Direction of transaction</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>L1REQ</name>
|
|
<description>LPM L1 state request</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>ESOF</name>
|
|
<description>Expected start frame</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SOF</name>
|
|
<description>start of frame</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>RESET</name>
|
|
<description>reset request</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SUSP</name>
|
|
<description>Suspend mode request</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>WKUP</name>
|
|
<description>Wakeup</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>ERR</name>
|
|
<description>Error</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PMAOVR</name>
|
|
<description>Packet memory area over / underrun</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>CTR</name>
|
|
<description>Correct transfer</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FNR</name>
|
|
<displayName>FNR</displayName>
|
|
<description>frame number register</description>
|
|
<addressOffset>0x48</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>FN</name>
|
|
<description>Frame number</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>11</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSOF</name>
|
|
<description>Lost SOF</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LCK</name>
|
|
<description>Locked</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXDM</name>
|
|
<description>Receive data - line status</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RXDP</name>
|
|
<description>Receive data + line status</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>DADDR</name>
|
|
<displayName>DADDR</displayName>
|
|
<description>device address</description>
|
|
<addressOffset>0x4C</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADD</name>
|
|
<description>Device address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>EF</name>
|
|
<description>Enable function</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BTABLE</name>
|
|
<displayName>BTABLE</displayName>
|
|
<description>Buffer table address</description>
|
|
<addressOffset>0x50</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BTABLE</name>
|
|
<description>Buffer table</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>13</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT0_TX</name>
|
|
<displayName>COUNT0_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x52</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT0_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT1_TX</name>
|
|
<displayName>COUNT1_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x5A</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT1_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT2_TX</name>
|
|
<displayName>COUNT2_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x62</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT2_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT3_TX</name>
|
|
<displayName>COUNT3_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x6A</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT3_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT4_TX</name>
|
|
<displayName>COUNT4_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x72</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT4_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT5_TX</name>
|
|
<displayName>COUNT5_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x7A</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT5_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT6_TX</name>
|
|
<displayName>COUNT6_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x82</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT6_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT7_TX</name>
|
|
<displayName>COUNT7_TX</displayName>
|
|
<description>Transmission byte count 0</description>
|
|
<addressOffset>0x8A</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT7_TX</name>
|
|
<description>Transmission byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR0_RX</name>
|
|
<displayName>ADDR0_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR0_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR1_RX</name>
|
|
<displayName>ADDR1_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x5C</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR1_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR2_RX</name>
|
|
<displayName>ADDR2_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x64</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR2_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR3_RX</name>
|
|
<displayName>ADDR3_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x6C</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR3_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR4_RX</name>
|
|
<displayName>ADDR4_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x74</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR4_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR5_RX</name>
|
|
<displayName>ADDR5_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x7C</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR5_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR6_RX</name>
|
|
<displayName>ADDR6_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR6_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ADDR7_RX</name>
|
|
<displayName>ADDR7_RX</displayName>
|
|
<description>Reception buffer address 0</description>
|
|
<addressOffset>0x8C</addressOffset>
|
|
<size>0x10</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDR7_RX</name>
|
|
<description>Reception buffer address</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>15</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT0_RX</name>
|
|
<displayName>COUNT0_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x56</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT0_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT1_RX</name>
|
|
<displayName>COUNT1_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x5E</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT1_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT2_RX</name>
|
|
<displayName>COUNT2_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x66</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT2_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT3_RX</name>
|
|
<displayName>COUNT3_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x6E</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT3_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT4_RX</name>
|
|
<displayName>COUNT4_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x76</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT4_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT5_RX</name>
|
|
<displayName>COUNT5_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x7E</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT5_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT6_RX</name>
|
|
<displayName>COUNT6_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x86</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT6_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>COUNT7_RX</name>
|
|
<displayName>COUNT7_RX</displayName>
|
|
<description>Reception byte count 0</description>
|
|
<addressOffset>0x8E</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>COUNT7_RX</name>
|
|
<description>Reception byte count</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>10</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>NUM_BLOCK</name>
|
|
<description>Number of blocks</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BL_SIZE</name>
|
|
<description>Block size</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LPMCSR</name>
|
|
<displayName>LPMCSR</displayName>
|
|
<description>control and status register</description>
|
|
<alternateRegister>ADDR0_RX</alternateRegister>
|
|
<addressOffset>0x54</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LPMEN</name>
|
|
<description>LPM support enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>LPMACK</name>
|
|
<description>LPM Token acknowledge enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>REMWAKE</name>
|
|
<description>RemoteWake value</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>BESL</name>
|
|
<description>BESL value</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BCDR</name>
|
|
<displayName>BCDR</displayName>
|
|
<description>Battery charging detector(</description>
|
|
<addressOffset>0x58</addressOffset>
|
|
<size>0x10</size>
|
|
<resetValue>0x0000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BCDEN</name>
|
|
<description>Battery charging detector (BCD) enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>DCDEN</name>
|
|
<description>Data contact detection (DCD) mode enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>PDEN</name>
|
|
<description>Primary detection (PD) mode enable</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>SDEN</name>
|
|
<description>Secondary detection (SD) mode enable</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
<field>
|
|
<name>DCDET</name>
|
|
<description>Data contact detection (DCD) status</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PDET</name>
|
|
<description>Primary detection (PD) status</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>SDET</name>
|
|
<description>Secondary detection (SD) status</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>PS2DET</name>
|
|
<description>DM pull-up detection status</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-only</access>
|
|
</field>
|
|
<field>
|
|
<name>DPPU</name>
|
|
<description>DP pull-up control</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
<access>read-write</access>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>SCB</name>
|
|
<description>System control block</description>
|
|
<groupName>SCB</groupName>
|
|
<baseAddress>0xE000ED00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x41</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>CPUID</name>
|
|
<displayName>CPUID</displayName>
|
|
<description>CPUID base register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x410FC241</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>Revision</name>
|
|
<description>Revision number</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PartNo</name>
|
|
<description>Part number of the processor</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>12</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>Constant</name>
|
|
<description>Reads as 0xF</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>Variant</name>
|
|
<description>Variant number</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>Implementer</name>
|
|
<description>Implementer code</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICSR</name>
|
|
<displayName>ICSR</displayName>
|
|
<description>Interrupt control and state register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>VECTACTIVE</name>
|
|
<description>Active vector</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RETTOBASE</name>
|
|
<description>Return to base level</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VECTPENDING</name>
|
|
<description>Pending vector</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>7</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ISRPENDING</name>
|
|
<description>Interrupt pending flag</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PENDSTCLR</name>
|
|
<description>SysTick exception clear-pending bit</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PENDSTSET</name>
|
|
<description>SysTick exception set-pending bit</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PENDSVCLR</name>
|
|
<description>PendSV clear-pending bit</description>
|
|
<bitOffset>27</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PENDSVSET</name>
|
|
<description>PendSV set-pending bit</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NMIPENDSET</name>
|
|
<description>NMI set-pending bit.</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VTOR</name>
|
|
<displayName>VTOR</displayName>
|
|
<description>Vector table offset register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TBLOFF</name>
|
|
<description>Vector table base offset field</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>21</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AIRCR</name>
|
|
<displayName>AIRCR</displayName>
|
|
<description>Application interrupt and reset control register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>VECTRESET</name>
|
|
<description>VECTRESET</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VECTCLRACTIVE</name>
|
|
<description>VECTCLRACTIVE</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYSRESETREQ</name>
|
|
<description>SYSRESETREQ</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRIGROUP</name>
|
|
<description>PRIGROUP</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ENDIANESS</name>
|
|
<description>ENDIANESS</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VECTKEYSTAT</name>
|
|
<description>Register key</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>16</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SCR</name>
|
|
<displayName>SCR</displayName>
|
|
<description>System control register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SLEEPONEXIT</name>
|
|
<description>SLEEPONEXIT</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SLEEPDEEP</name>
|
|
<description>SLEEPDEEP</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SEVEONPEND</name>
|
|
<description>Send Event on Pending bit</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CCR</name>
|
|
<displayName>CCR</displayName>
|
|
<description>Configuration and control register</description>
|
|
<addressOffset>0x14</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>NONBASETHRDENA</name>
|
|
<description>Configures how the processor enters Thread mode</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USERSETMPEND</name>
|
|
<description>USERSETMPEND</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UNALIGN__TRP</name>
|
|
<description>UNALIGN_ TRP</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIV_0_TRP</name>
|
|
<description>DIV_0_TRP</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BFHFNMIGN</name>
|
|
<description>BFHFNMIGN</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STKALIGN</name>
|
|
<description>STKALIGN</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SHPR1</name>
|
|
<displayName>SHPR1</displayName>
|
|
<description>System handler priority registers</description>
|
|
<addressOffset>0x18</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PRI_4</name>
|
|
<description>Priority of system handler 4</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRI_5</name>
|
|
<description>Priority of system handler 5</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRI_6</name>
|
|
<description>Priority of system handler 6</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SHPR2</name>
|
|
<displayName>SHPR2</displayName>
|
|
<description>System handler priority registers</description>
|
|
<addressOffset>0x1C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PRI_11</name>
|
|
<description>Priority of system handler 11</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SHPR3</name>
|
|
<displayName>SHPR3</displayName>
|
|
<description>System handler priority registers</description>
|
|
<addressOffset>0x20</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>PRI_14</name>
|
|
<description>Priority of system handler 14</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRI_15</name>
|
|
<description>Priority of system handler 15</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>SHCSR</name>
|
|
<displayName>SHCSR</displayName>
|
|
<description>System handler control and state register</description>
|
|
<addressOffset>0x24</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MEMFAULTACT</name>
|
|
<description>Memory management fault exception active bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUSFAULTACT</name>
|
|
<description>Bus fault exception active bit</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USGFAULTACT</name>
|
|
<description>Usage fault exception active bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SVCALLACT</name>
|
|
<description>SVC call active bit</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MONITORACT</name>
|
|
<description>Debug monitor active bit</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PENDSVACT</name>
|
|
<description>PendSV exception active bit</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SYSTICKACT</name>
|
|
<description>SysTick exception active bit</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USGFAULTPENDED</name>
|
|
<description>Usage fault exception pending bit</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MEMFAULTPENDED</name>
|
|
<description>Memory management fault exception pending bit</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUSFAULTPENDED</name>
|
|
<description>Bus fault exception pending bit</description>
|
|
<bitOffset>14</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SVCALLPENDED</name>
|
|
<description>SVC call pending bit</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MEMFAULTENA</name>
|
|
<description>Memory management fault enable bit</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BUSFAULTENA</name>
|
|
<description>Bus fault enable bit</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USGFAULTENA</name>
|
|
<description>Usage fault enable bit</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CFSR_UFSR_BFSR_MMFSR</name>
|
|
<displayName>CFSR_UFSR_BFSR_MMFSR</displayName>
|
|
<description>Configurable fault status register</description>
|
|
<addressOffset>0x28</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IACCVIOL</name>
|
|
<description>Instruction access violation flag</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MUNSTKERR</name>
|
|
<description>Memory manager fault on unstacking for a return from exception</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MSTKERR</name>
|
|
<description>Memory manager fault on stacking for exception entry.</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MLSPERR</name>
|
|
<description>MLSPERR</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MMARVALID</name>
|
|
<description>Memory Management Fault Address Register (MMAR) valid flag</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IBUSERR</name>
|
|
<description>Instruction bus error</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRECISERR</name>
|
|
<description>Precise data bus error</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IMPRECISERR</name>
|
|
<description>Imprecise data bus error</description>
|
|
<bitOffset>10</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UNSTKERR</name>
|
|
<description>Bus fault on unstacking for a return from exception</description>
|
|
<bitOffset>11</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>STKERR</name>
|
|
<description>Bus fault on stacking for exception entry</description>
|
|
<bitOffset>12</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSPERR</name>
|
|
<description>Bus fault on floating-point lazy state preservation</description>
|
|
<bitOffset>13</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BFARVALID</name>
|
|
<description>Bus Fault Address Register (BFAR) valid flag</description>
|
|
<bitOffset>15</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UNDEFINSTR</name>
|
|
<description>Undefined instruction usage fault</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>INVSTATE</name>
|
|
<description>Invalid state usage fault</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>INVPC</name>
|
|
<description>Invalid PC load usage fault</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NOCP</name>
|
|
<description>No coprocessor usage fault.</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UNALIGNED</name>
|
|
<description>Unaligned access usage fault</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DIVBYZERO</name>
|
|
<description>Divide by zero usage fault</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>HFSR</name>
|
|
<displayName>HFSR</displayName>
|
|
<description>Hard fault status register</description>
|
|
<addressOffset>0x2C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>VECTTBL</name>
|
|
<description>Vector table hard fault</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FORCED</name>
|
|
<description>Forced hard fault</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DEBUG_VT</name>
|
|
<description>Reserved for Debug use</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>MMFAR</name>
|
|
<displayName>MMFAR</displayName>
|
|
<description>Memory management fault address register</description>
|
|
<addressOffset>0x34</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>MMFAR</name>
|
|
<description>Memory management fault address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>BFAR</name>
|
|
<displayName>BFAR</displayName>
|
|
<description>Bus fault address register</description>
|
|
<addressOffset>0x38</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>BFAR</name>
|
|
<description>Bus fault address</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>AFSR</name>
|
|
<displayName>AFSR</displayName>
|
|
<description>Auxiliary fault status register</description>
|
|
<addressOffset>0x3C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IMPDEF</name>
|
|
<description>Implementation defined</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>STK</name>
|
|
<description>SysTick timer</description>
|
|
<groupName>STK</groupName>
|
|
<baseAddress>0xE000E010</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x11</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>CTRL</name>
|
|
<displayName>CTRL</displayName>
|
|
<description>SysTick control and status register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ENABLE</name>
|
|
<description>Counter enable</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TICKINT</name>
|
|
<description>SysTick exception request enable</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>CLKSOURCE</name>
|
|
<description>Clock source selection</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>COUNTFLAG</name>
|
|
<description>COUNTFLAG</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>LOAD</name>
|
|
<displayName>LOAD</displayName>
|
|
<description>SysTick reload value register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>RELOAD</name>
|
|
<description>RELOAD value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>24</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>VAL</name>
|
|
<displayName>VAL</displayName>
|
|
<description>SysTick current value register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CURRENT</name>
|
|
<description>Current counter value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>24</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>CALIB</name>
|
|
<displayName>CALIB</displayName>
|
|
<description>SysTick calibration value register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>TENMS</name>
|
|
<description>Calibration value</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>24</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SKEW</name>
|
|
<description>SKEW flag: Indicates whether the TENMS value is exact</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>NOREF</name>
|
|
<description>NOREF flag. Reads as zero</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>MPU</name>
|
|
<description>Memory protection unit</description>
|
|
<groupName>MPU</groupName>
|
|
<baseAddress>0xE000ED90</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x15</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>MPU_TYPER</name>
|
|
<displayName>MPU_TYPER</displayName>
|
|
<description>MPU type register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0X00000800</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SEPARATE</name>
|
|
<description>Separate flag</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DREGION</name>
|
|
<description>Number of MPU data regions</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IREGION</name>
|
|
<description>Number of MPU instruction regions</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>MPU_CTRL</name>
|
|
<displayName>MPU_CTRL</displayName>
|
|
<description>MPU control register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ENABLE</name>
|
|
<description>Enables the MPU</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HFNMIENA</name>
|
|
<description>Enables the operation of MPU during hard fault</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>PRIVDEFENA</name>
|
|
<description>Enable priviliged software access to default memory map</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>MPU_RNR</name>
|
|
<displayName>MPU_RNR</displayName>
|
|
<description>MPU region number register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>REGION</name>
|
|
<description>MPU region</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>MPU_RBAR</name>
|
|
<displayName>MPU_RBAR</displayName>
|
|
<description>MPU region base address register</description>
|
|
<addressOffset>0xC</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>REGION</name>
|
|
<description>MPU region field</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>VALID</name>
|
|
<description>MPU region number valid</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ADDR</name>
|
|
<description>Region base address field</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>27</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>MPU_RASR</name>
|
|
<displayName>MPU_RASR</displayName>
|
|
<description>MPU region attribute and size register</description>
|
|
<addressOffset>0x10</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0X00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ENABLE</name>
|
|
<description>Region enable bit.</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SIZE</name>
|
|
<description>Size of the MPU protection region</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>5</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>SRD</name>
|
|
<description>Subregion disable bits</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>B</name>
|
|
<description>memory attribute</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C</name>
|
|
<description>memory attribute</description>
|
|
<bitOffset>17</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>S</name>
|
|
<description>Shareable memory attribute</description>
|
|
<bitOffset>18</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>TEX</name>
|
|
<description>memory attribute</description>
|
|
<bitOffset>19</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AP</name>
|
|
<description>Access permission</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>3</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>XN</name>
|
|
<description>Instruction access disable bit</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>FPU</name>
|
|
<description>Floting point unit</description>
|
|
<groupName>FPU</groupName>
|
|
<baseAddress>0xE000EF34</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0xD</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<interrupt>
|
|
<name>FPU</name>
|
|
<description>Floating point unit interrupt</description>
|
|
<value>54</value>
|
|
</interrupt>
|
|
<registers>
|
|
<register>
|
|
<name>FPCCR</name>
|
|
<displayName>FPCCR</displayName>
|
|
<description>Floating-point context control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>LSPACT</name>
|
|
<description>LSPACT</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>USER</name>
|
|
<description>USER</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>THREAD</name>
|
|
<description>THREAD</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>HFRDY</name>
|
|
<description>HFRDY</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MMRDY</name>
|
|
<description>MMRDY</description>
|
|
<bitOffset>5</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>BFRDY</name>
|
|
<description>BFRDY</description>
|
|
<bitOffset>6</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>MONRDY</name>
|
|
<description>MONRDY</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>LSPEN</name>
|
|
<description>LSPEN</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>ASPEN</name>
|
|
<description>ASPEN</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FPCAR</name>
|
|
<displayName>FPCAR</displayName>
|
|
<description>Floating-point context address register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ADDRESS</name>
|
|
<description>Location of unpopulated floating-point</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>29</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>FPSCR</name>
|
|
<displayName>FPSCR</displayName>
|
|
<description>Floating-point status control register</description>
|
|
<addressOffset>0x8</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IOC</name>
|
|
<description>Invalid operation cumulative exception bit</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DZC</name>
|
|
<description>Division by zero cumulative exception bit.</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>OFC</name>
|
|
<description>Overflow cumulative exception bit</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>UFC</name>
|
|
<description>Underflow cumulative exception bit</description>
|
|
<bitOffset>3</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IXC</name>
|
|
<description>Inexact cumulative exception bit</description>
|
|
<bitOffset>4</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IDC</name>
|
|
<description>Input denormal cumulative exception bit.</description>
|
|
<bitOffset>7</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>RMode</name>
|
|
<description>Rounding Mode control field</description>
|
|
<bitOffset>22</bitOffset>
|
|
<bitWidth>2</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>FZ</name>
|
|
<description>Flush-to-zero mode control bit:</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DN</name>
|
|
<description>Default NaN mode control bit</description>
|
|
<bitOffset>25</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>AHP</name>
|
|
<description>Alternative half-precision control bit</description>
|
|
<bitOffset>26</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>V</name>
|
|
<description>Overflow condition code flag</description>
|
|
<bitOffset>28</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>C</name>
|
|
<description>Carry condition code flag</description>
|
|
<bitOffset>29</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>Z</name>
|
|
<description>Zero condition code flag</description>
|
|
<bitOffset>30</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>N</name>
|
|
<description>Negative condition code flag</description>
|
|
<bitOffset>31</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>NVIC</name>
|
|
<description>Nested Vectored Interrupt Controller</description>
|
|
<groupName>NVIC</groupName>
|
|
<baseAddress>0xE000E100</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x351</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>ISER0</name>
|
|
<displayName>ISER0</displayName>
|
|
<description>Interrupt Set-Enable Register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SETENA</name>
|
|
<description>SETENA</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISER1</name>
|
|
<displayName>ISER1</displayName>
|
|
<description>Interrupt Set-Enable Register</description>
|
|
<addressOffset>0x4</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SETENA</name>
|
|
<description>SETENA</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICER0</name>
|
|
<displayName>ICER0</displayName>
|
|
<description>Interrupt Clear-Enable Register</description>
|
|
<addressOffset>0x80</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CLRENA</name>
|
|
<description>CLRENA</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICER1</name>
|
|
<displayName>ICER1</displayName>
|
|
<description>Interrupt Clear-Enable Register</description>
|
|
<addressOffset>0x84</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CLRENA</name>
|
|
<description>CLRENA</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISPR0</name>
|
|
<displayName>ISPR0</displayName>
|
|
<description>Interrupt Set-Pending Register</description>
|
|
<addressOffset>0x100</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SETPEND</name>
|
|
<description>SETPEND</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ISPR1</name>
|
|
<displayName>ISPR1</displayName>
|
|
<description>Interrupt Set-Pending Register</description>
|
|
<addressOffset>0x104</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>SETPEND</name>
|
|
<description>SETPEND</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICPR0</name>
|
|
<displayName>ICPR0</displayName>
|
|
<description>Interrupt Clear-Pending Register</description>
|
|
<addressOffset>0x180</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CLRPEND</name>
|
|
<description>CLRPEND</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>ICPR1</name>
|
|
<displayName>ICPR1</displayName>
|
|
<description>Interrupt Clear-Pending Register</description>
|
|
<addressOffset>0x184</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CLRPEND</name>
|
|
<description>CLRPEND</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IABR0</name>
|
|
<displayName>IABR0</displayName>
|
|
<description>Interrupt Active Bit Register</description>
|
|
<addressOffset>0x200</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ACTIVE</name>
|
|
<description>ACTIVE</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IABR1</name>
|
|
<displayName>IABR1</displayName>
|
|
<description>Interrupt Active Bit Register</description>
|
|
<addressOffset>0x204</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-only</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>ACTIVE</name>
|
|
<description>ACTIVE</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>32</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR0</name>
|
|
<displayName>IPR0</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x300</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR1</name>
|
|
<displayName>IPR1</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x304</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR2</name>
|
|
<displayName>IPR2</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x308</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR3</name>
|
|
<displayName>IPR3</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x30C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR4</name>
|
|
<displayName>IPR4</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x310</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR5</name>
|
|
<displayName>IPR5</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x314</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR6</name>
|
|
<displayName>IPR6</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x318</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR7</name>
|
|
<displayName>IPR7</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x31C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR8</name>
|
|
<displayName>IPR8</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x320</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR9</name>
|
|
<displayName>IPR9</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x324</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR10</name>
|
|
<displayName>IPR10</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x328</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR11</name>
|
|
<displayName>IPR11</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x32C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR12</name>
|
|
<displayName>IPR12</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x330</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR13</name>
|
|
<displayName>IPR13</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x334</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR14</name>
|
|
<displayName>IPR14</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x338</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR15</name>
|
|
<displayName>IPR15</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x33C</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR16</name>
|
|
<displayName>IPR16</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x340</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
<register>
|
|
<name>IPR17</name>
|
|
<displayName>IPR17</displayName>
|
|
<description>Interrupt Priority Register</description>
|
|
<addressOffset>0x344</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>IPR_N0</name>
|
|
<description>IPR_N0</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N1</name>
|
|
<description>IPR_N1</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N2</name>
|
|
<description>IPR_N2</description>
|
|
<bitOffset>16</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>IPR_N3</name>
|
|
<description>IPR_N3</description>
|
|
<bitOffset>24</bitOffset>
|
|
<bitWidth>8</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>NVIC_STIR</name>
|
|
<description>Nested vectored interrupt controller</description>
|
|
<groupName>NVIC</groupName>
|
|
<baseAddress>0xE000EF00</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x5</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>STIR</name>
|
|
<displayName>STIR</displayName>
|
|
<description>Software trigger interrupt register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>INTID</name>
|
|
<description>Software generated interrupt ID</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>9</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>SCB_ACTRL</name>
|
|
<description>System control block ACTLR</description>
|
|
<groupName>SCB</groupName>
|
|
<baseAddress>0xE000E008</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x5</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>ACTRL</name>
|
|
<displayName>ACTRL</displayName>
|
|
<description>Auxiliary control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x00000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>DISMCYCINT</name>
|
|
<description>DISMCYCINT</description>
|
|
<bitOffset>0</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DISDEFWBUF</name>
|
|
<description>DISDEFWBUF</description>
|
|
<bitOffset>1</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DISFOLD</name>
|
|
<description>DISFOLD</description>
|
|
<bitOffset>2</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DISFPCA</name>
|
|
<description>DISFPCA</description>
|
|
<bitOffset>8</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
<field>
|
|
<name>DISOOFP</name>
|
|
<description>DISOOFP</description>
|
|
<bitOffset>9</bitOffset>
|
|
<bitWidth>1</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
<peripheral>
|
|
<name>FPU_CPACR</name>
|
|
<description>Floating point unit CPACR</description>
|
|
<groupName>FPU</groupName>
|
|
<baseAddress>0xE000ED88</baseAddress>
|
|
<addressBlock>
|
|
<offset>0x0</offset>
|
|
<size>0x5</size>
|
|
<usage>registers</usage>
|
|
</addressBlock>
|
|
<registers>
|
|
<register>
|
|
<name>CPACR</name>
|
|
<displayName>CPACR</displayName>
|
|
<description>Coprocessor access control register</description>
|
|
<addressOffset>0x0</addressOffset>
|
|
<size>0x20</size>
|
|
<access>read-write</access>
|
|
<resetValue>0x0000000</resetValue>
|
|
<fields>
|
|
<field>
|
|
<name>CP</name>
|
|
<description>CP</description>
|
|
<bitOffset>20</bitOffset>
|
|
<bitWidth>4</bitWidth>
|
|
</field>
|
|
</fields>
|
|
</register>
|
|
</registers>
|
|
</peripheral>
|
|
</peripherals>
|
|
</device>
|