mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-29 08:15:34 +03:00
6f3f2fa1e7
by g3gg0
667 lines
22 KiB
C
667 lines
22 KiB
C
#include "digital_signal.h"
|
|
|
|
#include <furi.h>
|
|
#include <furi_hal.h>
|
|
#include <furi_hal_resources.h>
|
|
#include <math.h>
|
|
|
|
#include <stm32wbxx_ll_dma.h>
|
|
#include <stm32wbxx_ll_tim.h>
|
|
|
|
/* must be on bank B */
|
|
// For debugging purposes use `--extra-define=DIGITAL_SIGNAL_DEBUG_OUTPUT_PIN=gpio_ext_pb3` fbt option
|
|
|
|
struct ReloadBuffer {
|
|
uint32_t* buffer; /* DMA ringbuffer */
|
|
uint32_t size; /* maximum entry count of the ring buffer */
|
|
uint32_t write_pos; /* current buffer write index */
|
|
uint32_t read_pos; /* current buffer read index */
|
|
bool dma_active;
|
|
};
|
|
|
|
struct DigitalSequence {
|
|
uint8_t signals_size;
|
|
bool bake;
|
|
uint32_t sequence_used;
|
|
uint32_t sequence_size;
|
|
DigitalSignal** signals;
|
|
uint8_t* sequence;
|
|
const GpioPin* gpio;
|
|
uint32_t send_time;
|
|
bool send_time_active;
|
|
LL_DMA_InitTypeDef dma_config_gpio;
|
|
LL_DMA_InitTypeDef dma_config_timer;
|
|
uint32_t* gpio_buff;
|
|
struct ReloadBuffer* dma_buffer;
|
|
};
|
|
|
|
struct DigitalSignalInternals {
|
|
uint64_t factor;
|
|
uint32_t reload_reg_entries;
|
|
uint32_t reload_reg_remainder;
|
|
uint32_t gpio_buff[2];
|
|
const GpioPin* gpio;
|
|
LL_DMA_InitTypeDef dma_config_gpio;
|
|
LL_DMA_InitTypeDef dma_config_timer;
|
|
};
|
|
|
|
#define TAG "DigitalSignal"
|
|
|
|
#define F_TIM (64000000.0)
|
|
#define T_TIM 1562 /* 15.625 ns *100 */
|
|
#define T_TIM_DIV2 781 /* 15.625 ns / 2 *100 */
|
|
|
|
/* end marker in DMA ringbuffer, will get written into timer register at the end */
|
|
#define SEQ_TIMER_MAX 0xFFFFFFFF
|
|
|
|
/* time to wait in loops before returning */
|
|
#define SEQ_LOCK_WAIT_MS 10UL
|
|
#define SEQ_LOCK_WAIT_TICKS (SEQ_LOCK_WAIT_MS * 1000 * 64)
|
|
|
|
/* maximum entry count of the sequence dma ring buffer */
|
|
#define RINGBUFFER_SIZE 128
|
|
|
|
/* maximum number of DigitalSignals in a sequence */
|
|
#define SEQUENCE_SIGNALS_SIZE 32
|
|
/*
|
|
* if sequence size runs out from the initial value passed to digital_sequence_alloc
|
|
* the size will be increased by this amount and reallocated
|
|
*/
|
|
#define SEQUENCE_SIZE_REALLOCATE_INCREMENT 256
|
|
|
|
DigitalSignal* digital_signal_alloc(uint32_t max_edges_cnt) {
|
|
DigitalSignal* signal = malloc(sizeof(DigitalSignal));
|
|
signal->start_level = true;
|
|
signal->edges_max_cnt = max_edges_cnt;
|
|
signal->edge_timings = malloc(signal->edges_max_cnt * sizeof(uint32_t));
|
|
signal->edge_cnt = 0;
|
|
signal->reload_reg_buff = malloc(signal->edges_max_cnt * sizeof(uint32_t));
|
|
|
|
signal->internals = malloc(sizeof(DigitalSignalInternals));
|
|
DigitalSignalInternals* internals = signal->internals;
|
|
|
|
internals->factor = 1024 * 1024;
|
|
|
|
internals->dma_config_gpio.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
|
|
internals->dma_config_gpio.Mode = LL_DMA_MODE_CIRCULAR;
|
|
internals->dma_config_gpio.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
|
|
internals->dma_config_gpio.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
|
|
internals->dma_config_gpio.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
|
|
internals->dma_config_gpio.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
|
|
internals->dma_config_gpio.NbData = 2;
|
|
internals->dma_config_gpio.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
|
|
internals->dma_config_gpio.Priority = LL_DMA_PRIORITY_VERYHIGH;
|
|
|
|
internals->dma_config_timer.PeriphOrM2MSrcAddress = (uint32_t) & (TIM2->ARR);
|
|
internals->dma_config_timer.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
|
|
internals->dma_config_timer.Mode = LL_DMA_MODE_NORMAL;
|
|
internals->dma_config_timer.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
|
|
internals->dma_config_timer.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
|
|
internals->dma_config_timer.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
|
|
internals->dma_config_timer.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
|
|
internals->dma_config_timer.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
|
|
internals->dma_config_timer.Priority = LL_DMA_PRIORITY_HIGH;
|
|
|
|
return signal;
|
|
}
|
|
|
|
void digital_signal_free(DigitalSignal* signal) {
|
|
furi_assert(signal);
|
|
|
|
free(signal->edge_timings);
|
|
free(signal->reload_reg_buff);
|
|
free(signal->internals);
|
|
free(signal);
|
|
}
|
|
|
|
bool digital_signal_append(DigitalSignal* signal_a, DigitalSignal* signal_b) {
|
|
furi_assert(signal_a);
|
|
furi_assert(signal_b);
|
|
|
|
if(signal_a->edges_max_cnt < signal_a->edge_cnt + signal_b->edge_cnt) {
|
|
return false;
|
|
}
|
|
/* in case there are no edges in our target signal, the signal to append makes the rules */
|
|
if(!signal_a->edge_cnt) {
|
|
signal_a->start_level = signal_b->start_level;
|
|
}
|
|
bool end_level = signal_a->start_level;
|
|
if(signal_a->edge_cnt) {
|
|
end_level = signal_a->start_level ^ !(signal_a->edge_cnt % 2);
|
|
}
|
|
uint8_t start_copy = 0;
|
|
if(end_level == signal_b->start_level) {
|
|
if(signal_a->edge_cnt) {
|
|
signal_a->edge_timings[signal_a->edge_cnt - 1] += signal_b->edge_timings[0];
|
|
start_copy += 1;
|
|
} else {
|
|
signal_a->edge_timings[signal_a->edge_cnt] += signal_b->edge_timings[0];
|
|
}
|
|
}
|
|
|
|
for(size_t i = 0; i < signal_b->edge_cnt - start_copy; i++) {
|
|
signal_a->edge_timings[signal_a->edge_cnt + i] = signal_b->edge_timings[start_copy + i];
|
|
}
|
|
signal_a->edge_cnt += signal_b->edge_cnt - start_copy;
|
|
|
|
return true;
|
|
}
|
|
|
|
bool digital_signal_get_start_level(DigitalSignal* signal) {
|
|
furi_assert(signal);
|
|
|
|
return signal->start_level;
|
|
}
|
|
|
|
uint32_t digital_signal_get_edges_cnt(DigitalSignal* signal) {
|
|
furi_assert(signal);
|
|
|
|
return signal->edge_cnt;
|
|
}
|
|
|
|
void digital_signal_add(DigitalSignal* signal, uint32_t ticks) {
|
|
furi_assert(signal);
|
|
furi_assert(signal->edge_cnt < signal->edges_max_cnt);
|
|
|
|
signal->edge_timings[signal->edge_cnt++] = ticks;
|
|
}
|
|
|
|
void digital_signal_add_pulse(DigitalSignal* signal, uint32_t ticks, bool level) {
|
|
furi_assert(signal);
|
|
furi_assert(signal->edge_cnt < signal->edges_max_cnt);
|
|
|
|
/* virgin signal? add it as the only level */
|
|
if(signal->edge_cnt == 0) {
|
|
signal->start_level = level;
|
|
signal->edge_timings[signal->edge_cnt++] = ticks;
|
|
} else {
|
|
bool end_level = signal->start_level ^ !(signal->edge_cnt % 2);
|
|
|
|
if(level != end_level) {
|
|
signal->edge_timings[signal->edge_cnt++] = ticks;
|
|
} else {
|
|
signal->edge_timings[signal->edge_cnt - 1] += ticks;
|
|
}
|
|
}
|
|
}
|
|
|
|
uint32_t digital_signal_get_edge(DigitalSignal* signal, uint32_t edge_num) {
|
|
furi_assert(signal);
|
|
furi_assert(edge_num < signal->edge_cnt);
|
|
|
|
return signal->edge_timings[edge_num];
|
|
}
|
|
|
|
void digital_signal_prepare_arr(DigitalSignal* signal) {
|
|
furi_assert(signal);
|
|
|
|
DigitalSignalInternals* internals = signal->internals;
|
|
|
|
/* set up signal polarities */
|
|
if(internals->gpio) {
|
|
uint32_t bit_set = internals->gpio->pin;
|
|
uint32_t bit_reset = internals->gpio->pin << 16;
|
|
|
|
#ifdef DIGITAL_SIGNAL_DEBUG_OUTPUT_PIN
|
|
bit_set |= DIGITAL_SIGNAL_DEBUG_OUTPUT_PIN.pin;
|
|
bit_reset |= DIGITAL_SIGNAL_DEBUG_OUTPUT_PIN.pin << 16;
|
|
#endif
|
|
|
|
if(signal->start_level) {
|
|
internals->gpio_buff[0] = bit_set;
|
|
internals->gpio_buff[1] = bit_reset;
|
|
} else {
|
|
internals->gpio_buff[0] = bit_reset;
|
|
internals->gpio_buff[1] = bit_set;
|
|
}
|
|
}
|
|
|
|
/* set up edge timings */
|
|
internals->reload_reg_entries = 0;
|
|
|
|
for(size_t pos = 0; pos < signal->edge_cnt; pos++) {
|
|
uint32_t pulse_duration = signal->edge_timings[pos] + internals->reload_reg_remainder;
|
|
if(pulse_duration < 10 || pulse_duration > 10000000) {
|
|
FURI_LOG_D(
|
|
TAG,
|
|
"[prepare] pulse_duration out of range: %lu = %lu * %llu",
|
|
pulse_duration,
|
|
signal->edge_timings[pos],
|
|
internals->factor);
|
|
pulse_duration = 100;
|
|
}
|
|
uint32_t pulse_ticks = (pulse_duration + T_TIM_DIV2) / T_TIM;
|
|
internals->reload_reg_remainder = pulse_duration - (pulse_ticks * T_TIM);
|
|
|
|
if(pulse_ticks > 1) {
|
|
signal->reload_reg_buff[internals->reload_reg_entries++] = pulse_ticks - 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void digital_signal_stop_dma() {
|
|
LL_DMA_DisableChannel(DMA1, LL_DMA_CHANNEL_1);
|
|
LL_DMA_DisableChannel(DMA1, LL_DMA_CHANNEL_2);
|
|
LL_DMA_ClearFlag_TC1(DMA1);
|
|
LL_DMA_ClearFlag_TC2(DMA1);
|
|
}
|
|
|
|
static void digital_signal_stop_timer() {
|
|
LL_TIM_DisableCounter(TIM2);
|
|
LL_TIM_DisableUpdateEvent(TIM2);
|
|
LL_TIM_DisableDMAReq_UPDATE(TIM2);
|
|
|
|
furi_hal_bus_disable(FuriHalBusTIM2);
|
|
}
|
|
|
|
static void digital_signal_setup_timer() {
|
|
furi_hal_bus_enable(FuriHalBusTIM2);
|
|
|
|
LL_TIM_SetCounterMode(TIM2, LL_TIM_COUNTERMODE_UP);
|
|
LL_TIM_SetClockDivision(TIM2, LL_TIM_CLOCKDIVISION_DIV1);
|
|
LL_TIM_SetPrescaler(TIM2, 0);
|
|
LL_TIM_SetAutoReload(TIM2, SEQ_TIMER_MAX);
|
|
LL_TIM_SetCounter(TIM2, 0);
|
|
}
|
|
|
|
static void digital_signal_start_timer() {
|
|
LL_TIM_EnableCounter(TIM2);
|
|
LL_TIM_EnableUpdateEvent(TIM2);
|
|
LL_TIM_EnableDMAReq_UPDATE(TIM2);
|
|
LL_TIM_GenerateEvent_UPDATE(TIM2);
|
|
}
|
|
|
|
static bool digital_signal_setup_dma(DigitalSignal* signal) {
|
|
furi_assert(signal);
|
|
DigitalSignalInternals* internals = signal->internals;
|
|
|
|
if(!signal->internals->reload_reg_entries) {
|
|
return false;
|
|
}
|
|
digital_signal_stop_dma();
|
|
|
|
internals->dma_config_gpio.MemoryOrM2MDstAddress = (uint32_t)internals->gpio_buff;
|
|
internals->dma_config_gpio.PeriphOrM2MSrcAddress = (uint32_t) & (internals->gpio->port->BSRR);
|
|
internals->dma_config_timer.MemoryOrM2MDstAddress = (uint32_t)signal->reload_reg_buff;
|
|
internals->dma_config_timer.NbData = signal->internals->reload_reg_entries;
|
|
|
|
/* set up DMA channel 1 and 2 for GPIO and timer copy operations */
|
|
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_1, &internals->dma_config_gpio);
|
|
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_2, &internals->dma_config_timer);
|
|
|
|
/* enable both DMA channels */
|
|
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_1);
|
|
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_2);
|
|
|
|
return true;
|
|
}
|
|
|
|
void digital_signal_send(DigitalSignal* signal, const GpioPin* gpio) {
|
|
furi_assert(signal);
|
|
|
|
if(!signal->edge_cnt) {
|
|
return;
|
|
}
|
|
|
|
/* Configure gpio as output */
|
|
signal->internals->gpio = gpio;
|
|
furi_hal_gpio_init(
|
|
signal->internals->gpio, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh);
|
|
|
|
digital_signal_prepare_arr(signal);
|
|
|
|
digital_signal_setup_dma(signal);
|
|
digital_signal_setup_timer();
|
|
digital_signal_start_timer();
|
|
|
|
while(!LL_DMA_IsActiveFlag_TC2(DMA1)) {
|
|
}
|
|
|
|
digital_signal_stop_timer();
|
|
digital_signal_stop_dma();
|
|
}
|
|
|
|
static void digital_sequence_alloc_signals(DigitalSequence* sequence, uint32_t size) {
|
|
sequence->signals_size = size;
|
|
sequence->signals = malloc(sequence->signals_size * sizeof(DigitalSignal*));
|
|
}
|
|
|
|
static void digital_sequence_alloc_sequence(DigitalSequence* sequence, uint32_t size) {
|
|
sequence->sequence_used = 0;
|
|
sequence->sequence_size = size;
|
|
sequence->sequence = malloc(sequence->sequence_size);
|
|
sequence->send_time = 0;
|
|
sequence->send_time_active = false;
|
|
}
|
|
|
|
DigitalSequence* digital_sequence_alloc(uint32_t size, const GpioPin* gpio) {
|
|
furi_assert(gpio);
|
|
|
|
DigitalSequence* sequence = malloc(sizeof(DigitalSequence));
|
|
|
|
sequence->gpio = gpio;
|
|
sequence->bake = false;
|
|
|
|
sequence->dma_buffer = malloc(sizeof(struct ReloadBuffer));
|
|
sequence->dma_buffer->size = RINGBUFFER_SIZE;
|
|
sequence->dma_buffer->buffer = malloc(sequence->dma_buffer->size * sizeof(uint32_t));
|
|
|
|
sequence->dma_config_gpio.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
|
|
sequence->dma_config_gpio.Mode = LL_DMA_MODE_CIRCULAR;
|
|
sequence->dma_config_gpio.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
|
|
sequence->dma_config_gpio.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
|
|
sequence->dma_config_gpio.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
|
|
sequence->dma_config_gpio.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
|
|
sequence->dma_config_gpio.NbData = 2;
|
|
sequence->dma_config_gpio.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
|
|
sequence->dma_config_gpio.Priority = LL_DMA_PRIORITY_VERYHIGH;
|
|
|
|
sequence->dma_config_timer.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
|
|
sequence->dma_config_timer.Mode = LL_DMA_MODE_CIRCULAR;
|
|
sequence->dma_config_timer.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
|
|
sequence->dma_config_timer.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
|
|
sequence->dma_config_timer.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
|
|
sequence->dma_config_timer.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
|
|
sequence->dma_config_timer.PeriphOrM2MSrcAddress = (uint32_t) & (TIM2->ARR);
|
|
sequence->dma_config_timer.MemoryOrM2MDstAddress = (uint32_t)sequence->dma_buffer->buffer;
|
|
sequence->dma_config_timer.NbData = sequence->dma_buffer->size;
|
|
sequence->dma_config_timer.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
|
|
sequence->dma_config_timer.Priority = LL_DMA_PRIORITY_HIGH;
|
|
|
|
digital_sequence_alloc_signals(sequence, SEQUENCE_SIGNALS_SIZE);
|
|
digital_sequence_alloc_sequence(sequence, size);
|
|
|
|
return sequence;
|
|
}
|
|
|
|
void digital_sequence_free(DigitalSequence* sequence) {
|
|
furi_assert(sequence);
|
|
|
|
free(sequence->signals);
|
|
free(sequence->sequence);
|
|
free(sequence->dma_buffer->buffer);
|
|
free(sequence->dma_buffer);
|
|
free(sequence);
|
|
}
|
|
|
|
void digital_sequence_set_signal(
|
|
DigitalSequence* sequence,
|
|
uint8_t signal_index,
|
|
DigitalSignal* signal) {
|
|
furi_assert(sequence);
|
|
furi_assert(signal);
|
|
furi_assert(signal_index < sequence->signals_size);
|
|
|
|
sequence->signals[signal_index] = signal;
|
|
signal->internals->gpio = sequence->gpio;
|
|
signal->internals->reload_reg_remainder = 0;
|
|
|
|
digital_signal_prepare_arr(signal);
|
|
}
|
|
|
|
void digital_sequence_set_sendtime(DigitalSequence* sequence, uint32_t send_time) {
|
|
furi_assert(sequence);
|
|
|
|
sequence->send_time = send_time;
|
|
sequence->send_time_active = true;
|
|
}
|
|
|
|
void digital_sequence_add(DigitalSequence* sequence, uint8_t signal_index) {
|
|
furi_assert(sequence);
|
|
furi_assert(signal_index < sequence->signals_size);
|
|
|
|
if(sequence->sequence_used >= sequence->sequence_size) {
|
|
sequence->sequence_size += SEQUENCE_SIZE_REALLOCATE_INCREMENT;
|
|
sequence->sequence = realloc(sequence->sequence, sequence->sequence_size); //-V701
|
|
furi_assert(sequence->sequence);
|
|
}
|
|
|
|
sequence->sequence[sequence->sequence_used++] = signal_index;
|
|
}
|
|
|
|
static bool digital_sequence_setup_dma(DigitalSequence* sequence) {
|
|
furi_assert(sequence);
|
|
|
|
digital_signal_stop_dma();
|
|
|
|
sequence->dma_config_gpio.MemoryOrM2MDstAddress = (uint32_t)sequence->gpio_buff;
|
|
sequence->dma_config_gpio.PeriphOrM2MSrcAddress = (uint32_t) & (sequence->gpio->port->BSRR);
|
|
|
|
/* set up DMA channel 1 and 2 for GPIO and timer copy operations */
|
|
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_1, &sequence->dma_config_gpio);
|
|
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_2, &sequence->dma_config_timer);
|
|
|
|
/* enable both DMA channels */
|
|
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_1);
|
|
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_2);
|
|
|
|
return true;
|
|
}
|
|
|
|
static DigitalSignal* digital_sequence_bake(DigitalSequence* sequence) {
|
|
furi_assert(sequence);
|
|
|
|
uint32_t edges = 0;
|
|
|
|
for(uint32_t pos = 0; pos < sequence->sequence_used; pos++) {
|
|
uint8_t signal_index = sequence->sequence[pos];
|
|
DigitalSignal* sig = sequence->signals[signal_index];
|
|
|
|
edges += sig->edge_cnt;
|
|
}
|
|
|
|
DigitalSignal* ret = digital_signal_alloc(edges);
|
|
|
|
for(uint32_t pos = 0; pos < sequence->sequence_used; pos++) {
|
|
uint8_t signal_index = sequence->sequence[pos];
|
|
DigitalSignal* sig = sequence->signals[signal_index];
|
|
|
|
digital_signal_append(ret, sig);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void digital_sequence_finish(DigitalSequence* sequence) {
|
|
struct ReloadBuffer* dma_buffer = sequence->dma_buffer;
|
|
|
|
if(dma_buffer->dma_active) {
|
|
uint32_t prev_timer = DWT->CYCCNT;
|
|
do {
|
|
/* we are finished, when the DMA transferred the SEQ_TIMER_MAX marker */
|
|
if(TIM2->ARR == SEQ_TIMER_MAX) {
|
|
break;
|
|
}
|
|
if(DWT->CYCCNT - prev_timer > SEQ_LOCK_WAIT_TICKS) {
|
|
dma_buffer->read_pos =
|
|
RINGBUFFER_SIZE - LL_DMA_GetDataLength(DMA1, LL_DMA_CHANNEL_2);
|
|
FURI_LOG_D(
|
|
TAG,
|
|
"[SEQ] hung %lu ms in finish (ARR 0x%08lx, read %lu, write %lu)",
|
|
SEQ_LOCK_WAIT_MS,
|
|
TIM2->ARR,
|
|
dma_buffer->read_pos,
|
|
dma_buffer->write_pos);
|
|
break;
|
|
}
|
|
} while(1);
|
|
}
|
|
|
|
digital_signal_stop_timer();
|
|
digital_signal_stop_dma();
|
|
}
|
|
|
|
static void digital_sequence_queue_pulse(DigitalSequence* sequence, uint32_t length) {
|
|
struct ReloadBuffer* dma_buffer = sequence->dma_buffer;
|
|
|
|
if(dma_buffer->dma_active) {
|
|
uint32_t prev_timer = DWT->CYCCNT;
|
|
do {
|
|
dma_buffer->read_pos = RINGBUFFER_SIZE - LL_DMA_GetDataLength(DMA1, LL_DMA_CHANNEL_2);
|
|
|
|
uint32_t free =
|
|
(RINGBUFFER_SIZE + dma_buffer->read_pos - dma_buffer->write_pos) % RINGBUFFER_SIZE;
|
|
|
|
if(free > 2) {
|
|
break;
|
|
}
|
|
|
|
if(DWT->CYCCNT - prev_timer > SEQ_LOCK_WAIT_TICKS) {
|
|
FURI_LOG_D(
|
|
TAG,
|
|
"[SEQ] hung %lu ms in queue (ARR 0x%08lx, read %lu, write %lu)",
|
|
SEQ_LOCK_WAIT_MS,
|
|
TIM2->ARR,
|
|
dma_buffer->read_pos,
|
|
dma_buffer->write_pos);
|
|
break;
|
|
}
|
|
if(TIM2->ARR == SEQ_TIMER_MAX) {
|
|
FURI_LOG_D(
|
|
TAG,
|
|
"[SEQ] buffer underrun in queue (ARR 0x%08lx, read %lu, write %lu)",
|
|
TIM2->ARR,
|
|
dma_buffer->read_pos,
|
|
dma_buffer->write_pos);
|
|
break;
|
|
}
|
|
} while(1);
|
|
}
|
|
|
|
dma_buffer->buffer[dma_buffer->write_pos] = length;
|
|
dma_buffer->write_pos++;
|
|
dma_buffer->write_pos %= RINGBUFFER_SIZE;
|
|
dma_buffer->buffer[dma_buffer->write_pos] = SEQ_TIMER_MAX;
|
|
}
|
|
|
|
bool digital_sequence_send(DigitalSequence* sequence) {
|
|
furi_assert(sequence);
|
|
|
|
struct ReloadBuffer* dma_buffer = sequence->dma_buffer;
|
|
|
|
furi_hal_gpio_init(sequence->gpio, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh);
|
|
#ifdef DIGITAL_SIGNAL_DEBUG_OUTPUT_PIN
|
|
furi_hal_gpio_init(
|
|
&DIGITAL_SIGNAL_DEBUG_OUTPUT_PIN, GpioModeOutputPushPull, GpioPullNo, GpioSpeedVeryHigh);
|
|
#endif
|
|
|
|
if(sequence->bake) {
|
|
DigitalSignal* sig = digital_sequence_bake(sequence);
|
|
|
|
digital_signal_send(sig, sequence->gpio);
|
|
digital_signal_free(sig);
|
|
return true;
|
|
}
|
|
|
|
if(!sequence->sequence_used) {
|
|
return false;
|
|
}
|
|
|
|
int32_t remainder = 0;
|
|
uint32_t trade_for_next = 0;
|
|
uint32_t seq_pos_next = 1;
|
|
|
|
dma_buffer->dma_active = false;
|
|
dma_buffer->buffer[0] = SEQ_TIMER_MAX;
|
|
dma_buffer->read_pos = 0;
|
|
dma_buffer->write_pos = 0;
|
|
|
|
/* already prepare the current signal pointer */
|
|
DigitalSignal* sig = sequence->signals[sequence->sequence[0]];
|
|
DigitalSignal* sig_next = NULL;
|
|
/* re-use the GPIO buffer from the first signal */
|
|
sequence->gpio_buff = sig->internals->gpio_buff;
|
|
|
|
FURI_CRITICAL_ENTER();
|
|
|
|
while(sig) {
|
|
bool last_signal = (seq_pos_next >= sequence->sequence_used);
|
|
|
|
if(!last_signal) {
|
|
sig_next = sequence->signals[sequence->sequence[seq_pos_next++]];
|
|
}
|
|
|
|
for(uint32_t pulse_pos = 0; pulse_pos < sig->internals->reload_reg_entries; pulse_pos++) {
|
|
bool last_pulse = ((pulse_pos + 1) >= sig->internals->reload_reg_entries);
|
|
uint32_t pulse_length = sig->reload_reg_buff[pulse_pos] + trade_for_next;
|
|
|
|
trade_for_next = 0;
|
|
|
|
/* when we are too late more than half a tick, make the first edge temporarily longer */
|
|
if(remainder >= T_TIM_DIV2) {
|
|
remainder -= T_TIM;
|
|
pulse_length += 1;
|
|
}
|
|
|
|
/* last pulse in current signal and have a next signal? */
|
|
if(last_pulse && sig_next) {
|
|
/* when a signal ends with the same level as the next signal begins, let the next signal generate the whole pulse.
|
|
beware, we do not want the level after the last edge, but the last level before that edge */
|
|
bool end_level = sig->start_level ^ ((sig->edge_cnt % 2) == 0);
|
|
|
|
/* if they have the same level, pass the duration to the next pulse(s) */
|
|
if(end_level == sig_next->start_level) {
|
|
trade_for_next = pulse_length;
|
|
}
|
|
}
|
|
|
|
/* if it was decided, that the next signal's first pulse shall also handle our "length", then do not queue here */
|
|
if(!trade_for_next) {
|
|
digital_sequence_queue_pulse(sequence, pulse_length);
|
|
|
|
if(!dma_buffer->dma_active) {
|
|
/* start transmission when buffer was filled enough */
|
|
bool start_send = sequence->dma_buffer->write_pos >= (RINGBUFFER_SIZE - 2);
|
|
|
|
/* or it was the last pulse */
|
|
if(last_pulse && last_signal) {
|
|
start_send = true;
|
|
}
|
|
|
|
/* start transmission */
|
|
if(start_send) {
|
|
digital_sequence_setup_dma(sequence);
|
|
digital_signal_setup_timer();
|
|
|
|
/* if the send time is specified, wait till the core timer passed beyond that time */
|
|
if(sequence->send_time_active) {
|
|
sequence->send_time_active = false;
|
|
while(sequence->send_time - DWT->CYCCNT < 0x80000000) {
|
|
}
|
|
}
|
|
digital_signal_start_timer();
|
|
dma_buffer->dma_active = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
remainder += sig->internals->reload_reg_remainder;
|
|
sig = sig_next;
|
|
sig_next = NULL;
|
|
}
|
|
|
|
/* wait until last dma transaction was finished */
|
|
FURI_CRITICAL_EXIT();
|
|
digital_sequence_finish(sequence);
|
|
|
|
return true;
|
|
}
|
|
|
|
void digital_sequence_clear(DigitalSequence* sequence) {
|
|
furi_assert(sequence);
|
|
|
|
sequence->sequence_used = 0;
|
|
}
|
|
|
|
void digital_sequence_timebase_correction(DigitalSequence* sequence, float factor) {
|
|
for(uint32_t sig_pos = 0; sig_pos < sequence->signals_size; sig_pos++) {
|
|
DigitalSignal* signal = sequence->signals[sig_pos];
|
|
|
|
if(signal) {
|
|
signal->internals->factor = (uint32_t)(1024 * 1024 * factor);
|
|
digital_signal_prepare_arr(signal);
|
|
}
|
|
}
|
|
}
|