macaw/doc/ImplementationOverview.org

* Detailed approach

  We will implement a /macaw/ ~ArchitectureInfo~ for each backend, starting with
  PowerPC.  There is a lot in this structure, so we will start by just
  implementing a ~DisassembleFn~, which has the type:

  #+BEGIN_SRC haskell
    type DisassembleFn arch
     = forall ids
     .  Memory (ArchAddrWidth arch)
     -> NonceGenerator (ST ids) ids
     -> ArchSegmentOff arch
        -- ^ The offset to start reading from.
     -> ArchAddrWord arch
        -- ^ Maximum offset for this to read from.
     -> AbsBlockState (ArchReg arch)
        -- ^ Abstract state associated with address that we are disassembling
        -- from.
        --
        -- This is used for things like the height of the x87 stack.
     -> ST ids ([Block arch ids], MemWord (ArchAddrWidth arch), Maybe String)
  #+END_SRC

  Take the implementation of ~disassembleBlockFromAbsState~ in ~Data.Macaw.X86~.
  Note that we can ignore the ~AbsBlockState~ parameter, which is only used for
  x86.  We also don't need to implement the entire function.  We can start by
  focusing on the equivalent of the ~execInstruction~ function.  The surrounding
  code we can most likely adapt without many changes.

  The ~execInstruction~ function is defined in ~Data.Macaw.X86.Semantics~.  The
  signature of this function is more interesting than its implementation:

  #+BEGIN_SRC haskell
    execInstruction :: FullSemantics m
                    => Value m (BVType 64)
                       -- ^ Next ip address
                    -> F.InstructionInstance
                    -> Maybe (m ())
  #+END_SRC

  This signature is more general than necessary: we can concretize the typeclass
  constraint to a concrete ~Monad~ in the style of the ~X86Generator~ Monad.  We
  should create a simple Monad based on the ~State~ Monad from /mtl/ and provide
  some functions on it that mirror those of the ~Semantics~ typeclass from
 /macaw-x86/. An example Monad declaration might be:

  #+BEGIN_SRC haskell
    {-# LANGUAGE GeneralizedNewtypeDeriving #-}
    import           Control.Monad.ST ( ST )
    import qualified Control.Monad.State.Strict as St
    data PreBlock ids = PreBlock { pBlockIndex :: !Word64
                                 , pBlockAddr  :: !(MemSegmentOff 64)
                                   -- ^ Starting address of function in preblock.
                                 , pBlockStmts :: !(Seq (Stmt X86_64 ids))
                                 , pBlockState :: !(RegState X86Reg (Value X86_64 ids))
                                 , pBlockApps  :: !(MapF (App (Value X86_64 ids)) (Assignment X86_64 ids))
                                 }
    data GenState w s ids = GenState { assignIdGen :: !(NonceGenerator (ST s) ids)
                                     , blockSeq :: !(BlockSeq ids)
                                     , blockState :: !(PreBlock ids)
                                     , genAddr :: !(MemSegmentOff w)
                                     }
    newtype MCGenerator w s ids a = MCGenerator { runGen :: St.StateT (GenState w s ids) (ST s) a }
                                  deriving (Monad,
                                            Functor,
                                            Applicative,
                                            St.MonadState (GenState w s ids))
  #+END_SRC

  The ~PreBlock~ type is the key: it is the block *currently* being constructed
  (at any given time).  It has a ~RegState~, which is one of the key things we
  will be modifying.  Many of the combinators relating to the ~X86Generator~ in
 /macaw-x86/ are defined in service of updating this state as machine code
  instructions are encountered.  It is a ~PreBlock~ because it isn't yet a
  block.  It becomes a block once we encounter a terminator instruction (e.g., a
  jump of some kind).  At that point, we add it to the underlying collection of
  blocks.

  We will need many of the helpers in the ~Data.Macaw.X86~ module that operate
  on the ~X86Generator~ Monad.  It may also be helpful to have an additional
  component to the Monad to signal errors (e.g, ~Control.Monad.Except.ExceptT~).
  We need the base of the Monad transformer stack to be ~ST~ so that we can
  allocate nonces.

  Since we are specializing our ~execInstruction~ to this Monad, its type will
  look something like:

  #+BEGIN_SRC haskell
    execInstruction :: Value PPC.PPC ids (BVType w)
                       -- ^ Next ip address
                    -> PPC.Instruction
                    -- ^ An instruction from Dismantle
                    -> Maybe (MCGenerator w s ids ())
  #+END_SRC

  Think of this as the action that we take given an instruction and the value of
  the instruction pointer (IP) when that instruction is executed.  We pass in
  the instruction pointer to accommodate IP-relative addressing (i.e., addresses
  that are computed relative to the address of the instruction computing the
  address). ~execInstruction~ returns a ~Maybe~ in case the instruction is
  invalid.  That is not especially likely given our encoding, but it is possible.

  As an example of what an implementation of this function might look like is:

  #+BEGIN_SRC haskell
    execInstruction :: Value PPC.PPC ids (BVType w)
                       -- ^ Next ip address
                    -> PPC.Instruction
                    -- ^ An instruction from Dismantle
                    -> Maybe (MCGenerator w s ids ())
    execInstruction ip (PPC.Instruction opcode operands) =
      case opcode of
        PPC.ADD4 ->
          case operands of
            (r1 :> r2 :> r3 :> Nil) -> Just $ do
              v2 <- get r2
              v3 <- get r3
              define r1 (BVAdd v2 v3)

  #+END_SRC

  For appropriate definitions of ~get~ and ~define~, which read from and write
  to (respectively) the ~RegState~ in the ~PreBlock~ of the ~GenState~ in the
 ~MCGenerator~ Monad.
* Modules of note

  - macaw: ~Data.Macaw.Architecture.Info~

    This contains the machine-specific interface that must be implemented for
    each backend to /macaw/: ~ArchitectureInfo~.  There are many details, but
    the main workhorse is ~disassembleFn~, which disassembles bytes into blocks
    (sequences of statements with no branches).

  - macaw: ~Data.Macaw.CFG.Core~

    This defines some key types for the translation we will have to do:

    - ~Stmt~: statements that comprise basic blocks (a three-address code style
      representation).
    - ~Value~: Values that can live in registers or memory, represented using an
      expression language defined in /macaw/ (see ~App~ and ~Expr~).  Most
      values are bitvectors of various lengths.
    - ~ArchFn~, ~ArchReg~, ~ArchStmt~, which are for representing
      architecture-specific behavior that can't be represented with the ~Stmt~
      type.  These are type families that are instantiated for each backend.
    - ~RegState~, which is a map from registers to ~Value~.  The register type
      is a parameter and is architecture-specific (e.g., ~X86Reg~).  While this
      is basically a map (parameterized map from /parameterized-utils/), it has
      an additional invariant where it is always full (i.e., it has an entry for
      every register).


    Note that our goal is to translate machine instructions into one or more
 /macaw/ statements (the ~Stmt~ type).  We will arrange these statements into
    basic blocks (linear sequences of blocks with no branches).  The bridge
    between statements and the expression language is through the ~AssignStmt~
    constructor of ~Stmt~, which establishes an assignment (similarly the
 ~WriteMem~ statement).  An assignment defines a new virtual register in
 /macaw/ IR (via the ~Assignment~ type).  The ~Assignment~ names the virtual
    register it defines through the ~assignId~ field.  The ~assignRhs~ contains
    expressions through the ~EvalApp~ constructor (~App~ being the expression
    language).  The ~ReadMem~ constructor corresponds to reads from memory.

  - macaw: ~Data.Macaw.CFG.App~

    This module defines the expression language that is referenced by the
 ~Value~ type.

  - macaw-x86: ~Data.Macaw.X86~

    This module contains the /macaw/ backend for x86_64: ~x86_64_linux_info~.
    The most important function in this definition is probably
 ~disassembleBlockFromAbsState~, which disassembles instructions into basic
    blocks.

    This module also contains implementations of the two important interfaces in
 /macaw-x86/: ~Semantics~ and ~IsValue~.  We won't need the classes, but the
    underlying ~X86Generator~ Monad is instructive, as is the representation of
    expressions.

  - macaw-x86: ~Data.Macaw.X86.X86Reg~

    This module defines a representation of all of the parts of the machine
    state for X86.  Each backend will have something analogous.  Note that the
    definition of ~X86Reg~ is a GADT [fn:GADTs] (despite the unusual definition
    style).  This is important, as 1) /macaw/ expects the register type to have
    a type parameter, and 2) the extra size guarantees are somewhat useful.

    Note that the strange form of the declaration is most likely historical.
    Before GHC 8.2, haddock could not parse documentation comments on GADT
    constructors.

  - semmc: ~SemMC.Formula.Load~

    Load learned formulas from disk into a map from opcodes to formulas.

  - crucible: ~Lang.Crucible.Solver.SimpleBuilder~

    This module defines a different ~App~ type that is the expression language
    for our parameterized formulas (i.e., instruction semantics).  This is the
    AST we'll be walking in the Template Haskell code.  By and large, we only
    use the bitvector operations.  We also use a few uninterpreted functions to
    represent floating point operations.