ironbar/docs/Configuration guide.md

By default, you get a single bar at the bottom of all your screens. To change that, you'll unsurprisingly need a config file.

This page details putting together the skeleton for your config to get you to a stage where you can start configuring modules. It may look long and overwhelming, but that is just because the bar supports a lot of scenarios!

If you want to see some ready-to-go config files check the examples folder and the example pages in the sidebar.

1. Create config file

The config file lives inside the ironbar directory in your XDG_CONFIG_DIR, which is usually ~/.config/ironbar.

Ironbar supports a range of configuration formats, so you can pick your favourite:

• config.json
• config.toml
• config.yaml
• config.corn (Experimental, includes variable support for re-using blocks. See here for info)

You can also override the default config path using the IRONBAR_CONFIG environment variable.

2. Pick your use-case

Ironbar gives you a few ways to configure the bar to suit your needs. This allows you to keep your config simple and relatively flat if your use-case is simple, and make it more complex if required.

a) I want the same bar across all monitors

Place the bar config inside the top-level object. This is automatically applied to each of your monitors.

JSON

{
  "position": "bottom",
  "height": 42,
  "start": [],
  "center": [],
  "end": []
}

TOML

position = "bottom"
height = 42
start = []
center = []
end = []

YAML

position: "bottom"
height: 42
start: [ ]
center: [ ]
end: [ ]

Corn

{
  position = "bottom"
  height = 42
  start = []
  center = []
  end = []
}

b) I want my config to differ across one or more monitors

Create a map/object called monitors inside the top-level object. Each of the map's keys should be an output name, and each value should be an object containing the bar config.

To find your output names, run wayland-info | grep wl_output -A1.

JSON

{
  "monitors": {
    "DP-1": {
      "start": []
    },
    "DP-2": {
      "position": "bottom",
      "height": 30,
      "start": []
    }
  }
}

TOML

[monitors]

[monitors.DP-1]
start = []

[monitors.DP-2]
position = "bottom"
height = 30
start = []

YAML

monitors:
  DP-1:
    start: [ ]
  DP-2:
    position: "bottom"
    height: 30
    start: [ ]

Corn

{
  monitors.DP-1.start = []
  monitors.DP-2 = {
    position = "bottom"
    height = 30
    start = []
  }
}

c) I want one or more monitors to have multiple bars

Create a map/object called monitors inside the top-level object. Each of the map's keys should be an output name. If you want the screen to have multiple bars, use an array of bar config objects. If you want the screen to have a single bar, use an object.

To find your output names, run wayland-info | grep wl_output -A1.

JSON

{
  "monitors": {
    "DP-1": [
      {
        "start": []
      },
      {
        "position": "top",
        "start": []
      }
    ],
    "DP-2": {
      "position": "bottom",
      "height": 30,
      "start": []
    }
  }
}

TOML

[monitors]

[[monitors.DP-1]]
start = []

[[monitors.DP-2]]
position = "top"
start = []

[monitors.DP-2]
position = "bottom"
height = 30
start = []

YAML

monitors:
  DP-1:
    - start: [ ]
    - position: "top"
      start: [ ]
  DP-2:
    position: "bottom"
    height: 30
    start: [ ]

Corn

{
  monitors.DP-1 = [
    { start = [] }
    { position = "top" start = [] }
  ]
  monitors.DP-2 = {
    position = "bottom"
    height = 30
    start = []
  }
}

3. Write your bar config(s)

Once you have the basic config structure set up, it's time to actually configure your bar(s).

Check here for an example config file for a fully configured bar in each format.

3.1 Top-level options

The following table lists each of the top-level bar config options:

Name	Type	Default	Description
name	string	bar-<n>	A unique identifier for the bar, used for controlling it over IPC. If not set, uses a generated integer suffix.
position	top or bottom or left or right	bottom	The bar's position on screen.
anchor_to_edges	boolean	false	Whether to anchor the bar to the edges of the screen. Setting to false centres the bar.
height	integer	42	The bar's height in pixels.
popup_gap	integer	5	The gap between the bar and popup window.
margin.top	integer	0	The margin on the top of the bar
margin.bottom	integer	0	The margin on the bottom of the bar
margin.left	integer	0	The margin on the left of the bar
margin.right	integer	0	The margin on the right of the bar
icon_theme	string	null	Name of the GTK icon theme to use. Leave blank to use default.
ironvar_defaults	Map<string, string>	{}	Map of ironvar keys against their default values.
start_hidden	boolean	false, or true if autohide set	Whether the bar should be hidden when the application starts. Enabled by default when autohide is set.
autohide	integer	null	The duration in milliseconds before the bar is hidden after the cursor leaves. Leave unset to disable auto-hide behaviour.
start	Module[]	[]	Array of left or top modules.
center	Module[]	[]	Array of center modules.
end	Module[]	[]	Array of right or bottom modules.

3.2 Module-level options

The following table lists each of the module-level options that are present on all modules. For details on available modules and each of their config options, check the sidebar.

For information on the Script type, and embedding scripts in strings, see here.

Events

Name	Type	Default	Description
on_click_left	Script [oneshot]	null	Runs the script when the module is left clicked.
on_click_middle	Script [oneshot]	null	Runs the script when the module is middle clicked.
on_click_right	Script [oneshot]	null	Runs the script when the module is right clicked.
on_scroll_up	Script [oneshot]	null	Runs the script when the module is scroll up on.
on_scroll_down	Script [oneshot]	null	Runs the script when the module is scrolled down on.
on_mouse_enter	Script [oneshot]	null	Runs the script when the module is hovered over.
on_mouse_exit	Script [oneshot]	null	Runs the script when the module is no longer hovered over.

Visibility

Name	Type	Default	Description
show_if	Dynamic Boolean	null	Polls the script to check its exit code. If exit code is zero, the module is shown. For other codes, it is hidden.
transition_type	slide_start or slide_end or crossfade or none	slide_start	The transition animation to use when showing/hiding the widget.
transition_duration	integer	250	The length of the transition animation to use when showing/hiding the widget.

Appearance

Name	Type	Default	Description
tooltip	string	null	Shows this text on hover. Supports embedding scripts between {{double braces}}.
name	string	null	Sets the unique widget name, allowing you to style it using #name.
class	string	null	Sets one or more CSS classes, allowing you to style it using .class.

For more information on styling, please see the styling guide.