LadybirdBrowser/ladybird
1
1
Fork 0
mirror of https://github.com/LadybirdBrowser/ladybird.git synced 2024-11-10 13:00:29 +03:00
Code Issues Packages Projects Releases Wiki Activity
9a827ad3da
ladybird/CMakeLists.txt

271 lines
10 KiB
CMake
Raw Normal View History

Build: Allow using CMake 3.16 Because apparently that's what a lot of people have, and they report it works fine.
2020-05-15 10:52:37 +03:00
cmake_minimum_required(VERSION 3.16)
project(SerenityOS C CXX ASM)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
cmake: Make setting CMAKE_BUILD_TYPE an error. I tried setting it to Release, then noticed that it didn't build due to gcc's optimizer-level dependent warnings and -Werror, then started fixing the warnings for a bit (all false positives), then looked at the global CMakeLists.txt and realized that the default build is aleady using compiler optimizations. It looks like people aren't supposed to change this, so make that explicit to be friendly to people familiar with cmake but new to serenity.
2020-06-06 04:23:31 +03:00
if(NOT "${CMAKE_BUILD_TYPE}" STREQUAL "")
CMake: Fix message levels for error conditions during configuration Make messages which should be fatal, actually fail the build. - FATAL is not a valid mode keyword. The full list is available in the docs: https://cmake.org/cmake/help/v3.19/command/message.html - SEND_ERROR doesn't immediately stop processing, FATAL_ERROR does. We should immediately stop if the Toolchain is not present. - The app icon size validation was just a WARNING that is easy to overlook. We should promote it to a FATAL_ERROR so that people will not overlook the issue when adding a new application. We can only make the small icon message FATAL_ERROR, as there is currently one violation of the medium app icon validation.
2021-05-13 14:15:35 +03:00
message(FATAL_ERROR
cmake: Make setting CMAKE_BUILD_TYPE an error. I tried setting it to Release, then noticed that it didn't build due to gcc's optimizer-level dependent warnings and -Werror, then started fixing the warnings for a bit (all false positives), then looked at the global CMakeLists.txt and realized that the default build is aleady using compiler optimizations. It looks like people aren't supposed to change this, so make that explicit to be friendly to people familiar with cmake but new to serenity.
2020-06-06 04:23:31 +03:00
": Don't use CMAKE_BUILD_TYPE when building serenity.\n"
"The default build type is optimized with debug info and asserts enabled,\n"
"and that's all there is.")
endif()
CMake: Make the install step more zen The "Installing $foo..." messages are just noise, so turn them off.
2020-06-19 17:52:39 +03:00
set(CMAKE_INSTALL_MESSAGE NEVER)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
enable_testing()
CMake: compile_commands.json output Problem: - CMake is not outputting `compile_commands.json`. - `compile_commands.json` is used by build integration tooling such as `clang-tidy`. Solution: - Enable `CMAKE_EXPORT_COMPILE_COMMANDS` option so that the file is output.
2020-11-12 01:59:06 +03:00
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
Build: Support non-i686 toolchains * Add SERENITY_ARCH option to CMake for selecting the target toolchain * Port all build scripts but continue to use i686 * Update GitHub Actions cache to include BuildIt.sh
2020-12-29 06:38:52 +03:00
set(SERENITY_ARCH "i686" CACHE STRING "Target architecture for SerenityOS.")
CMake: Add public cmake option to document ENABLE_ALL_THE_DEBUG_MACROS - Making this an option makes this option visible to users and tooling. - Rename `ALL_THE_DEBUG_MACROS` -> `ENABLE_ALL_THE_DEBUG_MACROS`.
2021-01-01 13:26:52 +03:00
# Central location for all custom options used in the Serenity build.
AK: Rename {DBGLN_NO => ENABLE}_COMPILETIME_FORMAT_CHECK This is no longer limited to dbgln(). Also invert it to match all the other ENABLE_FOO options.
2021-02-23 20:14:04 +03:00
option(ENABLE_ADDRESS_SANITIZER "Enable address sanitizer testing in gcc/clang" OFF)
option(ENABLE_KERNEL_ADDRESS_SANITIZER "Enable kernel address sanitizer testing in gcc/clang" OFF)
option(ENABLE_MEMORY_SANITIZER "Enable memory sanitizer testing in gcc/clang" OFF)
option(ENABLE_UNDEFINED_SANITIZER "Enable undefined behavior sanitizer testing in gcc/clang" OFF)
option(ENABLE_FUZZER_SANITIZER "Enable fuzzer sanitizer testing in clang" OFF)
Kernel: Add ENABLE_EXTRA_KERNEL_DEBUG_SYMBOLS option to set Og and ggdb3 When debugging kernel code, it's necessary to set extra flags. Normal advice is to set -ggdb3. Sometimes that still doesn't provide enough debugging information for complex functions that still get optimized. Compiling with -Og gives the best optimizations for debugging, but can sometimes be broken by changes that are innocuous when the compiler gets more of a chance to look at them. The new CMake option enables both compile options for kernel code.
2021-05-23 23:20:22 +03:00
option(ENABLE_EXTRA_KERNEL_DEBUG_SYMBOLS "Enable -Og and -ggdb3 options for Kernel code for easier debugging" OFF)
AK: Rename {DBGLN_NO => ENABLE}_COMPILETIME_FORMAT_CHECK This is no longer limited to dbgln(). Also invert it to match all the other ENABLE_FOO options.
2021-02-23 20:14:04 +03:00
option(ENABLE_ALL_THE_DEBUG_MACROS "Enable all debug macros to validate they still compile" OFF)
Meta/CI: Add ENABLE_ALL_DEBUG_FACILITIES CMake option This option replaces the use of ENABLE_ALL_THE_DEBUG_MACROS in CI runs, and enables all debug options that might be broken by developers unintentionally that are only used in specific debugging situations.
2021-05-24 00:33:52 +03:00
option(ENABLE_ALL_DEBUG_FACILITIES "Enable all noisy debug symbols and options. Not recommended for normal developer use" OFF)
Build: Add ENABLE_PCI_IDS_DOWNLOAD CMake option This allows disabling the download of the pci.ids database at build time. Addresses concerns raised in #5410.
2021-03-04 01:29:37 +03:00
option(ENABLE_COMPILETIME_FORMAT_CHECK "Enable compiletime format string checks" ON)
option(ENABLE_PCI_IDS_DOWNLOAD "Enable download of the pci.ids database at build time" ON)
AK: Rename {DBGLN_NO => ENABLE}_COMPILETIME_FORMAT_CHECK This is no longer limited to dbgln(). Also invert it to match all the other ENABLE_FOO options.
2021-02-23 20:14:04 +03:00
option(BUILD_LAGOM "Build parts of the system targeting the host OS for fuzzing/testing" OFF)
Kernel: Add a CMake flag to enable LTO for the kernel
2021-04-29 16:25:31 +03:00
option(ENABLE_KERNEL_LTO "Build the kernel with link-time optimization" OFF)
Meta: Run the Wasm spec tests in CI Since LibWasm is still not capable of passing all of the spec tests, ignore failing tests, only fail the build if some segfault/abort/etc occurs.
2021-05-26 21:34:52 +03:00
include(Meta/CMake/wasm_spec_tests.cmake)
CMake: Consolidate all options to the root of the project
2021-01-01 13:19:48 +03:00
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
add_custom_target(run
COMMAND ${CMAKE_SOURCE_DIR}/Meta/run.sh
USES_TERMINAL
)
CMake: Add 'setup-and-run' target to perform all prereqs and run the image Running 'ninja install && ninja image && ninja run` is kind of annoying. I got tired, and came up with this instead, which does the right thing and I don't have to type out the incantation.
2021-02-15 02:59:20 +03:00
# This can currently only be implemented by ordered commands
# as cmake doesn't support inter dependency ordering, and we
# would like to avoid inject dependencies on the existing
# custom commands to allow people to run commands adhoc with
# out forcing re-builds when they might not want them.
add_custom_target(setup-and-run
COMMAND ${CMAKE_MAKE_PROGRAM} install
COMMAND ${CMAKE_MAKE_PROGRAM} image
COMMAND ${CMAKE_MAKE_PROGRAM} run
USES_TERMINAL
)
Build: rename `image` target => `qemu-image` Also add a new `image` target which is just an alias to `qemu-image`. This makes the CMakeLists.txt file more readable in my opinion.
2020-06-20 04:04:42 +03:00
add_custom_target(image
DEPENDS qemu-image
)
add_custom_target(qemu-image
Everywhere: Replace SERENITY_ROOT with SERENITY_SOURCE_DIR
2021-04-20 03:51:04 +03:00
COMMAND ${CMAKE_COMMAND} -E env "SERENITY_SOURCE_DIR=${CMAKE_SOURCE_DIR}" "SERENITY_ARCH=${SERENITY_ARCH}" ${CMAKE_SOURCE_DIR}/Meta/build-image-qemu.sh
Build: rename `image` target => `qemu-image` Also add a new `image` target which is just an alias to `qemu-image`. This makes the CMakeLists.txt file more readable in my opinion.
2020-06-20 04:04:42 +03:00
BYPRODUCTS ${CMAKE_BINARY_DIR}/_disk_image
USES_TERMINAL
)
Build: Add grub-image target to CMake
2020-05-27 00:51:18 +03:00
add_custom_target(grub-image
Everywhere: Replace SERENITY_ROOT with SERENITY_SOURCE_DIR
2021-04-20 03:51:04 +03:00
COMMAND ${CMAKE_COMMAND} -E env "SERENITY_SOURCE_DIR=${CMAKE_SOURCE_DIR}" "SERENITY_ARCH=${SERENITY_ARCH}" ${CMAKE_SOURCE_DIR}/Meta/build-image-grub.sh
Build: Use a separate byproduct name for the GRUB disk image (#2424) The grub-image target no longer conflicts with normal image target. This unbreaks using CMake with Ninja. Fixes #2423.
2020-05-28 11:08:38 +03:00
BYPRODUCTS ${CMAKE_BINARY_DIR}/grub_disk_image
Build: Add grub-image target to CMake
2020-05-27 00:51:18 +03:00
USES_TERMINAL
)
Build: Add extlinux-image target to CMake
2021-05-08 14:02:36 +03:00
add_custom_target(extlinux-image
COMMAND ${CMAKE_COMMAND} -E env "SERENITY_SOURCE_DIR=${CMAKE_SOURCE_DIR}" "SERENITY_ARCH=${SERENITY_ARCH}" ${CMAKE_SOURCE_DIR}/Meta/build-image-extlinux.sh
BYPRODUCTS ${CMAKE_BINARY_DIR}/extlinux_disk_image
USES_TERMINAL
)
Build: Add grub-image target to CMake
2020-05-27 00:51:18 +03:00
CMake: Add convenience targets to run lint-shell-scripts and check-style
2020-05-28 22:06:44 +03:00
add_custom_target(lint-shell-scripts
COMMAND ${CMAKE_SOURCE_DIR}/Meta/lint-shell-scripts.sh
USES_TERMINAL
)
add_custom_target(check-style
COMMAND ${CMAKE_SOURCE_DIR}/Meta/check-style.sh
USES_TERMINAL
)
Meta: Add install-ports CMake target install-ports copys the necessary files from Ports/ to /usr/Ports. Also refactor the compiler and destiation variables from .port_include.sh into .hosted_defs.sh. .hosted_defs.sh does not exists when ports are built in serenity
2021-04-03 06:53:41 +03:00
add_custom_target(install-ports
Everywhere: Replace SERENITY_ROOT with SERENITY_SOURCE_DIR
2021-04-20 03:51:04 +03:00
COMMAND ${CMAKE_COMMAND} -E env "SERENITY_SOURCE_DIR=${CMAKE_SOURCE_DIR}" "SERENITY_ARCH=${SERENITY_ARCH}" ${CMAKE_SOURCE_DIR}/Meta/install-ports-tree.sh
Meta: Add install-ports CMake target install-ports copys the necessary files from Ports/ to /usr/Ports. Also refactor the compiler and destiation variables from .port_include.sh into .hosted_defs.sh. .hosted_defs.sh does not exists when ports are built in serenity
2021-04-03 06:53:41 +03:00
USES_TERMINAL
)
CMake: Set C++20 mode in canonical cmake Problem: - Setting `CMAKE_CXX_FLAGS` directly to effect the version of the C++ standard being used is no longer the recommended best practice. Solution: - Set C++20 mode in the compiler by setting `CMAKE_CXX_STANDARD`. - Force the build system generator not to fallback to the latest standard supported by the compiler by enabling `CMAKE_CXX_STANDARD_REQUIRED`. This shouldn't ever be a problem though since the toolchain is tightly controlled. - Disable GNU compiler extensions by disabling `CMAKE_CXX_EXTENSIONS` to preserve the previous flags.
2020-12-22 03:47:47 +03:00
set(CMAKE_CXX_STANDARD 20)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
set(CMAKE_CXX_EXTENSIONS OFF)
CMake: Quiet warnings about literal suffix Problem: - Newer versions of clang (ToT) have a similar `-Wliteral-suffix` warning as GCC. A previous commit enabled it for all compilers. This needs to be silenced for the entire build, but it currently only is silenced for some directories. Solution: - Move the `-Wno-literal-suffix` option up in the CMakeLists.txt so that it gets applied everywhere.
2021-04-19 00:35:58 +03:00
add_compile_options(-Wno-literal-suffix)
cmake: Hotfix the broken build This regressed in #6000 and started complaining about bad literal suffixes, so here's a quick and dirty partial revert to make things build again.
2021-03-28 22:32:28 +03:00
if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
CMake: Remove redundancies and support clang ToT Problem: - There are redundant options being set for some directories. - Clang ToT fails to compile the project. Solution: - Remove redundancies. - Fix clang error list.
2021-04-18 19:50:53 +03:00
add_compile_options(-fconcepts)
CMake: Fix building with AppleClang compiler
2021-04-30 06:04:59 +03:00
elseif ("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang$")
cmake: Hotfix the broken build This regressed in #6000 and started complaining about bad literal suffixes, so here's a quick and dirty partial revert to make things build again.
2021-03-28 22:32:28 +03:00
add_compile_options(-Wno-overloaded-virtual -Wno-user-defined-literals)
endif()
Meta/CI: Add ENABLE_ALL_DEBUG_FACILITIES CMake option This option replaces the use of ENABLE_ALL_THE_DEBUG_MACROS in CI runs, and enables all debug options that might be broken by developers unintentionally that are only used in specific debugging situations.
2021-05-24 00:33:52 +03:00
if (ENABLE_ALL_DEBUG_FACILITIES)
set(ENABLE_ALL_THE_DEBUG_MACROS ON)
set(ENABLE_EXTRA_KERNEL_DEBUG_SYMBOLS ON)
endif()
CMake: Add public cmake option to document ENABLE_ALL_THE_DEBUG_MACROS - Making this an option makes this option visible to users and tooling. - Rename `ALL_THE_DEBUG_MACROS` -> `ENABLE_ALL_THE_DEBUG_MACROS`.
2021-01-01 13:26:52 +03:00
if (ENABLE_ALL_THE_DEBUG_MACROS)
CMake: Decouple cmake utility functions from top-level CMakeLists.txt Problem: - These utility functions are only used in `AK`, but are being defined in the top-level. This clutters the top-level. Solution: - Move the utility functions to `Meta/CMake/utils.cmake` and include where needed. - Also, move `all_the_debug_macros.cmake` into `Meta/CMake` directory to consolidate the location of `*.cmake` script files.
2020-12-23 20:07:22 +03:00
include(${CMAKE_SOURCE_DIR}/Meta/CMake/all_the_debug_macros.cmake)
CMake: Add public cmake option to document ENABLE_ALL_THE_DEBUG_MACROS - Making this an option makes this option visible to users and tooling. - Rename `ALL_THE_DEBUG_MACROS` -> `ENABLE_ALL_THE_DEBUG_MACROS`.
2021-01-01 13:26:52 +03:00
endif(ENABLE_ALL_THE_DEBUG_MACROS)
Meta: Provide option to build with ALL debug macros
2020-08-27 01:59:36 +03:00
Everywhere: Use CMake to generate AK/Debug.h. This was done with the help of several scripts, I dump them here to easily find them later: awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in) do find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \; done # Remember to remove WRAPPER_GERNERATOR_DEBUG from the list. awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
2021-01-24 01:29:11 +03:00
configure_file(AK/Debug.h.in AK/Debug.h @ONLY)
Meta: Split debug defines into multiple headers. The following script was used to make these changes: #!/bin/bash set -e tmp=$(mktemp -d) echo "tmp=$tmp" find Kernel \( -name '*.cpp' -o -name '*.h' \) | sort > $tmp/Kernel.files find . \( -path ./Toolchain -prune -o -path ./Build -prune -o -path ./Kernel -prune \) -o \( -name '*.cpp' -o -name '*.h' \) -print | sort > $tmp/EverythingExceptKernel.files cat $tmp/Kernel.files | xargs grep -Eho '[A-Z0-9_]+_DEBUG' | sort | uniq > $tmp/Kernel.macros cat $tmp/EverythingExceptKernel.files | xargs grep -Eho '[A-Z0-9_]+_DEBUG' | sort | uniq > $tmp/EverythingExceptKernel.macros comm -23 $tmp/Kernel.macros $tmp/EverythingExceptKernel.macros > $tmp/Kernel.unique comm -1 $tmp/Kernel.macros $tmp/EverythingExceptKernel.macros > $tmp/EverythingExceptKernel.unique cat $tmp/Kernel.unique | awk '{ print "#cmakedefine01 "$1 }' > $tmp/Kernel.header cat $tmp/EverythingExceptKernel.unique | awk '{ print "#cmakedefine01 "$1 }' > $tmp/EverythingExceptKernel.header for macro in $(cat $tmp/Kernel.unique) do cat $tmp/Kernel.files | xargs grep -l $macro >> $tmp/Kernel.new-includes ||: done cat $tmp/Kernel.new-includes | sort > $tmp/Kernel.new-includes.sorted for macro in $(cat $tmp/EverythingExceptKernel.unique) do cat $tmp/Kernel.files | xargs grep -l $macro >> $tmp/Kernel.old-includes ||: done cat $tmp/Kernel.old-includes | sort > $tmp/Kernel.old-includes.sorted comm -23 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.new comm -13 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.old comm -12 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.mixed for file in $(cat $tmp/Kernel.includes.new) do sed -i -E 's/#include <AK\/Debug\.h>/#include <Kernel\/Debug\.h>/' $file done for file in $(cat $tmp/Kernel.includes.mixed) do echo "mixed include in $file, requires manual editing." done
2021-01-25 18:07:10 +03:00
configure_file(Kernel/Debug.h.in Kernel/Debug.h @ONLY)
Everywhere: Use CMake to generate AK/Debug.h. This was done with the help of several scripts, I dump them here to easily find them later: awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in) do find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \; done # Remember to remove WRAPPER_GERNERATOR_DEBUG from the list. awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
2021-01-24 01:29:11 +03:00
Libraries: Move to Userland/Libraries/
2021-01-12 14:17:30 +03:00
include_directories(Userland/Libraries)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
include_directories(.)
Everywhere: Use CMake to generate AK/Debug.h. This was done with the help of several scripts, I dump them here to easily find them later: awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in) do find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \; done # Remember to remove WRAPPER_GERNERATOR_DEBUG from the list. awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
2021-01-24 01:29:11 +03:00
include_directories(${CMAKE_BINARY_DIR})
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
add_subdirectory(Meta/Lagom)
Userland: Port UBSAN implementation to userspace Take Kernel/UBSanitizer.cpp and make a copy in LibSanitizer. We can use LibSanitizer to hold other sanitizers as people implement them :^). To enable UBSAN for LibC, DynamicLoader, and other low level system libraries, LibUBSanitizer is built as a serenity_libc, and has a static version for LibCStatic to use. The approach is the same as that taken in Note that this means now UBSAN is enabled for code generators, Lagom, Kernel, and Userspace with -DENABLE_UNDEFINED_SANTIZER=ON. In userspace however, UBSAN is not deadly (yet). Co-authored-by: ForLoveOfCats <ForLoveOfCats@vivaldi.net>
2021-05-24 04:40:22 +03:00
if (ENABLE_UNDEFINED_SANITIZER)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fsanitize=undefined")
endif()
DevTools: Move to Userland/DevTools/
2021-01-12 14:18:55 +03:00
add_subdirectory(Userland/DevTools/IPCCompiler)
DevTools: Add StateMachineGenerator utility This program turns a description of a state machine that takes its input byte-by-byte into C++ code. The state machine is described in a custom format as specified below: ``` // Comments are started by two slashes, and cause the rest of the line // to be ignored @name ExampleStateMachine // sets the name of the generated class @namespace Test // sets the namespace (optional) @begin Begin // sets the state the parser will start in // The rest of the file contains one or more states and an optional // @anywhere directive. Each of these is a curly bracket delimited set // of state transitions. State transitions contain a selector, the // literal "=>" and a (new_state, action) tuple. Examples: // 0x0a => (Begin, PrintLine) // [0x00..0x1f] => (_, Warn) // '_' means no change // [0x41..0x5a] => (BeginWord, _) // '_' means no action // Rules common to all states. These take precedence over rules in the // specific states. @anywhere { 0x0a => (Begin, PrintLine) [0x00..0x1f] => (_, Warn) } Begin { [0x41..0x5a] => (Word, _) [0x61..0x7a] => (Word, _) // For missing values, the transition (_, _) is implied } Word { // The entry action is run when we transition to this state from a // *different* state. @anywhere can't have this @entry IncreaseWordCount 0x09 => (Begin, _) 0x20 => (Begin, _) // The exit action is run before we transition to any *other* state // from here. @anywhere can't have this @exit EndOfWord } ``` The generated code consists of a single class which takes a `Function<Action, u8>` as a parameter in its constructor. This gets called whenever an action is to be done. This is because some input might not produce an action, but others might produce up to 3 (exit, state transition, entry). The actions allow us to build a more advanced parser over the simple state machine. The sole public method, `void advance(u8)`, handles the input byte-by-byte, managing the state changes and requesting the appropriate Action from the handler. Internally, the state transitions are resolved via a lookup table. This is a bit wasteful for more complex state machines, therefore the generator is designed to be easily extendable with a switch-based resolver; only the private `lookup_state_transition` method needs to be re-implemented. My goal for this tool is to use it for implementing a standard-compliant ANSI escape sequence parser for LibVT, as described on <https://vt100.net/emu/dec_ansi_parser>
2021-05-08 10:53:49 +03:00
add_subdirectory(Userland/DevTools/StateMachineGenerator)
Libraries: Move to Userland/Libraries/
2021-01-12 14:17:30 +03:00
add_subdirectory(Userland/Libraries/LibWeb/CodeGenerators)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
Build: Support make's and ninja's restat optimization After running a build command, make by default stat()s the command's output, and if it wasn't touched, then it cancels all build steps that were scheduled only because this command was expected to change the output. Ninja has the same feature, but it's opt-in behind the per-command "restat = 1" setting. However, CMake enables it by default for all custom commands. Use Meta/write-only-on-difference.sh to write the output to a temporary file, and then copy the temporary file only to the final location if the contents of the output have changed since last time. write-only-on-difference.sh automatically creates the output's parent directory, so stop doing that in CMake. Reduces the number of build steps that run after touching a file in LibCore from 522 to 312. Since we now no longer trigger the CMake special case "If COMMAND specifies an executable target name (created by the add_executable() command), it will automatically be replaced by the location of the executable created at build time", we now need to use qualified paths to the generators. Somewhat related to #2877.
2020-08-02 16:54:06 +03:00
set(write_if_different ${CMAKE_SOURCE_DIR}/Meta/write-only-on-difference.sh)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
find_program(CCACHE_PROGRAM ccache)
if(CCACHE_PROGRAM)
set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_PROGRAM}")
endif()
unset(CMAKE_SYSROOT)
set(CMAKE_STAGING_PREFIX ${CMAKE_BINARY_DIR}/Root)
set(CMAKE_INSTALL_PREFIX ${CMAKE_BINARY_DIR}/Root)
set(CMAKE_INSTALL_DATAROOTDIR ${CMAKE_BINARY_DIR}/Root/res)
Toolchain+Ports: Update GCC to version 11.1.0
2021-04-22 17:38:20 +03:00
set(GCC_VERSION 11.1.0)
Meta: Make it possible to (somewhat) build the system inside Serenity This removes some hard references to the toolchain, some unnecessary uses of an external install command, and disables a -Werror flag (for the time being) - only if run inside serenity. With this, we can build and link the kernel :^)
2021-02-15 00:49:25 +03:00
if (${CMAKE_HOST_SYSTEM_NAME} MATCHES SerenityOS)
message("Good job on building cmake!")
else()
Build: Use variables when concatenating Toolchain paths. Make this stuff a bit easier to maintain by using the root level variables to build up the Toolchain paths. Also leave a note for future editors of BuildIt.sh to give them warning about the other changes they'll need to make.
2021-04-27 10:25:02 +03:00
set(TOOLCHAIN_ROOT ${CMAKE_SOURCE_DIR}/Toolchain/Local/${SERENITY_ARCH}/)
set(TOOLCHAIN_PATH ${TOOLCHAIN_ROOT}/bin)
Meta: Make it possible to (somewhat) build the system inside Serenity This removes some hard references to the toolchain, some unnecessary uses of an external install command, and disables a -Werror flag (for the time being) - only if run inside serenity. With this, we can build and link the kernel :^)
2021-02-15 00:49:25 +03:00
set(TOOLCHAIN_PREFIX ${TOOLCHAIN_PATH}/${SERENITY_ARCH}-pc-serenity-)
set(CMAKE_C_COMPILER ${TOOLCHAIN_PREFIX}gcc)
set(CMAKE_CXX_COMPILER ${TOOLCHAIN_PREFIX}g++)
set(CMAKE_ASM_COMPILER ${TOOLCHAIN_PREFIX}gcc)
set(CMAKE_LINKER ${TOOLCHAIN_PREFIX}ld)
Kernel: Add a CMake flag to enable LTO for the kernel
2021-04-29 16:25:31 +03:00
set(CMAKE_RANLIB ${TOOLCHAIN_PREFIX}gcc-ranlib)
Meta: Make it possible to (somewhat) build the system inside Serenity This removes some hard references to the toolchain, some unnecessary uses of an external install command, and disables a -Werror flag (for the time being) - only if run inside serenity. With this, we can build and link the kernel :^)
2021-02-15 00:49:25 +03:00
set(CMAKE_STRIP ${TOOLCHAIN_PREFIX}strip)
Kernel: Add a CMake flag to enable LTO for the kernel
2021-04-29 16:25:31 +03:00
set(CMAKE_AR ${TOOLCHAIN_PREFIX}gcc-ar)
Meta: Make it possible to (somewhat) build the system inside Serenity This removes some hard references to the toolchain, some unnecessary uses of an external install command, and disables a -Werror flag (for the time being) - only if run inside serenity. With this, we can build and link the kernel :^)
2021-02-15 00:49:25 +03:00
endif()
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
Toolchain: Allow building using CMake on macOS
2020-07-09 00:57:51 +03:00
foreach(lang ASM C CXX OBJC OBJCXX)
unset(CMAKE_${lang}_OSX_COMPATIBILITY_VERSION_FLAG)
unset(CMAKE_${lang}_OSX_CURRENT_VERSION_FLAG)
unset(CMAKE_${lang}_LINK_FLAGS)
unset(CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS)
unset(CMAKE_SHARED_MODULE_CREATE_${lang}_FLAGS)
unset(CMAKE_SHARED_MODULE_LOADER_${lang}_FLAG )
unset(CMAKE_${lang}_OSX_DEPLOYMENT_TARGET_FLAG)
unset(CMAKE_${lang}_SYSROOT_FLAG)
CMake: Only enable "MacOS workaround" on MacOS This was preventing ports from building on Linux.
2021-01-07 13:39:24 +03:00
if (CMAKE_SYSTEM_NAME MATCHES Darwin)
CMake: Fix building libraries on macOS When building libraries on macOS they'd be missing the SONAME attribute which causes the linker to embed relative paths into other libraries and executables: Dynamic section at offset 0x52794 contains 28 entries: Type Name/Value (NEEDED) Shared library: [libgcc_s.so] (NEEDED) Shared library: [Userland/Libraries/LibCrypt/libcrypt.so] (NEEDED) Shared library: [Userland/Libraries/LibCrypto/libcrypto.so] (NEEDED) Shared library: [Userland/Libraries/LibC/libc.so] (NEEDED) Shared library: [libsystem.so] (NEEDED) Shared library: [libm.so] (NEEDED) Shared library: [libc.so] The dynamic linker then fails to load those libraries which makes the system unbootable.
2021-04-29 23:58:05 +03:00
## macOS workaround. Use GNU ld flags for SONAMEs.
CMake: Only enable "MacOS workaround" on MacOS This was preventing ports from building on Linux.
2021-01-07 13:39:24 +03:00
set(CMAKE_${lang}_CREATE_SHARED_LIBRARY
CMake: Fix building libraries on macOS When building libraries on macOS they'd be missing the SONAME attribute which causes the linker to embed relative paths into other libraries and executables: Dynamic section at offset 0x52794 contains 28 entries: Type Name/Value (NEEDED) Shared library: [libgcc_s.so] (NEEDED) Shared library: [Userland/Libraries/LibCrypt/libcrypt.so] (NEEDED) Shared library: [Userland/Libraries/LibCrypto/libcrypto.so] (NEEDED) Shared library: [Userland/Libraries/LibC/libc.so] (NEEDED) Shared library: [libsystem.so] (NEEDED) Shared library: [libm.so] (NEEDED) Shared library: [libc.so] The dynamic linker then fails to load those libraries which makes the system unbootable.
2021-04-29 23:58:05 +03:00
"<CMAKE_${lang}_COMPILER> <LANGUAGE_COMPILE_FLAGS> <CMAKE_SHARED_LIBRARY_CREATE_${lang}_FLAGS> <LINK_FLAGS> <SONAME_FLAG><TARGET_SONAME> -o <TARGET> <OBJECTS> <LINK_LIBRARIES>")
set(CMAKE_SHARED_LIBRARY_SONAME_${lang}_FLAG "-Wl,-soname,")
CMake: Only enable "MacOS workaround" on MacOS This was preventing ports from building on Linux.
2021-01-07 13:39:24 +03:00
endif()
Toolchain: Allow building using CMake on macOS
2020-07-09 00:57:51 +03:00
endforeach()
Meta: Disable rpath generation for MacOS
2020-12-28 02:04:29 +03:00
set(CMAKE_INSTALL_NAME_TOOL "")
Toolchain: Allow building using CMake on macOS
2020-07-09 00:57:51 +03:00
set(CMAKE_SHARED_LIBRARY_SUFFIX ".so")
Build: Enable --noexecstack Build ELF executables with a zero length `GNU_STACK` program header flagged non-executable. The stack is never executable on SerenityOS regardless of whether the `GNU_STACK` header is specified. Specifically defining this header is more explicit, as absence of this header implies an executable stack on other systems (Linux).
2021-03-19 08:47:23 +03:00
set(CMAKE_SHARED_LIBRARY_CREATE_CXX_FLAGS "-shared -Wl,--hash-style=gnu,-z,relro,-z,now,-z,noexecstack")
set(CMAKE_CXX_LINK_FLAGS "-Wl,--hash-style=gnu,-z,relro,-z,now,-z,noexecstack")
Toolchain: Allow building using CMake on macOS
2020-07-09 00:57:51 +03:00
CMake: set CMAKE_SKIP_RPATH everywhere Else, there's tons of "-- Set runtime path of" spam at build time, with apparently no way of disabling the build noise other than turning of rpaths. If the dynamic loader uses them at some point, we probably want to set them through cflags/ldflags instead of through cmake's built-in thing anyways, for that reason.
2021-01-07 02:55:01 +03:00
# We disable it completely because it makes cmake very spammy.
Meta: Disable rpath generation for MacOS
2020-12-28 02:04:29 +03:00
# This will need to be revisited when the Loader supports RPATH/RUN_PATH.
CMake: set CMAKE_SKIP_RPATH everywhere Else, there's tons of "-- Set runtime path of" spam at build time, with apparently no way of disabling the build noise other than turning of rpaths. If the dynamic loader uses them at some point, we probably want to set them through cflags/ldflags instead of through cmake's built-in thing anyways, for that reason.
2021-01-07 02:55:01 +03:00
set(CMAKE_SKIP_RPATH TRUE)
Meta: Disable rpath generation for MacOS
2020-12-28 02:04:29 +03:00
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wformat=2)
add_compile_options(-fdiagnostics-color=always)
if (NOT ${CMAKE_HOST_SYSTEM_NAME} MATCHES SerenityOS)
cmake: Group compile options together.
2021-03-28 17:43:05 +03:00
# FIXME: Something makes this go crazy and flag unused variables that aren't flagged as such when building with the toolchain.
# Disable -Werror for now.
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Werror)
cmake: Group compile options together.
2021-03-28 17:43:05 +03:00
endif()
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wall)
add_compile_options(-Wextra)
Everywhere: Add "free" warnings The following warnings do not occur anywhere in the codebase and so enabling them is effectivly free: * `-Wcast-align` * `-Wduplicated-cond` * `-Wformat=2` * `-Wlogical-op` * `-Wmisleading-indentation` * `-Wunused` These are taken as a strict subset of the list in #5487.
2021-04-15 10:07:44 +03:00
# The following warnings are sorted by the "base" name (the part excluding the initial Wno or W).
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wno-address-of-packed-member)
Everywhere: Add "free" warnings The following warnings do not occur anywhere in the codebase and so enabling them is effectivly free: * `-Wcast-align` * `-Wduplicated-cond` * `-Wformat=2` * `-Wlogical-op` * `-Wmisleading-indentation` * `-Wunused` These are taken as a strict subset of the list in #5487.
2021-04-15 10:07:44 +03:00
add_compile_options(-Wcast-align)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wcast-qual)
add_compile_options(-Wno-deprecated-copy)
Everywhere: Add "free" warnings The following warnings do not occur anywhere in the codebase and so enabling them is effectivly free: * `-Wcast-align` * `-Wduplicated-cond` * `-Wformat=2` * `-Wlogical-op` * `-Wmisleading-indentation` * `-Wunused` These are taken as a strict subset of the list in #5487.
2021-04-15 10:07:44 +03:00
add_compile_options(-Wduplicated-cond)
Everywhere: Add `-Wdouble-promotion` warning This warning informs of float-to-double conversions. The best solution seems to be to do math *either* in 32-bit *or* in 64-bit, and only to cross over when absolutely necessary.
2021-04-15 10:36:14 +03:00
add_compile_options(-Wdouble-promotion)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wno-expansion-to-defined)
Everywhere: Add "free" warnings The following warnings do not occur anywhere in the codebase and so enabling them is effectivly free: * `-Wcast-align` * `-Wduplicated-cond` * `-Wformat=2` * `-Wlogical-op` * `-Wmisleading-indentation` * `-Wunused` These are taken as a strict subset of the list in #5487.
2021-04-15 10:07:44 +03:00
add_compile_options(-Wformat=2)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wimplicit-fallthrough)
Everywhere: Add "free" warnings The following warnings do not occur anywhere in the codebase and so enabling them is effectivly free: * `-Wcast-align` * `-Wduplicated-cond` * `-Wformat=2` * `-Wlogical-op` * `-Wmisleading-indentation` * `-Wunused` These are taken as a strict subset of the list in #5487.
2021-04-15 10:07:44 +03:00
add_compile_options(-Wlogical-op)
add_compile_options(-Wmisleading-indentation)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wmissing-declarations)
add_compile_options(-Wno-nonnull-compare)
Everything: Add `-Wnon-virtual-dtor` flag This flag warns on classes which have `virtual` functions but do not have a `virtual` destructor. This patch adds both the flag and missing destructors. The access level of the destructors was determined by a two rules of thumb: 1. A destructor should have a similar or lower access level to that of a constructor. 2. Having a `private` destructor implicitly deletes the default constructor, which is probably undesirable for "interface" types (classes with only virtual functions and no data). In short, most of the added destructors are `protected`, unless the compiler complained about access.
2021-04-15 20:43:29 +03:00
add_compile_options(-Wnon-virtual-dtor)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wno-unknown-warning-option)
add_compile_options(-Wundef)
Everywhere: Add "free" warnings The following warnings do not occur anywhere in the codebase and so enabling them is effectivly free: * `-Wcast-align` * `-Wduplicated-cond` * `-Wformat=2` * `-Wlogical-op` * `-Wmisleading-indentation` * `-Wunused` These are taken as a strict subset of the list in #5487.
2021-04-15 10:07:44 +03:00
add_compile_options(-Wunused)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-Wwrite-strings)
CMake: Use add_compile_options instead of appending to CMAKE_CXX_FLAGS Problem: - Appending to CMAKE_CXX_FLAGS for everything is cumbersome. Solution: - Use the `add_compile_options` built-in function to handle adding compiler options (and even de-duplicating).
2020-12-22 04:04:46 +03:00
add_compile_options(-ffile-prefix-map=${CMAKE_SOURCE_DIR}=.)
cmake: Tidy compiler options. Prior to this patch there was some long line of unreadable compiler options. Now the long lines are deduplicated and there is only one option per line to ease reading/maintenance.
2021-03-28 17:48:37 +03:00
add_compile_options(-fno-exceptions)
add_compile_options(-fstack-protector-strong)
add_compile_options(-g1)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
Build: Only use -fstack-clash-protection with GCC This is not yet supported by Clang, so let's disable it for non-GCC compilers for now. (CLion was whining about it.)
2021-02-23 16:15:26 +03:00
if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
add_compile_options(-fstack-clash-protection)
endif()
CMake: Use add_compile_options instead of appending to CMAKE_CXX_FLAGS Problem: - Appending to CMAKE_CXX_FLAGS for everything is cumbersome. Solution: - Use the `add_compile_options` built-in function to handle adding compiler options (and even de-duplicating).
2020-12-22 04:04:46 +03:00
add_compile_definitions(DEBUG SANITIZE_PTRS)
Toolchain: Fix usage of libgcc_s & build PIE executables by default We can now build the porst with the shared libraries toolchain.
2020-12-11 16:44:08 +03:00
set(CMAKE_CXX_FLAGS_STATIC "${CMAKE_CXX_FLAGS} -static")
Toolchain+LibC: Fix usage of crt files We now configure the gcc spec files to use a different crt files for static & PIE binaries. This relieves us from the need to explicitly specify the desired crt0 file in cmake scripts.
2020-12-20 23:32:10 +03:00
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -pie -fpic")
CMake: Remove some trailing whitespace from a few CMakeLists.txt files
2021-01-01 13:20:55 +03:00
AK: Rename {DBGLN_NO => ENABLE}_COMPILETIME_FORMAT_CHECK This is no longer limited to dbgln(). Also invert it to match all the other ENABLE_FOO options.
2021-02-23 20:14:04 +03:00
if (ENABLE_COMPILETIME_FORMAT_CHECK)
add_compile_definitions(ENABLE_COMPILETIME_FORMAT_CHECK)
Build: Allow setting DBGLN_NO_COMPILETIME_FORMAT_CHECK via CMake flag
2021-02-08 20:26:28 +03:00
endif()
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
add_link_options(--sysroot ${CMAKE_BINARY_DIR}/Root)
Libraries: Move to Userland/Libraries/
2021-01-12 14:17:30 +03:00
include_directories(Userland/Libraries/LibC)
LibC: Move crypt() and crypt_r() to the right header file According to POSIX.1 these should be in <crypt.h>.
2021-05-01 12:38:19 +03:00
include_directories(Userland/Libraries/LibCrypt)
Libraries: Move to Userland/Libraries/
2021-01-12 14:17:30 +03:00
include_directories(Userland/Libraries/LibM)
LibC: Move crypt() and crypt_r() to the right header file According to POSIX.1 these should be in <crypt.h>.
2021-05-01 12:38:19 +03:00
include_directories(Userland/Libraries/LibPthread)
Userland: Add LibSystem and funnel all syscalls through it This achieves two things: - Programs can now intentionally perform arbitrary syscalls by calling syscall(). This allows us to work on things like syscall fuzzing. - It restricts the ability of userspace to make syscalls to a single 4KB page of code. In order to call the kernel directly, an attacker must now locate this page and call through it.
2021-02-05 14:16:30 +03:00
include_directories(Userland/Libraries/LibSystem)
Services: Move to Userland/Services/
2021-01-12 14:23:01 +03:00
include_directories(Userland/Services)
Shell: Move to Userland/Shell/
2021-01-12 13:53:14 +03:00
include_directories(Userland)
TextEditor: Move the main window UI to JSON This is our first client of the new JSON GUI declaration thingy. The skeleton of the TextEditor app GUI is now declared separately from the C++ logic, and we use the Core::Object::name() of widgets to locate them once they have been instantiated by the GUI builder.
2020-09-14 13:51:12 +03:00
include_directories(${CMAKE_CURRENT_BINARY_DIR})
Services: Move to Userland/Services/
2021-01-12 14:23:01 +03:00
include_directories(${CMAKE_CURRENT_BINARY_DIR}/Userland/Services)
Libraries: Move to Userland/Libraries/
2021-01-12 14:17:30 +03:00
include_directories(${CMAKE_CURRENT_BINARY_DIR}/Userland/Libraries)
Shell: Move to Userland/Shell/
2021-01-12 13:53:14 +03:00
include_directories(${CMAKE_CURRENT_BINARY_DIR}/Userland)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
Userland: Port UBSAN implementation to userspace Take Kernel/UBSanitizer.cpp and make a copy in LibSanitizer. We can use LibSanitizer to hold other sanitizers as people implement them :^). To enable UBSAN for LibC, DynamicLoader, and other low level system libraries, LibUBSanitizer is built as a serenity_libc, and has a static version for LibCStatic to use. The approach is the same as that taken in Note that this means now UBSAN is enabled for code generators, Lagom, Kernel, and Userspace with -DENABLE_UNDEFINED_SANTIZER=ON. In userspace however, UBSAN is not deadly (yet). Co-authored-by: ForLoveOfCats <ForLoveOfCats@vivaldi.net>
2021-05-24 04:40:22 +03:00
# FIXME: vptr sanitizing requires.. intense ABI wrangling of std::type_info
# And would be better served by porting ubsan_type_hash_itanium.cpp from compiler-rt
# We don't set this along with the original fsanitize=undefined because for host tools, we can rely on
# the host's libubsan to provide the ABI-specific vptr type cache.
# This is not a problem for the Kernel, because it does not have RTTI enabled :^)
if (ENABLE_UNDEFINED_SANITIZER)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fno-sanitize=vptr")
endif()
Ports: Fix CMake-based ports The SDL port failed to build because the CMake toolchain filed pointed to the old root. Now the toolchain file assumes that the Root is in Build/Root. Additionally, the AK/ and Kernel/ headers need to be installed in the root too.
2020-05-26 21:20:24 +03:00
add_subdirectory(AK)
Build: Switch to CMake :^) Closes https://github.com/SerenityOS/serenity/issues/2080
2020-05-06 18:40:06 +03:00
add_subdirectory(Kernel)
add_subdirectory(Userland)
Tests: Establish root Tests directory, move Userland/Tests there With the goal of centralizing all tests in the system, this is a first step to establish a Tests sub-tree. It will contain all of the unit tests and test harnesses for the various components in the system.
2021-05-06 11:14:50 +03:00
add_subdirectory(Tests)
Base: Remove /res/pci.ids and download at build time instead This is an external file from https://pci-ids.ucw.cz that's being updated daily, which was imported a while ago but probably shouldn't live in the SerenityOS repository in the first place (or else would need manual maintenance). The legal aspects of redistributing this file as we currently do are not quite clear to me, they require either GPL (version 2 or later) or 3-clause BSD - Serenity is 2-clause BSD... The current version we use is 2019.08.08, so quite outdated - and while most of these devices are obviously not supported, we're still capable of *listing* them, so having an up-to-date version with recent additions and fixes would be nice. This updates the root CMakeLists.txt to check for existence of the file and download it if not found - effectively on every fresh build. Do note that this is not a critical file, and the system runs just fine should this ever fail. :^)
2021-02-07 02:52:40 +03:00
Build: Download and uncompress gzipped version of pci.ids Partially addresses #5611.
2021-03-04 01:50:25 +03:00
set(PCI_IDS_GZ_URL https://pci-ids.ucw.cz/v2.2/pci.ids.gz)
set(PCI_IDS_GZ_PATH ${CMAKE_BINARY_DIR}/pci.ids.gz)
set(PCI_IDS_PATH ${CMAKE_BINARY_DIR}/pci.ids)
set(PCI_IDS_INSTALL_PATH ${CMAKE_INSTALL_DATAROOTDIR}/pci.ids)
if(ENABLE_PCI_IDS_DOWNLOAD AND NOT EXISTS ${PCI_IDS_GZ_PATH})
message(STATUS "Downloading PCI ID database from ${PCI_IDS_GZ_URL}...")
file(DOWNLOAD ${PCI_IDS_GZ_URL} ${PCI_IDS_GZ_PATH} INACTIVITY_TIMEOUT 10)
endif()
if(EXISTS ${PCI_IDS_GZ_PATH} AND NOT EXISTS ${PCI_IDS_INSTALL_PATH})
message(STATUS "Extracting PCI ID database from ${PCI_IDS_GZ_PATH}...")
execute_process(COMMAND gzip -k -d ${PCI_IDS_GZ_PATH})
file(MAKE_DIRECTORY ${CMAKE_INSTALL_DATAROOTDIR})
file(RENAME ${PCI_IDS_PATH} ${PCI_IDS_INSTALL_PATH})
Base: Remove /res/pci.ids and download at build time instead This is an external file from https://pci-ids.ucw.cz that's being updated daily, which was imported a while ago but probably shouldn't live in the SerenityOS repository in the first place (or else would need manual maintenance). The legal aspects of redistributing this file as we currently do are not quite clear to me, they require either GPL (version 2 or later) or 3-clause BSD - Serenity is 2-clause BSD... The current version we use is 2019.08.08, so quite outdated - and while most of these devices are obviously not supported, we're still capable of *listing* them, so having an up-to-date version with recent additions and fixes would be nice. This updates the root CMakeLists.txt to check for existence of the file and download it if not found - effectively on every fresh build. Do note that this is not a critical file, and the system runs just fine should this ever fail. :^)
2021-02-07 02:52:40 +03:00
endif()
Reference in New Issue Copy Permalink