ladybird/Userland/Libraries/LibRegex/RegexMatcher.h

302 lines
10 KiB
C
Raw Normal View History

LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
/*
* Copyright (c) 2020, Emanuel Sprung <emanuel.sprung@gmail.com>
*
* SPDX-License-Identifier: BSD-2-Clause
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
*/
#pragma once
#include "RegexByteCode.h"
#include "RegexMatch.h"
#include "RegexOptions.h"
#include "RegexParser.h"
#include <AK/Forward.h>
#include <AK/GenericLexer.h>
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
#include <AK/HashMap.h>
#include <AK/Types.h>
#include <AK/Utf32View.h>
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
#include <AK/Vector.h>
#include <ctype.h>
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
#include <stdio.h>
namespace regex {
namespace Detail {
struct Block {
size_t start;
size_t end;
};
}
2021-07-23 18:55:14 +03:00
static constexpr const size_t c_max_recursion = 5000;
static constexpr const size_t c_match_preallocation_count = 0;
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
struct RegexResult final {
bool success { false };
size_t count { 0 };
Vector<Match> matches;
Vector<Vector<Match>> capture_group_matches;
size_t n_operations { 0 };
size_t n_capture_groups { 0 };
size_t n_named_capture_groups { 0 };
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
};
template<class Parser>
class Regex;
template<class Parser>
class Matcher final {
public:
Matcher(Regex<Parser> const* pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
: m_pattern(pattern)
, m_regex_options(regex_options.value_or({}))
{
}
~Matcher() = default;
RegexResult match(RegexStringView, Optional<typename ParserTraits<Parser>::OptionsType> = {}) const;
RegexResult match(Vector<RegexStringView> const&, Optional<typename ParserTraits<Parser>::OptionsType> = {}) const;
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
typename ParserTraits<Parser>::OptionsType options() const
{
return m_regex_options;
}
void reset_pattern(Badge<Regex<Parser>>, Regex<Parser> const* pattern)
{
m_pattern = pattern;
}
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
private:
bool execute(MatchInput const& input, MatchState& state, size_t& operations) const;
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
Regex<Parser> const* m_pattern;
2021-07-23 18:55:14 +03:00
typename ParserTraits<Parser>::OptionsType const m_regex_options;
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
};
template<class Parser>
class Regex final {
public:
DeprecatedString pattern_value;
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
regex::Parser::Result parser_result;
OwnPtr<Matcher<Parser>> matcher { nullptr };
mutable size_t start_offset { 0 };
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
static regex::Parser::Result parse_pattern(StringView pattern, typename ParserTraits<Parser>::OptionsType regex_options = {});
explicit Regex(DeprecatedString pattern, typename ParserTraits<Parser>::OptionsType regex_options = {});
Regex(regex::Parser::Result parse_result, DeprecatedString pattern, typename ParserTraits<Parser>::OptionsType regex_options = {});
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
~Regex() = default;
Regex(Regex&&);
Regex& operator=(Regex&&);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
typename ParserTraits<Parser>::OptionsType options() const;
DeprecatedString error_string(Optional<DeprecatedString> message = {}) const;
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
RegexResult match(RegexStringView view, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
if (!matcher || parser_result.error != Error::NoError)
return {};
return matcher->match(view, regex_options);
}
RegexResult match(Vector<RegexStringView> const& views, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
{
if (!matcher || parser_result.error != Error::NoError)
return {};
return matcher->match(views, regex_options);
}
DeprecatedString replace(RegexStringView view, StringView replacement_pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
{
if (!matcher || parser_result.error != Error::NoError)
return {};
StringBuilder builder;
size_t start_offset = 0;
RegexResult result = matcher->match(view, regex_options);
if (!result.success)
return view.to_deprecated_string();
for (size_t i = 0; i < result.matches.size(); ++i) {
auto& match = result.matches[i];
builder.append(view.substring_view(start_offset, match.global_offset - start_offset).to_deprecated_string());
start_offset = match.global_offset + match.view.length();
GenericLexer lexer(replacement_pattern);
while (!lexer.is_eof()) {
if (lexer.consume_specific('\\')) {
if (lexer.consume_specific('\\')) {
builder.append('\\');
continue;
}
auto number = lexer.consume_while(isdigit);
if (auto index = number.to_uint(); index.has_value() && result.n_capture_groups >= index.value()) {
builder.append(result.capture_group_matches[i][index.value() - 1].view.to_deprecated_string());
} else {
builder.appendff("\\{}", number);
}
} else {
builder.append(lexer.consume_while([](auto ch) { return ch != '\\'; }));
}
}
}
builder.append(view.substring_view(start_offset, view.length() - start_offset).to_deprecated_string());
return builder.to_deprecated_string();
}
2021-07-23 18:55:14 +03:00
// FIXME: replace(Vector<RegexStringView> const , ...)
RegexResult search(RegexStringView view, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
if (!matcher || parser_result.error != Error::NoError)
return {};
AllOptions options = (AllOptions)regex_options.value_or({});
if ((options & AllFlags::MatchNotBeginOfLine) && (options & AllFlags::MatchNotEndOfLine)) {
options.reset_flag(AllFlags::MatchNotEndOfLine);
options.reset_flag(AllFlags::MatchNotBeginOfLine);
}
options.reset_flag(AllFlags::Internal_Stateful);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
options |= AllFlags::Global;
return matcher->match(view, options);
}
RegexResult search(Vector<RegexStringView> const& views, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
if (!matcher || parser_result.error != Error::NoError)
return {};
AllOptions options = (AllOptions)regex_options.value_or({});
if ((options & AllFlags::MatchNotBeginOfLine) && (options & AllFlags::MatchNotEndOfLine)) {
options.reset_flag(AllFlags::MatchNotEndOfLine);
options.reset_flag(AllFlags::MatchNotBeginOfLine);
}
options.reset_flag(AllFlags::Internal_Stateful);
options |= AllFlags::Global;
return matcher->match(views, options);
}
bool match(RegexStringView view, RegexResult& m, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
{
m = match(view, regex_options);
return m.success;
}
bool match(Vector<RegexStringView> const& views, RegexResult& m, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
{
m = match(views, regex_options);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
return m.success;
}
bool search(RegexStringView view, RegexResult& m, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
m = search(view, regex_options);
return m.success;
}
bool search(Vector<RegexStringView> const& views, RegexResult& m, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
{
m = search(views, regex_options);
return m.success;
}
bool has_match(RegexStringView view, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
if (!matcher || parser_result.error != Error::NoError)
return false;
RegexResult result = matcher->match(view, AllOptions { regex_options.value_or({}) } | AllFlags::SkipSubExprResults);
return result.success;
}
bool has_match(Vector<RegexStringView> const& views, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {}) const
{
if (!matcher || parser_result.error != Error::NoError)
return false;
RegexResult result = matcher->match(views, AllOptions { regex_options.value_or({}) } | AllFlags::SkipSubExprResults);
return result.success;
}
using BasicBlockList = Vector<Detail::Block>;
static BasicBlockList split_basic_blocks(ByteCode const&);
private:
void run_optimization_passes();
void attempt_rewrite_loops_as_atomic_groups(BasicBlockList const&);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
};
// free standing functions for match, search and has_match
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
template<class Parser>
RegexResult match(RegexStringView view, Regex<Parser>& pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
return pattern.match(view, regex_options);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
}
template<class Parser>
RegexResult match(Vector<RegexStringView> const& view, Regex<Parser>& pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
return pattern.match(view, regex_options);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
}
template<class Parser>
bool match(RegexStringView view, Regex<Parser>& pattern, RegexResult&, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
return pattern.match(view, regex_options);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
}
template<class Parser>
bool match(Vector<RegexStringView> const& view, Regex<Parser>& pattern, RegexResult&, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
return pattern.match(view, regex_options);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
}
template<class Parser>
RegexResult search(RegexStringView view, Regex<Parser>& pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
{
return pattern.search(view, regex_options);
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
}
template<class Parser>
RegexResult search(Vector<RegexStringView> const& views, Regex<Parser>& pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
{
return pattern.search(views, regex_options);
}
template<class Parser>
bool search(RegexStringView view, Regex<Parser>& pattern, RegexResult&, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
{
return pattern.search(view, regex_options);
}
template<class Parser>
bool search(Vector<RegexStringView> const& views, Regex<Parser>& pattern, RegexResult&, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
{
return pattern.search(views, regex_options);
}
template<class Parser>
bool has_match(RegexStringView view, Regex<Parser>& pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
{
return pattern.has_match(view, regex_options);
}
template<class Parser>
bool has_match(Vector<RegexStringView> const& views, Regex<Parser>& pattern, Optional<typename ParserTraits<Parser>::OptionsType> regex_options = {})
{
return pattern.has_match(views, regex_options);
}
LibRegex: Add a regular expression library This commit is a mix of several commits, squashed into one because the commits before 'Move regex to own Library and fix all the broken stuff' were not fixable in any elegant way. The commits are listed below for "historical" purposes: - AK: Add options/flags and Errors for regular expressions Flags can be provided for any possible flavour by adding a new scoped enum. Handling of flags is done by templated Options class and the overloaded '|' and '&' operators. - AK: Add Lexer for regular expressions The lexer parses the input and extracts tokens needed to parse a regular expression. - AK: Add regex Parser and PosixExtendedParser This patchset adds a abstract parser class that can be derived to implement different parsers. A parser produces bytecode to be executed within the regex matcher. - AK: Add regex matcher This patchset adds an regex matcher based on the principles of the T-REX VM. The bytecode pruduced by the respective Parser is put into the matcher and the VM will recursively execute the bytecode according to the available OpCodes. Possible improvement: the recursion could be replaced by multi threading capabilities. To match a Regular expression, e.g. for the Posix standard regular expression matcher use the following API: ``` Pattern<PosixExtendedParser> pattern("^.*$"); auto result = pattern.match("Well, hello friends!\nHello World!"); // Match whole needle EXPECT(result.count == 1); EXPECT(result.matches.at(0).view.starts_with("Well")); EXPECT(result.matches.at(0).view.end() == "!"); result = pattern.match("Well, hello friends!\nHello World!", PosixFlags::Multiline); // Match line by line EXPECT(result.count == 2); EXPECT(result.matches.at(0).view == "Well, hello friends!"); EXPECT(result.matches.at(1).view == "Hello World!"); EXPECT(pattern.has_match("Well,....")); // Just check if match without a result, which saves some resources. ``` - AK: Rework regex to work with opcodes objects This patchsets reworks the matcher to work on a more structured base. For that an abstract OpCode class and derived classes for the specific OpCodes have been added. The respective opcode logic is contained in each respective execute() method. - AK: Add benchmark for regex - AK: Some optimization in regex for runtime and memory - LibRegex: Move regex to own Library and fix all the broken stuff Now regex works again and grep utility is also in place for testing. This commit also fixes the use of regex.h in C by making `regex_t` an opaque (-ish) type, which makes its behaviour consistent between C and C++ compilers. Previously, <regex.h> would've blown C compilers up, and even if it didn't, would've caused a leak in C code, and not in C++ code (due to the existence of `OwnPtr` inside the struct). To make this whole ordeal easier to deal with (for now), this pulls the definitions of `reg*()` into LibRegex. pros: - The circular dependency between LibC and LibRegex is broken - Eaiser to test (without accidentally pulling in the host's libc!) cons: - Using any of the regex.h functions will require the user to link -lregex - The symbols will be missing from libc, which will be a big surprise down the line (especially with shared libs). Co-Authored-By: Ali Mohammad Pur <ali.mpfard@gmail.com>
2020-04-26 15:45:10 +03:00
}
using regex::has_match;
using regex::match;
using regex::Regex;
using regex::RegexResult;