mirror of
https://github.com/LadybirdBrowser/ladybird.git
synced 2024-08-17 01:10:28 +03:00
Documentation: Tweak RunningOnRaspberryPi a bit
This commit is contained in:
parent
1e1cd07549
commit
ef1d247d79
Notes:
sideshowbarker
2024-07-18 02:05:31 +09:00
Author: https://github.com/nico Commit: https://github.com/SerenityOS/serenity/commit/ef1d247d79d Pull-request: https://github.com/SerenityOS/serenity/pull/10502 Reviewed-by: https://github.com/linusg Reviewed-by: https://github.com/mundak
@ -6,9 +6,11 @@ This is for development purposes only - Serenity doesn't currently boot on Raspe
|
||||
|
||||
Currently only UART output is supported, no display.
|
||||
|
||||
64-bit only, so you need a Rasperry Pi 3 or newer.
|
||||
|
||||
## Running in QEMU
|
||||
|
||||
### Step 1: Setup Serenity
|
||||
### Step 1: Set Up Serenity
|
||||
|
||||
Please follow [build instructions](BuildInstructions.md) to download and build Serenity. Make sure everything builds successfully for x86.
|
||||
|
||||
@ -30,6 +32,12 @@ Meta/serenity.sh run aarch64
|
||||
|
||||
It should build Serenity and open a QEMU window, similar to the x86 version. You should see some messages in the terminal.
|
||||
|
||||
You can also run it under gdb with:
|
||||
|
||||
```console
|
||||
Meta/serenity.sh gdb aarch64
|
||||
```
|
||||
|
||||
## Running on real hardware using an SD Card
|
||||
|
||||
### Step 0: Download and run Raspberry Pi OS from an SD Card
|
||||
@ -40,21 +48,29 @@ This step is needed because the original firmware files need to be present on th
|
||||
|
||||
Please follow one of the existing guides (for example [here](https://scribles.net/setting-up-serial-communication-between-raspberry-pi-and-pc)) and make sure UART is working on Raspberry Pi OS before proceeding.
|
||||
|
||||
### Step 2: Mount SD Card and modify config.txt file on Boot/ partition
|
||||
### Step 2: Mount SD Card
|
||||
|
||||
Add the following lines:
|
||||
If you use a Raspberry Pi 4, and your serenity kernel is called `kernel8.img`
|
||||
(the default), and you don't have any other `kernel*.img` files on your SD
|
||||
card, make sure `config.txt` is empty.
|
||||
|
||||
If you want to use filename that isn't `kernel8.img` or if you want to keep
|
||||
other `kernel*.img` files on your SD card, put this in config.txt:
|
||||
|
||||
```
|
||||
arm_64bit=1
|
||||
kernel=myfilename.img
|
||||
```
|
||||
|
||||
If you use a Raspberry Pi 3, put this in config.txt:
|
||||
|
||||
```
|
||||
enable_uart=1
|
||||
arm_64bit=1
|
||||
# kernel=serenity.img
|
||||
```
|
||||
|
||||
The last line is optional and specifies which kernel to use. You can either replace the default `kernel8.img` file with the Serenity kernel or use a custom file name to be able to easily switch between kernels.
|
||||
|
||||
### Step 3: Copy Serenity kernel to SD Card
|
||||
|
||||
`kernel8.img` build artifact can be found in `Build/aarch64/Kernel/Prekernel/` directory. Copy it to the main directory on `Boot/` partition, next to the `config.txt` file. You can either replace the original file or use another name (see above).
|
||||
`kernel8.img` can be found in `Build/aarch64/Kernel/Prekernel/`. Copy it to the main directory on the `Boot/` partition, next to `config.txt`. You can either replace the original file or use another name (see above).
|
||||
|
||||
### Step 4: Put the SD Card in the Raspberry Pi and power on
|
||||
|
||||
@ -76,7 +92,7 @@ This is enabled by default on Raspberry Pi 3+. For the previous boards please se
|
||||
|
||||
This directory will serve as a TFTP server, sending files to the Raspberry Pi when requested.
|
||||
|
||||
### Step 2: Set up network interface
|
||||
### Step 2: Set up the network interface
|
||||
|
||||
Switch the network interface to static mode (static IP) and disable the firewall.
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user