...and also RangeAllocator => VirtualRangeAllocator.
This clarifies that the ranges we're dealing with are *virtual* memory
ranges and not anything else.
Problem:
- New `all_of` implementation takes the entire container so the user
does not need to pass explicit begin/end iterators. This is unused
except is in tests.
Solution:
- Make use of the new and more user-friendly version where possible.
We don't need to have a dedicated API for creating a VMObject with a
single page, the multi-page API option works in all cases.
Also make the API take a Span<NonnullRefPtr<PhysicalPage>> instead of
a NonnullRefPtrVector<PhysicalPage>.
The `#pragma GCC diagnostic` part is needed because the class has
virtual methods with the same name but different arguments, and Clang
tries to warn us that we are not actually overriding anything with
these.
Weirdly enough, GCC does not seem to care.
This fixes a bug that occurs when the controller's ports are not
(internally) numbered sequentially.
This is done by checking the bits set in PI.
This bug was found on bare-metal, on a laptop with 1 Port that
was reported as port 4.
If we are in a shared interrupt handler, the called handlers might
indicate it was not their interrupt, so we should not increment the
call counter of these handlers.
This has a quirk with the AMD Hudson-2 SATA controller. [1022:7801]
Having this flag set makes the controller become stuck in a busy loop.
I decided to remove the flag instead of making it a quirk as it still
works with Qemu, VirtualBox, VMware Player and the Intel Wildcat
Point-LP SATA Controller [8086:9c83] without it, thus making it simpler
to just remove it.
Partial fix for #7738 (as it still does not work in IDE mode)
This change allows the controller to utilize interrupts even if no
device was connected to a port when we initialize it, so we can support
hotplug events now.
This was proved to be a problematic option. I tested this option on
bare metal AHCI controller, and if we didn't reset the controller, the
firmware (SeaBIOS) could leave the controller state not clean, so an
plugged device signature was in place although the specific port had no
plugged device after rebooting.
Therefore, we need to ensure we use the controller in a clean state
always.
In addition to that, the Complete option was renamed to Aggressive, as
it represents better the consequences of choosing this option.
Fixes off-by-one caused by reading the register directly
without adding a 1 to it, because AHCI reports 1 less port than
the actual number of ports supported.
On my machine, it only sets PRC and not PCC.
Confirmed to happen on:
- 8086:9ca2 (Intel Corporation Wildcat Point-LP SATA Controller
[AHCI Mode] (rev 03))
On my bare metal machine, enabling it as this point causes it to
instantly send an interrupt, and we're too early in the process
to be able to handle AHCI interrupts. The interrupts were being
enabled in the initialize function anyway.
Confirmed to happen on:
- 8086:9ca2 (Intel Corporation Wildcat Point-LP SATA Controller
[AHCI Mode] (rev 03))
- 8086:3b22 (Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Controller (rev 06))
AnonymousVMObject::create_with_physical_page(s) can't be NonnullRefPtr
as it allocates internally. Fixing the API then surfaced an issue in
ScatterGatherList, where the code was attempting to create an
AnonymousVMObject in the constructor which will not be observable
during OOM.
Fix all of these issues and start propagating errors at the callers
of the AnonymousVMObject and ScatterGatherList APis.
This code was unlocking the lock directly, but the Locker is still
attached, causing the lock to be unlocked an extra time, hence
corrupting the internal lock state.
This is extra confusing though, as complete_current_request() runs
without a lock which also looks like a bug. But that's a task for
another day.
We want to move this out of the AHCI subsystem into the VM system,
since other parts of the kernel may need to perform scatter-gather IO.
We rename the current VM::ScatterGatherList impl that's used in the
virtio subsystem to VM::ScatterGatherRefList, since its distinguishing
feature from the AHCI scatter-gather list is that it doesn't own its
buffers.
We had some inconsistencies before:
- Sometimes "The", sometimes "the"
- Sometimes trailing ".", sometimes no trailing "."
I picked the most common one (lowecase "the", trailing ".") and applied
it to all copyright headers.
By using the exact same string everywhere we can ensure nothing gets
missed during a global search (and replace), and that these
inconsistencies are not spread any further (as copyright headers are
commonly copied to new files).
The overall design is the same, but we change a few things,
like decreasing the amount of blocking forever loops. The goal
is to ensure the kernel won't hang forever when dealing with
buggy hardware.
Also, we reset the channel when initializing it, just in case the
hardware was in bad state before we start use it.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
The first one is for disabling the PS2 controller, the other one is for
disabling physical storage enumeration.
We can't be sure any machine will work with our implementation,
therefore this will help us to test more machines.
