This mostly just moved the problem, as a lot of the callers are not
capable of propagating the errors themselves, but it's a step in the
right direction.
Since NVME devices end with a digit that indicates the node index we
cannot simply append a partition index. Instead, there will be a "p"
character as separator, e.g. /dev/nvme0n1p3 for the 3rd partition.
So, if the early device name ends in a digit we need to add this
separater before matching for the partition index.
If the partition index is omitted (as is the default) the root file
system is on a disk without any partition table (e.g. using QEMU).
This enables booting from the correct partition on an NVMe drive by
setting the command line variable root to e.g. root=/dev/nvme0n1p1
We need to use the volatile keyword when mapping the device registers,
or the compiler may optimize access, which lead to this QEMU error:
pci_nvme_ub_mmiord_toosmall in nvme_mmio_read: MMIO read smaller than
32-bits, offset=0x0
Add a basic NVMe driver support to serenity
based on NVMe spec 1.4.
The driver can support multiple NVMe drives (subsystems).
But in a NVMe drive, the driver can support one controller
with multiple namespaces.
Each core will get a separate NVMe Queue.
As the system lacks MSI support, PIN based interrupts are
used for IO.
Tested the NVMe support by replacing IDE driver
with the NVMe driver :^)
This will allow File and it's descendants to use RefCounted instead of
having a custom implementation of unref. (Since RefCounted calls
will_be_destroyed automatically)
This commit also removes an erroneous call to `before_removing` in
AHCIPort, this is a duplicate call, as the only reference to the device
is immediately dropped following the call, which in turns calls
`before_removing` via File::unref.
This was a premature optimization from the early days of SerenityOS.
The eternal heap was a simple bump pointer allocator over a static
byte array. My original idea was to avoid heap fragmentation and improve
data locality, but both ideas were rooted in cargo culting, not data.
We would reserve 4 MiB at boot and only ended up using ~256 KiB, wasting
the rest.
This patch replaces all kmalloc_eternal() usage by regular kmalloc().
In order to reduce our reliance on __builtin_{ffs, clz, ctz, popcount},
this commit removes all calls to these functions and replaces them with
the equivalent functions in AK/BuiltinWrappers.h.
Some calls of copy_to_user were converting Userspace<T*> to
Userspace<U*> via the implicit conversion to FlatPtr. Change them to use
the static_ptr_cast overload that is designed to express this conversion
Instead of repeating ourselves with the pattern of waiting for some
condition to be met, we can have a general method for this task,
and then we can provide the retry count, the required delay and a lambda
function for the checked condition.
Don't use interrupts when trying to reset a device that is connected to
a port on the AHCI controller, and instead poll for changes in status to
break out from the loop. At the worst case scenario we can wait 0.01
seconds for each SATA reset.
Don't use interrupts when trying to identify a device that is connected
to a port on the AHCI controller, and instead poll for changes in status
to end the transaction.
Not only this simplifies the initialization sequence, it ensures that
for whatever reason the controller doesn't send an IRQ, we are never
getting stuck at this point.
Like what happened with the PCI and USB code, this feels like the right
thing to do because we can improve on the ATA capabilities and keep it
distinguished from the rest of the subsystem.
We now use AK::Error and AK::ErrorOr<T> in both kernel and userspace!
This was a slightly tedious refactoring that took a long time, so it's
not unlikely that some bugs crept in.
Nevertheless, it does pass basic functionality testing, and it's just
real nice to finally see the same pattern in all contexts. :^)
There's basically no real difference in software between a SATA harddisk
and IDE harddisk. The difference in the implementation is for the host
bus adapter protocol and registers layout.
Therefore, there's no point in putting a distinction in software to
these devices.
This change also greatly simplifies and removes stale APIs and removes
unnecessary parameters in constructor calls, which tighten things
further everywhere.
This change is another minor step towards removing `AK::String` from
the Kernel. Instead of dynamically allocating the storage_name we can
instead allocate it via a KString in the factory for each device, and
then push the device name down into the StorageDevice base class.
We don't have a way of doing `AK::String::formatted(..)` with a KString
at the moment, so cleaning that up will be left for a later day.
Previously there was a mix of returning plain strings and returning
explicit string views using `operator ""sv`. This change switches them
all to standardized on `operator ""sv` as it avoids a call to strlen.
Previously there was a mix of returning plain strings and returning
explicit string views using `operator ""sv`. This change switches them
all to standardized on `operator ""sv` as it avoids a call to strlen.
This allows us to remove the PCI::get_interrupt_line API function. As a
result, this removes a bunch of not so great patterns that we used to
cache PCI interrupt line in many IRQHandler derived classes instead of
just using interrupt_number method of IRQHandler class.
