We never supported VGA framebuffers and that folder was a big misleading
part of the graphics subsystem.
We do support bare-bones VGA text console (80x25), but that only happens
to be supported because we can't be 100% sure we can always initialize
framebuffer so in the worst scenario we default to plain old VGA console
so the user can still use its own machine.
Therefore, the only remaining parts of VGA is in the GraphicsManagement
code to help driving the VGA text console if needed.
In the same fashion like in the Linux kernel, we support pre-initialized
framebuffers that were set up by either the BIOS or the bootloader.
These framebuffers can be backed by any kind of video hardware, and are
not tied to VGA hardware at all. Therefore, this code should be in a
separate sub-folder in the Graphics subsystem to indicate this.
Move methods that are overriding the virtual methods in the File class,
to a private access scope in the DisplayConnector class because nobody
tries to access them in any derived class of this class.
- Remove some magic numbers
- Remove some duplicate branches
- Reduce the amount of casting between u8* and u32*
- Some renaming of confusing variables
The WindowServer doesn't use this interface anymore and therefore it's
not used by any userspace application, so let's remove this stale method
to ensure we don't have to bother with it anymore.
The mmap interface was removed when we introduced the DisplayConnector
class, as it was quite unsafe to use and didn't handle switching between
graphical and text modes safely. By using the SharedFramebufferVMObject,
we are able to elegantly coordinate the switch by remapping the attached
mmap'ed-Memory::Region(s) with different mappings, therefore, keeping
WindowServer to think that the mappings it has are still valid, while
they are going to a different physical range until we are back to the
graphical mode (after a switch from text mode).
Most drivers take advantage of the fact that we know where is the actual
framebuffer in physical memory space, the SharedFramebufferVMObject is
created with that information. However, the VirtIO driver is different
in that aspect, because it relies on DMA transactions to show graphics
on the framebuffer, so the SharedFramebufferVMObject is created with
that mindset to support the arbitrary framebuffer location in physical
memory space.
Keeping the exact details of a dirty rectangle doesn't make any sense
when we just flush the entire screen, so just keep a simple boolean
value to know if the screen needs to be flushed or not.
This fixes a weird bug that when sometimes a user tried to switch to
console mode, the screen was frozen on graphics mode. After a hour of
debugging this, it became apparent that the problem was that we left the
y offset of the bochs graphics device in an invalid state, so it was not
zero because the WindowServer changed it, and the framebuffer console
code is not aware of horizontal and vertical offsets of the framebuffer
screen, leading to the problem that the framebuffer console updates the
first framebuffer (y offset = 0), but hardware was indicated to show the
second framebuffer (y offset = first framebuffer height).
Therefore, when doing a switch between these modes, always set the y
offset to be zero.
This in turn makes the built-in kernel console much more nicer to look
into, so let's remove the support for 8x8 bitmap and instead add 8x16
font bitmap.
The old methods are already can be considered deprecated, and now after
we removed framebuffer devices entirely, we can safely remove these
methods too, which simplfies the GenericGraphicsAdapter class a lot.
Instead of letting the user to determine whether framebuffer devices
will be created (which is useless because they are gone by now), let's
simplify the flow by allowing the user to choose between full, limited
or disabled functionality. The determination happens only once, so, if
the user decided to disable graphics support, the initialize method
exits immediately. If limited functionality is chosen, then a generic
DisplayConnector is initialized with the preset framebuffer resolution,
if present, and then the initialize method exits. As a default, the code
proceeds to initialize all drivers as usual.
We shouldn't expose the VirtIO GPU3DDevice constructor as public method,
so instead, let's use the usual pattern of a static construction method
that uses the constructor within the method.
The DisplayConnector class is meant to replace the FramebufferDevice
class. The advantage of this class over the FramebufferDevice class is:
1. It removes the mmap interface entirely. This interface is unsafe, as
multiple processes could try to use it, and when switching to and from
text console mode, there's no "good" way to revoke a memory mapping from
this interface, let alone when there are multiple processes that call
this interface. Therefore, in the DisplayConnector class there's no
implementation for this method at all.
2. The class uses a new real-world structure called ModeSetting, which
takes into account the fact that real hardware requires more than width,
height and pitch settings to mode-set the display resolution.
3. The class assumes all instances should supply some sort of EDID,
so it facilitates such mechanism to do so. Even if a given driver does
not know what is the actual EDID, it will ask to create default-generic
EDID blob.
3. This class shifts the responsibilies of switching between console
mode and graphical mode from a GraphicsAdapter to the DisplayConnector
class, so when doing the switch, the GraphicsManagement code actually
asks each DisplayConnector object to do the switch and doesn't rely on
the GraphicsAdapter objects at all.
In most cases it's safe to abort the requested operation and go forward,
however, in some places it's not clear yet how to handle these failures,
therefore, we use the MUST() wrapper to force a kernel panic for now.
This helps solving an issue when we boot with text mode screen so the
Kernel initializes an early text mode console, but even after disabling
it, that console can still access VGA ports. This wouldn't be a problem
for emulated hardware but bare metal hardware might have a "conflict",
especially if the native driver explicitly request to disable the VGA
emulation.
Instead, hold the lock while we copy the contents to a stack-based
Vector then iterate on it without any locking.
Because we rely on heap allocations, we need to propagate errors back
in case of OOM condition, therefore, both PCI::enumerate API function
and PCI::Access::add_host_controller_and_enumerate_attached_devices use
now a ErrorOr<void> return value to propagate errors. OOM Error can only
occur when enumerating the m_device_identifiers vector under a spinlock
and trying to expand the temporary Vector which will be used locklessly
to actually iterate over the PCI::DeviceIdentifiers objects.
This code attempts to copy the `Protocol::Resource3DSpecification`
struct into request, starting at `Protocol::ResourceCreate3D::target`
member of the `Protocol::ResourceCreate3D` struct.
The problem is that the `Protocol::Resource3DSpecification` struct
does not having the trailing `u32 padding` that the `ResourceCreate3D`
struct has. Leading to memcopy overrunning the struct and corrupting
32 bits of data trailing the struct.
Found by SonarCloud:
- Memory copy function overflows the destination buffer.
These fences should not be needed, since we force the use of
synchronous operations through synchronous_virtio_gpu_command. The use
of these fences also causes severe lag when SERENITY_GL is enabled.
This commit flips VirtIOGPU back to using a Mutex for its operation
lock (instead of a spinlock). This is necessary for avoiding a few
system hangs when queuing actions on the driver from multiple
processes, which becomes much more of an issue when using VirGL from
multiple userspace process.
This does result in a few code paths where we inevitably have to grab
a mutex from inside a spinlock, the only way to fix both issues is to
move to issuing asynchronous virtio gpu commands.
This additionally refactors FramebufferDevice::try_to_initialize to not
leave the FramebufferDevice in an invalid state on errors.
This also unifies the logic between FramebufferDevice::mmap and
FramebufferDevice::try_to_initialize.
This comes with the drawback of removing the UNMAP_AFTER_INIT attribute
from this function, which wasn't honoured by IntelNativeGraphicsAdapter
anyway.
If there's no PCI bus, then it's safe to assume that the x86 machine we
run on supports VGA text mode console output with an ISA VGA adapter.
If this is the case, we just instantiate a ISAVGAAdapter object that
assumes this situation and allows us to boot into VGA text mode console.
Instead of winging it with "width * 4", use the actual pitch since it
may be different.
This makes the kernel text console show up in native 1368x768 on my
ThinkPad X250. :^)
