First scan PCI bus 0. Find any device on that bus, and if it's a
PCI-to-PCI bridge, recursively scan it too.
Then try to handle Multiple PCI host bridges on slot 0, device 0.
If we happen to miss some PCI buses because they are not reachable
through recursive PCI-to-PCI bridges scanning starting from bus 0, we
might find them in this scanning.
This simple driver simply finds a device in a device definitions list
and then sets up a SerialDevice instance based on the definition.
The driver currently only supports "WCH CH382 2S" pci serial boards,
as that is the only device available for me to test with, but most
other pci serial devices should be as easily addable as adding a
board_definitions entry.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
Based on pull #3236 by tomuta, this adds helper methods for generic
device initialization, and partily-broken virtqueue helper methods
Co-authored-by: Tom <tomut@yahoo.com>
Co-authored-by: Sahan <sahan.h.fernando@gmail.com>
This flag warns on classes which have `virtual` functions but do not
have a `virtual` destructor.
This patch adds both the flag and missing destructors. The access level
of the destructors was determined by a two rules of thumb:
1. A destructor should have a similar or lower access level to that of a
constructor.
2. Having a `private` destructor implicitly deletes the default
constructor, which is probably undesirable for "interface" types
(classes with only virtual functions and no data).
In short, most of the added destructors are `protected`, unless the
compiler complained about access.
Now the kernel supports 2 ECAM access methods.
MMIOAccess was renamed to WindowedMMIOAccess and is what we had until
now - each device that is detected on boot is assigned to a
memory-mapped window, so IO operations on multiple devices can occur
simultaneously due to creating multiple virtual mappings, hence the name
is a memory-mapped window.
This commit adds a new class called MMIOAccess (not to be confused with
the old MMIOAccess class). This class creates one memory-mapped window.
On each IO operation on a configuration space of a device, it maps the
requested PCI bus region to that window. Therefore it holds a SpinLock
during the operation to ensure that no other PCI bus region was mapped
during the call.
A user can choose to either use PCI ECAM with memory-mapped window
for each device, or for an entire bus. By default, the kernel prefers to
map the entire PCI bus region.
Apparently we don't enable PCI ECAM (MMIO access to the PCI
configuration space) even if we can. This is a regression, as it was
enabled in the past and in unknown time it was regressed.
The CommandLine::is_mmio_enabled method was renamed to
CommandLine::is_pci_ecam_enabled to better represent the meaning
of this method and what it determines.
Also, an UNMAP_AFTER_INIT macro was removed from a method
in the MMIOAccess class as it halted the system when the kernel
tried to access devices after the boot process.
This reverts commit 36a82188a8.
This register is write-only for the firmware (BIOS), and read-only for
us so we shouldn't set the PCI IRQ line never.
The firmware figured out the IRQ routing to the PIC for us, so changing
it won't affect anything. I was mistaken when I thought that changing
the value of this register will allow us to change its interrupt line,
like when changing a PCI BAR to relocate device resources as desired
with the requirements of the OS.
Mostly due to the fact that clang-format allows aligned comments via
AlignTrailingComments.
We could also use raw string literals in inline asm, which clang-format
deals with properly (and would be nicer in a lot of places).
Previously all of the CommandLine parsing was spread out around the
Kernel. Instead move it all into the Kernel CommandLine class, and
expose a strongly typed API for querying the state of options.
This may seem like a no-op change, however it shrinks down the Kernel by a bit:
.text -432
.unmap_after_init -60
.data -480
.debug_info -673
.debug_aranges 8
.debug_ranges -232
.debug_line -558
.debug_str -308
.debug_frame -40
With '= default', the compiler can do more inlining, hence the savings.
I intentionally omitted some opportunities for '= default', because they
would increase the Kernel size.
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
If we try to align a number above 0xfffff000 to the next multiple of
the page size (4 KiB), it would wrap around to 0. This is most likely
never what we want, so let's assert if that happens.
The enumeration code is already enumerating all buses, recursively
enumerating bridges (which are buses) makes devices on bridges being
enumerated multiple times. Also, the PCI code was incorrectly mixing up
terminology; let's settle down on bus, device and function because ever
since PCIe came along "slots" isn't really a thing anymore.
This was done with the help of several scripts, I dump them here to
easily find them later:
awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in
for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in)
do
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \;
done
# Remember to remove WRAPPER_GERNERATOR_DEBUG from the list.
awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
These changes are arbitrarily divided into multiple commits to make it
easier to find potentially introduced bugs with git bisect.Everything:
The modifications in this commit were automatically made using the
following command:
find . -name '*.cpp' -exec sed -i -E 's/dbg\(\) << ("[^"{]*");/dbgln\(\1\);/' {} \;
Compared to version 10 this fixes a bunch of formatting issues, mostly
around structs/classes with attributes like [[gnu::packed]], and
incorrect insertion of spaces in parameter types ("T &"/"T &&").
I also removed a bunch of // clang-format off/on and FIXME comments that
are no longer relevant - on the other hand it tried to destroy a couple of
neatly formatted comments, so I had to add some as well.
When enumerating the hardware using MMIO mode, it would attempt to
create a physical ID first. To create a physical ID, it needs to
retrieve the capabilities of the device.
When enumerating the first device, there would be no device
configuration space mappings. Access::get_capabilities_pointer
calls PCI::read16, which in turn goes to MMIOAccess::read16_field.
MMIOAccess::read16_field attempts to get a device configuration space
and fully expects to get one. However, since this is the first device,
there are none and it crashes with an m_has_value assertion failure.
This fixes this by creating the device configuration space mapping
before creating the physical ID.
Testing with VMware Player 16.1.0.
Such device is not an IRQHandler by itself, but actually a controller of
many IRQ or MSI devices. The purpose of this class is to manage multiple
sources of interrupts.
For example, a generic ISA IDE controller controls 2 IRQ sources - 14
and 15. So, when we initialize the IDE controller, it will initialize
two IDE channels (also known as PATAChannels) to utilize IRQ 14 and 15,
respectively. NVMe with MSI-X support can theoretically handle up to
2048 interrupts.
