As many macros as possible are moved to Macros.h, while the
macros to create a test case are moved to TestCase.h. TestCase is now
the only user-facing header for creating a test case. TestSuite and its
helpers have moved into a .cpp file. Instead of requiring a TEST_MAIN
macro to be instantiated into the test file, a TestMain.cpp file is
provided instead that will be linked against each test. This has the
side effect that, if we wanted to have test cases split across multiple
files, it's as simple as adding them all to the same executable.
The test main should be portable to kernel mode as well, so if
there's a set of tests that should be run in self-test mode in kernel
space, we can accomodate that.
A new serenity_test CMake function streamlines adding a new test with
arguments for the test source file, subdirectory under /usr/Tests to
install the test application and an optional list of libraries to link
against the test application. To accomodate future test where the
provided TestMain.cpp is not suitable (e.g. test-js), a CUSTOM_MAIN
parameter can be passed to the function to not link against the
boilerplate main function.
Using rsync is significantly faster when we're using an existing
image because we only have to copy files which are new or have
been updated. This cuts down the image creation time to about
a second or two assuming an old image exists.
This adds support for re-using and re-sizing existing disk images.
Disk images are checked with e2fsck prior to re-use and a new disk
image is automatically created when that check fails.
This adds support for detecting incorrect version numbers and links
in the ports list.
Also, unlike before it doesn't parse the package.sh script but executes
it instead which allows us to detect syntax errors.
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
This patch adds a basic Zsh completion script for the commands and
targets provided by Meta/serenity.sh. There's some room for improvement
here, e.g. we could provide completion for available CMake targets -
currently completion stops after serenity.sh <command> <target>.
You can enable it by adding this to your .zshrc before completions are
loaded:
fpath=($SERENITY_SOURCE_DIR/Meta/ShellCompletions/zsh $fpath)
Until we get the goodness that C++ modules are supposed to be, let's try
to shave off some parse time using precompiled headers.
This commit only adds some very common AK headers, only to binaries,
libraries and the kernel (tests are not covered due to incompatibility
with AK/TestSuite.h).
This option is on by default, but can be disabled by passing
`-DPRECOMPILE_COMMON_HEADERS=OFF` to cmake, which will disable all
header precompilations.
This makes the build about 30 seconds faster on my machine (about 7%).
Move LibCompress unit tests to LibCompress/Tests directory and register
them with CMake's add_test. This allows us to run these tests with
ninja test instead of running a separate executable.
Also split the existing tests in 3 test files that better follow the
source code structure (inspired by AK tests).
This was brought up as something that would be useful by
`RealKC` on the discord, and I happened to agree that it
would be useful. Especially given the abundance of Toolchain
changes recently.
The only icons we are currently warning about are designed
and rendered as small icons intentionally, as their only use
is in desktop applets, and thus are exempt to this rule.
This reduces build spam back down to a minimum.
I should have just done this in the first place, back in #4729
This is a very basic implementation that only requests 4096 bytes
of entropy from the host once, but its still high quality entropy
so it should be a good fix for #4490 (boot-time entropy starvation)
for virtualized environments.
Co-authored-by: Sahan <sahan.h.fernando@gmail.com>
This commit includes a lot of small changes and additions needed to
finalize the base implementation of VirtIOQueues and VirtDevices:
* The device specific driver implementation now has to handle setting
up the queues it needs before letting the base device class know it
finised initialization
* Supplying buffers to VirtQueues is now done via ScatterGatherLists
instead of arbitary buffer pointers - this ensures the pointers are
physical and allows us to follow the specification in regards to the
requirement that individual descriptors must point to physically
contiguous buffers. This can be further improved in the future by
implementating support for the Indirect-Descriptors feature (as
defined by the specification) to reduce descriptor usage for very
fragmented buffers.
* When supplying buffers to a VirtQueue the driver must supply a
(temporarily-)unique token (usually the supplied buffer's virtual
address) to ensure the driver can discern which buffer has finished
processing by the device in the case in which the device does not
offer the F_IN_ORDER feature.
* Device drivers now handle queue updates (supplied buffers being
returned from the device) by implementing a single pure virtual
method instead of setting a seperate callback for each queue
* Two new VirtQueue methods were added to allow the device driver
to either discard or get used/returned buffers from the device by
cleanly removing them off the descriptor chain (This also allows
the VirtQueue implementation to reuse those freed descriptors)
This also includes the necessary changes to the VirtIOConsole
implementation to match these interface changes.
Co-authored-by: Sahan <sahan.h.fernando@gmail.com>
This patch allocates a physical page for each of the virtqueues and
memcpys to it when receiving a buffer to get a physical, aligned
contiguous buffer as required by the virtio specification.
Co-authored-by: Sahan <sahan.h.fernando@gmail.com>
Based on pull #3236 by tomuta, this adds helper methods for generic
device initialization, and partily-broken virtqueue helper methods
Co-authored-by: Tom <tomut@yahoo.com>
Co-authored-by: Sahan <sahan.h.fernando@gmail.com>
This change fixes two bugs:
1) If you run `serenity.sh` outside of your serenity git clone, the
`get_top_dir()` function won't be able to auto detect the serenity
root dir and we'll error out. By allowing the script to use an
existing $SERENITY_ROOT vlaue if it exists, we can solve
this problem.
2) If tried to run a command which ends up calling `build_toolchain()`
and you were outside of the root of the project, it should just
fail. Fix this by utilizing `$SERENITY_ROOT`.
I have this symlinked into ~/bin, when looking at the help/usage
it would previously print the fully qualified path to the script
making the help very difficult to read.
install-ports copys the necessary files from Ports/ to /usr/Ports. Also
refactor the compiler and destiation variables from .port_include.sh
into .hosted_defs.sh. .hosted_defs.sh does not exists when ports are
built in serenity
The end goal of this commit is to allow to boot on bare metal with no
PS/2 device connected to the system. It turned out that the original
code relied on the existence of the PS/2 keyboard, so VirtualConsole
called it even though ACPI indicated the there's no i8042 controller on
my real machine because I didn't plug any PS/2 device.
The code is much more flexible, so adding HID support for other type of
hardware (e.g. USB HID) could be much simpler.
Briefly describing the change, we have a new singleton called
HIDManagement, which is responsible to initialize the i8042 controller
if exists, and to enumerate its devices. I also abstracted a bit
things, so now every Human interface device is represented with the
HIDDevice class. Then, there are 2 types of it - the MouseDevice and
KeyboardDevice classes; both are responsible to handle the interface in
the DevFS.
PS2KeyboardDevice, PS2MouseDevice and VMWareMouseDevice classes are
responsible for handling the hardware-specific interface they are
assigned to. Therefore, they are inheriting from the IRQHandler class.
Almost a year after first working on this, it's finally done: an
implementation of Promises for LibJS! :^)
The core functionality is working and closely following the spec [1].
I mostly took the pseudo code and transformed it into C++ - if you read
and understand it, you will know how the spec implements Promises; and
if you read the spec first, the code will look very familiar.
Implemented functions are:
- Promise() constructor
- Promise.prototype.then()
- Promise.prototype.catch()
- Promise.prototype.finally()
- Promise.resolve()
- Promise.reject()
For the tests I added a new function to test-js's global object,
runQueuedPromiseJobs(), which calls vm.run_queued_promise_jobs().
By design, queued jobs normally only run after the script was fully
executed, making it improssible to test handlers in individual test()
calls by default [2].
Subsequent commits include integrations into LibWeb and js(1) -
pretty-printing, running queued promise jobs when necessary.
This has an unusual amount of dbgln() statements, all hidden behind the
PROMISE_DEBUG flag - I'm leaving them in for now as they've been very
useful while debugging this, things can get quite complex with so many
asynchronously executed functions.
I've not extensively explored use of these APIs for promise-based
functionality in LibWeb (fetch(), Notification.requestPermission()
etc.), but we'll get there in due time.
[1]: https://tc39.es/ecma262/#sec-promise-objects
[2]: https://tc39.es/ecma262/#sec-jobs-and-job-queues
This utility traces the route packets take to a user specified host.
QEMU user networking (the type of networking we currently have setup)
does not support sending "real" raw IPv4 packets, and as such we cant
specify a custom TTL value. As a result, this utility will only work
on real hardware, qemu setup with tun networking (requires root) and
other hypervisors that support bridged adapters (VirtualBox/VMWare).
Running the tests will be moved to a separate test command which can
then leverage the availability of different targets and run either unit
tests on the host or the image in QEMU in self-test mode. :^)
- Only call ensure_toolchain for non-lagom targets
- Use host addr2line, we can't expect the i686 toolchain's addr2line to
support the host's binary executable format
- Don't export SERENITY_ARCH and TOOLCHAIN_DIR, don't need them anymore
