Before of this patch, we supported two methods to address a boot device:
1. Specifying root=/dev/hdXY, where X is a-z letter which corresponds to
a boot device, and Y as number from 1 to 16, to indicate the partition
number, which can be omitted to instruct the kernel to use a raw device
rather than a partition on a raw device.
2. Specifying root=PARTUUID: with a GUID string of a GUID partition. In
case of existing storage device with GPT partitions, this is most likely
the safest option to ensure booting from persistent storage.
While option 2 is more advanced and reliable, the first option has 2
caveats:
1. The string prefix "/dev/hd" doesn't mean anything beside a convention
on Linux installations, that was taken into use in Serenity. In Serenity
we don't mount DevTmpFS before we mount the boot device on /, so the
kernel doesn't really access /dev anyway, so this convention is only a
big misleading relic that can easily make the user to assume we access
/dev early on boot.
2. This convention although resemble the simple linux convention, is
quite limited in specifying a correct boot device across hardware setup
changes, so option 2 was recommended to ensure the system is always
bootable.
With these caveats in mind, this commit tries to fix the problem with
adding more addressing options as well as to remove the first option
being mentioned above of addressing.
To sum it up, there are 4 addressing options:
1. Hardware relative address - Each instance of StorageController is
assigned with a index number relative to the type of hardware it handles
which makes it possible to address storage devices with a prefix of the
commandset ("ata" for ATA, "nvme" for NVMe, "ramdisk" for Plain memory),
and then the number for the parent controller relative hardware index,
another number LUN target_id, and a third number for LUN disk_id.
2. LUN address - Similar to the previous option, but instead we rely on
the parent controller absolute index for the first number.
3. Block device major and minor numbers - by specifying the major and
minor numbers, the kernel can simply try to get the corresponding block
device and use it as the boot device.
4. GUID string, in the same fashion like before, so the user use the
"PARTUUID:" string prefix and add the GUID of the GPT partition.
For the new address modes 1 and 2, the user can choose to also specify a
partition out of the selected boot device. To do that, the user needs to
append the semicolon character and then add the string "partX" where X
is to be changed for the partition number. We start counting from 0, and
therefore the first partition number is 0 and not 1 in the kernel boot
argument.
This reworks the way the UHCI schedule is set up to handle interrupt
transfers, creating 11 queue heads each assigned a different
period/latency, so that interrupt transfers can be linked into the
schedule with their specified period more easily.
Modifies the way the UHCI schedule is set up & modified to allow for
multiple transfers of the same type, from one or more devices, to be
queued up and handled simultaneously.
Otherwise we would be holding the MM global data lock and the Process
address space locks in reversed order to the rest of the system, which
can lead to deadlocks.
This is a left-over from back when we didn't have any locking on the
global Process list, nor did we have SMP support, so this acted as some
kind of locking mechanism. We now have proper locks around the Process
list, so this is no longer relevant.
Change the name of set_serial_debug(bool on_or_off) to
set_serial_debug_enabled(bool desired_state). This is to make the names
more expressive and less unclear as to what the function does, as it
only sets the enabled state.
Likewise, change the name of get_serial_debug() to
is_serial_debug_enabled() in order to make clear from the name that
this is simply the state of s_serial_debug_enabled.
Change the name of serial_debug to s_serial_debug_enabled since this is
a static bool describing this state.
Finally, change the signature of set_serial_debug_enabled to return a
bool, as this is more logical and understandable.
Now that the Spinlock code is not dependent on architectural specific
code anymore, we can move it back to the Locking folder. This also means
that the Spinlock implemenation is now used for the aarch64 kernel.
This commit updates the lock function from Spinlock and
RecursiveSpinlock to return the InterruptsState of the processor,
instead of the processor flags. The unlock functions would only look at
the interrupt flag of the processor flags, so we now use the
InterruptsState enum to clarify the intent, and such that we can use the
same Spinlock code for the aarch64 build.
To not break the build, all the call sites are updated aswell.
This commit adds the concept of an InterruptsState to the kernel. This
will be used to make the Spinlock code architecture independent. A new
Processor.cpp file is added such that we don't have to duplicate the
code.
Globally shared MemoryManager state is now kept in a GlobalData struct
and wrapped in SpinlockProtected.
A small set of members are left outside the GlobalData struct as they
are only set during boot initialization, and then remain constant.
This allows us to access those members without taking any locks.
I believe this to be safe, as the main thing that LockRefPtr provides
over RefPtr is safe copying from a shared LockRefPtr instance. I've
inspected the uses of RefPtr<PhysicalPage> and it seems they're all
guarded by external locking. Some of it is less obvious, but this is
an area where we're making continuous headway.
We're not accessing any of the MM members here. Also remove some
redundant code to update CR3, since it calls activate_page_directory()
which does exactly the same thing.
Now that AddressSpace itself is always SpinlockProtected, we don't
need to also wrap the RegionTree. Whoever has the AddressSpace locked
is free to poke around its tree.
This allows sys$mprotect() to honor the original readable & writable
flags of the open file description as they were at the point we did the
original sys$mmap().
IIUC, this is what Dr. POSIX wants us to do:
https://pubs.opengroup.org/onlinepubs/9699919799/functions/mprotect.html
Also, remove the bogus and racy "W^X" checking we did against mappings
based on their current inode metadata. If we want to do this, we can do
it properly. For now, it was not only racy, but also did blocking I/O
while holding a spinlock.
Before this change, we had File::mmap() which did all the work of
setting up a VMObject, and then creating a Region in the current
process's address space.
This patch simplifies the interface by removing the region part.
Files now only have to return a suitable VMObject from
vmobject_for_mmap(), and then sys$mmap() itself will take care of
actually mapping it into the address space.
This fixes an issue where we'd try to block on I/O (for inode metadata
lookup) while holding the address space spinlock. It also reduces time
spent holding the address space lock.
This forces anyone who wants to look into and/or manipulate an address
space to lock it. And this replaces the previous, more flimsy, manual
spinlock use.
Note that pointers *into* the address space are not safe to use after
you unlock the space. We've got many issues like this, and we'll have
to track those down as wlel.
We were holding the MM lock across all of the region unmapping code.
This was previously necessary since the quickmaps used during unmapping
required holding the MM lock.
Now that it's no longer necessary, we can leave the MM lock alone here.
This makes locking them much more straightforward, and we can remove
a bunch of confusing use of AddressSpace::m_lock. That lock will also
be converted to use of SpinlockProtected in a subsequent patch.
By default these 2 fields were zero, which made it rely on
implementation defined behavior whether these fields internally would be
set to the correct value. The ARM processor in the Raspberry PI (and
QEMU 6.x) would actually fixup these values, whereas QEMU 7.x now does
not do that anymore, and a translation fault would be generated instead.
For more context see the relevant QEMU issue:
- https://gitlab.com/qemu-project/qemu/-/issues/1157Fixes#14856
Boot profiling was previously broken due to init_stage2() passing the
event mask to sys$profiling_enable() via kernel pointer, but a user
pointer is expected.
To fix this, I added Process::profiling_enable() as an alternative to
Process::sys$profiling_enable which takes a u64 rather than a
Userspace<u64 const*>. It's a bit of a hack, but it works.
You're still required to disable interrupts though, as the mappings are
per-CPU. This exposed the fact that our CR3 lookup map is insufficiently
protected (but we'll address that in a separate commit.)
While the "regular" quickmap (used to temporarily map a physical page
at a known address for quick access) has been per-CPU for a while,
we also have the PD (page directory) and PT (page table) quickmaps
used by the memory management code to edit page tables. These have been
global, which meant that SMP systems had to keep fighting over them.
This patch makes *all* quickmaps per-CPU. We reserve virtual addresses
for up to 64 CPUs worth of quickmaps for now.
Note that all quickmaps are still protected by the MM lock, and we'll
have to fix that too, before seeing any real throughput improvements.
Instead of having three separate APIs (one for each timestamp),
there's now only Inode::update_timestamps() and it takes 3x optional
timestamps. The non-empty timestamps are updated while holding the inode
mutex, and the outside world no longer has to look at intermediate
timestamp states.
Instead of temporary changing the open file description's "blocking"
flag while doing a non-waiting recvfrom, we instead plumb the currently
wanted blocking behavior all the way through to the underlying socket.
