By not clearing the buffer, we were leaking the path part of a URL into
the query for URLs without an authority component (no '//host').
This could be seen most noticeably in mailto: URLs with header fields
set, as the query part of `mailto:user@example.com?subject=test` was
parsed to `user@example.comsubject=test`.
data: URLs didn't have this problem, because we have a special case for
parsing them.
This is defined in the spec, but was missing in our table. Fix this, and
add a spec comment for what is missing. Also begin a basic text based
test for URL, so we can get some coverage of LibWeb's usage of URL too.
This takes the previous alternation optimisation and applies it to all
the alternation blocks instead of just the few instructions at the
start.
By generating a trie of instructions, all logically equivalent
instructions will be consolidated into a single node, allowing the
engine to avoid checking the same thing multiple times.
For instance, given the pattern /abc|ac|ab/, this optimisation would
generate the following tree:
- a
| - b
| | - c
| | | - <accept>
| | - <accept>
| - c
| | - <accept>
which will attempt to match 'a' or 'b' only once, and would also limit
the number of backtrackings performed in case alternatives fails to
match.
This optimisation is currently gated behind a simple cost model that
estimates the number of instructions generated, which is pessimistic for
small patterns, though the change in performance in such patterns is not
particularly large.
Similar to floor and ceil, we were forcing the values to be doubles here
Also adds a big FIXME about my findings trying to add a general
implementation for these
Both GCC and Clang inline this function to use bit-wise logic and/or
appropriate instructions even on -O0 and allow their use in a constexpr
context, see
https://godbolt.org/z/de1393vha
In order to follow spec text to achieve this, we need to change the
underlying representation of a host in AK::URL to deserialized format.
Before this, we were parsing the host and then immediately serializing
it again.
Making that change resulted in a whole bunch of fallout.
After this change, callers can access the serialized data through
this concept-host-serializer. The functional end result of this
change is that IPv6 hosts are now correctly serialized to be
surrounded with '[' and ']'.
This implementation will allow us to fix serialization of IPv6
addresses not being surrounded by '[' and ']'.
Nothing is calling this function yet - this will come in the next
(larger) commit where the underlying host representation inside of
AK::URL is changed from DeprecatedString to URL::Host.
This doesn't seem trivial enough to be defining in the header like this,
and should not be a performance critical function anyhow.
Also add spec comments while we are at it, and a FIXME since we do not
seem to exactly align.
And use them where applicable. This will allow us to store the host in
the deserialized format as the spec specifies.
Ideally these typdefs would instead be the existing AK interfaces, but
in the meantime, we can just use this.
These methods are slightly more convenient than storing the Bytes
separately. However, it it feels unsanitary to reach in and access this
data directly. Both of the users of these already have the
[Readonly]Bytes available in their constructors, and can easily avoid
using these methods, so let's remove them entirely.
Due to overload resolutions rules, this simple code provokes a crash:
ReadonlyBytes readonly_bytes{};
FixedMemoryStream stream{readonly_bytes};
ReadonlyBytes give_them_back{stream.bytes()};
// -> Panics on VERIFY(m_writing_enabled);
// but this is fine:
auto bytes = static_cast<FixedMemoryStream const&>(*stream).bytes()
If we need to be explicit about it, let's rename the overload instead of
adding that `static_cast`.
I misunderstood the spec step for checking whether the host 'ends with a
number'. We can't simply check for it if ends with a number, this check
is actually an algorithm which is required to avoid detecting hosts that
end with a number from an IPv4 host.
Implement this missing step, and add a test to cover this.
clamp_to_int clamps value to valid range of int values so resulting
value does not overflow.
It is going to be used to clamp float or double values to int that
represents fixed-point value of CSSPixels.
This reverts commit d48c68cf3f.
Unfortunately, this currently copies some warn() invocations that we do
*not* want in the debug console, such as test-js's use of OSC command 9
to report progress.
This is just a straight (and fairly inefficient) implementation of IPv6
parsing and serialization from the URL spec.
Note that we don't use AK::IPv6Address here because the URL spec
requires a specific serialization behavior.
The array which contains the actual parameters is always located
immediately after the base `TypeErasedFormatParams` object of
`VariadicFormatParams`. Hence, storing a pointer to it inside a `Span`
is redundant. Changing it to a zero-length array saves 8 bytes.
Secondly, we limit the number of parameters to 256, so `m_size` and
`m_next_index` can be stored in a smaller data type than `size_t`,
saving us another 8 bytes.
This decreases the size of a single-element `VariadicFormatParams` from
48 to 32 bytes, thus reducing the code size overhead of setting up
parameters for `dbgln()`.
Note that [arrays of length zero][1] are a GNU extension, but it's used
elsewhere in the codebase already and is explicitly supported by Clang
and GCC.
[1]: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Xcode 15 betas 1-3 lack https://reviews.llvm.org/D135772, which fixes a
bug that causes trailing `requires` clauses to be evaluated twice,
failing the second time. Reported as FB12284201.
This caused compile errors when instantiating types derived from RefPtr:
> error: invalid reference to function 'NonnullRefPtr': constraints not
> satisfied
> note: because substituted constraint expression is ill-formed: value
> of type '<dependent type>' is not contextually convertible to 'bool'.
This commit works around the issue by moving the `requires` clauses
after the template parameter list.
In most cases, trailing `requires` clauses and those specified after the
template parameter list work identically, so this change should not
impact the code's behavior. The only difference is that trailing
requires clauses are evaluated *after* constrained placeholder types
(i.e. `Integral auto i` function parameter).
All elements of the vector were moved to the left, for each element to
remove. This patch makes the function move each element exactly once.
On the same test case as the previous commit, it makes the function
disappear from the profile. These two commits combined reduce the
decompression time by 12%.
As confusing as it may sound, reusing them is terrible performance wise.
When profiling the PNG decoder, the result (which is dominated by the
Zlib decompression) shows that the `cleanup_unused_chunks()` function
represented 14.26% of the profile before this patch and only 7.7%
afterward.
On a 6.5 MB PNG image, it reduces the decompression time by more than
5%.
This uses one of Sun OS's algorithms, for a comparison to other
algorithms please refer to
https://gist.github.com/Hendiadyoin1/f58346d66637deb9156ef360aa158bf9
This is used on aarch64 builds and for x86 floats and doubles
for performance gains check
https://quick-bench.com/q/_2jTykshP6cUqtgdepFaoQ53YC8
which shows approximately 2x gains
Co-Authored-By: Ben Wiederhake <BenWiederhake.GitHub@gmx.de>
Co-Authored-By: kleines Filmröllchen <filmroellchen@serenityos.org>
Co-Authored-By: Dan Klishch <danilklishch@gmail.com>
This now searches the memory in blocks, which should be slightly more
efficient. However, it doesn't make much difference (e.g. ~1% in LZMA
compression) in most real-world applications, as the non-hint function
is more expensive by orders of magnitude.
This factors out a lot of complicated math into somewhat understandable
functions.
While at it, rename `next_read_span_with_seekback` to
`next_seekback_span` to keep the naming consistent and to avoid making
function names any longer.
The "operation modes" of this function have very different focuses, and
trying to combine both in a way where we share the most amount of code
probably results in the worst performance.
Instead, split up the function into "existing distances" and "no
existing distances" so that we can optimize either case separately.
We will be adding extra logic to the CircularBuffer to optimize
searching, but this would negatively impact the performance of
CircularBuffer users that don't need that functionality.
By golly, this is a lot more spec comments than I originally thought
I would need to do! This has exposed some bugs in the implementation,
as well as a whole lot of things which we are yet to implement.
No functional changes intended in this commit (already pretty large
as is!).
ECMA-262 implies that `MIN_VALUE` should be a denormalized value if
denormal arithmetic is supported. This is the case on x86-64 and AArch64
using standard GCC/Clang compilation settings.
test262 checks whether `Number.MIN_VALUE / 2.0` is equal to 0, which
only holds if `MIN_VALUE` is the smallest denormalized value.
This commit renames the existing `NumericLimits<FloatingPoint>::min()`
to `min_normal()` and adds a `min_denormal()` method to force users to
explicitly think about which one is appropriate for their use case. We
shouldn't follow the STL's confusingly designed interface in this
regard.
Instead of checking the address of a temporary, grab the address of the
current frame pointer to determine how much memory is left on the stack.
This better communicates to the compiler what we're trying to do, and
resolves some crashes with ASAN in test-js while the option
detect_stack_use_after_return is turned on.
This was missed in 02b74e5a70
We need to disable consteval in AK::String as well as AK::StringView,
and we need to disable it when building both the tools build and the
fuzzer build.
These recursive templates have a measurable impact on the compile speed
of Variant-heavy code like LibWeb. Using these builtins leads to a 2.5%
speedup for the measured compilation units.
oss-fuzz ships a pre-release commit of clang-15 for all of their build
bots. Until they update to a release of clang-15 that includes the fix
for this bug, or a later release, we need to keep the workaround in
place.
The Windows CRT definition of assert() is not noreturn, and causes
compile errors when using it as the backing for VERIFY() in debug
configurations of applications like the Jakt compiler.
Apple Clang 14.0.3 (Xcode 14.3) miscompiles this builtin on AArch64,
causing the borrow flag to be set incorrectly. I have added a detailed
writeup on Qemu's issue tracker, where the same issue led to a hang when
emulating x86:
https://gitlab.com/qemu-project/qemu/-/issues/1659#note_1408275831
I don't know of any specific issue caused by this on Lagom, but better
safe than sorry.
GCC 14 (https://gcc.gnu.org/g:2b4e0415ad664cdb3ce87d1f7eee5ca26911a05b)
has added support for the previously Clang-specific add/subtract with
borrow builtins. Let's use `__has_builtin` to detect them instead of
assuming that only Clang has them. We should prefer these to the
x86-specific ones as architecture-independent middle-end optimizations
might deal with them better.
As an added bonus, this significantly improves codegen on AArch64
compared to the fallback implementation that uses
`__builtin_{add,sub}_overflow`.
For now, the code path with the x86-specific intrinsics stays so as to
avoid regressing the performance of builds with GCC 12 and 13.
The previous version had a sequence of calls that are likely not
optimized out, while this version is strictly a sequence of static type
conversion which are always fully optimized out.
The previous alignment would always resolve to 8-bytes, which is below
the required alignments of types that could exist in userspace (long
double, 128-bit integers, SSE, etc).
The FileSlash state was erroneously copying the base URL host, instead
of the base URL path excluding the last path component. This resulted in
invalid file URLs.
Calling `from_utf8` with a DeprecatedString will hide the fact that we
have a DeprecatedString, while using `from_deprecated_string` with a
StringView will silently and needlessly allocate a DeprecatedString,
so let's forbid that.
This does a few things:
- The decoder uses a 32- or 64-bit integer as a reservoir of the data
being decoded, rather than one single byte as it was previously.
- `read_bool()` only refills the reservoir (value) when the size drops
below one byte. Previously, it would read out a bit-sized range from
the data to completely refill the 8-bit value, doing much more work
than necessary for each individual read.
- VP9-specific code for reading the marker bit was moved to its own
function in Context.h.
- A debug flag `VPX_DEBUG` was added to optionally enable checking of
the final bits in a VPX ranged arithmetic decode and ensure that it
contains all zeroes. These zeroes are a bitstream requirement for
VP9, and are also present for all our lossy WebP test inputs
currently. This can be useful to test whether all the data present in
the range has been consumed.
A lot of the size of this diff comes from the removal of error handling
from all the range decoder reads in LibVideo/VP9 and LibGfx/WebP (VP8),
since it is now checked only at the end of the range.
In a benchmark decoding `Tests/LibGfx/test-inputs/4.webp`, decode times
are improved by about 22.8%, reducing average runtime from 35.5ms±1.1ms
down to 27.4±1.1ms.
This should cause no behavioral changes.
Change the name and return type of
`IPv6Address::to_deprecated_string()` to `IPv6Address::to_string()`
with return type `ErrorOr<String>`.
It will now propagate errors that occur when writing to the
StringBuilder.
There are two users of `to_deprecated_string()` that now use
`to_string()`:
1. `Formatted<IPv6Address>`: it now propagates errors.
2. `inet_ntop`: it now sets errno to ENOMEM and returns.
This has KString, KBuffer, DoubleBuffer, KBufferBuilder, IOWindow,
UserOrKernelBuffer and ScopedCritical classes being moved to the
Kernel/Library subdirectory.
Also, move the panic and assertions handling code to that directory.