Two bugs:
1. Correctly set bits in VP8X header.
Turns out these were set in the wrong order.
2. Correctly set the `has_alpha` flag.
Also add a test for writing webp files with icc data. With the
additional checks in other commits in this PR, this test catches
the bug in WebPWriter.
Rearrange some existing functions to make it easier to write this test:
* Extract encode_bitmap() from get_roundtrip_bitmap().
encode_bitmap() allows passing extra_args that the test uses to pass
in ICC data.
* Extract expect_bitmaps_equal() from test_roundtrip()
If this turns out to be too strict in practice, we can replace it with
a `dbgln("VP8X and VP8L headers disagree about alpha; ignoring VP8X");`
instead.
ALso update catdog-alert-13-alpha-used-false.webp to not trigger this.
I had manually changed the VP8L alpha flag at offset 0x2a in
da48238fbd to clear it, but I hadn't changed the VP8X flag.
This changes the byte at offset 0x14 from 0x10 (has_alpha) to 0x00
(no alpha) as well, to match.
Explicit template arguments must be wrapped in parens,
else they confuse the preprocessor.
Add the parens instead of avoiding the use of explicit template
arguments.
No behavior change.
Bilevel images are not required to have a BitsPerSample or a
SamplesPerPixel tag, while this is unusual these images are still valid.
The test case has been generated by first making a copy of
ccitt3_1d_fill.tiff and then, using `tiffset` to remove both tags:
tiffset -u 258 ccitt3_no_tags.tiff
tiffset -u 277 ccitt3_no_tags.tiff
The spec isn't _super_ clear on how this is meant to be done, but the
way I understand this is that we should simply clamp the returned
'current value' between 'min' and 'max'.
Firefox does not appear to do this clamping, but Chrome does.
This is a simple getter and setter of the OscillatorType enum, with
error checking to not allow 'custom', as that should only be changed
through 'setPeriodicWave()'.
This is still missing a bunch of spec steps to construct the
audio node based on the parameters of the OscillatorNode, but it is at
least enough to construct an object to be able to add a basic test which
can get built upon as more is implemented.
Previously, we would apply any adopted style sheet to the document if
its alternate flag was not set. This meant that all adopted style
sheets would be applied, since constructed style sheets never have this
flag set.
...and add a test case that shows why it's incorrect.
If one dimension is 2^n + 1 and the other side is just 1, then the
topmost node will have 2^n x 1 and 1 x 1 children. The first child will
have n levels of children. The 1 x 1 child could end immediately, or it
could require that it also has n levels of (all 1 x 1) children. The
spec isn't clear on which of the two alternatives should happen. We
currently have n levels of 1 x 1 blocks.
This test case shows that a VERIFY we had was incorrect, so remove it.
The alternative implementation is to keep the VERIFY and to add a
if (x_count == 1 && y_count == 1)
level = 0;
to the top of TagTreeNode::create(). Then we don't have multiple levels
of 1 x 1 nodes, and we need to read fewer bits.
The images in the spec suggest that all nodes should have the same
number of levels, so go with that interpretation for now. Once we can
actually decode images, we'll hopefully see which of the two
interpretations is correct.
(The removed VERIFY() is hit when decoding
Tests/LibGfx/test-inputs/jpeg2000/buggie-gray.jpf in a local branch that
has some image decoding implemented. That file contains a packet with
1x3 code-blocks, which hits this case.)
The main difference was that our implementation was writing
the final line of a series of repeated lines, whereas the
spec says "The second and succeeding copies of repeated adjacent
input lines shall not be written."
Additionally, there was a mistake in the -f flag implementation
causing the number of fields skipped to be one greater than
required.
Flags that rely on counting lines (-c and -d) were
producing results that were off by one. This is fixed
by initializing the `count` variable to 1, which is
consistent with behavior in the main loop, where it
is reset to 1 when lines don't match.
Calls to `read_line` are replaced with `read_line_with_resize`
and `swap`s of StringViews, which assume a consistent location
of the underlying ByteBuffers, are replaced. A test file has
been added for uniq, which includes a test case for long lines.
`ceil_div(-1, 2)` used to return -1.
Now it returns 0, which is the correct ceil(-0.5).
(C++'s division semantics have floor semantics for numbers > 0,
but ceil semantics for numbers < 0.)
This will be important for the JPEG2000 decoder eventually.
Previously, [Global] interfaces were not excluded from the
`internal_own_property_keys()` call. This caused a crash when iterating
over the properties of the Window object.
Fixes bug when CSS transform is applied twice to clip rect:
- While calculating absolute clip rectangles in `refresh_clip_state()`
- While executing `PushStackingContext` painting command.
Duplicated transform is already removed for PaintableBox and this change
adds this for InlinePaintable.
Previously we would look for a matching ID, and then for a matching
name. If there was an element in the collection which had a matching ID
as well as an element with a matching name, we would always return the
element with a matching ID irrespective of what order that element was
in.
Otherwise, the thread will continue to run and access the media data
buffer, which will have been freed.
The test here is a bit strange, but the issue would only consistently
repro after several GC runs.
Fixes crashing after following steps:
1. Open https://github.com/SerenityOS/serenity
2. Click on "Pull requests" tab
The problem was `navigable` null pointer dereferencing in
`decode_favicon()`. But navigable is null because the document was
created by `parseFromString()` DOMParser API.
With this change we skip fetching initiated by HTMLLinkElement if
document does not have a browsing context:
- Favicon is not displayed for such documents so no need to fetch.
- Stylesheets fetching won't affect such document because style or
layout does not run for them.
The following command was used to clang-format these files:
clang-format-18 -i $(find . \
-not \( -path "./\.*" -prune \) \
-not \( -path "./Base/*" -prune \) \
-not \( -path "./Build/*" -prune \) \
-not \( -path "./Toolchain/*" -prune \) \
-not \( -path "./Ports/*" -prune \) \
-type f -name "*.cpp" -o -name "*.mm" -o -name "*.h")
There are a couple of weird cases where clang-format now thinks that a
pointer access in an initializer list, e.g. `m_member(ptr->foo)`, is a
lambda return statement, and it puts spaces around the `->`.
Whenever the floating-point values are in integer range, we can use the
various FCVT functions with static rounding mode to perform fast
rounding. I took this opportunity to clean up the architecture
differentiation for these functions, which allows us to use the software
rounding implementation for all extreme and unimplemented cases,
including AArch64.
Also adds more round & trunc tests.
The HTMLLinkElement caller is a bit hairy, so we shove an await() in
there temporarily. This is sure to cause fun times for anyone debugging
task/microtask execution order.
We have to unregister link element stylesheets from the old document's
StyleSheetList when moving them into a new document.
This makes it possible to load GitHub contributor graphs. :^)
We can't rely on Element.setAttribute() in cloneNode() since that will
throw on weird attribute names. Instead, just follow the spec and copy
attributes into cloned elements verbatim.
This fixes a crash when loading the "issues" tab on GitHub repos.
They are actually sending us unintentionally broken markup, but we
should still support cloning it. :^)
Seems like a specification bug, but other browsers update url before
popstate event is fired and so should we.
Fixes back/forward navigation on GitHub.
These changes allow lines of arbitrary length to be read with
BufferedStream. When the user supplied buffer is smaller than
the line, it will be resized to fit the line. When the internal
buffer in BufferedStream is smaller than the line, it will be
read into the user supplied buffer chunk by chunk with the
buffer growing accordingly.
Other behaviors match the behavior of the existing read_line method.
Part 1 of this test uses a large array so we are more likely getting
segfaults when using an incorrect TLS layout.
The `volatile`s and `taint_for_optimiter`s should hopefully prevent the
compiler from optimizing the tests out.
This tests reading JPEG2000 codestreams that aren't embedded in
the ISOBMFF wrapper. It's also useful for debugging bitstream
internals, since the spec lists expected output for many internal
intermediate results.
This fixes a regression on Acid3, since we are not expected to "best
effort" parse XML. The test specifically checks that you don't create an
incomplete, incorrect DOM.
This line changes padding top to align cell content to baseline:
`cell.padding_top += m_rows[cell.row_index].baseline - cell.baseline`
Which means available for distribution height `height_diff` could have
changed so it needs to be refreshed before assigning the rest of it to
padding bottom:
`cell_state.padding_bottom += height_diff;`
Fixes https://github.com/SerenityOS/serenity/issues/22032
When loading an XML resource into an iframe and the resource fails to
decode (e.g due to invalid UTF-8), we must still fire a load event.
This fixes the regression in subtest 69 of Acid3.
Navigation should not run for <object> element until it is inserted into
a document. Spec deoes not seem to explicitely say that, but that
matches other browsers behavior.
Fixes hanging after reloading in Acid3 test.
There were two things going wrong here:
- Transformed text (via CSS text-transform) was not invalidated after a
`@media` rule changed state.
- Removing the `style` attribute from an element didn't trigger a style
update.
This fixes the regression in subtest 46 of Acid3.
Fixes#21777
Some really cursed servers simply drop the TCP socket on the floor when
they're trying to close an HTTP connection going through a TLS socket.
This commit makes LibTLS tolerate these silly servers, and LibHTTP
accept their idea of "EOF == connection closed".
Fixes loading wpt.live/acid/acid3/test.html.
Note that this means TLSv12::on_ready_to_read can fire with an empty
buffer signifying EOF; one test refused this behaviour, and has been
changed in this commit.
As a layout test, this verifies that the fallback attr() substitution
results in the expected layout node. For example, the fallback content
for a `string` attribute type should create a text node.
I haven't found this being mentioned in the current spec, but that is
what chromium (atm the only other Navigation API implementer) does.
Fixes crashing when location.hash is changed subsequently more than once
using JS.
Previously, the parent CSS stylesheet, owner node and owner CSS rule
properties were not unset when removing a sheet from a StyleSheetList.
This change moves the methods for adding and removing sheets to and
from a StyleSheetList, directly into the StyleSheetList class and
ensures they are called as required by the CSSOM specification.
A tag tree is a data structure used for deserializing JPEG2000
packet headers.
We don't use them for anything yet, except from tests.
The implementation feels a bit awkward to me, but we can always polish
it later.
The spec thankfully includes two concrete examples. The code is
correct enough to pass those -- I added them as test.
Previously, calling fetch with a signal object provided by
`AbortSignal.timeout()` would cause a crash when the signal timed out.
We now push a `TemporaryExecutionContext` to the stack when we invoke
the signal's abort steps, as an execution context is required when
calling native functions.
This change adds the `captureEvents()` and `releaseEvents()` methods to
the window object. These methods are obsolete, but are still included
in the HTML specification, which says they must do nothing.
This change adds the `clear()`, `captureEvents()` and `releaseEvents()`
methods to the document object. These methods are obsolete, but are
still included in the HTML specification, which says they must do
nothing.
PaintFrame is not primitive painting command, we inherited from OS, that
is hard to replicate in GPU-painter or alternative CPU-painter API. We
should remove it as a part of refactoring towards simplifying recording
painter commands set.
Fixes: #23796
See spec issue https://github.com/whatwg/html/issues/9869
Previous attempt on fixing reload had to be reverted because it broke
Soundcloud and GitHub, but this change does not seem to introduce new
crashes.
There was no need to set an available height constraint when doing early
height calculation for inline-flex boxes. It created a situation where
the flex containers could wrongly get zero height early, and then
resolve percentages against zero instead of the real intrinsic size.
Fixes#23942
It does fetching and uses parseFromString() DOMParser API in the fetch
callback. Following steps end up hanging before reverting
664611bae4:
1. Do fetching initiated by fetch() js call.
2. Invoke fetch callback on networking task source
3. Fetch callback does parseFromString()
4. parseFromString() invokes HTMLParser
5. HTMLLinkElement inserted into new document initiates fetching
6. Fetching callback cannot run because networking source was blocked on
step 2.
7. HTMLParser::the_end() spins waiting for HTMLLinkElement to unblock
load event, which will never happen because fetching callback cannot
proceed.
When both insets in a given axis are auto, we should use the static
position for absolutely positioned elements.
By doing this correctly, we exposed a bunch of other small bugs which
had to be fixed to compensate for new test failures. Those fixes are
included here as well:
- Don't apply margins twice.
- Compute the static position containing block chain correctly.
This makes https://brave.com/ look much better. :^)
"apply the history step" initiated by reloading or back/forward
navigation might require doing fetching while populating a document,
so it is not possible to restrict spin_until() to process only
NavigationAndTraversal task source.
"apply the history step" initiated by synchronous navigation keeps
processing only NavigationAndTraversal task source because it will
never have to populate a document. Another reason to keep synchronous
navigation blocking other task sources is that we crash if active SHE
changes in the middle of "apply the history step" initiated by sync
navigation. The new test is added to makes sure we don't regress that.
This piggybacks on the same fragment serialization code that innerHTML
uses, but instead of constructing an imaginary parent element like the
spec asks us to, we just add a separate serialization mode that includes
the context element in the serialized markup.
This makes the image carousel on https://utah.edu/ show up :^)
Currently the `<select>` dropdown IPC uses the option value attr to
find which option is selected. This won't work when options don't
have values or when multiple options have the same value. Also the
`SelectItem` contained so weird recursive structures that are
impossible to create with HTML. So I refactored `SelectItem` as a
variant, and gave the options a unique id. The id is send back to
`HTMLSelectElement` so it can find out exactly which option element
is selected.
Doing multiple `for_each_in_subtree()` passes was kind of a hack. We
can resolve everything in a single pass with a little more control over
the layout process. This also fixes a few minor issues like the sizing
of nested `<g>` elements.
More work is needed here though as this is still fairly ad-hoc.
Note: This does regress `css-namespace-tag-name-selector.html`,
previously SVG text within `<a>` elements would appear. However, this
was only because `for_each_in_subtree()` would blindly look through the
InlineNodes from the unimplemented `SVGAElement`s.
If initial src of an iframe is "about:blank", it does synchronous
navigation that is not supposed to be interleaved by other navigation
or usage of Document.open().
Fixes crashing in navigation on https://twinings.co.uk/
As the parser was trying to directly unwrap an unresolved duration.
Currently we are outputting the wrong results for the serialized
duration, but this is still a step forwards.
Fixes a crash seen on: https://evaparish.com/blog/how-i-edit
The implementation is very similar to #23831.
I created the test exactly like in #23713, except that I replaced the
last four lines in the ini file with:
```
-txt -Param -rATX1 10
-txt -Param -rATY1 -1
-txt -Param -rATX2 4
-txt -Param -rATY2 15
```
This is often used on login forms, for example, to toggle the visibility
of a password. The site will change the <input> element's type to "text"
to allow the password to show.
This needed the same `jbig2` changes as for the non-transposed ones,
and the changes to it mentioned on #23780.
I used the same .ini files as for the non-transposed ones, except
that I added `-txt -Param -Transposed 1` as last line to each of them.
All three new files display fine in Chrome.
They all look busted in Firefox.
I think this is likey a bug in pdf.js that I'll report upstream.
(Reportedly they look fine in Acrobat on Android.)
This already worked fine. Now it's tested.
I did have to teach `jbig2` to correctly generate test files for this.
See the PR adding these tests for local changes.
I used the script from #23659 to create these images, but I replaced
these lines:
```
-txt -Param -numInst 4
-ID 2 108 50 -ID 3 265 60 -ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 2
```
For `bottomleft`, I replaced them with:
```
-txt -Param -numInst 4
-ID 2 137 50 -ID 3 294 60 -ID 1 199 135 -ID 0 319 232
-txt -Param -RefCorner 0
```
For `bottomright`, I replaced them with:
```
-txt -Param -numInst 4
-ID 2 108 50 -ID 3 265 60 -ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 2
```
For `topright`, I replaced them with:
```
-txt -Param -numInst 4
-ID 2 108 79 -ID 3 265 89 -ID 1 100 234 -ID 0 70 351
-txt -Param -RefCorner 3
```
All three new files display fine in Chrome.
The bottomleft one displays fine in Firefox, while the other two
look compressed in X. I think this is a bug in pdf.js that I'll
report upstream.
(Reportedly they look fine in Acrobat on Android.)
Previously, we were accessing the performance through the current
window object. Thus caused a crash when `animate()` was called on an
element within a document with no associated window object. The global
object is now used to access the performance object in places where
a window object is not guaranteed to exist.
See the PR adding this test for local changes to `jbig2`.
I used the shell script mentioned in #23659, except I added the line
`-txt -Param -Transposed 1` at the very end of the .ini file.
As with all the symbol test cases, after running
Meta/jbig2_to_pdf.py -o foo.pdf foo.jb2 399 400
the file opens up ok in Chrome and Firefox (but not Safari), so
maybe it's not completely broken.
These changes do not solve hanging `location.reload()` and
`location.go()` but only align implementation with the latest edits in
the specification.
`WindowProxy-Get-after-detaching-from-browsing-context` test output is
affected because `iframe.remove();` no longer synchronously does
destruction of a document, but queues a task on event loop.
Co-Authored-By: Andrew Kaster <akaster@serenityos.org>
Going via the `ViewportPaintable` missed some steps (in particular
computing clip rects), which meant nested SVGs within SVGs-as-images
were completely clipped.
The T.800 spec says there should only be one 'colr' box, but the
extended jpx file format spec in T.801 annex M allows having multiple.
Method 2 is a basic ICC profile, while method 3 (jpx-only) allows full
ICC profiles. Support that.
For the test, I opened buggie.png in Photoshop, converted it to
grayscale, and saved it as a JPEG2000, with "JP2 Compatible" checked
and "Include Transparency" unchecked. I also unchecked "Include
Metadata", and "Lossless". I left "Fast Mode" checked and the quality
at the default 50.
While waiting for a task that populates a session history entry, we
can't limit the processing of the event loop to the
`NavigationAndTraversal` task source. This is because fetching uses the
`Networking` task source, which also needs to be processed.
Since making a fetch request might take some time, we want to process
everything on the event loop while waiting, to avoid blocking user
interactions.
It is still possible to use `spin_processing_tasks_with_source_until()`
on subsequent steps of `apply_the_history_step()`.
Also modifies test that was flaky.
Our implementation was errantly matching HTML tags other than the list
specified by the spec. For example, a <meta name=title> tag would be a
match for document.title.
For example, bandcamp will dynamically update its title when audio is
played as follows:
document.title = "▶︎ " + document.title;
And bandcamp also has a <meta name=title> tag. The result was that the
title would become "▶︎ [object HTMLMetaElement]".
From https://html.spec.whatwg.org/#list-of-animation-frame-callbacks:
Each target object has a map of animation frame callbacks, which is
an ordered map that must be initially empty, and an animation frame
callback identifier, which is a number that must initially be zero.
Implements the "top layer" concept from "CSS Positioned Layout Module
Level 4" specification.
- The tree builder is modified to ensure that layout nodes created by
top layer elements are children of the viewport.
- Implements missing steps in `showModal()` to add an element top top
layer.
- Implements missing steps in `close()` to remove an element from top
layer.
Further steps could be:
- Add support for `::backdrop` pseudo-element.
- Implement the "inert" concept from HTML spec to block hit-testing
when element from top layer is displayed.
Although the flex algorithm as specified does say to determine the cross
size of the flex container, this is not how our layout engine works.
The parent formatting context is responsible for sizing its children,
and since that's already happening, we can simply remove the cross
sizing step from FFC.
This adds a test for the code added in #23710.
I created this file using `jbig2` (see below for details), but as
usual it required a bunch of changes to it to make it actually produce
spec-compliant output. See the PR adding this image for my local diff.
I created the test image file by running this shell script with
`jbig2` tweaked as described above:
#!/bin/bash
set -eu
S=Tests/LibGfx/test-inputs/bmp/bitmap.bmp
# See make-symbol-jbig.sh (the script in #23659) for the general
# setup and some comments. See also make-symbol-textrefine.sh (in
# #23713).
#
# `-Ref` takes 5 arguments:
# 1. The symbol ID of this symbol (like after a `-Simple`)
# 2. A bmp file that the base symbol gets refined to
# 3. The ID of the base symbol
# 4. dx, dy
cat << EOF > jbig2-symbol-symbolrefine.ini
-sym -Seg 1
-sym -file -numClass -HeightClass 3 -WidthClass 1
-sym -file -numSymbol 3
-sym -file -Height 250
-sym -file -Width 120 -Simple 0 mouth-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 100
-sym -file -Width 100 -Simple 1 nose-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 30
-sym -file -Width 30 -Simple 2 top_eye-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -Param -Huff_DH 0
-sym -Param -Huff_DW 0
-sym -Seg 2
-sym -file -numClass -HeightClass 1 -WidthClass 1
-sym -file -numSymbol 1
-sym -file -Height 30
-sym -file -Width 30 -Ref 3 bottom_eye-1bpp.bmp 2 0 0
-sym -file -EndOfHeightClass
-sym -Param -Huff_DH 0
-sym -Param -Huff_DW 0
-sym -Param -RefTemplate 1
-txt -Seg 3
-txt -Param -numInst 4
-ID 2 108 50 -ID 3 265 60 -ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 1
-txt -Param -Xlocation 0
-txt -Param -Ylocation 0
-txt -Param -W 399
-txt -Param -H 400
EOF
J=$HOME/Downloads/T-REC-T.88-201808-I\!\!SOFT-ZST-E/Software
J=$J/JBIG2_SampleSoftware-A20180829/source/jbig2
$J -i "${S%.bmp}" -f bmp -o symbol-symbolrefine -F jb2 \
-ini jbig2-symbol-symbolrefine.ini
We were off-by-one when returning the result of parsing a quoted string
in Web::Fetch::Infrastructure::collect_an_http_quoted_string. Instead of
backtracking the lexer and consuming the backtracked string, do a simple
substring operation.
We can't decode any actual image data yet, but it shows that we can
read the basics of the container format. (...as long as there's an
Annex I container around the data, not just an Annex A codestream.
All files I've found so far have the container.)
I drew the thes input in Acorn.app and used "Save as..." to save it as
JPEG2000. It's an RGBA image.
This adds a test for the code added in #23696.
I created this file using `jbig2` (see below for details), but as
usual it required a bunch of changes to it to make it actually produce
spec-compliant output. See the PR adding this image for my local diff.
I created the test image file by running this shell script with
`jbig2` tweaked as described above:
#!/bin/bash
set -eu
S=Tests/LibGfx/test-inputs/bmp/bitmap.bmp
# See make-symbol-jbig.sh (the script in #23659) for the general
# setup and some comments. Note that the symbol section here only
# has 3 symbols, instead of 4 over there.
#
# `-RefID` takes 6 arguments:
# 1. The symbol ID of the base symbol (like after an `-ID`)
# 2. A bmp file that the base symbol gets refined to
# 3. y, x (like after an `-ID`)
# 4. dx, dy (note swapped order to previous item)
#
# We also explicitly set refinement adaptive pixels, because the
# default adaptive refinement pixels aren't the nominal pixels from
# the spec.
cat << EOF > jbig2-symbol-textrefine.ini
-sym -Seg 1
-sym -file -numClass -HeightClass 3 -WidthClass 1
-sym -file -numSymbol 3
-sym -file -Height 250
-sym -file -Width 120 -Simple 0 mouth-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 100
-sym -file -Width 100 -Simple 1 nose-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 30
-sym -file -Width 30 -Simple 2 top_eye-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -Param -Huff_DH 0
-sym -Param -Huff_DW 0
-txt -Seg 2
-txt -Param -numInst 4
-ID 2 108 50 -RefID 2 bottom_eye-1bpp.bmp 265 60 0 0
-ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 1
-txt -Param -Xlocation 0
-txt -Param -Ylocation 0
-txt -Param -W 399
-txt -Param -H 400
-txt -Param -rATX1 -1
-txt -Param -rATY1 -1
-txt -Param -rATX2 -1
-txt -Param -rATY2 -1
EOF
J=$HOME/Downloads/T-REC-T.88-201808-I\!\!SOFT-ZST-E/Software
J=$J/JBIG2_SampleSoftware-A20180829/source/jbig2
$J -i "${S%.bmp}" -f bmp -o symbol-textrefine -F jb2 -ini \
jbig2-symbol-textrefine.ini
Template 2 is needed by some symbols in 0000372.pdf page 11 and
0000857.pdf pages 1-4. Implement the others too while here. (The
mentioned pages in those two PDFs also use the "end of stripe" segment,
so they still don't render yet.
We still don't support EXTTEMPLATE.
This was added in commit f2663f477f as a
partial implementation of what is now LibWeb's forgiving Base64 decoder.
All use cases within LibWeb that require whitespace skipping now use
that implementation instead.
Removing this feature from AK allows us to know the exact output size of
a decoded Base64 string. We can still trim whitespace at the start and
end of the input though; for example, this is useful when reading from a
file that may have a newline at the end of the file.
This is a fetching AO and is only used by LibWeb in the context of fetch
tasks. Move it to LibWeb with other fetch methods.
The main reason for this is that it requires the use of other LibWeb AOs
such as the forgiving Base64 decoder and MIME sniffing. These AOs aren't
available within LibURL.
This extracts the bitbuffer combining code we had into a new function
composite_bitbuffer() and adds the following features:
* Real support for combination operators (which also lets us allow black
as background color again, even if that's never used in practice)
* Clipping support (not used here yet, but will be needed elsewhere
soon)
We're going to need this for text segment handling.
No behavior change.
If box is sized as replaced it still could be anything, not only SVG.
This fixes crashing on https://www.shopify.com/ that was caused by a
missing paintable for a box that has a layout node. This occurred
because the box was not laid out in dimension_box_on_line().
`Node::shadow_including_root()` was missing a null check, which caused
a crash when manipulating a select element, whose option elements were
initially detached.
The HTMLMediaElement, for example, contains spec text which states any
ongoing fetch process must be "stopped". The spec does not indicate how
to do this, so our implementation is rather ad-hoc.
Our current implementation may cause a crash in places that assume one
of the fetch algorithms that we set to null is *not* null. For example:
if (fetch_params.process_response) {
queue_fetch_task([]() {
fetch_params.process_response();
};
}
If the fetch process is stopped after queuing the fetch task, but not
before the fetch task is run, we will crash when running this fetch
algorithm.
We now track queued fetch tasks on the fetch controller. When the fetch
process is stopped, we cancel any such pending task.
It is a little bit awkward maintaining a fetch task ID. Ideally, we
could use the underlying task ID throughout. But we do not have access
to the underlying task nor its ID when the task is running, at which
point we need some ID to remove from the pending task list.
I created this file using `jbig2` (see below for details), but as
far as I can tell `jbig2` does not produce spec-compliant files:
1. It always writes to 0s for the run lengths that specify how
many symbols to export at the end of a symbol segment
2. It doesn't write any referred-to segments for text segments.
I think it's supposed to write a referred-to segment that
mentions the symbol segment the text segment refers to (?)
I locally tweaked `jbig2` to fix these two defects (*), so the image
added in this commit is correct as best I can tell. It opens fine
using `image` and `jbig2`'s decode mode, and via
`Meta/jbig2_to_pdf.py` in Firefox and Chrome. Without my tweaks,
the image decodes fine with `jbig2`, but not with any of the other
three. The image (in a pdf) does _not_ decode in Preview.app,
either with or without my local `jbig2` tweaks.
*: See the PR adding this image for my local diff.
I created the test image file by running this shell script with
`jbig2` tweaked as described above:
#!/bin/bash
set -eu
I=Build/lagom/bin/image
S=Tests/LibGfx/test-inputs/bmp/bitmap.bmp
$I "$S" --crop 232,70,120,250 -o mouth.bmp
$I "$S" --crop 135,100,100,100 -o nose.bmp
$I "$S" --crop 50,108,30,30 -o top_eye.bmp
$I "$S" --crop 60,265,30,30 -o bottom_eye.bmp
# I then manually converted those to 1bpp using Photoshop
# (Image->Mode->Grayscale, then Image->Mode->Bitmap...,
# File->Save As..., bmp) since `jbig2` gets confused by non-1bpp
# bmp files and `image` can't write 1bpp files :/
#
# (I tried `convert ${in} -monochrome ${in}-1bpp.bmp` via
# https://cancerberosgx.github.io/magic/playground/index.html
# first, but that produced bmp files that neither Preview.app nor
# `jbig2` could handle.)
#
# -HeightClass: Number of height classes
# -WidthClass: Maximum number of symbols in one height class
# -Simple means no refinement; the number after is the symbol's ID
# The 3 numbers afer `-ID` are id, y, x. The `-ID` are sorted by x.
# -RefCorner 1 means "top left".
#
# `jbig2` writes symbol and text segments as specified in the ini
# file, and then only stores the bits of the input image that aren't
# already set through symbol and text segments.
cat << EOF > jbig2-symbol.ini
-sym -Seg 1
-sym -file -numClass -HeightClass 3 -WidthClass 2
-sym -file -numSymbol 4
-sym -file -Height 250
-sym -file -Width 120 -Simple 0 mouth-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 100
-sym -file -Width 100 -Simple 1 nose-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 30
-sym -file -Width 30 -Simple 2 top_eye-1bpp.bmp
-sym -file -Width 30 -Simple 3 bottom_eye-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -Param -Huff_DH 0
-sym -Param -Huff_DW 0
-txt -Seg 2
-txt -Param -numInst 4
-ID 2 108 50 -ID 3 265 60 -ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 1
-txt -Param -Xlocation 0
-txt -Param -Ylocation 0
-txt -Param -W 399
-txt -Param -H 400
EOF
J=$HOME/Downloads/T-REC-T.88-201808-I\!\!SOFT-ZST-E/Software
J=$J/JBIG2_SampleSoftware-A20180829/source/jbig2
$J -i "${S%.bmp}" -f bmp -o symbol -F jb2 -ini jbig2-symbol.ini
...because "change" event should be dispatched on control even if it
has "display: none" style.
This change fixes selection in labels dropdown on GitHub's "new issue"
page.
Previously, the invalid value default wasn't taken into account when
determining the value that should be returned from the getter of an
enumerated attribute. This caused a crash when an enumerated attribute
of type DOMString? was set to an invalid value.
In our implementation of the "apply the history step" algorithm, we
have to spin-wait for the completion of tasks queued on the event loop.
Before this change, we allowed tasks from any source to be executed
while we were waiting. It should not be possible because it allows to
interrupt history step application by anything, including another
history step application.
Fixes https://github.com/SerenityOS/serenity/issues/23598
This encoding scheme comes from section 5 of RFC 4648, as an
alternative to the standard base64 encode/decode methods.
The only difference is that the last two characters are replaced
with '-' and '_', as '+' and '/' are not safe in URLs or filenames.
If an unexpected token is encountered when parsing an SVG attribute it
is now immediately propagated with ErrorOr. Previously, some situations
where an unexpected token was encountered could cause a crash.