There's no sense in allowing arbitrarily huge resolutions. Instead, we
now cap the screen size at 4K DCI resolution and will reject attempts
to go bigger with EINVAL.
Previously it was not possible for this function to fail. You could
exploit this by triggering the creation of a VMObject whose physical
memory range would wrap around the 32-bit limit.
It was quite easy to map kernel memory into userspace and read/write
whatever you wanted in it.
Test: Kernel/bxvga-mmap-kernel-into-userspace.cpp
System components that need an IRQ handling are now inheriting the
InterruptHandler class.
In addition to that, the initialization process of PATAChannel was
changed to fit the changes.
PATAChannel, E1000NetworkAdapter and RTL8139NetworkAdapter are now
inheriting from PCI::Device instead of InterruptHandler directly.
When using dbg() in the kernel, the output is automatically prefixed
with [Process(PID:TID)]. This makes it a lot easier to understand which
thread is generating the output.
This patch also cleans up some common logging messages and removes the
now-unnecessary "dbg() << *current << ..." pattern.
This broke with the >3GB paging overhaul. It's no longer possible to
write directly to physical addresses below the 8MB mark. Physical pages
need to be mapped into kernel VM by using a Region.
Fixes#1099.
As suggested by Joshua, this commit adds the 2-clause BSD license as a
comment block to the top of every source file.
For the first pass, I've just added myself for simplicity. I encourage
everyone to add themselves as copyright holders of any file they've
added or modified in some significant way. If I've added myself in
error somewhere, feel free to replace it with the appropriate copyright
holder instead.
Going forward, all new source files should include a license header.
The kernel and its static data structures are no longer identity-mapped
in the bottom 8MB of the address space, but instead move above 3GB.
The first 8MB above 3GB are pseudo-identity-mapped to the bottom 8MB of
the physical address space. But things don't have to stay this way!
Thanks to Jesse who made an earlier attempt at this, it was really easy
to get device drivers working once the page tables were in place! :^)
Fixes#734.
We now have these API's in <Kernel/Random.h>:
- get_fast_random_bytes(u8* buffer, size_t buffer_size)
- get_good_random_bytes(u8* buffer, size_t buffer_size)
- get_fast_random<T>()
- get_good_random<T>()
Internally they both use x86 RDRAND if available, otherwise they fall
back to the same LCG we had in RandomDevice all along.
The main purpose of this patch is to give kernel code a way to better
express its needs for random data.
Randomness is something that will require a lot more work, but this is
hopefully a step in the right direction.
The new PCI subsystem is initialized during runtime.
PCI::Initializer is supposed to be called during early boot, to
perform a few tests, and initialize the proper configuration space
access mechanism. Kernel boot parameters can be specified by a user to
determine what tests will occur, to aid debugging on problematic
machines.
After that, PCI::Initializer should be dismissed.
PCI::IOAccess is a class that is derived from PCI::Access
class and implements PCI configuration space access mechanism via x86
IO ports.
PCI::MMIOAccess is a class that is derived from PCI::Access
and implements PCI configurtaion space access mechanism via memory
access.
The new PCI subsystem also supports determination of IO/MMIO space
needed by a device by checking a given BAR.
In addition, Every device or component that use the PCI subsystem has
changed to match the last changes.
Okay, one "dunce hat" point for me. The new PTY majors conflicted with
PATAChannel. Now they are 200 for master and 201 for slave, not used
by anything else.. I hope!
Instead of waking up repeatedly to check if a disk operation has
finished, use a WaitQueue and wake it up in the IRQ handler.
This simplifies the device driver a bit, and makes it more responsive
as well :^)
The kernel is now no longer identity mapped to the bottom 8MiB of
memory, and is now mapped at the higher address of `0xc0000000`.
The lower ~1MiB of memory (from GRUB's mmap), however is still
identity mapped to provide an easy way for the kernel to get
physical pages for things such as DMA etc. These could later be
mapped to the higher address too, as I'm not too sure how to
go about doing this elegantly without a lot of address subtractions.
Also added an option in the run script to force PIO operation mode with
the IDE controller.
In addition, we're no longer limited to PIIX3 and PIIX4 chipsets for DMA
Now that the SystemMonitor queries which open files can be read and written to,
having can_read()/can_write() unconditionally call ASSERT_NOT_REACHED() leads
to system crashes when inspecting the WindowServer.
Instead, just return true from can_read()/can_write() (indicating that the
read()/write() syscalls should not block) and return -EINVAL when trying to
actually read from or write to these devices.
This helps aid debugging of issues such as #695, where the bridge chip
that controls IDE is NOT a PIIX3/4 compatible controller. Instead of
just hanging when the DMA registers can't be accessed, the system will
inform the user that no valid IDE controller has been found. In this
case, the system will not attempt to initialise the DMA registers and
instead use PIO mode.
Fixed an issue with operator precedence in calls to `send_byte()`, in
which a value of `1` was being sent to the function. This had the
nasty side-effect of selecting the slave drive if the value of
`head` was equal to one. A read/write would fail in the case, as
it would attempt to read from the slave drive (not good).
I've also added a seek to the top of the read/write code, which seems
to have fixed an issue with Linux not detecting the disk images after
they have been unmounted from Serenity. This isn't specified in the
datasheet, but a few other drivers have it so we should too :^)
Also added a script to handle creation of GPT partitioned disk (with
GRUB config file). Block limit will be used to disallow potential access
to other partitions.
This was a workaround to be able to build on case-insensitive file
systems where it might get confused about <string.h> vs <String.h>.
Let's just not support building that way, so String.h can have an
objectively nicer name. :^)
The alternate status register is not part of the same set of registers
as all the other stuff.
Also rename wait_400ns() to io_delay() since we had no guarantee that
it was waiting for 400ns..
Motor Enable now selects the correct drive. The ternary
operations were backwards. QEMU doesn't care (obviously) but
on a real PC, the drive doesn't actually ever get selected...
This implements a very basic VGA device using the information provided
to us by the bootloader in the multiboot header. This allows Serenity to
boot to the desktop on basically any halfway modern system.
