If a TLB flush request is broadcast to other processors and the addresses
to flush are user mode addresses, we can ignore such a request on the
target processor if the page directory currently in use doesn't match
the addresses to be flushed. We still need to broadcast to all processors
in that case because the other processors may switch to that same page
directory at any time.
By designating a committed page pool we can guarantee to have physical
pages available for lazy allocation in mappings. However, when forking
we will overcommit. The assumption is that worst-case it's better for
the fork to die due to insufficient physical memory on COW access than
the parent that created the region. If a fork wants to ensure that all
memory is available (trigger a commit) then it can use madvise.
This also means that fork now can gracefully fail if we don't have
enough physical pages available.
This adds the ability for a Region to define volatile/nonvolatile
areas within mapped memory using madvise(). This also means that
memory purging takes into account all views of the PurgeableVMObject
and only purges memory that is not needed by all of them. When calling
madvise() to change an area to nonvolatile memory, return whether
memory from that area was purged. At that time also try to remap
all memory that is requested to be nonvolatile, and if insufficient
pages are available notify the caller of that fact.
Since the CPU already does almost all necessary validation steps
for us, we don't really need to attempt to do this. Doing it
ourselves doesn't really work very reliably, because we'd have to
account for other processors modifying virtual memory, and we'd
have to account for e.g. pages not being able to be allocated
due to insufficient resources.
So change the copy_to/from_user (and associated helper functions)
to use the new safe_memcpy, which will return whether it succeeded
or not. The only manual validation step needed (which the CPU
can't perform for us) is making sure the pointers provided by user
mode aren't pointing to kernel mappings.
To make it easier to read/write from/to either kernel or user mode
data add the UserOrKernelBuffer helper class, which will internally
either use copy_from/to_user or directly memcpy, or pass the data
through directly using a temporary buffer on the stack.
Last but not least we need to keep syscall params trivial as we
need to copy them from/to user mode using copy_from/to_user.
Sometimes a physical underlying page may be there, but we may be
unable to allocate a page table that may be needed to map it. Bubble
up such mapping errors so that they can be handled more appropriately.
If allocating a page table triggers purging memory, we need to call
quickmap_pd again to make sure the underlying physical page is
remapped to the correct one. This is needed because purging itself
may trigger calls to ensure_pte as well.
Fixes#3370
Add an ExpandableHeap and switch kmalloc to use it, which allows
for the kmalloc heap to grow as needed.
In order to make heap expansion to work, we keep around a 1 MiB backup
memory region, because creating a region would require space in the
same heap. This means, the heap will grow as soon as the reported
utilization is less than 1 MiB. It will also return memory if an entire
subheap is no longer needed, although that is rarely possible.
MemoryManager cannot use the Singleton class because
MemoryManager::initialize is called before the global constructors
are run. That caused the Singleton to be re-initialized, causing
it to create another MemoryManager instance.
We can now properly initialize all processors without
crashing by sending SMP IPI messages to synchronize memory
between processors.
We now initialize the APs once we have the scheduler running.
This is so that we can process IPI messages from the other
cores.
Also rework interrupt handling a bit so that it's more of a
1:1 mapping. We need to allocate non-sharable interrupts for
IPIs.
This also fixes the occasional hang/crash because all
CPUs now synchronize memory with each other.
When delivering urgent signals to the current thread
we need to check if we should be unblocked, and if not
we need to yield to another process.
We also need to make sure that we suppress context switches
during Process::exec() so that we don't clobber the registers
that it sets up (eip mainly) by a context switch. To be able
to do that we add the concept of a critical section, which are
similar to Process::m_in_irq but different in that they can be
requested at any time. Calls to Scheduler::yield and
Scheduler::donate_to will return instantly without triggering
a context switch, but the processor will then asynchronously
trigger a context switch once the critical section is left.
This memory range was set up using 2MB pages by the code in boot.S.
Because of that, the kernel image protection code didn't work, since it
assumed 4KB pages.
We now switch to 4KB pages during MemoryManager initialization. This
makes the kernel image protection code work correctly again. :^)
This patch reduces the number of code paths that lead to the allocation
of a Region object. It's quite hard to follow the various ways in which
this can happen, so this is an effort to simplify.
The kernel sampling profiler will walk thread stacks during the timer
tick handler. Since it's not safe to trigger page faults during IRQ's,
we now avoid this by checking the page tables manually before accessing
each stack location.
This patch adds a globally shared zero-filled PhysicalPage that will
be mapped into every slot of every zero-filled AnonymousVMObject until
that page is written to, achieving CoW-like zero-filled pages.
Initial testing show that this doesn't actually achieve any sharing yet
but it seems like a good design regardless, since it may reduce the
number of page faults taken by programs.
If you look at the refcount of MM.shared_zero_page() it will have quite
a high refcount, but that's just because everything maps it everywhere.
If you want to see the "real" refcount, you can build with the
MAP_SHARED_ZERO_PAGE_LAZILY flag, and we'll defer mapping of the shared
zero page until the first NP read fault.
I've left this behavior behind a flag for future testing of this code.
We don't need to have this method anymore. It was a hack that was used
in many components in the system but currently we use better methods to
create virtual memory mappings. To prevent any further use of this
method it's best to just remove it completely.
Also, the APIC code is disabled for now since it doesn't help booting
the system, and is broken since it relies on identity mapping to exist
in the first 1MB. Any call to the APIC code will result in assertion
failed.
In addition to that, the name of the method which is responsible to
create an identity mapping between 1MB to 2MB was changed, to be more
precise about its purpose.
Instead of restoring CR3 to the current process's paging scope when a
ProcessPagingScope goes out of scope, we now restore exactly whatever
the CR3 value was when we created the ProcessPagingScope.
This fixes breakage in situations where a process ends up with nested
ProcessPagingScopes. This was making profiling very fragile, and with
this change it's now possible to profile g++! :^)
This will panic the kernel immediately if these functions are misused
so we can catch it and fix the misuse.
This patch fixes a couple of misuses:
- create_signal_trampolines() writes to a user-accessible page
above the 3GB address mark. We should really get rid of this
page but that's a whole other thing.
- CoW faults need to use copy_from_user rather than copy_to_user
since it's the *source* pointer that points to user memory.
- Inode faults need to use memcpy rather than copy_to_user since
we're copying a kernel stack buffer into a quickmapped page.
This should make the copy_to/from_user() functions slightly less useful
for exploitation. Before this, they were essentially just glorified
memcpy() with SMAP disabled. :^)
Technically the bottom 2MB is still identity-mapped for the kernel and
not made available to userspace at all, but for simplicity's sake we
can just ignore that and make "address < 0xc0000000" the canonical
check for user/kernel.
As suggested by Joshua, this commit adds the 2-clause BSD license as a
comment block to the top of every source file.
For the first pass, I've just added myself for simplicity. I encourage
everyone to add themselves as copyright holders of any file they've
added or modified in some significant way. If I've added myself in
error somewhere, feel free to replace it with the appropriate copyright
holder instead.
Going forward, all new source files should include a license header.
