LadybirdBrowser/ladybird
1
1
Fork 0
mirror of https://github.com/LadybirdBrowser/ladybird.git synced 2024-11-11 01:06:01 +03:00
Code Issues Packages Projects Releases Wiki Activity
40b1e6376b
ladybird/Kernel/Storage/AHCIPort.cpp
Liav A 741c871bc1 Kernel/Storage: Unify all ATA devices 
There's basically no real difference in software between a SATA harddisk
and IDE harddisk. The difference in the implementation is for the host
bus adapter protocol and registers layout.
Therefore, there's no point in putting a distinction in software to
these devices.

This change also greatly simplifies and removes stale APIs and removes
unnecessary parameters in constructor calls, which tighten things
further everywhere.
2021-10-09 01:39:55 +02:00

835 lines
36 KiB
C++
Raw Blame History

/*
* Copyright (c) 2021, Liav A. <liavalb@hotmail.co.il>
*
* SPDX-License-Identifier: BSD-2-Clause
*/
// For more information about locking in this code
// please look at Documentation/Kernel/AHCILocking.md
#include <AK/Atomic.h>
#include <Kernel/Locking/Spinlock.h>
#include <Kernel/Memory/MemoryManager.h>
#include <Kernel/Memory/ScatterGatherList.h>
#include <Kernel/Memory/TypedMapping.h>
#include <Kernel/Storage/AHCIPort.h>
#include <Kernel/Storage/ATA.h>
#include <Kernel/Storage/ATADiskDevice.h>
#include <Kernel/Storage/StorageManagement.h>
#include <Kernel/WorkQueue.h>
namespace Kernel {
NonnullRefPtr<AHCIPort> AHCIPort::create(const AHCIPortHandler& handler, volatile AHCI::PortRegisters& registers, u32 port_index)
{
return adopt_ref(*new AHCIPort(handler, registers, port_index));
}
AHCIPort::AHCIPort(const AHCIPortHandler& handler, volatile AHCI::PortRegisters& registers, u32 port_index)
: m_port_index(port_index)
, m_port_registers(registers)
, m_parent_handler(handler)
, m_interrupt_status((volatile u32&)m_port_registers.is)
, m_interrupt_enable((volatile u32&)m_port_registers.ie)
{
if (is_interface_disabled()) {
m_disabled_by_firmware = true;
return;
}
m_command_list_page = MM.allocate_supervisor_physical_page();
m_fis_receive_page = MM.allocate_supervisor_physical_page();
if (m_command_list_page.is_null() || m_fis_receive_page.is_null())
return;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Command list page at {}", representative_port_index(), m_command_list_page->paddr());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: FIS receive page at {}", representative_port_index(), m_command_list_page->paddr());
for (size_t index = 0; index < 1; index++) {
m_dma_buffers.append(MM.allocate_supervisor_physical_page().release_nonnull());
}
for (size_t index = 0; index < 1; index++) {
m_command_table_pages.append(MM.allocate_supervisor_physical_page().release_nonnull());
}
auto region_or_error = MM.allocate_kernel_region(m_command_list_page->paddr(), PAGE_SIZE, "AHCI Port Command List", Memory::Region::Access::ReadWrite, Memory::Region::Cacheable::No);
if (region_or_error.is_error())
TODO();
m_command_list_region = region_or_error.release_value();
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Command list region at {}", representative_port_index(), m_command_list_region->vaddr());
}
void AHCIPort::clear_sata_error_register() const
{
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Clearing SATA error register.", representative_port_index());
m_port_registers.serr = m_port_registers.serr;
}
void AHCIPort::handle_interrupt()
{
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Interrupt handled, PxIS {}", representative_port_index(), m_interrupt_status.raw_value());
if (m_interrupt_status.raw_value() == 0) {
return;
}
if (m_interrupt_status.is_set(AHCI::PortInterruptFlag::PRC) && m_interrupt_status.is_set(AHCI::PortInterruptFlag::PC)) {
clear_sata_error_register();
if ((m_port_registers.ssts & 0xf) != 3) {
m_connected_device->prepare_for_unplug();
StorageManagement::the().remove_device(*m_connected_device);
g_io_work->queue([this]() {
m_connected_device->before_removing();
m_connected_device.clear();
});
} else {
g_io_work->queue([this]() {
reset();
});
}
return;
}
if (m_interrupt_status.is_set(AHCI::PortInterruptFlag::PRC)) {
clear_sata_error_register();
m_wait_connect_for_completion = true;
}
if (m_interrupt_status.is_set(AHCI::PortInterruptFlag::INF)) {
// We need to defer the reset, because we can receive interrupts when
// resetting the device.
g_io_work->queue([this]() {
reset();
});
return;
}
if (m_interrupt_status.is_set(AHCI::PortInterruptFlag::IF) || m_interrupt_status.is_set(AHCI::PortInterruptFlag::TFE) || m_interrupt_status.is_set(AHCI::PortInterruptFlag::HBD) || m_interrupt_status.is_set(AHCI::PortInterruptFlag::HBF)) {
g_io_work->queue([this]() {
recover_from_fatal_error();
});
return;
}
if (m_interrupt_status.is_set(AHCI::PortInterruptFlag::DHR) || m_interrupt_status.is_set(AHCI::PortInterruptFlag::PS)) {
m_wait_for_completion = false;
// Now schedule reading/writing the buffer as soon as we leave the irq handler.
// This is important so that we can safely access the buffers, which could
// trigger page faults
if (!m_current_request) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request handled, probably identify request", representative_port_index());
} else {
g_io_work->queue([this]() {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request handled", representative_port_index());
MutexLocker locker(m_lock);
VERIFY(m_current_request);
VERIFY(m_current_scatter_list);
if (!m_connected_device) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request success", representative_port_index());
complete_current_request(AsyncDeviceRequest::Failure);
return;
}
if (m_current_request->request_type() == AsyncBlockDeviceRequest::Read) {
if (auto result = m_current_request->write_to_buffer(m_current_request->buffer(), m_current_scatter_list->dma_region().as_ptr(), m_connected_device->block_size() * m_current_request->block_count()); result.is_error()) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request failure, memory fault occurred when reading in data.", representative_port_index());
m_current_scatter_list = nullptr;
complete_current_request(AsyncDeviceRequest::MemoryFault);
return;
}
}
m_current_scatter_list = nullptr;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request success", representative_port_index());
complete_current_request(AsyncDeviceRequest::Success);
});
}
}
m_interrupt_status.clear();
}
bool AHCIPort::is_interrupts_enabled() const
{
return !m_interrupt_enable.is_cleared();
}
void AHCIPort::recover_from_fatal_error()
{
MutexLocker locker(m_lock);
SpinlockLocker lock(m_hard_lock);
dmesgln("{}: AHCI Port {} fatal error, shutting down!", m_parent_handler->hba_controller()->pci_address(), representative_port_index());
dmesgln("{}: AHCI Port {} fatal error, SError {}", m_parent_handler->hba_controller()->pci_address(), representative_port_index(), (u32)m_port_registers.serr);
stop_command_list_processing();
stop_fis_receiving();
m_interrupt_enable.clear();
}
void AHCIPort::eject()
{
// FIXME: This operation (meant to be used on optical drives) doesn't work yet when I tested it on real hardware
TODO();
VERIFY(m_lock.is_locked());
VERIFY(is_atapi_attached());
VERIFY(is_operable());
clear_sata_error_register();
if (!spin_until_ready())
return;
auto unused_command_header = try_to_find_unused_command_header();
VERIFY(unused_command_header.has_value());
auto* command_list_entries = (volatile AHCI::CommandHeader*)m_command_list_region->vaddr().as_ptr();
command_list_entries[unused_command_header.value()].ctba = m_command_table_pages[unused_command_header.value()].paddr().get();
command_list_entries[unused_command_header.value()].ctbau = 0;
command_list_entries[unused_command_header.value()].prdbc = 0;
command_list_entries[unused_command_header.value()].prdtl = 0;
// Note: we must set the correct Dword count in this register. Real hardware
// AHCI controllers do care about this field! QEMU doesn't care if we don't
// set the correct CFL field in this register, real hardware will set an
// handshake error bit in PxSERR register if CFL is incorrect.
command_list_entries[unused_command_header.value()].attributes = (size_t)FIS::DwordCount::RegisterHostToDevice | AHCI::CommandHeaderAttributes::P | AHCI::CommandHeaderAttributes::C | AHCI::CommandHeaderAttributes::A;
auto command_table_region = MM.allocate_kernel_region(m_command_table_pages[unused_command_header.value()].paddr().page_base(), Memory::page_round_up(sizeof(AHCI::CommandTable)), "AHCI Command Table", Memory::Region::Access::ReadWrite, Memory::Region::Cacheable::No).release_value();
auto& command_table = *(volatile AHCI::CommandTable*)command_table_region->vaddr().as_ptr();
memset(const_cast<u8*>(command_table.command_fis), 0, 64);
auto& fis = *(volatile FIS::HostToDevice::Register*)command_table.command_fis;
fis.header.fis_type = (u8)FIS::Type::RegisterHostToDevice;
fis.command = ATA_CMD_PACKET;
full_memory_barrier();
memset(const_cast<u8*>(command_table.atapi_command), 0, 32);
full_memory_barrier();
command_table.atapi_command[0] = ATAPI_CMD_EJECT;
command_table.atapi_command[1] = 0;
command_table.atapi_command[2] = 0;
command_table.atapi_command[3] = 0;
command_table.atapi_command[4] = 0b10;
command_table.atapi_command[5] = 0;
command_table.atapi_command[6] = 0;
command_table.atapi_command[7] = 0;
command_table.atapi_command[8] = 0;
command_table.atapi_command[9] = 0;
command_table.atapi_command[10] = 0;
command_table.atapi_command[11] = 0;
fis.device = 0;
fis.header.port_muliplier = fis.header.port_muliplier | (u8)FIS::HeaderAttributes::C;
// The below loop waits until the port is no longer busy before issuing a new command
if (!spin_until_ready())
return;
full_memory_barrier();
mark_command_header_ready_to_process(unused_command_header.value());
full_memory_barrier();
while (1) {
if (m_port_registers.serr != 0) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Eject Drive failed, SError {:#08x}", representative_port_index(), (u32)m_port_registers.serr);
try_disambiguate_sata_error();
VERIFY_NOT_REACHED();
}
}
dbgln("AHCI Port {}: Eject Drive", representative_port_index());
return;
}
bool AHCIPort::reset()
{
MutexLocker locker(m_lock);
SpinlockLocker lock(m_hard_lock);
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Resetting", representative_port_index());
if (m_disabled_by_firmware) {
dmesgln("AHCI Port {}: Disabled by firmware ", representative_port_index());
return false;
}
full_memory_barrier();
m_interrupt_enable.clear();
m_interrupt_status.clear();
full_memory_barrier();
start_fis_receiving();
full_memory_barrier();
clear_sata_error_register();
full_memory_barrier();
if (!initiate_sata_reset(lock)) {
return false;
}
return initialize(lock);
}
bool AHCIPort::initialize_without_reset()
{
MutexLocker locker(m_lock);
SpinlockLocker lock(m_hard_lock);
dmesgln("AHCI Port {}: {}", representative_port_index(), try_disambiguate_sata_status());
return initialize(lock);
}
bool AHCIPort::initialize(SpinlockLocker<Spinlock>& main_lock)
{
VERIFY(m_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Initialization. Signature = {:#08x}", representative_port_index(), static_cast<u32>(m_port_registers.sig));
if (!is_phy_enabled()) {
// Note: If PHY is not enabled, just clear the interrupt status and enable interrupts, in case
// we are going to hotplug a device later.
m_interrupt_status.clear();
m_interrupt_enable.set_all();
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Bailing initialization, Phy is not enabled.", representative_port_index());
return false;
}
rebase();
power_on();
spin_up();
clear_sata_error_register();
start_fis_receiving();
set_active_state();
m_interrupt_status.clear();
m_interrupt_enable.set_all();
full_memory_barrier();
// This actually enables the port...
start_command_list_processing();
full_memory_barrier();
size_t logical_sector_size = 512;
size_t physical_sector_size = 512;
u64 max_addressable_sector = 0;
if (identify_device(main_lock)) {
auto identify_block = Memory::map_typed<ATAIdentifyBlock>(m_parent_handler->get_identify_metadata_physical_region(m_port_index));
// Check if word 106 is valid before using it!
if ((identify_block->physical_sector_size_to_logical_sector_size >> 14) == 1) {
if (identify_block->physical_sector_size_to_logical_sector_size & (1 << 12)) {
VERIFY(identify_block->logical_sector_size != 0);
logical_sector_size = identify_block->logical_sector_size;
}
if (identify_block->physical_sector_size_to_logical_sector_size & (1 << 13)) {
physical_sector_size = logical_sector_size << (identify_block->physical_sector_size_to_logical_sector_size & 0xf);
}
}
// Check if the device supports LBA48 mode
if (identify_block->commands_and_feature_sets_supported[1] & (1 << 10)) {
max_addressable_sector = identify_block->user_addressable_logical_sectors_count;
} else {
max_addressable_sector = identify_block->max_28_bit_addressable_logical_sector;
}
if (is_atapi_attached()) {
m_port_registers.cmd = m_port_registers.cmd | (1 << 24);
}
dmesgln("AHCI Port {}: Device found, Capacity={}, Bytes per logical sector={}, Bytes per physical sector={}", representative_port_index(), max_addressable_sector * logical_sector_size, logical_sector_size, physical_sector_size);
// FIXME: We don't support ATAPI devices yet, so for now we don't "create" them
if (!is_atapi_attached()) {
m_connected_device = ATADiskDevice::create(m_parent_handler->hba_controller(), { m_port_index, 0 }, 0, logical_sector_size, max_addressable_sector);
} else {
dbgln("AHCI Port {}: Ignoring ATAPI devices for now as we don't currently support them.", representative_port_index());
}
}
return true;
}
const char* AHCIPort::try_disambiguate_sata_status()
{
switch (m_port_registers.ssts & 0xf) {
case 0:
return "Device not detected, Phy not enabled";
case 1:
return "Device detected, Phy disabled";
case 3:
return "Device detected, Phy enabled";
case 4:
return "interface disabled";
}
VERIFY_NOT_REACHED();
}
void AHCIPort::try_disambiguate_sata_error()
{
dmesgln("AHCI Port {}: SErr breakdown:", representative_port_index());
dmesgln("AHCI Port {}: Diagnostics:", representative_port_index());
constexpr u32 diagnostics_bitfield = 0xFFFF0000;
if ((m_port_registers.serr & diagnostics_bitfield) > 0) {
if (m_port_registers.serr & AHCI::SErr::DIAG_X)
dmesgln("AHCI Port {}: - Exchanged", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_F)
dmesgln("AHCI Port {}: - Unknown FIS Type", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_T)
dmesgln("AHCI Port {}: - Transport state transition error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_S)
dmesgln("AHCI Port {}: - Link sequence error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_H)
dmesgln("AHCI Port {}: - Handshake error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_C)
dmesgln("AHCI Port {}: - CRC error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_D)
dmesgln("AHCI Port {}: - Disparity error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_B)
dmesgln("AHCI Port {}: - 10B to 8B decode error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_W)
dmesgln("AHCI Port {}: - Comm Wake", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_I)
dmesgln("AHCI Port {}: - Phy Internal Error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::DIAG_N)
dmesgln("AHCI Port {}: - PhyRdy Change", representative_port_index());
} else {
dmesgln("AHCI Port {}: - No diagnostic information provided.", representative_port_index());
}
dmesgln("AHCI Port {}: Error(s):", representative_port_index());
constexpr u32 error_bitfield = 0xFFFF;
if ((m_port_registers.serr & error_bitfield) > 0) {
if (m_port_registers.serr & AHCI::SErr::ERR_E)
dmesgln("AHCI Port {}: - Internal error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::ERR_P)
dmesgln("AHCI Port {}: - Protocol error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::ERR_C)
dmesgln("AHCI Port {}: - Persistent communication or data integrity error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::ERR_T)
dmesgln("AHCI Port {}: - Transient data integrity error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::ERR_M)
dmesgln("AHCI Port {}: - Recovered communications error", representative_port_index());
if (m_port_registers.serr & AHCI::SErr::ERR_I)
dmesgln("AHCI Port {}: - Recovered data integrity error", representative_port_index());
} else {
dmesgln("AHCI Port {}: - No error information provided.", representative_port_index());
}
}
void AHCIPort::rebase()
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
VERIFY(!m_command_list_page.is_null() && !m_fis_receive_page.is_null());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Rebasing.", representative_port_index());
full_memory_barrier();
stop_command_list_processing();
stop_fis_receiving();
full_memory_barrier();
size_t retry = 0;
// Try to wait 1 second for HBA to clear Command List Running and FIS Receive Running
while (retry < 1000) {
if (!(m_port_registers.cmd & (1 << 15)) && !(m_port_registers.cmd & (1 << 14)))
break;
IO::delay(1000);
retry++;
}
full_memory_barrier();
m_port_registers.clbu = 0;
m_port_registers.clb = m_command_list_page->paddr().get();
m_port_registers.fbu = 0;
m_port_registers.fb = m_fis_receive_page->paddr().get();
}
bool AHCIPort::is_operable() const
{
// Note: The definition of "operable" is somewhat ambiguous, but we determine it
// by 3 parameters as shown below.
return (!m_command_list_page.is_null())
&& (!m_fis_receive_page.is_null())
&& ((m_port_registers.cmd & (1 << 14)) != 0);
}
void AHCIPort::set_active_state() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Switching to active state.", representative_port_index());
m_port_registers.cmd = (m_port_registers.cmd & 0x0ffffff) | (1 << 28);
}
void AHCIPort::set_sleep_state() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
m_port_registers.cmd = (m_port_registers.cmd & 0x0ffffff) | (0b1000 << 28);
}
size_t AHCIPort::calculate_descriptors_count(size_t block_count) const
{
VERIFY(m_connected_device);
size_t needed_dma_regions_count = Memory::page_round_up((block_count * m_connected_device->block_size())) / PAGE_SIZE;
VERIFY(needed_dma_regions_count <= m_dma_buffers.size());
return needed_dma_regions_count;
}
Optional<AsyncDeviceRequest::RequestResult> AHCIPort::prepare_and_set_scatter_list(AsyncBlockDeviceRequest& request)
{
VERIFY(m_lock.is_locked());
VERIFY(request.block_count() > 0);
NonnullRefPtrVector<Memory::PhysicalPage> allocated_dma_regions;
for (size_t index = 0; index < calculate_descriptors_count(request.block_count()); index++) {
allocated_dma_regions.append(m_dma_buffers.at(index));
}
m_current_scatter_list = Memory::ScatterGatherList::try_create(request, allocated_dma_regions.span(), m_connected_device->block_size());
if (!m_current_scatter_list)
return AsyncDeviceRequest::Failure;
if (request.request_type() == AsyncBlockDeviceRequest::Write) {
if (auto result = request.read_from_buffer(request.buffer(), m_current_scatter_list->dma_region().as_ptr(), m_connected_device->block_size() * request.block_count()); result.is_error()) {
return AsyncDeviceRequest::MemoryFault;
}
}
return {};
}
void AHCIPort::start_request(AsyncBlockDeviceRequest& request)
{
MutexLocker locker(m_lock);
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request start", representative_port_index());
VERIFY(!m_current_request);
VERIFY(!m_current_scatter_list);
m_current_request = request;
auto result = prepare_and_set_scatter_list(request);
if (result.has_value()) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request failure.", representative_port_index());
locker.unlock();
complete_current_request(result.value());
return;
}
auto success = access_device(request.request_type(), request.block_index(), request.block_count());
if (!success) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Request failure.", representative_port_index());
locker.unlock();
complete_current_request(AsyncDeviceRequest::Failure);
return;
}
}
void AHCIPort::complete_current_request(AsyncDeviceRequest::RequestResult result)
{
VERIFY(m_current_request);
auto current_request = m_current_request;
m_current_request.clear();
current_request->complete(result);
}
bool AHCIPort::spin_until_ready() const
{
VERIFY(m_lock.is_locked());
size_t spin = 0;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Spinning until ready.", representative_port_index());
while ((m_port_registers.tfd & (ATA_SR_BSY | ATA_SR_DRQ)) && spin <= 100) {
IO::delay(1000);
spin++;
}
if (spin == 100) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: SPIN exceeded 100 milliseconds threshold", representative_port_index());
return false;
}
return true;
}
bool AHCIPort::access_device(AsyncBlockDeviceRequest::RequestType direction, u64 lba, u8 block_count)
{
VERIFY(m_connected_device);
VERIFY(is_operable());
VERIFY(m_lock.is_locked());
VERIFY(m_current_scatter_list);
SpinlockLocker lock(m_hard_lock);
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Do a {}, lba {}, block count {}", representative_port_index(), direction == AsyncBlockDeviceRequest::RequestType::Write ? "write" : "read", lba, block_count);
if (!spin_until_ready())
return false;
auto unused_command_header = try_to_find_unused_command_header();
VERIFY(unused_command_header.has_value());
auto* command_list_entries = (volatile AHCI::CommandHeader*)m_command_list_region->vaddr().as_ptr();
command_list_entries[unused_command_header.value()].ctba = m_command_table_pages[unused_command_header.value()].paddr().get();
command_list_entries[unused_command_header.value()].ctbau = 0;
command_list_entries[unused_command_header.value()].prdbc = 0;
command_list_entries[unused_command_header.value()].prdtl = m_current_scatter_list->scatters_count();
// Note: we must set the correct Dword count in this register. Real hardware
// AHCI controllers do care about this field! QEMU doesn't care if we don't
// set the correct CFL field in this register, real hardware will set an
// handshake error bit in PxSERR register if CFL is incorrect.
command_list_entries[unused_command_header.value()].attributes = (size_t)FIS::DwordCount::RegisterHostToDevice | AHCI::CommandHeaderAttributes::P | (is_atapi_attached() ? AHCI::CommandHeaderAttributes::A : 0) | (direction == AsyncBlockDeviceRequest::RequestType::Write ? AHCI::CommandHeaderAttributes::W : 0);
dbgln_if(AHCI_DEBUG, "AHCI Port {}: CLE: ctba={:#08x}, ctbau={:#08x}, prdbc={:#08x}, prdtl={:#04x}, attributes={:#04x}", representative_port_index(), (u32)command_list_entries[unused_command_header.value()].ctba, (u32)command_list_entries[unused_command_header.value()].ctbau, (u32)command_list_entries[unused_command_header.value()].prdbc, (u16)command_list_entries[unused_command_header.value()].prdtl, (u16)command_list_entries[unused_command_header.value()].attributes);
auto command_table_region = MM.allocate_kernel_region(m_command_table_pages[unused_command_header.value()].paddr().page_base(), Memory::page_round_up(sizeof(AHCI::CommandTable)), "AHCI Command Table", Memory::Region::Access::ReadWrite, Memory::Region::Cacheable::No).release_value();
auto& command_table = *(volatile AHCI::CommandTable*)command_table_region->vaddr().as_ptr();
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Allocated command table at {}", representative_port_index(), command_table_region->vaddr());
memset(const_cast<u8*>(command_table.command_fis), 0, 64);
size_t scatter_entry_index = 0;
size_t data_transfer_count = (block_count * m_connected_device->block_size());
for (auto scatter_page : m_current_scatter_list->vmobject().physical_pages()) {
VERIFY(data_transfer_count != 0);
VERIFY(scatter_page);
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Add a transfer scatter entry @ {}", representative_port_index(), scatter_page->paddr());
command_table.descriptors[scatter_entry_index].base_high = 0;
command_table.descriptors[scatter_entry_index].base_low = scatter_page->paddr().get();
if (data_transfer_count <= PAGE_SIZE) {
command_table.descriptors[scatter_entry_index].byte_count = data_transfer_count - 1;
data_transfer_count = 0;
} else {
command_table.descriptors[scatter_entry_index].byte_count = PAGE_SIZE - 1;
data_transfer_count -= PAGE_SIZE;
}
scatter_entry_index++;
}
command_table.descriptors[scatter_entry_index].byte_count = (PAGE_SIZE - 1) | (1 << 31);
memset(const_cast<u8*>(command_table.atapi_command), 0, 32);
auto& fis = *(volatile FIS::HostToDevice::Register*)command_table.command_fis;
fis.header.fis_type = (u8)FIS::Type::RegisterHostToDevice;
if (is_atapi_attached()) {
fis.command = ATA_CMD_PACKET;
TODO();
} else {
if (direction == AsyncBlockDeviceRequest::RequestType::Write)
fis.command = ATA_CMD_WRITE_DMA_EXT;
else
fis.command = ATA_CMD_READ_DMA_EXT;
}
full_memory_barrier();
fis.device = ATA_USE_LBA_ADDRESSING;
fis.header.port_muliplier = (u8)FIS::HeaderAttributes::C;
fis.lba_high[0] = (lba >> 24) & 0xff;
fis.lba_high[1] = (lba >> 32) & 0xff;
fis.lba_high[2] = (lba >> 40) & 0xff;
fis.lba_low[0] = lba & 0xff;
fis.lba_low[1] = (lba >> 8) & 0xff;
fis.lba_low[2] = (lba >> 16) & 0xff;
fis.count = (block_count);
// The below loop waits until the port is no longer busy before issuing a new command
if (!spin_until_ready())
return false;
full_memory_barrier();
mark_command_header_ready_to_process(unused_command_header.value());
full_memory_barrier();
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Do a {}, lba {}, block count {} @ {}, ended", representative_port_index(), direction == AsyncBlockDeviceRequest::RequestType::Write ? "write" : "read", lba, block_count, m_dma_buffers[0].paddr());
return true;
}
bool AHCIPort::identify_device(SpinlockLocker<Spinlock>& main_lock)
{
VERIFY(m_lock.is_locked());
VERIFY(is_operable());
if (!spin_until_ready())
return false;
auto unused_command_header = try_to_find_unused_command_header();
VERIFY(unused_command_header.has_value());
auto* command_list_entries = (volatile AHCI::CommandHeader*)m_command_list_region->vaddr().as_ptr();
command_list_entries[unused_command_header.value()].ctba = m_command_table_pages[unused_command_header.value()].paddr().get();
command_list_entries[unused_command_header.value()].ctbau = 0;
command_list_entries[unused_command_header.value()].prdbc = 512;
command_list_entries[unused_command_header.value()].prdtl = 1;
// Note: we must set the correct Dword count in this register. Real hardware AHCI controllers do care about this field!
// QEMU doesn't care if we don't set the correct CFL field in this register, real hardware will set an handshake error bit in PxSERR register.
command_list_entries[unused_command_header.value()].attributes = (size_t)FIS::DwordCount::RegisterHostToDevice | AHCI::CommandHeaderAttributes::P;
auto command_table_region = MM.allocate_kernel_region(m_command_table_pages[unused_command_header.value()].paddr().page_base(), Memory::page_round_up(sizeof(AHCI::CommandTable)), "AHCI Command Table", Memory::Region::Access::ReadWrite).release_value();
auto& command_table = *(volatile AHCI::CommandTable*)command_table_region->vaddr().as_ptr();
memset(const_cast<u8*>(command_table.command_fis), 0, 64);
command_table.descriptors[0].base_high = 0;
command_table.descriptors[0].base_low = m_parent_handler->get_identify_metadata_physical_region(m_port_index).get();
command_table.descriptors[0].byte_count = 512 - 1;
auto& fis = *(volatile FIS::HostToDevice::Register*)command_table.command_fis;
fis.header.fis_type = (u8)FIS::Type::RegisterHostToDevice;
fis.command = m_port_registers.sig == AHCI::DeviceSignature::ATAPI ? ATA_CMD_IDENTIFY_PACKET : ATA_CMD_IDENTIFY;
fis.device = 0;
fis.header.port_muliplier = fis.header.port_muliplier | (u8)FIS::HeaderAttributes::C;
// The below loop waits until the port is no longer busy before issuing a new command
if (!spin_until_ready())
return false;
// FIXME: Find a better way to send IDENTIFY DEVICE and getting an interrupt!
{
main_lock.unlock();
VERIFY_INTERRUPTS_ENABLED();
full_memory_barrier();
m_wait_for_completion = true;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Marking command header at index {} as ready to identify device", representative_port_index(), unused_command_header.value());
m_port_registers.ci = 1 << unused_command_header.value();
full_memory_barrier();
while (1) {
if (m_port_registers.serr != 0) {
dbgln("AHCI Port {}: Identify failed, SError {:#08x}", representative_port_index(), (u32)m_port_registers.serr);
try_disambiguate_sata_error();
return false;
}
if (!m_wait_for_completion)
break;
}
main_lock.lock();
}
return true;
}
bool AHCIPort::shutdown()
{
MutexLocker locker(m_lock);
SpinlockLocker lock(m_hard_lock);
rebase();
set_interface_state(AHCI::DeviceDetectionInitialization::DisableInterface);
return true;
}
Optional<u8> AHCIPort::try_to_find_unused_command_header()
{
VERIFY(m_lock.is_locked());
u32 commands_issued = m_port_registers.ci;
for (size_t index = 0; index < 32; index++) {
if (!(commands_issued & 1)) {
dbgln_if(AHCI_DEBUG, "AHCI Port {}: unused command header at index {}", representative_port_index(), index);
return index;
}
commands_issued >>= 1;
}
return {};
}
void AHCIPort::start_command_list_processing() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
VERIFY(is_operable());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Starting command list processing.", representative_port_index());
m_port_registers.cmd = m_port_registers.cmd | 1;
}
void AHCIPort::mark_command_header_ready_to_process(u8 command_header_index) const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
VERIFY(is_operable());
VERIFY(!m_wait_for_completion);
m_wait_for_completion = true;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Marking command header at index {} as ready to process.", representative_port_index(), command_header_index);
m_port_registers.ci = 1 << command_header_index;
}
void AHCIPort::stop_command_list_processing() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Stopping command list processing.", representative_port_index());
m_port_registers.cmd = m_port_registers.cmd & 0xfffffffe;
}
void AHCIPort::start_fis_receiving() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Starting FIS receiving.", representative_port_index());
m_port_registers.cmd = m_port_registers.cmd | (1 << 4);
}
void AHCIPort::power_on() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Power on. Cold presence detection? {}", representative_port_index(), (bool)(m_port_registers.cmd & (1 << 20)));
if (!(m_port_registers.cmd & (1 << 20)))
return;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Powering on device.", representative_port_index());
m_port_registers.cmd = m_port_registers.cmd | (1 << 2);
}
void AHCIPort::spin_up() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Spin up. Staggered spin up? {}", representative_port_index(), m_parent_handler->hba_capabilities().staggered_spin_up_supported);
if (!m_parent_handler->hba_capabilities().staggered_spin_up_supported)
return;
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Spinning up device.", representative_port_index());
m_port_registers.cmd = m_port_registers.cmd | (1 << 1);
}
void AHCIPort::stop_fis_receiving() const
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Stopping FIS receiving.", representative_port_index());
m_port_registers.cmd = m_port_registers.cmd & 0xFFFFFFEF;
}
bool AHCIPort::initiate_sata_reset(SpinlockLocker<Spinlock>& main_lock)
{
VERIFY(m_lock.is_locked());
VERIFY(m_hard_lock.is_locked());
dbgln_if(AHCI_DEBUG, "AHCI Port {}: Initiate SATA reset", representative_port_index());
stop_command_list_processing();
full_memory_barrier();
size_t retry = 0;
// Try to wait 1 second for HBA to clear Command List Running
while (retry < 5000) {
if (!(m_port_registers.cmd & (1 << 15)))
break;
// The AHCI specification says to wait now a 500 milliseconds
IO::delay(100);
retry++;
}
full_memory_barrier();
spin_up();
full_memory_barrier();
set_interface_state(AHCI::DeviceDetectionInitialization::PerformInterfaceInitializationSequence);
// The AHCI specification says to wait now a 1 millisecond
IO::delay(1000);
// FIXME: Find a better way to opt-out temporarily from Scoped locking!
{
main_lock.unlock();
VERIFY_INTERRUPTS_ENABLED();
full_memory_barrier();
set_interface_state(AHCI::DeviceDetectionInitialization::NoActionRequested);
full_memory_barrier();
if (m_wait_connect_for_completion) {
retry = 0;
while (retry < 100000) {
if (is_phy_enabled())
break;
IO::delay(10);
retry++;
}
}
main_lock.lock();
}
dmesgln("AHCI Port {}: {}", representative_port_index(), try_disambiguate_sata_status());
full_memory_barrier();
clear_sata_error_register();
return (m_port_registers.ssts & 0xf) == 3;
}
void AHCIPort::set_interface_state(AHCI::DeviceDetectionInitialization requested_action)
{
switch (requested_action) {
case AHCI::DeviceDetectionInitialization::NoActionRequested:
m_port_registers.sctl = (m_port_registers.sctl & 0xfffffff0);
return;
case AHCI::DeviceDetectionInitialization::PerformInterfaceInitializationSequence:
m_port_registers.sctl = (m_port_registers.sctl & 0xfffffff0) | 1;
return;
case AHCI::DeviceDetectionInitialization::DisableInterface:
m_port_registers.sctl = (m_port_registers.sctl & 0xfffffff0) | 4;
return;
}
VERIFY_NOT_REACHED();
}
}
Reference in New Issue View Git Blame Copy Permalink