NixOS/mobile-nixos
1
1
Fork 0
mirror of https://github.com/NixOS/mobile-nixos.git synced 2024-12-21 15:01:36 +03:00
Code Issues Projects Releases Wiki Activity
64cb6ec46f
mobile-nixos/devices/pine64-pinephone-braveheart/u-boot/minimal-crust-support.patch
Samuel Dionne-Riel 64cb6ec46f pine64-pinephone-braveheart: u-boot: * -> 2020.07 + patches 
This way we're building with a limited change set, compared to using a
full-blown fork.

In theory the chosen change set gives us the ability to use the Crust
alternative firmware.

 * https://github.com/crust-firmware/
2020-08-15 00:25:05 -04:00

5794 lines
151 KiB
Diff
Raw Blame History

From 09e32c7ff82f7b45a8dc9c77e2fc60d73ff8acd2 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 30 May 2020 03:00:42 -0500
Subject: [PATCH 01/17] clk: sunxi: Add a dummy clock driver for the RTC
The 32kHz clock ("LOSC") on sunxi SoCs is provided by the RTC. It is
used, among other things, by the XHCI controller in the H6. To be able
to call clk_get_bulk() on the XHCI controller, some device needs to
provide all referenced clocks.
Since LOSC is a fixed-rate always-on clock, implementation is trivial.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk_rtc.c | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 drivers/clk/sunxi/clk_rtc.c
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 36fb2aeb56..3394aa6de8 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -5,6 +5,7 @@
#
obj-$(CONFIG_CLK_SUNXI) += clk_sunxi.o
+obj-$(CONFIG_CLK_SUNXI) += clk_rtc.o
obj-$(CONFIG_CLK_SUN4I_A10) += clk_a10.o
obj-$(CONFIG_CLK_SUN5I_A10S) += clk_a10s.o
diff --git a/drivers/clk/sunxi/clk_rtc.c b/drivers/clk/sunxi/clk_rtc.c
new file mode 100644
index 0000000000..bbbfe8793f
--- /dev/null
+++ b/drivers/clk/sunxi/clk_rtc.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <clk-uclass.h>
+#include <dm.h>
+
+static int clk_sun6i_rtc_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static const struct clk_ops clk_sun6i_rtc_ops = {
+ .enable = clk_sun6i_rtc_enable,
+};
+
+static const struct udevice_id sun6i_rtc_ids[] = {
+ { .compatible = "allwinner,sun6i-a31-rtc" },
+ { .compatible = "allwinner,sun8i-a23-rtc" },
+ { .compatible = "allwinner,sun8i-h3-rtc" },
+ { .compatible = "allwinner,sun8i-r40-rtc" },
+ { .compatible = "allwinner,sun8i-v3-rtc" },
+ { .compatible = "allwinner,sun50i-h5-rtc" },
+ { .compatible = "allwinner,sun50i-h6-rtc" },
+ { }
+};
+
+U_BOOT_DRIVER(clk_sun6i_rtc) = {
+ .name = "clk_sun6i_rtc",
+ .id = UCLASS_CLK,
+ .of_match = sun6i_rtc_ids,
+ .ops = &clk_sun6i_rtc_ops,
+};
--
2.25.4
From 3148980d49864d686206f8f2921eb5954e378dd5 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 30 May 2020 02:57:04 -0500
Subject: [PATCH 02/17] usb: xhci-dwc3: Add support for clocks/resets
Some platforms, like the Allwinner H6, do not have a separate glue layer
around the dwc3. Instead, they rely on the clocks/resets/phys referenced
from the dwc3 DT node itself. Add support for enabling the clocks/resets
referenced from the dwc3 DT node.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/usb/host/xhci-dwc3.c | 56 ++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 27f84102db..80302b8223 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -7,10 +7,12 @@
* Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
*/
+#include <clk.h>
#include <common.h>
#include <dm.h>
#include <generic-phy.h>
#include <log.h>
+#include <reset.h>
#include <usb.h>
#include <dwc3-uboot.h>
#include <linux/delay.h>
@@ -21,7 +23,9 @@
#include <linux/usb/otg.h>
struct xhci_dwc3_platdata {
+ struct clk_bulk clks;
struct phy_bulk phys;
+ struct reset_ctl_bulk resets;
};
void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
@@ -111,6 +115,46 @@ void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val)
}
#if CONFIG_IS_ENABLED(DM_USB)
+static int xhci_dwc3_reset_init(struct udevice *dev,
+ struct xhci_dwc3_platdata *plat)
+{
+ int ret;
+
+ ret = reset_get_bulk(dev, &plat->resets);
+ if (ret == -ENOTSUPP || ret == -ENOENT)
+ return 0;
+ else if (ret)
+ return ret;
+
+ ret = reset_deassert_bulk(&plat->resets);
+ if (ret) {
+ reset_release_bulk(&plat->resets);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int xhci_dwc3_clk_init(struct udevice *dev,
+ struct xhci_dwc3_platdata *plat)
+{
+ int ret;
+
+ ret = clk_get_bulk(dev, &plat->clks);
+ if (ret == -ENOSYS || ret == -ENOENT)
+ return 0;
+ if (ret)
+ return ret;
+
+ ret = clk_enable_bulk(&plat->clks);
+ if (ret) {
+ clk_release_bulk(&plat->clks);
+ return ret;
+ }
+
+ return 0;
+}
+
static int xhci_dwc3_probe(struct udevice *dev)
{
struct xhci_hcor *hcor;
@@ -122,6 +166,14 @@ static int xhci_dwc3_probe(struct udevice *dev)
u32 reg;
int ret;
+ ret = xhci_dwc3_clk_init(dev, plat);
+ if (ret)
+ return ret;
+
+ ret = xhci_dwc3_reset_init(dev, plat);
+ if (ret)
+ return ret;
+
hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
hcor = (struct xhci_hcor *)((uintptr_t)hccr +
HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
@@ -171,6 +223,10 @@ static int xhci_dwc3_remove(struct udevice *dev)
dwc3_shutdown_phy(dev, &plat->phys);
+ reset_release_bulk(&plat->resets);
+
+ clk_release_bulk(&plat->clks);
+
return xhci_deregister(dev);
}
--
2.25.4
From 45f8ac02615d6f0ee041a60bb09ca7eb658a32b0 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 30 May 2020 03:07:12 -0500
Subject: [PATCH 03/17] configs: Add a config for the Orange Pi 3
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
configs/orangepi_3_defconfig | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
create mode 100644 configs/orangepi_3_defconfig
diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
new file mode 100644
index 0000000000..c9b9725960
--- /dev/null
+++ b/configs/orangepi_3_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3"
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
--
2.25.4
From 4fe434775ae20658b1611e4a2d5c0c87388ea7ad Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Wed, 6 May 2020 18:14:44 -0500
Subject: [PATCH 04/17] spl: fit: Minimally parse OS properties with
FIT_IMAGE_TINY
Some boards, specifically 64-bit Allwinner boards (sun50i), are
extremely limited on SPL size. One strategy that was used to make space
was to remove the FIT "os" property parsing code, because it uses a
rather large lookup table.
However, this forces the legacy FIT parsing code path, which requires
the "firmware" entry in the FIT to reference the U-Boot binary, even if
U-Boot is not the next binary in the boot sequence (for example, on
sun50i boards, ATF is run first).
This prevents the same FIT image from being used with a SPL with
CONFIG_SPL_FIT_IMAGE_TINY=n and CONFIG_SPL_ATF=y, because the boot
method selection code looks at `spl_image.os`, which is only set from
the "firmware" entry's "os" property.
To be able to use CONFIG_SPL_ATF=y, the "firmware" entry in the FIT
must be ATF, and U-Boot must be a loadable. For this to work, we need to
parse the "os" property just enough to tell U-Boot from other images, so
we can find it in the loadables list to append the FDT, and so we don't
try to append the FDT to ATF (which could clobber adjacent firmware).
So add the minimal code necessary to distinguish U-Boot/non-U-Boot
loadables with CONFIG_SPL_FIT_IMAGE_TINY=y. This adds about 300 bytes,
much less than the 7400 bytes added by CONFIG_SPL_FIT_IMAGE_TINY=n.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
common/spl/Kconfig | 4 +---
common/spl/spl_fit.c | 17 ++++++++++++++++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 8ece9057b1..7f40ddb7a5 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -449,9 +449,7 @@ config SPL_FIT_IMAGE_TINY
Enable this to reduce the size of the FIT image loading code
in SPL, if space for the SPL binary is very tight.
- This removes the detection of image types (which forces the
- first image to be treated as having a U-Boot style calling
- convention) and skips the recording of each loaded payload
+ This skips the recording of each loaded payload
(i.e. loadable) into the FDT (modifying the loaded FDT to
ensure this information is available to the next image
invoked).
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index f581a22421..10cc11e128 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -466,7 +466,22 @@ static int spl_fit_record_loadable(const void *fit, int images, int index,
static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
{
#if CONFIG_IS_ENABLED(FIT_IMAGE_TINY) && !defined(CONFIG_SPL_OS_BOOT)
- return -ENOTSUPP;
+ const char *name = fdt_getprop(fit, noffset, FIT_OS_PROP, NULL);
+
+ if (!name)
+ return -ENOENT;
+
+ /*
+ * We don't care what the type of the image actually is,
+ * only whether or not it is U-Boot. This saves some
+ * space by omitting the large table of OS types.
+ */
+ if (!strcmp(name, "u-boot"))
+ *os = IH_OS_U_BOOT;
+ else
+ *os = IH_OS_INVALID;
+
+ return 0;
#else
return fit_image_get_os(fit, noffset, os);
#endif
--
2.25.4
From 1b4e87017adbd411652c8284cfea460f36135774 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Fri, 15 Dec 2017 07:37:40 -0600
Subject: [PATCH 05/17] mksunxi_fit_atf.sh: Update FIT component descriptions
Since commit d879616e9e64 ("spl: fit: simplify logic for FDT loading for
non-OS boots"), the SPL looks at the "os" properties of FIT images to
determine where to append the FDT.
The "os" property of the "firmware" image also determines how to execute
the next stage of the boot process, as in 1d3790905d9c ("spl: atf:
introduce spl_invoke_atf and make bl31_entry private").
To support this additional functionality, and to properly model the boot
process, where ATF runs before U-Boot, add the "os" properties and swap
the firmware/loadable images in the FIT image.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/mksunxi_fit_atf.sh | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh
index 88ad719747..4dfd22db78 100755
--- a/board/sunxi/mksunxi_fit_atf.sh
+++ b/board/sunxi/mksunxi_fit_atf.sh
@@ -31,6 +31,7 @@ cat << __HEADER_EOF
description = "U-Boot (64-bit)";
data = /incbin/("u-boot-nodtb.bin");
type = "standalone";
+ os = "u-boot";
arch = "arm64";
compression = "none";
load = <0x4a000000>;
@@ -39,6 +40,7 @@ cat << __HEADER_EOF
description = "ARM Trusted Firmware";
data = /incbin/("$BL31");
type = "firmware";
+ os = "arm-trusted-firmware";
arch = "arm64";
compression = "none";
load = <$BL31_ADDR>;
@@ -73,8 +75,8 @@ do
cat << __CONF_SECTION_EOF
config_$cnt {
description = "$(basename $dtname .dtb)";
- firmware = "uboot";
- loadables = "atf";
+ firmware = "atf";
+ loadables = "uboot";
fdt = "fdt_$cnt";
};
__CONF_SECTION_EOF
--
2.25.4
From ba379404b6fb6dc47e4490d2b9426ce7d8753cca Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Fri, 15 Dec 2017 09:21:16 -0600
Subject: [PATCH 06/17] sunxi: Add support for including SCP firmware
Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a
System Control Processor, or SCP. ARM Trusted Firmware (ATF)
communicates with the SCP over SCPI to implement the PSCI system suspend
and shutdown functionality. Currently, SCP firmware is optional; the
system will boot and run without it, but system suspend will be
unavailable.
Since all communication with the SCP is mediated by ATF, the only thing
U-Boot needs to do is load the firmware into SRAM. The SCP firmware
occupies the last 16KiB of SRAM A2, immediately following ATF.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/README.sunxi64 | 43 ++++++++++++++++++++++++++++------
board/sunxi/mksunxi_fit_atf.sh | 23 +++++++++++++++---
2 files changed, 56 insertions(+), 10 deletions(-)
diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64
index 258921af22..9a67e5301e 100644
--- a/board/sunxi/README.sunxi64
+++ b/board/sunxi/README.sunxi64
@@ -14,8 +14,12 @@ Quick Start / Overview
- Build the ARM Trusted Firmware binary (see "ARM Trusted Firmware (ATF)" below)
$ cd /src/arm-trusted-firmware
$ make PLAT=sun50i_a64 DEBUG=1 bl31
+- Build the SCP firmware binary (see "SCP firmware (Crust)" below)
+ $ cd /src/crust
+ $ make pine64_plus_defconfig && make -j5 scp
- Build U-Boot (see "SPL/U-Boot" below)
$ export BL31=/path/to/bl31.bin
+ $ export SCP=/src/crust/build/scp/scp.bin
$ make pine64_plus_defconfig && make -j5
- Transfer to an uSD card (see "microSD card" below)
$ dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1
@@ -24,13 +28,17 @@ Quick Start / Overview
Building the firmware
=====================
-The Allwinner A64/H5 firmware consists of three parts: U-Boot's SPL, an
-ARM Trusted Firmware (ATF) build and the U-Boot proper.
-The SPL will load both ATF and U-Boot proper along with the right device
-tree blob (.dtb) and will pass execution to ATF (in EL3), which in turn will
-drop into the U-Boot proper (in EL2).
-As the ATF binary will become part of the U-Boot image file, you will need
-to build it first.
+The Allwinner A64/H5/H6 firmware consists of several parts: U-Boot's SPL,
+ARM Trusted Firmware (ATF), optional System Control Processor (SCP) firmware
+(e.g. Crust), and the U-Boot proper.
+
+The SPL will load all of the other firmware binaries into RAM, along with the
+right device tree blob (.dtb), and will pass execution to ATF (in EL3). If SCP
+firmware was loaded, ATF will power on the SCP and wait for it to boot.
+ATF will then drop into U-Boot proper (in EL2).
+
+As the ATF binary and SCP firmware will become part of the U-Boot image file,
+you will need to build them first.
ARM Trusted Firmware (ATF)
----------------------------
@@ -53,6 +61,27 @@ As sometimes the ATF build process is a bit picky about the toolchain used,
or if you can't be bothered with building ATF, there are known working
binaries in the firmware repository[3], purely for convenience reasons.
+ SCP firmware (Crust)
+----------------------
+SCP firmware is responsible for implementing system suspend/resume, and (on
+boards without a PMIC) soft poweroff/on. ATF contains fallback code for CPU
+power control, so SCP firmware is optional if you don't need either of these
+features. It runs on the AR100, with is an or1k CPU, not ARM, so it needs a
+different cross toolchain.
+
+There is one SCP firmware implementation currently available, Crust:
+$ git clone https://github.com/crust-firmware/crust
+$ cd crust
+$ export CROSS_COMPILE=or1k-linux-musl-
+$ make pine64_plus_defconfig
+$ make scp
+
+The same configuration generally works on any board with the same SoC (A64, H5,
+or H6), so if there is no config for your board, use one for a similar board.
+
+Like for ATF, U-Boot finds the SCP firmware binary via an environment variable:
+$ export SCP=/src/crust/build/scp/scp.bin
+
SPL/U-Boot
------------
Both U-Boot proper and the SPL are using the 64-bit mode. As the boot ROM
diff --git a/board/sunxi/mksunxi_fit_atf.sh b/board/sunxi/mksunxi_fit_atf.sh
index 4dfd22db78..07a2e619ee 100755
--- a/board/sunxi/mksunxi_fit_atf.sh
+++ b/board/sunxi/mksunxi_fit_atf.sh
@@ -1,11 +1,12 @@
#!/bin/sh
#
-# script to generate FIT image source for 64-bit sunxi boards with
-# ARM Trusted Firmware and multiple device trees (given on the command line)
+# script to generate FIT image source for 64-bit sunxi boards with ARM Trusted
+# Firmware, SCP firmware, and multiple device trees (given on the command line)
#
# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
[ -z "$BL31" ] && BL31="bl31.bin"
+[ -z "$SCP" ] && SCP="scp.bin"
if [ ! -f $BL31 ]; then
echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
@@ -13,10 +14,18 @@ if [ ! -f $BL31 ]; then
BL31=/dev/null
fi
+if [ ! -f $SCP ]; then
+ echo "WARNING: SCP firmware file $SCP NOT found, system suspend will be unavailable" >&2
+ echo "Please read the section on SCP firmware in board/sunxi/README.sunxi64" >&2
+ SCP=/dev/null
+fi
+
if grep -q "^CONFIG_MACH_SUN50I_H6=y" .config; then
BL31_ADDR=0x104000
+ SCP_ADDR=0x114000
else
BL31_ADDR=0x44000
+ SCP_ADDR=0x50000
fi
cat << __HEADER_EOF
@@ -46,6 +55,14 @@ cat << __HEADER_EOF
load = <$BL31_ADDR>;
entry = <$BL31_ADDR>;
};
+ scp {
+ description = "SCP firmware";
+ data = /incbin/("$SCP");
+ type = "firmware";
+ arch = "or1k";
+ compression = "none";
+ load = <$SCP_ADDR>;
+ };
__HEADER_EOF
cnt=1
@@ -76,7 +93,7 @@ do
config_$cnt {
description = "$(basename $dtname .dtb)";
firmware = "atf";
- loadables = "uboot";
+ loadables = "scp", "uboot";
fdt = "fdt_$cnt";
};
__CONF_SECTION_EOF
--
2.25.4
From bf506720ccf3773f2c323c5c141cce61ad6ebb4d Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Thu, 7 May 2020 18:46:04 -0500
Subject: [PATCH 07/17] sunxi: DT: A64: update device tree files
Import updated device trees from Linux v5.7-rc4. This picks up new
hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI
files for the Pinebook and the Teres-I, since the ANX6345 bridge is
now supported upstream.
A couple of headers needed updates for recently-added hardware support.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/axp803.dtsi | 82 +--
arch/arm/dts/sun50i-a64-amarula-relic.dts | 109 +++-
arch/arm/dts/sun50i-a64-bananapi-m64.dts | 118 ++--
arch/arm/dts/sun50i-a64-cpu-opp.dtsi | 75 +++
arch/arm/dts/sun50i-a64-nanopi-a64.dts | 70 +--
.../dts/sun50i-a64-oceanic-5205-5inmfd.dts | 31 +-
arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 12 +-
arch/arm/dts/sun50i-a64-olinuxino.dts | 104 ++--
arch/arm/dts/sun50i-a64-orangepi-win.dts | 127 +++--
arch/arm/dts/sun50i-a64-pine64-lts.dts | 7 +-
arch/arm/dts/sun50i-a64-pine64-plus.dts | 52 +-
arch/arm/dts/sun50i-a64-pine64.dts | 97 ++--
arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 17 -
arch/arm/dts/sun50i-a64-pinebook.dts | 237 ++++++--
arch/arm/dts/sun50i-a64-pinephone-1.0.dts | 11 +
arch/arm/dts/sun50i-a64-pinephone-1.1.dts | 11 +
arch/arm/dts/sun50i-a64-pinephone.dtsi | 379 +++++++++++++
arch/arm/dts/sun50i-a64-pinetab.dts | 460 ++++++++++++++++
arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 113 ++--
arch/arm/dts/sun50i-a64-sopine.dtsi | 69 +--
arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi | 41 --
arch/arm/dts/sun50i-a64-teres-i.dts | 138 ++++-
arch/arm/dts/sun50i-a64.dtsi | 516 +++++++++++++++---
include/dt-bindings/clock/sun50i-a64-ccu.h | 4 +-
include/dt-bindings/clock/sun8i-de2.h | 3 +
include/dt-bindings/reset/sun8i-de2.h | 1 +
27 files changed, 2266 insertions(+), 621 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-cpu-opp.dtsi
delete mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1.0.dts
create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1.1.dts
create mode 100644 arch/arm/dts/sun50i-a64-pinephone.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-pinetab.dts
delete mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9900b44274..38a31589ba 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -593,6 +593,9 @@ dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb \
sun50i-a64-pinebook.dtb \
+ sun50i-a64-pinephone-1.0.dtb \
+ sun50i-a64-pinephone-1.1.dtb \
+ sun50i-a64-pinetab.dtb \
sun50i-a64-sopine-baseboard.dtb \
sun50i-a64-teres-i.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
diff --git a/arch/arm/dts/axp803.dtsi b/arch/arm/dts/axp803.dtsi
index e5eae8bafc..10e9186a76 100644
--- a/arch/arm/dts/axp803.dtsi
+++ b/arch/arm/dts/axp803.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
/*
* AXP803 Integrated Power Management Chip
@@ -49,6 +10,39 @@
interrupt-controller;
#interrupt-cells = <1>;
+ ac_power_supply: ac-power-supply {
+ compatible = "x-powers,axp803-ac-power-supply",
+ "x-powers,axp813-ac-power-supply";
+ status = "disabled";
+ };
+
+ axp_adc: adc {
+ compatible = "x-powers,axp803-adc", "x-powers,axp813-adc";
+ #io-channel-cells = <1>;
+ };
+
+ axp_gpio: gpio {
+ compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio0_ldo: gpio0-ldo {
+ pins = "GPIO0";
+ function = "ldo";
+ };
+
+ gpio1_ldo: gpio1-ldo {
+ pins = "GPIO1";
+ function = "ldo";
+ };
+ };
+
+ battery_power_supply: battery-power-supply {
+ compatible = "x-powers,axp803-battery-power-supply",
+ "x-powers,axp813-battery-power-supply";
+ status = "disabled";
+ };
+
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <3000>;
@@ -152,4 +146,10 @@
status = "disabled";
};
};
+
+ usb_power_supply: usb-power-supply {
+ compatible = "x-powers,axp803-usb-power-supply",
+ "x-powers,axp813-usb-power-supply";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts
index 6cb2b7f0c8..c7bd73f35e 100644
--- a/arch/arm/dts/sun50i-a64-amarula-relic.dts
+++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts
@@ -1,12 +1,11 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -22,6 +21,41 @@
stdout-path = "serial0:115200n8";
};
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_aldo1>;
+ DOVDD-supply = <&reg_dldo3>;
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */
+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+ };
+
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc 1>;
@@ -30,10 +64,70 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+ status = "okay";
+
+ port {
+ csi_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
&ehci0 {
status = "okay";
};
+&i2c0 {
+ status = "okay";
+
+ sensor@48 {
+ compatible = "st,stlm75";
+ reg = <0x48>;
+ };
+};
+
+&i2c0_pins {
+ bias-pull-up;
+};
+
+&i2c1 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt5663";
+ reg = <0x5d>;
+ AVDD28-supply = <&reg_ldo_io0>; /* VCC-CTP: GPIO0-LDO */
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+};
+
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
@@ -197,6 +291,13 @@
regulator-name = "vdd-cpus";
};
+&reg_ldo_io0 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-ctp";
+ status = "okay";
+};
+
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
index ef1c90401b..883f217efb 100644
--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -94,9 +56,40 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -130,8 +123,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
@@ -207,6 +198,14 @@
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
/*
* This regulator also drives the PE pingroup GPIOs,
@@ -326,6 +325,22 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ status = "okay";
+ simple-audio-card,widgets = "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Headphone Jack", "HP",
+ "MIC2", "Microphone Jack",
+ "Onboard Microphone", "MBIAS",
+ "MIC1", "Onboard Microphone";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
@@ -335,7 +350,19 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo2>;
+ vddio-supply = <&reg_dldo4>;
+ device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
};
&usb_otg {
@@ -343,8 +370,13 @@
status = "okay";
};
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-a64-cpu-opp.dtsi b/arch/arm/dts/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 0000000000..578c37490d
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-648000000 {
+ opp-hz = /bits/ 64 <648000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-912000000 {
+ opp-hz = /bits/ 64 <912000000>;
+ opp-microvolt = <1120000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-960000000 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-microvolt = <1160000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ opp-microvolt = <1240000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1104000000 {
+ opp-hz = /bits/ 64 <1104000000>;
+ opp-microvolt = <1260000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+
+ opp-1152000000 {
+ opp-hz = /bits/ 64 <1152000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
index 31884dbc88..e58db8a6ca 100644
--- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -87,6 +49,22 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&de {
status = "okay";
};
@@ -120,12 +98,6 @@
};
/* i2c1 connected with gpio headers like pine64, bananapi */
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "disabled";
-};
-
&i2c1_pins {
bias-pull-up;
};
@@ -186,6 +158,10 @@
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
index 6a2154525d..577f9e1d08 100644
--- a/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/arch/arm/dts/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -1,9 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Oceanic Systems (UK) Ltd.
- * Copyright (C) 2019 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
/dts-v1/;
@@ -37,6 +35,22 @@
status = "okay";
};
+&i2c0 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ AVDD28-supply = <&reg_ldo_io0>; /* VDD_CTP: GPIO0-LDO */
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
+ reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@@ -52,6 +66,13 @@
regulator-name = "vcc-phy";
};
+&reg_ldo_io0 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vdd-ctp";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts b/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
index 96ab0227e8..efb20846de 100644
--- a/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
+++ b/arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
@@ -1,8 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
- * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
- */
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
#include "sun50i-a64-olinuxino.dts"
@@ -15,9 +13,13 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&reg_dcdc1>;
- vqmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_eldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
+
+&pio {
+ vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts b/arch/arm/dts/sun50i-a64-olinuxino.dts
index f7a4bccaa5..5fa9ca0191 100644
--- a/arch/arm/dts/sun50i-a64-olinuxino.dts
+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -87,6 +49,22 @@
};
};
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&de {
status = "okay";
};
@@ -140,7 +118,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&reg_aldo2>;
+ vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -163,6 +141,34 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo2>;
+ */
+};
+
+&pio {
+ vcc-pa-supply = <&reg_dcdc1>;
+ vcc-pb-supply = <&reg_dcdc1>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_dldo4>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
&r_rsb {
status = "okay";
@@ -175,8 +181,22 @@
};
};
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/* vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <2800000>;
diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
index b0c64f7579..fde9c7a99b 100644
--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
@@ -1,49 +1,11 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -109,9 +71,40 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -170,6 +163,14 @@
bus-width = <4>;
non-removable;
status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
};
&ohci0 {
@@ -180,6 +181,10 @@
status = "okay";
};
+&r_ir {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
@@ -188,11 +193,20 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -310,6 +324,22 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ status = "okay";
+ simple-audio-card,widgets = "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Headphone Jack", "HP",
+ "MIC2", "Microphone Jack",
+ "Onboard Microphone", "MBIAS",
+ "MIC1", "Onboard Microphone";
+};
+
&spi0 {
status = "okay";
@@ -333,7 +363,20 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <1500000>;
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo2>;
+ vddio-supply = <&reg_dldo4>;
+ device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
};
/* On Pi-2 connector, RTS/CTS optional */
diff --git a/arch/arm/dts/sun50i-a64-pine64-lts.dts b/arch/arm/dts/sun50i-a64-pine64-lts.dts
index 72d6961dc3..302e24be0a 100644
--- a/arch/arm/dts/sun50i-a64-pine64-lts.dts
+++ b/arch/arm/dts/sun50i-a64-pine64-lts.dts
@@ -1,8 +1,5 @@
-/*
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- *
- * Copyright (c) 2018 ARM Ltd.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
#include "sun50i-a64-sopine-baseboard.dts"
diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
index 24f1aac366..b26181cf90 100644
--- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
+++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
#include "sun50i-a64-pine64.dts"
@@ -63,3 +24,12 @@
reg = <1>;
};
};
+
+&reg_dc1sw {
+ /*
+ * Ethernet PHY needs 30ms to properly power up and some more
+ * to initialize. 100ms should be plenty of time to finish
+ * whole process.
+ */
+ regulator-enable-ramp-delay = <100000>;
+};
diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts
index c077b6c1f4..2165f238af 100644
--- a/arch/arm/dts/sun50i-a64-pine64.dts
+++ b/arch/arm/dts/sun50i-a64-pine64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -75,6 +37,35 @@
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -109,8 +100,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
@@ -156,6 +145,14 @@
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
@@ -259,6 +256,20 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,widgets = "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "MIC2", "Microphone Jack";
+ status = "okay";
+};
+
/* On Euler connector */
&spdif {
status = "disabled";
diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
deleted file mode 100644
index 650ab97ec9..0000000000
--- a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- */
-
-#include "sunxi-u-boot.dtsi"
-
-/* The ANX6345 eDP-bridge is on r_i2c */
-&r_i2c {
- anx6345: edp-bridge@38 {
- compatible = "analogix,anx6345";
- reg = <0x38>;
- reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
- status = "okay";
- };
-};
diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts b/arch/arm/dts/sun50i-a64-pinebook.dts
index ec537c5297..64b1c54f87 100644
--- a/arch/arm/dts/sun50i-a64-pinebook.dts
+++ b/arch/arm/dts/sun50i-a64-pinebook.dts
@@ -1,15 +1,14 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- */
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
@@ -22,32 +21,17 @@
ethernet0 = &rtl8723cs;
};
- vdd_bl: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "bl-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
- enable-active-high;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 0>;
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
default-brightness-level = <2>;
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
- power-supply = <&vdd_bl>;
+ power-supply = <&reg_vbklt>;
};
chosen {
stdout-path = "serial0:115200n8";
-
- framebuffer-lcd {
- panel-supply = <&reg_dc1sw>;
- dvdd25-supply = <&reg_dldo2>;
- dvdd12-supply = <&reg_fldo1>;
- };
};
gpio_keys {
@@ -60,20 +44,85 @@
linux,code = <SW_LID>;
linux,can-disable;
wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ panel_edp: panel-edp {
+ compatible = "neweast,wjfh116008a";
+ backlight = <&backlight>;
+ power-supply = <&reg_dc1sw>;
+
+ port {
+ panel_edp_in: endpoint {
+ remote-endpoint = <&anx6345_out_edp>;
+ };
};
};
- reg_vcc3v3: vcc3v3 {
+ reg_vbklt: vbklt {
compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "vbklt";
+ regulator-min-microvolt = <18000000>;
+ regulator-max-microvolt = <18000000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ VCC-supply = <&reg_vcc5v0>;
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+ status = "okay";
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
@@ -86,11 +135,15 @@
status = "okay";
};
+&mixer0 {
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
disable-wp;
bus-width = <4>;
status = "okay";
@@ -133,10 +186,61 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_eldo1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pg-supply = <&reg_eldo1>;
+};
+
&pwm {
status = "okay";
};
+&r_i2c {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pl89_pins>;
+ status = "okay";
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_fldo1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345_in: port@0 {
+ reg = <0>;
+ anx6345_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+
+ anx6345_out: port@1 {
+ reg = <1>;
+ anx6345_out_edp: endpoint {
+ remote-endpoint = <&panel_edp_in>;
+ };
+ };
+ };
+ };
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo2>;
+ */
+};
+
&r_rsb {
status = "okay";
@@ -148,20 +252,18 @@
};
};
-/* The ANX6345 eDP-bridge is on r_i2c */
-&r_i2c {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&r_i2c_pl89_pins>;
+#include "axp803.dtsi"
+
+&ac_power_supply {
status = "okay";
};
-#include "axp803.dtsi"
+&battery_power_supply {
+ status = "okay";
+};
&reg_aldo1 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-name = "vcc-csi";
+ regulator-name = "vcc-pe";
};
&reg_aldo2 {
@@ -224,12 +326,6 @@
regulator-name = "vcc-edp";
};
-&reg_dldo3 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "avdd-csi";
-};
-
&reg_dldo4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -243,12 +339,6 @@
regulator-name = "cpvdd";
};
-&reg_eldo3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vdd-1v8-csi";
-};
-
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -262,21 +352,56 @@
regulator-name = "vdd-cpus";
};
-&reg_ldo_io0 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc-usb";
- status = "okay";
-};
-
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
+&simplefb_lcd {
+ panel-supply = <&reg_dc1sw>;
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_fldo1>;
+};
+
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+ "Microphone", "Internal Microphone Right",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone Left", "MBIAS",
+ "MIC1", "Internal Microphone Left",
+ "Internal Microphone Right", "HBIAS",
+ "MIC2", "Internal Microphone Right";
+};
+
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_anx6345: endpoint {
+ remote-endpoint = <&anx6345_in_tcon0>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
@@ -288,7 +413,7 @@
};
&usbphy {
- usb0_vbus-supply = <&reg_ldo_io0>;
- usb1_vbus-supply = <&reg_ldo_io0>;
+ usb0_vbus-supply = <&reg_vcc5v0>;
+ usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";
};
diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 0000000000..0c42272106
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+ model = "Pine64 PinePhone Developer Batch (1.0)";
+ compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 0000000000..06a775c416
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+ model = "Pine64 PinePhone Braveheart (1.1)";
+ compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
+};
diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi
new file mode 100644
index 0000000000..cefda145c3
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ };
+
+ green {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+ };
+
+ red {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ };
+ };
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+ vcc-supply = <&reg_dcdc1>;
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* Magnetometer */
+ lis3mdl@1e {
+ compatible = "st,lis3mdl-magn";
+ reg = <0x1e>;
+ vdd-supply = <&reg_dldo1>;
+ vddio-supply = <&reg_dldo1>;
+ };
+
+ /* Accelerometer/gyroscope */
+ mpu6050@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+ vdd-supply = <&reg_dldo1>;
+ vddio-supply = <&reg_dldo1>;
+ };
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <&reg_aldo3>;
+ status = "okay";
+
+ button-200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button-400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <&reg_dcdc1>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_dldo4>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo2>;
+ */
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_aldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-lcd-ctp-stk";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-1v8-typec";
+ status = "okay";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Headset Microphone",
+ "Microphone", "Internal Microphone",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Earpiece",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Headphone Jack", "HP",
+ "Internal Earpiece", "EARPIECE",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone", "MBIAS",
+ "MIC1", "Internal Microphone",
+ "Headset Microphone", "HBIAS",
+ "MIC2", "Headset Microphone";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64-pinetab.dts b/arch/arm/dts/sun50i-a64-pinetab.dts
new file mode 100644
index 0000000000..316e8a4439
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pinetab.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "PineTab";
+ compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &rtl8723cs;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+ default-brightness-level = <15>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ power-supply = <&vdd_bl>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ i2c-csi {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+ i2c-gpio,delay-us = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Rear camera */
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_mclk_pin>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_dldo3>;
+ DOVDD-supply = <&reg_aldo1>;
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+ };
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ vdd_bl: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "bl-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ hpvcc-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi_ep: endpoint {
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
+&dai {
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <&reg_dldo1>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <&reg_dc1sw>;
+ dvdd-supply = <&reg_dc1sw>;
+ cvdd-supply = <&reg_ldo_io1>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ backlight = <&backlight>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt9271";
+ reg = <0x5d>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ AVDD28-supply = <&reg_ldo_io1>;
+ };
+};
+
+&i2c0_pins {
+ bias-pull-up;
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+ vref-supply = <&reg_aldo3>;
+ status = "okay";
+
+ button-200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button-400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mixer1 {
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_dldo4>;
+ vqmmc-supply = <&reg_eldo1>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723cs: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pwm {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en;
+ };
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&reg_aldo1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+ regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
+&reg_eldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-usb";
+ status = "okay";
+};
+
+&reg_ldo_io1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <3500000>;
+ regulator-name = "vcc-touchscreen";
+ status = "okay";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&sound {
+ status = "okay";
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+ "Microphone", "Internal Microphone Right",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Internal Microphone Left", "MBIAS",
+ "MIC1", "Internal Microphone Left",
+ "Internal Microphone Right", "HBIAS",
+ "MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <&reg_drivevbus>;
+ usb1_vbus-supply = <&reg_ldo_io0>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
index 53fcc9098d..2f6ea9f3f6 100644
--- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+// Copyright (c) 2016 ARM Ltd.
/dts-v1/;
@@ -55,6 +15,10 @@
aliases {
ethernet0 = &emac;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
@@ -80,6 +44,26 @@
};
};
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -139,6 +123,12 @@
};
&reg_dc1sw {
+ /*
+ * Ethernet PHY needs 30ms to properly power up and some more
+ * to initialize. 100ms should be plenty of time to finish
+ * whole process.
+ */
+ regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-phy";
};
@@ -164,12 +154,47 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,widgets = "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "Headphone Jack", "HP",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "MIC2", "Microphone Jack";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+/* On Pi-2 connector */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
&usb_otg {
dr_mode = "host";
status = "okay";
diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi b/arch/arm/dts/sun50i-a64-sopine.dtsi
index 6723b8695e..c48692b06e 100644
--- a/arch/arm/dts/sun50i-a64-sopine.dtsi
+++ b/arch/arm/dts/sun50i-a64-sopine.dtsi
@@ -1,52 +1,33 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+// Copyright (c) 2016 ARM Ltd.
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
diff --git a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
deleted file mode 100644
index 1a64b7d09c..0000000000
--- a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- */
-
-#include "sunxi-u-boot.dtsi"
-
-/ {
- vdd_bl: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "bl-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
- enable-active-high;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 0>;
- brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
- default-brightness-level = <2>;
- enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
- power-supply = <&vdd_bl>;
- };
-};
-
-/* The ANX6345 eDP-bridge is on i2c */
-&i2c0 {
- anx6345: edp-bridge@38 {
- compatible = "analogix,anx6345";
- reg = <0x38>;
- reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
- status = "okay";
- };
-};
-
-&pwm {
- status = "okay";
-};
diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts
index c455b24dd0..f5df5f705b 100644
--- a/arch/arm/dts/sun50i-a64-teres-i.dts
+++ b/arch/arm/dts/sun50i-a64-teres-i.dts
@@ -1,13 +1,11 @@
-/*
- * Copyright (C) Harald Geyer <harald@ccbib.org>
- * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
- *
- * SPDX-License-Identifier: (GPL-2.0 OR MIT)
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
/dts-v1/;
#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
@@ -21,6 +19,15 @@
serial0 = &uart0;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 0>;
+ power-supply = <&reg_dcdc1>;
+ brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
+ default-brightness-level = <5>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ };
+
chosen {
stdout-path = "serial0:115200n8";
@@ -70,6 +77,45 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+ sound-name-prefix = "Speaker Amp";
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+ cpu-supply = <&reg_dcdc2>;
};
&ehci1 {
@@ -77,14 +123,31 @@
};
-/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline)
- * driver for this chip at the moment, the bootloader initializes it.
- * However it can be accessed with the i2c-dev driver from user space.
- */
&i2c0 {
clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ dvdd25-supply = <&reg_dldo2>;
+ dvdd12-supply = <&reg_dldo3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ anx6345_in: endpoint {
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+ };
+ };
+};
+
+&mixer0 {
status = "okay";
};
@@ -131,6 +194,10 @@
status = "okay";
};
+&pwm {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
@@ -145,6 +212,14 @@
#include "axp803.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_aldo1 {
regulator-always-on;
regulator-min-microvolt = <2800000>;
@@ -239,7 +314,7 @@
};
/*
- * The A64 chip cannot work without this regulator off, although
+ * The A64 chip cannot work with this regulator off, although
* it seems to be only driving the AR100 core.
* Maybe we don't still know well about CPUs domain.
*/
@@ -258,6 +333,43 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Headphone", "Headphone Jack",
+ "Microphone", "Headset Microphone",
+ "Microphone", "Internal Microphone",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Headphone Jack", "HP",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Internal Microphone", "MBIAS",
+ "MIC1", "Internal Microphone",
+ "Headset Microphone", "HBIAS",
+ "MIC2", "Headset Microphone";
+ status = "okay";
+};
+
+&tcon0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rgb666_pins>;
+
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_anx6345: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&anx6345_in>;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index ff41abc96a..31143fe64d 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -1,46 +1,7 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * based on the Allwinner H3 dtsi:
- * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
#include <dt-bindings/clock/sun50i-a64-ccu.h>
#include <dt-bindings/clock/sun8i-de2.h>
@@ -49,6 +10,7 @@
#include <dt-bindings/reset/sun50i-a64-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -84,35 +46,47 @@
#size-cells = <0>;
cpu0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
next-level-cache = <&L2>;
+ clocks = <&ccu 21>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
};
L2: l2-cache {
@@ -139,15 +113,16 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ clock-output-names = "ext-osc32k";
};
- iosc: internal-osc-clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <16000000>;
- clock-accuracy = <300000000>;
- clock-output-names = "iosc";
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
@@ -155,6 +130,30 @@
method = "smc";
};
+ sound: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-a64-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <128>;
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC";
+ status = "disabled";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&dai>;
+ };
+
+ link_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
sound_spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
@@ -175,6 +174,7 @@
timer {
compatible = "arm,armv8-timer";
+ allwinner,erratum-unknown1;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
@@ -185,13 +185,76 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal-zones {
+ cpu_thermal: cpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 0>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: cpu_alert1 {
+ /* milliCelsius */
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu0_thermal: gpu0-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 1>;
+ };
+
+ gpu1_thermal: gpu1-thermal {
+ /* milliseconds */
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&ths 2>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- de2@1000000 {
+ bus@1000000 {
compatible = "allwinner,sun50i-a64-de2";
reg = <0x1000000 0x400000>;
allwinner,sram = <&de2_sram 1>;
@@ -201,16 +264,28 @@
display_clocks: clock@0 {
compatible = "allwinner,sun50i-a64-de2-clk";
- reg = <0x0 0x100000>;
- clocks = <&ccu CLK_DE>,
- <&ccu CLK_BUS_DE>;
- clock-names = "mod",
- "bus";
+ reg = <0x0 0x10000>;
+ clocks = <&ccu CLK_BUS_DE>,
+ <&ccu CLK_DE>;
+ clock-names = "bus",
+ "mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
+ rotate: rotate@20000 {
+ compatible = "allwinner,sun50i-a64-de2-rotate",
+ "allwinner,sun8i-a83t-de2-rotate";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&display_clocks CLK_BUS_ROT>,
+ <&display_clocks CLK_ROT>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_ROT>;
+ };
+
mixer0: mixer@100000 {
compatible = "allwinner,sun50i-a64-de2-mixer-0";
reg = <0x100000 0x100000>;
@@ -225,11 +300,19 @@
#size-cells = <0>;
mixer0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- mixer0_out_tcon0: endpoint {
+ mixer0_out_tcon0: endpoint@0 {
+ reg = <0>;
remote-endpoint = <&tcon0_in_mixer0>;
};
+
+ mixer0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_mixer0>;
+ };
};
};
};
@@ -248,9 +331,17 @@
#size-cells = <0>;
mixer1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
- mixer1_out_tcon1: endpoint {
+ mixer1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_mixer1>;
+ };
+
+ mixer1_out_tcon1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&tcon1_in_mixer1>;
};
};
@@ -259,8 +350,7 @@
};
syscon: syscon@1c00000 {
- compatible = "allwinner,sun50i-a64-system-control",
- "syscon";
+ compatible = "allwinner,sun50i-a64-system-control";
reg = <0x01c00000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -278,6 +368,20 @@
reg = <0x0000 0x28000>;
};
};
+
+ sram_c1: sram@1d00000 {
+ compatible = "mmio-sram";
+ reg = <0x01d00000 0x40000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x01d00000 0x40000>;
+
+ ve_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-a64-sram-c1",
+ "allwinner,sun4i-a10-sram-c1";
+ reg = <0x000000 0x40000>;
+ };
+ };
};
dma: dma-controller@1c02000 {
@@ -299,6 +403,7 @@
clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
@@ -315,12 +420,23 @@
reg = <0>;
remote-endpoint = <&mixer0_out_tcon0>;
};
+
+ tcon0_in_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon0>;
+ };
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ tcon0_out_dsi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
};
};
};
@@ -340,9 +456,17 @@
#size-cells = <0>;
tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
- tcon1_in_mixer1: endpoint {
+ tcon1_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon1>;
+ };
+
+ tcon1_in_mixer1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&mixer1_out_tcon1>;
};
};
@@ -360,6 +484,17 @@
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun50i-a64-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
@@ -405,6 +540,21 @@
sid: eeprom@1c14000 {
compatible = "allwinner,sun50i-a64-sid";
reg = <0x1c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ths_calibration: thermal-sensor-calibration@34 {
+ reg = <0x34 0x8>;
+ };
+ };
+
+ crypto: crypto@1c15000 {
+ compatible = "allwinner,sun50i-a64-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_CE>;
};
usb_otg: usb@1c19000 {
@@ -417,6 +567,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
+ dr_mode = "otg";
status = "disabled";
};
@@ -491,7 +642,7 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -503,22 +654,50 @@
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu 58>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+ clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
- i2c0_pins: i2c0_pins {
+ csi_pins: csi-pins {
+ pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+ "PE7", "PE8", "PE9", "PE10", "PE11";
+ function = "csi";
+ };
+
+ /omit-if-no-ref/
+ csi_mclk_pin: csi-mclk-pin {
+ pins = "PE1";
+ function = "csi";
+ };
+
+ i2c0_pins: i2c0-pins {
pins = "PH0", "PH1";
function = "i2c0";
};
- i2c1_pins: i2c1_pins {
+ i2c1_pins: i2c1-pins {
pins = "PH2", "PH3";
function = "i2c1";
};
+ i2c2_pins: i2c2-pins {
+ pins = "PE14", "PE15";
+ function = "i2c2";
+ };
+
+ /omit-if-no-ref/
+ lcd_rgb666_pins: lcd-rgb666-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD6", "PD7", "PD8", "PD9",
+ "PD10", "PD11", "PD12", "PD13",
+ "PD14", "PD15", "PD16", "PD17",
+ "PD18", "PD19", "PD20", "PD21";
+ function = "lcd0";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -551,19 +730,19 @@
bias-pull-up;
};
- pwm_pin: pwm_pin {
+ pwm_pin: pwm-pin {
pins = "PD22";
function = "pwm";
};
- rmii_pins: rmii_pins {
+ rmii_pins: rmii-pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
function = "emac";
drive-strength = <40>;
};
- rgmii_pins: rgmii_pins {
+ rgmii_pins: rgmii-pins {
pins = "PD8", "PD9", "PD10", "PD11", "PD12",
"PD13", "PD15", "PD16", "PD17", "PD18",
"PD19", "PD20", "PD21", "PD22", "PD23";
@@ -571,17 +750,17 @@
drive-strength = <40>;
};
- spdif_tx_pin: spdif {
+ spdif_tx_pin: spdif-tx-pin {
pins = "PH8";
function = "spdif";
};
- spi0_pins: spi0 {
+ spi0_pins: spi0-pins {
pins = "PC0", "PC1", "PC2", "PC3";
function = "spi0";
};
- spi1_pins: spi1 {
+ spi1_pins: spi1-pins {
pins = "PD0", "PD1", "PD2", "PD3";
function = "spi1";
};
@@ -591,12 +770,12 @@
function = "uart0";
};
- uart1_pins: uart1_pins {
+ uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
- uart1_rts_cts_pins: uart1_rts_cts_pins {
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
};
@@ -638,6 +817,14 @@
status = "disabled";
};
+ lradc: lradc@1c21800 {
+ compatible = "allwinner,sun50i-a64-lradc",
+ "allwinner,sun8i-a83t-r-lradc";
+ reg = <0x01c21800 0x400>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-i2s",
@@ -666,6 +853,41 @@
status = "disabled";
};
+ dai: dai@1c22c00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-a64-codec-i2s";
+ reg = <0x01c22c00 0x200>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "apb", "mod";
+ resets = <&ccu RST_BUS_CODEC>;
+ dmas = <&dma 15>, <&dma 15>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ codec: codec@1c22e00 {
+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun8i-a33-codec";
+ reg = <0x01c22e00 0x600>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+ clock-names = "bus", "mod";
+ status = "disabled";
+ };
+
+ ths: thermal-sensor@1c25000 {
+ compatible = "allwinner,sun50i-a64-ths";
+ reg = <0x01c25000 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "mod";
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_BUS_THS>;
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+ #thermal-sensor-cells = <1>;
+ };
+
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
@@ -727,6 +949,8 @@
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -738,6 +962,8 @@
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -749,12 +975,13 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
-
spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
@@ -808,6 +1035,28 @@
};
};
+ mali: gpu@1c40000 {
+ compatible = "allwinner,sun50i-a64-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+ };
+
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
@@ -830,6 +1079,73 @@
status = "disabled";
};
+ mbus: dram-controller@1c62000 {
+ compatible = "allwinner,sun50i-a64-mbus";
+ reg = <0x01c62000 0x1000>;
+ clocks = <&ccu 112>;
+ dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+ #interconnect-cells = <1>;
+ };
+
+ csi: csi@1cb0000 {
+ compatible = "allwinner,sun50i-a64-csi";
+ reg = <0x01cb0000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&csi_pins>;
+ status = "disabled";
+ };
+
+ dsi: dsi@1ca0000 {
+ compatible = "allwinner,sun50i-a64-mipi-dsi";
+ reg = <0x01ca0000 0x1000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>;
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ phys = <&dphy>;
+ phy-names = "dphy";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ dsi_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_dsi>;
+ };
+ };
+ };
+
+ dphy: d-phy@1ca1000 {
+ compatible = "allwinner,sun50i-a64-mipi-dphy",
+ "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
+ clocks = <&ccu CLK_BUS_MIPI_DSI>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_MIPI_DSI>;
+ status = "disabled";
+ #phy-cells = <0>;
+ };
+
+ deinterlace: deinterlace@1e00000 {
+ compatible = "allwinner,sun50i-a64-deinterlace",
+ "allwinner,sun8i-h3-deinterlace";
+ reg = <0x01e00000 0x20000>;
+ clocks = <&ccu CLK_BUS_DEINTERLACE>,
+ <&ccu CLK_DEINTERLACE>,
+ <&ccu CLK_DRAM_DEINTERLACE>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_DEINTERLACE>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&mbus 9>;
+ interconnect-names = "dma-mem";
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun50i-a64-dw-hdmi",
"allwinner,sun8i-a83t-dw-hdmi";
@@ -842,7 +1158,7 @@
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
- phy-names = "hdmi-phy";
+ phy-names = "phy";
status = "disabled";
ports {
@@ -867,7 +1183,7 @@
compatible = "allwinner,sun50i-a64-hdmi-phy";
reg = <0x01ef0000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
- <&ccu 7>;
+ <&ccu CLK_PLL_VIDEO0>;
clock-names = "bus", "mod", "pll-0";
resets = <&ccu RST_BUS_HDMI0>;
reset-names = "phy";
@@ -875,11 +1191,12 @@
};
rtc: rtc@1f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
+ compatible = "allwinner,sun50i-a64-rtc",
+ "allwinner,sun8i-h3-rtc";
+ reg = <0x01f00000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
+ clock-output-names = "osc32k", "osc32k-out", "iosc";
clocks = <&osc32k>;
#clock-cells = <1>;
};
@@ -896,13 +1213,19 @@
r_ccu: clock@1f01400 {
compatible = "allwinner,sun50i-a64-r-ccu";
reg = <0x01f01400 0x100>;
- clocks = <&osc24M>, <&osc32k>, <&iosc>,
- <&ccu 11>;
+ clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+ <&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
+ codec_analog: codec-analog@1f015c0 {
+ compatible = "allwinner,sun50i-a64-codec-analog";
+ reg = <0x01f015c0 0x4>;
+ status = "disabled";
+ };
+
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun50i-a64-i2c",
"allwinner,sun6i-a31-i2c";
@@ -915,6 +1238,19 @@
#size-cells = <0>;
};
+ r_ir: ir@1f02000 {
+ compatible = "allwinner,sun50i-a64-ir",
+ "allwinner,sun6i-a31-ir";
+ reg = <0x01f02000 0x400>;
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_ir_rx_pin>;
+ status = "disabled";
+ };
+
r_pwm: pwm@1f03800 {
compatible = "allwinner,sun50i-a64-pwm",
"allwinner,sun5i-a13-pwm";
@@ -942,12 +1278,17 @@
function = "s_i2c";
};
- r_pwm_pin: pwm {
+ r_ir_rx_pin: r-ir-rx-pin {
+ pins = "PL11";
+ function = "s_cir_rx";
+ };
+
+ r_pwm_pin: r-pwm-pin {
pins = "PL10";
function = "s_pwm";
};
- r_rsb_pins: rsb {
+ r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
};
@@ -972,6 +1313,7 @@
"allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc24M>;
};
};
};
diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
index d66432c6e6..318eb15c41 100644
--- a/include/dt-bindings/clock/sun50i-a64-ccu.h
+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -43,8 +43,10 @@
#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
#define _DT_BINDINGS_CLK_SUN50I_A64_H_
+#define CLK_PLL_VIDEO0 7
#define CLK_PLL_PERIPH0 11
+#define CLK_CPUX 21
#define CLK_BUS_MIPI_DSI 28
#define CLK_BUS_CE 29
#define CLK_BUS_DMA 30
@@ -129,7 +131,7 @@
#define CLK_AVS 109
#define CLK_HDMI 110
#define CLK_HDMI_DDC 111
-
+#define CLK_MBUS 112
#define CLK_DSI_DPHY 113
#define CLK_GPU 114
diff --git a/include/dt-bindings/clock/sun8i-de2.h b/include/dt-bindings/clock/sun8i-de2.h
index 3bed63b524..7768f73b05 100644
--- a/include/dt-bindings/clock/sun8i-de2.h
+++ b/include/dt-bindings/clock/sun8i-de2.h
@@ -15,4 +15,7 @@
#define CLK_MIXER1 7
#define CLK_WB 8
+#define CLK_BUS_ROT 9
+#define CLK_ROT 10
+
#endif /* _DT_BINDINGS_CLOCK_SUN8I_DE2_H_ */
diff --git a/include/dt-bindings/reset/sun8i-de2.h b/include/dt-bindings/reset/sun8i-de2.h
index 9526017432..1c36a6ac86 100644
--- a/include/dt-bindings/reset/sun8i-de2.h
+++ b/include/dt-bindings/reset/sun8i-de2.h
@@ -10,5 +10,6 @@
#define RST_MIXER0 0
#define RST_MIXER1 1
#define RST_WB 2
+#define RST_ROT 3
#endif /* _DT_BINDINGS_RESET_SUN8I_DE2_H_ */
--
2.25.4
From 7c56200f8043d039b1204e709593495640128edb Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 17 May 2020 20:56:48 -0500
Subject: [PATCH 08/17] sunxi: board: Use a more descriptive variable name
The variable "cmp_str" always leaves me wondering if it is the DT name
of the current board (yes) or DT name in the FIT config entry (no).
In preparation for expanding the functionality here, rename it to
something that obviously means "this is the DT name we are looking for".
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/board.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index f32e8f582f..385d7280a8 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -892,14 +892,14 @@ int ft_board_setup(void *blob, bd_t *bd)
int board_fit_config_name_match(const char *name)
{
struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION);
- const char *cmp_str = (const char *)spl;
+ const char *best_dt_name = (const char *)spl;
/* Check if there is a DT name stored in the SPL header and use that. */
if (spl != INVALID_SPL_HEADER && spl->dt_name_offset) {
- cmp_str += spl->dt_name_offset;
+ best_dt_name += spl->dt_name_offset;
} else {
#ifdef CONFIG_DEFAULT_DEVICE_TREE
- cmp_str = CONFIG_DEFAULT_DEVICE_TREE;
+ best_dt_name = CONFIG_DEFAULT_DEVICE_TREE;
#else
return 0;
#endif
@@ -907,15 +907,15 @@ int board_fit_config_name_match(const char *name)
#ifdef CONFIG_PINE64_DT_SELECTION
/* Differentiate the two Pine64 board DTs by their DRAM size. */
- if (strstr(name, "-pine64") && strstr(cmp_str, "-pine64")) {
+ if (strstr(name, "-pine64") && strstr(best_dt_name, "-pine64")) {
if ((gd->ram_size > 512 * 1024 * 1024))
return !strstr(name, "plus");
else
return !!strstr(name, "plus");
} else {
- return strcmp(name, cmp_str);
+ return strcmp(name, best_dt_name);
}
#endif
- return strcmp(name, cmp_str);
+ return strcmp(name, best_dt_name);
}
#endif
--
2.25.4
From 29991797378cc57430f75319ebd203b8bea401bb Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 17 May 2020 21:10:29 -0500
Subject: [PATCH 09/17] sunxi: board: Add a helper to get the SPL DT name
This moves the validity checking and typecasts all to one place away
from the string comparison logic, and it detangles the compile-time
and runtime control flow.
The new helper will also be used by U-Boot proper in a future commit.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/board.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 385d7280a8..5271c86d00 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -319,6 +319,17 @@ static struct boot_file_head * get_spl_header(uint8_t req_version)
return spl;
}
+static const char *get_spl_dt_name(void)
+{
+ struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION);
+
+ /* Check if there is a DT name stored in the SPL header. */
+ if (spl != INVALID_SPL_HEADER && spl->dt_name_offset)
+ return (char *)spl + spl->dt_name_offset;
+
+ return NULL;
+}
+
int dram_init(void)
{
struct boot_file_head *spl = get_spl_header(SPL_DRAM_HEADER_VERSION);
@@ -891,20 +902,17 @@ int ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
- struct boot_file_head *spl = get_spl_header(SPL_DT_HEADER_VERSION);
- const char *best_dt_name = (const char *)spl;
+ const char *best_dt_name = get_spl_dt_name();
- /* Check if there is a DT name stored in the SPL header and use that. */
- if (spl != INVALID_SPL_HEADER && spl->dt_name_offset) {
- best_dt_name += spl->dt_name_offset;
- } else {
#ifdef CONFIG_DEFAULT_DEVICE_TREE
+ if (best_dt_name == NULL)
best_dt_name = CONFIG_DEFAULT_DEVICE_TREE;
-#else
- return 0;
#endif
- };
+ if (best_dt_name == NULL) {
+ /* No DT name was provided, so accept the first config. */
+ return 0;
+ }
#ifdef CONFIG_PINE64_DT_SELECTION
/* Differentiate the two Pine64 board DTs by their DRAM size. */
if (strstr(name, "-pine64") && strstr(best_dt_name, "-pine64")) {
--
2.25.4
From fb8f12364dec292df7451c71c4e0747ff0bad12b Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 17 May 2020 21:18:17 -0500
Subject: [PATCH 10/17] sunxi: board: Simplify Pine A64 DT selection logic
Instead of using an entirely separate matching algorithm, simply update
the name of the DT we want to match. Enabling this logic does not depend
on the FIT config name, only on the initial guess of the board name.
Importantly, the initial guess must be "sun50i-a64-pine64-plus", because
otherwise the logic would trigger when "sun50i-a64-pine64-lts" was
written to the SPL header.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/board.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 5271c86d00..2b20153303 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -914,14 +914,10 @@ int board_fit_config_name_match(const char *name)
return 0;
}
#ifdef CONFIG_PINE64_DT_SELECTION
-/* Differentiate the two Pine64 board DTs by their DRAM size. */
- if (strstr(name, "-pine64") && strstr(best_dt_name, "-pine64")) {
- if ((gd->ram_size > 512 * 1024 * 1024))
- return !strstr(name, "plus");
- else
- return !!strstr(name, "plus");
- } else {
- return strcmp(name, best_dt_name);
+ else if (strstr(best_dt_name, "-pine64-plus")) {
+ /* Differentiate the Pine A64 boards by their DRAM size. */
+ if ((gd->ram_size == 512 * 1024 * 1024))
+ best_dt_name = "sun50i-a64-pine64";
}
#endif
return strcmp(name, best_dt_name);
--
2.25.4
From dcb373558e12c022defb0a19b1932fc821e1b061 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 17 May 2020 21:29:27 -0500
Subject: [PATCH 11/17] sunxi: board: Add PinePhone DT selection logic
There are two different publicly-released revisions of the PinePhone
hardware, versions 1.1 and 1.2; and they need different device trees.
Since some GPIO pins were rerouted, we can use that to distinguish
between them.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
board/sunxi/board.c | 21 +++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index be0822bfb7..8421f3b685 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1010,4 +1010,11 @@ config PINE64_DT_SELECTION
option, the device tree selection code specific to Pine64 which
utilizes the DRAM size will be enabled.
+config PINEPHONE_DT_SELECTION
+ bool "Enable PinePhone device tree selection code"
+ depends on MACH_SUN50I
+ help
+ Enable this option to automatically select the device tree for the
+ correct PinePhone hardware revision during boot.
+
endif
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 2b20153303..5e7983f848 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -27,6 +27,7 @@
#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/prcm.h>
#include <asm/arch/spl.h>
#include <linux/delay.h>
#include <u-boot/crc.h>
@@ -920,6 +921,26 @@ int board_fit_config_name_match(const char *name)
best_dt_name = "sun50i-a64-pine64";
}
#endif
+#ifdef CONFIG_PINEPHONE_DT_SELECTION
+ else if (strstr(best_dt_name, "-pinephone")) {
+ /* Differentiate the PinePhone revisions by GPIO inputs. */
+ prcm_apb0_enable(PRCM_APB0_GATE_PIO);
+ sunxi_gpio_set_pull(SUNXI_GPL(6), SUNXI_GPIO_PULL_UP);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(6), SUNXI_GPIO_INPUT);
+ udelay(100);
+
+ /* PL6 is pulled low by the modem on v1.2. */
+ if (gpio_get_value(SUNXI_GPL(6)) == 0)
+ best_dt_name = "sun50i-a64-pinephone-1.2";
+ else
+ best_dt_name = "sun50i-a64-pinephone-1.1";
+
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(6), SUNXI_GPIO_DISABLE);
+ sunxi_gpio_set_pull(SUNXI_GPL(6), SUNXI_GPIO_PULL_DISABLE);
+ prcm_apb0_disable(PRCM_APB0_GATE_PIO);
+ }
+#endif
+
return strcmp(name, best_dt_name);
}
#endif
--
2.25.4
From c68536f42fa916ae7f96715a553f8d1931712607 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 17 May 2020 21:40:51 -0500
Subject: [PATCH 12/17] sunxi: board: Save the chosen DT name in the SPL header
This overwrites the name loaded from the SPL image. It will be different
if there was previously no name provided, or if a more accurate name was
determined by the board variant selection logic. This means that the DT
name in the SPL header now always matches the DT appended to U-Boot.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/board.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 5e7983f848..b57082c02f 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -331,6 +331,21 @@ static const char *get_spl_dt_name(void)
return NULL;
}
+static void set_spl_dt_name(const char *name)
+{
+ struct boot_file_head *spl = get_spl_header(SPL_ENV_HEADER_VERSION);
+
+ if (spl == INVALID_SPL_HEADER)
+ return;
+
+ /* Promote the header version for U-Boot proper, if needed. */
+ if (spl->spl_signature[3] < SPL_DT_HEADER_VERSION)
+ spl->spl_signature[3] = SPL_DT_HEADER_VERSION;
+
+ strcpy((char *)&spl->string_pool, name);
+ spl->dt_name_offset = offsetof(struct boot_file_head, string_pool);
+}
+
int dram_init(void)
{
struct boot_file_head *spl = get_spl_header(SPL_DRAM_HEADER_VERSION);
@@ -904,6 +919,7 @@ int ft_board_setup(void *blob, bd_t *bd)
int board_fit_config_name_match(const char *name)
{
const char *best_dt_name = get_spl_dt_name();
+ int ret;
#ifdef CONFIG_DEFAULT_DEVICE_TREE
if (best_dt_name == NULL)
@@ -941,6 +957,15 @@ int board_fit_config_name_match(const char *name)
}
#endif
- return strcmp(name, best_dt_name);
+ ret = strcmp(name, best_dt_name);
+
+ /*
+ * If one of the FIT configurations matches the most accurate DT name,
+ * update the SPL header to provide that DT name to U-Boot proper.
+ */
+ if (ret == 0)
+ set_spl_dt_name(best_dt_name);
+
+ return ret;
}
#endif
--
2.25.4
From f331c332f89e75b2093898e9294619088bd5e732 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 17 May 2020 21:47:09 -0500
Subject: [PATCH 13/17] sunxi: board: Set fdtfile to match the DT chosen by SPL
Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE.
This meant that, regardless of the DT chosen by SPL (either by changing
the header in the image or by the selection code at runtime), Linux
always used the default DT.
By using the name from the SPL header (which, because of the previous
commit, always matches the DT used by U-Boot proper), Linux also sees
the same board as U-Boot/SPL, even if the boot script later loads a DT
from disk.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
board/sunxi/board.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b57082c02f..6a59507030 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -870,6 +870,7 @@ static void setup_environment(const void *fdt)
int misc_init_r(void)
{
+ const char *spl_dt_name;
uint boot;
env_set("fel_booted", NULL);
@@ -888,6 +889,16 @@ int misc_init_r(void)
env_set("mmc_bootdev", "1");
}
+ /* Set fdtfile to match the FIT configuration chosen in SPL. */
+ spl_dt_name = get_spl_dt_name();
+ if (spl_dt_name) {
+ char *prefix = IS_ENABLED(CONFIG_ARM64) ? "allwinner/" : "";
+ char str[64];
+
+ snprintf(str, sizeof(str), "%s%s.dtb", prefix, spl_dt_name);
+ env_set("fdtfile", str);
+ }
+
setup_environment(gd->fdt_blob);
#ifdef CONFIG_USB_ETHER
--
2.25.4
From c26789f2a6d15490e66277f26d6c6c1e6026aae2 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sun, 15 Dec 2019 13:34:43 -0600
Subject: [PATCH 14/17] sun50i: a64: Add PinePhone DTS and defconfig
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/sun50i-a64-pinephone-1.0.dts | 25 ++
arch/arm/dts/sun50i-a64-pinephone-1.1.dts | 44 ++++
arch/arm/dts/sun50i-a64-pinephone-1.2.dts | 70 ++++++
arch/arm/dts/sun50i-a64-pinephone.dtsi | 266 +++++++++++++++++++++-
configs/pinephone_defconfig | 15 ++
6 files changed, 409 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-pinephone-1.2.dts
create mode 100644 configs/pinephone_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 38a31589ba..8161997740 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -595,6 +595,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-pinebook.dtb \
sun50i-a64-pinephone-1.0.dtb \
sun50i-a64-pinephone-1.1.dtb \
+ sun50i-a64-pinephone-1.2.dtb \
sun50i-a64-pinetab.dtb \
sun50i-a64-sopine-baseboard.dtb \
sun50i-a64-teres-i.dtb
diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
index 0c42272106..5ac8d19d4c 100644
--- a/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
+++ b/arch/arm/dts/sun50i-a64-pinephone-1.0.dts
@@ -9,3 +9,28 @@
model = "Pine64 PinePhone Developer Batch (1.0)";
compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
};
+
+/*
+ * The N_VBUSEN pin is disconnected, but we need to inform the PMIC about
+ * the VBUS status anyway. To avoid the pin from floating and to inform
+ * the PMIC, about VBUS status, we couple reg_drivevbus with reg_vbus.
+ */
+&reg_drivevbus {
+ vin-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
+
+&reg_usb0_vbus {
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ enable-active-high;
+ vin-supply = <&reg_drivevbus>;
+};
+
+&ring_indicator {
+ gpios = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 */
+};
+
+&sgm3140 {
+ flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
index 06a775c416..7ebac3ab9b 100644
--- a/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm/dts/sun50i-a64-pinephone-1.1.dts
@@ -9,3 +9,47 @@
model = "Pine64 PinePhone Braveheart (1.1)";
compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
};
+
+&backlight {
+ power-supply = <&reg_ldo_io0>;
+ /*
+ * PWM backlight circuit on this PinePhone revision was changed since
+ * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+ * being off is around 20%. Duty cycle for the lowest brightness level
+ * also varries quite a bit between individual boards, so the lowest
+ * value here was chosen as a safe default.
+ */
+ brightness-levels = <
+ 774 793 814 842
+ 882 935 1003 1088
+ 1192 1316 1462 1633
+ 1830 2054 2309 2596
+ 2916 3271 3664 4096>;
+ num-interpolated-steps = <50>;
+ default-brightness-level = <400>;
+};
+
+/*
+ * The N_VBUSEN pin is disconnected, but we need to inform the PMIC about
+ * the VBUS status anyway. To avoid the pin from floating and to inform
+ * the PMIC, about VBUS status, we couple reg_drivevbus with reg_vbus.
+ */
+&reg_drivevbus {
+ vin-supply = <&reg_vcc5v0>;
+ status = "okay";
+};
+
+&reg_usb0_vbus {
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+ enable-active-high;
+ vin-supply = <&reg_drivevbus>;
+};
+
+&ring_indicator {
+ gpios = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 */
+};
+
+&sgm3140 {
+ flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+ enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+};
diff --git a/arch/arm/dts/sun50i-a64-pinephone-1.2.dts b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts
new file mode 100644
index 0000000000..cb5184df1b
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pinephone-1.2.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Samuel Holland <samuel@sholland.org>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+ model = "Pine64 PinePhone (1.2)";
+ compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+};
+
+&backlight {
+ power-supply = <&reg_ldo_io0>;
+ /*
+ * PWM backlight circuit on this PinePhone revision was changed since
+ * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+ * being off is around 20%. Duty cycle for the lowest brightness level
+ * also varries quite a bit between individual boards, so the lowest
+ * value here was chosen as a safe default.
+ */
+ brightness-levels = <
+ 774 793 814 842
+ 882 935 1003 1088
+ 1192 1316 1462 1633
+ 1830 2054 2309 2596
+ 2916 3271 3664 4096>;
+ num-interpolated-steps = <50>;
+ default-brightness-level = <400>;
+};
+
+&lis3mdl {
+ interrupt-parent = <&pio>;
+ interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
+};
+
+&mmc1 {
+ mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&reg_anx_vdd1v0 {
+ gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+ enable-active-high;
+};
+
+&reg_usb0_vbus {
+ /*
+ * ANX7688 will enable/disable USB-5V <-> DCIN switch by itself
+ * via VBUS_CTRL pin, so no GPIO is needed here.
+ */
+ vin-supply = <&reg_vcc5v0>;
+};
+
+&ring_indicator {
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+};
+
+&sgm3140 {
+ flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+ enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+};
+
+&usbphy {
+ usb0_vbus_det-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+};
diff --git a/arch/arm/dts/sun50i-a64-pinephone.dtsi b/arch/arm/dts/sun50i-a64-pinephone.dtsi
index cefda145c3..fc2dca4101 100644
--- a/arch/arm/dts/sun50i-a64-pinephone.dtsi
+++ b/arch/arm/dts/sun50i-a64-pinephone.dtsi
@@ -7,6 +7,7 @@
#include "sun50i-a64-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pwm/pwm.h>
@@ -14,12 +15,41 @@
/ {
aliases {
serial0 = &uart0;
+ ethernet0 = &rtl8723cs;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+ enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+ /* Backlight configuration differs per PinePhone revision. */
};
chosen {
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ ring_indicator: ring-indicator {
+ label = "Ring Indicator";
+ linux,can-disable;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-event-action = <EV_ACT_ASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ i2c_csi: i2c-csi {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* PE13 */
+ scl-gpios = <&pio 4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* PE12 */
+ i2c-gpio,delay-us = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
leds {
compatible = "gpio-leds";
@@ -27,18 +57,79 @@
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ retain-state-suspended;
};
green {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+ retain-state-suspended;
};
red {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+ retain-state-suspended;
+ };
+ };
+
+ reg_anx_vdd1v0: anx-vdd1v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "anx-vdd1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_vbat_bb: vbat-bb {
+ compatible = "regulator-fixed";
+ regulator-always-on;
+ regulator-name = "vbat-bb";
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+ gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ enable-active-high;
+ };
+
+ reg_vbat_wifi: vbat-wifi {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vbat-wifi";
+ };
+
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 3 8 GPIO_ACTIVE_HIGH>; /* PD8 */
+ enable-active-high;
+ };
+
+ reg_vconn5v0: vconn5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vconn5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+ enable-active-high;
+ };
+
+ sgm3140: led-controller {
+ compatible = "sgmicro,sgm3140";
+
+ sgm3140_flash: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
};
};
@@ -80,10 +171,54 @@
cpu-supply = <&reg_dcdc2>;
};
+&csi {
+ pinctrl-0 = <&csi_pins>, <&csi_mclk_pin>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi_ov5640_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+};
+
&dai {
status = "okay";
};
+&de {
+ status = "okay";
+};
+
+&dphy {
+ status = "okay";
+};
+
+&dsi {
+ vcc-dsi-supply = <&reg_dldo1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "xingbangda,xbd599", "sitronix,st7703";
+ reg = <0>;
+ reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+ iovcc-supply = <&reg_dldo2>;
+ vcc-supply = <&reg_ldo_io0>;
+ backlight = <&backlight>;
+ };
+};
+
&ehci0 {
status = "okay";
};
@@ -92,17 +227,44 @@
status = "okay";
};
+&i2c0 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt917s", "goodix,gt911";
+ reg = <0x5d>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ AVDD28-supply = <&reg_ldo_io0>;
+ VDDIO-supply = <&reg_ldo_io0>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1440>;
+ };
+};
+
&i2c1 {
status = "okay";
/* Magnetometer */
- lis3mdl@1e {
+ lis3mdl: lis3mdl@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
vdd-supply = <&reg_dldo1>;
vddio-supply = <&reg_dldo1>;
};
+ /* Light/proximity sensor */
+ stk3311@48 {
+ compatible = "sensortek,stk3311";
+ reg = <0x48>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
+ vdd-supply = <&reg_ldo_io0>;
+ leda-supply = <&reg_dldo1>;
+ };
+
/* Accelerometer/gyroscope */
mpu6050@68 {
compatible = "invensense,mpu6050";
@@ -111,6 +273,9 @@
interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
vdd-supply = <&reg_dldo1>;
vddio-supply = <&reg_dldo1>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
};
};
@@ -119,6 +284,47 @@
status = "okay";
};
+&i2c_csi {
+ gc2145: front-camera@3c {
+ compatible = "galaxycore,gc2145";
+ reg = <0x3c>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_dldo3>;
+ DVDD-supply = <&reg_aldo1>;
+ IOVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 4 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PE16 */
+ enable-gpios = <&pio 4 17 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PE17 */
+ };
+
+ ov5640: rear-camera@4c {
+ compatible = "ovti,ov5640";
+ reg = <0x4c>;
+ clocks = <&ccu CLK_CSI_MCLK>;
+ clock-names = "xclk";
+
+ AVDD-supply = <&reg_dldo3>;
+ DOVDD-supply = <&reg_aldo1>; /* shared with AFVCC */
+ DVDD-supply = <&reg_eldo3>;
+ reset-gpios = <&pio 3 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PD3 */
+ powerdown-gpios = <&pio 2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* PC0 */
+
+ flash-leds = <&sgm3140_flash>;
+
+ port {
+ ov5640_ep: endpoint {
+ remote-endpoint = <&csi_ov5640_ep>;
+ bus-width = <8>;
+ hsync-active = <1>; /* Active high */
+ vsync-active = <0>; /* Active low */
+ data-active = <1>; /* Active high */
+ pclk-sample = <1>; /* Rising */
+ };
+ };
+ };
+};
+
&lradc {
vref-supply = <&reg_aldo3>;
status = "okay";
@@ -138,6 +344,10 @@
};
};
+&mixer1 {
+ status = "okay";
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -149,6 +359,20 @@
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_vbat_wifi>;
+ vqmmc-supply = <&reg_dldo4>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723cs: wifi@1 {
+ reg = <1>;
+ };
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
@@ -188,6 +412,10 @@
*/
};
+&r_pwm {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
@@ -201,8 +429,8 @@
#include "axp803.dtsi"
-&ac_power_supply {
- status = "okay";
+&axp_adc {
+ x-powers,ts-as-gpadc;
};
&battery_power_supply {
@@ -224,8 +452,8 @@
&reg_aldo3 {
regulator-always-on;
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
@@ -268,7 +496,7 @@
&reg_dldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "vcc-mipi-io";
+ regulator-name = "vcc-dsi-io";
};
&reg_dldo3 {
@@ -293,7 +521,7 @@
&reg_eldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "dvdd-1v8-csi";
+ regulator-name = "dvdd-csi";
};
&reg_fldo1 {
@@ -342,10 +570,10 @@
"Internal Speaker", "Speaker Amp OUTR",
"Speaker Amp INL", "LINEOUT",
"Speaker Amp INR", "LINEOUT",
- "Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right",
- "AIF1 Slot 0 Left ADC", "Left ADC",
- "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left DAC", "DAC Left",
+ "Right DAC", "DAC Right",
+ "ADC Left", "Left ADC",
+ "ADC Right", "Right ADC",
"Internal Microphone", "MBIAS",
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
@@ -358,6 +586,20 @@
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723cs-bt";
+ reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+ device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
+ host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ firmware-postfix = "pinebook";
+ };
+};
+
/* Connected to the modem (hardware flow control can't be used) */
&uart3 {
pinctrl-names = "default";
@@ -366,7 +608,7 @@
};
&usb_otg {
- dr_mode = "peripheral";
+ dr_mode = "otg";
status = "okay";
};
diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
new file mode 100644
index 0000000000..96a87617f3
--- /dev/null
+++ b/configs/pinephone_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I=y
+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=3881949
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# CONFIG_VIDEO_DE2 is not set
+CONFIG_PINEPHONE_DT_SELECTION=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.2"
+CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
+# CONFIG_NET is not set
+# CONFIG_EFI_LOADER is not set
--
2.25.4
From 08156f7f7dfe8de2209d3bb1d90d41519aedb903 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Tue, 11 Feb 2020 14:10:05 +0100
Subject: [PATCH 15/17] pinephone: Add volume_key environment variable
When the user has a volume key pressed volume_key variable will
contain either value 'down' or 'up', otherwise it will be empty.
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
board/sunxi/Makefile | 1 +
board/sunxi/board.c | 18 ++++++++++
board/sunxi/lradc.c | 81 ++++++++++++++++++++++++++++++++++++++++++++
board/sunxi/lradc.h | 11 ++++++
4 files changed, 111 insertions(+)
create mode 100644 board/sunxi/lradc.c
create mode 100644 board/sunxi/lradc.h
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index c4e13f8c38..6a8a2f5b42 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_SUN7I_GMAC) += gmac.o
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o
+obj-$(CONFIG_MACH_SUN50I) += lradc.o
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 6a59507030..83ee2d18d4 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -44,6 +44,7 @@
#include <spl.h>
#include <sy8106a.h>
#include <asm/setup.h>
+#include "lradc.h"
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
/* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
@@ -640,6 +641,12 @@ void sunxi_board_init(void)
{
int power_failed = 0;
+#ifdef CONFIG_MACH_SUN50I
+ // we init the lradc in SPL to get the ADC started early to have
+ // a valid sample when U-Boot main binary gets executed.
+ lradc_enable();
+#endif
+
#ifdef CONFIG_SY8106A_POWER
power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
#endif
@@ -899,6 +906,17 @@ int misc_init_r(void)
env_set("fdtfile", str);
}
+#ifdef CONFIG_MACH_SUN50I
+ int key = lradc_get_pressed_key();
+ if (key == KEY_VOLUMEDOWN)
+ env_set("volume_key", "down");
+ else if (key == KEY_VOLUMEUP)
+ env_set("volume_key", "up");
+
+ // no longer needed
+ lradc_disable();
+#endif
+
setup_environment(gd->fdt_blob);
#ifdef CONFIG_USB_ETHER
diff --git a/board/sunxi/lradc.c b/board/sunxi/lradc.c
new file mode 100644
index 0000000000..693b198e25
--- /dev/null
+++ b/board/sunxi/lradc.c
@@ -0,0 +1,81 @@
+#include <common.h>
+#include <asm/io.h>
+#include "lradc.h"
+
+#define LRADC_BASE 0x1c21800
+
+#define LRADC_CTRL (LRADC_BASE + 0x00)
+#define LRADC_INTC (LRADC_BASE + 0x04)
+#define LRADC_INTS (LRADC_BASE + 0x08)
+#define LRADC_DATA0 (LRADC_BASE + 0x0c)
+#define LRADC_DATA1 (LRADC_BASE + 0x10)
+
+/* LRADC_CTRL bits */
+#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */
+#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */
+#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */
+#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */
+#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */
+#define HOLD_KEY_EN(x) ((x) << 7)
+#define HOLD_EN(x) ((x) << 6)
+#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */
+#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */
+#define ENABLE(x) ((x) << 0)
+
+/* LRADC_INTC and LRADC_INTS bits */
+#define CHAN1_KEYUP_IRQ BIT(12)
+#define CHAN1_ALRDY_HOLD_IRQ BIT(11)
+#define CHAN1_HOLD_IRQ BIT(10)
+#define CHAN1_KEYDOWN_IRQ BIT(9)
+#define CHAN1_DATA_IRQ BIT(8)
+#define CHAN0_KEYUP_IRQ BIT(4)
+#define CHAN0_ALRDY_HOLD_IRQ BIT(3)
+#define CHAN0_HOLD_IRQ BIT(2)
+#define CHAN0_KEYDOWN_IRQ BIT(1)
+#define CHAN0_DATA_IRQ BIT(0)
+
+// this is for PinePhone only
+
+int lradc_get_pressed_key(void)
+{
+ uint32_t val;
+ uint32_t vref = 3000000 * 2 / 3;
+
+ val = readl(LRADC_DATA0) & 0x3f;
+ val = val * vref / 63;
+
+// printf("lradc=%u\n", val);
+
+ if (val < 200000) // 158730
+ return KEY_VOLUMEUP;
+ else if (val < 400000) // 349206
+ return KEY_VOLUMEDOWN;
+
+ return 0;
+}
+
+void lradc_enable(void)
+{
+ // aldo3 is always on and defaults to 3V
+
+ writel(0xffffffff, LRADC_INTS);
+ writel(0, LRADC_INTC);
+
+ /*
+ * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to
+ * stabilize on press, wait (1 + 1) * 4 ms for key release
+ */
+ writel(FIRST_CONVERT_DLY(0) | LEVELA_B_CNT(0) | HOLD_EN(0) |
+ SAMPLE_RATE(0) | ENABLE(1), LRADC_CTRL);
+
+}
+
+void lradc_disable(void)
+{
+ writel(0xffffffff, LRADC_INTS);
+ writel(0, LRADC_INTC);
+
+ /* Disable lradc, leave other settings unchanged */
+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
+ SAMPLE_RATE(2), LRADC_CTRL);
+}
diff --git a/board/sunxi/lradc.h b/board/sunxi/lradc.h
new file mode 100644
index 0000000000..c908401b5b
--- /dev/null
+++ b/board/sunxi/lradc.h
@@ -0,0 +1,11 @@
+#pragma once
+
+enum {
+ KEY_NONE = 0,
+ KEY_VOLUMEDOWN = 1,
+ KEY_VOLUMEUP = 2,
+};
+
+int lradc_get_pressed_key(void);
+void lradc_enable(void);
+void lradc_disable(void);
--
2.25.4
From 62eaa32723812732529bf75fd04fafd5117fbe9d Mon Sep 17 00:00:00 2001
From: Marius Gripsgard <marius@ubports.com>
Date: Mon, 4 May 2020 22:28:42 +0200
Subject: [PATCH 16/17] Set ram clock to 624 and no bootdelay
---
configs/pinephone_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
index 96a87617f3..9dfac8ffd9 100644
--- a/configs/pinephone_defconfig
+++ b/configs/pinephone_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_SUNXI=y
CONFIG_SPL=y
CONFIG_MACH_SUN50I=y
CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
-CONFIG_DRAM_CLK=552
+CONFIG_DRAM_CLK=624
CONFIG_DRAM_ZQ=3881949
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
# CONFIG_VIDEO_DE2 is not set
@@ -13,3 +13,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.2"
CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
# CONFIG_NET is not set
# CONFIG_EFI_LOADER is not set
+CONFIG_BOOTDELAY=0
--
2.25.4
From 3279f327429d55993172a60496b33114db1c1718 Mon Sep 17 00:00:00 2001
From: Marius Gripsgard <marius@ubports.com>
Date: Tue, 5 May 2020 16:51:13 +0200
Subject: [PATCH 17/17] Enable led on boot to notify user of boot status
---
arch/arm/mach-sunxi/Kconfig | 5 +++++
board/sunxi/board.c | 6 ++++++
configs/pinephone_defconfig | 1 +
3 files changed, 12 insertions(+)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 8421f3b685..2bfdf7738b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,10 @@
if ARCH_SUNXI
+config PINEPHONE_LEDS
+ bool "Notify boot status via LEDs on PinePhone"
+ ---help---
+ LED boot notification.
+
config SPL_LDSCRIPT
default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 83ee2d18d4..91a58f6c0e 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -647,6 +647,12 @@ void sunxi_board_init(void)
lradc_enable();
#endif
+#ifdef CONFIG_PINEPHONE_LEDS
+ /* PD18:G PD19:R PD20:B */
+ gpio_request(SUNXI_GPD(19), "led:red");
+ gpio_direction_output(SUNXI_GPD(19), 1);
+#endif
+
#ifdef CONFIG_SY8106A_POWER
power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
#endif
diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
index 9dfac8ffd9..1ffd495d79 100644
--- a/configs/pinephone_defconfig
+++ b/configs/pinephone_defconfig
@@ -14,3 +14,4 @@ CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.2"
# CONFIG_NET is not set
# CONFIG_EFI_LOADER is not set
CONFIG_BOOTDELAY=0
+CONFIG_PINEPHONE_LEDS=y
--
2.25.4
Reference in New Issue View Git Blame Copy Permalink