mirror of
https://github.com/Orange-OpenSource/hurl.git
synced 2024-09-11 05:35:53 +03:00
Update installation with 2.0.1 links.
This commit is contained in:
jcamiel
parent
4f747c946b
commit
176e83e83c
142
README.md
142
README.md
@ -848,50 +848,50 @@ HTTP 200
|
||||
|
||||
will follow a redirection only for the second entry.
|
||||
|
||||
| Option | Description |
|
||||
| --- | --- |
|
||||
| <a href="#cacert" id="cacert"><code>--cacert <FILE></code></a> | Specifies the certificate file for peer verification. The file may contain multiple CA certificates and must be in PEM format.<br>Normally Hurl is built to use a default file for this, so this option is typically used to alter that default file.<br> |
|
||||
| <a href="#cert" id="cert"><code>-E, --cert <CERTIFICATE[:PASSWORD]></code></a> | Client certificate file and password.<br><br>See also [`--key`](#key).<br> |
|
||||
| <a href="#color" id="color"><code>--color</code></a> | Colorize debug output (the HTTP response output is not colorized). <br> |
|
||||
| <a href="#compressed" id="compressed"><code>--compressed</code></a> | Request a compressed response using one of the algorithms br, gzip, deflate and automatically decompress the content.<br> |
|
||||
| <a href="#connect-timeout" id="connect-timeout"><code>--connect-timeout <SECONDS></code></a> | Maximum time in seconds that you allow Hurl's connection to take.<br><br>See also [`-m, --max-time`](#max-time).<br> |
|
||||
| <a href="#connect-to" id="connect-to"><code>--connect-to <HOST1:PORT1:HOST2:PORT2></code></a> | For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. This option can be used several times in a command line.<br><br>See also [`--resolve`](#resolve).<br> |
|
||||
| <a href="#cookie" id="cookie"><code>-b, --cookie <FILE></code></a> | Read cookies from FILE (using the Netscape cookie file format).<br><br>Combined with [`-c, --cookie-jar`](#cookie-jar), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#cookie-jar" id="cookie-jar"><code>-c, --cookie-jar <FILE></code></a> | Write cookies to FILE after running the session (only for one session).<br>The file will be written using the Netscape cookie file format.<br><br>Combined with [`-b, --cookie`](#cookie), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#fail-at-end" id="fail-at-end"><code>--fail-at-end</code></a> | Continue executing requests to the end of the Hurl file even when an assert error occurs.<br>By default, Hurl exits after an assert error in the HTTP response.<br><br>Note that this option does not affect the behavior with multiple input Hurl files.<br><br>All the input files are executed independently. The result of one file does not affect the execution of the other Hurl files.<br> |
|
||||
| <a href="#file-root" id="file-root"><code>--file-root <DIR></code></a> | Set root file system to import files in Hurl. This is used for both files in multipart form data and request body.<br>When this is not explicitly defined, the files are relative to the current directory in which Hurl is running.<br> |
|
||||
| <a href="#location" id="location"><code>-L, --location</code></a> | Follow redirect. To limit the amount of redirects to follow use the [`--max-redirs`](#max-redirs) option<br> |
|
||||
| <a href="#glob" id="glob"><code>--glob <GLOB></code></a> | Specify input files that match the given glob pattern.<br><br>Multiple glob flags may be used. This flag supports common Unix glob patterns like *, ? and []. <br>However, to avoid your shell accidentally expanding glob patterns before Hurl handles them, you must use single quotes or double quotes around each pattern.<br> |
|
||||
| <a href="#include" id="include"><code>-i, --include</code></a> | Include the HTTP headers in the output (last entry).<br> |
|
||||
| <a href="#ignore-asserts" id="ignore-asserts"><code>--ignore-asserts</code></a> | Ignore all asserts defined in the Hurl file.<br> |
|
||||
| <a href="#insecure" id="insecure"><code>-k, --insecure</code></a> | This option explicitly allows Hurl to perform "insecure" SSL connections and transfers.<br> |
|
||||
| <a href="#interactive" id="interactive"><code>--interactive</code></a> | Stop between requests.<br>This is similar to a break point, You can then continue (Press C) or quit (Press Q).<br> |
|
||||
| <a href="#json" id="json"><code>--json</code></a> | Output each hurl file result to JSON. The format is very closed to HAR format. <br> |
|
||||
| <a href="#key" id="key"><code>--key <KEY></code></a> | Private key file name.<br> |
|
||||
| <a href="#max-redirs" id="max-redirs"><code>--max-redirs <NUM></code></a> | Set maximum number of redirection-followings allowed<br>By default, the limit is set to 50 redirections. Set this option to -1 to make it unlimited.<br> |
|
||||
| <a href="#max-time" id="max-time"><code>-m, --max-time <SECONDS></code></a> | Maximum time in seconds that you allow a request/response to take. This is the standard timeout.<br><br>See also [`--connect-timeout`](#connect-timeout).<br> |
|
||||
| <a href="#no-color" id="no-color"><code>--no-color</code></a> | Do not colorize output.<br> |
|
||||
| <a href="#no-output" id="no-output"><code>--no-output</code></a> | Suppress output. By default, Hurl outputs the body of the last response.<br> |
|
||||
| <a href="#noproxy" id="noproxy"><code>--noproxy <HOST(S)></code></a> | Comma-separated list of hosts which do not use a proxy.<br>Override value from Environment variable no_proxy.<br> |
|
||||
| <a href="#output" id="output"><code>-o, --output <FILE></code></a> | Write output to FILE instead of stdout.<br> |
|
||||
| <a href="#proxy" id="proxy"><code>-x, --proxy <[PROTOCOL://]HOST[:PORT]></code></a> | Use the specified proxy.<br> |
|
||||
| <a href="#report-junit" id="report-junit"><code>--report-junit <FILE></code></a> | Generate JUnit File.<br><br>If the FILE report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#report-html" id="report-html"><code>--report-html <DIR></code></a> | Generate HTML report in DIR.<br><br>If the HTML report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#resolve" id="resolve"><code>--resolve <HOST:PORT:ADDR></code></a> | Provide a custom address for a specific host and port pair. Using this, you can make the Hurl requests(s) use a specified address and prevent the otherwise normally resolved address to be used. Consider it a sort of /etc/hosts alternative provided on the command line.<br> |
|
||||
| <a href="#retry" id="retry"><code>--retry</code></a> | Retry requests if any error occurs (asserts, captures, runtimes etc...).<br> |
|
||||
| <a href="#retry-interval" id="retry-interval"><code>--retry-interval <MILLISECONDS></code></a> | Duration in milliseconds between each retry. Default is 1000 ms.<br> |
|
||||
| <a href="#retry-max-count" id="retry-max-count"><code>--retry-max-count <NUM></code></a> | Maximum number of retries. Set this option to -1 to make it unlimited. Default is 10.<br> |
|
||||
| <a href="#ssl-no-revoke" id="ssl-no-revoke"><code>--ssl-no-revoke</code></a> | (Windows) This option tells Hurl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask for exactly that.<br> |
|
||||
| <a href="#test" id="test"><code>--test</code></a> | Activate test mode: with this, the HTTP response is not outputted anymore, progress is reported for each Hurl file tested, and a text summary is displayed when all files have been run.<br> |
|
||||
| <a href="#to-entry" id="to-entry"><code>--to-entry <ENTRY_NUMBER></code></a> | Execute Hurl file to ENTRY_NUMBER (starting at 1).<br>Ignore the remaining of the file. It is useful for debugging a session.<br> |
|
||||
| <a href="#user" id="user"><code>-u, --user <USER:PASSWORD></code></a> | Add basic Authentication header to each request.<br> |
|
||||
| <a href="#user-agent" id="user-agent"><code>-A, --user-agent <NAME></code></a> | Specify the User-Agent string to send to the HTTP server.<br> |
|
||||
| <a href="#variable" id="variable"><code>--variable <NAME=VALUE></code></a> | Define variable (name/value) to be used in Hurl templates.<br> |
|
||||
| <a href="#variables-file" id="variables-file"><code>--variables-file <FILE></code></a> | Set properties file in which your define your variables.<br><br>Each variable is defined as name=value exactly as with [`--variable`](#variable) option.<br><br>Note that defining a variable twice produces an error.<br> |
|
||||
| <a href="#verbose" id="verbose"><code>-v, --verbose</code></a> | Turn on verbose output on standard error stream.<br>Useful for debugging.<br><br>A line starting with '>' means data sent by Hurl.<br>A line staring with '<' means data received by Hurl.<br>A line starting with '*' means additional info provided by Hurl.<br><br>If you only want HTTP headers in the output, [`-i, --include`](#include) might be the option you're looking for.<br> |
|
||||
| <a href="#very-verbose" id="very-verbose"><code>--very-verbose</code></a> | Turn on more verbose output on standard error stream.<br><br>In contrast to [`--verbose`](#verbose) option, this option outputs the full HTTP body request and response on standard error. In addition, lines starting with '**' are libcurl debug logs.<br> |
|
||||
| <a href="#help" id="help"><code>-h, --help</code></a> | Usage help. This lists all current command line options with a short description.<br> |
|
||||
| <a href="#version" id="version"><code>-V, --version</code></a> | Prints version information<br> |
|
||||
| Option | Description |
|
||||
|------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| <a href="#cacert" id="cacert"><code>--cacert <FILE></code></a> | Specifies the certificate file for peer verification. The file may contain multiple CA certificates and must be in PEM format.<br>Normally Hurl is built to use a default file for this, so this option is typically used to alter that default file.<br> |
|
||||
| <a href="#cert" id="cert"><code>-E, --cert <CERTIFICATE[:PASSWORD]></code></a> | Client certificate file and password.<br><br>See also [`--key`](#key).<br> |
|
||||
| <a href="#color" id="color"><code>--color</code></a> | Colorize debug output (the HTTP response output is not colorized). <br> |
|
||||
| <a href="#compressed" id="compressed"><code>--compressed</code></a> | Request a compressed response using one of the algorithms br, gzip, deflate and automatically decompress the content.<br> |
|
||||
| <a href="#connect-timeout" id="connect-timeout"><code>--connect-timeout <SECONDS></code></a> | Maximum time in seconds that you allow Hurl's connection to take.<br><br>See also [`-m, --max-time`](#max-time).<br> |
|
||||
| <a href="#connect-to" id="connect-to"><code>--connect-to <HOST1:PORT1:HOST2:PORT2></code></a> | For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. This option can be used several times in a command line.<br><br>See also [`--resolve`](#resolve).<br> |
|
||||
| <a href="#cookie" id="cookie"><code>-b, --cookie <FILE></code></a> | Read cookies from FILE (using the Netscape cookie file format).<br><br>Combined with [`-c, --cookie-jar`](#cookie-jar), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#cookie-jar" id="cookie-jar"><code>-c, --cookie-jar <FILE></code></a> | Write cookies to FILE after running the session (only for one session).<br>The file will be written using the Netscape cookie file format.<br><br>Combined with [`-b, --cookie`](#cookie), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#fail-at-end" id="fail-at-end"><code>--fail-at-end</code></a> | Continue executing requests to the end of the Hurl file even when an assert error occurs.<br>By default, Hurl exits after an assert error in the HTTP response.<br><br>Note that this option does not affect the behavior with multiple input Hurl files.<br><br>All the input files are executed independently. The result of one file does not affect the execution of the other Hurl files.<br> |
|
||||
| <a href="#file-root" id="file-root"><code>--file-root <DIR></code></a> | Set root file system to import files in Hurl. This is used for both files in multipart form data and request body.<br>When this is not explicitly defined, the files are relative to the current directory in which Hurl is running.<br> |
|
||||
| <a href="#location" id="location"><code>-L, --location</code></a> | Follow redirect. To limit the amount of redirects to follow use the [`--max-redirs`](#max-redirs) option<br> |
|
||||
| <a href="#glob" id="glob"><code>--glob <GLOB></code></a> | Specify input files that match the given glob pattern.<br><br>Multiple glob flags may be used. This flag supports common Unix glob patterns like *, ? and []. <br>However, to avoid your shell accidentally expanding glob patterns before Hurl handles them, you must use single quotes or double quotes around each pattern.<br> |
|
||||
| <a href="#include" id="include"><code>-i, --include</code></a> | Include the HTTP headers in the output (last entry).<br> |
|
||||
| <a href="#ignore-asserts" id="ignore-asserts"><code>--ignore-asserts</code></a> | Ignore all asserts defined in the Hurl file.<br> |
|
||||
| <a href="#insecure" id="insecure"><code>-k, --insecure</code></a> | This option explicitly allows Hurl to perform "insecure" SSL connections and transfers.<br> |
|
||||
| <a href="#interactive" id="interactive"><code>--interactive</code></a> | Stop between requests.<br>This is similar to a break point, You can then continue (Press C) or quit (Press Q).<br> |
|
||||
| <a href="#json" id="json"><code>--json</code></a> | Output each hurl file result to JSON. The format is very closed to HAR format. <br> |
|
||||
| <a href="#key" id="key"><code>--key <KEY></code></a> | Private key file name.<br> |
|
||||
| <a href="#max-redirs" id="max-redirs"><code>--max-redirs <NUM></code></a> | Set maximum number of redirection-followings allowed<br>By default, the limit is set to 50 redirections. Set this option to -1 to make it unlimited.<br> |
|
||||
| <a href="#max-time" id="max-time"><code>-m, --max-time <SECONDS></code></a> | Maximum time in seconds that you allow a request/response to take. This is the standard timeout.<br><br>See also [`--connect-timeout`](#connect-timeout).<br> |
|
||||
| <a href="#no-color" id="no-color"><code>--no-color</code></a> | Do not colorize output.<br> |
|
||||
| <a href="#no-output" id="no-output"><code>--no-output</code></a> | Suppress output. By default, Hurl outputs the body of the last response.<br> |
|
||||
| <a href="#noproxy" id="noproxy"><code>--noproxy <HOST(S)></code></a> | Comma-separated list of hosts which do not use a proxy.<br>Override value from Environment variable no_proxy.<br> |
|
||||
| <a href="#output" id="output"><code>-o, --output <FILE></code></a> | Write output to FILE instead of stdout.<br> |
|
||||
| <a href="#proxy" id="proxy"><code>-x, --proxy <[PROTOCOL://]HOST[:PORT]></code></a> | Use the specified proxy.<br> |
|
||||
| <a href="#report-junit" id="report-junit"><code>--report-junit <FILE></code></a> | Generate JUnit File.<br><br>If the FILE report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#report-html" id="report-html"><code>--report-html <DIR></code></a> | Generate HTML report in DIR.<br><br>If the HTML report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#resolve" id="resolve"><code>--resolve <HOST:PORT:ADDR></code></a> | Provide a custom address for a specific host and port pair. Using this, you can make the Hurl requests(s) use a specified address and prevent the otherwise normally resolved address to be used. Consider it a sort of /etc/hosts alternative provided on the command line.<br> |
|
||||
| <a href="#retry" id="retry"><code>--retry</code></a> | Retry requests if any error occurs (asserts, captures, runtimes etc...).<br> |
|
||||
| <a href="#retry-interval" id="retry-interval"><code>--retry-interval <MILLISECONDS></code></a> | Duration in milliseconds between each retry. Default is 1000 ms.<br> |
|
||||
| <a href="#retry-max-count" id="retry-max-count"><code>--retry-max-count <NUM></code></a> | Maximum number of retries. Set this option to -1 to make it unlimited. Default is 10.<br> |
|
||||
| <a href="#ssl-no-revoke" id="ssl-no-revoke"><code>--ssl-no-revoke</code></a> | (Windows) This option tells Hurl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask for exactly that.<br> |
|
||||
| <a href="#test" id="test"><code>--test</code></a> | Activate test mode: with this, the HTTP response is not outputted anymore, progress is reported for each Hurl file tested, and a text summary is displayed when all files have been run.<br> |
|
||||
| <a href="#to-entry" id="to-entry"><code>--to-entry <ENTRY_NUMBER></code></a> | Execute Hurl file to ENTRY_NUMBER (starting at 1).<br>Ignore the remaining of the file. It is useful for debugging a session.<br> |
|
||||
| <a href="#user" id="user"><code>-u, --user <USER:PASSWORD></code></a> | Add basic Authentication header to each request.<br> |
|
||||
| <a href="#user-agent" id="user-agent"><code>-A, --user-agent <NAME></code></a> | Specify the User-Agent string to send to the HTTP server.<br> |
|
||||
| <a href="#variable" id="variable"><code>--variable <NAME=VALUE></code></a> | Define variable (name/value) to be used in Hurl templates.<br> |
|
||||
| <a href="#variables-file" id="variables-file"><code>--variables-file <FILE></code></a> | Set properties file in which your define your variables.<br><br>Each variable is defined as name=value exactly as with [`--variable`](#variable) option.<br><br>Note that defining a variable twice produces an error.<br> |
|
||||
| <a href="#verbose" id="verbose"><code>-v, --verbose</code></a> | Turn on verbose output on standard error stream.<br>Useful for debugging.<br><br>A line starting with '>' means data sent by Hurl.<br>A line staring with '<' means data received by Hurl.<br>A line starting with '*' means additional info provided by Hurl.<br><br>If you only want HTTP headers in the output, [`-i, --include`](#include) might be the option you're looking for.<br> |
|
||||
| <a href="#very-verbose" id="very-verbose"><code>--very-verbose</code></a> | Turn on more verbose output on standard error stream.<br><br>In contrast to [`--verbose`](#verbose) option, this option outputs the full HTTP body request and response on standard error. In addition, lines starting with '**' are libcurl debug logs.<br> |
|
||||
| <a href="#help" id="help"><code>-h, --help</code></a> | Usage help. This lists all current command line options with a short description.<br> |
|
||||
| <a href="#version" id="version"><code>-V, --version</code></a> | Prints version information<br> |
|
||||
|
||||
## Environment
|
||||
|
||||
@ -899,23 +899,23 @@ Environment variables can only be specified in lowercase.
|
||||
|
||||
Using an environment variable to set the proxy has the same effect as using the [`-x, --proxy`](#proxy) option.
|
||||
|
||||
| Variable | Description |
|
||||
| --- | --- |
|
||||
| `http_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTP.<br> |
|
||||
| `https_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTPS.<br> |
|
||||
| `all_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use if no protocol-specific proxy is set.<br> |
|
||||
| `no_proxy <comma-separated list of hosts>` | List of host names that shouldn't go through any proxy.<br> |
|
||||
| `HURL_name value` | Define variable (name/value) to be used in Hurl templates. This is similar than [`--variable`](#variable) and [`--variables-file`](#variables-file) options.<br> |
|
||||
| `NO_COLOR` | When set to a non-empty string, do not colorize output (see [`--no-color`](#no-color) option).<br> |
|
||||
| Variable | Description |
|
||||
|--------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| `http_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTP.<br> |
|
||||
| `https_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTPS.<br> |
|
||||
| `all_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use if no protocol-specific proxy is set.<br> |
|
||||
| `no_proxy <comma-separated list of hosts>` | List of host names that shouldn't go through any proxy.<br> |
|
||||
| `HURL_name value` | Define variable (name/value) to be used in Hurl templates. This is similar than [`--variable`](#variable) and [`--variables-file`](#variables-file) options.<br> |
|
||||
| `NO_COLOR` | When set to a non-empty string, do not colorize output (see [`--no-color`](#no-color) option).<br> |
|
||||
|
||||
## Exit Codes
|
||||
|
||||
| Value | Description |
|
||||
| --- | --- |
|
||||
| `1` | Failed to parse command-line options.<br> |
|
||||
| `2` | Input File Parsing Error.<br> |
|
||||
| `3` | Runtime error (such as failure to connect to host).<br> |
|
||||
| `4` | Assert Error.<br> |
|
||||
| Value | Description |
|
||||
|-------|---------------------------------------------------------|
|
||||
| `1` | Failed to parse command-line options.<br> |
|
||||
| `2` | Input File Parsing Error.<br> |
|
||||
| `3` | Runtime error (such as failure to connect to host).<br> |
|
||||
| `4` | Assert Error.<br> |
|
||||
|
||||
## WWW
|
||||
|
||||
@ -932,12 +932,12 @@ curl(1) hurlfmt(1)
|
||||
|
||||
### Linux
|
||||
|
||||
Precompiled binary is available at [hurl-2.0.0-x86_64-linux.tar.gz]:
|
||||
Precompiled binary is available at [hurl-2.0.1-x86_64-linux.tar.gz]:
|
||||
|
||||
```shell
|
||||
$ INSTALL_DIR=/tmp
|
||||
$ curl -sL https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-linux.tar.gz | tar xvz -C $INSTALL_DIR
|
||||
$ export PATH=$INSTALL_DIR/hurl-2.0.0:$PATH
|
||||
$ curl -sL https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-linux.tar.gz | tar xvz -C $INSTALL_DIR
|
||||
$ export PATH=$INSTALL_DIR/hurl-2.0.1:$PATH
|
||||
```
|
||||
|
||||
#### Debian / Ubuntu
|
||||
@ -945,8 +945,8 @@ $ export PATH=$INSTALL_DIR/hurl-2.0.0:$PATH
|
||||
For Debian / Ubuntu, Hurl can be installed using a binary .deb file provided in each Hurl release.
|
||||
|
||||
```shell
|
||||
$ curl -LO https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl_2.0.0_amd64.deb
|
||||
$ sudo apt update && apt install ./hurl_2.0.0_amd64.deb
|
||||
$ curl -LO https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl_2.0.1_amd64.deb
|
||||
$ sudo apt update && apt install ./hurl_2.0.1_amd64.deb
|
||||
```
|
||||
|
||||
#### Arch Linux / Manjaro
|
||||
@ -959,7 +959,7 @@ $ sudo apt update && apt install ./hurl_2.0.0_amd64.deb
|
||||
|
||||
### macOS
|
||||
|
||||
Precompiled binary is available at [hurl-2.0.0-x86_64-macos.tar.gz] for x86 CPUs and [hurl-2.0.0-arm64-macos.tar.gz] for ARM CPUS.
|
||||
Precompiled binary is available at [hurl-2.0.1-x86_64-macos.tar.gz] for x86 CPUs and [hurl-2.0.1-arm64-macos.tar.gz] for ARM CPUS.
|
||||
|
||||
#### Homebrew
|
||||
|
||||
@ -983,11 +983,11 @@ $ sudo pkg install hurl
|
||||
|
||||
#### Zip File
|
||||
|
||||
Hurl can be installed from a standalone zip file [hurl-2.0.0-win64.zip]. You will need to update your `PATH` variable.
|
||||
Hurl can be installed from a standalone zip file [hurl-2.0.1-win64.zip]. You will need to update your `PATH` variable.
|
||||
|
||||
#### Installer
|
||||
|
||||
An installer [hurl-2.0.0-win64-installer.exe] is also available.
|
||||
An installer [hurl-2.0.1-win64-installer.exe] is also available.
|
||||
|
||||
#### Chocolatey
|
||||
|
||||
@ -1113,11 +1113,11 @@ Please follow the [contrib on Windows section].
|
||||
[`--test` option]: https://hurl.dev/docs/manual.html#test
|
||||
[Hurl templates]: https://hurl.dev/docs/templates.html
|
||||
[GitHub]: https://github.com/Orange-OpenSource/hurl
|
||||
[hurl-2.0.0-win64.zip]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-win64.zip
|
||||
[hurl-2.0.0-win64-installer.exe]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-win64-installer.exe
|
||||
[hurl-2.0.0-x86_64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-macos.tar.gz
|
||||
[hurl-2.0.0-arm64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-arm64-macos.tar.gz
|
||||
[hurl-2.0.0-x86_64-linux.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-linux.tar.gz
|
||||
[hurl-2.0.1-win64.zip]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-win64.zip
|
||||
[hurl-2.0.1-win64-installer.exe]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-win64-installer.exe
|
||||
[hurl-2.0.1-x86_64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-macos.tar.gz
|
||||
[hurl-2.0.1-arm64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-arm64-macos.tar.gz
|
||||
[hurl-2.0.1-x86_64-linux.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-linux.tar.gz
|
||||
[AUR]: https://wiki.archlinux.org/index.php/Arch_User_Repository
|
||||
[`hurl-bin` package]: https://aur.archlinux.org/packages/hurl-bin/
|
||||
[install]: https://www.rust-lang.org/tools/install
|
||||
|
||||
@ -4,12 +4,12 @@
|
||||
|
||||
### Linux
|
||||
|
||||
Precompiled binary is available at [hurl-2.0.0-x86_64-linux.tar.gz]:
|
||||
Precompiled binary is available at [hurl-2.0.1-x86_64-linux.tar.gz]:
|
||||
|
||||
```shell
|
||||
$ INSTALL_DIR=/tmp
|
||||
$ curl -sL https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-linux.tar.gz | tar xvz -C $INSTALL_DIR
|
||||
$ export PATH=$INSTALL_DIR/hurl-2.0.0:$PATH
|
||||
$ curl -sL https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-linux.tar.gz | tar xvz -C $INSTALL_DIR
|
||||
$ export PATH=$INSTALL_DIR/hurl-2.0.1:$PATH
|
||||
```
|
||||
|
||||
#### Debian / Ubuntu
|
||||
@ -17,8 +17,8 @@ $ export PATH=$INSTALL_DIR/hurl-2.0.0:$PATH
|
||||
For Debian / Ubuntu, Hurl can be installed using a binary .deb file provided in each Hurl release.
|
||||
|
||||
```shell
|
||||
$ curl -LO https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl_2.0.0_amd64.deb
|
||||
$ sudo apt update && apt install ./hurl_2.0.0_amd64.deb
|
||||
$ curl -LO https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl_2.0.1_amd64.deb
|
||||
$ sudo apt update && apt install ./hurl_2.0.1_amd64.deb
|
||||
```
|
||||
|
||||
#### Arch Linux / Manjaro
|
||||
@ -31,7 +31,7 @@ $ sudo apt update && apt install ./hurl_2.0.0_amd64.deb
|
||||
|
||||
### macOS
|
||||
|
||||
Precompiled binary is available at [hurl-2.0.0-x86_64-macos.tar.gz] for x86 CPUs and [hurl-2.0.0-arm64-macos.tar.gz] for ARM CPUS.
|
||||
Precompiled binary is available at [hurl-2.0.1-x86_64-macos.tar.gz] for x86 CPUs and [hurl-2.0.1-arm64-macos.tar.gz] for ARM CPUS.
|
||||
|
||||
#### Homebrew
|
||||
|
||||
@ -55,11 +55,11 @@ $ sudo pkg install hurl
|
||||
|
||||
#### Zip File
|
||||
|
||||
Hurl can be installed from a standalone zip file [hurl-2.0.0-win64.zip]. You will need to update your `PATH` variable.
|
||||
Hurl can be installed from a standalone zip file [hurl-2.0.1-win64.zip]. You will need to update your `PATH` variable.
|
||||
|
||||
#### Installer
|
||||
|
||||
An installer [hurl-2.0.0-win64-installer.exe] is also available.
|
||||
An installer [hurl-2.0.1-win64-installer.exe] is also available.
|
||||
|
||||
#### Chocolatey
|
||||
|
||||
@ -156,11 +156,11 @@ $ ./target/release/hurl --version
|
||||
Please follow the [contrib on Windows section].
|
||||
|
||||
[GitHub]: https://github.com/Orange-OpenSource/hurl
|
||||
[hurl-2.0.0-win64.zip]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-win64.zip
|
||||
[hurl-2.0.0-win64-installer.exe]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-win64-installer.exe
|
||||
[hurl-2.0.0-x86_64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-macos.tar.gz
|
||||
[hurl-2.0.0-arm64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-arm64-macos.tar.gz
|
||||
[hurl-2.0.0-x86_64-linux.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-linux.tar.gz
|
||||
[hurl-2.0.1-win64.zip]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-win64.zip
|
||||
[hurl-2.0.1-win64-installer.exe]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-win64-installer.exe
|
||||
[hurl-2.0.1-x86_64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-macos.tar.gz
|
||||
[hurl-2.0.1-arm64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-arm64-macos.tar.gz
|
||||
[hurl-2.0.1-x86_64-linux.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-linux.tar.gz
|
||||
[AUR]: https://wiki.archlinux.org/index.php/Arch_User_Repository
|
||||
[`hurl-bin` package]: https://aur.archlinux.org/packages/hurl-bin/
|
||||
[install]: https://www.rust-lang.org/tools/install
|
||||
|
||||
116
docs/manual.md
116
docs/manual.md
@ -145,50 +145,50 @@ HTTP 200
|
||||
|
||||
will follow a redirection only for the second entry.
|
||||
|
||||
| Option | Description |
|
||||
| --- | --- |
|
||||
| <a href="#cacert" id="cacert"><code>--cacert <FILE></code></a> | Specifies the certificate file for peer verification. The file may contain multiple CA certificates and must be in PEM format.<br>Normally Hurl is built to use a default file for this, so this option is typically used to alter that default file.<br> |
|
||||
| <a href="#cert" id="cert"><code>-E, --cert <CERTIFICATE[:PASSWORD]></code></a> | Client certificate file and password.<br><br>See also [`--key`](#key).<br> |
|
||||
| <a href="#color" id="color"><code>--color</code></a> | Colorize debug output (the HTTP response output is not colorized). <br> |
|
||||
| <a href="#compressed" id="compressed"><code>--compressed</code></a> | Request a compressed response using one of the algorithms br, gzip, deflate and automatically decompress the content.<br> |
|
||||
| <a href="#connect-timeout" id="connect-timeout"><code>--connect-timeout <SECONDS></code></a> | Maximum time in seconds that you allow Hurl's connection to take.<br><br>See also [`-m, --max-time`](#max-time).<br> |
|
||||
| <a href="#connect-to" id="connect-to"><code>--connect-to <HOST1:PORT1:HOST2:PORT2></code></a> | For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. This option can be used several times in a command line.<br><br>See also [`--resolve`](#resolve).<br> |
|
||||
| <a href="#cookie" id="cookie"><code>-b, --cookie <FILE></code></a> | Read cookies from FILE (using the Netscape cookie file format).<br><br>Combined with [`-c, --cookie-jar`](#cookie-jar), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#cookie-jar" id="cookie-jar"><code>-c, --cookie-jar <FILE></code></a> | Write cookies to FILE after running the session (only for one session).<br>The file will be written using the Netscape cookie file format.<br><br>Combined with [`-b, --cookie`](#cookie), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#fail-at-end" id="fail-at-end"><code>--fail-at-end</code></a> | Continue executing requests to the end of the Hurl file even when an assert error occurs.<br>By default, Hurl exits after an assert error in the HTTP response.<br><br>Note that this option does not affect the behavior with multiple input Hurl files.<br><br>All the input files are executed independently. The result of one file does not affect the execution of the other Hurl files.<br> |
|
||||
| <a href="#file-root" id="file-root"><code>--file-root <DIR></code></a> | Set root file system to import files in Hurl. This is used for both files in multipart form data and request body.<br>When this is not explicitly defined, the files are relative to the current directory in which Hurl is running.<br> |
|
||||
| <a href="#location" id="location"><code>-L, --location</code></a> | Follow redirect. To limit the amount of redirects to follow use the [`--max-redirs`](#max-redirs) option<br> |
|
||||
| <a href="#glob" id="glob"><code>--glob <GLOB></code></a> | Specify input files that match the given glob pattern.<br><br>Multiple glob flags may be used. This flag supports common Unix glob patterns like *, ? and []. <br>However, to avoid your shell accidentally expanding glob patterns before Hurl handles them, you must use single quotes or double quotes around each pattern.<br> |
|
||||
| <a href="#include" id="include"><code>-i, --include</code></a> | Include the HTTP headers in the output (last entry).<br> |
|
||||
| <a href="#ignore-asserts" id="ignore-asserts"><code>--ignore-asserts</code></a> | Ignore all asserts defined in the Hurl file.<br> |
|
||||
| <a href="#insecure" id="insecure"><code>-k, --insecure</code></a> | This option explicitly allows Hurl to perform "insecure" SSL connections and transfers.<br> |
|
||||
| <a href="#interactive" id="interactive"><code>--interactive</code></a> | Stop between requests.<br>This is similar to a break point, You can then continue (Press C) or quit (Press Q).<br> |
|
||||
| <a href="#json" id="json"><code>--json</code></a> | Output each hurl file result to JSON. The format is very closed to HAR format. <br> |
|
||||
| <a href="#key" id="key"><code>--key <KEY></code></a> | Private key file name.<br> |
|
||||
| <a href="#max-redirs" id="max-redirs"><code>--max-redirs <NUM></code></a> | Set maximum number of redirection-followings allowed<br>By default, the limit is set to 50 redirections. Set this option to -1 to make it unlimited.<br> |
|
||||
| <a href="#max-time" id="max-time"><code>-m, --max-time <SECONDS></code></a> | Maximum time in seconds that you allow a request/response to take. This is the standard timeout.<br><br>See also [`--connect-timeout`](#connect-timeout).<br> |
|
||||
| <a href="#no-color" id="no-color"><code>--no-color</code></a> | Do not colorize output.<br> |
|
||||
| <a href="#no-output" id="no-output"><code>--no-output</code></a> | Suppress output. By default, Hurl outputs the body of the last response.<br> |
|
||||
| <a href="#noproxy" id="noproxy"><code>--noproxy <HOST(S)></code></a> | Comma-separated list of hosts which do not use a proxy.<br>Override value from Environment variable no_proxy.<br> |
|
||||
| <a href="#output" id="output"><code>-o, --output <FILE></code></a> | Write output to FILE instead of stdout.<br> |
|
||||
| <a href="#proxy" id="proxy"><code>-x, --proxy <[PROTOCOL://]HOST[:PORT]></code></a> | Use the specified proxy.<br> |
|
||||
| <a href="#report-junit" id="report-junit"><code>--report-junit <FILE></code></a> | Generate JUnit File.<br><br>If the FILE report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#report-html" id="report-html"><code>--report-html <DIR></code></a> | Generate HTML report in DIR.<br><br>If the HTML report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#resolve" id="resolve"><code>--resolve <HOST:PORT:ADDR></code></a> | Provide a custom address for a specific host and port pair. Using this, you can make the Hurl requests(s) use a specified address and prevent the otherwise normally resolved address to be used. Consider it a sort of /etc/hosts alternative provided on the command line.<br> |
|
||||
| <a href="#retry" id="retry"><code>--retry</code></a> | Retry requests if any error occurs (asserts, captures, runtimes etc...).<br> |
|
||||
| <a href="#retry-interval" id="retry-interval"><code>--retry-interval <MILLISECONDS></code></a> | Duration in milliseconds between each retry. Default is 1000 ms.<br> |
|
||||
| <a href="#retry-max-count" id="retry-max-count"><code>--retry-max-count <NUM></code></a> | Maximum number of retries. Set this option to -1 to make it unlimited. Default is 10.<br> |
|
||||
| <a href="#ssl-no-revoke" id="ssl-no-revoke"><code>--ssl-no-revoke</code></a> | (Windows) This option tells Hurl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask for exactly that.<br> |
|
||||
| <a href="#test" id="test"><code>--test</code></a> | Activate test mode: with this, the HTTP response is not outputted anymore, progress is reported for each Hurl file tested, and a text summary is displayed when all files have been run.<br> |
|
||||
| <a href="#to-entry" id="to-entry"><code>--to-entry <ENTRY_NUMBER></code></a> | Execute Hurl file to ENTRY_NUMBER (starting at 1).<br>Ignore the remaining of the file. It is useful for debugging a session.<br> |
|
||||
| <a href="#user" id="user"><code>-u, --user <USER:PASSWORD></code></a> | Add basic Authentication header to each request.<br> |
|
||||
| <a href="#user-agent" id="user-agent"><code>-A, --user-agent <NAME></code></a> | Specify the User-Agent string to send to the HTTP server.<br> |
|
||||
| <a href="#variable" id="variable"><code>--variable <NAME=VALUE></code></a> | Define variable (name/value) to be used in Hurl templates.<br> |
|
||||
| <a href="#variables-file" id="variables-file"><code>--variables-file <FILE></code></a> | Set properties file in which your define your variables.<br><br>Each variable is defined as name=value exactly as with [`--variable`](#variable) option.<br><br>Note that defining a variable twice produces an error.<br> |
|
||||
| <a href="#verbose" id="verbose"><code>-v, --verbose</code></a> | Turn on verbose output on standard error stream.<br>Useful for debugging.<br><br>A line starting with '>' means data sent by Hurl.<br>A line staring with '<' means data received by Hurl.<br>A line starting with '*' means additional info provided by Hurl.<br><br>If you only want HTTP headers in the output, [`-i, --include`](#include) might be the option you're looking for.<br> |
|
||||
| <a href="#very-verbose" id="very-verbose"><code>--very-verbose</code></a> | Turn on more verbose output on standard error stream.<br><br>In contrast to [`--verbose`](#verbose) option, this option outputs the full HTTP body request and response on standard error. In addition, lines starting with '**' are libcurl debug logs.<br> |
|
||||
| <a href="#help" id="help"><code>-h, --help</code></a> | Usage help. This lists all current command line options with a short description.<br> |
|
||||
| <a href="#version" id="version"><code>-V, --version</code></a> | Prints version information<br> |
|
||||
| Option | Description |
|
||||
|------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| <a href="#cacert" id="cacert"><code>--cacert <FILE></code></a> | Specifies the certificate file for peer verification. The file may contain multiple CA certificates and must be in PEM format.<br>Normally Hurl is built to use a default file for this, so this option is typically used to alter that default file.<br> |
|
||||
| <a href="#cert" id="cert"><code>-E, --cert <CERTIFICATE[:PASSWORD]></code></a> | Client certificate file and password.<br><br>See also [`--key`](#key).<br> |
|
||||
| <a href="#color" id="color"><code>--color</code></a> | Colorize debug output (the HTTP response output is not colorized). <br> |
|
||||
| <a href="#compressed" id="compressed"><code>--compressed</code></a> | Request a compressed response using one of the algorithms br, gzip, deflate and automatically decompress the content.<br> |
|
||||
| <a href="#connect-timeout" id="connect-timeout"><code>--connect-timeout <SECONDS></code></a> | Maximum time in seconds that you allow Hurl's connection to take.<br><br>See also [`-m, --max-time`](#max-time).<br> |
|
||||
| <a href="#connect-to" id="connect-to"><code>--connect-to <HOST1:PORT1:HOST2:PORT2></code></a> | For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. This option can be used several times in a command line.<br><br>See also [`--resolve`](#resolve).<br> |
|
||||
| <a href="#cookie" id="cookie"><code>-b, --cookie <FILE></code></a> | Read cookies from FILE (using the Netscape cookie file format).<br><br>Combined with [`-c, --cookie-jar`](#cookie-jar), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#cookie-jar" id="cookie-jar"><code>-c, --cookie-jar <FILE></code></a> | Write cookies to FILE after running the session (only for one session).<br>The file will be written using the Netscape cookie file format.<br><br>Combined with [`-b, --cookie`](#cookie), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#fail-at-end" id="fail-at-end"><code>--fail-at-end</code></a> | Continue executing requests to the end of the Hurl file even when an assert error occurs.<br>By default, Hurl exits after an assert error in the HTTP response.<br><br>Note that this option does not affect the behavior with multiple input Hurl files.<br><br>All the input files are executed independently. The result of one file does not affect the execution of the other Hurl files.<br> |
|
||||
| <a href="#file-root" id="file-root"><code>--file-root <DIR></code></a> | Set root file system to import files in Hurl. This is used for both files in multipart form data and request body.<br>When this is not explicitly defined, the files are relative to the current directory in which Hurl is running.<br> |
|
||||
| <a href="#location" id="location"><code>-L, --location</code></a> | Follow redirect. To limit the amount of redirects to follow use the [`--max-redirs`](#max-redirs) option<br> |
|
||||
| <a href="#glob" id="glob"><code>--glob <GLOB></code></a> | Specify input files that match the given glob pattern.<br><br>Multiple glob flags may be used. This flag supports common Unix glob patterns like *, ? and []. <br>However, to avoid your shell accidentally expanding glob patterns before Hurl handles them, you must use single quotes or double quotes around each pattern.<br> |
|
||||
| <a href="#include" id="include"><code>-i, --include</code></a> | Include the HTTP headers in the output (last entry).<br> |
|
||||
| <a href="#ignore-asserts" id="ignore-asserts"><code>--ignore-asserts</code></a> | Ignore all asserts defined in the Hurl file.<br> |
|
||||
| <a href="#insecure" id="insecure"><code>-k, --insecure</code></a> | This option explicitly allows Hurl to perform "insecure" SSL connections and transfers.<br> |
|
||||
| <a href="#interactive" id="interactive"><code>--interactive</code></a> | Stop between requests.<br>This is similar to a break point, You can then continue (Press C) or quit (Press Q).<br> |
|
||||
| <a href="#json" id="json"><code>--json</code></a> | Output each hurl file result to JSON. The format is very closed to HAR format. <br> |
|
||||
| <a href="#key" id="key"><code>--key <KEY></code></a> | Private key file name.<br> |
|
||||
| <a href="#max-redirs" id="max-redirs"><code>--max-redirs <NUM></code></a> | Set maximum number of redirection-followings allowed<br>By default, the limit is set to 50 redirections. Set this option to -1 to make it unlimited.<br> |
|
||||
| <a href="#max-time" id="max-time"><code>-m, --max-time <SECONDS></code></a> | Maximum time in seconds that you allow a request/response to take. This is the standard timeout.<br><br>See also [`--connect-timeout`](#connect-timeout).<br> |
|
||||
| <a href="#no-color" id="no-color"><code>--no-color</code></a> | Do not colorize output.<br> |
|
||||
| <a href="#no-output" id="no-output"><code>--no-output</code></a> | Suppress output. By default, Hurl outputs the body of the last response.<br> |
|
||||
| <a href="#noproxy" id="noproxy"><code>--noproxy <HOST(S)></code></a> | Comma-separated list of hosts which do not use a proxy.<br>Override value from Environment variable no_proxy.<br> |
|
||||
| <a href="#output" id="output"><code>-o, --output <FILE></code></a> | Write output to FILE instead of stdout.<br> |
|
||||
| <a href="#proxy" id="proxy"><code>-x, --proxy <[PROTOCOL://]HOST[:PORT]></code></a> | Use the specified proxy.<br> |
|
||||
| <a href="#report-junit" id="report-junit"><code>--report-junit <FILE></code></a> | Generate JUnit File.<br><br>If the FILE report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#report-html" id="report-html"><code>--report-html <DIR></code></a> | Generate HTML report in DIR.<br><br>If the HTML report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#resolve" id="resolve"><code>--resolve <HOST:PORT:ADDR></code></a> | Provide a custom address for a specific host and port pair. Using this, you can make the Hurl requests(s) use a specified address and prevent the otherwise normally resolved address to be used. Consider it a sort of /etc/hosts alternative provided on the command line.<br> |
|
||||
| <a href="#retry" id="retry"><code>--retry</code></a> | Retry requests if any error occurs (asserts, captures, runtimes etc...).<br> |
|
||||
| <a href="#retry-interval" id="retry-interval"><code>--retry-interval <MILLISECONDS></code></a> | Duration in milliseconds between each retry. Default is 1000 ms.<br> |
|
||||
| <a href="#retry-max-count" id="retry-max-count"><code>--retry-max-count <NUM></code></a> | Maximum number of retries. Set this option to -1 to make it unlimited. Default is 10.<br> |
|
||||
| <a href="#ssl-no-revoke" id="ssl-no-revoke"><code>--ssl-no-revoke</code></a> | (Windows) This option tells Hurl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask for exactly that.<br> |
|
||||
| <a href="#test" id="test"><code>--test</code></a> | Activate test mode: with this, the HTTP response is not outputted anymore, progress is reported for each Hurl file tested, and a text summary is displayed when all files have been run.<br> |
|
||||
| <a href="#to-entry" id="to-entry"><code>--to-entry <ENTRY_NUMBER></code></a> | Execute Hurl file to ENTRY_NUMBER (starting at 1).<br>Ignore the remaining of the file. It is useful for debugging a session.<br> |
|
||||
| <a href="#user" id="user"><code>-u, --user <USER:PASSWORD></code></a> | Add basic Authentication header to each request.<br> |
|
||||
| <a href="#user-agent" id="user-agent"><code>-A, --user-agent <NAME></code></a> | Specify the User-Agent string to send to the HTTP server.<br> |
|
||||
| <a href="#variable" id="variable"><code>--variable <NAME=VALUE></code></a> | Define variable (name/value) to be used in Hurl templates.<br> |
|
||||
| <a href="#variables-file" id="variables-file"><code>--variables-file <FILE></code></a> | Set properties file in which your define your variables.<br><br>Each variable is defined as name=value exactly as with [`--variable`](#variable) option.<br><br>Note that defining a variable twice produces an error.<br> |
|
||||
| <a href="#verbose" id="verbose"><code>-v, --verbose</code></a> | Turn on verbose output on standard error stream.<br>Useful for debugging.<br><br>A line starting with '>' means data sent by Hurl.<br>A line staring with '<' means data received by Hurl.<br>A line starting with '*' means additional info provided by Hurl.<br><br>If you only want HTTP headers in the output, [`-i, --include`](#include) might be the option you're looking for.<br> |
|
||||
| <a href="#very-verbose" id="very-verbose"><code>--very-verbose</code></a> | Turn on more verbose output on standard error stream.<br><br>In contrast to [`--verbose`](#verbose) option, this option outputs the full HTTP body request and response on standard error. In addition, lines starting with '**' are libcurl debug logs.<br> |
|
||||
| <a href="#help" id="help"><code>-h, --help</code></a> | Usage help. This lists all current command line options with a short description.<br> |
|
||||
| <a href="#version" id="version"><code>-V, --version</code></a> | Prints version information<br> |
|
||||
|
||||
## Environment
|
||||
|
||||
@ -196,23 +196,23 @@ Environment variables can only be specified in lowercase.
|
||||
|
||||
Using an environment variable to set the proxy has the same effect as using the [`-x, --proxy`](#proxy) option.
|
||||
|
||||
| Variable | Description |
|
||||
| --- | --- |
|
||||
| `http_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTP.<br> |
|
||||
| `https_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTPS.<br> |
|
||||
| `all_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use if no protocol-specific proxy is set.<br> |
|
||||
| `no_proxy <comma-separated list of hosts>` | List of host names that shouldn't go through any proxy.<br> |
|
||||
| `HURL_name value` | Define variable (name/value) to be used in Hurl templates. This is similar than [`--variable`](#variable) and [`--variables-file`](#variables-file) options.<br> |
|
||||
| `NO_COLOR` | When set to a non-empty string, do not colorize output (see [`--no-color`](#no-color) option).<br> |
|
||||
| Variable | Description |
|
||||
|--------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| `http_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTP.<br> |
|
||||
| `https_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTPS.<br> |
|
||||
| `all_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use if no protocol-specific proxy is set.<br> |
|
||||
| `no_proxy <comma-separated list of hosts>` | List of host names that shouldn't go through any proxy.<br> |
|
||||
| `HURL_name value` | Define variable (name/value) to be used in Hurl templates. This is similar than [`--variable`](#variable) and [`--variables-file`](#variables-file) options.<br> |
|
||||
| `NO_COLOR` | When set to a non-empty string, do not colorize output (see [`--no-color`](#no-color) option).<br> |
|
||||
|
||||
## Exit Codes
|
||||
|
||||
| Value | Description |
|
||||
| --- | --- |
|
||||
| `1` | Failed to parse command-line options.<br> |
|
||||
| `2` | Input File Parsing Error.<br> |
|
||||
| `3` | Runtime error (such as failure to connect to host).<br> |
|
||||
| `4` | Assert Error.<br> |
|
||||
| Value | Description |
|
||||
|-------|---------------------------------------------------------|
|
||||
| `1` | Failed to parse command-line options.<br> |
|
||||
| `2` | Input File Parsing Error.<br> |
|
||||
| `3` | Runtime error (such as failure to connect to host).<br> |
|
||||
| `4` | Assert Error.<br> |
|
||||
|
||||
## WWW
|
||||
|
||||
|
||||
@ -848,50 +848,50 @@ HTTP 200
|
||||
|
||||
will follow a redirection only for the second entry.
|
||||
|
||||
| Option | Description |
|
||||
| --- | --- |
|
||||
| <a href="#cacert" id="cacert"><code>--cacert <FILE></code></a> | Specifies the certificate file for peer verification. The file may contain multiple CA certificates and must be in PEM format.<br>Normally Hurl is built to use a default file for this, so this option is typically used to alter that default file.<br> |
|
||||
| <a href="#cert" id="cert"><code>-E, --cert <CERTIFICATE[:PASSWORD]></code></a> | Client certificate file and password.<br><br>See also [`--key`](#key).<br> |
|
||||
| <a href="#color" id="color"><code>--color</code></a> | Colorize debug output (the HTTP response output is not colorized). <br> |
|
||||
| <a href="#compressed" id="compressed"><code>--compressed</code></a> | Request a compressed response using one of the algorithms br, gzip, deflate and automatically decompress the content.<br> |
|
||||
| <a href="#connect-timeout" id="connect-timeout"><code>--connect-timeout <SECONDS></code></a> | Maximum time in seconds that you allow Hurl's connection to take.<br><br>See also [`-m, --max-time`](#max-time).<br> |
|
||||
| <a href="#connect-to" id="connect-to"><code>--connect-to <HOST1:PORT1:HOST2:PORT2></code></a> | For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. This option can be used several times in a command line.<br><br>See also [`--resolve`](#resolve).<br> |
|
||||
| <a href="#cookie" id="cookie"><code>-b, --cookie <FILE></code></a> | Read cookies from FILE (using the Netscape cookie file format).<br><br>Combined with [`-c, --cookie-jar`](#cookie-jar), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#cookie-jar" id="cookie-jar"><code>-c, --cookie-jar <FILE></code></a> | Write cookies to FILE after running the session (only for one session).<br>The file will be written using the Netscape cookie file format.<br><br>Combined with [`-b, --cookie`](#cookie), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#fail-at-end" id="fail-at-end"><code>--fail-at-end</code></a> | Continue executing requests to the end of the Hurl file even when an assert error occurs.<br>By default, Hurl exits after an assert error in the HTTP response.<br><br>Note that this option does not affect the behavior with multiple input Hurl files.<br><br>All the input files are executed independently. The result of one file does not affect the execution of the other Hurl files.<br> |
|
||||
| <a href="#file-root" id="file-root"><code>--file-root <DIR></code></a> | Set root file system to import files in Hurl. This is used for both files in multipart form data and request body.<br>When this is not explicitly defined, the files are relative to the current directory in which Hurl is running.<br> |
|
||||
| <a href="#location" id="location"><code>-L, --location</code></a> | Follow redirect. To limit the amount of redirects to follow use the [`--max-redirs`](#max-redirs) option<br> |
|
||||
| <a href="#glob" id="glob"><code>--glob <GLOB></code></a> | Specify input files that match the given glob pattern.<br><br>Multiple glob flags may be used. This flag supports common Unix glob patterns like *, ? and []. <br>However, to avoid your shell accidentally expanding glob patterns before Hurl handles them, you must use single quotes or double quotes around each pattern.<br> |
|
||||
| <a href="#include" id="include"><code>-i, --include</code></a> | Include the HTTP headers in the output (last entry).<br> |
|
||||
| <a href="#ignore-asserts" id="ignore-asserts"><code>--ignore-asserts</code></a> | Ignore all asserts defined in the Hurl file.<br> |
|
||||
| <a href="#insecure" id="insecure"><code>-k, --insecure</code></a> | This option explicitly allows Hurl to perform "insecure" SSL connections and transfers.<br> |
|
||||
| <a href="#interactive" id="interactive"><code>--interactive</code></a> | Stop between requests.<br>This is similar to a break point, You can then continue (Press C) or quit (Press Q).<br> |
|
||||
| <a href="#json" id="json"><code>--json</code></a> | Output each hurl file result to JSON. The format is very closed to HAR format. <br> |
|
||||
| <a href="#key" id="key"><code>--key <KEY></code></a> | Private key file name.<br> |
|
||||
| <a href="#max-redirs" id="max-redirs"><code>--max-redirs <NUM></code></a> | Set maximum number of redirection-followings allowed<br>By default, the limit is set to 50 redirections. Set this option to -1 to make it unlimited.<br> |
|
||||
| <a href="#max-time" id="max-time"><code>-m, --max-time <SECONDS></code></a> | Maximum time in seconds that you allow a request/response to take. This is the standard timeout.<br><br>See also [`--connect-timeout`](#connect-timeout).<br> |
|
||||
| <a href="#no-color" id="no-color"><code>--no-color</code></a> | Do not colorize output.<br> |
|
||||
| <a href="#no-output" id="no-output"><code>--no-output</code></a> | Suppress output. By default, Hurl outputs the body of the last response.<br> |
|
||||
| <a href="#noproxy" id="noproxy"><code>--noproxy <HOST(S)></code></a> | Comma-separated list of hosts which do not use a proxy.<br>Override value from Environment variable no_proxy.<br> |
|
||||
| <a href="#output" id="output"><code>-o, --output <FILE></code></a> | Write output to FILE instead of stdout.<br> |
|
||||
| <a href="#proxy" id="proxy"><code>-x, --proxy <[PROTOCOL://]HOST[:PORT]></code></a> | Use the specified proxy.<br> |
|
||||
| <a href="#report-junit" id="report-junit"><code>--report-junit <FILE></code></a> | Generate JUnit File.<br><br>If the FILE report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#report-html" id="report-html"><code>--report-html <DIR></code></a> | Generate HTML report in DIR.<br><br>If the HTML report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#resolve" id="resolve"><code>--resolve <HOST:PORT:ADDR></code></a> | Provide a custom address for a specific host and port pair. Using this, you can make the Hurl requests(s) use a specified address and prevent the otherwise normally resolved address to be used. Consider it a sort of /etc/hosts alternative provided on the command line.<br> |
|
||||
| <a href="#retry" id="retry"><code>--retry</code></a> | Retry requests if any error occurs (asserts, captures, runtimes etc...).<br> |
|
||||
| <a href="#retry-interval" id="retry-interval"><code>--retry-interval <MILLISECONDS></code></a> | Duration in milliseconds between each retry. Default is 1000 ms.<br> |
|
||||
| <a href="#retry-max-count" id="retry-max-count"><code>--retry-max-count <NUM></code></a> | Maximum number of retries. Set this option to -1 to make it unlimited. Default is 10.<br> |
|
||||
| <a href="#ssl-no-revoke" id="ssl-no-revoke"><code>--ssl-no-revoke</code></a> | (Windows) This option tells Hurl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask for exactly that.<br> |
|
||||
| <a href="#test" id="test"><code>--test</code></a> | Activate test mode: with this, the HTTP response is not outputted anymore, progress is reported for each Hurl file tested, and a text summary is displayed when all files have been run.<br> |
|
||||
| <a href="#to-entry" id="to-entry"><code>--to-entry <ENTRY_NUMBER></code></a> | Execute Hurl file to ENTRY_NUMBER (starting at 1).<br>Ignore the remaining of the file. It is useful for debugging a session.<br> |
|
||||
| <a href="#user" id="user"><code>-u, --user <USER:PASSWORD></code></a> | Add basic Authentication header to each request.<br> |
|
||||
| <a href="#user-agent" id="user-agent"><code>-A, --user-agent <NAME></code></a> | Specify the User-Agent string to send to the HTTP server.<br> |
|
||||
| <a href="#variable" id="variable"><code>--variable <NAME=VALUE></code></a> | Define variable (name/value) to be used in Hurl templates.<br> |
|
||||
| <a href="#variables-file" id="variables-file"><code>--variables-file <FILE></code></a> | Set properties file in which your define your variables.<br><br>Each variable is defined as name=value exactly as with [`--variable`](#variable) option.<br><br>Note that defining a variable twice produces an error.<br> |
|
||||
| <a href="#verbose" id="verbose"><code>-v, --verbose</code></a> | Turn on verbose output on standard error stream.<br>Useful for debugging.<br><br>A line starting with '>' means data sent by Hurl.<br>A line staring with '<' means data received by Hurl.<br>A line starting with '*' means additional info provided by Hurl.<br><br>If you only want HTTP headers in the output, [`-i, --include`](#include) might be the option you're looking for.<br> |
|
||||
| <a href="#very-verbose" id="very-verbose"><code>--very-verbose</code></a> | Turn on more verbose output on standard error stream.<br><br>In contrast to [`--verbose`](#verbose) option, this option outputs the full HTTP body request and response on standard error. In addition, lines starting with '**' are libcurl debug logs.<br> |
|
||||
| <a href="#help" id="help"><code>-h, --help</code></a> | Usage help. This lists all current command line options with a short description.<br> |
|
||||
| <a href="#version" id="version"><code>-V, --version</code></a> | Prints version information<br> |
|
||||
| Option | Description |
|
||||
|------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| <a href="#cacert" id="cacert"><code>--cacert <FILE></code></a> | Specifies the certificate file for peer verification. The file may contain multiple CA certificates and must be in PEM format.<br>Normally Hurl is built to use a default file for this, so this option is typically used to alter that default file.<br> |
|
||||
| <a href="#cert" id="cert"><code>-E, --cert <CERTIFICATE[:PASSWORD]></code></a> | Client certificate file and password.<br><br>See also [`--key`](#key).<br> |
|
||||
| <a href="#color" id="color"><code>--color</code></a> | Colorize debug output (the HTTP response output is not colorized). <br> |
|
||||
| <a href="#compressed" id="compressed"><code>--compressed</code></a> | Request a compressed response using one of the algorithms br, gzip, deflate and automatically decompress the content.<br> |
|
||||
| <a href="#connect-timeout" id="connect-timeout"><code>--connect-timeout <SECONDS></code></a> | Maximum time in seconds that you allow Hurl's connection to take.<br><br>See also [`-m, --max-time`](#max-time).<br> |
|
||||
| <a href="#connect-to" id="connect-to"><code>--connect-to <HOST1:PORT1:HOST2:PORT2></code></a> | For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2 instead. This option can be used several times in a command line.<br><br>See also [`--resolve`](#resolve).<br> |
|
||||
| <a href="#cookie" id="cookie"><code>-b, --cookie <FILE></code></a> | Read cookies from FILE (using the Netscape cookie file format).<br><br>Combined with [`-c, --cookie-jar`](#cookie-jar), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#cookie-jar" id="cookie-jar"><code>-c, --cookie-jar <FILE></code></a> | Write cookies to FILE after running the session (only for one session).<br>The file will be written using the Netscape cookie file format.<br><br>Combined with [`-b, --cookie`](#cookie), you can simulate a cookie storage between successive Hurl runs.<br> |
|
||||
| <a href="#fail-at-end" id="fail-at-end"><code>--fail-at-end</code></a> | Continue executing requests to the end of the Hurl file even when an assert error occurs.<br>By default, Hurl exits after an assert error in the HTTP response.<br><br>Note that this option does not affect the behavior with multiple input Hurl files.<br><br>All the input files are executed independently. The result of one file does not affect the execution of the other Hurl files.<br> |
|
||||
| <a href="#file-root" id="file-root"><code>--file-root <DIR></code></a> | Set root file system to import files in Hurl. This is used for both files in multipart form data and request body.<br>When this is not explicitly defined, the files are relative to the current directory in which Hurl is running.<br> |
|
||||
| <a href="#location" id="location"><code>-L, --location</code></a> | Follow redirect. To limit the amount of redirects to follow use the [`--max-redirs`](#max-redirs) option<br> |
|
||||
| <a href="#glob" id="glob"><code>--glob <GLOB></code></a> | Specify input files that match the given glob pattern.<br><br>Multiple glob flags may be used. This flag supports common Unix glob patterns like *, ? and []. <br>However, to avoid your shell accidentally expanding glob patterns before Hurl handles them, you must use single quotes or double quotes around each pattern.<br> |
|
||||
| <a href="#include" id="include"><code>-i, --include</code></a> | Include the HTTP headers in the output (last entry).<br> |
|
||||
| <a href="#ignore-asserts" id="ignore-asserts"><code>--ignore-asserts</code></a> | Ignore all asserts defined in the Hurl file.<br> |
|
||||
| <a href="#insecure" id="insecure"><code>-k, --insecure</code></a> | This option explicitly allows Hurl to perform "insecure" SSL connections and transfers.<br> |
|
||||
| <a href="#interactive" id="interactive"><code>--interactive</code></a> | Stop between requests.<br>This is similar to a break point, You can then continue (Press C) or quit (Press Q).<br> |
|
||||
| <a href="#json" id="json"><code>--json</code></a> | Output each hurl file result to JSON. The format is very closed to HAR format. <br> |
|
||||
| <a href="#key" id="key"><code>--key <KEY></code></a> | Private key file name.<br> |
|
||||
| <a href="#max-redirs" id="max-redirs"><code>--max-redirs <NUM></code></a> | Set maximum number of redirection-followings allowed<br>By default, the limit is set to 50 redirections. Set this option to -1 to make it unlimited.<br> |
|
||||
| <a href="#max-time" id="max-time"><code>-m, --max-time <SECONDS></code></a> | Maximum time in seconds that you allow a request/response to take. This is the standard timeout.<br><br>See also [`--connect-timeout`](#connect-timeout).<br> |
|
||||
| <a href="#no-color" id="no-color"><code>--no-color</code></a> | Do not colorize output.<br> |
|
||||
| <a href="#no-output" id="no-output"><code>--no-output</code></a> | Suppress output. By default, Hurl outputs the body of the last response.<br> |
|
||||
| <a href="#noproxy" id="noproxy"><code>--noproxy <HOST(S)></code></a> | Comma-separated list of hosts which do not use a proxy.<br>Override value from Environment variable no_proxy.<br> |
|
||||
| <a href="#output" id="output"><code>-o, --output <FILE></code></a> | Write output to FILE instead of stdout.<br> |
|
||||
| <a href="#proxy" id="proxy"><code>-x, --proxy <[PROTOCOL://]HOST[:PORT]></code></a> | Use the specified proxy.<br> |
|
||||
| <a href="#report-junit" id="report-junit"><code>--report-junit <FILE></code></a> | Generate JUnit File.<br><br>If the FILE report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#report-html" id="report-html"><code>--report-html <DIR></code></a> | Generate HTML report in DIR.<br><br>If the HTML report already exists, it will be updated with the new test results.<br> |
|
||||
| <a href="#resolve" id="resolve"><code>--resolve <HOST:PORT:ADDR></code></a> | Provide a custom address for a specific host and port pair. Using this, you can make the Hurl requests(s) use a specified address and prevent the otherwise normally resolved address to be used. Consider it a sort of /etc/hosts alternative provided on the command line.<br> |
|
||||
| <a href="#retry" id="retry"><code>--retry</code></a> | Retry requests if any error occurs (asserts, captures, runtimes etc...).<br> |
|
||||
| <a href="#retry-interval" id="retry-interval"><code>--retry-interval <MILLISECONDS></code></a> | Duration in milliseconds between each retry. Default is 1000 ms.<br> |
|
||||
| <a href="#retry-max-count" id="retry-max-count"><code>--retry-max-count <NUM></code></a> | Maximum number of retries. Set this option to -1 to make it unlimited. Default is 10.<br> |
|
||||
| <a href="#ssl-no-revoke" id="ssl-no-revoke"><code>--ssl-no-revoke</code></a> | (Windows) This option tells Hurl to disable certificate revocation checks. WARNING: this option loosens the SSL security, and by using this flag you ask for exactly that.<br> |
|
||||
| <a href="#test" id="test"><code>--test</code></a> | Activate test mode: with this, the HTTP response is not outputted anymore, progress is reported for each Hurl file tested, and a text summary is displayed when all files have been run.<br> |
|
||||
| <a href="#to-entry" id="to-entry"><code>--to-entry <ENTRY_NUMBER></code></a> | Execute Hurl file to ENTRY_NUMBER (starting at 1).<br>Ignore the remaining of the file. It is useful for debugging a session.<br> |
|
||||
| <a href="#user" id="user"><code>-u, --user <USER:PASSWORD></code></a> | Add basic Authentication header to each request.<br> |
|
||||
| <a href="#user-agent" id="user-agent"><code>-A, --user-agent <NAME></code></a> | Specify the User-Agent string to send to the HTTP server.<br> |
|
||||
| <a href="#variable" id="variable"><code>--variable <NAME=VALUE></code></a> | Define variable (name/value) to be used in Hurl templates.<br> |
|
||||
| <a href="#variables-file" id="variables-file"><code>--variables-file <FILE></code></a> | Set properties file in which your define your variables.<br><br>Each variable is defined as name=value exactly as with [`--variable`](#variable) option.<br><br>Note that defining a variable twice produces an error.<br> |
|
||||
| <a href="#verbose" id="verbose"><code>-v, --verbose</code></a> | Turn on verbose output on standard error stream.<br>Useful for debugging.<br><br>A line starting with '>' means data sent by Hurl.<br>A line staring with '<' means data received by Hurl.<br>A line starting with '*' means additional info provided by Hurl.<br><br>If you only want HTTP headers in the output, [`-i, --include`](#include) might be the option you're looking for.<br> |
|
||||
| <a href="#very-verbose" id="very-verbose"><code>--very-verbose</code></a> | Turn on more verbose output on standard error stream.<br><br>In contrast to [`--verbose`](#verbose) option, this option outputs the full HTTP body request and response on standard error. In addition, lines starting with '**' are libcurl debug logs.<br> |
|
||||
| <a href="#help" id="help"><code>-h, --help</code></a> | Usage help. This lists all current command line options with a short description.<br> |
|
||||
| <a href="#version" id="version"><code>-V, --version</code></a> | Prints version information<br> |
|
||||
|
||||
## Environment
|
||||
|
||||
@ -899,23 +899,23 @@ Environment variables can only be specified in lowercase.
|
||||
|
||||
Using an environment variable to set the proxy has the same effect as using the [`-x, --proxy`](#proxy) option.
|
||||
|
||||
| Variable | Description |
|
||||
| --- | --- |
|
||||
| `http_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTP.<br> |
|
||||
| `https_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTPS.<br> |
|
||||
| `all_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use if no protocol-specific proxy is set.<br> |
|
||||
| `no_proxy <comma-separated list of hosts>` | List of host names that shouldn't go through any proxy.<br> |
|
||||
| `HURL_name value` | Define variable (name/value) to be used in Hurl templates. This is similar than [`--variable`](#variable) and [`--variables-file`](#variables-file) options.<br> |
|
||||
| `NO_COLOR` | When set to a non-empty string, do not colorize output (see [`--no-color`](#no-color) option).<br> |
|
||||
| Variable | Description |
|
||||
|--------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------|
|
||||
| `http_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTP.<br> |
|
||||
| `https_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use for HTTPS.<br> |
|
||||
| `all_proxy [PROTOCOL://]<HOST>[:PORT]` | Sets the proxy server to use if no protocol-specific proxy is set.<br> |
|
||||
| `no_proxy <comma-separated list of hosts>` | List of host names that shouldn't go through any proxy.<br> |
|
||||
| `HURL_name value` | Define variable (name/value) to be used in Hurl templates. This is similar than [`--variable`](#variable) and [`--variables-file`](#variables-file) options.<br> |
|
||||
| `NO_COLOR` | When set to a non-empty string, do not colorize output (see [`--no-color`](#no-color) option).<br> |
|
||||
|
||||
## Exit Codes
|
||||
|
||||
| Value | Description |
|
||||
| --- | --- |
|
||||
| `1` | Failed to parse command-line options.<br> |
|
||||
| `2` | Input File Parsing Error.<br> |
|
||||
| `3` | Runtime error (such as failure to connect to host).<br> |
|
||||
| `4` | Assert Error.<br> |
|
||||
| Value | Description |
|
||||
|-------|---------------------------------------------------------|
|
||||
| `1` | Failed to parse command-line options.<br> |
|
||||
| `2` | Input File Parsing Error.<br> |
|
||||
| `3` | Runtime error (such as failure to connect to host).<br> |
|
||||
| `4` | Assert Error.<br> |
|
||||
|
||||
## WWW
|
||||
|
||||
@ -932,12 +932,12 @@ curl(1) hurlfmt(1)
|
||||
|
||||
### Linux
|
||||
|
||||
Precompiled binary is available at [hurl-2.0.0-x86_64-linux.tar.gz]:
|
||||
Precompiled binary is available at [hurl-2.0.1-x86_64-linux.tar.gz]:
|
||||
|
||||
```shell
|
||||
$ INSTALL_DIR=/tmp
|
||||
$ curl -sL https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-linux.tar.gz | tar xvz -C $INSTALL_DIR
|
||||
$ export PATH=$INSTALL_DIR/hurl-2.0.0:$PATH
|
||||
$ curl -sL https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-linux.tar.gz | tar xvz -C $INSTALL_DIR
|
||||
$ export PATH=$INSTALL_DIR/hurl-2.0.1:$PATH
|
||||
```
|
||||
|
||||
#### Debian / Ubuntu
|
||||
@ -945,8 +945,8 @@ $ export PATH=$INSTALL_DIR/hurl-2.0.0:$PATH
|
||||
For Debian / Ubuntu, Hurl can be installed using a binary .deb file provided in each Hurl release.
|
||||
|
||||
```shell
|
||||
$ curl -LO https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl_2.0.0_amd64.deb
|
||||
$ sudo apt update && apt install ./hurl_2.0.0_amd64.deb
|
||||
$ curl -LO https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl_2.0.1_amd64.deb
|
||||
$ sudo apt update && apt install ./hurl_2.0.1_amd64.deb
|
||||
```
|
||||
|
||||
#### Arch Linux / Manjaro
|
||||
@ -959,7 +959,7 @@ $ sudo apt update && apt install ./hurl_2.0.0_amd64.deb
|
||||
|
||||
### macOS
|
||||
|
||||
Precompiled binary is available at [hurl-2.0.0-x86_64-macos.tar.gz] for x86 CPUs and [hurl-2.0.0-arm64-macos.tar.gz] for ARM CPUS.
|
||||
Precompiled binary is available at [hurl-2.0.1-x86_64-macos.tar.gz] for x86 CPUs and [hurl-2.0.1-arm64-macos.tar.gz] for ARM CPUS.
|
||||
|
||||
#### Homebrew
|
||||
|
||||
@ -983,11 +983,11 @@ $ sudo pkg install hurl
|
||||
|
||||
#### Zip File
|
||||
|
||||
Hurl can be installed from a standalone zip file [hurl-2.0.0-win64.zip]. You will need to update your `PATH` variable.
|
||||
Hurl can be installed from a standalone zip file [hurl-2.0.1-win64.zip]. You will need to update your `PATH` variable.
|
||||
|
||||
#### Installer
|
||||
|
||||
An installer [hurl-2.0.0-win64-installer.exe] is also available.
|
||||
An installer [hurl-2.0.1-win64-installer.exe] is also available.
|
||||
|
||||
#### Chocolatey
|
||||
|
||||
@ -1113,11 +1113,11 @@ Please follow the [contrib on Windows section].
|
||||
[`--test` option]: https://hurl.dev/docs/manual.html#test
|
||||
[Hurl templates]: https://hurl.dev/docs/templates.html
|
||||
[GitHub]: https://github.com/Orange-OpenSource/hurl
|
||||
[hurl-2.0.0-win64.zip]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-win64.zip
|
||||
[hurl-2.0.0-win64-installer.exe]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-win64-installer.exe
|
||||
[hurl-2.0.0-x86_64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-macos.tar.gz
|
||||
[hurl-2.0.0-arm64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-arm64-macos.tar.gz
|
||||
[hurl-2.0.0-x86_64-linux.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.0/hurl-2.0.0-x86_64-linux.tar.gz
|
||||
[hurl-2.0.1-win64.zip]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-win64.zip
|
||||
[hurl-2.0.1-win64-installer.exe]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-win64-installer.exe
|
||||
[hurl-2.0.1-x86_64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-macos.tar.gz
|
||||
[hurl-2.0.1-arm64-macos.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-arm64-macos.tar.gz
|
||||
[hurl-2.0.1-x86_64-linux.tar.gz]: https://github.com/Orange-OpenSource/hurl/releases/download/2.0.1/hurl-2.0.1-x86_64-linux.tar.gz
|
||||
[AUR]: https://wiki.archlinux.org/index.php/Arch_User_Repository
|
||||
[`hurl-bin` package]: https://aur.archlinux.org/packages/hurl-bin/
|
||||
[install]: https://www.rust-lang.org/tools/install
|
||||
|
||||
Loading…
Reference in New Issue
Block a user