refs 829e8ed010
- i18n is used everywhere but only requires shared or external packages, therefore it's a good candidate for living in shared
- this reduces invalid requires across frontend and server, and lets us use it everywhere until we come up with a better option
- Having these as destructured from the same package is hindering refactoring now
- Events should really only ever be used server-side
- i18n should be a shared module for now so it can be used everywhere until we figure out something better
- Having them seperate also allows us to lint them properly
refs https://github.com/TryGhost/Team/issues/588
- This check allows for a on/off switch to be set up on the instance and control limits around sending emails
- An example configuration for such check would look like following in config's hostSettings section, e.g.:
```
"emails": {
"disabled": true,
"error": "Email sending has been temporarily disabled whilst your account is under review."
}
```
refs https://github.com/TryGhost/Team/issues/637
refs https://github.com/TryGhost/Team/issues/591
We need to run migrations which will update the `portal_plans` setting
to use id's rather than names. This migration relies on the
`stripe_prices` table being complete populated. The migration to
populate the `stripe_prices` table was not added as a "normal"
migration because it needs to access the Stripe API over the network.
Any migrations that rely on this are unable to be run in a "normal"
migration as that cannot be sure that the database is in the correct
state.
The `portal_plans` setting migration is therefore run in code, and needs
access to the Settings model in order to modify the database.
closes https://github.com/TryGhost/Team/issues/645
- we did some refactoring in [1] to turn promise chained code into
async/await, but this removed an early `return` from the code
- therefore we'd continue on to further code, which breaks for obscure
reasons that weren't apparent from the error
- this commit adds back a return at the end of the block where we handle
staff API tokens to match the same functionality as before
- this is regression that landed in 4.3.0 and would break staff user
tokens
[1]: b677927322 (diff-bc0bedcac8ec9646d0644c86a91e46f4759bc1b0c2aebac54a2b26ec474c3d15L148-L155)
refs https://github.com/TryGhost/Team/issues/579
The new signup access setting allows site owner to set the type of access level allowed for a member which Portal needs to handle
refs https://github.com/TryGhost/Team/issues/579
`members_signup_access = 'invite'` now forces invite-only mode so both free and paid setups both use the `'all'` setting. To ensure we're properly allowing/disabling free (self signup) signups in the members API we need to update `allowSelfSignup()` to take additional settings into account.
- `true` when Stripe is not connected. There are no paid plans available in this configuration so free signup is always enabled. To disable free signup on a site with no Stripe setup the members signup access should be set to `invite` or `none`.
- `true` when Stripe is configured and free plan is enabled in portal, without it Members API would not send magic link emails to signup requests
- `false` in all other situations such as invite-only and members-disabled signup access modes, or when the free plan has been disabled in portal configuration
refs: bf0823c9a2
refs: ae86254972
- continuing the work of splitting up the theme service into logical components
Themes Service
- The serverside theme service now serves just the API and boot
- It loads the theme and passes it to the theme-engine via the bridge
This achieves the bare minimum goal of removing all the cross requires between server and frontend around themes
There is still a lot more to do to achieve an ideal architecture here as laid out in ae86254972
issue https://github.com/TryGhost/Team/issues/614
- Users who have a password can directly sign-in via oauth
- User who are logged-in get their password disabled
- Users accepting an invitation get their password disabled
- The way we disable password is by setting it to a long random password
refs c873899e49
- as of `bson-objectid` v2.0.0, this library exports the function
to generate an ObjectID directly, and then you need to use `.toHexString()`
to get the 24 character hex string - 6696f27d82
- this commit removes all uses of `.generate()` and replaces with this
change
- This is the beginning of splitting up the theme service into:
- Storage components used by the API (should be a server service)
- Theme engine & rendering components used by the frontend (this new engine service)
- The code to activate a theme which is shared code where the API & frontend need to communicate
- This is needed because currently the frontend theme service is required and used by the API, creating tight coupling.
- In my quest to truly separate the API and frontend, this is one of many battles that needs winning
refs https://github.com/TryGhost/Team/issues/579
- setting `members_signup_access` to `'none'` effectively disables all built-in members functions on the front-end so setting `@labs.members` to `false` allows themes to react accordingly
- `@labs.members` keeps backwards compatibility with pre-4.0 versions where themes were using it to toggle member-related functionality
refs https://github.com/TryGhost/Team/issues/579
Currently the members signup setting is explicitly yes/no to allowing free members signup, with the implication that when set to "no" members is still active but members have to be created via Stripe or the admin API.
This change renames the setting and changes its type to allow more than a binary option.
- migration to create/update the new setting based on the old value
- free signup = "all", no free signup = "invite"; matches the current UI for this setting
- rename setting everywhere it's used/tested against
- modify `getAllowSelfSignup()` used to configure members packages to only return `true` when the new setting is set to `'all'` to match behaviour to the older setting
- update importer to rename the setting when importing from an older Ghost version
refs https://github.com/TryGhost/Team/issues/586
- Passes new Product, Stripe Price and Stripe Product models to members API service
- Allows members service to populate the tables for existing plans and products
https://github.com/TryGhost/Team/issues/599
- When custom integration limit is enabled all webhooks belonging to integrations have to be disabled as well. The result is the webhook would stop working and to discover that a user would need to navigate to Admin UI (this changes is yet to come, see refed issue)
https://github.com/TryGhost/Team/issues/599
- When custom integration limit is enabled all requests from existing integrations should not be accepted. With the exception of internal integrations like backup and scheduler
refs https://github.com/TryGhost/Team/issues/599
- This is a precursor change to tests which verify the hostSettings limits are working correctly
- Bumped limits-service version which allows for multiple calls of loadLimits on the same service instance
refs https://github.com/TryGhost/Team/issues/510
- This version bump includes follwing interface improvements of the limit-service package: passing in errors as a parameter to "loadLimits" and allowing for custom "currentCountQuery" method implementations per limit
refs https://github.com/TryGhost/Team/issues/397
The default newsletter/support email address for a site is currently setup as noreply@DOMAIN , which means for a custom domain setup with www the email address becomes noreply@www.somesite.com which is not the expected behavior normally. This removes the `www` subdomain if present for those email addresses, but doesn't change any other subdomain
refs https://github.com/TryGhost/Team/issues/536
From 4.0, we ensure and require that accent colour is always set. This change removes hardcoded accent color fallbacks to avoid confusion as well as cause accidental fallback that is undesired causing themes to look different
closes https://github.com/TryGhost/Team/issues/570
When site owner/admin updates their newsletter/support email address from settings, they receive an email with confirmation link which on success takes them to Ghost Admin on email settings screen with a toast about success. Since the path for email settings in Ghost Admin changed in v4, the fix updates the redirect link to new Admin settings URL.
refs 4dc413d6a1
- Fixed failing test cases which were designed to check non-major upgrade messages. There's no clear use cases for those, but still worth keeping such case in mind
closes https://github.com/TryGhost/Team/issues/564
refs https://github.com/TryGhost/Ghost/issues/10236
- The notification to upgrade to new 4.0 Ghost version was still visible to users after upgrading the instance to 4.0. This was caused by notification filtering not taking into account 3.x or 4.x versions.
- The fix filters out notifications that detect a major version notification using `x.0 is now available` pattern and compares current version to that major. This should future proof the issue from happening in Ghost 5.0 (but a proper holistic fix is preferable!)
no issue
Comped members were not able to view paid-member content because content gating was only looking for `member.status === 'paid'` which doesn't take into consideration members on a "complimentary" plan.
- added front-end acceptance tests for member access to posts
- updated content-gating check to take comped members into consideration
refs: https://github.com/TryGhost/Team/issues/510
- The current member limit was implemented as a member-specific concept
- The new limit service is much more generic, here we are swapping old for new
- The updated concept here is blocking all publishing, not just email sending, when a site is over its member limit
- To determine that we are publishing a post, we must be in the model layer. The code has been moved to the permissible function which makes sense as this is a permissions error that we are throwing
- I've left the extra check for email retries in, in case there is some loophole here (but we may wish to change it)
refs https://github.com/TryGhost/Team/issues/510
- When the host config was introduced it was incorrectly introduced as host_settings instead of hostSettings
- All other Ghost config uses camelCase, so changing this now before it becomes a problem
- Note: Also removed some rogue return awaits that don't make sense. It's not possible to hit that case, but cleaning up anyway
refs https://github.com/TryGhost/Team/issues/509
- During 3.x we standardised on "lang" instead of "default_locale" for the site setting, which was an assumption based on an earlier change to @site.lang to make <html lang="@site.lang"> read nicer. This was a mistake as the field represents more than "lang" its a "locale". With this changeset we introduce a transition to use "locale" name for the value instead of "lang"
- Adds `@site.locale" value in as well as new 'locale' property in Content API's response
- "lang" will be considered as deprecated starting with API v4 and will be dropped completely with API v5
refs https://github.com/TryGhost/Team/issues/509
- Flipping around key/newKey pair allows to map multiple keys to the same field in the settings
- This becomes handy when there's a need to deprecate a field. For example, we are about to introduce a 'locale' setting which would need to map to 'lang' db key, with current structure it's impossible to have many:1 mapping because it's impossible to have duplicate keys in the JS object ("hash")
refs: https://github.com/TryGhost/Team/issues/510
- added and wired up the new limit service, which is a lazy-loaded service
- this handles the case that there are host limits set in config, and wraps all the logic needed for detecting exceeded limits & throwing limit errors
- expects limits to be set in config under `host_settings.limits`
- supported limits are managed in the limit service, outside of core
refs https://github.com/TryGhost/Ghost/issues/12610
refs https://github.com/mailgun/mailgun-js-boland/blob/v0.22.0/lib/request.js#L285-L333
The mailgun domain is used by the mailgun API to construct the URL for
the API. e.g for a domain of "mg.example.com" the URL for the API
messages would look like:
https://api.mailgun.net/v3/mg.example.com/messages
One weird thing about the mailgun API is that if the path does not map
to an API endpoint, then instead of a 404, we get a 200, with a body of
"Mailgun Magnificent API".
The `mailgun-js` library which we use, expects a JSON response, and will
return a body of undefined if it does not get one.
This all resulted in us trying to read the property `id` of an undefined
`body` variable. The fix here is to reject the containing Promise, if
there is no body. So that the default error handling will kick in.
refs https://github.com/TryGhost/Team/issues/513
- Bumping version as this is now the latest stable API.
- The change might cause this particular side effect (acceptable for major version): if a member requests a login URL when the instance is on 3.x version and site owner upgrades do 4.x before member authenticates through login link, the login will fail and the member will have to request a new login URL.
refs https://github.com/TryGhost/Ghost/pull/12541
refs https://github.com/TryGhost/Ghost/pull/12689
- the analytics job had been switched to create it's own instance of EmailAnalyticsService to avoid requiring logging but the analytics extraction branch was created before this change and wasn't picked up when merging
- pulled `queries` option object into a separate file for re-use
- updated `fetchLatest` job to conform to extracted library interface
closes https://github.com/TryGhost/Team/issues/493
- all functionality except that directly related to Ghost's database and business logic now lives in external packages
- @tryghost/email-analytics-service
- @tryghost/email-analytics-provider-mailgun
refs https://github.com/TryGhost/Ghost/issues/12716
- This change is made to avoid using now deprecated 'v2' API anywhere in the codebase.
- Switching to 'v4' should not cause sideeffects as this parameter is always present within the URL when Admin API is used
