ref https://linear.app/tryghost/issue/ENG-1556/
- added background job queue behind config flags
- when enabled, is only used for the member email analytics updates in
order to speed up the parent job, and take load off of the main process
that is serving requests
The intent here is to decouple certain code paths from the main process where it is unnecessary, or worse, where it's part of the request. Primary use cases are email analytics (particularly the member stats [open rate]) which are not particularly helpful in the period immediately following an email send, while the click traffic and delivered/opened events are.
Related, the email link clicks themselves send off a cascade of events that are quite a burden on the main process currently and are somewhat tied to the request response when they needn't be. We'll be looking to tackle that after some initial testing with the email analytics job.
ref https://linear.app/tryghost/issue/ENG-1254
- when a subscription is canceled automatically by Stripe (e.g. due to
multiple failed payments), we now send a staff notification
- logic before: if a member cancels a sub in Portal, then send a staff
notification
- logic now: if a subscription was active, but is now set to cancel
immediately or at the end of the billing period, then send a staff
notification.
- with that logic change, we now send a cancellation staff notification
when:
1. A member cancels their sub in Portal (existing)
2. A staff member cancels a member sub in Stripe (new)
3. A staff member cancels a member sub in Admin (new)
4. A sub is canceled automatically by Stripe because of multiple failed
payments (new)
- the copy of the staff notification email has also been updated to take
into account 1) manual vs automatic cancellations, and 2) immediate vs
end of billing period cancellations
ref
https://linear.app/tryghost/issue/ENG-1251/support-escalation-re-offers-not-tracking
- Offer Redemptions were not being persisted in the database for
existing free members who upgrade to a paid plan with an offer, which
resulted in inaccurate offer redemption counts. This made it difficult
to assess the performance of an offer.
- Previously, Ghost recorded an offer redemption in the DB in response
to the `SubscriptionCreatedEvent`, under the assumption that the offer
details would be included in this event. This assumption was valid for
brand new members starting a subscription with an offer, but not for
existing free members upgrading to a paid plan with an offer.
- For existing free members, the subscription is first stored in Ghost
in response to the `customer.subscription.created` Stripe webhook. At
this point, the offer/discount is not attached to the subscription, so
the `SubscriptionCreatedEvent` triggers without the offer information,
and the offer redemption is not recorded. After the
`checkout.session.completed` webhook is received (which _does_ include
the offer details), the subscription is updated in Ghost, but the Offer
Redemption is not stored.
- For brand new members, the `customer.subscription.created` webhook
no-ops, because the member and Stripe Customer don't exist yet.
Therefore, the subscription is first created in Ghost in response to the
`checkout.session.completed` webhook, which _does_ include the offer
information, so the offer information is included in the
`SubscriptionCreatedEvent` and the offer redemption is recorded as
expected.
- This change adds a new `OfferRedemptionEvent`, which triggers
either: (1) when a new subscription is created with an offer (as in the
case of a brand new member), or (2) when an existing subscription is
first updated to include an offer (as in the case of an existing free
member upgrading with an offer). The Offer Redemption is then persisted
in the DB in response to the `OfferRedemptionEvent` rather than the
`SubscriptionCreatedEvent`.
refs: https://github.com/TryGhost/Toolbox/issues/188
- some of our older packages used a pattern for linting which missed using test config for linting tests
- we need this to be consistent so that we can add more eslint rules for testing
- two packages also didn't use the lib pattern, which made the lint pattern error - so this was fixed as well
As discussed with the product team we want to enforce kebab-case file names for
all files, with the exception of files which export a single class, in which
case they should be PascalCase and reflect the class which they export.
This will help find classes faster, and should push better naming for them too.
Some files and packages have been excluded from this linting, specifically when
a library or framework depends on the naming of a file for the functionality
e.g. Ember, knex-migrator, adapter-manager
fixes https://github.com/TryGhost/Team/issues/2542
fixes https://github.com/TryGhost/Team/issues/2543
fixes https://github.com/TryGhost/Team/issues/2544
- Hides incomplete subscriptions
- Shows Past Due subscriptions
- Fixed UI issues with 3+ subscriptions
- Fixed missing complimentary subscription when one subscription was
incomplete/inactive
- Fixed sending a paid subscription started email for incomplete
subscriptions. This change also required us to actually send the email
when the incomplete subscription eventually becomes active. So the
introduction of a new `SubscriptionActivatedEvent` made sense/was
required (because sending a SubscriptionCreatedEvent again would cause
other issues).
fixes https://github.com/TryGhost/Team/issues/1952
Adds a new MemberLinkClickEvent event that is fired when a member clicks a link. This code has been added to the `linkClickRepository` because that is the only place that has access to the member model (and the event requires the id and current last seen at value). The LastSeenAtUpdater listens for this event and updates the timestamp if required.
refs https://github.com/TryGhost/Toolbox/issues/387
- There will three distinct verification limits soon. To keep the naming clear "configThreshold" would be too generic/confusing to use.
- Introduced jsdoc descriptions for the "source" parameter, which will be corelating with each new config parameter ("apiTriggerThreshold", "importTriggerThreshold", "adminTriggerThreshold", etc.). This should give a better visibility into parameters we are dealing in this area.
refs https://github.com/TryGhost/Team/issues/1808
refs https://github.com/TryGhost/Team/issues/1809
refs https://github.com/TryGhost/Team/issues/1820
refs https://github.com/TryGhost/Team/issues/1814
### Changes in `member-events` package
- Added MemberCreatedEvent (event, not model)
- Added SubscriptionCreatedEvent (event, not model)
### Added `member-attribution` package (new)
- Added the AttributionBuilder class which is able to convert a url history to an attribution object (exposed as getAttribution on the service itself, which handles the dependencies)
```
[{
"path": "/",
"time": 123
}]
```
to
```
{
"url": "/",
"id": null,
"type": "url"
}
```
- event handler listens for MemberCreatedEvent and SubscriptionCreatedEvent and creates the corresponding models in the database.
### Changes in `members-api` package
- Added urlHistory to `sendMagicLink` endpoint body + convert the urlHistory to an attribution object that is stored in the tokenData of the magic link (sent by Portal in this PR: https://github.com/TryGhost/Portal/pull/256).
- Added urlHistory to `createCheckoutSession` endpoint + convert the urlHistory to attribution keys that are saved in the Stripe Session metadata (sent by Portal in this PR: https://github.com/TryGhost/Portal/pull/256).
- Added attribution data property to member repository's create method (when a member is created)
- Dispatch MemberCreatedEvent with attribution
### Changes in `members-stripe-service` package (`ghost/stripe`)
- Dispatch SubscriptionCreatedEvent in WebhookController on subscription checkout (with attribution from session metadata)
- because of how the npm scripts were set up, we were running the full
Admin integration tests during the unit tests phase of CI
- this commit renames the majority of `test` to `test:unit` in the
package.json files, and aliases `test` to `test:unit`
- special packages like Admin have no-op'd `test:unit` scripts so we
don't end up running its tests
refs https://github.com/TryGhost/Team/issues/1717
- Updates last_commented_at and last_seen_at (only once a day)
- Used the LastSeenAtUpdater, so we can combine updating last_commented_at and last_seen_at in one query + used same pattern
- Updated comments service to await emails in order to make E2E tests more stable (as we don't have any method to await emails and test emails otherwise). This removed the email sending logic from the `onCreated` hook of the model.
refs https://github.com/TryGhost/Toolbox/issues/354
- these READMEs were migrated over from when each package was in a
different repo
- they also assume you're going to be publishing the packages because it
mentions install instructions
- only a few of them contain custom content
- this commit deletes the majority of these files because they're now
not useful
- any that contained other instructions have been cut down
refs https://github.com/TryGhost/Toolbox/issues/354
- these repository links made sense when they were in different repos
and published to NPM but we don't publish these packages any more
- this commit deletes those keys from the files
- these were copied over during the monorepo conversion but we're not
going to be publishing these packages so the top-level LICENSE file
covers all packages here
- these packages are split apart for local development, but will be
bundled into Ghost when publishing
- therefore, these packages won't be published so we are resetting the
versions to make them cleaner
refs https://github.com/TryGhost/Toolbox/issues/203
- without `--all`, c8 ignores files that should be included in the
coverage score but aren't used in tests
- this means we have artificially high scores in places where this isn't
used
- this commit adds `--all` where previously missing
- where this fails `--check-coverage`, that has been removed for now
