closes https://github.com/TryGhost/Team/issues/2275
When deleting a member, after confirming deletion another "unsaved changes" modal popped up. From that point, if you clicked to stay you remained on the member screen with stale data (the member was still deleted) resulting in further errors when any attempt to make changes was made.
- prevented the unsaved changes check running for a deleted member because it would always return `true` in that case
- ensured the data setup for the unsaved changes check still occurs when a member is accessed directly via the URL
- previously it was skipped because the data setup only occurred inside `fetchMemberTask` but that isn't called when the route already loaded the model via it's `model()` hook
refs https://github.com/TryGhost/Team/issues/2327
- wires email debug screen with real data from API
- fetches email batch data for showing all batches along with those errored
- fetches all recipient failures - temporary and permanent
- shows email settings that was used for sending out the email
closesTryGhost/Team#2313
- Added Sent event to Post analytics and Members feed. Now post can be
Sent or Received or Bounced.
- Excluded Delivered event from Sent filter on backend.
refs: https://github.com/TryGhost/Team/issues/1121
- We've decided on one preferred message for unexpected errors
- We want to use this everywhere where we don't know what to display
- We now have a GENERIC_ERROR_MESSAGE constant that we should use
no issue
- changes were made to the default editor to adjust the header nav options when accessed from an analytics page but they weren't copied over to the duplicate editor route/controller we use for the in-development lexical editor
refs https://github.com/TryGhost/Team/issues/2233
**Problem**
When a user clicks an offer link that has an archived tier, the site
blocks and you are no longer able to scroll. This is because the product
for that offer can't be found. This has been fixed by updating the
`isActiveOffer` helper to also check for the existence of the
corresponding tier.
**Solution**
- You no longer are able to create new offers if there are no active
tiers
- A custom message is shown that instructs the user to create a new tier
if there are not active tiers on the offers page
- Improved detection of changes in tiers by correctly reloading the
members utils service after tier changes
- Portal redirects to the homepage for offers with an archived tier
(same behaviour as invalid offers)
- Offers of an archived tier are no longer visible in the dashboard
fixes https://github.com/TryGhost/Team/issues/2134
fixes https://github.com/TryGhost/Team/issues/2133
- Moved all filters to separate files to make the filter component a lot more readable and easier to maintain.
- Removed long switch style code from hbs for filter column values
- Filters for features that are disabled (such as open tracking, click tracking or member attribution) are now hidden when they are disabled
- The open rate column in the members table is now only visible if open tracking is enabled
refs https://github.com/TryGhost/Team/issues/2110
- dynamically defined properties on the config service did not have
autotracking set up properly if they were accessed in any way before the
property was defined, this caused problems in a number of areas because
we have both "unauthed" and "authed" sets of config and when not logged
in we had parts of the app checking for authed config properties that
don't exist until after sign-in and subsequent config re-fetch
- renamed `config` service to `configManager` and updated to only
contain methods for fetching config data
- added a `config` instance initializer that sets up a `TrackedObject`
instance with some custom properties/methods and registers it on
`config:main`
- uses application instance initializer rather than a standard
initializer because standard initializers are only called once when
setting up the test suite so we'd end up with config leaking across
tests
- added an `@inject` decorator that when used takes the property name
and injects whatever is registered at `${propertyName}:main`, this
allows us to use dependency injection for any object rather than just
services or controllers
- using `application.inject()` in the initializer was initially used but
that only works for objects that extend from `EmberObject`, the
injections weren't available in native-class glimmer components so this
decorator keeps the injection syntax consistent
- swapped all `@service config` uses to `@inject config`
refs https://github.com/TryGhost/Ghost/issues/14101
- migrated to native class syntax and glimmer component patterns
- removed use of jQuery, the workaround to trigger change events no longer appears necessary
closes: https://github.com/TryGhost/Ghost/issues/15505
When starting Ghost with a missing active theme, the design settings screen and change theme screen both end up in a broken state with the user unable to select a new theme as the active one.
The design screen has no default (or blank) slate, and so shows a preview of an empty theme.
- First added a new default screen to serve as a placeholder for when the state contains no active theme.
- Added a check for when there was no active theme, then redirects the user to the default screen .
The change theme screen wants to set an active property on the theme that should be active in the theme list.
- Added a check to see whether there is an active theme set.
- If there isn't one, don't bother trying to add the active property.
fixes https://github.com/TryGhost/Team/issues/2175
- New event type `aggregated_click_event` that is disabled by default in all the existing activity feeds
- This returns click events, but only the first click events for each member/post combination.
- It includes the total count of unique link clicks for that member on that post combination
- Had to resort to some custom knex queries to make this work easily
- Requires `@tryghost/bookshelf-pagination@0.1.31`, included in `@tryghost/bookshelf-plugins@0.6.1` (this fixes an issue with custom selects breaking the total count query of pages)
- Went a bit overboard with the pagination tests to cover as much unknown edge cases as possible
refs https://github.com/TryGhost/Team/issues/2168
- wires new source tracking setting for members to UI
- splits the new analytics page settings to its own component, cleaned up the files and wired up the settings upstream
no issue
When reloading the posts page, the labs settings wouldn't work. The 'feature' service labs property would try to JSON.parse an undefined labs setting (settings.labs === undefined) because settings wasn't loaded yet. After loading the settings, it wouldn't update because Ember's 'computed' decorator isn't able to watch this.
This was all caused by trying to access the emailAnalytics feature in the controller's constructor (this feature doesn't exist any longer). Removing this fixed the issue.
We probably need some protection for this in the future.
fixes https://github.com/TryGhost/Team/issues/2137
For the analytics page, we need the sent events to show up immediately
after sending an email. Otherwise we need to wait for emails to be
marked as received (which takes too long) before being able to show them
on the analytics page.
This adds the email_sent_event, which is hidden by default everywhere
and used on the analytics page.
fixes: https://github.com/TryGhost/Ghost/issues/15291
- An attempt to improve re-authenticate modal toggle - show re-authenticate modal every time user save (ctrl/cmd + s)
- An attempt to fix redirection when user re-login on different tab. Prevent redirection to sign-in page since the user already logged in on another tab.
- Re-enable `editor` test on `authentication-test.js`
fixes https://github.com/TryGhost/Team/issues/2112
- Removed a bit of duplicate code across templates and components that was used to handle filters
- Updated filter objects to contain information about the filter
- Added resource filters that are able to select a single resource, which can be used in columns
- Filters can now define columns by themselves. Not all columns already make use of this functionality, but we can move those over later (cleanup: https://github.com/TryGhost/Team/issues/2133)
- The filter definitions became quite long. We should move them to separate files in the future: https://github.com/TryGhost/Team/issues/2134
- Filters can now have custom NQL parsing
- Improved support for parsing recursive or grouped NQL queries
- Added support for filtering members by feedback
no issue
Improve the route communication between Ghost Admin and Ghost Explore to
reflect route changes in the URL and correctly navigate to Explore sub
routes
no issue
- the `memberRecord` getter on the members activity controller was
returning the direct result of `store.findRecord()` which in reality is
a `PromiseObject` that is a type of proxy. Although templates handle
this OK, any JS code using the object needs to know that it's not a
typical type of object and has to use `.get()` for all property access
to avoid errors
- switched `memberRecord` from a getter to a resource so we have more
control over the returned object and loading lifecycle
- added a `MemberFetcher` resource class that awaits the result of the
store find and only then sets the value meaning we always have a fully
resolved model object
- being a resource the fetch will only occur when the `member` id
property changes, unlike the getter which performed the fetch every time
it was accessed
closes: https://github.com/TryGhost/Ghost/issues/15470
- When multiple browser tabs are open, each manipulate a different copy of ember data model, changes to the model in one tab are not reflected in the model of the other tab.
- When updating some settings, all current settings were sent to the API.
- As a result, when updating two different categories of settings (navigation/code inspection) in different tabs, the second update was overriding the first one.
- From a user perspective, this is not a natural behaviour. Only settings visible on-screen when clicking save should be modified.
Co-authored-by: Kevin Ansfield <kevin@lookingsideways.co.uk>
refs https://github.com/TryGhost/Ghost/issues/14101
- migrated to full native class syntax
- swapped use of `<GhTextInput>` in favor of native `<input>` and removed use of `{{action}}` in associated template
refs https://github.com/TryGhost/Ghost/issues/14101
- migrated to full native class syntax
- removed loading of snippets as they are not needed on post lists (they are needed on the editor screen which does it's own loading)
- removed `access` query param definition leftover from earlier development
- removed use of `{{action}}` in associated templates
no issue
- the `ella-sparse-array` dependency used for the sparsely populated list on the members screen creates ProxyObjects that wrap the underlying member model instances meaning the forced use of `.get()` and `.set()` required by ProxyObject was leaking through to other areas of the app causing a mismatch in code patterns
- moved the loading state for each member into a separate component and put the loading conditional directly inside the `{{#each members}}` block so that we can pass the real model instance through to components via `{{member.content}}` rather than passing the ProxyObject wrapper, avoiding unexpected errors when not using `.get()` and `.set()` on member arguments
no issue
The `config` service has been a source of confusion when writing with modern Ember patterns because it's use of the deprecated `ProxyMixin` forced all property access/setting to go via `.get()` and `.set()` whereas the rest of the system has mostly (there are a few other uses of ProxyObjects remaining) eliminated the use of the non-native get/set methods.
- removed use of `ProxyMixin` in the `config` service by grabbing the API response after fetching and using `Object.defineProperty()` to add native getters/setters that pass through to a tracked object holding the API response data. Ember's autotracking automatically works across the native getters/setters so we can then use the service as if it was any other native object
- updated all code to use `config.{attrName}` directly for getting/setting instead of `.get()` and `.set()`
- removed unnecessary async around `config.availableTimezones` which wasn't making any async calls
no issue
The `settings` service has been a source of confusion when writing with modern Ember patterns because it's use of the deprecated `ProxyMixin` forced all property access/setting to go via `.get()` and `.set()` whereas the rest of the system has mostly (there are a few other uses of ProxyObjects remaining) eliminated the use of the non-native get/set methods.
- removed use of `ProxyMixin` in the `settings` service by grabbing the attributes off the setting model after fetching and using `Object.defineProperty()` to add native getters/setters that pass through to the model's getters/setters. Ember's autotracking automatically works across the native getters/setters so we can then use the service as if it was any other native object
- updated all code to use `settings.{attrName}` directly for getting/setting instead of `.get()` and `.set()`
- removed use of observer in the `customViews` service because it was being set up before the native properties had been added on the settings service meaning autotracking wasn't able to set up properly
no issue
- Added Ghost Explore screen behind alpha flag
- Moved existing /explore route to /explore/connect which we'll redirect to for outside requests
- Added iframe communication with Ghost Explore App
refs https://github.com/TryGhost/Ghost/issues/14101
- migrated staff user controller to native class syntax
- removed use of `{{action}}` helper
- moved from custom components to native `<input>` and `<textarea>` for form fields
- added `{{select-on-click}}` modifier to cover the `<GhTextingInput @selectOnClick>` option behaviour for any input element
- added `submitForm()` test helper that finds closest `form` element and trigger's a `submit` event on it simulating <kbd>Enter</kbd> being pressed whilst a field has focus
no issue
- swapped from route actions triggered by shortcuts mixin to explicit `{{on-key}}` actions
- when saved via keyboard, blur any focused element to trigger it's on-blur action and schedule the save to run after those actions
refs https://github.com/TryGhost/Ghost/issues/14101
Twitter/facebook URL validation doesn't follow our typical validation and was duplicated across multiple screens making the controllers unnecessarily complex.
- extracted url input fields and their validation into separate components
- uses tracked scratch values so that the input field values can reset to the saved value on save
- twitter/facebook URL inputs are different to our other inputs because invalid values won't prevent saving, instead they are reset to their previous value on save
- added `this.validate()` call after a successful save in `settings` service so the service and underlying model validations are both in sync (fixes validation error sticking around after saving with invalid twitter/facebook values that have been reset)
no issue
- reset logic was incorrect meaning that if you focused a twitter/facebook URL field then moved to a different field without inputting anything an error would be thrown from trying to use `.match()` on `null`
fixes https://github.com/TryGhost/Team/issues/1992
When you edit a post via the editor, the back button on the top of the editor should go back to the analytics page and the status at the top should be removed.
fixes https://github.com/TryGhost/Team/issues/1993
- Allows filtering members by opened, clicked and received email
- Adds clicked_links filter relation to Member model.
- Adds emails filter relation to Member model.
- Adds opened_emails filter expansion to Member model.
- Updated GhResourceSelect to be able to only show list posts by setting the `type` attribute to `email`.
- Improved code reuse in `filter-value` component.
no issue
Since `ember-moment@10.0` it's not been necessary to use the `ember-cli-moment-shim` package, with `moment` instead being usable directly via `ember-auto-import`. Getting rid of the shim package is necessary for compatibility with `embroider`, Ember's new build tooling.
- dropped `ember-cli-moment-shim` dependency
- added `moment-timezone` dependency and updated all imports to reflect the different package
- worked around `ember-power-calendar` having `ember-cli-moment-shim` as a sub-dependency
- added empty in-repo-addon `ember-power-calendar-moment` to avoid `ember-power-calendar` complaining about a missing package
- added `ember-power-calendar-utils` in-repo-addon that is a copy of `ember-power-calendar-moment` but without the build-time renaming of the tree for better compatibility with embroider
closes https://github.com/TryGhost/Team/issues/1927
This expose the /links endpoint on the Admin API, which is filterable by Post ID.
Co-authored-by: Simon Backx <simon@ghost.org>
no issue
- fixed API returning "Invalid mobiledoc structure" errors when `mobiledoc:null` is sent in the payload alongside `lexical: '{...}'`
- updated Admin's `posts` and `pages` adapters to always add `?formats=mobiledoc,lexical` because the API doesn't return `lexical` by default
- added `lexical` attribute to Admin's Post model
- updated `lexical-editor` controller and related components to work with `lexical` always being a JSON string rather than a parsed object
- updated `<KoenigLexicalEditor>` to pass through the lexical state string as initial state and wired up the `onChange` prop
- the template code had moved to a model in Settings but the controller code
hadn't been moved over so the getters were missing
- this moves all the relevant code from What's New to the About modal
no issue
- relocated the screen-specific modals from `modals/` to `members/modals/` directory as part of a on-going reorganisation of components into screen-specific directories
refs https://github.com/TryGhost/Ghost/issues/14101
- controller was already mostly up-to-date with Octane patterns
- removed unnecessary use of `@computed` and removed `@classic` decorator
no issue
- fixes error that left the confirmation modal in place when deleting a tag by ensuring we return `true` in the task used by the confirm button, if we return the transition object it trips the "failed" state because the `/tags` route aborts and refreshes when transitioning to it
- fixes missing attached posts count in the tag delete confirmation modal by using the correct `tag.count.posts` attribute in the conditional
- fixes missing slugs in the tags list by using the properties on `@tag` rather than expecting a separate `@slug` argument
- replaced the skipped tags acceptance tests with an updated tests that match the recent redesign
refs https://github.com/TryGhost/Toolbox/issues/356
- this commit updates the route to `/settings/history` and moves all the
files to their new name so we can avoid further cleanup down the line
refs. https://github.com/TryGhost/Toolbox/issues/356
- renamed page to “History” now to make it less technical
- moved the history page out to the Advanced section in Settings to increase discoverability
- moved the About section from General settings to a modal because that technical data was not connected to General settings
refs https://github.com/TryGhost/Ghost/issues/14101
refs https://github.com/TryGhost/Team/issues/1734
- use of the helper was generating deprecation warnings when building Admin
- removed the single usage in favor of using `{{perform}}` directly on a controller task property as there was no need to go via the route
- changed naming of task properties to include a `...Task` suffix so it's clear when dealing with a task object
fixes https://github.com/TryGhost/Team/issues/1850
When member attribution is enabled, the signup or conversion columns are shown when filtering on them. This data is not yet available via the API when browsing members. So these columns are now hidden.
fixes https://github.com/TryGhost/Team/issues/1344
fixes https://github.com/TryGhost/Team/issues/1127
This fixes a couple of bugs with the filter menu on the members page in admin:
- When opening the members page, the filters property was passed back from the filter component to the members controller. This caused a bug that the filter columns where not visible on reload.
- Fixed handling invalid filter parameters
- When updating the URL, the members page now properly reloads
- Fixed a bug that 'falsy' values in the NQL filter were removed on reload:
- Filtering on unsubscribed members was gone after a page reload
- Filtering on 0 emails was gone after a page reload
- This is fixed by converting numbers and booleans to strings after parsing the NQL-filter
- Fixed a bug where boolean values didn't match any value in the select menu, causing the default option to be visible
- Filtering members by 'unsubscribed' -> parsed as false (boolean) -> select menu opened -> false value (boolean) didn't match 'false' (string) so the first option was shown instead (subscribed).
- This is also fixed by converting numbers and booleans to strings after parsing the NQL-filter
The way this is currently handled is not great. The parsing happens in the filter component, but should happen on a different layer, maybe in a different helper.
This is tracked here: https://github.com/TryGhost/Team/issues/1849
refs TryGhost/Team#1826
- allows staff users to manage their email alert settings behind the flag
- only owner and admin users are able to toggle their email alerts
