refs TryGhost/Team#2371
- check that members can unsubscribe from newsletters by toggling
preferences in their account settings
- check that member can log out
no issue
- moved logic from `<GhValidationStatusContainer>` to a new `validation-status` modifier
- removes a usage of the `ValidationState` mixin
- migrated uses of the component to a mixin
- paves the way for full removal of the `ValidationState` mixin in later refactors (mixins are deprecated)
- migrated `<GhFormGroup>` to a glimmer component
- swapped the extend of `GhValidationStatusContainer` to usage of the `validation-status` modifier with a template-only component
- updated all `<GhFormGroup>` to use the standard `class=""` instead of `@classNames=""` and `@class=""`
- allows `data-test-*` attributes to be added to uses of `<FormGroup>` to help when complex components are grouped as a form input
refs https://github.com/TryGhost/Team/issues/2110
- dynamically defined properties on the config service did not have
autotracking set up properly if they were accessed in any way before the
property was defined, this caused problems in a number of areas because
we have both "unauthed" and "authed" sets of config and when not logged
in we had parts of the app checking for authed config properties that
don't exist until after sign-in and subsequent config re-fetch
- renamed `config` service to `configManager` and updated to only
contain methods for fetching config data
- added a `config` instance initializer that sets up a `TrackedObject`
instance with some custom properties/methods and registers it on
`config:main`
- uses application instance initializer rather than a standard
initializer because standard initializers are only called once when
setting up the test suite so we'd end up with config leaking across
tests
- added an `@inject` decorator that when used takes the property name
and injects whatever is registered at `${propertyName}:main`, this
allows us to use dependency injection for any object rather than just
services or controllers
- using `application.inject()` in the initializer was initially used but
that only works for objects that extend from `EmberObject`, the
injections weren't available in native-class glimmer components so this
decorator keeps the injection syntax consistent
- swapped all `@service config` uses to `@inject config`
no issue
The `config` service has been a source of confusion when writing with modern Ember patterns because it's use of the deprecated `ProxyMixin` forced all property access/setting to go via `.get()` and `.set()` whereas the rest of the system has mostly (there are a few other uses of ProxyObjects remaining) eliminated the use of the non-native get/set methods.
- removed use of `ProxyMixin` in the `config` service by grabbing the API response after fetching and using `Object.defineProperty()` to add native getters/setters that pass through to a tracked object holding the API response data. Ember's autotracking automatically works across the native getters/setters so we can then use the service as if it was any other native object
- updated all code to use `config.{attrName}` directly for getting/setting instead of `.get()` and `.set()`
- removed unnecessary async around `config.availableTimezones` which wasn't making any async calls
no issue
The `settings` service has been a source of confusion when writing with modern Ember patterns because it's use of the deprecated `ProxyMixin` forced all property access/setting to go via `.get()` and `.set()` whereas the rest of the system has mostly (there are a few other uses of ProxyObjects remaining) eliminated the use of the non-native get/set methods.
- removed use of `ProxyMixin` in the `settings` service by grabbing the attributes off the setting model after fetching and using `Object.defineProperty()` to add native getters/setters that pass through to the model's getters/setters. Ember's autotracking automatically works across the native getters/setters so we can then use the service as if it was any other native object
- updated all code to use `settings.{attrName}` directly for getting/setting instead of `.get()` and `.set()`
- removed use of observer in the `customViews` service because it was being set up before the native properties had been added on the settings service meaning autotracking wasn't able to set up properly
- the template code had moved to a model in Settings but the controller code
hadn't been moved over so the getters were missing
- this moves all the relevant code from What's New to the About modal
no issue
- relocated the screen-specific modals from `modals/` to `members/modals/` directory as part of a on-going reorganisation of components into screen-specific directories
refs. https://github.com/TryGhost/Toolbox/issues/356
- renamed page to “History” now to make it less technical
- moved the history page out to the Advanced section in Settings to increase discoverability
- moved the About section from General settings to a modal because that technical data was not connected to General settings
refs https://github.com/TryGhost/Team/issues/584
- No longer uses a API URL + redirect inside verification emails. This is replaced by a new route (`/settings/members/?verifyEmail=token`) that does the API request and shows a modal.
- Removed update button when changing support email address in the Portal settings
- Added `_meta` attribute to settings (uses same pattern as newsletters model)
- When updating the `membersSupportAddress` setting (via the normal edit endpoint), the `sent_email_verification` meta property will get set by the API. When this new property is present, we'll show a warning that the support address requires verification.
No ref
- Updated modal default state to make it look more clickable
- Updated the Casper upload error state design
- Changed the 'try again' button to directly open the finder rather than only resetting the modal
refs https://github.com/TryGhost/Team/issues/1634
- member count on newsletter may not be immediately updated on saving newsletter
- api returns `opted_in_member_count` in response to adding newsletter which admin cannot use atm
- re-fetches newsletters on save so all newsletters get updated member and post counts
refs https://github.com/TryGhost/Team/issues/1477
- Added default test fixture
- Added tests for validation of newsletter when editing
- Added tests for opening and closing tabs
refs https://github.com/TryGhost/Team/issues/1621
- the old publish menu will be fully deleted soon
- removing it from the preview modal is the minimal "fix" for interoperability with the new publish flow
- pre-cursor to tighter preview/publish modal integration
refs: https://github.com/TryGhost/Team/issues/1145
- this should allow us to remove the /products endpoint in v5
It avoids:
- `kg-product-card`, that really is meant to say product
- `product-cadence` on offers
Co-authored-by: Rishabh <zrishabhgarg@gmail.com>
refs https://github.com/TryGhost/Team/issues/1583
- When adding a newsletter, check the limits (both via button and route)
- When unarchiving a newsletter, check the limits
- Bumped `@tryghost/limit-service` package, required to make limit checking work for newsletter
- Added the `getNewslettersCount` query to the `limit` service
refs https://github.com/TryGhost/Team/issues/1576
This change was required to avoid showing 'all members' or 'all paid members', when it was in fact 'all paid subscribers of newsletter X'. The newsletter name is only shown when multiple newsletters are activated on a site.
refs https://github.com/TryGhost/Team/issues/1576
- Passes the selected newsletter to the recipient selector
- Added a `recipientFilter` getter to the newsletter model to make changes easier in the future
- Updates the `fullRecipientFilter` in the new publishing flow to use the newsletter's recipientFilter
- Already takes future paid only newsletters into account
- The counts in the status message after publishing is not updated yet (requires https://github.com/TryGhost/Team/issues/1569)
- The counts in the scheduled notification is not updated yet (requires https://github.com/TryGhost/Team/issues/1569)
no issue
We still had some old components and templates from the `members-email` settings that were only were used when the (now GA) `multipleNewsletters` flag was disabled. I’ve removed them and renamed all routes and components from `members-email` and `members-email-labs` to just `newsletters` because it was sometimes hard to understand if a given components was still used or not when fixing issues.
refs https://github.com/TryGhost/Toolbox/issues/308
- this endpoint is being switched to return a 204 with no body upon success
- if we don't change this code, the button will get stuck in a red Retry
state because it reads the `undefined` body and thinks it's an error
- this commit makes sure we return true if the POST is successful
refs https://github.com/TryGhost/Toolbox/issues/308
- we have a pattern of using plurals for endpoints but `email_preview`
was implemented without it
- in v5, we're fixing that so we need to update Admin to take that into
account
refs https://github.com/TryGhost/Team/issues/1477
- Very basic test only
- Includes some extra test attributes in the components
- Commented out a test that was not yet fininished
refs https://github.com/TryGhost/Team/issues/1542
- moved publish-flow modal into `components/editor-labs/modals/publish-flow` as we have enough editor-related components to keep them in one place
- updated publish flow design to use expanding blocks in place of dropdowns
- added `openSection` property in publish-flow modal and associated action for toggling sections
- moved "publish at" option into a separate component to keep publish-flow modal cleaner (keeps option-specific actions out of the main modal component)
- used `{{liquid-if}}` to animate the expanding blocks
- added schedule time properties to `PublishOptions`
- kept "is scheduled" and "scheduled at" separate so it's possible to keep the selected schedule time across selecting/deselecting the option to schedule
- ensures schedule date is kept to the minimum 5-minute in the future across option changes
- updated publish-management to reset the scheduled option to "Right now" when the publish-flow modal is opened if a schedule time was previously set but is now in the past
no issue
The full edit newsletter form with all the settings, design options, and preview felt quite overwhelming when the only piece of data that's required to create a newsletter is the name.
- re-organised the newsletter modal components by renaming `modals/edit-newlsetter` to `modals/newsletters` to better represent the full suite of modals that are used in newsletter management
- added a `modals/newsletters/new` component containing a minimal form with name/description/opt-in-existing fields
- switched the `new-newsletter` route to open the new modal rather than the previous dual-purpose edit modal
- moved message about newsletter creation into the create modal and dropped the separate create confirmation modal
- dropped unnecessary unsaved-changes confirmation
- removed the now-unused opt-in-existing behaviour from the edit newsletter modal
Co-authored-by: Peter Zimon <peter.zimon@gmail.com>
