- this is generally an anti-pattern in tests and leads to flaky
behaviour when tests are ran on different machines/loads
- this is currently unused so it is an easy removal
fixes https://github.com/TryGhost/Team/issues/2560
When an email fails, and you reschedule the post, the error dialog was
shown (from the previous try). The retry button on that page allowed you
to retry sending the email immediately, which could be very confusing.
- The email error dialog is no longer shown for scheduled emails
- The email status is no longer polled for scheduled emails
- Retrying an email is not possible via the API if the post status is
not published or sent
- Added some extra snapshot tests
- When retrying an email, we immediately update the email status to
'pending' to have a better API response (instead of still returning
failed).
- Disabled email sending retrying in development (otherwise very hard to
test failed emails if it takes 10 mins before it gives up automatic
retrying)
fixes https://github.com/TryGhost/Team/issues/2666
- Somehow occurrences of `&map_` got replaced with `↦`
- Disables escaping &, ', " and other HTML characters when not needed
(escaping is already handled by mobiledoc/lexical)
- Bumps unit test coverage of link replacer to 100%
no issue
- Nock doesn't support multiple calls to enableNetConnect -> only the last one counts. This fixes that issue.
- Some tests interacted directly with nock instead of using the mockManager to restore everything.
fixes https://github.com/TryGhost/Team/issues/2611
The old email flow is no longer used since we introduced the email stability flow. This commit removes the related code and tests. The general test coverage decreased a bit as a result, because the old email flow probably had a high test coverage. The new flow is in separate packages, so it couldn't contribute to a higher test coverage (but it does have 100% unit test coverage).
fixes https://github.com/TryGhost/Team/issues/2683
When sending a newsletter with a replacement that has a fallback, the
replacement only happens in the HTML version of the newsletter. The
plaintext version isn't replaced.
This commit fixes the issue and adds some tests to make sure it doesn't
happen again.
The cause of the issue was that we used the original matched Regex text
to replace. But that was calculated on the HTML version, so double
quotes were encoded. This change updates the generated 'token' regex to
also match on both a double quote as the escaped double quote.
refs https://github.com/TryGhost/Team/issues/2667
Some tests still accessed the internet. Now network access is disabled
by default. This change also introduces two helper methods related to
networking (mocking Slack and Mailgun).
This fixes two unreliable tests:
- Staff service was accessing a Slack test API -> timeout possible
- MentionSendingService was trying to send webmentions for every post
publish/change -> possible timeouts and job issues
refs https://github.com/TryGhost/Toolbox/issues/523
- The test is useful for future iterations of the response format and as a quick reference on which parameters the media inlining endpoint accepts.
refs: https://github.com/TryGhost/Toolbox/issues/389
This removes many error logs when the end-to-end test suite is run with the log-level set to error. Many errors are intentional, so the resolution is typically to stub the error log function and assert that it would have been called.
refs: https://github.com/TryGhost/Toolbox/issues/389
The newsletter fixtures no longer errors when accessing the test image, and tests which intentionally error now stub the logging call
fixes https://github.com/TryGhost/Ghost/issues/16301
Previously, audio/x-m4a was allowed but not audio/mp4. This meant
uploads of m4a files failed in some cases e.g. Firefox on Windows.
no refs
-spam prevention test was causing subsequent tests to fail randomly
-moving to the end ensures (for now) we don't interrupt other tests
-seems to be an issue with awaiting the jobservice which do concurrent
Refs TryGhost/Team#2459
-upgraded got from v9.6.0 to v11.8.6 to support following redirects (and
other fixes)
-got v12+ requires ESM, so we do not want to upgrade further at this
time
-required changes to a few libraries that use externalRequests
-mention discovery service tests updated to test for follow redirects
refs https://github.com/TryGhost/Team/issues/2550
By using cheerio to parse the HTML we can correctly look for elements
which use the target URL as the href attribute, rather than doing a
plaintext search. This closer to what the spec says.
[Added initial mentions-jobs
service](3656190114)
This is the result of running `cp -r jobs mentions-jobs` in the services
directory.
[Waited for mentions-jobs queue before
shutdown](2bb1a12a89)
This matches the functionality of the existing jobs service where we
will wait
for jobs to complete before closing the process.
[Used mentions-jobs service in the mentions
service](4e4f9fdd00)
This ensures that any delays in the mentions jobs queue does not effect
other
parts of the application.
fixes https://github.com/TryGhost/Team/issues/2433
- Moved all outbound link tagging code to separate OutboundLinkTagger
- Because a site can easily enable/disable this feature, we don't store
the ?refs in the HTML but add them on the fly for now in the Content
API.
closes https://github.com/TryGhost/Team/issues/2551
Rather than blindly passing all data through the API we explicitly include each
new property. This allows us to make changes to the core entities without
affecting the API. The verified property is being added now to give design the
ability to display these mentions differently.
We also needed to include the verified property in the return value of toJSON,
this was missed as part of the original entity changes
closes https://github.com/TryGhost/Team/issues/2552
We send a Webmention for the same URL twice, but change the contents
of the source document, and we check that the source metadata is
updated appropriately.
We should consider extending all of these tests to include featured
images and logos etc...
closes https://github.com/TryGhost/Team/issues/2547
Changed the configuration for testing to be a bit more strict, by slowing down the amount of requests it can handle to give CI enough time to kick in the rate limiter. Before this, CI simply wasn't hitting the API fast enough to trigger the rate limiter.
Co-authored-by: Ronald Langeveld <hi@ronaldlangeveld.com>
closes https://github.com/TryGhost/Team/issues/2526
- Mention emails can now be toggled inside staff user' profiles, if they
have the webmention flag enabled on their Ghost site.
- Removed the flag dedicated to webmention email notifications and is
now handled by the `webmention` flag.
- Does not send email notification if `webmention` flag is not enabled.
- Updated tests.
---------
Co-authored-by: Fabien "egg" O'Carroll <fabien@allou.is>
refs https://github.com/TryGhost/Team/issues/2526
- created a migration for a new boolean column in users that would
determine if the staff user gets an email when the publication receive a
new mention.
closes https://github.com/TryGhost/Team/issues/2419
- adds a rate limiter implementation to the mentions receiving
endpoint.
- Current configuration is `{"minWait": 10,
"maxWait": 100,
"lifetime": 1000,
"freeRetries": 100}` which is still very open and almost unrestricted.
- currently makes use of database storage to track the limits, but can be relatively easily swapped out to something eg Redis should we find this endpoint getting hit too often and maliciously.
refs https://github.com/TryGhost/Team/issues/2503
This is in the MentionController atm as it's considered a presentation
concern. We might want to consider moving this into the MentionsAPI in
future so that we can simplify the controller and even remove it
completely in favour of putting the data-mapping in the endpoint definition.
fixes https://github.com/TryGhost/Team/issues/481
This change fixes an issue when multiple images with the same name are
uploaded in parallel. The current system does not guarantee that the
original filename is stored under NAME+`_o`, because the upload for the
original file and the resized file are happening in parallel.
Solution:
- Wait for the storage of the resized image (= the image without the _o
suffix) before storing the original file.
- When that is stored, use the generated file name of the stored image
to generate the filename with the _o suffix. This way, it will always
match and we don't risk both files to have a different number suffix.
We'll also set the `targetDir` argument when saving the file, to avoid
storing the original file in a different directory (when uploading a
file around midnight both files could be stored in 2023/01 and 2023/02).
Some extra optimisations needed with this fix:
- Previously when uploading image.jpg, while it already exists, it would
store two filenames on e.g., `image-3.jpg` and `image_o-3.jpg`. Note the
weird positioning of `_o`. This probably caused bugs when uploading
files named `image-3.jpg`, which would store the original in
`image-3_o.jpg`, but this original would never be used by the
handle-image-sizes middleware (it would look for `image_o-3.jpg`). This
fix would solve this weird naming issue, and make it more consistent.
But we need to make sure our middlewares (including handle-image-sizes)
will be able to handle both file locations to remain compatible with the
old format. This isn't additional work, because it would fix the old bug
too.
- Prevent uploading files that end with `_o`, e.g. by automatically
stripping that suffix from uploaded files. To prevent collisions.
Advantage(s):
- We keep the original file name, which is better for SEO.
- No changes required to the storage adapters.
Downside(s):
- The storage of both files will nog happen parallel any longer. But I
expect the performance implications to be minimal.
- Changes to the routing: normalize middleware is removed
no issue
There are a couple of issues with resetting the Ghost instance between
E2E test files:
These issues came to the surface because of new tests written in
https://github.com/TryGhost/Ghost/pull/16117
**1. configUtils.restore does not work correctly**
`config.reset()` is a callback based method. On top of that, it doesn't
really work reliably (https://github.com/indexzero/nconf/issues/93)
What kinda happens, is that you first call `config.reset` but
immediately after you correcty reset the config using the `config.set`
calls afterwards. But since `config.reset` is async, that reset will
happen after all those sets, and the end result is that it isn't reset
correctly.
This mainly caused issues in the new updated images tests, which were
updating the config `imageOptimization.contentImageSizes`, which is a
deeply nested config value. Maybe some references to objects are reused
in nconf that cause this issue?
Wrapping `config.reset()` in a promise does fix the issue.
**2. Adapters cache not reset between tests**
At the start of each test, we set `paths:contentPath` to a nice new
temporary directory. But if a previous test already requests a
localStorage adapter, that adapter would have been created and in the
constructor `paths:contentPath` would have been passed. That same
instance will be reused in the next test run. So it won't read the new
config again. To fix this, we need to reset the adapter instances
between E2E tests.
How was this visible? Test uploads were stored in the actual git
repository, and not in a temporary directory. When writing the new image
upload tests, this also resulted in unreliable test runs because some
image names were already taken (from previous test runs).
**3. Old 2E2 test Ghost server not stopped**
Sometimes we still need access to the frontend test server using
`getAgentsWithFrontend`. But that does start a new Ghost server which is
actually listening for HTTP traffic. This could result in a fatal error
in tests because the port is already in use. The issue is that old E2E
tests also start a HTTP server, but they don't stop the server. When you
used the old `startGhost` util, it would check if a server was already
running and stop it first. The new `getAgentsWithFrontend` now also has
the same functionality to fix that issue.
refs https://github.com/TryGhost/Team/issues/2419
We use a job queue to ensure that webmentions can be processed outside of
the request/response cycle, but still finish executing if the processed is closed.
With this we're able to update the e2e tests to await the processing of the mention
rather than sleepign for arbitrary lengths of time, and we've reintroduced the tests
removed previously
- aa14207b69
- 48e9393159
closes https://github.com/TryGhost/Team/issues/2429
- sends email notifications to staff users when their site receives a Webmention.
- currently behind a flag, that can be toggled in the labs settings.
This test is failing because the `sleep` isn't long enough. Removing this test
until we've refactored to use the jobs service, at which point we can remove the
sleep and wait for the job to be complete.
fixes https://github.com/TryGhost/Team/issues/2432
Adds outbound_link_tagging setting (enabled by default and behind
feature flag). If the feature flag is enabled, and the setting is
disabled, we won't add ?ref to links in emails.
This includes new E2E tests for email click tracking, which were also
extended to check outbound link tagging (for both MEGA and the new email
stability flow).
Also fixes a test fixture for the comments_enabled setting.
fixes https://github.com/TryGhost/Team/issues/2461
- Ignores 'edited' links when there is only one second differences.
- Make sure we don't set updatedAt when linking a post to a redirect
refs acf0baa8c7
Due to the bump in express-test, we now handle string bodies 'properly'. So they now pass all the Express middlewares. In the past this failing test did not really pass by the bodyParser.raw middleware,
so the content-type check on the `bodyParser.raw({type: 'application/json'})` middleware was not executed. Now it is, and the test fails because the content-type header was not set to application/json.
refs https://github.com/TryGhost/Team/issues/2400
- we've deemed it useful to start to return `Content-Version` for all
API requests, because it becomes useful to know which version of Ghost
a response has come from in logs
- this should also help us detect Admin<->Ghost API mismatches, which
was the cause of a bug recently (ref'd issue)
refs https://github.com/TryGhost/Toolbox/issues/499
- Outgoing emails have been a weak point of Ghost's stability recently. The concept of "emailMockReceiver" similarly to "webhookMockReceiver", allows to test side-effects like outgoing emails.
- This is a first iteration which should lay groundwork for testing all outgoing emails in the future
- The change adds a new concept of "email mock receiver" which is very similar to how the "webhook mock receiver" works. The email mock receiver exposes two methods to record and verify snapshots:
- matchHTMLSnapshot - records and verifies only the HTML content of the outgoint email
- matchMetadataSnapshot - records and verifies all the non-HTML properties sent along an email content, e.g.: to address, plaintext, subject, etc.
- What's missing is matching content based on dynamic content like dates, links with JWT tokens, etc.
This introduces the new suppressions feature which will automatically
unsubscribe members from newsletters when their email is added to the
suppression list in Mailgun, this is usually due to emails either
permanently bouncing to the address, or the member making a spam
complaint.
Both Members and Admins are able to see that the email has been added to
the list, and Members are be able to request their email be removed from
the list via Portal.
Overall this feature should improve delivery rates of newsletters and
improve the rating of the domain you're sending from.
closes https://github.com/TryGhost/Team/issues/2011
- Gives publishers the ability to filter members based on which offer they used (redeemed) when they subscribed for a paid membership.
- On the offers page, the redemption count number links to a the members page with the filter already applied making it easy to have insight on which members used the offer / coupon.
refs https://github.com/TryGhost/Team/issues/2393
- During boot and loading the active theme, we now cache the result of
the gscan validation. Cache configuration can happen in
`adapters.cache.gscan`
- We now also return non-fatal errors when activating or adding a theme.
- When the `themeErrorsNotification` feature flag is on, we fetch the
active theme (which includes the validation information) when loading
admin
- If the currently active theme has errors, we show an error
notification that can open the error modal
- Added a new endpoint: `/ghost/api/admin/themes/active/` that returns
the result of the last gscan validation of the active theme. If no cache
is available, it will run a new gscan validation.
- Added new permissions for the active action/endpoint (author, editor,
administrator)
The email_recipient fixtures were using duplicate and mismatched email addresses
rather than having them correctly map to the Members, which is required for testing
email suppressions.
no issue
With the increased usage of DomainEvents, it gets harder to build
reliable tests without having to resort to timeouts. This utility method
allows us to wait for all events to be processed before continuing with
the test.
This change should speed up tests and make them more reliable.
It only adds extra code when running tests and shouldn't impact
production.
fixes https://github.com/TryGhost/Team/issues/2366
refs https://ghost.slack.com/archives/C02G9E68C/p1670232405014209
Probem described in issue.
In the old MEGA flow:
- The `email_verification_required` check is now repeated inside the job
In the new email service flow:
- The `email_verification_required` is now checked (didn't happen
before)
- When generating the email batch recipients, we only include members
that were created before the email was created. That way it is
impossible to avoid limit checks by inserting new members between
creating an email and sending an email.
- We don't need to repeat the check inside the job because of the above
changes
Improved handling of large imports:
- When checking `email_verification_required`, we now also check if the
import threshold is reached (a new method is introduced in
vertificationTrigger specifically for this usage). If it is, we start
the verification progress. This is required for long running imports
that only check the verification threshold at the very end.
- This change increases the concurrency of fastq to 3 (refs
https://ghost.slack.com/archives/C02G9E68C/p1670232405014209). So when
running a long import, it is now possible to send emails without having
to wait for the import. Above change makes sure it is not possible to
get around the verification limits.
Refactoring:
- Removed the need to use `updateVerificationTrigger` by making
thresholds getters instead of fixed variables.
- Improved awaiting of members import job in regression test
fixes https://github.com/TryGhost/Team/issues/1996
**Issue**
Our Magic links are valid for 24 hours. After first usage, the token
lives for a further 10 minutes, so that in the case of email servers or
clients that "visit" links, the token can still be used.
The implementation of the 10 minute window uses setTimeout, meaning if
the process is interrupted, the 10 minute window is ignored completely,
and the token will continue to live for the remainder of it's 24 hour
validity period. To prevent that, the tokens are cleared on boot at the
moment.
**Solution**
To remove the boot clearing logic, we need to make sure the tokens are
only valid for 10 minutes after first use even during restarts.
This commit adds 3 new fields to the SingleUseToken model:
- updated_at: for storing the last time the token was changed/used). Not
really used atm.
- first_used_at: for storing the first time the token was used
- used_count: for storing the number of times the token has been used
Using these fields:
- A token can only be used 3 times
- A token is only valid for 10 minutes after first use, even if the
server restarts in between
- A token is only valid for 24 hours after creation (not changed)
We now also delete expired tokens in a separate job instead of on boot /
in a timeout.
fixes https://github.com/TryGhost/Team/issues/2386
**Issue:**
- When trying to import a member that already exists, and has
'subscribed' set to 'true' in the CSV, the newsletters the member is
subscribed to are reset to the default newsletters.
- When ediging a member with the API and setting `subscribed` to true,
the same happens.
**Cause:**
A faulty check for the `status` property of a newsletter.
Fixed and added a new E2E test.
refs https://github.com/TryGhost/Toolbox/issues/476
- The email verification trigger and host settings related bugs have been a cause of bugs in past releases. The admin client verification source did not have any test coverage in the past.
- The members test suite size is getting out of hand. This test is quite verbose, because of the state it's trying to check.
- In the future we should consider splitting up Member API (and probably other) test suites into smaller pieces.
no issue
- The sleep method has been used in 8 modules reimplementing the same thing over and over again. It's usually a sign of async event processing outside of the request/response loop. It's good to have a single point of implementation for a "hack" like this, so we could track it easier and address the even processing delay in a more optimal way centrally if it ever becomes a bottleneck
fixes https://github.com/TryGhost/Team/issues/2346
- Adds email batch browse endpoint
- Adds email recipient failures browse endpoint
- Adds new fixtures and E2E tests for the new API
- Added support for snapshot tests to have 'nullable' types.
refs https://github.com/TryGhost/Team/issues/2339
- Includes a new pattern in the job manager that allows us to properly
await jobs.
- Added new convenience mocking methods to stub settings
- Tests the main flows for bulk sending:
- Sending in multiple batches
- Sending to multiple segments
- Handling a failed batch and retrying that batch
- Fixes bug in batch generation (ordering not working)
In a different PR I'll add more detailed tests.
closes https://github.com/TryGhost/Team/issues/2324
- It seemed like the "limit" query parameter did not work properly returning multiple entries from the endpoint. In reality the whole query string was ignored because of an error in the "filter" part of the query ^_^
closesTryGhost/Team#2313
- Added Sent event to Post analytics and Members feed. Now post can be
Sent or Received or Bounced.
- Excluded Delivered event from Sent filter on backend.
refs https://github.com/TryGhost/Ghost/security/advisories/GHSA-9gh8-wp53-ccc6
refs https://github.com/TryGhost/Toolbox/issues/465
- Bookshelf relations allows us to edit relational records by default, which was used liberally in the codebase.
- Not having a clear track record of editable relations left the model layer prone to triggering unwanted nested saves and created a vulnerability where members were able to edit newsletter settings.
- With explicit editable relations it's easier to keep track of relations having editable access to related records. Makes the relational data modification pattern safer to use too.
- Anyone running 5.x should update to 5.24.1
Credits: Dave McDaniel and other members of [Cisco Talos](https://talosintelligence.com/vulnerability_reports)
fixes https://github.com/TryGhost/Team/issues/2284
New batch sending flow (still WIP). Logs the sent emails instead of actually sending them. Unit tests are coming in later commits.
refs https://github.com/TryGhost/Team/issues/2280
We are moving away from storing html and plaintext on email and instead will store the email data in source and source_type columns which allows us to store the email in other formats like mobiledoc and lexical. Storing in those formats allows greater flexibility for later html generation
- adds new `source` column that stores `mobiledoc`/`lexical`/`html` data for a newsletter
- adds new `source_type` column that stores one of `mobiledoc`/`lexical`/`html` to identify type of source
fixes https://github.com/TryGhost/Team/issues/2282
Added a new email service package that is used when the email stability
flag is enabled. Currently not yet implemented so will throw an error
for all entry points (if flag enabled).
Removed usage of `labs.isSet.bind` across the code, because that breaks
the stubbing of labs by `mockManager.mockLabsEnabled` and
`mockManager.mockLabsDisabled`. `flag => labs.isSet(flag)` should be
used instead.
All email depending tests now disable the `emailStability` feature flag
to keep the tests passing + make sure we still run all the tests for the
old flow while the email stability package is being built.
refs https://github.com/TryGhost/Team/issues/2268
The approach of using the service to lead email suppression data as
opposed to bookshelf relations allows us to wire things up without
having implemented the database. The getBulkSuppressionData allows us to
do this without much of a DB performance hit.
closes https://github.com/TryGhost/Team/issues/2126
- Cleaned up the following GA flags: `newsletterPaywall`, `freeTrial`, `compExpiring`, `searchHelper`, `emailAlerts`, `fixNewsletterLinks`.
- updated the cover image to be simpler
- made the change in text fixtures as well, just to keep the fixtures in sync
Co-authored-by: Hannah Wolfe <github.erisds@gmail.com>
fixes https://github.com/TryGhost/Team/issues/2085
Don't load relations we don't need anymore for the posts table. And
reload the individual post when we open the analytics page with more
relations that we actually need.
fixes https://github.com/TryGhost/Team/issues/1903
MembersAgent.loginAs sends email, asynchronously via events. Which
conflicts with tests that also test emails. We cannot properly await
these events, so this is currently fixed with a timeout of 200ms. But
this was too random and unreliable.
closes https://github.com/TryGhost/Team/issues/2222
Whilst we were checking for Stripe objects being active, we were not
checking for them existing in Stripe. This adds handling to all read
request to Stripe in the payment link flow, so that we can gracefully
handle deleted objects.
We've also included an automated test which fails without this fix.
We've also improved the query to find Stripe Prices which will result
in less request to the Stripe API to check if it is valid.
refs https://github.com/TryGhost/Ghost/commit/1f300fb781f0
The full customer object was not being passed to the StripeAPI service
when it already exists, this was resulting in inconsistent behaviour when
sending the customerEmail param to the API, causing `invalid_email`
errors to be thrown from Stripe and breaking the checkout.
closes https://github.com/TryGhost/Team/issues/2196
We were incorrectly assuming that all requests would have the
`customerEmail` passed in the body. Instead we were incorrectly
passing `undefined` or `''` as the `customerEmail` property to stripe,
which resulted in a validation error.
We've updated the code to pass `null` in the case of a falsy value,
which the Stripe API handles without error.
closes https://github.com/TryGhost/Team/issues/2195
The issue here is two-fold, and specific to using Offers so was not
caught by any automated tests. First, we were incorrectly comparing
the tier.id to the offer.tier.id - this is because the Tier objects id
property is an instance of ObjectID rather than a string.
Secondly we were passing through the cadence parameter from the
request body, but when using Offers this is not including in the
request, so we must pull the data off of the Offer object instead and
pass that to the payments service.
closes https://github.com/TryGhost/Ghost/issues/15740
The validation function for a Tier description was not returning the
validated value, which meant we were unable to set the Tier
description.
- These tests are very slow, and make the build fail about 2/3 times
- Temporarily skipping until we can fix, as I want to get all our outstanding hacktoberfest PRs merged
fixes https://github.com/TryGhost/Team/issues/2175
- New event type `aggregated_click_event` that is disabled by default in all the existing activity feeds
- This returns click events, but only the first click events for each member/post combination.
- It includes the total count of unique link clicks for that member on that post combination
- Had to resort to some custom knex queries to make this work easily
- Requires `@tryghost/bookshelf-pagination@0.1.31`, included in `@tryghost/bookshelf-plugins@0.6.1` (this fixes an issue with custom selects breaking the total count query of pages)
- Went a bit overboard with the pagination tests to cover as much unknown edge cases as possible
fixes https://github.com/TryGhost/Team/issues/2129
- This changes how the activity feed API parses the filter.
- We now parse the filter early to a MongoDB filter, and split it in two. One of the filters is applied to the pageActions, and the other one is used individually for every event type. We now allow to use grouping and OR's inside the filters because of this change. As long as we don't combine filters on 'type' with other filters inside grouped filters or OR, then it is allowed.
- We make use of mongoTransformer to manually inject a mongo filter without needing to parse it from a string value again (that would make it a lot harder because we would have to convert the splitted filter back to a string and we currently don't have methods for that).
- Added sorting by id for events with the same timestamp (required for reliable pagination)
- Added id to each event (required for pagination)
- Added more tests for filters
- Added test for pagination
- Removed unsued getSubscriptions and getVolume methods
Used new mongo utility methods introduced here: https://github.com/TryGhost/NQL/pull/49
refs https://github.com/TryGhost/Team/issues/2077
- Members and Posts test suites were using a broad tiers property matcher, which is an anti-pattern for snapshot tests. Without more specific snapshots it would be very hard to track down tier-related breaking changes!
- This change is groundwork for a refactor coming in tier usage at API's output serializers
closesTryGhost/Team#2159
- Added column to email table
- Hide the feedback tab on frontend depending on the column value
Co-authored-by: Daniel Lockyer <daniellockyer@fastmail.com>
fixes https://github.com/TryGhost/Team/issues/2137
For the analytics page, we need the sent events to show up immediately
after sending an email. Otherwise we need to wait for emails to be
marked as received (which takes too long) before being able to show them
on the analytics page.
This adds the email_sent_event, which is hidden by default everywhere
and used on the analytics page.
refs https://github.com/TryGhost/Team/issues/2116
- allows site owners to edit a link in a post that has already been sent out, fixing any typos or other mistakes
- resets click counter for the edited link back to 0 so site owners can see the clicks on new link, doesn't change the overall click count
refs https://github.com/TryGhost/Team/issues/2135
The email link redirects on Pro are cached as 302 redirects in Varnish, so we're missing further clicks after the first one for each member, until the cache is invalidated. This change invalidates cache on link edits to ensure that we correctly redirect members to updated link everytime
fixes https://github.com/TryGhost/Team/issues/2090
- This changes how sentiment is exposed in the API. Now it is exposed as a `sentiment` relation, directly on the model (no longer in counts). Internally we still use `count.sentiment`.
- Content API users (and themes) can include the 'sentiment' relation and order by sentiment.
- Updated Admin to use sentiment instead of count.sentiment
fixes https://github.com/TryGhost/Team/issues/2091
fixes https://github.com/TryGhost/Team/issues/2089
- Added new fixtures to make testing easier for the activity feed
- Improved E2E test coverage of activity feed with separate test file
- Added data.post_id filter to enable filtering by events related to a
given post
- Fixed return types in JSDoc of test agents (TypeScript interprets
these as `typeof Agent` if we don't add `InstanceType<Agent>`)
- Added total pagination metadata to activity feed API (to allow a basic
type of pagination using filters)
fixes https://github.com/TryGhost/Team/issues/2084
- When audience feedback is enabled, we use a single 'conversions' count instead of having separate ones for signups and paid conversions.
- The analytics component is separated so we can change it without breaking the existing page.
refs https://github.com/TryGhost/Team/issues/1765
In order to better handle deleted objects in Stripe we want to decouple
Members from Stripe.
These changes allow us to have the Tier concept completely independent
of the Stripe tables, such that the Stripe data can be generated as/when
it's needed - which will help to protect against missing data.
closes: https://github.com/TryGhost/Ghost/issues/14973
- When fetching content using a non-standard charset, characters were notproperly decoded to utf-8 resulting in mangled text in the editor -> Detect charset and use iconv to decode the page text
- When requesting a non bookmark card, if no oembed data could be foundand we fallback to bookmark, a second network request to fetch the content was issued. This seemed unnecessary -> refactored to avoid that
fixes https://github.com/TryGhost/Team/issues/2054
This change adds the sentiment and positive_feedback counts to the posts models. This change isn't really ideal because there are some problems here:
- sentiment isn't really a count
- we don't need to include the sentiment and positive_feedback as a default for posts (but the same is true for attribution)
It would make sense to move this to separate endpoints that only fetch the analytics for a given post when the analytics page is opened. But for our initial skateboard version of audience feedback this should be a good start to already see the data.
refs https://github.com/TryGhost/Team/issues/2047
- We anticipate upcoming changes in the PUT /members/:id/subscriptions/:subscription_id endpoint , so covered it with a snapshot test to track the differences more precisely.
- Note, the test case contains a more explicit outgoing HTTP request mocking.
fixes https://github.com/TryGhost/Ghost/issues/14508
This change requires the frontend to send an explicit `emailType` when sending a magic link. We default to `subscribe` (`signin` for invite only sites) for now to remain compatible with the existing behaviour.
**Problem:**
When a member tries to login and that member doesn't exist, we created a new member in the past.
- This caused the creation of duplicate accounts when members were guessing the email address they used.
- This caused the creation of new accounts when using an old impersonation token, login link or email change link that was sent before member deletion.
**Fixed:**
- Trying to login with an email address that doesn't exist will throw an error now.
- Added new and separate rate limiting to login (to prevent user enumeration). This rate limiting has a higher default limit of 8. I think it needs a higher default limit (because it is rate limited on every call instead of per email address. And it should be configurable independent from administrator rate limiting. It also needs a lower lifetime value because it is never reset.
- Updated error responses in the `sendMagicLink` endpoint to use the default error encoding middleware.
- The type (`signin`, `signup`, `updateEmail` or `subscribe`) is now stored in the magic link. This is used to prevent signups with a sign in token.
**Notes:**
- Between tests, we truncate the database, but this is not enough for the rate limits to be truly reset. I had to add a method to the spam prevention service to reset all the instances between tests. Not resetting them caused random failures because every login in every test was hitting those spam prevention middlewares and somehow left a trace of that in those instances (even when the brute table is reset). Maybe those instances were doing some in memory caching.
fixes https://github.com/TryGhost/Ghost/issues/14508
This change requires the frontend to send an explicit `emailType` when sending a magic link. We default to `subscribe` (`signin` for invite only sites) for now to remain compatible with the existing behaviour.
**Problem:**
When a member tries to login and that member doesn't exist, we created a new member in the past.
- This caused the creation of duplicate accounts when members were guessing the email address they used.
- This caused the creation of new accounts when using an old impersonation token, login link or email change link that was sent before member deletion.
**Fixed:**
- Trying to login with an email address that doesn't exist will throw an error now.
- Added new and separate rate limiting to login (to prevent user enumeration). This rate limiting has a higher default limit of 8. I think it needs a higher default limit (because it is rate limited on every call instead of per email address. And it should be configurable independent from administrator rate limiting. It also needs a lower lifetime value because it is never reset.
- Updated error responses in the `sendMagicLink` endpoint to use the default error encoding middleware.
- The type (`signin`, `signup`, `updateEmail` or `subscribe`) is now stored in the magic link. This is used to prevent signups with a sign in token.
**Notes:**
- Between tests, we truncate the database, but this is not enough for the rate limits to be truly reset. I had to add a method to the spam prevention service to reset all the instances between tests. Not resetting them caused random failures because every login in every test was hitting those spam prevention middlewares and somehow left a trace of that in those instances (even when the brute table is reset). Maybe those instances were doing some in memory caching.
no issue
- All content-length snapshots should be using the same matcher for consistency - anyContentLength. It's more explicit about what the matcher is all about and might be useful to have content-length matchers in one place if it ever changes (the header value should be a damn digit after all, not a string!) (ref. https://www.rfc-editor.org/rfc/rfc7230#section-3.3.2)
refs https://github.com/TryGhost/Team/issues/2024
Without validation it was possible to send a string of comma separated
email addresses to the endpoint, and an email would be sent to each
address, bypassing any rate limiting.
This bug does not allow for an authentication bypass exploit. It is purely a
spam email concern.
Credit: Sandip Maity <maitysandip925@gmail.com>
closesTryGhost/Team#2007
- uses request context to add referrer source and medium for a new member
- uses integration name as referrer medium if exists
fixes https://github.com/TryGhost/Team/issues/2008
- New column that stores email click tracking at the time it was created
- Improved frontend side checks for when to show analytics
refs https://github.com/TryGhost/Toolbox/issues/425
refs https://github.com/TryGhost/Toolbox/issues/280
- The versioned API responses vary based on requested version (passed in request's 'accept-version' header). shared caches that sit between Ghost's origin server and the browser would be putting responses with same Vary into the same caching bucket, which is incorrect.
- This change makes response's Vary more granular and tells caching mechanisms to take 'Accept-Version' request header into account when caching.
- Informative read on the topic - https://www.fastly.com/blog/getting-most-out-vary-fastly
- renames `refSource`, `refMedium` and `refUrl` to `referrerSource`, `referrerMedium` and `referrerUrl` respectively for consistent naming across files and usages
refs https://github.com/TryGhost/Toolbox/issues/410
- Private cache control was preventing browser or shared caches from storing Content APIs response. The type of data served through the Content API is very much of a "public" nature, so should be cacheable.
- Right now the 'max-age' value of 'cache-control' header is hardcoded to '0', without 'must-revalidate' value, to allow browsers to cache content slightly more aggressively. In the future the 'max-age' value will most-likely become configurable to allow even more aggressive HTTP caching.
refs https://github.com/TryGhost/Toolbox/issues/410
- The 'private' value in 'Cache-Control' response header for all errors made it impossible for shared caches (e.g.: Fastly, Cloudflare) to cache 404 responses efficiently.
- The change substitutes 'max-age=0' which should not effect the browser cache behavior but would allow shared caches to process such requests efficiently.
- A more loose caching logic only applies to 404 responses from GET requests that are not user-specific (non-authenticated, non-cookie containing requests)
closes https://github.com/TryGhost/Team/issues/1942
- Added data fixtures for referrers
- Added new endpoint to fetch referrer stats for a given post: `/stats/referrers/posts/:id`
- Added new ReferrersStatsService, responsible for calculating referrer stats
refs TryGhost/Team#1931
- referrer source, medium and url will be stored in the events table along with rest of attribution data
- stores referrer information on two tables
- `members_created_events` for signups
- `members_subscription_created_events` for paid conversions
closes https://github.com/TryGhost/Team/issues/1933
- Added click_events to activity feed
- Added support for parsing click_events in the frontend
- Moved url parsing (transform ready) to model layer of LinkRedirect
- Moved `getEventTimeline` method to the top of the event repository
- Added description field to parsed events in the frontend (because we need a second line)
- Fixed: member email not returned in comment_event
refs d5f03ec0b1
- underlying error message varies across node versions so the content-length can't be fixed
- applied any-content-length matcher to the right test this time
no issue
- The explore endpoint needs to expose the total amount of published posts
- To be more consistent, this PR creates a PostStats class which is exposed as `stats` method within the PostService; just like it's done with the MemberService
- Moved existing method to return the date of the most recently published post into the stats service
- Updated the explore service test to reflect the new return property
no issue
- added `PostRevsion` model
- duplicated `mobiledoc_revision` creation routine in Post model's onSaving hook to create `post_revision` when model's `lexical` field has changed
- updated `mobiledoc_revision` creation to skip when `lexical` field is populated
no issue
- added `@tryghost/kg-lexical-html-renderer` dependency
- added `lexical` lib following the same pattern as our `mobiledoc` lib
- updated the Post model's `onSaving` hook to generate the `html` value from `lexical` when present
fixes https://github.com/TryGhost/Team/issues/1900
refs https://github.com/TryGhost/Team/issues/1901
- Defaults to the same value as the current email_track_opens setting for existing installations, otherwise defaults to true
- Had to use a custom migration because the `addSetting` helper doesn't support using an existing setting as current value
- Added a minimal UI to change the setting, but this still needs some design magic 🪄✨
- Link replacement is disabled if `email_track_clicks` is disabled. In the future we might consider to still do parial additions, such as source attribution and maybe redirects (to discuss).
no issue
- fixed API returning "Invalid mobiledoc structure" errors when `mobiledoc:null` is sent in the payload alongside `lexical: '{...}'`
- updated Admin's `posts` and `pages` adapters to always add `?formats=mobiledoc,lexical` because the API doesn't return `lexical` by default
- added `lexical` attribute to Admin's Post model
- updated `lexical-editor` controller and related components to work with `lexical` always being a JSON string rather than a parsed object
- updated `<KoenigLexicalEditor>` to pass through the lexical state string as initial state and wired up the `onChange` prop
no issue
- bumped `@tryghost/admin-api-schema` to allow passthrough of the `lexical` property on post and page API endpoints
- prevented saving of blank document in the `mobiledoc` field if `lexical` is provided
- prevented API input containing both `mobiledoc` and `lexical` fields to avoid issues when both are present:
- not possible to know which content is latest/has precedence
- not possible to know which editor should be displayed in Admin
refs 9471384020
- previously added tests (any subsequent matcher updates) for browse endpoint were not using matchers that sufficiently covered the dynamic portions of the body
no issue
- left `mobiledoc` as the only default format added in the post/page input serializers for now to minimize API/test churn during these early stages of lexical development
- tested that the `lexical` field is not returned by default but can be requested via `?formats=lexical`
no issue
- similar to the `mobiledoc` field, the Content API should not return the source `lexical` field if requested via `?formats=`
- renamed `removeMobiledocFormat()` to `removeSourceFormats()` to better match it's behaviour
closes https://github.com/TryGhost/Team/issues/1864
refs https://github.com/TryGhost/Team/issues/1881
- triggers free member email alert via event dispatch from member create method
- passes subscription/stripe data to member creation for paid members so free member alert can be ignored for them
- moves subscription created event being called from webhook controller to `linkSubscription`, allows creating subscription events for all new subscriptions instead of ones just via webhooks
no issue
- Bumped into these tests when doing cleanup in the notifications service. Having full snapshot of requests is useful to have as a sanity check, so migrated this test suite quickly.
closes https://github.com/TryGhost/Team/issues/1772
- The user facing side of comments recently replaced `bio` with `expertise`.
- To remain consistent we replaced all the references of `bio` with `expertise` throughout the codebase.
- This includes a database column name changing migration, within the `members` table.
- Bumped up the comments-ui version to a new minor (0.10.x) as its a breaking change.
fixes https://github.com/TryGhost/Toolbox/issues/356
- this feature allows site Administrators to view a history log of staff
actions on their site so they can audit when and by whom that something happened
- this commit promotes the History log to GA
refs https://github.com/TryGhost/Team/issues/1871
This commit adds a test to the serialize method of `post-emaiserializer`. It checks whether the generated email HTML is valid and standard HTML5 and that all properties are escaped.
To do this validation, I depend on the new `html-validate` dev dependency. Just parsing the HTML with a HTML parser is not enough to guarantee that the HTML is okay.
Apart from that this fixes:
- Removed the sanitizeHTML method and replaced it with normal HTML escaping. We don't want to allow any HTML in the escaped fields. Whereas `sanitizeHTML` still allows valid HTML, but we don't want that and want the same behaviour as on the site. E.g., a post with a title `All your need to know about the <br /> tag` should actually render the same title and non-html content, being `All your need to know about the <br /> tag`
- The file, nft and audio card didn't (always) escape the injected HTML fields (new version @tryghost/kg-default-cards)
- `@tryghost/string` is bumped because it contains the new escapeHtml method
fixes https://github.com/TryGhost/Team/issues/1861
- Moved like and unlike endpoint handling to comments service and controller
- Moved small part of report logic to comments controller
- Added proper 401 authentication error when not authenticated as member
fixes https://github.com/TryGhost/Team/issues/1855
fixes https://github.com/TryGhost/Team/issues/1866
This commit moves all duplicate methods to get the support email address to a single location. Also methods to get the default email domain are moved.
For the location, I initially wanted to put it at the settings service. But that service doesn't feel like the right place. Instead I created a new settings helpers service. This service takes the settingsCache, urlUtils and config and calculates some special 'calculated' settings based on those:
- Support email methods
- Stripe (active) keys / stripe connected (also removed some duplicate code that calculated the keys in a couple of places)
- All the calculated settings are moved to the settings helpers
I'm not 100% confident in whether this is the right place to put the helpers. Suggestions are welcome.
closes: https://github.com/TryGhost/Toolbox/issues/342
refs: 032a26f9f3
refs: 588c9d04e8
- Now that the old `users:no-owner` (now named 'users') is working correctly :)
- Was able to add loginAs[Role] methods for each staff role, so that it's possible to execute tests as that user and check permissions
- Refactored the email preview tests to use the new e2e framework and these methods, as an example
- This fixture is the main user fixture you'd want to use when testing staff roles
- At the moment it has a weird name that makes it less likely people will use it
- A tiny step in trying to make our fixture system make a tiny bit more sense
- This fixture would only work if the roles were inserted by the fixture system
- In most cases, this fixture was adding users without their associated roles
- Now we assume the roles exist already, and that we need to map users to each role
- This will allow us to more easily test user roles in e2e tests
refs https://github.com/TryGhost/Team/issues/1771
We don't have access to `req.brute.reset` due to the way the flow
works, we have one endpoint which sends an email with a magic link,
and another route which handles the login. We don't want to apply
brute force protection to both because our rate limiting is designed
for API requests not web page visits (which is how login is handled).
Because of this we require access to the underlying ExpressBrute
instance exposed by the spam-protection module, so that we can
perform the reset.
refs https://github.com/TryGhost/Team/issues/1074
Rather than relying on the global block to stop malicious actors from
enumerating email addresses to determine who is and isn't a user, we
want our user login brute force protection to be on an IP basis,
rather than tied to the username.
fixes https://github.com/TryGhost/Team/issues/1860
**Problem:**
Members were not able to comment on a post that was only visible for members with a specific tier.
**Causes:**
Content gating was done on models with missing relations.
- The products relation was not loaded on the member when doing content gating
- The tiers relation was not loaded on the post when doing content gating
**Tests:**
- Added for tier-only posts
- Added for paid-only commenting
fixes https://github.com/TryGhost/Team/issues/1859
**Problem:**
When for some reason a member has an active subscription (or legacy comped subscription) for product A, and a comped subscription for product B. You cannot remove comped subscription B.
**Fixed by:**
Updating the API to allow more flexible product changes on members.
- Allow the removal of (comped) products on a member, as long as that product doesn't have a related subscription
- (still) allow the addition of comped products to a member, as long as that member doesn't have other active subscriptions. This matches the existing behaviour, but now this is only checked for added products.
- Includes tests for these edge cases
fixes https://github.com/TryGhost/Team/issues/1679
These endpoints are safe to be removed, as they are only used by the admin app and usage has been removed over there. It is very unlikely that this endpoint has been used in a third party integration (in which case they will get a notification email).
In case there is an issue with the filtering of items in our client
side attribution script, we also check for and remove out of date
items here. This ensures that we do not erroneously attribute signups
or conversions to webpages from more than 24h ago.
closes: https://github.com/TryGhost/Team/issues/1732
- adds a theme helper which outputs a working search button with a standard icon
- the icon adopts whatever the current color is from css, and has a set of default styles
- styles can be overridden with !important or the data attribute
- alternatively, any element in a theme may be turned into a search button by adding data-ghost-search
- this is meant to be a simple tool for non-theme-developers to easily add a search icon to their themes in a way that doesn't require css or html knowledge
refs: 203c8036fa
refs: 1fadbacdec
refs: 22fd7f289c
- There is something seriously weird about how content-length changes...
- It's different on CI to local sometimes...
- This particular test should not change IMO
refs https://github.com/TryGhost/Team/issues/1833
refs https://github.com/TryGhost/Team/issues/1834
We've added the attribution property to subscription and signup events when the
flag is enabled. The attributions resource is fetched by creating multiple relations
on the model, rather than polymorphic as we ran into issues with that as they can't
be nullable/optional.
The parse-member-event structure has been updated to make it easier to work with,
specifically `getObject` is only used when the event is clickable, and there is now a
join property which makes it easier to join the action and the object.
refs https://github.com/TryGhost/Team/issues/1833
refs https://github.com/TryGhost/Team/issues/1834
We've added the attribution property to subscription and signup events when the
flag is enabled. The attributions resource is fetched by creating multiple relations
on the model, rather than polymorphic as we ran into issues with that as they can't
be nullable/optional.
The parse-member-event structure has been updated to make it easier to work with,
specifically `getObject` is only used when the event is clickable, and there is now a
join property which makes it easier to join the action and the object.
refs: https://github.com/TryGhost/Ghost/issues/14882
- I found a common pattern where catch predicates were being used to catch non-existent models in destroy methods, and sometimes elsewhere in the API endpoints
- The use of predicates is deprecated, and we're working to remove them from everywhere, so that we can remove bluebird
- In order to still handle these errors correctly, we needed a small change to mw-error-handler so that it can detect EmptyResponse errors from bookshelf, as well as 404s
Note: there is a small change as a result of this - the context on these errors now says "Resource not found" instead of "{ModelName} not found".
- I think this is acceptable for now, as we will be reviewing these errors in more depth later. It's quite easy to make changes, we just have to decide what with proper design input
refs https://github.com/TryGhost/Team/issues/1825
- adds 3 new columns to users table for storing email alert preferences for member signups/cancellation
- adds column for new member signup alert
- adds column for paid subscription started alert
- adds column for paid subscription canceled alert
- Updated default fixtures and tests for new columns
refs https://github.com/TryGhost/Toolbox/issues/356
- we have a very crude version of this before but it just wasn't
maintainable
- one of the first things I did here was to add `include=resource` on
the API call, so it returns the fields we need without extra API
requests
- after we have the id/slug, I could build a route and model array
dynamically, or return null if we can't redirect to the object (it
doesn't exist)
- copied over and rewrote the deletion test from the legacy file
- added a new test that checks that we get a 404 when attempting to delete an unknown post
- this is a guard to protect and futureproof the API whilst we do refactoring to improve 404 handling from bookshelf
- in turn this is aimed at helping to get rid of a bunch of catch predicates from the API
- I want to start rewriting the post tests using the new e2e framework, but it's quite a big task
- For now I have renamed the existing file, and will use the correct file name for writing modern versions of tests
- Note: I have a specific test that I'd like to add which is far easier to write in the new framework
- This change should facilitate moving forward more with the new framework
refs https://github.com/TryGhost/Toolbox/issues/356
- in order to show data that we might not necessarily still have around
(ie. when you delete a post, you might want the title), we're going to
start utilizing the `context` column
- right now, we store the `primary_name` for deleted events, and we also
store the `setting` `key` and `group` so we can reference it in the
audit log
no issue
- The site locale should be exposed within the public site config in order to handle i18n in third party apps
- Added the locale to Explore service to simplify fetching it when submitting a new site
- this endpoint returns the Ghost version, of which the minor just hit
double digits
- because of this, the content-length size changed, and the snapshot was
incorrect
- we've previously allowed overrides for the content-length to be any number (see
1fadbacdec)
- this commit allows the header to be any number so it doesn't fail when
the Ghost version is incremented
refs https://github.com/TryGhost/Team/issues/1727
- if feature flag is enabled, handles storing expiry date on complimentary subscriptions in `expiry_at` column of `members_products`
- updates the expiry value on both member edit or add with tiers
- expiry is passed as `expiry_at` in `tiers` list of a member
- includes `expiry_at` on tiers data of a member when flag is enabled
refs: 22fd7f289c
- in the mentioned commit I changed the tests so that we don't need to update snapshots for every labs flag change
- this commit does the same for content-length which didn't get picked up locally, but does on CI for some reason
- the goal is to allow the team to add and remove flags without needing to update a random snapshot
refs https://github.com/TryGhost/Team/issues/1822
Exposing the values through the API is restricted behind the alpha flag.
We're exposing the values by default when the flag is enabled for now,
but can reconsider that later.
refs https://github.com/TryGhost/Team/issues/1808
refs https://github.com/TryGhost/Team/issues/1809
refs https://github.com/TryGhost/Team/issues/1820
refs https://github.com/TryGhost/Team/issues/1814
### Changes in `member-events` package
- Added MemberCreatedEvent (event, not model)
- Added SubscriptionCreatedEvent (event, not model)
### Added `member-attribution` package (new)
- Added the AttributionBuilder class which is able to convert a url history to an attribution object (exposed as getAttribution on the service itself, which handles the dependencies)
```
[{
"path": "/",
"time": 123
}]
```
to
```
{
"url": "/",
"id": null,
"type": "url"
}
```
- event handler listens for MemberCreatedEvent and SubscriptionCreatedEvent and creates the corresponding models in the database.
### Changes in `members-api` package
- Added urlHistory to `sendMagicLink` endpoint body + convert the urlHistory to an attribution object that is stored in the tokenData of the magic link (sent by Portal in this PR: https://github.com/TryGhost/Portal/pull/256).
- Added urlHistory to `createCheckoutSession` endpoint + convert the urlHistory to attribution keys that are saved in the Stripe Session metadata (sent by Portal in this PR: https://github.com/TryGhost/Portal/pull/256).
- Added attribution data property to member repository's create method (when a member is created)
- Dispatch MemberCreatedEvent with attribution
### Changes in `members-stripe-service` package (`ghost/stripe`)
- Dispatch SubscriptionCreatedEvent in WebhookController on subscription checkout (with attribution from session metadata)
- prior to this commit, if you add or remove a faeture flag, you also have to update the snapshots for the settings tests
- feature flags are intended to be very easy to add and remove, and so this extra step doesn't fit with our needs
- it's also unnecessary, we don't need to verify the exact contents of the labs setting
- added core and builtin integrations to test fixtures
- allowed passing a custom api key id to generate JWT
- updated admin key auth test to make successful request with a `core` integration, which doesn't work atm because relations are not returned
refs https://github.com/TryGhost/Team/issues/1726
- free trial offers don't need a stripe coupon created for them
- checkout sessions for free trial offers ignore stripe coupon and directly pass the trial days value
- trial days of an offer take precedence over trial days added as default to a tier
refs https://github.com/TryGhost/Team/issues/1723
- Added count.replies to comments
- Added replies endpoint
- Limited returned replies to 3.
- Replaced likes_count with count.likes in comments
- Instead of fetching all the likes of a comment to determine the total count, we'll now use count.likes
- Instead of fetching all the likes of a comment to determine whether a member liked a comment, we'll now use count.liked (which returns the amount of likes of the current member, being 0 or 1). This is mapped to `liked` to make it more natural to work with.
The `members.test.snap` file changed because we no longer include `liked: false` if we didn't fetch the liked relation. And in the comments events of the activity feed the liked property is therefore removed.
These changes requires an update to the `bookshelf-include-count` plugin:
- Updated to also work for nested relations
- This moves the count queries from the `bookshelf-include-count` plugin to the `countRelations` method of each model.
- Updated to keep the counts after saving a model (crud.edit didn't return the counts before)
refs https://github.com/TryGhost/Team/issues/1757
- exposes trial start and end dates in member's subscription object
- allows portal and admin to show member's trial information in UI
refs https://github.com/TryGhost/Team/issues/1745
This is done at the mapper layer, so that the model can be used for the
Admin API - where will probably want to expose the underlying content.
We've also disabled editing of deleted/hidden comments, to avoid
accidentally overriding the comments html when sending up deleted
comments.
closes: https://github.com/TryGhost/Ghost/issues/14980
refs: cc276486f0
- Tenor is now operated by Google, and the old v1 Tenor API has been decommissioned
- At present anyone with a pre-configured tenor integration will get intermittent errors, whilst it is impossible to setup a new tenor API integration
- Sadly old keys do not work with the new API, and new keys do not work with the old API, so there is no happy path forward.
- After this lands, everyone will need to go and get a new Google API Key for Tenor, update their config, and then the integration will work properly again.
- This particular change renames the API key from `publicReadOnlyApiKey` to `googleApiKey` to reflect that the key itself changes in type and behaviour
Co-authored-by: Hannah Wolfe <github.erisds@gmail.com>
refs https://github.com/TryGhost/Team/issues/1716
- Adds the bio field to the API output
- Allow setting bio when updating the member
- Includes new E2E tests for the members API that were missing
refs https://github.com/TryGhost/Team/issues/1724
- storing trial period days allows site owners to give free trial for N days to all members signing up on a tier
- by default, all tiers have 0 trial period days(same as no trial)
refs https://github.com/TryGhost/Team/issues/1695
When a post does not have any comments we were not returning any data
from the API, which would cause issues with the comment counts helper
frontend script. This updates the endpoint to always include the count
when explicitly requesting the count for specific posts.
We've also pulled the logic out into a stats service so that the endpoint
can just refer to the controller.
refs https://github.com/TryGhost/Team/issues/1680
- paywall card in Admin now inserts cta and restricts content for newsletters as well
- mimics paywall behavior in posts for newsletters
fixes https://github.com/TryGhost/Toolbox/issues/150
- up until now, the test framework has copied all theme fixtures to the
test directory when it boots Ghost
- the vast majority of tests don't need all the themes, so this is quite
a wasteful operation
- this commit disables copying all themes by default, and provides the
`copyThemes` boot option to enable this
- also adds a `copySettings` option, and defaults `redirectsFile` to
false to further reduce the number of file copies
refs https://github.com/TryGhost/Team/issues/1695
This property can be used by theme developers to determine if comments
are available for the currently logged in member. It follows the same
logic as used internally in the comments helper, so that they can be
used interchangeably
refs https://github.com/TryGhost/Team/issues/1688
We've moved the BREAD logic out of the endpoint and into a controller which
interfaces with the `frame` object from our API framework. The service handles
the core logic of comments, and has been updated with several fixes. This
separation means we keep the HTTP API logic and the underlying comments logic
decoupled.
We've also updated the naming to make it clear that it is part of the members api.
Permissions have been implemented, ensuring that members cannot create comments
if they do not have the required access, but they are able to edit their existing comments,
regardless of access.
The edited_at field is now correctly updated when a comment is edited.
